drivers/cpufreq/s3c64xx-cpufreq.c

   1 /*
   2  * Copyright 2009 Wolfson Microelectronics plc
   3  *
   4  * S3C64xx CPUfreq Support
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #define pr_fmt(fmt) "cpufreq: " fmt
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/init.h>
  16 #include <linux/cpufreq.h>
  17 #include <linux/clk.h>
  18 #include <linux/err.h>
  19 #include <linux/regulator/consumer.h>
  20 #include <linux/module.h>
  21
  22 static struct clk *armclk;
  23 static struct regulator *vddarm;
  24 static unsigned long regulator_latency;
  25
  26 #ifdef CONFIG_CPU_S3C6410
  27 struct s3c64xx_dvfs {
  28         unsigned int vddarm_min;
  29         unsigned int vddarm_max;
  30 };
  31
  32 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
  33         [0] = { 1000000, 1150000 },
  34         [1] = { 1050000, 1150000 },
  35         [2] = { 1100000, 1150000 },
  36         [3] = { 1200000, 1350000 },
  37         [4] = { 1300000, 1350000 },
  38 };
  39
  40 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
  41         { 0,  66000 },
  42         { 0, 100000 },
  43         { 0, 133000 },
  44         { 1, 200000 },
  45         { 1, 222000 },
  46         { 1, 266000 },
  47         { 2, 333000 },
  48         { 2, 400000 },
  49         { 2, 532000 },
  50         { 2, 533000 },
  51         { 3, 667000 },
  52         { 4, 800000 },
  53         { 0, CPUFREQ_TABLE_END },
  54 };
  55 #endif
  56
  57 static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
  58 {
  59         if (policy->cpu != 0)
  60                 return -EINVAL;
  61
  62         return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
  63 }
  64
  65 static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
  66 {
  67         if (cpu != 0)
  68                 return 0;
  69
  70         return clk_get_rate(armclk) / 1000;
  71 }
  72
  73 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
  74                                       unsigned int target_freq,
  75                                       unsigned int relation)
  76 {
  77         int ret;
  78         unsigned int i;
  79         struct cpufreq_freqs freqs;
  80         struct s3c64xx_dvfs *dvfs;
  81
  82         ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
  83                                              target_freq, relation, &i);
  84         if (ret != 0)
  85                 return ret;
  86
  87         freqs.old = clk_get_rate(armclk) / 1000;
  88         freqs.new = s3c64xx_freq_table[i].frequency;
  89         freqs.flags = 0;
  90         dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data];
  91
  92         if (freqs.old == freqs.new)
  93                 return 0;
  94
  95         pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new);
  96
  97         cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
  98
  99 #ifdef CONFIG_REGULATOR
 100         if (vddarm && freqs.new > freqs.old) {
 101                 ret = regulator_set_voltage(vddarm,
 102                                             dvfs->vddarm_min,
 103                                             dvfs->vddarm_max);
 104                 if (ret != 0) {
 105                         pr_err("Failed to set VDDARM for %dkHz: %d\n",
 106                                freqs.new, ret);
 107                         freqs.new = freqs.old;
 108                         goto post_notify;
 109                 }
 110         }
 111 #endif
 112
 113         ret = clk_set_rate(armclk, freqs.new * 1000);
 114         if (ret < 0) {
 115                 pr_err("Failed to set rate %dkHz: %d\n",
 116                        freqs.new, ret);
 117                 freqs.new = freqs.old;
 118         }
 119
 120 post_notify:
 121         cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 122         if (ret)
 123                 goto err;
 124
 125 #ifdef CONFIG_REGULATOR
 126         if (vddarm && freqs.new < freqs.old) {
 127                 ret = regulator_set_voltage(vddarm,
 128                                             dvfs->vddarm_min,
 129                                             dvfs->vddarm_max);
 130                 if (ret != 0) {
 131                         pr_err("Failed to set VDDARM for %dkHz: %d\n",
 132                                freqs.new, ret);
 133                         goto err_clk;
 134                 }
 135         }
 136 #endif
 137
 138         pr_debug("Set actual frequency %lukHz\n",
 139                  clk_get_rate(armclk) / 1000);
 140
 141         return 0;
 142
 143 err_clk:
 144         if (clk_set_rate(armclk, freqs.old * 1000) < 0)
 145                 pr_err("Failed to restore original clock rate\n");
 146 err:
 147         cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 148
 149         return ret;
 150 }
 151
