drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         select SLOW_WORK
  13         help
  14           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  15           introduced in XFree86 4.0. If you say Y here, you need to select
  16           the module that's right for your graphics card from the list below.
  17           These modules provide support for synchronization, security, and
  18           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  19           details.  You should also select and configure AGP
  20           (/dev/agpgart) support if it is available for your platform.
  21
  22 config DRM_KMS_HELPER
  23         tristate
  24         depends on DRM
  25         select FB
  26         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  27         help
  28           FB and CRTC helpers for KMS drivers.
  29
  30 config DRM_TTM
  31         tristate
  32         depends on DRM
  33         help
  34           GPU memory management subsystem for devices with multiple
  35           GPU memory types. Will be enabled automatically if a device driver
  36           uses it.
  37
  38 config DRM_TDFX
  39         tristate "3dfx Banshee/Voodoo3+"
  40         depends on DRM && PCI
  41         help
  42           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  43           graphics card.  If M is selected, the module will be called tdfx.
  44
  45 config DRM_R128
  46         tristate "ATI Rage 128"
  47         depends on DRM && PCI
  48         select FW_LOADER
  49         help
  50           Choose this option if you have an ATI Rage 128 graphics card.  If M
  51           is selected, the module will be called r128.  AGP support for
  52           this card is strongly suggested (unless you have a PCI version).
  53
  54 config DRM_RADEON
  55         tristate "ATI Radeon"
  56         depends on DRM && PCI
  57         select FB_CFB_FILLRECT
  58         select FB_CFB_COPYAREA
  59         select FB_CFB_IMAGEBLIT
  60         select FW_LOADER
  61         select DRM_KMS_HELPER
  62         select DRM_TTM
  63         select POWER_SUPPLY
  64         select HWMON
  65         help
  66           Choose this option if you have an ATI Radeon graphics card.  There
  67           are both PCI and AGP versions.  You don't need to choose this to
  68           run the Radeon in plain VGA mode.
  69
  70           If M is selected, the module will be called radeon.
  71
  72 source "drivers/gpu/drm/radeon/Kconfig"
  73
  74 config DRM_I810
  75         tristate "Intel I810"
  76         depends on DRM && AGP && AGP_INTEL
  77         help
  78           Choose this option if you have an Intel I810 graphics card.  If M is
  79           selected, the module will be called i810.  AGP support is required
  80           for this driver to work.
  81
  82 choice
  83         prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
  84         depends on DRM && AGP && AGP_INTEL
  85         optional
  86
  87 config DRM_I830
  88         tristate "i830 driver"
  89         help
  90           Choose this option if you have a system that has Intel 830M, 845G,
  91           852GM, 855GM or 865G integrated graphics.  If M is selected, the
  92           module will be called i830.  AGP support is required for this driver
  93           to work. This driver is used by the older X releases X.org 6.7 and
  94           XFree86 4.3. If unsure, build this and i915 as modules and the X server
  95           will load the correct one.
  96
  97 config DRM_I915
  98         tristate "i915 driver"
  99         depends on AGP_INTEL
 100         select SHMEM
 101         select DRM_KMS_HELPER
 102         select FB_CFB_FILLRECT
 103         select FB_CFB_COPYAREA
 104         select FB_CFB_IMAGEBLIT
 105         # i915 depends on ACPI_VIDEO when ACPI is enabled
 106         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
 107         select VIDEO_OUTPUT_CONTROL if ACPI
 108         select BACKLIGHT_CLASS_DEVICE if ACPI
 109         select INPUT if ACPI
 110         select ACPI_VIDEO if ACPI
 111         select ACPI_BUTTON if ACPI
 112         help
 113           Choose this option if you have a system that has Intel 830M, 845G,
 114           852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
 115           module will be called i915.  AGP support is required for this driver
 116           to work. This driver is used by the Intel driver in X.org 6.8 and
 117           XFree86 4.4 and above. If unsure, build this and i830 as modules and
 118           the X server will load the correct one.
 119
 120 config DRM_I915_KMS
 121         bool "Enable modesetting on intel by default"
 122         depends on DRM_I915
 123         help
 124           Choose this option if you want kernel modesetting enabled by default,
 125           and you have a new enough userspace to support this. Running old
 126           userspaces with this enabled will cause pain.  Note that this causes
 127           the driver to bind to PCI devices, which precludes loading things
 128           like intelfb.
 129
 130 endchoice
 131
 132 config DRM_MGA
 133         tristate "Matrox g200/g400"
 134         depends on DRM && PCI
 135         select FW_LOADER
 136         help
 137           Choose this option if you have a Matrox G200, G400 or G450 graphics
 138           card.  If M is selected, the module will be called mga.  AGP
 139           support is required for this driver to work.
 140
 141 config DRM_SIS
 142         tristate "SiS video cards"
 143         depends on DRM && AGP
 144         depends on FB_SIS || FB_SIS=n
 145         help
 146           Choose this option if you have a SiS 630 or compatible video
 147           chipset. If M is selected the module will be called sis. AGP
 148           support is required for this driver to work.
 149
 150 config DRM_VIA
 151         tristate "Via unichrome video cards"
 152         depends on DRM && PCI
 153         help
 154           Choose this option if you have a Via unichrome or compatible video
 155           chipset. If M is selected the module will be called via.
 156
 157 config DRM_SAVAGE
 158         tristate "Savage video cards"
 159         depends on DRM && PCI
 160         help
 161           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 162           chipset. If M is selected the module will be called savage.