drivers/cpufreq/pmac32-cpufreq.c

   1 /*
   2  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   3  *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  *
   9  * TODO: Need a big cleanup here. Basically, we need to have different
  10  * cpufreq_driver structures for the different type of HW instead of the
  11  * current mess. We also need to better deal with the detection of the
  12  * type of machine.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/types.h>
  18 #include <linux/errno.h>
  19 #include <linux/kernel.h>
  20 #include <linux/delay.h>
  21 #include <linux/sched.h>
  22 #include <linux/adb.h>
  23 #include <linux/pmu.h>
  24 #include <linux/cpufreq.h>
  25 #include <linux/init.h>
  26 #include <linux/device.h>
  27 #include <linux/hardirq.h>
  28 #include <asm/prom.h>
  29 #include <asm/machdep.h>
  30 #include <asm/irq.h>
  31 #include <asm/pmac_feature.h>
  32 #include <asm/mmu_context.h>
  33 #include <asm/sections.h>
  34 #include <asm/cputable.h>
  35 #include <asm/time.h>
  36 #include <asm/mpic.h>
  37 #include <asm/keylargo.h>
  38 #include <asm/switch_to.h>
  39
  40 /* WARNING !!! This will cause calibrate_delay() to be called,
  41  * but this is an __init function ! So you MUST go edit
  42  * init/main.c to make it non-init before enabling DEBUG_FREQ
  43  */
  44 #undef DEBUG_FREQ
  45
  46 extern void low_choose_7447a_dfs(int dfs);
  47 extern void low_choose_750fx_pll(int pll);
  48 extern void low_sleep_handler(void);
  49
  50 /*
  51  * Currently, PowerMac cpufreq supports only high & low frequencies
  52  * that are set by the firmware
  53  */
  54 static unsigned int low_freq;
  55 static unsigned int hi_freq;
  56 static unsigned int cur_freq;
  57 static unsigned int sleep_freq;
  58 static unsigned long transition_latency;
  59
  60 /*
  61  * Different models uses different mechanisms to switch the frequency
  62  */
  63 static int (*set_speed_proc)(int low_speed);
  64 static unsigned int (*get_speed_proc)(void);
  65
  66 /*
  67  * Some definitions used by the various speedprocs
  68  */
  69 static u32 voltage_gpio;
  70 static u32 frequency_gpio;
  71 static u32 slew_done_gpio;
  72 static int no_schedule;
  73 static int has_cpu_l2lve;
  74 static int is_pmu_based;
  75
  76 /* There are only two frequency states for each processor. Values
  77  * are in kHz for the time being.
  78  */
  79 #define CPUFREQ_HIGH                  0
  80 #define CPUFREQ_LOW                   1
  81
  82 static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
  83         {CPUFREQ_HIGH,          0},
  84         {CPUFREQ_LOW,           0},
  85         {0,                     CPUFREQ_TABLE_END},
  86 };
  87
  88 static struct freq_attr* pmac_cpu_freqs_attr[] = {
  89         &cpufreq_freq_attr_scaling_available_freqs,
  90         NULL,
  91 };
  92
  93 static inline void local_delay(unsigned long ms)
  94 {
  95         if (no_schedule)
  96                 mdelay(ms);
  97         else
  98                 msleep(ms);
  99 }
 100
 101 #ifdef DEBUG_FREQ
 102 static inline void debug_calc_bogomips(void)
 103 {
 104         /* This will cause a recalc of bogomips and display the
 105          * result. We backup/restore the value to avoid affecting the
 106          * core cpufreq framework's own calculation.
