drivers/firmware/dcdbas.c

   1 /*
   2  *  dcdbas.c: Dell Systems Management Base Driver
   3  *
   4  *  The Dell Systems Management Base Driver provides a sysfs interface for
   5  *  systems management software to perform System Management Interrupts (SMIs)
   6  *  and Host Control Actions (power cycle or power off after OS shutdown) on
   7  *  Dell systems.
   8  *
   9  *  See Documentation/dcdbas.txt for more information.
  10  *
  11  *  Copyright (C) 1995-2006 Dell Inc.
  12  *
  13  *  This program is free software; you can redistribute it and/or modify
  14  *  it under the terms of the GNU General Public License v2.0 as published by
  15  *  the Free Software Foundation.
  16  *
  17  *  This program is distributed in the hope that it will be useful,
  18  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  *  GNU General Public License for more details.
  21  */
  22
  23 #include <linux/platform_device.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/errno.h>
  26 #include <linux/init.h>
  27 #include <linux/kernel.h>
  28 #include <linux/mc146818rtc.h>
  29 #include <linux/module.h>
  30 #include <linux/reboot.h>
  31 #include <linux/sched.h>
  32 #include <linux/smp.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/string.h>
  35 #include <linux/types.h>
  36 #include <linux/mutex.h>
  37 #include <asm/io.h>
  38
  39 #include "dcdbas.h"
  40
  41 #define DRIVER_NAME             "dcdbas"
  42 #define DRIVER_VERSION          "5.6.0-3.2"
  43 #define DRIVER_DESCRIPTION      "Dell Systems Management Base Driver"
  44
  45 static struct platform_device *dcdbas_pdev;
  46
  47 static u8 *smi_data_buf;
  48 static dma_addr_t smi_data_buf_handle;
  49 static unsigned long smi_data_buf_size;
  50 static u32 smi_data_buf_phys_addr;
  51 static DEFINE_MUTEX(smi_data_lock);
  52
  53 static unsigned int host_control_action;
  54 static unsigned int host_control_smi_type;
  55 static unsigned int host_control_on_shutdown;
  56
  57 /**
  58  * smi_data_buf_free: free SMI data buffer
  59  */
  60 static void smi_data_buf_free(void)
  61 {
  62         if (!smi_data_buf)
  63                 return;
  64
  65         dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
  66                 __func__, smi_data_buf_phys_addr, smi_data_buf_size);
  67
  68         dma_free_coherent(&dcdbas_pdev->dev, smi_data_buf_size, smi_data_buf,
  69                           smi_data_buf_handle);
  70         smi_data_buf = NULL;
  71         smi_data_buf_handle = 0;
  72         smi_data_buf_phys_addr = 0;
  73         smi_data_buf_size = 0;
  74 }
  75
  76 /**
  77  * smi_data_buf_realloc: grow SMI data buffer if needed
  78  */
  79 static int smi_data_buf_realloc(unsigned long size)
  80 {
  81         void *buf;
  82         dma_addr_t handle;
  83
  84         if (smi_data_buf_size >= size)
  85                 return 0;
  86
  87         if (size > MAX_SMI_DATA_BUF_SIZE)
  88                 return -EINVAL;
  89
  90         /* new buffer is needed */
  91         buf = dma_alloc_coherent(&dcdbas_pdev->dev, size, &handle, GFP_KERNEL);
  92         if (!buf) {
  93                 dev_dbg(&dcdbas_pdev->dev,
  94                         "%s: failed to allocate memory size %lu\n",
  95                         __func__, size);
  96                 return -ENOMEM;
  97         }
  98         /* memory zeroed by dma_alloc_coherent */
  99
 100         if (smi_data_buf)
 101                 memcpy(buf, smi_data_buf, smi_data_buf_size);
 102
 103         /* free any existing buffer */
 104         smi_data_buf_free();
 105
 106         /* set up new buffer for use */
 107         smi_data_buf = buf;
 108         smi_data_buf_handle = handle;
 109         smi_data_buf_phys_addr = (u32) virt_to_phys(buf);
 110         smi_data_buf_size = size;
 111
 112         dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
 113                 __func__, smi_data_buf_phys_addr, smi_data_buf_size);
 114
 115         return 0;
 116 }
 117
 118 static ssize_t smi_data_buf_phys_addr_show(struct device *dev,
 119                                            struct device_attribute *attr,
 120                                            char *buf)
 121 {
 122         return sprintf(buf, "%x\n", smi_data_buf_phys_addr);
 123 }
 124
 125 static ssize_t smi_data_buf_size_show(struct device *dev,
