drivers/dma/Kconfig

   1 #
   2 # DMA engine configuration
   3 #
   4
   5 menuconfig DMADEVICES
   6         bool "DMA Engine support"
   7         depends on HAS_DMA
   8         help
   9           DMA engines can do asynchronous data transfers without
  10           involving the host CPU.  Currently, this framework can be
  11           used to offload memory copies in the network stack and
  12           RAID operations in the MD driver.  This menu only presents
  13           DMA Device drivers supported by the configured arch, it may
  14           be empty in some cases.
  15
  16 config DMADEVICES_DEBUG
  17         bool "DMA Engine debugging"
  18         depends on DMADEVICES != n
  19         help
  20           This is an option for use by developers; most people should
  21           say N here.  This enables DMA engine core and driver debugging.
  22
  23 config DMADEVICES_VDEBUG
  24         bool "DMA Engine verbose debugging"
  25         depends on DMADEVICES_DEBUG != n
  26         help
  27           This is an option for use by developers; most people should
  28           say N here.  This enables deeper (more verbose) debugging of
  29           the DMA engine core and drivers.
  30
  31
  32 if DMADEVICES
  33
  34 comment "DMA Devices"
  35
  36 config INTEL_MIC_X100_DMA
  37         tristate "Intel MIC X100 DMA Driver"
  38         depends on 64BIT && X86 && INTEL_MIC_BUS
  39         select DMA_ENGINE
  40         help
  41           This enables DMA support for the Intel Many Integrated Core
  42           (MIC) family of PCIe form factor coprocessor X100 devices that
  43           run a 64 bit Linux OS. This driver will be used by both MIC
  44           host and card drivers.
  45
  46           If you are building host kernel with a MIC device or a card
  47           kernel for a MIC device, then say M (recommended) or Y, else
  48           say N. If unsure say N.
  49
  50           More information about the Intel MIC family as well as the Linux
  51           OS and tools for MIC to use with this driver are available from
  52           <http://software.intel.com/en-us/mic-developer>.
  53
  54 config ASYNC_TX_ENABLE_CHANNEL_SWITCH
  55         bool
  56
  57 config AMBA_PL08X
  58         bool "ARM PrimeCell PL080 or PL081 support"
  59         depends on ARM_AMBA
  60         select DMA_ENGINE
  61         select DMA_VIRTUAL_CHANNELS
  62         help
  63           Platform has a PL08x DMAC device
  64           which can provide DMA engine support
  65
  66 config INTEL_IOATDMA
  67         tristate "Intel I/OAT DMA support"
  68         depends on PCI && X86
  69         select DMA_ENGINE
  70         select DMA_ENGINE_RAID
  71         select DCA
  72         help
  73           Enable support for the Intel(R) I/OAT DMA engine present
  74           in recent Intel Xeon chipsets.
  75
  76           Say Y here if you have such a chipset.
  77
  78           If unsure, say N.
  79
  80 config INTEL_IOP_ADMA
  81         tristate "Intel IOP ADMA support"
  82         depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
  83         select DMA_ENGINE
  84         select ASYNC_TX_ENABLE_CHANNEL_SWITCH
  85         help
  86           Enable support for the Intel(R) IOP Series RAID engines.
  87
  88 config IDMA64
  89         tristate "Intel integrated DMA 64-bit support"
  90         select DMA_ENGINE
  91         select DMA_VIRTUAL_CHANNELS
  92         help
  93           Enable DMA support for Intel Low Power Subsystem such as found on
  94           Intel Skylake PCH.
  95
  96 source "drivers/dma/dw/Kconfig"
  97
  98 config AT_HDMAC
  99         tristate "Atmel AHB DMA support"
 100         depends on ARCH_AT91
 101         select DMA_ENGINE
 102         help
 103           Support the Atmel AHB DMA controller.
 104
 105 config AT_XDMAC
 106         tristate "Atmel XDMA support"
 107         depends on ARCH_AT91
 108         select DMA_ENGINE
 109         help
 110           Support the Atmel XDMA controller.
 111
 112 config FSL_DMA
 113         tristate "Freescale Elo series DMA support"
 114         depends on FSL_SOC
 115         select DMA_ENGINE
 116         select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 117         ---help---
 118           Enable support for the Freescale Elo series DMA controllers.
 119           The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
 120           EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
 121           some Txxx and Bxxx parts.
 122
 123 config FSL_RAID
 124         tristate "Freescale RAID engine Support"
 125         depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
 126         select DMA_ENGINE
 127         select DMA_ENGINE_RAID
 128         ---help---
 129           Enable support for Freescale RAID Engine. RAID Engine is
 130           available on some QorIQ SoCs (like P5020/P5040). It has
 131           the capability to offload memcpy, xor and pq computation
 132           for raid5/6.
