2 # GPIO infrastructure and drivers
5 config ARCH_WANT_OPTIONAL_GPIOLIB
8 Select this config option from the architecture Kconfig, if
9 it is possible to use gpiolib on the architecture, but let the
10 user decide whether to actually build it or not.
11 Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
12 not depend on GPIOs being available, but rather let the user
13 decide whether he needs it or not.
15 config ARCH_REQUIRE_GPIOLIB
19 Platforms select gpiolib if they use this infrastructure
20 for all their GPIOs, usually starting with ones integrated
22 Selecting this from the architecture code will cause the gpiolib
23 code to always get built in.
29 depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
32 This enables GPIO support through the generic GPIO library.
33 You only need to enable this, if you also want to enable
34 one or more of the GPIO drivers below.
41 bool "Debug GPIO calls"
42 depends on DEBUG_KERNEL
44 Say Y here to add some extra checks and diagnostics to GPIO calls.
45 These checks help ensure that GPIOs have been properly initialized
46 before they are used, and that sleeping calls are not made from
47 non-sleeping contexts. They can make bitbanged serial protocols
48 slower. The diagnostics help catch the type of setup errors
49 that are most common when setting up new platforms or boards.
52 bool "/sys/class/gpio/... (sysfs interface)"
53 depends on SYSFS && EXPERIMENTAL
55 Say Y here to add a sysfs interface for GPIOs.
57 This is mostly useful to work around omissions in a system's
58 kernel support. Those are common in custom and semicustom
59 hardware assembled using standard kernels with a minimum of
60 custom patches. In those cases, userspace code may import
61 a given GPIO from the kernel, if no kernel driver requested it.
63 Kernel drivers may also request that a particular GPIO be
64 exported to userspace; this can be useful when debugging.
69 # put drivers in the right section, in alphabetical order
72 tristate "Dialog DA9052 GPIO"
73 depends on PMIC_DA9052
75 Say yes here to enable the GPIO driver for the DA9052 chip.
80 comment "Memory mapped GPIO drivers:"
82 config GPIO_GENERIC_PLATFORM
83 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
86 Say yes here to support basic platform_device memory-mapped GPIO controllers.
89 tristate "IT8761E GPIO support"
91 Say yes here to support GPIO functionality of IT8761E super I/O chip.
95 depends on ARCH_EP93XX
100 depends on PPC_MPC52xx
103 bool "MPC512x/MPC8xxx GPIO support"
104 depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
105 FSL_SOC_BOOKE || PPC_86xx
107 Say Y here if you're going to use hardware that connects to the
108 MPC512x/831x/834x/837x/8572/8610 GPIOs.
111 tristate "Qualcomm MSM GPIO v1"
112 depends on GPIOLIB && ARCH_MSM
114 Say yes here to support the GPIO interface on ARM v6 based
115 Qualcomm MSM chips. Most of the pins on the MSM can be
116 selected for GPIO, and are controlled by this driver.
119 tristate "Qualcomm MSM GPIO v2"
120 depends on GPIOLIB && ARCH_MSM
122 Say yes here to support the GPIO interface on ARM v7 based
123 Qualcomm MSM chips. Most of the pins on the MSM can be
124 selected for GPIO, and are controlled by this driver.
130 select GENERIC_IRQ_CHIP
136 select GENERIC_IRQ_CHIP
139 bool "PrimeCell PL061 GPIO support"
141 select GENERIC_IRQ_CHIP
143 Say yes here to support the PrimeCell PL061 GPIO device
146 bool "Xilinx GPIO support"
147 depends on PPC_OF || MICROBLAZE
149 Say yes here to support the Xilinx FPGA GPIO device
152 tristate "NEC VR4100 series General-purpose I/O Uint support"
153 depends on CPU_VR41XX
155 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
158 tristate "Intel SCH/TunnelCreek GPIO"
159 depends on PCI && X86
163 Say yes here to support GPIO interface on Intel Poulsbo SCH
164 or Intel Tunnel Creek processor.
165 The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
166 powered by the core power rail and are turned off during sleep
167 modes (S3 and higher). The remaining four GPIOs are powered by
168 the Intel SCH suspend power supply. These GPIOs remain
169 active during S3. The suspend powered GPIOs can be used to wake the
170 system from the Suspend-to-RAM state.
