drivers/clk/clk-cdce925.c

   1 /*
   2  * Driver for TI Dual PLL CDCE925 clock synthesizer
   3  *
   4  * This driver always connects the Y1 to the input clock, Y2/Y3 to PLL1
   5  * and Y4/Y5 to PLL2. PLL frequency is set on a first-come-first-serve
   6  * basis. Clients can directly request any frequency that the chip can
   7  * deliver using the standard clk framework. In addition, the device can
   8  * be configured and activated via the devicetree.
   9  *
  10  * Copyright (C) 2014, Topic Embedded Products
  11  * Licenced under GPL
  12  */
  13 #include <linux/clk-provider.h>
  14 #include <linux/delay.h>
  15 #include <linux/module.h>
  16 #include <linux/i2c.h>
  17 #include <linux/regmap.h>
  18 #include <linux/slab.h>
  19 #include <linux/gcd.h>
  20
  21 /* The chip has 2 PLLs which can be routed through dividers to 5 outputs.
  22  * Model this as 2 PLL clocks which are parents to the outputs.
  23  */
  24 #define NUMBER_OF_PLLS  2
  25 #define NUMBER_OF_OUTPUTS       5
  26
  27 #define CDCE925_REG_GLOBAL1     0x01
  28 #define CDCE925_REG_Y1SPIPDIVH  0x02
  29 #define CDCE925_REG_PDIVL       0x03
  30 #define CDCE925_REG_XCSEL       0x05
  31 /* PLL parameters start at 0x10, steps of 0x10 */
  32 #define CDCE925_OFFSET_PLL      0x10
  33 /* Add CDCE925_OFFSET_PLL * (pll) to these registers before sending */
  34 #define CDCE925_PLL_MUX_OUTPUTS 0x14
  35 #define CDCE925_PLL_MULDIV      0x18
  36
  37 #define CDCE925_PLL_FREQUENCY_MIN        80000000ul
  38 #define CDCE925_PLL_FREQUENCY_MAX       230000000ul
  39 struct clk_cdce925_chip;
  40
  41 struct clk_cdce925_output {
  42         struct clk_hw hw;
  43         struct clk_cdce925_chip *chip;
  44         u8 index;
  45         u16 pdiv; /* 1..127 for Y2-Y5; 1..1023 for Y1 */
  46 };
  47 #define to_clk_cdce925_output(_hw) \
  48         container_of(_hw, struct clk_cdce925_output, hw)
  49
  50 struct clk_cdce925_pll {
  51         struct clk_hw hw;
  52         struct clk_cdce925_chip *chip;
  53         u8 index;
  54         u16 m;   /* 1..511 */
  55         u16 n;   /* 1..4095 */
  56 };
  57 #define to_clk_cdce925_pll(_hw) container_of(_hw, struct clk_cdce925_pll, hw)
  58
  59 struct clk_cdce925_chip {
  60         struct regmap *regmap;
  61         struct i2c_client *i2c_client;
  62         struct clk_cdce925_pll pll[NUMBER_OF_PLLS];
  63         struct clk_cdce925_output clk[NUMBER_OF_OUTPUTS];
  64         struct clk *dt_clk[NUMBER_OF_OUTPUTS];
  65         struct clk_onecell_data onecell;
  66 };
  67
  68 /* ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** */
  69
  70 static unsigned long cdce925_pll_calculate_rate(unsigned long parent_rate,
  71         u16 n, u16 m)
  72 {
  73         if ((!m || !n) || (m == n))
  74                 return parent_rate; /* In bypass mode runs at same frequency */
  75         return mult_frac(parent_rate, (unsigned long)n, (unsigned long)m);
  76 }
  77
  78 static unsigned long cdce925_pll_recalc_rate(struct clk_hw *hw,
  79                 unsigned long parent_rate)
  80 {
  81         /* Output frequency of PLL is Fout = (Fin/Pdiv)*(N/M) */
  82         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
  83
  84         return cdce925_pll_calculate_rate(parent_rate, data->n, data->m);
  85 }
  86
  87 static void cdce925_pll_find_rate(unsigned long rate,
  88                 unsigned long parent_rate, u16 *n, u16 *m)
  89 {
  90         unsigned long un;
  91         unsigned long um;
  92         unsigned long g;
  93
  94         if (rate <= parent_rate) {
  95                 /* Can always deliver parent_rate in bypass mode */
  96                 rate = parent_rate;
  97                 *n = 0;
  98                 *m = 0;
  99         } else {
 100                 /* In PLL mode, need to apply min/max range */
 101                 if (rate < CDCE925_PLL_FREQUENCY_MIN)
 102                         rate = CDCE925_PLL_FREQUENCY_MIN;
 103                 else if (rate > CDCE925_PLL_FREQUENCY_MAX)
 104                         rate = CDCE925_PLL_FREQUENCY_MAX;