 126                                       struct device_attribute *attr,
 127                                       char *buf)
 128 {
 129         return sprintf(buf, "%lu\n", smi_data_buf_size);
 130 }
 131
 132 static ssize_t smi_data_buf_size_store(struct device *dev,
 133                                        struct device_attribute *attr,
 134                                        const char *buf, size_t count)
 135 {
 136         unsigned long buf_size;
 137         ssize_t ret;
 138
 139         buf_size = simple_strtoul(buf, NULL, 10);
 140
 141         /* make sure SMI data buffer is at least buf_size */
 142         mutex_lock(&smi_data_lock);
 143         ret = smi_data_buf_realloc(buf_size);
 144         mutex_unlock(&smi_data_lock);
 145         if (ret)
 146                 return ret;
 147
 148         return count;
 149 }
 150
 151 static ssize_t smi_data_read(struct kobject *kobj,
 152                              struct bin_attribute *bin_attr,
 153                              char *buf, loff_t pos, size_t count)
 154 {
 155         ssize_t ret;
 156
 157         mutex_lock(&smi_data_lock);
 158         ret = memory_read_from_buffer(buf, count, &pos, smi_data_buf,
 159                                         smi_data_buf_size);
 160         mutex_unlock(&smi_data_lock);
 161         return ret;
 162 }
 163
 164 static ssize_t smi_data_write(struct kobject *kobj,
 165                               struct bin_attribute *bin_attr,
 166                               char *buf, loff_t pos, size_t count)
 167 {
 168         ssize_t ret;
 169
 170         if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
 171                 return -EINVAL;
 172
 173         mutex_lock(&smi_data_lock);
 174
 175         ret = smi_data_buf_realloc(pos + count);
 176         if (ret)
 177                 goto out;
 178
 179         memcpy(smi_data_buf + pos, buf, count);
 180         ret = count;
 181 out:
 182         mutex_unlock(&smi_data_lock);
 183         return ret;
 184 }
 185
 186 static ssize_t host_control_action_show(struct device *dev,
 187                                         struct device_attribute *attr,
 188                                         char *buf)
 189 {
 190         return sprintf(buf, "%u\n", host_control_action);
 191 }
 192
 193 static ssize_t host_control_action_store(struct device *dev,
 194                                          struct device_attribute *attr,
 195                                          const char *buf, size_t count)
 196 {
 197         ssize_t ret;
 198
 199         /* make sure buffer is available for host control command */
 200         mutex_lock(&smi_data_lock);
 201         ret = smi_data_buf_realloc(sizeof(struct apm_cmd));
 202         mutex_unlock(&smi_data_lock);
 203         if (ret)
 204                 return ret;
 205
 206         host_control_action = simple_strtoul(buf, NULL, 10);
 207         return count;
 208 }
 209
 210 static ssize_t host_control_smi_type_show(struct device *dev,
 211                                           struct device_attribute *attr,
 212                                           char *buf)
 213 {
 214         return sprintf(buf, "%u\n", host_control_smi_type);
 215 }
 216
 217 static ssize_t host_control_smi_type_store(struct device *dev,
 218                                            struct device_attribute *attr,
 219                                            const char *buf, size_t count)
 220 {
 221         host_control_smi_type = simple_strtoul(buf, NULL, 10);
 222         return count;
 223 }
 224
 225 static ssize_t host_control_on_shutdown_show(struct device *dev,
 226                                              struct device_attribute *attr,
 227                                              char *buf)
 228 {
 229         return sprintf(buf, "%u\n", host_control_on_shutdown);
 230 }
 231
 232 static ssize_t host_control_on_shutdown_store(struct device *dev,
 233                                               struct device_attribute *attr,
 234                                               const char *buf, size_t count)
 235 {
 236         host_control_on_shutdown = simple_strtoul(buf, NULL, 10);
 237         return count;
 238 }
 239
 240 /**
 241  * dcdbas_smi_request: generate SMI request
 242  *
 243  * Called with smi_data_lock.
