powerpc: Don't do generic calibrate_delay()

[deliverable/linux.git] / drivers / edac / amd64_edac.h

/*
 * AMD64 class Memory Controller kernel module
 *
 * Copyright (c) 2009 SoftwareBitMaker.
 * Copyright (c) 2009 Advanced Micro Devices, Inc.
 *
 * This file may be distributed under the terms of the
 * GNU General Public License.
 *
 *      Originally Written by Thayne Harbaugh
 *
 *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
 *              - K8 CPU Revision D and greater support
 *
 *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
 *              - Module largely rewritten, with new (and hopefully correct)
 *              code for dealing with node and chip select interleaving,
 *              various code cleanup, and bug fixes
 *              - Added support for memory hoisting using DRAM hole address
 *              register
 *
 *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
 *              -K8 Rev (1207) revision support added, required Revision
 *              specific mini-driver code to support Rev F as well as
 *              prior revisions
 *
 *      Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
 *              -Family 10h revision support added. New PCI Device IDs,
 *              indicating new changes. Actual registers modified
 *              were slight, less than the Rev E to Rev F transition
 *              but changing the PCI Device ID was the proper thing to
 *              do, as it provides for almost automactic family
 *              detection. The mods to Rev F required more family
 *              information detection.
 *
 *      Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
 *              - misc fixes and code cleanups
 *
 * This module is based on the following documents
 * (available from http://www.amd.com/):
 *
 *      Title:  BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
 *              Opteron Processors
 *      AMD publication #: 26094
 *`     Revision: 3.26
 *
 *      Title:  BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
 *              Processors
 *      AMD publication #: 32559
 *      Revision: 3.00
 *      Issue Date: May 2006
 *
 *      Title:  BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
 *              Processors
 *      AMD publication #: 31116
 *      Revision: 3.00
 *      Issue Date: September 07, 2007
 *
 * Sections in the first 2 documents are no longer in sync with each other.
 * The Family 10h BKDG was totally re-written from scratch with a new
 * presentation model.
 * Therefore, comments that refer to a Document section might be off.
 */

#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/mmzone.h>
#include <linux/edac.h>
#include <asm/msr.h>
#include "edac_core.h"

#define amd64_printk(level, fmt, arg...) \
        edac_printk(level, "amd64", fmt, ##arg)

#define amd64_mc_printk(mci, level, fmt, arg...) \
        edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)

/*
 * Throughout the comments in this code, the following terms are used:
 *
 *      SysAddr, DramAddr, and InputAddr
 *
 *  These terms come directly from the amd64 documentation
 * (AMD publication #26094).  They are defined as follows:
 *
 *     SysAddr:
 *         This is a physical address generated by a CPU core or a device
 *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
 *         a virtual to physical address translation by the CPU core's address
 *         translation mechanism (MMU).
 *
 *     DramAddr:
 *         A DramAddr is derived from a SysAddr by subtracting an offset that
 *         depends on which node the SysAddr maps to and whether the SysAddr
 *         is within a range affected by memory hoisting.  The DRAM Base
 *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
 *         determine which node a SysAddr maps to.
 *
 *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
 *         is within the range of addresses specified by this register, then
 *         a value x from the DHAR is subtracted from the SysAddr to produce a
 *         DramAddr.  Here, x represents the base address for the node that
 *         the SysAddr maps to plus an offset due to memory hoisting.  See
 *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
 *         sys_addr_to_dram_addr() below for more information.
 *
 *         If the SysAddr is not affected by the DHAR then a value y is
 *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
 *         base address for the node that the SysAddr maps to.  See section
 *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
 *         information.
 *
 *     InputAddr:
 *         A DramAddr is translated to an InputAddr before being passed to the
 *         memory controller for the node that the DramAddr is associated
 *         with.  The memory controller then maps the InputAddr to a csrow.
 *         If node interleaving is not in use, then the InputAddr has the same
 *         value as the DramAddr.  Otherwise, the InputAddr is produced by
 *         discarding the bits used for node interleaving from the DramAddr.
 *         See section 3.4.4 for more information.
 *
 *         The memory controller for a given node uses its DRAM CS Base and
 *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
 *         sections 3.5.4 and 3.5.5 for more information.
 */