 105
 106                 g = gcd(rate, parent_rate);
 107                 um = parent_rate / g;
 108                 un = rate / g;
 109                 /* When outside hw range, reduce to fit (rounding errors) */
 110                 while ((un > 4095) || (um > 511)) {
 111                         un >>= 1;
 112                         um >>= 1;
 113                 }
 114                 if (un == 0)
 115                         un = 1;
 116                 if (um == 0)
 117                         um = 1;
 118
 119                 *n = un;
 120                 *m = um;
 121         }
 122 }
 123
 124 static long cdce925_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 125                 unsigned long *parent_rate)
 126 {
 127         u16 n, m;
 128
 129         cdce925_pll_find_rate(rate, *parent_rate, &n, &m);
 130         return (long)cdce925_pll_calculate_rate(*parent_rate, n, m);
 131 }
 132
 133 static int cdce925_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 134                 unsigned long parent_rate)
 135 {
 136         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 137
 138         if (!rate || (rate == parent_rate)) {
 139                 data->m = 0; /* Bypass mode */
 140                 data->n = 0;
 141                 return 0;
 142         }
 143
 144         if ((rate < CDCE925_PLL_FREQUENCY_MIN) ||
 145                 (rate > CDCE925_PLL_FREQUENCY_MAX)) {
 146                 pr_debug("%s: rate %lu outside PLL range.\n", __func__, rate);
 147                 return -EINVAL;
 148         }
 149
 150         if (rate < parent_rate) {
 151                 pr_debug("%s: rate %lu less than parent rate %lu.\n", __func__,
 152                         rate, parent_rate);
 153                 return -EINVAL;
 154         }
 155
 156         cdce925_pll_find_rate(rate, parent_rate, &data->n, &data->m);
 157         return 0;
 158 }
 159
 160
 161 /* calculate p = max(0, 4 - int(log2 (n/m))) */
 162 static u8 cdce925_pll_calc_p(u16 n, u16 m)
 163 {
 164         u8 p;
 165         u16 r = n / m;
 166
 167         if (r >= 16)
 168                 return 0;
 169         p = 4;
 170         while (r > 1) {
 171                 r >>= 1;
 172                 --p;
 173         }
 174         return p;
 175 }
 176
 177 /* Returns VCO range bits for VCO1_0_RANGE */
 178 static u8 cdce925_pll_calc_range_bits(struct clk_hw *hw, u16 n, u16 m)
 179 {
 180         struct clk *parent = clk_get_parent(hw->clk);
 181         unsigned long rate = clk_get_rate(parent);
 182
 183         rate = mult_frac(rate, (unsigned long)n, (unsigned long)m);
 184         if (rate >= 175000000)
 185                 return 0x3;
 186         if (rate >= 150000000)
 187                 return 0x02;
 188         if (rate >= 125000000)
 189                 return 0x01;
 190         return 0x00;
 191 }
 192
 193 /* I2C clock, hence everything must happen in (un)prepare because this
 194  * may sleep */
 195 static int cdce925_pll_prepare(struct clk_hw *hw)
 196 {
 197         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 198         u16 n = data->n;
 199         u16 m = data->m;
 200         u16 r;
 201         u8 q;
 202         u8 p;
 203         u16 nn;
 204         u8 pll[4]; /* Bits are spread out over 4 byte registers */
 205         u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;
 206         unsigned i;
 207
 208         if ((!m || !n) || (m == n)) {
 209                 /* Set PLL mux to bypass mode, leave the rest as is */
 210                 regmap_update_bits(data->chip->regmap,
 211                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
 212         } else {
 213                 /* According to data sheet: */
 214                 /* p = max(0, 4 - int(log2 (n/m))) */
 215                 p = cdce925_pll_calc_p(n, m);
 216                 /* nn = n * 2^p */
 217                 nn = n * BIT(p);
 218                 /* q = int(nn/m) */
 219                 q = nn / m;
 220                 if ((q < 16) || (1 > 64)) {
 221                         pr_debug("%s invalid q=%d\n", __func__, q);