 133
 134 source "drivers/dma/hsu/Kconfig"
 135
 136 config MPC512X_DMA
 137         tristate "Freescale MPC512x built-in DMA engine support"
 138         depends on PPC_MPC512x || PPC_MPC831x
 139         select DMA_ENGINE
 140         ---help---
 141           Enable support for the Freescale MPC512x built-in DMA engine.
 142
 143 source "drivers/dma/bestcomm/Kconfig"
 144
 145 config MV_XOR
 146         bool "Marvell XOR engine support"
 147         depends on PLAT_ORION
 148         select DMA_ENGINE
 149         select DMA_ENGINE_RAID
 150         select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 151         ---help---
 152           Enable support for the Marvell XOR engine.
 153
 154 config MX3_IPU
 155         bool "MX3x Image Processing Unit support"
 156         depends on ARCH_MXC
 157         select DMA_ENGINE
 158         default y
 159         help
 160           If you plan to use the Image Processing unit in the i.MX3x, say
 161           Y here. If unsure, select Y.
 162
 163 config MX3_IPU_IRQS
 164         int "Number of dynamically mapped interrupts for IPU"
 165         depends on MX3_IPU
 166         range 2 137
 167         default 4
 168         help
 169           Out of 137 interrupt sources on i.MX31 IPU only very few are used.
 170           To avoid bloating the irq_desc[] array we allocate a sufficient
 171           number of IRQ slots and map them dynamically to specific sources.
 172
 173 config PXA_DMA
 174         bool "PXA DMA support"
 175         depends on (ARCH_MMP || ARCH_PXA)
 176         select DMA_ENGINE
 177         select DMA_VIRTUAL_CHANNELS
 178         help
 179           Support the DMA engine for PXA. It is also compatible with MMP PDMA
 180           platform. The internal DMA IP of all PXA variants is supported, with
 181           16 to 32 channels for peripheral to memory or memory to memory
 182           transfers.
 183
 184 config TXX9_DMAC
 185         tristate "Toshiba TXx9 SoC DMA support"
 186         depends on MACH_TX49XX || MACH_TX39XX
 187         select DMA_ENGINE
 188         help
 189           Support the TXx9 SoC internal DMA controller.  This can be
 190           integrated in chips such as the Toshiba TX4927/38/39.
 191
 192 config TEGRA20_APB_DMA
 193         bool "NVIDIA Tegra20 APB DMA support"
 194         depends on ARCH_TEGRA
 195         select DMA_ENGINE
 196         help
 197           Support for the NVIDIA Tegra20 APB DMA controller driver. The
 198           DMA controller is having multiple DMA channel which can be
 199           configured for different peripherals like audio, UART, SPI,
 200           I2C etc which is in APB bus.
 201           This DMA controller transfers data from memory to peripheral fifo
 202           or vice versa. It does not support memory to memory data transfer.
 203
 204 config S3C24XX_DMAC
 205         tristate "Samsung S3C24XX DMA support"
 206         depends on ARCH_S3C24XX
 207         select DMA_ENGINE
 208         select DMA_VIRTUAL_CHANNELS
 209         help
 210           Support for the Samsung S3C24XX DMA controller driver. The
 211           DMA controller is having multiple DMA channels which can be
 212           configured for different peripherals like audio, UART, SPI.
 213           The DMA controller can transfer data from memory to peripheral,
 214           periphal to memory, periphal to periphal and memory to memory.
 215
 216 source "drivers/dma/sh/Kconfig"
 217
 218 config COH901318
 219         bool "ST-Ericsson COH901318 DMA support"
 220         select DMA_ENGINE
 221         depends on ARCH_U300
 222         help
 223           Enable support for ST-Ericsson COH 901 318 DMA.
 224
 225 config STE_DMA40
 226         bool "ST-Ericsson DMA40 support"
 227         depends on ARCH_U8500
 228         select DMA_ENGINE
 229         help
 230           Support for ST-Ericsson DMA40 controller
 231
 232 config AMCC_PPC440SPE_ADMA
 233         tristate "AMCC PPC440SPe ADMA support"
 234         depends on 440SPe || 440SP
 235         select DMA_ENGINE
 236         select DMA_ENGINE_RAID
 237         select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
 238         select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 239         help
 240           Enable support for the AMCC PPC440SPe RAID engines.
 241
 242 config TIMB_DMA
 243         tristate "Timberdale FPGA DMA support"
 244         depends on MFD_TIMBERDALE
 245         select DMA_ENGINE
 246         help
 247           Enable support for the Timberdale FPGA DMA engine.
 248
 249 config SIRF_DMA
 250         tristate "CSR SiRFprimaII/SiRFmarco DMA support"
 251         depends on ARCH_SIRF
 252         select DMA_ENGINE
 253         help
 254           Enable support for the CSR SiRFprimaII DMA engine.
 255
 256 config TI_EDMA
 257         bool "TI EDMA support"
 258         depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
 259         select DMA_ENGINE
 260         select DMA_VIRTUAL_CHANNELS
 261         select TI_PRIV_EDMA
 262         default n
 263         help
 264           Enable support for the TI EDMA controller. This DMA
 265           engine is found on TI DaVinci and AM33xx parts.