#define EDAC_AMD64_VERSION              " Ver: 3.2.0 " __DATE__
#define EDAC_MOD_STR                    "amd64_edac"

/* Extended Model from CPUID, for CPU Revision numbers */
#define OPTERON_CPU_LE_REV_C            0
#define OPTERON_CPU_REV_D               1
#define OPTERON_CPU_REV_E               2

/* NPT processors have the following Extended Models */
#define OPTERON_CPU_REV_F               4
#define OPTERON_CPU_REV_FA              5

/* Hardware limit on ChipSelect rows per MC and processors per system */
#define CHIPSELECT_COUNT                8
#define DRAM_REG_COUNT                  8


/*
 * PCI-defined configuration space registers
 */


/*
 * Function 1 - Address Map
 */
#define K8_DRAM_BASE_LOW                0x40
#define K8_DRAM_LIMIT_LOW               0x44
#define K8_DHAR                         0xf0

#define DHAR_VALID                      BIT(0)
#define F10_DRAM_MEM_HOIST_VALID        BIT(1)

#define DHAR_BASE_MASK                  0xff000000
#define dhar_base(dhar)                 (dhar & DHAR_BASE_MASK)

#define K8_DHAR_OFFSET_MASK             0x0000ff00
#define k8_dhar_offset(dhar)            ((dhar & K8_DHAR_OFFSET_MASK) << 16)

#define F10_DHAR_OFFSET_MASK            0x0000ff80
                                        /* NOTE: Extra mask bit vs K8 */
#define f10_dhar_offset(dhar)           ((dhar & F10_DHAR_OFFSET_MASK) << 16)


/* F10 High BASE/LIMIT registers */
#define F10_DRAM_BASE_HIGH              0x140
#define F10_DRAM_LIMIT_HIGH             0x144


/*
 * Function 2 - DRAM controller
 */
#define K8_DCSB0                        0x40
#define F10_DCSB1                       0x140

#define K8_DCSB_CS_ENABLE               BIT(0)
#define K8_DCSB_NPT_SPARE               BIT(1)
#define K8_DCSB_NPT_TESTFAIL            BIT(2)

/*
 * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form
 * the address
 */
#define REV_E_DCSB_BASE_BITS            (0xFFE0FE00ULL)
#define REV_E_DCS_SHIFT                 4
#define REV_E_DCSM_COUNT                8

#define REV_F_F1Xh_DCSB_BASE_BITS       (0x1FF83FE0ULL)
#define REV_F_F1Xh_DCS_SHIFT            8

/*
 * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount
 * to form the address
 */
#define REV_F_DCSB_BASE_BITS            (0x1FF83FE0ULL)
#define REV_F_DCS_SHIFT                 8
#define REV_F_DCSM_COUNT                4
#define F10_DCSM_COUNT                  4
#define F11_DCSM_COUNT                  2

/* DRAM CS Mask Registers */
#define K8_DCSM0                        0x60
#define F10_DCSM1                       0x160

/* REV E: select [29:21] and [15:9] from DCSM */
#define REV_E_DCSM_MASK_BITS            0x3FE0FE00

/* unused bits [24:20] and [12:0] */
#define REV_E_DCS_NOTUSED_BITS          0x01F01FFF

/* REV F and later: select [28:19] and [13:5] from DCSM */
#define REV_F_F1Xh_DCSM_MASK_BITS       0x1FF83FE0

/* unused bits [26:22] and [12:0] */
#define REV_F_F1Xh_DCS_NOTUSED_BITS     0x07C01FFF

#define DBAM0                           0x80
#define DBAM1                           0x180

/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
#define DBAM_DIMM(i, reg)               ((((reg) >> (4*i))) & 0xF)