 244  */
 245 int dcdbas_smi_request(struct smi_cmd *smi_cmd)
 246 {
 247         cpumask_t old_mask;
 248         int ret = 0;
 249
 250         if (smi_cmd->magic != SMI_CMD_MAGIC) {
 251                 dev_info(&dcdbas_pdev->dev, "%s: invalid magic value\n",
 252                          __func__);
 253                 return -EBADR;
 254         }
 255
 256         /* SMI requires CPU 0 */
 257         old_mask = current->cpus_allowed;
 258         set_cpus_allowed_ptr(current, &cpumask_of_cpu(0));
 259         if (smp_processor_id() != 0) {
 260                 dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n",
 261                         __func__);
 262                 ret = -EBUSY;
 263                 goto out;
 264         }
 265
 266         /* generate SMI */
 267         asm volatile (
 268                 "outb %b0,%w1"
 269                 : /* no output args */
 270                 : "a" (smi_cmd->command_code),
 271                   "d" (smi_cmd->command_address),
 272                   "b" (smi_cmd->ebx),
 273                   "c" (smi_cmd->ecx)
 274                 : "memory"
 275         );
 276
 277 out:
 278         set_cpus_allowed_ptr(current, &old_mask);
 279         return ret;
 280 }
 281
 282 /**
 283  * smi_request_store:
 284  *
 285  * The valid values are:
 286  * 0: zero SMI data buffer
 287  * 1: generate calling interface SMI
 288  * 2: generate raw SMI
 289  *
 290  * User application writes smi_cmd to smi_data before telling driver
 291  * to generate SMI.
 292  */
 293 static ssize_t smi_request_store(struct device *dev,
 294                                  struct device_attribute *attr,
 295                                  const char *buf, size_t count)
 296 {
 297         struct smi_cmd *smi_cmd;
 298         unsigned long val = simple_strtoul(buf, NULL, 10);
 299         ssize_t ret;
 300
 301         mutex_lock(&smi_data_lock);
 302
 303         if (smi_data_buf_size < sizeof(struct smi_cmd)) {
 304                 ret = -ENODEV;
 305                 goto out;
 306         }
 307         smi_cmd = (struct smi_cmd *)smi_data_buf;
 308
 309         switch (val) {
 310         case 2:
 311                 /* Raw SMI */
 312                 ret = dcdbas_smi_request(smi_cmd);
 313                 if (!ret)
 314                         ret = count;
 315                 break;
 316         case 1:
 317                 /* Calling Interface SMI */
 318                 smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
 319                 ret = dcdbas_smi_request(smi_cmd);
 320                 if (!ret)
 321                         ret = count;
 322                 break;
 323         case 0:
 324                 memset(smi_data_buf, 0, smi_data_buf_size);
 325                 ret = count;
 326                 break;
 327         default:
 328                 ret = -EINVAL;
 329                 break;
 330         }
 331
 332 out:
 333         mutex_unlock(&smi_data_lock);
 334         return ret;
 335 }
 336 EXPORT_SYMBOL(dcdbas_smi_request);
 337
 338 /**
 339  * host_control_smi: generate host control SMI
 340  *
 341  * Caller must set up the host control command in smi_data_buf.