 266
 267 config TI_DMA_CROSSBAR
 268         bool
 269
 270 config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
 271         bool
 272
 273 config PL330_DMA
 274         tristate "DMA API Driver for PL330"
 275         select DMA_ENGINE
 276         depends on ARM_AMBA
 277         help
 278           Select if your platform has one or more PL330 DMACs.
 279           You need to provide platform specific settings via
 280           platform_data for a dma-pl330 device.
 281
 282 config PCH_DMA
 283         tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
 284         depends on PCI && (X86_32 || COMPILE_TEST)
 285         select DMA_ENGINE
 286         help
 287           Enable support for Intel EG20T PCH DMA engine.
 288
 289           This driver also can be used for LAPIS Semiconductor IOH(Input/
 290           Output Hub), ML7213, ML7223 and ML7831.
 291           ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
 292           for MP(Media Phone) use and ML7831 IOH is for general purpose use.
 293           ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 294           ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 295
 296 config IMX_SDMA
 297         tristate "i.MX SDMA support"
 298         depends on ARCH_MXC
 299         select DMA_ENGINE
 300         help
 301           Support the i.MX SDMA engine. This engine is integrated into
 302           Freescale i.MX25/31/35/51/53/6 chips.
 303
 304 config IMX_DMA
 305         tristate "i.MX DMA support"
 306         depends on ARCH_MXC
 307         select DMA_ENGINE
 308         help
 309           Support the i.MX DMA engine. This engine is integrated into
 310           Freescale i.MX1/21/27 chips.
 311
 312 config MXS_DMA
 313         bool "MXS DMA support"
 314         depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q
 315         select STMP_DEVICE
 316         select DMA_ENGINE
 317         help
 318           Support the MXS DMA engine. This engine including APBH-DMA
 319           and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips.
 320
 321 config EP93XX_DMA
 322         bool "Cirrus Logic EP93xx DMA support"
 323         depends on ARCH_EP93XX
 324         select DMA_ENGINE
 325         help
 326           Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller.
 327
 328 config DMA_SA11X0
 329         tristate "SA-11x0 DMA support"
 330         depends on ARCH_SA1100
 331         select DMA_ENGINE
 332         select DMA_VIRTUAL_CHANNELS
 333         help
 334           Support the DMA engine found on Intel StrongARM SA-1100 and
 335           SA-1110 SoCs.  This DMA engine can only be used with on-chip
 336           devices.
 337
 338 config MMP_TDMA
 339         bool "MMP Two-Channel DMA support"
 340         depends on ARCH_MMP
 341         select DMA_ENGINE
 342         select MMP_SRAM
 343         help
 344           Support the MMP Two-Channel DMA engine.
 345           This engine used for MMP Audio DMA and pxa910 SQU.
 346           It needs sram driver under mach-mmp.
 347
 348           Say Y here if you enabled MMP ADMA, otherwise say N.
 349
 350 config DMA_OMAP
 351         tristate "OMAP DMA support"
 352         depends on ARCH_OMAP
 353         select DMA_ENGINE
 354         select DMA_VIRTUAL_CHANNELS
 355         select TI_DMA_CROSSBAR if SOC_DRA7XX
 356
 357 config DMA_BCM2835
 358         tristate "BCM2835 DMA engine support"
 359         depends on ARCH_BCM2835
 360         select DMA_ENGINE
 361         select DMA_VIRTUAL_CHANNELS
 362
 363 config TI_CPPI41
 364         tristate "AM33xx CPPI41 DMA support"
 365         depends on ARCH_OMAP
 366         select DMA_ENGINE
 367         help
 368           The Communications Port Programming Interface (CPPI) 4.1 DMA engine
 369           is currently used by the USB driver on AM335x platforms.
 370
 371 config MMP_PDMA
 372         bool "MMP PDMA support"
 373         depends on (ARCH_MMP || ARCH_PXA)
 374         select DMA_ENGINE
 375         help
 376           Support the MMP PDMA engine for PXA and MMP platform.
 377
 378 config DMA_JZ4740
 379         tristate "JZ4740 DMA support"
 380         depends on MACH_JZ4740
 381         select DMA_ENGINE
 382         select DMA_VIRTUAL_CHANNELS
 383
 384 config DMA_JZ4780
 385         tristate "JZ4780 DMA support"
 386         depends on MACH_JZ4780
 387         select DMA_ENGINE
 388         select DMA_VIRTUAL_CHANNELS
 389         help
 390           This selects support for the DMA controller in Ingenic JZ4780 SoCs.
 391           If you have a board based on such a SoC and wish to use DMA for
 392           devices which can use the DMA controller, say Y or M here.