 107          */
 108         unsigned long save_lpj = loops_per_jiffy;
 109         calibrate_delay();
 110         loops_per_jiffy = save_lpj;
 111 }
 112 #endif /* DEBUG_FREQ */
 113
 114 /* Switch CPU speed under 750FX CPU control
 115  */
 116 static int cpu_750fx_cpu_speed(int low_speed)
 117 {
 118         u32 hid2;
 119
 120         if (low_speed == 0) {
 121                 /* ramping up, set voltage first */
 122                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 123                 /* Make sure we sleep for at least 1ms */
 124                 local_delay(10);
 125
 126                 /* tweak L2 for high voltage */
 127                 if (has_cpu_l2lve) {
 128                         hid2 = mfspr(SPRN_HID2);
 129                         hid2 &= ~0x2000;
 130                         mtspr(SPRN_HID2, hid2);
 131                 }
 132         }
 133 #ifdef CONFIG_6xx
 134         low_choose_750fx_pll(low_speed);
 135 #endif
 136         if (low_speed == 1) {
 137                 /* tweak L2 for low voltage */
 138                 if (has_cpu_l2lve) {
 139                         hid2 = mfspr(SPRN_HID2);
 140                         hid2 |= 0x2000;
 141                         mtspr(SPRN_HID2, hid2);
 142                 }
 143
 144                 /* ramping down, set voltage last */
 145                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 146                 local_delay(10);
 147         }
 148
 149         return 0;
 150 }
 151
 152 static unsigned int cpu_750fx_get_cpu_speed(void)
 153 {
 154         if (mfspr(SPRN_HID1) & HID1_PS)
 155                 return low_freq;
 156         else
 157                 return hi_freq;
 158 }
 159
 160 /* Switch CPU speed using DFS */
 161 static int dfs_set_cpu_speed(int low_speed)
 162 {
 163         if (low_speed == 0) {
 164                 /* ramping up, set voltage first */
 165                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 166                 /* Make sure we sleep for at least 1ms */
 167                 local_delay(1);
 168         }
 169
 170         /* set frequency */
 171 #ifdef CONFIG_6xx
 172         low_choose_7447a_dfs(low_speed);
 173 #endif
 174         udelay(100);
 175
 176         if (low_speed == 1) {
 177                 /* ramping down, set voltage last */
 178                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 179                 local_delay(1);
 180         }
 181
 182         return 0;
 183 }
 184
 185 static unsigned int dfs_get_cpu_speed(void)
 186 {
 187         if (mfspr(SPRN_HID1) & HID1_DFS)
 188                 return low_freq;
 189         else
 190                 return hi_freq;
 191 }
 192
 193
 194 /* Switch CPU speed using slewing GPIOs
 195  */
 196 static int gpios_set_cpu_speed(int low_speed)
 197 {
 198         int gpio, timeout = 0;
 199
 200         /* If ramping up, set voltage first */
 201         if (low_speed == 0) {
 202                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
 203                 /* Delay is way too big but it's ok, we schedule */
 204                 local_delay(10);
 205         }
 206
 207         /* Set frequency */
 208         gpio =  pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
 209         if (low_speed == ((gpio & 0x01) == 0))
 210                 goto skip;
 211
 212         pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
 213                           low_speed ? 0x04 : 0x05);
 214         udelay(200);
 215         do {
 216                 if (++timeout > 100)
 217                         break;
 218                 local_delay(1);
 219                 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
 220         } while((gpio & 0x02) == 0);
 221  skip:
 222         /* If ramping down, set voltage last */
 223         if (low_speed == 1) {
 224                 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
 225                 /* Delay is way too big but it's ok, we schedule */
 226                 local_delay(10);
 227         }
 228
 229 #ifdef DEBUG_FREQ
 230         debug_calc_bogomips();
 231 #endif
 232
