drivers/edac/Kconfig

   1 #
   2 #       EDAC Kconfig
   3 #       Copyright (c) 2003 Linux Networx
   4 #       Licensed and distributed under the GPL
   5 #
   6 # $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
   7 #
   8
   9 menu 'EDAC - error detection and reporting (RAS)'
  10
  11 config EDAC
  12         tristate "EDAC core system error reporting"
  13         depends on X86
  14         help
  15           EDAC is designed to report errors in the core system.
  16           These are low-level errors that are reported in the CPU or
  17           supporting chipset: memory errors, cache errors, PCI errors,
  18           thermal throttling, etc..  If unsure, select 'Y'.
  19
  20
  21 comment "Reporting subsystems"
  22         depends on EDAC
  23
  24 config EDAC_DEBUG
  25         bool "Debugging"
  26         depends on EDAC
  27         help
  28           This turns on debugging information for the entire EDAC
  29           sub-system. You can insert module with "debug_level=x", current
  30           there're four debug levels (x=0,1,2,3 from low to high).
  31           Usually you should select 'N'.
  32
  33 config EDAC_MM_EDAC
  34         tristate "Main Memory EDAC (Error Detection And Correction) reporting"
  35         depends on EDAC
  36         default y
  37         help
  38           Some systems are able to detect and correct errors in main
  39           memory.  EDAC can report statistics on memory error
  40           detection and correction (EDAC - or commonly referred to ECC
  41           errors).  EDAC will also try to decode where these errors
  42           occurred so that a particular failing memory module can be
  43           replaced.  If unsure, select 'Y'.
  44
  45
  46 config EDAC_AMD76X
  47         tristate "AMD 76x (760, 762, 768)"
  48         depends on EDAC_MM_EDAC && PCI && X86_32
  49         help
  50           Support for error detection and correction on the AMD 76x
  51           series of chipsets used with the Athlon processor.
  52
  53 config EDAC_E7XXX
  54         tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
  55         depends on EDAC_MM_EDAC && PCI
  56         help
  57           Support for error detection and correction on the Intel
  58           E7205, E7500, E7501 and E7505 server chipsets.
  59
  60 config EDAC_E752X
  61         tristate "Intel e752x (e7520, e7525, e7320)"
  62         depends on EDAC_MM_EDAC && PCI
  63         help
  64           Support for error detection and correction on the Intel
  65           E7520, E7525, E7320 server chipsets.
  66
  67 config EDAC_I82875P
  68         tristate "Intel 82875p (D82875P, E7210)"
  69         depends on EDAC_MM_EDAC && PCI
  70         help
  71           Support for error detection and correction on the Intel
  72           DP82785P and E7210 server chipsets.
  73
  74 config EDAC_I82860
  75         tristate "Intel 82860"
  76         depends on EDAC_MM_EDAC && PCI
  77         help
  78           Support for error detection and correction on the Intel
  79           82860 chipset.
  80
  81 config EDAC_R82600
  82         tristate "Radisys 82600 embedded chipset"
  83         depends on EDAC_MM_EDAC
  84         help
  85           Support for error detection and correction on the Radisys
  86           82600 embedded chipset.
  87
  88 choice
  89         prompt "Error detecting method"
  90         depends on EDAC
  91         default EDAC_POLL
  92
  93 config EDAC_POLL
  94         bool "Poll for errors"
  95         depends on EDAC
  96         help
  97           Poll the chipset periodically to detect errors.
  98
  99 endchoice
 100
 101 endmenu