 222                         return -EINVAL;
 223                 }
 224                 r = nn - (m*q);
 225                 if (r > 511) {
 226                         pr_debug("%s invalid r=%d\n", __func__, r);
 227                         return -EINVAL;
 228                 }
 229                 pr_debug("%s n=%d m=%d p=%d q=%d r=%d\n", __func__,
 230                         n, m, p, q, r);
 231                 /* encode into register bits */
 232                 pll[0] = n >> 4;
 233                 pll[1] = ((n & 0x0F) << 4) | ((r >> 5) & 0x0F);
 234                 pll[2] = ((r & 0x1F) << 3) | ((q >> 3) & 0x07);
 235                 pll[3] = ((q & 0x07) << 5) | (p << 2) |
 236                                 cdce925_pll_calc_range_bits(hw, n, m);
 237                 /* Write to registers */
 238                 for (i = 0; i < ARRAY_SIZE(pll); ++i)
 239                         regmap_write(data->chip->regmap,
 240                                 reg_ofs + CDCE925_PLL_MULDIV + i, pll[i]);
 241                 /* Enable PLL */
 242                 regmap_update_bits(data->chip->regmap,
 243                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x00);
 244         }
 245
 246         return 0;
 247 }
 248
 249 static void cdce925_pll_unprepare(struct clk_hw *hw)
 250 {
 251         struct clk_cdce925_pll *data = to_clk_cdce925_pll(hw);
 252         u8 reg_ofs = data->index * CDCE925_OFFSET_PLL;
 253
 254         regmap_update_bits(data->chip->regmap,
 255                         reg_ofs + CDCE925_PLL_MUX_OUTPUTS, 0x80, 0x80);
 256 }
 257
 258 static const struct clk_ops cdce925_pll_ops = {
 259         .prepare = cdce925_pll_prepare,
 260         .unprepare = cdce925_pll_unprepare,
 261         .recalc_rate = cdce925_pll_recalc_rate,
 262         .round_rate = cdce925_pll_round_rate,
 263         .set_rate = cdce925_pll_set_rate,
 264 };
 265
 266
 267 static void cdce925_clk_set_pdiv(struct clk_cdce925_output *data, u16 pdiv)
 268 {
 269         switch (data->index) {
 270         case 0:
 271                 regmap_update_bits(data->chip->regmap,
 272                         CDCE925_REG_Y1SPIPDIVH,
 273                         0x03, (pdiv >> 8) & 0x03);
 274                 regmap_write(data->chip->regmap, 0x03, pdiv & 0xFF);
 275                 break;
 276         case 1:
 277                 regmap_update_bits(data->chip->regmap, 0x16, 0x7F, pdiv);
 278                 break;
 279         case 2:
 280                 regmap_update_bits(data->chip->regmap, 0x17, 0x7F, pdiv);
 281                 break;
 282         case 3:
 283                 regmap_update_bits(data->chip->regmap, 0x26, 0x7F, pdiv);
 284                 break;
 285         case 4:
 286                 regmap_update_bits(data->chip->regmap, 0x27, 0x7F, pdiv);
 287                 break;
 288         }
 289 }
 290
 291 static void cdce925_clk_activate(struct clk_cdce925_output *data)
 292 {
 293         switch (data->index) {
 294         case 0:
 295                 regmap_update_bits(data->chip->regmap,
 296                         CDCE925_REG_Y1SPIPDIVH, 0x0c, 0x0c);
 297                 break;
 298         case 1:
 299         case 2:
 300                 regmap_update_bits(data->chip->regmap, 0x14, 0x03, 0x03);
 301                 break;
 302         case 3:
 303         case 4:
 304                 regmap_update_bits(data->chip->regmap, 0x24, 0x03, 0x03);
 305                 break;
 306         }
 307 }
 308
 309 static int cdce925_clk_prepare(struct clk_hw *hw)
 310 {
 311         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 312
 313         cdce925_clk_set_pdiv(data, data->pdiv);
 314         cdce925_clk_activate(data);
 315         return 0;
 316 }
 317
 318 static void cdce925_clk_unprepare(struct clk_hw *hw)
 319 {
 320         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 321
 322         /* Disable clock by setting divider to "0" */
 323         cdce925_clk_set_pdiv(data, 0);
 324 }
 325
 326 static unsigned long cdce925_clk_recalc_rate(struct clk_hw *hw,