#define DBAM_MAX_VALUE                  11


#define F10_DCLR_0                      0x90
#define F10_DCLR_1                      0x190
#define REVE_WIDTH_128                  BIT(16)
#define F10_WIDTH_128                   BIT(11)


#define F10_DCHR_0                      0x94
#define F10_DCHR_1                      0x194

#define F10_DCHR_FOUR_RANK_DIMM         BIT(18)
#define F10_DCHR_Ddr3Mode               BIT(8)
#define F10_DCHR_MblMode                BIT(6)


#define F10_DCTL_SEL_LOW                0x110

#define dct_sel_baseaddr(pvt)    \
        ((pvt->dram_ctl_select_low) & 0xFFFFF800)

#define dct_sel_interleave_addr(pvt)    \
        (((pvt->dram_ctl_select_low) >> 6) & 0x3)

enum {
        F10_DCTL_SEL_LOW_DctSelHiRngEn  = BIT(0),
        F10_DCTL_SEL_LOW_DctSelIntLvEn  = BIT(2),
        F10_DCTL_SEL_LOW_DctGangEn      = BIT(4),
        F10_DCTL_SEL_LOW_DctDatIntLv    = BIT(5),
        F10_DCTL_SEL_LOW_DramEnable     = BIT(8),
        F10_DCTL_SEL_LOW_MemCleared     = BIT(10),
};

#define    dct_high_range_enabled(pvt)    \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)

#define dct_interleave_enabled(pvt)        \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)

#define dct_ganging_enabled(pvt)        \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)

#define dct_data_intlv_enabled(pvt)    \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)

#define dct_dram_enabled(pvt)    \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)

#define dct_memory_cleared(pvt)    \
        (pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)


#define F10_DCTL_SEL_HIGH               0x114


/*
 * Function 3 - Misc Control
 */
#define K8_NBCTL                        0x40

/* Correctable ECC error reporting enable */
#define K8_NBCTL_CECCEn                 BIT(0)

/* UnCorrectable ECC error reporting enable */
#define K8_NBCTL_UECCEn                 BIT(1)

#define K8_NBCFG                        0x44
#define K8_NBCFG_CHIPKILL               BIT(23)
#define K8_NBCFG_ECC_ENABLE             BIT(22)

#define K8_NBSL                         0x48


#define EXTRACT_HIGH_SYNDROME(x)        (((x) >> 24) & 0xff)
#define EXTRACT_EXT_ERROR_CODE(x)       (((x) >> 16) & 0x1f)

/* Family F10h: Normalized Extended Error Codes */
#define F10_NBSL_EXT_ERR_RES            0x0
#define F10_NBSL_EXT_ERR_CRC            0x1
#define F10_NBSL_EXT_ERR_SYNC           0x2
#define F10_NBSL_EXT_ERR_MST            0x3
#define F10_NBSL_EXT_ERR_TGT            0x4
#define F10_NBSL_EXT_ERR_GART           0x5
#define F10_NBSL_EXT_ERR_RMW            0x6
#define F10_NBSL_EXT_ERR_WDT            0x7
#define F10_NBSL_EXT_ERR_ECC            0x8
#define F10_NBSL_EXT_ERR_DEV            0x9
#define F10_NBSL_EXT_ERR_LINK_DATA      0xA

/* Next two are overloaded values */
#define F10_NBSL_EXT_ERR_LINK_PROTO     0xB
#define F10_NBSL_EXT_ERR_L3_PROTO       0xB

#define F10_NBSL_EXT_ERR_NB_ARRAY       0xC
#define F10_NBSL_EXT_ERR_DRAM_PARITY    0xD
#define F10_NBSL_EXT_ERR_LINK_RETRY     0xE

/* Next two are overloaded values */
#define F10_NBSL_EXT_ERR_GART_WALK      0xF
#define F10_NBSL_EXT_ERR_DEV_WALK       0xF

/* 0x10 to 0x1B: Reserved */
#define F10_NBSL_EXT_ERR_L3_DATA        0x1C
#define F10_NBSL_EXT_ERR_L3_TAG         0x1D
#define F10_NBSL_EXT_ERR_L3_LRU         0x1E

