drivers/cpufreq/s3c64xx-cpufreq.c

   1 /*
   2  * Copyright 2009 Wolfson Microelectronics plc
   3  *
   4  * S3C64xx CPUfreq Support
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #define pr_fmt(fmt) "cpufreq: " fmt
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/init.h>
  16 #include <linux/cpufreq.h>
  17 #include <linux/clk.h>
  18 #include <linux/err.h>
  19 #include <linux/regulator/consumer.h>
  20 #include <linux/module.h>
  21
  22 static struct clk *armclk;
  23 static struct regulator *vddarm;
  24 static unsigned long regulator_latency;
  25
  26 #ifdef CONFIG_CPU_S3C6410
  27 struct s3c64xx_dvfs {
  28         unsigned int vddarm_min;
  29         unsigned int vddarm_max;
  30 };
  31
  32 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
  33         [0] = { 1000000, 1150000 },
  34         [1] = { 1050000, 1150000 },
  35         [2] = { 1100000, 1150000 },
  36         [3] = { 1200000, 1350000 },
  37         [4] = { 1300000, 1350000 },
  38 };
  39
  40 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
  41         { 0,  66000 },
  42         { 0, 100000 },
  43         { 0, 133000 },
  44         { 1, 200000 },
  45         { 1, 222000 },
  46         { 1, 266000 },
  47         { 2, 333000 },
  48         { 2, 400000 },
  49         { 2, 532000 },
  50         { 2, 533000 },
  51         { 3, 667000 },
  52         { 4, 800000 },
  53         { 0, CPUFREQ_TABLE_END },
  54 };
  55 #endif
  56
  57 static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
  58 {
  59         if (cpu != 0)
  60                 return 0;
  61
  62         return clk_get_rate(armclk) / 1000;
  63 }
  64
  65 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
  66                                       unsigned int index)
  67 {
  68         struct s3c64xx_dvfs *dvfs;
  69         unsigned int old_freq, new_freq;
  70         int ret;
  71
  72         old_freq = clk_get_rate(armclk) / 1000;
  73         new_freq = s3c64xx_freq_table[index].frequency;
  74         dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data];
  75
  76 #ifdef CONFIG_REGULATOR
  77         if (vddarm && new_freq > old_freq) {
  78                 ret = regulator_set_voltage(vddarm,
  79                                             dvfs->vddarm_min,
  80                                             dvfs->vddarm_max);
  81                 if (ret != 0) {
  82                         pr_err("Failed to set VDDARM for %dkHz: %d\n",
  83                                new_freq, ret);
  84                         return ret;
  85                 }
  86         }
  87 #endif
  88
  89         ret = clk_set_rate(armclk, new_freq * 1000);
  90         if (ret < 0) {
  91                 pr_err("Failed to set rate %dkHz: %d\n",
  92                        new_freq, ret);
  93                 return ret;
  94         }
  95
  96 #ifdef CONFIG_REGULATOR
  97         if (vddarm && new_freq < old_freq) {
  98                 ret = regulator_set_voltage(vddarm,
  99                                             dvfs->vddarm_min,
 100                                             dvfs->vddarm_max);
 101                 if (ret != 0) {
 102                         pr_err("Failed to set VDDARM for %dkHz: %d\n",
 103                                new_freq, ret);
 104                         if (clk_set_rate(armclk, old_freq * 1000) < 0)
 105                                 pr_err("Failed to restore original clock rate\n");
 106
 107                         return ret;
 108                 }
 109         }
 110 #endif
 111
 112         pr_debug("Set actual frequency %lukHz\n",
 113                  clk_get_rate(armclk) / 1000);
 114
 115         return 0;
 116 }
 117
 118 #ifdef CONFIG_REGULATOR
 119 static void __init s3c64xx_cpufreq_config_regulator(void)
 120 {
 121         int count, v, i, found;
 122         struct cpufreq_frequency_table *freq;
 123         struct s3c64xx_dvfs *dvfs;
 124
 125         count = regulator_count_voltages(vddarm);
 126         if (count < 0) {
 127                 pr_err("Unable to check supported voltages\n");
 128         }
 129
 130         freq = s3c64xx_freq_table;
