drivers/dma/ste_dma40_ll.h

   1 /*
   2  * driver/dma/ste_dma40_ll.h
   3  *
   4  * Copyright (C) ST-Ericsson 2007-2010
   5  * License terms: GNU General Public License (GPL) version 2
   6  * Author: Per Friden <per.friden@stericsson.com>
   7  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
   8  */
   9 #ifndef STE_DMA40_LL_H
  10 #define STE_DMA40_LL_H
  11
  12 #define D40_DREG_PCBASE         0x400
  13 #define D40_DREG_PCDELTA        (8 * 4)
  14 #define D40_LLI_ALIGN           16 /* LLI alignment must be 16 bytes. */
  15
  16 #define D40_LCPA_CHAN_SIZE 32
  17 #define D40_LCPA_CHAN_DST_DELTA 16
  18
  19 #define D40_TYPE_TO_GROUP(type) (type / 16)
  20 #define D40_TYPE_TO_EVENT(type) (type % 16)
  21
  22 /* Most bits of the CFG register are the same in log as in phy mode */
  23 #define D40_SREG_CFG_MST_POS            15
  24 #define D40_SREG_CFG_TIM_POS            14
  25 #define D40_SREG_CFG_EIM_POS            13
  26 #define D40_SREG_CFG_LOG_INCR_POS       12
  27 #define D40_SREG_CFG_PHY_PEN_POS        12
  28 #define D40_SREG_CFG_PSIZE_POS          10
  29 #define D40_SREG_CFG_ESIZE_POS           8
  30 #define D40_SREG_CFG_PRI_POS             7
  31 #define D40_SREG_CFG_LBE_POS             6
  32 #define D40_SREG_CFG_LOG_GIM_POS         5
  33 #define D40_SREG_CFG_LOG_MFU_POS         4
  34 #define D40_SREG_CFG_PHY_TM_POS          4
  35 #define D40_SREG_CFG_PHY_EVTL_POS        0
  36
  37
  38 /* Standard channel parameters - basic mode (element register) */
  39 #define D40_SREG_ELEM_PHY_ECNT_POS      16
  40 #define D40_SREG_ELEM_PHY_EIDX_POS       0
  41
  42 #define D40_SREG_ELEM_PHY_ECNT_MASK     (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
  43
  44 /* Standard channel parameters - basic mode (Link register) */
  45 #define D40_SREG_LNK_PHY_TCP_POS        0
  46 #define D40_SREG_LNK_PHY_LMP_POS        1
  47 #define D40_SREG_LNK_PHY_PRE_POS        2
  48 /*
  49  * Source  destination link address. Contains the
  50  * 29-bit byte word aligned address of the reload area.
  51  */
  52 #define D40_SREG_LNK_PHYS_LNK_MASK      0xFFFFFFF8UL
  53
  54 /* Standard basic channel logical mode */
  55
  56 /* Element register */
  57 #define D40_SREG_ELEM_LOG_ECNT_POS      16
  58 #define D40_SREG_ELEM_LOG_LIDX_POS       8
  59 #define D40_SREG_ELEM_LOG_LOS_POS        1
  60 #define D40_SREG_ELEM_LOG_TCP_POS        0
  61
  62 #define D40_SREG_ELEM_LOG_LIDX_MASK     (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
  63
  64 /* Link register */
  65 #define D40_DEACTIVATE_EVENTLINE        0x0
  66 #define D40_ACTIVATE_EVENTLINE          0x1
  67 #define D40_EVENTLINE_POS(i)            (2 * i)
  68 #define D40_EVENTLINE_MASK(i)           (0x3 << D40_EVENTLINE_POS(i))
  69
  70 /* Standard basic channel logical params in memory */
  71
  72 /* LCSP0 */
  73 #define D40_MEM_LCSP0_ECNT_POS          16
  74 #define D40_MEM_LCSP0_SPTR_POS           0
  75
  76 #define D40_MEM_LCSP0_ECNT_MASK         (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
  77 #define D40_MEM_LCSP0_SPTR_MASK         (0xFFFF << D40_MEM_LCSP0_SPTR_POS)
  78
  79 /* LCSP1 */