171 The Intel Tunnel Creek processor has 5 GPIOs powered by the
172 core power rail and 9 from suspend power supply.
175 bool "ST-Ericsson U300 COH 901 335/571 GPIO"
176 depends on GPIOLIB && ARCH_U300
178 Say yes here to support GPIO interface on ST-Ericsson U300.
179 The names of the two IP block variants supported are
180 COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
181 ports of 8 GPIO pins each.
184 tristate "VIA VX855/VX875 GPIO"
189 Support access to the VX855/VX875 GPIO lines through the gpio library.
191 This driver provides common support for accessing the device,
192 additional drivers must be enabled in order to use the
193 functionality of the device.
195 comment "I2C GPIO expanders:"
198 tristate "Maxim MAX7300 GPIO expander"
202 GPIO driver for Maxim MAX7301 I2C-based GPIO expander.
205 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
208 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
209 Port Expanders. Each IO port on these chips has a fixed role of
210 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
211 Input and Output (designed by 'P'). The combinations are listed
214 8 bits: max7319 (8I), max7320 (8O), max7321 (8P),
215 max7322 (4I4O), max7323 (4P4O)
217 16 bits: max7324 (8I8O), max7325 (8P8O),
218 max7326 (4I12O), max7327 (4P12O)
220 Board setup code must specify the model to use, and the start
221 number for these GPIOs.
223 config GPIO_MAX732X_IRQ
224 bool "Interrupt controller support for MAX732x"
225 depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
227 Say yes here to enable the max732x to be used as an interrupt
228 controller. It requires the driver to be built in the kernel.
231 tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
234 Say yes here to provide access to several register-oriented
235 SMBus I/O expanders, made mostly by NXP or TI. Compatible
238 4 bits: pca9536, pca9537
240 8 bits: max7310, pca9534, pca9538, pca9554, pca9557,
243 16 bits: pca9535, pca9539, pca9555, tca6416
245 config GPIO_PCA953X_IRQ
246 bool "Interrupt controller support for PCA953x"
247 depends on GPIO_PCA953X=y
249 Say yes here to enable the pca953x to be used as an interrupt
250 controller. It requires the driver to be built in the kernel.
253 tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
256 Say yes here to provide access to most "quasi-bidirectional" I2C
257 GPIO expanders used for additional digital outputs or inputs.
258 Most of these parts are from NXP, though TI is a second source for
259 some of them. Compatible models include:
261 8 bits: pcf8574, pcf8574a, pca8574, pca8574a,
262 pca9670, pca9672, pca9674, pca9674a,
265 16 bits: pcf8575, pcf8575c, pca8575,
266 pca9671, pca9673, pca9675
268 Your board setup code will need to declare the expanders in
269 use, and assign numbers to the GPIOs they expose. Those GPIOs
270 can then be used from drivers and other kernel code, just like
271 other GPIOs, but only accessible from task contexts.
273 This driver provides an in-kernel interface to those GPIOs using
274 platform-neutral GPIO calls.
277 bool "Semtech SX150x I2C GPIO expander"
281 Say yes here to provide support for Semtech SX150-series I2C
282 GPIO expanders. Compatible models include:
291 This enables support for the GPIOs found on the STMPE I/O
296 depends on MFD_TC3589X
298 This enables support for the GPIOs found on the TC3589X
302 tristate "TI TPS65912 GPIO"
303 depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
305 This driver supports TPS65912 gpio chip
308 tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
309 depends on TWL4030_CORE
311 Say yes here to access the GPIO signals of various multi-function
312 power management chips from Texas Instruments.
315 tristate "WM831x GPIOs"
316 depends on MFD_WM831X
318 Say yes here to access the GPIO signals of WM831x power management
319 chips from Wolfson Microelectronics.
322 tristate "WM8350 GPIOs"
323 depends on MFD_WM8350
325 Say yes here to access the GPIO signals of WM8350 power management
326 chips from Wolfson Microelectronics.