/* K8: Normalized Extended Error Codes */
#define K8_NBSL_EXT_ERR_ECC             0x0
#define K8_NBSL_EXT_ERR_CRC             0x1
#define K8_NBSL_EXT_ERR_SYNC            0x2
#define K8_NBSL_EXT_ERR_MST             0x3
#define K8_NBSL_EXT_ERR_TGT             0x4
#define K8_NBSL_EXT_ERR_GART            0x5
#define K8_NBSL_EXT_ERR_RMW             0x6
#define K8_NBSL_EXT_ERR_WDT             0x7
#define K8_NBSL_EXT_ERR_CHIPKILL_ECC    0x8
#define K8_NBSL_EXT_ERR_DRAM_PARITY     0xD

#define EXTRACT_ERROR_CODE(x)           ((x) & 0xffff)
#define TEST_TLB_ERROR(x)               (((x) & 0xFFF0) == 0x0010)
#define TEST_MEM_ERROR(x)               (((x) & 0xFF00) == 0x0100)
#define TEST_BUS_ERROR(x)               (((x) & 0xF800) == 0x0800)
#define EXTRACT_TT_CODE(x)              (((x) >> 2) & 0x3)
#define EXTRACT_II_CODE(x)              (((x) >> 2) & 0x3)
#define EXTRACT_LL_CODE(x)              (((x) >> 0) & 0x3)
#define EXTRACT_RRRR_CODE(x)            (((x) >> 4) & 0xf)
#define EXTRACT_TO_CODE(x)              (((x) >> 8) & 0x1)
#define EXTRACT_PP_CODE(x)              (((x) >> 9) & 0x3)

/*
 * The following are for BUS type errors AFTER values have been normalized by
 * shifting right
 */
#define K8_NBSL_PP_SRC                  0x0
#define K8_NBSL_PP_RES                  0x1
#define K8_NBSL_PP_OBS                  0x2
#define K8_NBSL_PP_GENERIC              0x3


#define K8_NBSH                         0x4C

#define K8_NBSH_VALID_BIT               BIT(31)
#define K8_NBSH_OVERFLOW                BIT(30)
#define K8_NBSH_UNCORRECTED_ERR         BIT(29)
#define K8_NBSH_ERR_ENABLE              BIT(28)
#define K8_NBSH_MISC_ERR_VALID          BIT(27)
#define K8_NBSH_VALID_ERROR_ADDR        BIT(26)
#define K8_NBSH_PCC                     BIT(25)
#define K8_NBSH_CECC                    BIT(14)
#define K8_NBSH_UECC                    BIT(13)
#define K8_NBSH_ERR_SCRUBER             BIT(8)
#define K8_NBSH_CORE3                   BIT(3)
#define K8_NBSH_CORE2                   BIT(2)
#define K8_NBSH_CORE1                   BIT(1)
#define K8_NBSH_CORE0                   BIT(0)

#define EXTRACT_LDT_LINK(x)             (((x) >> 4) & 0x7)
#define EXTRACT_ERR_CPU_MAP(x)          ((x) & 0xF)
#define EXTRACT_LOW_SYNDROME(x)         (((x) >> 15) & 0xff)


#define K8_NBEAL                        0x50
#define K8_NBEAH                        0x54
#define K8_SCRCTRL                      0x58

#define F10_NB_CFG_LOW                  0x88
#define F10_NB_CFG_LOW_ENABLE_EXT_CFG   BIT(14)

#define F10_NB_CFG_HIGH                 0x8C

#define F10_ONLINE_SPARE                0xB0
#define F10_ONLINE_SPARE_SWAPDONE0(x)   ((x) & BIT(1))
#define F10_ONLINE_SPARE_SWAPDONE1(x)   ((x) & BIT(3))
#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007)
#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007)

