drivers/cpufreq/s3c24xx-cpufreq.c

   1 /*
   2  * Copyright (c) 2006-2008 Simtec Electronics
   3  *      http://armlinux.simtec.co.uk/
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C24XX CPU Frequency scaling
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/init.h>
  14 #include <linux/module.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/ioport.h>
  17 #include <linux/cpufreq.h>
  18 #include <linux/cpu.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21 #include <linux/io.h>
  22 #include <linux/device.h>
  23 #include <linux/sysfs.h>
  24 #include <linux/slab.h>
  25
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/map.h>
  28
  29 #include <plat/cpu.h>
  30 #include <plat/clock.h>
  31 #include <plat/cpu-freq-core.h>
  32
  33 #include <mach/regs-clock.h>
  34
  35 /* note, cpufreq support deals in kHz, no Hz */
  36
  37 static struct cpufreq_driver s3c24xx_driver;
  38 static struct s3c_cpufreq_config cpu_cur;
  39 static struct s3c_iotimings s3c24xx_iotiming;
  40 static struct cpufreq_frequency_table *pll_reg;
  41 static unsigned int last_target = ~0;
  42 static unsigned int ftab_size;
  43 static struct cpufreq_frequency_table *ftab;
  44
  45 static struct clk *_clk_mpll;
  46 static struct clk *_clk_xtal;
  47 static struct clk *clk_fclk;
  48 static struct clk *clk_hclk;
  49 static struct clk *clk_pclk;
  50 static struct clk *clk_arm;
  51
  52 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
  53 struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
  54 {
  55         return &cpu_cur;
  56 }
  57
  58 struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
  59 {
  60         return &s3c24xx_iotiming;
  61 }
  62 #endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */
  63
  64 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
  65 {
  66         unsigned long fclk, pclk, hclk, armclk;
  67
  68         cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
  69         cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
  70         cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
  71         cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
  72
  73         cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
  74         cfg->pll.frequency = fclk;
  75
  76         cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
  77
  78         cfg->divs.h_divisor = fclk / hclk;
  79         cfg->divs.p_divisor = fclk / pclk;
  80 }
  81
  82 static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
  83 {
  84         unsigned long pll = cfg->pll.frequency;
  85
  86         cfg->freq.fclk = pll;
  87         cfg->freq.hclk = pll / cfg->divs.h_divisor;
  88         cfg->freq.pclk = pll / cfg->divs.p_divisor;
  89
  90         /* convert hclk into 10ths of nanoseconds for io calcs */
  91         cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
  92 }
  93
  94 static inline int closer(unsigned int target, unsigned int n, unsigned int c)
  95 {
  96         int diff_cur = abs(target - c);
  97         int diff_new = abs(target - n);
  98
  99         return (diff_new < diff_cur);
 100 }
 101
 102 static void s3c_cpufreq_show(const char *pfx,
 103                                  struct s3c_cpufreq_config *cfg)
 104 {
 105         s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
 106                      pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
 107                      cfg->freq.hclk, cfg->divs.h_divisor,
 108                      cfg->freq.pclk, cfg->divs.p_divisor);
 109 }
 110
 111 /* functions to wrapper the driver info calls to do the cpu specific work */
 112
 113 static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
 114 {
 115         if (cfg->info->set_iotiming)
 116                 (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
 117 }
 118
 119 static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
 120 {
 121         if (cfg->info->calc_iotiming)
 122                 return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
 123
 124         return 0;
 125 }
 126
 127 static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
 128 {
 129         (cfg->info->set_refresh)(cfg);
 130 }
 131
 132 static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
 133 {
 134         (cfg->info->set_divs)(cfg);
 135 }
 136
 137 static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 138 {
 139         return (cfg->info->calc_divs)(cfg);
 140 }
 141
 142 static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
 143 {
 144         cfg->mpll = _clk_mpll;
 145         (cfg->info->set_fvco)(cfg);
 146 }
 147
 148 static inline void s3c_cpufreq_resume_clocks(void)
 149 {
 150         cpu_cur.info->resume_clocks();