  80 #define D40_MEM_LCSP1_SPTR_POS          16
  81 #define D40_MEM_LCSP1_SCFG_MST_POS      15
  82 #define D40_MEM_LCSP1_SCFG_TIM_POS      14
  83 #define D40_MEM_LCSP1_SCFG_EIM_POS      13
  84 #define D40_MEM_LCSP1_SCFG_INCR_POS     12
  85 #define D40_MEM_LCSP1_SCFG_PSIZE_POS    10
  86 #define D40_MEM_LCSP1_SCFG_ESIZE_POS     8
  87 #define D40_MEM_LCSP1_SLOS_POS           1
  88 #define D40_MEM_LCSP1_STCP_POS           0
  89
  90 #define D40_MEM_LCSP1_SPTR_MASK         (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
  91 #define D40_MEM_LCSP1_SCFG_TIM_MASK     (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
  92 #define D40_MEM_LCSP1_SCFG_INCR_MASK    (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
  93 #define D40_MEM_LCSP1_SCFG_PSIZE_MASK   (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
  94 #define D40_MEM_LCSP1_SLOS_MASK         (0x7F << D40_MEM_LCSP1_SLOS_POS)
  95 #define D40_MEM_LCSP1_STCP_MASK         (0x1 << D40_MEM_LCSP1_STCP_POS)
  96
  97 /* LCSP2 */
  98 #define D40_MEM_LCSP2_ECNT_POS          16
  99
 100 #define D40_MEM_LCSP2_ECNT_MASK         (0xFFFF << D40_MEM_LCSP2_ECNT_POS)
 101
 102 /* LCSP3 */
 103 #define D40_MEM_LCSP3_DCFG_MST_POS      15
 104 #define D40_MEM_LCSP3_DCFG_TIM_POS      14
 105 #define D40_MEM_LCSP3_DCFG_EIM_POS      13
 106 #define D40_MEM_LCSP3_DCFG_INCR_POS     12
 107 #define D40_MEM_LCSP3_DCFG_PSIZE_POS    10
 108 #define D40_MEM_LCSP3_DCFG_ESIZE_POS     8
 109 #define D40_MEM_LCSP3_DLOS_POS           1
 110 #define D40_MEM_LCSP3_DTCP_POS           0
 111
 112 #define D40_MEM_LCSP3_DLOS_MASK         (0x7F << D40_MEM_LCSP3_DLOS_POS)
 113 #define D40_MEM_LCSP3_DTCP_MASK         (0x1 << D40_MEM_LCSP3_DTCP_POS)
 114
 115
 116 /* Standard channel parameter register offsets */
 117 #define D40_CHAN_REG_SSCFG      0x00
 118 #define D40_CHAN_REG_SSELT      0x04
 119 #define D40_CHAN_REG_SSPTR      0x08
 120 #define D40_CHAN_REG_SSLNK      0x0C
 121 #define D40_CHAN_REG_SDCFG      0x10
 122 #define D40_CHAN_REG_SDELT      0x14
 123 #define D40_CHAN_REG_SDPTR      0x18
 124 #define D40_CHAN_REG_SDLNK      0x1C
 125
 126 /* DMA Register Offsets */
 127 #define D40_DREG_GCC            0x000
 128 #define D40_DREG_PRTYP          0x004
 129 #define D40_DREG_PRSME          0x008
 130 #define D40_DREG_PRSMO          0x00C
 131 #define D40_DREG_PRMSE          0x010
 132 #define D40_DREG_PRMSO          0x014
 133 #define D40_DREG_PRMOE          0x018
 134 #define D40_DREG_PRMOO          0x01C
 135 #define D40_DREG_LCPA           0x020
 136 #define D40_DREG_LCLA           0x024
 137 #define D40_DREG_ACTIVE         0x050
 138 #define D40_DREG_ACTIVO         0x054
 139 #define D40_DREG_FSEB1          0x058
 140 #define D40_DREG_FSEB2          0x05C
 141 #define D40_DREG_PCMIS          0x060
 142 #define D40_DREG_PCICR          0x064
 143 #define D40_DREG_PCTIS          0x068
 144 #define D40_DREG_PCEIS          0x06C
 145 #define D40_DREG_LCMIS0         0x080
 146 #define D40_DREG_LCMIS1         0x084
 147 #define D40_DREG_LCMIS2         0x088
 148 #define D40_DREG_LCMIS3         0x08C
 149 #define D40_DREG_LCICR0         0x090