 131         while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 132                 if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 133                         continue;
 134
 135                 dvfs = &s3c64xx_dvfs_table[freq->driver_data];
 136                 found = 0;
 137
 138                 for (i = 0; i < count; i++) {
 139                         v = regulator_list_voltage(vddarm, i);
 140                         if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
 141                                 found = 1;
 142                 }
 143
 144                 if (!found) {
 145                         pr_debug("%dkHz unsupported by regulator\n",
 146                                  freq->frequency);
 147                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 148                 }
 149
 150                 freq++;
 151         }
 152
 153         /* Guess based on having to do an I2C/SPI write; in future we
 154          * will be able to query the regulator performance here. */
 155         regulator_latency = 1 * 1000 * 1000;
 156 }
 157 #endif
 158
 159 static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 160 {
 161         int ret;
 162         struct cpufreq_frequency_table *freq;
 163
 164         if (policy->cpu != 0)
 165                 return -EINVAL;
 166
 167         if (s3c64xx_freq_table == NULL) {
 168                 pr_err("No frequency information for this CPU\n");
 169                 return -ENODEV;
 170         }
 171
 172         armclk = clk_get(NULL, "armclk");
 173         if (IS_ERR(armclk)) {
 174                 pr_err("Unable to obtain ARMCLK: %ld\n",
 175                        PTR_ERR(armclk));
 176                 return PTR_ERR(armclk);
 177         }
 178
 179 #ifdef CONFIG_REGULATOR
 180         vddarm = regulator_get(NULL, "vddarm");
 181         if (IS_ERR(vddarm)) {
 182                 ret = PTR_ERR(vddarm);
 183                 pr_err("Failed to obtain VDDARM: %d\n", ret);
 184                 pr_err("Only frequency scaling available\n");
 185                 vddarm = NULL;
 186         } else {
 187                 s3c64xx_cpufreq_config_regulator();
 188         }
 189 #endif
 190
 191         freq = s3c64xx_freq_table;
 192         while (freq->frequency != CPUFREQ_TABLE_END) {
 193                 unsigned long r;
 194
 195                 /* Check for frequencies we can generate */
 196                 r = clk_round_rate(armclk, freq->frequency * 1000);
 197                 r /= 1000;
 198                 if (r != freq->frequency) {
 199                         pr_debug("%dkHz unsupported by clock\n",
 200                                  freq->frequency);
 201                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 202                 }
 203
 204                 /* If we have no regulator then assume startup
 205                  * frequency is the maximum we can support. */
 206                 if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
 207                         freq->frequency = CPUFREQ_ENTRY_INVALID;
 208
 209                 freq++;
 210         }
 211
 212         /* Datasheet says PLL stabalisation time (if we were to use
 213          * the PLLs, which we don't currently) is ~300us worst case,
 214          * but add some fudge.
 215          */
 216         ret = cpufreq_generic_init(policy, s3c64xx_freq_table,
 217                         (500 * 1000) + regulator_latency);
 218         if (ret != 0) {
 219                 pr_err("Failed to configure frequency table: %d\n",
 220                        ret);
 221                 regulator_put(vddarm);
 222                 clk_put(armclk);
 223         }
 224
 225         return ret;
 226 }
 227
 228 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
 229         .flags          = 0,
 230         .verify         = cpufreq_generic_frequency_table_verify,
 231         .target_index   = s3c64xx_cpufreq_set_target,
 232         .get            = s3c64xx_cpufreq_get_speed,
 233         .init           = s3c64xx_cpufreq_driver_init,
 234         .name           = "s3c",
 235 };
 236
 237 static int __init s3c64xx_cpufreq_init(void)
 238 {
 239         return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
 240 }
 241 module_init(s3c64xx_cpufreq_init);