 233         return 0;
 234 }
 235
 236 /* Switch CPU speed under PMU control
 237  */
 238 static int pmu_set_cpu_speed(int low_speed)
 239 {
 240         struct adb_request req;
 241         unsigned long save_l2cr;
 242         unsigned long save_l3cr;
 243         unsigned int pic_prio;
 244         unsigned long flags;
 245
 246         preempt_disable();
 247
 248 #ifdef DEBUG_FREQ
 249         printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
 250 #endif
 251         pmu_suspend();
 252
 253         /* Disable all interrupt sources on openpic */
 254         pic_prio = mpic_cpu_get_priority();
 255         mpic_cpu_set_priority(0xf);
 256
 257         /* Make sure the decrementer won't interrupt us */
 258         asm volatile("mtdec %0" : : "r" (0x7fffffff));
 259         /* Make sure any pending DEC interrupt occurring while we did
 260          * the above didn't re-enable the DEC */
 261         mb();
 262         asm volatile("mtdec %0" : : "r" (0x7fffffff));
 263
 264         /* We can now disable MSR_EE */
 265         local_irq_save(flags);
 266
 267         /* Giveup the FPU & vec */
 268         enable_kernel_fp();
 269
 270 #ifdef CONFIG_ALTIVEC
 271         if (cpu_has_feature(CPU_FTR_ALTIVEC))
 272                 enable_kernel_altivec();
 273 #endif /* CONFIG_ALTIVEC */
 274
 275         /* Save & disable L2 and L3 caches */
 276         save_l3cr = _get_L3CR();        /* (returns -1 if not available) */
 277         save_l2cr = _get_L2CR();        /* (returns -1 if not available) */
 278
 279         /* Send the new speed command. My assumption is that this command
 280          * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
 281          */
 282         pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
 283         while (!req.complete)
 284                 pmu_poll();
 285
 286         /* Prepare the northbridge for the speed transition */
 287         pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
 288
 289         /* Call low level code to backup CPU state and recover from
 290          * hardware reset
 291          */
 292         low_sleep_handler();
 293
 294         /* Restore the northbridge */
 295         pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
 296
 297         /* Restore L2 cache */
 298         if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
 299                 _set_L2CR(save_l2cr);
 300         /* Restore L3 cache */
 301         if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
 302                 _set_L3CR(save_l3cr);
 303
 304         /* Restore userland MMU context */
 305         switch_mmu_context(NULL, current->active_mm);
 306
 307 #ifdef DEBUG_FREQ
 308         printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
 309 #endif
 310
 311         /* Restore low level PMU operations */
 312         pmu_unlock();
 313
 314         /*
 315          * Restore decrementer; we'll take a decrementer interrupt
 316          * as soon as interrupts are re-enabled and the generic
 317          * clockevents code will reprogram it with the right value.
 318          */
 319         set_dec(1);
 320
 321         /* Restore interrupts */
 322         mpic_cpu_set_priority(pic_prio);
 323
 324         /* Let interrupts flow again ... */
 325         local_irq_restore(flags);
 326
 327 #ifdef DEBUG_FREQ
 328         debug_calc_bogomips();
 329 #endif
 330
 331         pmu_resume();
 332
 333         preempt_enable();
 334
 335         return 0;
 336 }
 337
 338 static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
 339                 int notify)
 340 {
 341         struct cpufreq_freqs freqs;
 342         unsigned long l3cr;
 343         static unsigned long prev_l3cr;
 344
 345         freqs.old = cur_freq;
 346         freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 347
 348         if (freqs.old == freqs.new)
 349                 return 0;
 350
 351         if (notify)
 352                 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 353         if (speed_mode == CPUFREQ_LOW &&
 354             cpu_has_feature(CPU_FTR_L3CR)) {