 151 }
 152
 153 static inline void s3c_cpufreq_updateclk(struct clk *clk,
 154                                          unsigned int freq)
 155 {
 156         clk_set_rate(clk, freq);
 157 }
 158
 159 static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 160                                  unsigned int target_freq,
 161                                  struct cpufreq_frequency_table *pll)
 162 {
 163         struct s3c_cpufreq_freqs freqs;
 164         struct s3c_cpufreq_config cpu_new;
 165         unsigned long flags;
 166
 167         cpu_new = cpu_cur;  /* copy new from current */
 168
 169         s3c_cpufreq_show("cur", &cpu_cur);
 170
 171         /* TODO - check for DMA currently outstanding */
 172
 173         cpu_new.pll = pll ? *pll : cpu_cur.pll;
 174
 175         if (pll)
 176                 freqs.pll_changing = 1;
 177
 178         /* update our frequencies */
 179
 180         cpu_new.freq.armclk = target_freq;
 181         cpu_new.freq.fclk = cpu_new.pll.frequency;
 182
 183         if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
 184                 printk(KERN_ERR "no divisors for %d\n", target_freq);
 185                 goto err_notpossible;
 186         }
 187
 188         s3c_freq_dbg("%s: got divs\n", __func__);
 189
 190         s3c_cpufreq_calc(&cpu_new);
 191
 192         s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
 193
 194         if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
 195                 if (s3c_cpufreq_calcio(&cpu_new) < 0) {
 196                         printk(KERN_ERR "%s: no IO timings\n", __func__);
 197                         goto err_notpossible;
 198                 }
 199         }
 200
 201         s3c_cpufreq_show("new", &cpu_new);
 202
 203         /* setup our cpufreq parameters */
 204
 205         freqs.old = cpu_cur.freq;
 206         freqs.new = cpu_new.freq;
 207
 208         freqs.freqs.old = cpu_cur.freq.armclk / 1000;
 209         freqs.freqs.new = cpu_new.freq.armclk / 1000;
 210
 211         /* update f/h/p clock settings before we issue the change
 212          * notification, so that drivers do not need to do anything
 213          * special if they want to recalculate on CPUFREQ_PRECHANGE. */
 214
 215         s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
 216         s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
 217         s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
 218         s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
 219
 220         /* start the frequency change */
 221         cpufreq_freq_transition_begin(policy, &freqs.freqs);
 222
 223         /* If hclk is staying the same, then we do not need to
 224          * re-write the IO or the refresh timings whilst we are changing
 225          * speed. */
 226
 227         local_irq_save(flags);
 228
 229         /* is our memory clock slowing down? */
 230         if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
 231                 s3c_cpufreq_setrefresh(&cpu_new);
 232                 s3c_cpufreq_setio(&cpu_new);
 233         }
 234
 235         if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
 236                 /* not changing PLL, just set the divisors */
 237
 238                 s3c_cpufreq_setdivs(&cpu_new);
 239         } else {
 240                 if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
 241                         /* slow the cpu down, then set divisors */
 242
 243                         s3c_cpufreq_setfvco(&cpu_new);
 244                         s3c_cpufreq_setdivs(&cpu_new);
 245                 } else {
 246                         /* set the divisors, then speed up */
 247
 248                         s3c_cpufreq_setdivs(&cpu_new);
 249                         s3c_cpufreq_setfvco(&cpu_new);
 250                 }
 251         }
 252
 253         /* did our memory clock speed up */
 254         if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
 255                 s3c_cpufreq_setrefresh(&cpu_new);
 256                 s3c_cpufreq_setio(&cpu_new);
 257         }
 258
 259         /* update our current settings */
 260         cpu_cur = cpu_new;
 261
 262         local_irq_restore(flags);
 263
 264         /* notify everyone we've done this */
 265         cpufreq_freq_transition_end(policy, &freqs.freqs, 0);
 266
 267         s3c_freq_dbg("%s: finished\n", __func__);
 268         return 0;
 269
 270  err_notpossible:
 271         printk(KERN_ERR "no compatible settings for %d\n", target_freq);
 272         return -EINVAL;
 273 }
 274
 275 /* s3c_cpufreq_target
 276  *
 277  * called by the cpufreq core to adjust the frequency that the CPU
 278  * is currently running at.