 327                 unsigned long parent_rate)
 328 {
 329         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 330
 331         if (data->pdiv)
 332                 return parent_rate / data->pdiv;
 333         return 0;
 334 }
 335
 336 static u16 cdce925_calc_divider(unsigned long rate,
 337                 unsigned long parent_rate)
 338 {
 339         unsigned long divider;
 340
 341         if (!rate)
 342                 return 0;
 343         if (rate >= parent_rate)
 344                 return 1;
 345
 346         divider = DIV_ROUND_CLOSEST(parent_rate, rate);
 347         if (divider > 0x7F)
 348                 divider = 0x7F;
 349
 350         return (u16)divider;
 351 }
 352
 353 static unsigned long cdce925_clk_best_parent_rate(
 354         struct clk_hw *hw, unsigned long rate)
 355 {
 356         struct clk *pll = clk_get_parent(hw->clk);
 357         struct clk *root = clk_get_parent(pll);
 358         unsigned long root_rate = clk_get_rate(root);
 359         unsigned long best_rate_error = rate;
 360         u16 pdiv_min;
 361         u16 pdiv_max;
 362         u16 pdiv_best;
 363         u16 pdiv_now;
 364
 365         if (root_rate % rate == 0)
 366                 return root_rate; /* Don't need the PLL, use bypass */
 367
 368         pdiv_min = (u16)max(1ul, DIV_ROUND_UP(CDCE925_PLL_FREQUENCY_MIN, rate));
 369         pdiv_max = (u16)min(127ul, CDCE925_PLL_FREQUENCY_MAX / rate);
 370
 371         if (pdiv_min > pdiv_max)
 372                 return 0; /* No can do? */
 373
 374         pdiv_best = pdiv_min;
 375         for (pdiv_now = pdiv_min; pdiv_now < pdiv_max; ++pdiv_now) {
 376                 unsigned long target_rate = rate * pdiv_now;
 377                 long pll_rate = clk_round_rate(pll, target_rate);
 378                 unsigned long actual_rate;
 379                 unsigned long rate_error;
 380
 381                 if (pll_rate <= 0)
 382                         continue;
 383                 actual_rate = pll_rate / pdiv_now;
 384                 rate_error = abs((long)actual_rate - (long)rate);
 385                 if (rate_error < best_rate_error) {
 386                         pdiv_best = pdiv_now;
 387                         best_rate_error = rate_error;
 388                 }
 389                 /* TODO: Consider PLL frequency based on smaller n/m values
 390                  * and pick the better one if the error is equal */
 391         }
 392
 393         return rate * pdiv_best;
 394 }
 395
 396 static long cdce925_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 397                 unsigned long *parent_rate)
 398 {
 399         unsigned long l_parent_rate = *parent_rate;
 400         u16 divider = cdce925_calc_divider(rate, l_parent_rate);
 401
 402         if (l_parent_rate / divider != rate) {
 403                 l_parent_rate = cdce925_clk_best_parent_rate(hw, rate);
 404                 divider = cdce925_calc_divider(rate, l_parent_rate);
 405                 *parent_rate = l_parent_rate;
 406         }
 407
 408         if (divider)
 409                 return (long)(l_parent_rate / divider);
 410         return 0;
 411 }
 412
 413 static int cdce925_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 414                 unsigned long parent_rate)
 415 {
 416         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 417
 418         data->pdiv = cdce925_calc_divider(rate, parent_rate);
 419
 420         return 0;
 421 }
 422
 423 static const struct clk_ops cdce925_clk_ops = {
 424         .prepare = cdce925_clk_prepare,
 425         .unprepare = cdce925_clk_unprepare,
 426         .recalc_rate = cdce925_clk_recalc_rate,
 427         .round_rate = cdce925_clk_round_rate,
 428         .set_rate = cdce925_clk_set_rate,
 429 };
 430
 431
 432 static u16 cdce925_y1_calc_divider(unsigned long rate,
 433                 unsigned long parent_rate)
 434 {
 435         unsigned long divider;
 436
 437         if (!rate)
 438                 return 0;
 439         if (rate >= parent_rate)
 440                 return 1;
 441