 355                 l3cr = _get_L3CR();
 356                 if (l3cr & L3CR_L3E) {
 357                         prev_l3cr = l3cr;
 358                         _set_L3CR(0);
 359                 }
 360         }
 361         set_speed_proc(speed_mode == CPUFREQ_LOW);
 362         if (speed_mode == CPUFREQ_HIGH &&
 363             cpu_has_feature(CPU_FTR_L3CR)) {
 364                 l3cr = _get_L3CR();
 365                 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
 366                         _set_L3CR(prev_l3cr);
 367         }
 368         if (notify)
 369                 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 370         cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 371
 372         return 0;
 373 }
 374
 375 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
 376 {
 377         return cur_freq;
 378 }
 379
 380 static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
 381 {
 382         return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
 383 }
 384
 385 static int pmac_cpufreq_target( struct cpufreq_policy *policy,
 386                                         unsigned int target_freq,
 387                                         unsigned int relation)
 388 {
 389         unsigned int    newstate = 0;
 390         int             rc;
 391
 392         if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
 393                         target_freq, relation, &newstate))
 394                 return -EINVAL;
 395
 396         rc = do_set_cpu_speed(policy, newstate, 1);
 397
 398         ppc_proc_freq = cur_freq * 1000ul;
 399         return rc;
 400 }
 401
 402 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 403 {
 404         if (policy->cpu != 0)
 405                 return -ENODEV;
 406
 407         policy->cpuinfo.transition_latency      = transition_latency;
 408         policy->cur = cur_freq;
 409
 410         cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
 411         return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
 412 }
 413
 414 static u32 read_gpio(struct device_node *np)
 415 {
 416         const u32 *reg = of_get_property(np, "reg", NULL);
 417         u32 offset;
 418
 419         if (reg == NULL)
 420                 return 0;
 421         /* That works for all keylargos but shall be fixed properly
 422          * some day... The problem is that it seems we can't rely
 423          * on the "reg" property of the GPIO nodes, they are either
 424          * relative to the base of KeyLargo or to the base of the
 425          * GPIO space, and the device-tree doesn't help.
 426          */
 427         offset = *reg;
 428         if (offset < KEYLARGO_GPIO_LEVELS0)
 429                 offset += KEYLARGO_GPIO_LEVELS0;
 430         return offset;
 431 }
 432
 433 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
 434 {
 435         /* Ok, this could be made a bit smarter, but let's be robust for now. We
 436          * always force a speed change to high speed before sleep, to make sure
 437          * we have appropriate voltage and/or bus speed for the wakeup process,
 438          * and to make sure our loops_per_jiffies are "good enough", that is will
 439          * not cause too short delays if we sleep in low speed and wake in high
 440          * speed..
 441          */
 442         no_schedule = 1;
 443         sleep_freq = cur_freq;
 444         if (cur_freq == low_freq && !is_pmu_based)
 445                 do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
 446         return 0;
 447 }
 448
 449 static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 450 {
 451         /* If we resume, first check if we have a get() function */
 452         if (get_speed_proc)
 453                 cur_freq = get_speed_proc();
 454         else
 455                 cur_freq = 0;
 456
 457         /* We don't, hrm... we don't really know our speed here, best
 458          * is that we force a switch to whatever it was, which is
 459          * probably high speed due to our suspend() routine
 460          */
 461         do_set_cpu_speed(policy, sleep_freq == low_freq ?