#define F10_NB_ARRAY_ADDR               0xB8

#define F10_NB_ARRAY_DRAM_ECC           0x80000000

/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
#define SET_NB_ARRAY_ADDRESS(section)   (((section) & 0x3) << 1)

#define F10_NB_ARRAY_DATA               0xBC

#define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
                                        (BIT(((word) & 0xF) + 20) | \
                                        BIT(17) |  \
                                        ((bits) & 0xF))

#define SET_NB_DRAM_INJECTION_READ(word, bits)  \
                                        (BIT(((word) & 0xF) + 20) | \
                                        BIT(16) |  \
                                        ((bits) & 0xF))

#define K8_NBCAP                        0xE8
#define K8_NBCAP_CORES                  (BIT(12)|BIT(13))
#define K8_NBCAP_CHIPKILL               BIT(4)
#define K8_NBCAP_SECDED                 BIT(3)
#define K8_NBCAP_8_NODE                 BIT(2)
#define K8_NBCAP_DUAL_NODE              BIT(1)
#define K8_NBCAP_DCT_DUAL               BIT(0)

/*
 * MSR Regs
 */
#define K8_MSR_MCGCTL                   0x017b
#define K8_MSR_MCGCTL_NBE               BIT(4)

#define K8_MSR_MC4CTL                   0x0410
#define K8_MSR_MC4STAT                  0x0411
#define K8_MSR_MC4ADDR                  0x0412

/* AMD sets the first MC device at device ID 0x18. */
static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
{
        return PCI_SLOT(pdev->devfn) - 0x18;
}

enum amd64_chipset_families {
        K8_CPUS = 0,
        F10_CPUS,
        F11_CPUS,
};

/*
 * Structure to hold:
 *
 * 1) dynamically read status and error address HW registers
 * 2) sysfs entered values
 * 3) MCE values
 *
 * Depends on entry into the modules
 */
struct amd64_error_info_regs {
        u32 nbcfg;
        u32 nbsh;
        u32 nbsl;
        u32 nbeah;
        u32 nbeal;
};

/* Error injection control structure */
struct error_injection {
        u32     section;
        u32     word;
        u32     bit_map;
};

struct amd64_pvt {
        /* pci_device handles which we utilize */
        struct pci_dev *addr_f1_ctl;
        struct pci_dev *dram_f2_ctl;
        struct pci_dev *misc_f3_ctl;

        int mc_node_id;         /* MC index of this MC node */
        int ext_model;          /* extended model value of this node */

        struct low_ops *ops;    /* pointer to per PCI Device ID func table */

        int channel_count;

        /* Raw registers */
        u32 dclr0;              /* DRAM Configuration Low DCT0 reg */
        u32 dclr1;              /* DRAM Configuration Low DCT1 reg */
        u32 dchr0;              /* DRAM Configuration High DCT0 reg */
        u32 dchr1;              /* DRAM Configuration High DCT1 reg */
        u32 nbcap;              /* North Bridge Capabilities */
        u32 nbcfg;              /* F10 North Bridge Configuration */
        u32 ext_nbcfg;          /* Extended F10 North Bridge Configuration */
        u32 dhar;               /* DRAM Hoist reg */
        u32 dbam0;              /* DRAM Base Address Mapping reg for DCT0 */
        u32 dbam1;              /* DRAM Base Address Mapping reg for DCT1 */

        /* DRAM CS Base Address Registers F2x[1,0][5C:40] */
        u32 dcsb0[CHIPSELECT_COUNT];
        u32 dcsb1[CHIPSELECT_COUNT];

        /* DRAM CS Mask Registers F2x[1,0][6C:60] */
        u32 dcsm0[CHIPSELECT_COUNT];
        u32 dcsm1[CHIPSELECT_COUNT];

        /*
         * Decoded parts of DRAM BASE and LIMIT Registers
         * F1x[78,70,68,60,58,50,48,40]
         */
        u64 dram_base[DRAM_REG_COUNT];
        u64 dram_limit[DRAM_REG_COUNT];
        u8  dram_IntlvSel[DRAM_REG_COUNT];
        u8  dram_IntlvEn[DRAM_REG_COUNT];
        u8  dram_DstNode[DRAM_REG_COUNT];
        u8  dram_rw_en[DRAM_REG_COUNT];