 342  */
 343 static int host_control_smi(void)
 344 {
 345         struct apm_cmd *apm_cmd;
 346         u8 *data;
 347         unsigned long flags;
 348         u32 num_ticks;
 349         s8 cmd_status;
 350         u8 index;
 351
 352         apm_cmd = (struct apm_cmd *)smi_data_buf;
 353         apm_cmd->status = ESM_STATUS_CMD_UNSUCCESSFUL;
 354
 355         switch (host_control_smi_type) {
 356         case HC_SMITYPE_TYPE1:
 357                 spin_lock_irqsave(&rtc_lock, flags);
 358                 /* write SMI data buffer physical address */
 359                 data = (u8 *)&smi_data_buf_phys_addr;
 360                 for (index = PE1300_CMOS_CMD_STRUCT_PTR;
 361                      index < (PE1300_CMOS_CMD_STRUCT_PTR + 4);
 362                      index++, data++) {
 363                         outb(index,
 364                              (CMOS_BASE_PORT + CMOS_PAGE2_INDEX_PORT_PIIX4));
 365                         outb(*data,
 366                              (CMOS_BASE_PORT + CMOS_PAGE2_DATA_PORT_PIIX4));
 367                 }
 368
 369                 /* first set status to -1 as called by spec */
 370                 cmd_status = ESM_STATUS_CMD_UNSUCCESSFUL;
 371                 outb((u8) cmd_status, PCAT_APM_STATUS_PORT);
 372
 373                 /* generate SMM call */
 374                 outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
 375                 spin_unlock_irqrestore(&rtc_lock, flags);
 376
 377                 /* wait a few to see if it executed */
 378                 num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
 379                 while ((cmd_status = inb(PCAT_APM_STATUS_PORT))
 380                        == ESM_STATUS_CMD_UNSUCCESSFUL) {
 381                         num_ticks--;
 382                         if (num_ticks == EXPIRED_TIMER)
 383                                 return -ETIME;
 384                 }
 385                 break;
 386
 387         case HC_SMITYPE_TYPE2:
 388         case HC_SMITYPE_TYPE3:
 389                 spin_lock_irqsave(&rtc_lock, flags);
 390                 /* write SMI data buffer physical address */
 391                 data = (u8 *)&smi_data_buf_phys_addr;
 392                 for (index = PE1400_CMOS_CMD_STRUCT_PTR;
 393                      index < (PE1400_CMOS_CMD_STRUCT_PTR + 4);
 394                      index++, data++) {
 395                         outb(index, (CMOS_BASE_PORT + CMOS_PAGE1_INDEX_PORT));
 396                         outb(*data, (CMOS_BASE_PORT + CMOS_PAGE1_DATA_PORT));
 397                 }
 398
 399                 /* generate SMM call */
 400                 if (host_control_smi_type == HC_SMITYPE_TYPE3)
 401                         outb(ESM_APM_CMD, PCAT_APM_CONTROL_PORT);
 402                 else
 403                         outb(ESM_APM_CMD, PE1400_APM_CONTROL_PORT);
 404
 405                 /* restore RTC index pointer since it was written to above */
 406                 CMOS_READ(RTC_REG_C);
 407                 spin_unlock_irqrestore(&rtc_lock, flags);
 408
 409                 /* read control port back to serialize write */
 410                 cmd_status = inb(PE1400_APM_CONTROL_PORT);
 411
 412                 /* wait a few to see if it executed */
 413                 num_ticks = TIMEOUT_USEC_SHORT_SEMA_BLOCKING;
 414                 while (apm_cmd->status == ESM_STATUS_CMD_UNSUCCESSFUL) {
 415                         num_ticks--;
 416                         if (num_ticks == EXPIRED_TIMER)
 417                                 return -ETIME;
 418                 }
 419                 break;
 420
 421         default:
 422                 dev_dbg(&dcdbas_pdev->dev, "%s: invalid SMI type %u\n",
 423                         __func__, host_control_smi_type);
 424                 return -ENOSYS;
 425         }
 426
 427         return 0;
 428 }
 429
 430 /**
 431  * dcdbas_host_control: initiate host control
 432  *
 433  * This function is called by the driver after the system has
 434  * finished shutting down if the user application specified a
 435  * host control action to perform on shutdown.  It is safe to
 436  * use smi_data_buf at this point because the system has finished
 437  * shutting down and no userspace apps are running.