 442         divider = DIV_ROUND_CLOSEST(parent_rate, rate);
 443         if (divider > 0x3FF) /* Y1 has 10-bit divider */
 444                 divider = 0x3FF;
 445
 446         return (u16)divider;
 447 }
 448
 449 static long cdce925_clk_y1_round_rate(struct clk_hw *hw, unsigned long rate,
 450                 unsigned long *parent_rate)
 451 {
 452         unsigned long l_parent_rate = *parent_rate;
 453         u16 divider = cdce925_y1_calc_divider(rate, l_parent_rate);
 454
 455         if (divider)
 456                 return (long)(l_parent_rate / divider);
 457         return 0;
 458 }
 459
 460 static int cdce925_clk_y1_set_rate(struct clk_hw *hw, unsigned long rate,
 461                 unsigned long parent_rate)
 462 {
 463         struct clk_cdce925_output *data = to_clk_cdce925_output(hw);
 464
 465         data->pdiv = cdce925_y1_calc_divider(rate, parent_rate);
 466
 467         return 0;
 468 }
 469
 470 static const struct clk_ops cdce925_clk_y1_ops = {
 471         .prepare = cdce925_clk_prepare,
 472         .unprepare = cdce925_clk_unprepare,
 473         .recalc_rate = cdce925_clk_recalc_rate,
 474         .round_rate = cdce925_clk_y1_round_rate,
 475         .set_rate = cdce925_clk_y1_set_rate,
 476 };
 477
 478
 479 static struct regmap_config cdce925_regmap_config = {
 480         .name = "configuration0",
 481         .reg_bits = 8,
 482         .val_bits = 8,
 483         .cache_type = REGCACHE_RBTREE,
 484         .max_register = 0x2F,
 485 };
 486
 487 #define CDCE925_I2C_COMMAND_BLOCK_TRANSFER      0x00
 488 #define CDCE925_I2C_COMMAND_BYTE_TRANSFER       0x80
 489
 490 static int cdce925_regmap_i2c_write(
 491         void *context, const void *data, size_t count)
 492 {
 493         struct device *dev = context;
 494         struct i2c_client *i2c = to_i2c_client(dev);
 495         int ret;
 496         u8 reg_data[2];
 497
 498         if (count != 2)
 499                 return -ENOTSUPP;
 500
 501         /* First byte is command code */
 502         reg_data[0] = CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)data)[0];
 503         reg_data[1] = ((u8 *)data)[1];
 504
 505         dev_dbg(&i2c->dev, "%s(%zu) %#x %#x\n", __func__, count,
 506                         reg_data[0], reg_data[1]);
 507
 508         ret = i2c_master_send(i2c, reg_data, count);
 509         if (likely(ret == count))
 510                 return 0;
 511         else if (ret < 0)
 512                 return ret;
 513         else
 514                 return -EIO;
 515 }
 516
 517 static int cdce925_regmap_i2c_read(void *context,
 518            const void *reg, size_t reg_size, void *val, size_t val_size)
 519 {
 520         struct device *dev = context;
 521         struct i2c_client *i2c = to_i2c_client(dev);
 522         struct i2c_msg xfer[2];
 523         int ret;
 524         u8 reg_data[2];
 525
 526         if (reg_size != 1)
 527                 return -ENOTSUPP;
 528
 529         xfer[0].addr = i2c->addr;
 530         xfer[0].flags = 0;
 531         xfer[0].buf = reg_data;
 532         if (val_size == 1) {
 533                 reg_data[0] =
 534                         CDCE925_I2C_COMMAND_BYTE_TRANSFER | ((u8 *)reg)[0];
 535                 xfer[0].len = 1;
 536         } else {
 537                 reg_data[0] =
 538                         CDCE925_I2C_COMMAND_BLOCK_TRANSFER | ((u8 *)reg)[0];
 539                 reg_data[1] = val_size;
 540                 xfer[0].len = 2;
 541         }
 542
 543         xfer[1].addr = i2c->addr;
 544         xfer[1].flags = I2C_M_RD;
 545         xfer[1].len = val_size;
 546         xfer[1].buf = val;
 547
 548         ret = i2c_transfer(i2c->adapter, xfer, 2);
 549         if (likely(ret == 2)) {
 550                 dev_dbg(&i2c->dev, "%s(%zu, %zu) %#x %#x\n", __func__,
 551                                 reg_size, val_size, reg_data[0], *((u8 *)val));
 552                 return 0;
 553         } else if (ret < 0)
 554                 return ret;
 555         else
 556                 return -EIO;
 557 }
 558