329 tristate "WM8994 GPIOs"
330 depends on MFD_WM8994
332 Say yes here to access the GPIO signals of WM8994 audio hub
333 CODECs from Wolfson Microelectronics.
336 tristate "GPIO Support for ADP5520 PMIC"
337 depends on PMIC_ADP5520
339 This option enables support for on-chip GPIO found
340 on Analog Devices ADP5520 PMICs.
343 tristate "ADP5588 I2C GPIO expander"
346 This option enables support for 18 GPIOs found
347 on Analog Devices ADP5588 GPIO Expanders.
349 config GPIO_ADP5588_IRQ
350 bool "Interrupt controller support for ADP5588"
351 depends on GPIO_ADP5588=y
353 Say yes here to enable the adp5588 to be used as an interrupt
354 controller. It requires the driver to be built in the kernel.
356 comment "PCI GPIO expanders:"
359 tristate "AMD CS5535/CS5536 GPIO support"
360 depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535
362 The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
363 can be used for quite a number of things. The CS5535/6 is found on
364 AMD Geode and Lemote Yeeloong devices.
369 tristate "BT8XX GPIO abuser"
370 depends on PCI && VIDEO_BT848=n
372 The BT8xx frame grabber chip has 24 GPIO pins than can be abused
373 as a cheap PCI GPIO card.
375 This chip can be found on Miro, Hauppauge and STB TV-cards.
377 The card needs to be physically altered for using it as a
378 GPIO card. For more information on how to build a GPIO card
379 from a BT8xx TV card, see the documentation file at
380 Documentation/bt8xxgpio.txt
385 bool "Intel Langwell/Penwell GPIO support"
386 depends on PCI && X86
388 Say Y here to support Intel Langwell/Penwell GPIO.
391 tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
392 depends on PCI && X86
393 select GENERIC_IRQ_CHIP
395 This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
396 which is an IOH(Input/Output Hub) for x86 embedded processor.
397 This driver can access PCH GPIO device.
399 This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
401 ML7223 IOH is for MP(Media Phone) use.
402 ML7223 is companion chip for Intel Atom E6xx series.
403 ML7223 is completely compatible for Intel EG20T PCH.
406 tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
408 select GENERIC_IRQ_CHIP
410 ML7213 is companion chip for Intel Atom E6xx series.
411 This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
412 Hub) which is for IVI(In-Vehicle Infotainment) use.
413 This driver can access the IOH's GPIO device.
415 config GPIO_TIMBERDALE
416 bool "Support for timberdale GPIO IP"
417 depends on MFD_TIMBERDALE && HAS_IOMEM
419 Add support for the GPIO IP in the timberdale FPGA.
422 tristate "RDC R-321x GPIO support"
427 Support for the RDC R321x SoC GPIOs over southbridge
428 PCI configuration space.
430 comment "SPI GPIO expanders:"
433 tristate "Maxim MAX7301 GPIO expander"
434 depends on SPI_MASTER
437 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
440 tristate "Microchip MCP23xxx I/O expander"
441 depends on SPI_MASTER || I2C
443 SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
445 This provides a GPIO interface supporting inputs and outputs.
448 tristate "Freescale MC33880 high-side/low-side switch"
449 depends on SPI_MASTER
451 SPI driver for Freescale MC33880 high-side/low-side switch.
452 This provides GPIO interface supporting inputs and outputs.
455 tristate "74x164 serial-in/parallel-out 8-bits shift register"
456 depends on SPI_MASTER
458 Platform driver for 74x164 compatible serial-in/parallel-out
459 8-outputs shift registers. This driver can be used to provide access
460 to more gpio outputs.
462 comment "AC97 GPIO expanders:"
465 bool "Philips UCB1400 GPIO"
466 depends on UCB1400_CORE
468 This enables support for the Philips UCB1400 GPIO pins.
469 The UCB1400 is an AC97 audio codec.
471 comment "MODULbus GPIO expanders:"
474 tristate "Janz VMOD-TTL Digital IO Module"
475 depends on MFD_JANZ_CMODIO
477 This enables support for the Janz VMOD-TTL Digital IO module.
478 This driver provides support for driving the pins in output
479 mode only. Input mode is not supported.
482 bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
483 depends on AB8500_CORE && BROKEN
485 Select this to enable the AB8500 IC GPIO driver
489 depends on MFD_TPS65910
491 Select this option to enable GPIO driver for the TPS65910