 438  */
 439 static void dcdbas_host_control(void)
 440 {
 441         struct apm_cmd *apm_cmd;
 442         u8 action;
 443
 444         if (host_control_action == HC_ACTION_NONE)
 445                 return;
 446
 447         action = host_control_action;
 448         host_control_action = HC_ACTION_NONE;
 449
 450         if (!smi_data_buf) {
 451                 dev_dbg(&dcdbas_pdev->dev, "%s: no SMI buffer\n", __func__);
 452                 return;
 453         }
 454
 455         if (smi_data_buf_size < sizeof(struct apm_cmd)) {
 456                 dev_dbg(&dcdbas_pdev->dev, "%s: SMI buffer too small\n",
 457                         __func__);
 458                 return;
 459         }
 460
 461         apm_cmd = (struct apm_cmd *)smi_data_buf;
 462
 463         /* power off takes precedence */
 464         if (action & HC_ACTION_HOST_CONTROL_POWEROFF) {
 465                 apm_cmd->command = ESM_APM_POWER_CYCLE;
 466                 apm_cmd->reserved = 0;
 467                 *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 0;
 468                 host_control_smi();
 469         } else if (action & HC_ACTION_HOST_CONTROL_POWERCYCLE) {
 470                 apm_cmd->command = ESM_APM_POWER_CYCLE;
 471                 apm_cmd->reserved = 0;
 472                 *((s16 *)&apm_cmd->parameters.shortreq.parm[0]) = (s16) 20;
 473                 host_control_smi();
 474         }
 475 }
 476
 477 /**
 478  * dcdbas_reboot_notify: handle reboot notification for host control
 479  */
 480 static int dcdbas_reboot_notify(struct notifier_block *nb, unsigned long code,
 481                                 void *unused)
 482 {
 483         switch (code) {
 484         case SYS_DOWN:
 485         case SYS_HALT:
 486         case SYS_POWER_OFF:
 487                 if (host_control_on_shutdown) {
 488                         /* firmware is going to perform host control action */
 489                         printk(KERN_WARNING "Please wait for shutdown "
 490                                "action to complete...\n");
 491                         dcdbas_host_control();
 492                 }
 493                 break;
 494         }
 495
 496         return NOTIFY_DONE;
 497 }
 498
 499 static struct notifier_block dcdbas_reboot_nb = {
 500         .notifier_call = dcdbas_reboot_notify,
 501         .next = NULL,
 502         .priority = INT_MIN
 503 };
 504
 505 static DCDBAS_BIN_ATTR_RW(smi_data);
 506
 507 static struct bin_attribute *dcdbas_bin_attrs[] = {
 508         &bin_attr_smi_data,
 509         NULL
 510 };
 511
 512 static DCDBAS_DEV_ATTR_RW(smi_data_buf_size);
 513 static DCDBAS_DEV_ATTR_RO(smi_data_buf_phys_addr);
 514 static DCDBAS_DEV_ATTR_WO(smi_request);
 515 static DCDBAS_DEV_ATTR_RW(host_control_action);
 516 static DCDBAS_DEV_ATTR_RW(host_control_smi_type);
 517 static DCDBAS_DEV_ATTR_RW(host_control_on_shutdown);
 518
 519 static struct attribute *dcdbas_dev_attrs[] = {
 520         &dev_attr_smi_data_buf_size.attr,
 521         &dev_attr_smi_data_buf_phys_addr.attr,
 522         &dev_attr_smi_request.attr,
 523         &dev_attr_host_control_action.attr,
 524         &dev_attr_host_control_smi_type.attr,
 525         &dev_attr_host_control_on_shutdown.attr,
 526         NULL
 527 };
 528
 529 static struct attribute_group dcdbas_attr_group = {
 530         .attrs = dcdbas_dev_attrs,
 531 };
 532
 533 static int __devinit dcdbas_probe(struct platform_device *dev)
 534 {
 535         int i, error;
 536
 537         host_control_action = HC_ACTION_NONE;
 538         host_control_smi_type = HC_SMITYPE_NONE;
 539
 540         /*
 541          * BIOS SMI calls require buffer addresses be in 32-bit address space.