 559 /* The CDCE925 uses a funky way to read/write registers. Bulk mode is
 560  * just weird, so just use the single byte mode exclusively. */
 561 static struct regmap_bus regmap_cdce925_bus = {
 562         .write = cdce925_regmap_i2c_write,
 563         .read = cdce925_regmap_i2c_read,
 564 };
 565
 566 static int cdce925_probe(struct i2c_client *client,
 567                 const struct i2c_device_id *id)
 568 {
 569         struct clk_cdce925_chip *data;
 570         struct device_node *node = client->dev.of_node;
 571         const char *parent_name;
 572         const char *pll_clk_name[NUMBER_OF_PLLS] = {NULL,};
 573         struct clk_init_data init;
 574         struct clk *clk;
 575         u32 value;
 576         int i;
 577         int err;
 578         struct device_node *np_output;
 579         char child_name[6];
 580
 581         dev_dbg(&client->dev, "%s\n", __func__);
 582         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 583         if (!data)
 584                 return -ENOMEM;
 585
 586         data->i2c_client = client;
 587         data->regmap = devm_regmap_init(&client->dev, &regmap_cdce925_bus,
 588                         &client->dev, &cdce925_regmap_config);
 589         if (IS_ERR(data->regmap)) {
 590                 dev_err(&client->dev, "failed to allocate register map\n");
 591                 return PTR_ERR(data->regmap);
 592         }
 593         i2c_set_clientdata(client, data);
 594
 595         parent_name = of_clk_get_parent_name(node, 0);
 596         if (!parent_name) {
 597                 dev_err(&client->dev, "missing parent clock\n");
 598                 return -ENODEV;
 599         }
 600         dev_dbg(&client->dev, "parent is: %s\n", parent_name);
 601
 602         if (of_property_read_u32(node, "xtal-load-pf", &value) == 0)
 603                 regmap_write(data->regmap,
 604                         CDCE925_REG_XCSEL, (value << 3) & 0xF8);
 605         /* PWDN bit */
 606         regmap_update_bits(data->regmap, CDCE925_REG_GLOBAL1, BIT(4), 0);
 607
 608         /* Set input source for Y1 to be the XTAL */
 609         regmap_update_bits(data->regmap, 0x02, BIT(7), 0);
 610
 611         init.ops = &cdce925_pll_ops;
 612         init.flags = 0;
 613         init.parent_names = &parent_name;
 614         init.num_parents = parent_name ? 1 : 0;
 615
 616         /* Register PLL clocks */
 617         for (i = 0; i < NUMBER_OF_PLLS; ++i) {
 618                 pll_clk_name[i] = kasprintf(GFP_KERNEL, "%s.pll%d",
 619                         client->dev.of_node->name, i);
 620                 init.name = pll_clk_name[i];
 621                 data->pll[i].chip = data;
 622                 data->pll[i].hw.init = &init;
 623                 data->pll[i].index = i;
 624                 clk = devm_clk_register(&client->dev, &data->pll[i].hw);
 625                 if (IS_ERR(clk)) {
 626                         dev_err(&client->dev, "Failed register PLL %d\n", i);
 627                         err = PTR_ERR(clk);
 628                         goto error;
 629                 }
 630                 sprintf(child_name, "PLL%d", i+1);
 631                 np_output = of_get_child_by_name(node, child_name);
 632                 if (!np_output)
 633                         continue;
 634                 if (!of_property_read_u32(np_output,
 635                         "clock-frequency", &value)) {
 636                         err = clk_set_rate(clk, value);
 637                         if (err)
 638                                 dev_err(&client->dev,
 639                                         "unable to set PLL frequency %ud\n",
 640                                         value);
 641                 }
 642                 if (!of_property_read_u32(np_output,
 643                         "spread-spectrum", &value)) {
 644                         u8 flag = of_property_read_bool(np_output,
 645                                 "spread-spectrum-center") ? 0x80 : 0x00;
 646                         regmap_update_bits(data->regmap,
 647                                 0x16 + (i*CDCE925_OFFSET_PLL),