 462                          CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 463
 464         ppc_proc_freq = cur_freq * 1000ul;
 465
 466         no_schedule = 0;
 467         return 0;
 468 }
 469
 470 static struct cpufreq_driver pmac_cpufreq_driver = {
 471         .verify         = pmac_cpufreq_verify,
 472         .target         = pmac_cpufreq_target,
 473         .get            = pmac_cpufreq_get_speed,
 474         .init           = pmac_cpufreq_cpu_init,
 475         .suspend        = pmac_cpufreq_suspend,
 476         .resume         = pmac_cpufreq_resume,
 477         .flags          = CPUFREQ_PM_NO_WARN,
 478         .attr           = pmac_cpu_freqs_attr,
 479         .name           = "powermac",
 480         .owner          = THIS_MODULE,
 481 };
 482
 483
 484 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 485 {
 486         struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
 487                                                                 "voltage-gpio");
 488         struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
 489                                                                 "frequency-gpio");
 490         struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
 491                                                                      "slewing-done");
 492         const u32 *value;
 493
 494         /*
 495          * Check to see if it's GPIO driven or PMU only
 496          *
 497          * The way we extract the GPIO address is slightly hackish, but it
 498          * works well enough for now. We need to abstract the whole GPIO
 499          * stuff sooner or later anyway
 500          */
 501
 502         if (volt_gpio_np)
 503                 voltage_gpio = read_gpio(volt_gpio_np);
 504         if (freq_gpio_np)
 505                 frequency_gpio = read_gpio(freq_gpio_np);
 506         if (slew_done_gpio_np)
 507                 slew_done_gpio = read_gpio(slew_done_gpio_np);
 508
 509         /* If we use the frequency GPIOs, calculate the min/max speeds based
 510          * on the bus frequencies
 511          */
 512         if (frequency_gpio && slew_done_gpio) {
 513                 int lenp, rc;
 514                 const u32 *freqs, *ratio;
 515
 516                 freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
 517                 lenp /= sizeof(u32);
 518                 if (freqs == NULL || lenp != 2) {
 519                         printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
 520                         return 1;
 521                 }
 522                 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
 523                                                 NULL);
 524                 if (ratio == NULL) {
 525                         printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
 526                         return 1;
 527                 }
 528
 529                 /* Get the min/max bus frequencies */
 530                 low_freq = min(freqs[0], freqs[1]);
 531                 hi_freq = max(freqs[0], freqs[1]);
 532
 533                 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
 534                  * frequency, it claims it to be around 84Mhz on some models while
 535                  * it appears to be approx. 101Mhz on all. Let's hack around here...
 536                  * fortunately, we don't need to be too precise
 537                  */
 538                 if (low_freq < 98000000)
 539                         low_freq = 101000000;
 540
 541                 /* Convert those to CPU core clocks */
 542                 low_freq = (low_freq * (*ratio)) / 2000;
 543                 hi_freq = (hi_freq * (*ratio)) / 2000;
 544
 545                 /* Now we get the frequencies, we read the GPIO to see what is out current
 546                  * speed
 547                  */
 548                 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
 549                 cur_freq = (rc & 0x01) ? hi_freq : low_freq;
 550
 551                 set_speed_proc = gpios_set_cpu_speed;
 552                 return 1;
 553         }
 554
 555         /* If we use the PMU, look for the min & max frequencies in the
 556          * device-tree
 557          */
 558         value = of_get_property(cpunode, "min-clock-frequency", NULL);
 559         if (!value)
 560                 return 1;
 561         low_freq = (*value) / 1000;
 562         /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
 563          * here */
 564         if (low_freq < 100000)
 565                 low_freq *= 10;
 566
 567         value = of_get_property(cpunode, "max-clock-frequency", NULL);
 568         if (!value)
 569                 return 1;
 570         hi_freq = (*value) / 1000;
 571         set_speed_proc = pmu_set_cpu_speed;
 572         is_pmu_based = 1;
 573
 574         return 0;
 575 }
 576
 577 static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 578 {
 579         struct device_node *volt_gpio_np;
 580
 581         if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 582                 return 1;
 583
 584         volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
 585         if (volt_gpio_np)
 586                 voltage_gpio = read_gpio(volt_gpio_np);
 587         if (!voltage_gpio){