 152 #ifdef CONFIG_REGULATOR
 153 static void __init s3c64xx_cpufreq_config_regulator(void)
 154 {
 155         int count, v, i, found;
 156         struct cpufreq_frequency_table *freq;
 157         struct s3c64xx_dvfs *dvfs;
 158
 159         count = regulator_count_voltages(vddarm);
 160         if (count < 0) {
 161                 pr_err("Unable to check supported voltages\n");
 162         }
 163
 164         freq = s3c64xx_freq_table;
 165         while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 166                 if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 167                         continue;
 168
 169                 dvfs = &s3c64xx_dvfs_table[freq->driver_data];
 170                 found = 0;
 171
 172                 for (i = 0; i < count; i++) {
 173                         v = regulator_list_voltage(vddarm, i);
 174                         if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
 175                                 found = 1;
 176                 }
 177
 178                 if (!found) {
 179                         pr_debug("%dkHz unsupported by regulator\n",
 180                                  freq->frequency);
 181                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 182                 }
 183
 184                 freq++;
 185         }
 186
 187         /* Guess based on having to do an I2C/SPI write; in future we
 188          * will be able to query the regulator performance here. */
 189         regulator_latency = 1 * 1000 * 1000;
 190 }
 191 #endif
 192
 193 static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 194 {
 195         int ret;
 196         struct cpufreq_frequency_table *freq;
 197
 198         if (policy->cpu != 0)
 199                 return -EINVAL;
 200
 201         if (s3c64xx_freq_table == NULL) {
 202                 pr_err("No frequency information for this CPU\n");
 203                 return -ENODEV;
 204         }
 205
 206         armclk = clk_get(NULL, "armclk");
 207         if (IS_ERR(armclk)) {
 208                 pr_err("Unable to obtain ARMCLK: %ld\n",
 209                        PTR_ERR(armclk));
 210                 return PTR_ERR(armclk);
 211         }
 212
 213 #ifdef CONFIG_REGULATOR
 214         vddarm = regulator_get(NULL, "vddarm");
 215         if (IS_ERR(vddarm)) {
 216                 ret = PTR_ERR(vddarm);
 217                 pr_err("Failed to obtain VDDARM: %d\n", ret);
 218                 pr_err("Only frequency scaling available\n");
 219                 vddarm = NULL;
 220         } else {
 221                 s3c64xx_cpufreq_config_regulator();
 222         }
 223 #endif
 224
 225         freq = s3c64xx_freq_table;
 226         while (freq->frequency != CPUFREQ_TABLE_END) {
 227                 unsigned long r;
 228
 229                 /* Check for frequencies we can generate */
 230                 r = clk_round_rate(armclk, freq->frequency * 1000);
 231                 r /= 1000;
 232                 if (r != freq->frequency) {
 233                         pr_debug("%dkHz unsupported by clock\n",
 234                                  freq->frequency);
 235                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 236                 }
 237
 238                 /* If we have no regulator then assume startup
 239                  * frequency is the maximum we can support. */
 240                 if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
 241                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 242
 243                 freq++;
 244         }
 245
 246         policy->cur = clk_get_rate(armclk) / 1000;
 247
 248         /* Datasheet says PLL stabalisation time (if we were to use
 249          * the PLLs, which we don't currently) is ~300us worst case,
 250          * but add some fudge.
 251          */
 252         policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 253
 254         ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 255         if (ret != 0) {
 256                 pr_err("Failed to configure frequency table: %d\n",
 257                        ret);
 258                 regulator_put(vddarm);
 259                 clk_put(armclk);
 260         }
 261
 262         return ret;
 263 }
 264
 265 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
 266         .flags          = 0,
 267         .verify         = s3c64xx_cpufreq_verify_speed,
 268         .target         = s3c64xx_cpufreq_set_target,
 269         .get            = s3c64xx_cpufreq_get_speed,
 270         .init           = s3c64xx_cpufreq_driver_init,
 271         .name           = "s3c",
 272 };
 273
 274 static int __init s3c64xx_cpufreq_init(void)
 275 {
 276         return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
 277 }
 278 module_init(s3c64xx_cpufreq_init);