 279  */
 280
 281 static int s3c_cpufreq_target(struct cpufreq_policy *policy,
 282                               unsigned int target_freq,
 283                               unsigned int relation)
 284 {
 285         struct cpufreq_frequency_table *pll;
 286         unsigned int index;
 287
 288         /* avoid repeated calls which cause a needless amout of duplicated
 289          * logging output (and CPU time as the calculation process is
 290          * done) */
 291         if (target_freq == last_target)
 292                 return 0;
 293
 294         last_target = target_freq;
 295
 296         s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
 297                      __func__, policy, target_freq, relation);
 298
 299         if (ftab) {
 300                 if (cpufreq_frequency_table_target(policy, ftab,
 301                                                    target_freq, relation,
 302                                                    &index)) {
 303                         s3c_freq_dbg("%s: table failed\n", __func__);
 304                         return -EINVAL;
 305                 }
 306
 307                 s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
 308                              target_freq, index, ftab[index].frequency);
 309                 target_freq = ftab[index].frequency;
 310         }
 311
 312         target_freq *= 1000;  /* convert target to Hz */
 313
 314         /* find the settings for our new frequency */
 315
 316         if (!pll_reg || cpu_cur.lock_pll) {
 317                 /* either we've not got any PLL values, or we've locked
 318                  * to the current one. */
 319                 pll = NULL;
 320         } else {
 321                 struct cpufreq_policy tmp_policy;
 322                 int ret;
 323
 324                 /* we keep the cpu pll table in Hz, to ensure we get an
 325                  * accurate value for the PLL output. */
 326
 327                 tmp_policy.min = policy->min * 1000;
 328                 tmp_policy.max = policy->max * 1000;
 329                 tmp_policy.cpu = policy->cpu;
 330
 331                 /* cpufreq_frequency_table_target uses a pointer to 'index'
 332                  * which is the number of the table entry, not the value of
 333                  * the table entry's index field. */
 334
 335                 ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
 336                                                      target_freq, relation,
 337                                                      &index);
 338
 339                 if (ret < 0) {
 340                         printk(KERN_ERR "%s: no PLL available\n", __func__);
 341                         goto err_notpossible;
 342                 }
 343
 344                 pll = pll_reg + index;
 345
 346                 s3c_freq_dbg("%s: target %u => %u\n",
 347                              __func__, target_freq, pll->frequency);
 348
 349                 target_freq = pll->frequency;
 350         }
 351
 352         return s3c_cpufreq_settarget(policy, target_freq, pll);
 353
 354  err_notpossible:
 355         printk(KERN_ERR "no compatible settings for %d\n", target_freq);
 356         return -EINVAL;
 357 }
 358
 359 struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
 360 {
 361         struct clk *clk;
 362
 363         clk = clk_get(dev, name);
 364         if (IS_ERR(clk))
 365                 printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
 366
 367         return clk;
 368 }
 369
 370 static int s3c_cpufreq_init(struct cpufreq_policy *policy)
 371 {
 372         policy->clk = clk_arm;
 373         return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency);
 374 }
 375
 376 static int __init s3c_cpufreq_initclks(void)
 377 {
 378         _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
 379         _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
 380         clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
 381         clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
 382         clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
 383         clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
 384
 385         if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
 386             IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
 387                 printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
 388                 return -ENOENT;
 389         }
 390
 391         printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
 392                clk_get_rate(clk_fclk) / 1000,
 393                clk_get_rate(clk_hclk) / 1000,
 394                clk_get_rate(clk_pclk) / 1000,
 395                clk_get_rate(clk_arm) / 1000);
 396
 397         return 0;
 398 }
 399
 400 #ifdef CONFIG_PM
 401 static struct cpufreq_frequency_table suspend_pll;
 402 static unsigned int suspend_freq;
 403
 404 static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
 405 {
 406         suspend_pll.frequency = clk_get_rate(_clk_mpll);
 407         suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
 408         suspend_freq = clk_get_rate(clk_arm);
 409
 410         return 0;
 411 }
 412
 413 static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 414 {
 415         int ret;
 416
 417         s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
 418
 419         last_target = ~0;       /* invalidate last_target setting */
 420
 421         /* first, find out what speed we resumed at. */
 422         s3c_cpufreq_resume_clocks();
 423
 424         /* whilst we will be called later on, we try and re-set the
 425          * cpu frequencies as soon as possible so that we do not end
 426          * up resuming devices and then immediately having to re-set
 427          * a number of settings once these devices have restarted.