 542          * This is done by setting the DMA mask below.
 543          */
 544         dcdbas_pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
 545         dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
 546
 547         error = sysfs_create_group(&dev->dev.kobj, &dcdbas_attr_group);
 548         if (error)
 549                 return error;
 550
 551         for (i = 0; dcdbas_bin_attrs[i]; i++) {
 552                 error = sysfs_create_bin_file(&dev->dev.kobj,
 553                                               dcdbas_bin_attrs[i]);
 554                 if (error) {
 555                         while (--i >= 0)
 556                                 sysfs_remove_bin_file(&dev->dev.kobj,
 557                                                       dcdbas_bin_attrs[i]);
 558                         sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
 559                         return error;
 560                 }
 561         }
 562
 563         register_reboot_notifier(&dcdbas_reboot_nb);
 564
 565         dev_info(&dev->dev, "%s (version %s)\n",
 566                  DRIVER_DESCRIPTION, DRIVER_VERSION);
 567
 568         return 0;
 569 }
 570
 571 static int __devexit dcdbas_remove(struct platform_device *dev)
 572 {
 573         int i;
 574
 575         unregister_reboot_notifier(&dcdbas_reboot_nb);
 576         for (i = 0; dcdbas_bin_attrs[i]; i++)
 577                 sysfs_remove_bin_file(&dev->dev.kobj, dcdbas_bin_attrs[i]);
 578         sysfs_remove_group(&dev->dev.kobj, &dcdbas_attr_group);
 579
 580         return 0;
 581 }
 582
 583 static struct platform_driver dcdbas_driver = {
 584         .driver         = {
 585                 .name   = DRIVER_NAME,
 586                 .owner  = THIS_MODULE,
 587         },
 588         .probe          = dcdbas_probe,
 589         .remove         = __devexit_p(dcdbas_remove),
 590 };
 591
 592 /**
 593  * dcdbas_init: initialize driver
 594  */
 595 static int __init dcdbas_init(void)
 596 {
 597         int error;
 598
 599         error = platform_driver_register(&dcdbas_driver);
 600         if (error)
 601                 return error;
 602
 603         dcdbas_pdev = platform_device_alloc(DRIVER_NAME, -1);
 604         if (!dcdbas_pdev) {
 605                 error = -ENOMEM;
 606                 goto err_unregister_driver;
 607         }
 608
 609         error = platform_device_add(dcdbas_pdev);
 610         if (error)
 611                 goto err_free_device;
 612
 613         return 0;
 614
 615  err_free_device:
 616         platform_device_put(dcdbas_pdev);
 617  err_unregister_driver:
 618         platform_driver_unregister(&dcdbas_driver);
 619         return error;
 620 }
 621
 622 /**
 623  * dcdbas_exit: perform driver cleanup
 624  */
 625 static void __exit dcdbas_exit(void)
 626 {
 627         /*
 628          * make sure functions that use dcdbas_pdev are called
 629          * before platform_device_unregister
 630          */
 631         unregister_reboot_notifier(&dcdbas_reboot_nb);
 632         smi_data_buf_free();
 633         platform_device_unregister(dcdbas_pdev);
 634         platform_driver_unregister(&dcdbas_driver);
 635
 636         /*
 637          * We have to free the buffer here instead of dcdbas_remove
 638          * because only in module exit function we can be sure that
 639          * all sysfs attributes belonging to this module have been
 640          * released.
 641          */
 642         smi_data_buf_free();
 643 }
 644
 645 module_init(dcdbas_init);
 646 module_exit(dcdbas_exit);
 647
 648 MODULE_DESCRIPTION(DRIVER_DESCRIPTION " (version " DRIVER_VERSION ")");
 649 MODULE_VERSION(DRIVER_VERSION);
 650 MODULE_AUTHOR("Dell Inc.");
 651 MODULE_LICENSE("GPL");
 652 /* Any System or BIOS claiming to be by Dell */
 653 MODULE_ALIAS("dmi:*:[bs]vnD[Ee][Ll][Ll]*:*");