 588                 printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
 589                 return 1;
 590         }
 591
 592         /* OF only reports the high frequency */
 593         hi_freq = cur_freq;
 594         low_freq = cur_freq/2;
 595
 596         /* Read actual frequency from CPU */
 597         cur_freq = dfs_get_cpu_speed();
 598         set_speed_proc = dfs_set_cpu_speed;
 599         get_speed_proc = dfs_get_cpu_speed;
 600
 601         return 0;
 602 }
 603
 604 static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 605 {
 606         struct device_node *volt_gpio_np;
 607         u32 pvr;
 608         const u32 *value;
 609
 610         if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 611                 return 1;
 612
 613         hi_freq = cur_freq;
 614         value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
 615         if (!value)
 616                 return 1;
 617         low_freq = (*value) / 1000;
 618
 619         volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
 620         if (volt_gpio_np)
 621                 voltage_gpio = read_gpio(volt_gpio_np);
 622
 623         pvr = mfspr(SPRN_PVR);
 624         has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
 625
 626         set_speed_proc = cpu_750fx_cpu_speed;
 627         get_speed_proc = cpu_750fx_get_cpu_speed;
 628         cur_freq = cpu_750fx_get_cpu_speed();
 629
 630         return 0;
 631 }
 632
 633 /* Currently, we support the following machines:
 634  *
 635  *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
 636  *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
 637  *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
 638  *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
 639  *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
 640  *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
 641  *  - Recent MacRISC3 laptops
 642  *  - All new machines with 7447A CPUs
 643  */
 644 static int __init pmac_cpufreq_setup(void)
 645 {
 646         struct device_node      *cpunode;
 647         const u32               *value;
 648
 649         if (strstr(cmd_line, "nocpufreq"))
 650                 return 0;
 651
 652         /* Assume only one CPU */
 653         cpunode = of_find_node_by_type(NULL, "cpu");
 654         if (!cpunode)
 655                 goto out;
 656
 657         /* Get current cpu clock freq */
 658         value = of_get_property(cpunode, "clock-frequency", NULL);
 659         if (!value)
 660                 goto out;
 661         cur_freq = (*value) / 1000;
 662         transition_latency = CPUFREQ_ETERNAL;
 663
 664         /*  Check for 7447A based MacRISC3 */
 665         if (of_machine_is_compatible("MacRISC3") &&
 666             of_get_property(cpunode, "dynamic-power-step", NULL) &&
 667             PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 668                 pmac_cpufreq_init_7447A(cpunode);
 669                 transition_latency = 8000000;
 670         /* Check for other MacRISC3 machines */
 671         } else if (of_machine_is_compatible("PowerBook3,4") ||
 672                    of_machine_is_compatible("PowerBook3,5") ||
 673                    of_machine_is_compatible("MacRISC3")) {
 674                 pmac_cpufreq_init_MacRISC3(cpunode);
 675         /* Else check for iBook2 500/600 */
 676         } else if (of_machine_is_compatible("PowerBook4,1")) {
 677                 hi_freq = cur_freq;
 678                 low_freq = 400000;
 679                 set_speed_proc = pmu_set_cpu_speed;
 680                 is_pmu_based = 1;
 681         }
 682         /* Else check for TiPb 550 */
 683         else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
 684                 hi_freq = cur_freq;
 685                 low_freq = 500000;
 686                 set_speed_proc = pmu_set_cpu_speed;
 687                 is_pmu_based = 1;
 688         }
 689         /* Else check for TiPb 400 & 500 */
 690         else if (of_machine_is_compatible("PowerBook3,2")) {
 691                 /* We only know about the 400 MHz and the 500Mhz model
 692                  * they both have 300 MHz as low frequency
 693                  */
 694                 if (cur_freq < 350000 || cur_freq > 550000)
 695                         goto out;
 696                 hi_freq = cur_freq;
 697                 low_freq = 300000;
 698                 set_speed_proc = pmu_set_cpu_speed;
 699                 is_pmu_based = 1;
 700         }
 701         /* Else check for 750FX */
 702         else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
 703                 pmac_cpufreq_init_750FX(cpunode);
 704 out:
 705         of_node_put(cpunode);
 706         if (set_speed_proc == NULL)
 707                 return -ENODEV;
 708
 709         pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
 710         pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
 711         ppc_proc_freq = cur_freq * 1000ul;
 712
 713         printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
 714         printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
 715                low_freq/1000, hi_freq/1000, cur_freq/1000);
 716
 717         return cpufreq_register_driver(&pmac_cpufreq_driver);
 718 }
 719
 720 module_init(pmac_cpufreq_setup);
 721