 428          *
 429          * as a note, it is expected devices are not used until they
 430          * have been un-suspended and at that time they should have
 431          * used the updated clock settings.
 432          */
 433
 434         ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
 435         if (ret) {
 436                 printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
 437                 return ret;
 438         }
 439
 440         return 0;
 441 }
 442 #else
 443 #define s3c_cpufreq_resume NULL
 444 #define s3c_cpufreq_suspend NULL
 445 #endif
 446
 447 static struct cpufreq_driver s3c24xx_driver = {
 448         .flags          = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 449         .target         = s3c_cpufreq_target,
 450         .get            = cpufreq_generic_get,
 451         .init           = s3c_cpufreq_init,
 452         .suspend        = s3c_cpufreq_suspend,
 453         .resume         = s3c_cpufreq_resume,
 454         .name           = "s3c24xx",
 455 };
 456
 457
 458 int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
 459 {
 460         if (!info || !info->name) {
 461                 printk(KERN_ERR "%s: failed to pass valid information\n",
 462                        __func__);
 463                 return -EINVAL;
 464         }
 465
 466         printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
 467                info->name);
 468
 469         /* check our driver info has valid data */
 470
 471         BUG_ON(info->set_refresh == NULL);
 472         BUG_ON(info->set_divs == NULL);
 473         BUG_ON(info->calc_divs == NULL);
 474
 475         /* info->set_fvco is optional, depending on whether there
 476          * is a need to set the clock code. */
 477
 478         cpu_cur.info = info;
 479
 480         /* Note, driver registering should probably update locktime */
 481
 482         return 0;
 483 }
 484
 485 int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 486 {
 487         struct s3c_cpufreq_board *ours;
 488
 489         if (!board) {
 490                 printk(KERN_INFO "%s: no board data\n", __func__);
 491                 return -EINVAL;
 492         }
 493
 494         /* Copy the board information so that each board can make this
 495          * initdata. */
 496
 497         ours = kzalloc(sizeof(*ours), GFP_KERNEL);
 498         if (ours == NULL) {
 499                 printk(KERN_ERR "%s: no memory\n", __func__);
 500                 return -ENOMEM;
 501         }
 502
 503         *ours = *board;
 504         cpu_cur.board = ours;
 505
 506         return 0;
 507 }
 508
 509 static int __init s3c_cpufreq_auto_io(void)
 510 {
 511         int ret;
 512
 513         if (!cpu_cur.info->get_iotiming) {
 514                 printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
 515                 return -ENOENT;
 516         }
 517
 518         printk(KERN_INFO "%s: working out IO settings\n", __func__);
 519
 520         ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
 521         if (ret)
 522                 printk(KERN_ERR "%s: failed to get timings\n", __func__);
 523
 524         return ret;
 525 }
 526
 527 /* if one or is zero, then return the other, otherwise return the min */
 528 #define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
 529
 530 /**
 531  * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
 532  * @dst: The destination structure
 533  * @a: One argument.
 534  * @b: The other argument.
 535  *
 536  * Create a minimum of each frequency entry in the 'struct s3c_freq',
 537  * unless the entry is zero when it is ignored and the non-zero argument
 538  * used.