 648                                 0x80, flag);
 649                         regmap_update_bits(data->regmap,
 650                                 0x12 + (i*CDCE925_OFFSET_PLL),
 651                                 0x07, value & 0x07);
 652                 }
 653         }
 654
 655         /* Register output clock Y1 */
 656         init.ops = &cdce925_clk_y1_ops;
 657         init.flags = 0;
 658         init.num_parents = 1;
 659         init.parent_names = &parent_name; /* Mux Y1 to input */
 660         init.name = kasprintf(GFP_KERNEL, "%s.Y1", client->dev.of_node->name);
 661         data->clk[0].chip = data;
 662         data->clk[0].hw.init = &init;
 663         data->clk[0].index = 0;
 664         data->clk[0].pdiv = 1;
 665         clk = devm_clk_register(&client->dev, &data->clk[0].hw);
 666         kfree(init.name); /* clock framework made a copy of the name */
 667         if (IS_ERR(clk)) {
 668                 dev_err(&client->dev, "clock registration Y1 failed\n");
 669                 err = PTR_ERR(clk);
 670                 goto error;
 671         }
 672         data->dt_clk[0] = clk;
 673
 674         /* Register output clocks Y2 .. Y5*/
 675         init.ops = &cdce925_clk_ops;
 676         init.flags = CLK_SET_RATE_PARENT;
 677         init.num_parents = 1;
 678         for (i = 1; i < NUMBER_OF_OUTPUTS; ++i) {
 679                 init.name = kasprintf(GFP_KERNEL, "%s.Y%d",
 680                         client->dev.of_node->name, i+1);
 681                 data->clk[i].chip = data;
 682                 data->clk[i].hw.init = &init;
 683                 data->clk[i].index = i;
 684                 data->clk[i].pdiv = 1;
 685                 switch (i) {
 686                 case 1:
 687                 case 2:
 688                         /* Mux Y2/3 to PLL1 */
 689                         init.parent_names = &pll_clk_name[0];
 690                         break;
 691                 case 3:
 692                 case 4:
 693                         /* Mux Y4/5 to PLL2 */
 694                         init.parent_names = &pll_clk_name[1];
 695                         break;
 696                 }
 697                 clk = devm_clk_register(&client->dev, &data->clk[i].hw);
 698                 kfree(init.name); /* clock framework made a copy of the name */
 699                 if (IS_ERR(clk)) {
 700                         dev_err(&client->dev, "clock registration failed\n");
 701                         err = PTR_ERR(clk);
 702                         goto error;
 703                 }
 704                 data->dt_clk[i] = clk;
 705         }
 706
 707         /* Register the output clocks */
 708         data->onecell.clk_num = NUMBER_OF_OUTPUTS;
 709         data->onecell.clks = data->dt_clk;
 710         err = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,
 711                 &data->onecell);
 712         if (err)
 713                 dev_err(&client->dev, "unable to add OF clock provider\n");
 714
 715         err = 0;
 716
 717 error:
 718         for (i = 0; i < NUMBER_OF_PLLS; ++i)
 719                 /* clock framework made a copy of the name */
 720                 kfree(pll_clk_name[i]);
 721
 722         return err;
 723 }
 724
 725 static const struct i2c_device_id cdce925_id[] = {
 726         { "cdce925", 0 },
 727         { }
 728 };
 729 MODULE_DEVICE_TABLE(i2c, cdce925_id);
 730
 731 static const struct of_device_id clk_cdce925_of_match[] = {
 732         { .compatible = "ti,cdce925" },
 733         { },
 734 };
 735 MODULE_DEVICE_TABLE(of, clk_cdce925_of_match);
 736
 737 static struct i2c_driver cdce925_driver = {
 738         .driver = {
 739                 .name = "cdce925",
 740                 .of_match_table = of_match_ptr(clk_cdce925_of_match),
 741         },
 742         .probe          = cdce925_probe,
 743         .id_table       = cdce925_id,
 744 };
 745 module_i2c_driver(cdce925_driver);
 746
 747 MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
 748 MODULE_DESCRIPTION("cdce925 driver");
 749 MODULE_LICENSE("GPL");