        /*
         * The following fields are set at (load) run time, after CPU revision
         * has been determined, since the dct_base and dct_mask registers vary
         * based on revision
         */
        u32 dcsb_base;          /* DCSB base bits */
        u32 dcsm_mask;          /* DCSM mask bits */
        u32 num_dcsm;           /* Number of DCSM registers */
        u32 dcs_mask_notused;   /* DCSM notused mask bits */
        u32 dcs_shift;          /* DCSB and DCSM shift value */

        u64 top_mem;            /* top of memory below 4GB */
        u64 top_mem2;           /* top of memory above 4GB */

        u32 dram_ctl_select_low;        /* DRAM Controller Select Low Reg */
        u32 dram_ctl_select_high;       /* DRAM Controller Select High Reg */
        u32 online_spare;               /* On-Line spare Reg */

        /* temp storage for when input is received from sysfs */
        struct amd64_error_info_regs ctl_error_info;

        /* place to store error injection parameters prior to issue */
        struct error_injection injection;

        /* Save old hw registers' values before we modified them */
        u32 nbctl_mcgctl_saved;         /* When true, following 2 are valid */
        u32 old_nbctl;
        unsigned long old_mcgctl;       /* per core on this node */

        /* MC Type Index value: socket F vs Family 10h */
        u32 mc_type_index;

        /* misc settings */
        struct flags {
                unsigned long cf8_extcfg:1;
        } flags;
};

struct scrubrate {
       u32 scrubval;           /* bit pattern for scrub rate */
       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
};

extern struct scrubrate scrubrates[23];
extern u32 revf_quad_ddr2_shift[16];
extern const char *tt_msgs[4];
extern const char *ll_msgs[4];
extern const char *rrrr_msgs[16];
extern const char *to_msgs[2];
extern const char *pp_msgs[4];
extern const char *ii_msgs[4];
extern const char *ext_msgs[32];
extern const char *htlink_msgs[8];

#ifdef CONFIG_EDAC_DEBUG
#define NUM_DBG_ATTRS 9
#else
#define NUM_DBG_ATTRS 0
#endif

#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
#define NUM_INJ_ATTRS 5
#else
#define NUM_INJ_ATTRS 0
#endif

extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS],
                                     amd64_inj_attrs[NUM_INJ_ATTRS];

/*
 * Each of the PCI Device IDs types have their own set of hardware accessor
 * functions and per device encoding/decoding logic.
 */
struct low_ops {
        int (*probe_valid_hardware)(struct amd64_pvt *pvt);
        int (*early_channel_count)(struct amd64_pvt *pvt);

        u64 (*get_error_address)(struct mem_ctl_info *mci,
                        struct amd64_error_info_regs *info);
        void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
        void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
        void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
                                        struct amd64_error_info_regs *info,
                                        u64 SystemAddr);
        int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
};

struct amd64_family_type {
        const char *ctl_name;
        u16 addr_f1_ctl;
        u16 misc_f3_ctl;
        struct low_ops ops;
};

static struct amd64_family_type amd64_family_types[];

static inline const char *get_amd_family_name(int index)
{
        return amd64_family_types[index].ctl_name;
}

static inline struct low_ops *family_ops(int index)
{
        return &amd64_family_types[index].ops;
}

/*
 * For future CPU versions, verify the following as new 'slow' rates appear and
 * modify the necessary skip values for the supported CPU.
 */
#define K8_MIN_SCRUB_RATE_BITS  0x0
#define F10_MIN_SCRUB_RATE_BITS 0x5
#define F11_MIN_SCRUB_RATE_BITS 0x6

int amd64_process_error_info(struct mem_ctl_info *mci,
                             struct amd64_error_info_regs *info,
                             int handle_errors);
int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
                             u64 *hole_offset, u64 *hole_size);