 539  */
 540 static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
 541                                  struct s3c_freq *a, struct s3c_freq *b)
 542 {
 543         dst->fclk = do_min(a->fclk, b->fclk);
 544         dst->hclk = do_min(a->hclk, b->hclk);
 545         dst->pclk = do_min(a->pclk, b->pclk);
 546         dst->armclk = do_min(a->armclk, b->armclk);
 547 }
 548
 549 static inline u32 calc_locktime(u32 freq, u32 time_us)
 550 {
 551         u32 result;
 552
 553         result = freq * time_us;
 554         result = DIV_ROUND_UP(result, 1000 * 1000);
 555
 556         return result;
 557 }
 558
 559 static void s3c_cpufreq_update_loctkime(void)
 560 {
 561         unsigned int bits = cpu_cur.info->locktime_bits;
 562         u32 rate = (u32)clk_get_rate(_clk_xtal);
 563         u32 val;
 564
 565         if (bits == 0) {
 566                 WARN_ON(1);
 567                 return;
 568         }
 569
 570         val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
 571         val |= calc_locktime(rate, cpu_cur.info->locktime_m);
 572
 573         printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
 574         __raw_writel(val, S3C2410_LOCKTIME);
 575 }
 576
 577 static int s3c_cpufreq_build_freq(void)
 578 {
 579         int size, ret;
 580
 581         if (!cpu_cur.info->calc_freqtable)
 582                 return -EINVAL;
 583
 584         kfree(ftab);
 585         ftab = NULL;
 586
 587         size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
 588         size++;
 589
 590         ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
 591         if (!ftab) {
 592                 printk(KERN_ERR "%s: no memory for tables\n", __func__);
 593                 return -ENOMEM;
 594         }
 595
 596         ftab_size = size;
 597
 598         ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
 599         s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
 600
 601         return 0;
 602 }
 603
 604 static int __init s3c_cpufreq_initcall(void)
 605 {
 606         int ret = 0;
 607
 608         if (cpu_cur.info && cpu_cur.board) {
 609                 ret = s3c_cpufreq_initclks();
 610                 if (ret)
 611                         goto out;
 612
 613                 /* get current settings */
 614                 s3c_cpufreq_getcur(&cpu_cur);
 615                 s3c_cpufreq_show("cur", &cpu_cur);
 616
 617                 if (cpu_cur.board->auto_io) {
 618                         ret = s3c_cpufreq_auto_io();
 619                         if (ret) {
 620                                 printk(KERN_ERR "%s: failed to get io timing\n",
 621                                        __func__);
 622                                 goto out;
 623                         }
 624                 }
 625
 626                 if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
 627                         printk(KERN_ERR "%s: no IO support registered\n",
 628                                __func__);
 629                         ret = -EINVAL;
 630                         goto out;
 631                 }
 632
 633                 if (!cpu_cur.info->need_pll)
 634                         cpu_cur.lock_pll = 1;
 635
 636                 s3c_cpufreq_update_loctkime();
 637
 638                 s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
 639                                      &cpu_cur.info->max);
 640
 641                 if (cpu_cur.info->calc_freqtable)
 642                         s3c_cpufreq_build_freq();
 643
 644                 ret = cpufreq_register_driver(&s3c24xx_driver);
 645         }
 646
 647  out:
 648         return ret;
 649 }
 650
 651 late_initcall(s3c_cpufreq_initcall);
 652
 653 /**
 654  * s3c_plltab_register - register CPU PLL table.
 655  * @plls: The list of PLL entries.
 656  * @plls_no: The size of the PLL entries @plls.
 657  *
 658  * Register the given set of PLLs with the system.
 659  */
 660 int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
 661                                unsigned int plls_no)
 662 {
 663         struct cpufreq_frequency_table *vals;
 664         unsigned int size;
 665
 666         size = sizeof(*vals) * (plls_no + 1);
 667
 668         vals = kzalloc(size, GFP_KERNEL);
 669         if (vals) {
 670                 memcpy(vals, plls, size);
 671                 pll_reg = vals;
 672
 673                 /* write a terminating entry, we don't store it in the
 674                  * table that is stored in the kernel */
 675                 vals += plls_no;
 676                 vals->frequency = CPUFREQ_TABLE_END;
 677
 678                 printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
 679         } else
 680                 printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
 681
 682         return vals ? 0 : -ENOMEM;
 683 }