 393
 394 config K3_DMA
 395         tristate "Hisilicon K3 DMA support"
 396         depends on ARCH_HI3xxx
 397         select DMA_ENGINE
 398         select DMA_VIRTUAL_CHANNELS
 399         help
 400           Support the DMA engine for Hisilicon K3 platform
 401           devices.
 402
 403 config MOXART_DMA
 404         tristate "MOXART DMA support"
 405         depends on ARCH_MOXART
 406         select DMA_ENGINE
 407         select DMA_OF
 408         select DMA_VIRTUAL_CHANNELS
 409         help
 410           Enable support for the MOXA ART SoC DMA controller.
 411
 412 config FSL_EDMA
 413         tristate "Freescale eDMA engine support"
 414         depends on OF
 415         select DMA_ENGINE
 416         select DMA_VIRTUAL_CHANNELS
 417         help
 418           Support the Freescale eDMA engine with programmable channel
 419           multiplexing capability for DMA request sources(slot).
 420           This module can be found on Freescale Vybrid and LS-1 SoCs.
 421
 422 config XILINX_VDMA
 423         tristate "Xilinx AXI VDMA Engine"
 424         depends on (ARCH_ZYNQ || MICROBLAZE)
 425         select DMA_ENGINE
 426         help
 427           Enable support for Xilinx AXI VDMA Soft IP.
 428
 429           This engine provides high-bandwidth direct memory access
 430           between memory and AXI4-Stream video type target
 431           peripherals including peripherals which support AXI4-
 432           Stream Video Protocol.  It has two stream interfaces/
 433           channels, Memory Mapped to Stream (MM2S) and Stream to
 434           Memory Mapped (S2MM) for the data transfers.
 435
 436 config DMA_SUN6I
 437         tristate "Allwinner A31 SoCs DMA support"
 438         depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
 439         depends on RESET_CONTROLLER
 440         select DMA_ENGINE
 441         select DMA_VIRTUAL_CHANNELS
 442         help
 443           Support for the DMA engine first found in Allwinner A31 SoCs.
 444
 445 config NBPFAXI_DMA
 446         tristate "Renesas Type-AXI NBPF DMA support"
 447         select DMA_ENGINE
 448         depends on ARM || COMPILE_TEST
 449         help
 450           Support for "Type-AXI" NBPF DMA IPs from Renesas
 451
 452 config IMG_MDC_DMA
 453         tristate "IMG MDC support"
 454         depends on MIPS || COMPILE_TEST
 455         depends on MFD_SYSCON
 456         select DMA_ENGINE
 457         select DMA_VIRTUAL_CHANNELS
 458         help
 459           Enable support for the IMG multi-threaded DMA controller (MDC).
 460
 461 config XGENE_DMA
 462         tristate "APM X-Gene DMA support"
 463         depends on ARCH_XGENE || COMPILE_TEST
 464         select DMA_ENGINE
 465         select DMA_ENGINE_RAID
 466         select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 467         help
 468           Enable support for the APM X-Gene SoC DMA engine.
 469
 470 config DMA_ENGINE
 471         bool
 472
 473 config DMA_VIRTUAL_CHANNELS
 474         tristate
 475
 476 config DMA_ACPI
 477         def_bool y
 478         depends on ACPI
 479
 480 config DMA_OF
 481         def_bool y
 482         depends on OF
 483         select DMA_ENGINE
 484
 485 comment "DMA Clients"
 486         depends on DMA_ENGINE
 487
 488 config ASYNC_TX_DMA
 489         bool "Async_tx: Offload support for the async_tx api"
 490         depends on DMA_ENGINE
 491         help
 492           This allows the async_tx api to take advantage of offload engines for
 493           memcpy, memset, xor, and raid6 p+q operations.  If your platform has
 494           a dma engine that can perform raid operations and you have enabled
 495           MD_RAID456 say Y.
 496
 497           If unsure, say N.
 498
 499 config DMATEST
 500         tristate "DMA Test client"
 501         depends on DMA_ENGINE
 502         help
 503           Simple DMA test client. Say N unless you're debugging a
 504           DMA Device driver.
 505
 506 config DMA_ENGINE_RAID
 507         bool
 508
 509 config QCOM_BAM_DMA
 510         tristate "QCOM BAM DMA support"
 511         depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
 512         select DMA_ENGINE
 513         select DMA_VIRTUAL_CHANNELS
 514         ---help---
 515           Enable support for the QCOM BAM DMA controller.  This controller
 516           provides DMA capabilities for a variety of on-chip devices.
 517
 518 endif