 150 #define D40_DREG_LCICR1         0x094
 151 #define D40_DREG_LCICR2         0x098
 152 #define D40_DREG_LCICR3         0x09C
 153 #define D40_DREG_LCTIS0         0x0A0
 154 #define D40_DREG_LCTIS1         0x0A4
 155 #define D40_DREG_LCTIS2         0x0A8
 156 #define D40_DREG_LCTIS3         0x0AC
 157 #define D40_DREG_LCEIS0         0x0B0
 158 #define D40_DREG_LCEIS1         0x0B4
 159 #define D40_DREG_LCEIS2         0x0B8
 160 #define D40_DREG_LCEIS3         0x0BC
 161 #define D40_DREG_STFU           0xFC8
 162 #define D40_DREG_ICFG           0xFCC
 163 #define D40_DREG_PERIPHID0      0xFE0
 164 #define D40_DREG_PERIPHID1      0xFE4
 165 #define D40_DREG_PERIPHID2      0xFE8
 166 #define D40_DREG_PERIPHID2_REV_POS 4
 167 #define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS)
 168 #define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf
 169 #define D40_DREG_PERIPHID3      0xFEC
 170 #define D40_DREG_CELLID0        0xFF0
 171 #define D40_DREG_CELLID1        0xFF4
 172 #define D40_DREG_CELLID2        0xFF8
 173 #define D40_DREG_CELLID3        0xFFC
 174
 175 /* LLI related structures */
 176
 177 /**
 178  * struct d40_phy_lli - The basic configration register for each physical
 179  * channel.
 180  *
 181  * @reg_cfg: The configuration register.
 182  * @reg_elt: The element register.
 183  * @reg_ptr: The pointer register.
 184  * @reg_lnk: The link register.
 185  *
 186  * These registers are set up for both physical and logical transfers
 187  * Note that the bit in each register means differently in logical and
 188  * physical(standard) mode.
 189  *
 190  * This struct must be 16 bytes aligned, and only contain physical registers
 191  * since it will be directly accessed by the DMA.
 192  */
 193 struct d40_phy_lli {
 194         u32 reg_cfg;
 195         u32 reg_elt;
 196         u32 reg_ptr;
 197         u32 reg_lnk;
 198 };
 199
 200 /**
 201  * struct d40_phy_lli_bidir - struct for a transfer.
 202  *
 203  * @src: Register settings for src channel.
 204  * @dst: Register settings for dst channel.
 205  * @dst_addr: Physical destination address.
 206  * @src_addr: Physical source address.
 207  *
 208  * All DMA transfers have a source and a destination.
 209  */
 210
 211 struct d40_phy_lli_bidir {
 212         struct d40_phy_lli      *src;
 213         struct d40_phy_lli      *dst;
 214         dma_addr_t               dst_addr;
 215         dma_addr_t               src_addr;
 216 };
 217
 218
 219 /**
 220  * struct d40_log_lli - logical lli configuration
 221  *
 222  * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
 223  * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
 224  *
 225  * This struct must be 8 bytes aligned since it will be accessed directy by
 226  * the DMA. Never add any none hw mapped registers to this struct.
 227  */
 228
 229 struct d40_log_lli {
 230         u32 lcsp02;
 231         u32 lcsp13;
 232 };
 233
 234 /**
 235  * struct d40_log_lli_bidir - For both src and dst
 236  *
 237  * @src: pointer to src lli configuration.
 238  * @dst: pointer to dst lli configuration.
 239  *
 240  * You always have a src and a dst when doing DMA transfers.
 241  */
 242
 243 struct d40_log_lli_bidir {
 244         struct d40_log_lli *src;
 245         struct d40_log_lli *dst;
 246 };
 247
 248 /**
 249  * struct d40_log_lli_full - LCPA layout
 250  *
 251  * @lcsp0: Logical Channel Standard Param 0 - Src.
 252  * @lcsp1: Logical Channel Standard Param 1 - Src.
 253  * @lcsp2: Logical Channel Standard Param 2 - Dst.
 254  * @lcsp3: Logical Channel Standard Param 3 - Dst.
 255  *
 256  * This struct maps to LCPA physical memory layout. Must map to
 257  * the hw.
 258  */
 259 struct d40_log_lli_full {
 260         u32 lcsp0;
 261         u32 lcsp1;
 262         u32 lcsp2;
 263         u32 lcsp3;
 264 };
 265
 266 /**
 267  * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
 268  *
 269  * @lcsp3: The default configuration for dst.
 270  * @lcsp1: The default configuration for src.
 271  */
 272 struct d40_def_lcsp {
 273         u32 lcsp3;
 274         u32 lcsp1;
 275 };
 276
 277 /**
 278  * struct d40_lcla_elem - Info for one LCA element.
 279  *
 280  * @src_id: logical channel src id
 281  * @dst_id: logical channel dst id
 282  * @src: LCPA formated src parameters
 283  * @dst: LCPA formated dst parameters
 284  *
 285  */
 286 struct d40_lcla_elem {
 287         int                     src_id;
 288         int                     dst_id;
 289         struct d40_log_lli     *src;
 290         struct d40_log_lli     *dst;
 291 };
 292
 293 /* Physical channels */
 294
 295 void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
 296                  u32 *src_cfg, u32 *dst_cfg, bool is_log);
 297
 298 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
 299                  u32 *lcsp1, u32 *lcsp2);
 300
 301 int d40_phy_sg_to_lli(struct scatterlist *sg,
 302                       int sg_len,
 303                       dma_addr_t target,
 304                       struct d40_phy_lli *lli,
 305                       dma_addr_t lli_phys,
 306                       u32 reg_cfg,
 307                       u32 data_width,
 308                       int psize);
 309
 310 int d40_phy_fill_lli(struct d40_phy_lli *lli,
 311                      dma_addr_t data,
 312                      u32 data_size,
 313                      int psize,
 314                      dma_addr_t next_lli,
 315                      u32 reg_cfg,
 316                      bool term_int,
 317                      u32 data_width,
 318                      bool is_device);
 319
 320 void d40_phy_lli_write(void __iomem *virtbase,
 321                        u32 phy_chan_num,
 322                        struct d40_phy_lli *lli_dst,
 323                        struct d40_phy_lli *lli_src);
 324
 325 /* Logical channels */
 326
 327 void d40_log_fill_lli(struct d40_log_lli *lli,
 328                       dma_addr_t data, u32 data_size,
 329                       u32 lli_next_off, u32 reg_cfg,
 330                       u32 data_width,
 331                       bool term_int, bool addr_inc);
 332
 333 int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
 334                       struct scatterlist *sg,
 335                       int sg_len,
 336                       struct d40_log_lli_bidir *lli,
 337                       struct d40_def_lcsp *lcsp,
 338                       u32 src_data_width,
 339                       u32 dst_data_width,
 340                       enum dma_data_direction direction,
 341                       dma_addr_t dev_addr, int max_len,
 342                       int llis_per_log);
 343
 344 int d40_log_lli_write(struct d40_log_lli_full *lcpa,
 345                       struct d40_log_lli *lcla_src,
 346                       struct d40_log_lli *lcla_dst,
 347                       struct d40_log_lli *lli_dst,
 348                       struct d40_log_lli *lli_src,
 349                       int llis_per_log);
 350
 351 int d40_log_sg_to_lli(int lcla_id,
 352                       struct scatterlist *sg,
 353                       int sg_len,
 354                       struct d40_log_lli *lli_sg,
 355                       u32 lcsp13, /* src or dst*/
 356                       u32 data_width,
 357                       int max_len, int llis_per_log);
 358
 359 #endif /* STE_DMA40_LLI_H */