drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select I2C
  12         select I2C_ALGOBIT
  13         select DMA_SHARED_BUFFER
  14         help
  15           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  16           introduced in XFree86 4.0. If you say Y here, you need to select
  17           the module that's right for your graphics card from the list below.
  18           These modules provide support for synchronization, security, and
  19           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  20           details.  You should also select and configure AGP
  21           (/dev/agpgart) support if it is available for your platform.
  22
  23 config DRM_MIPI_DSI
  24         bool
  25         depends on DRM
  26
  27 config DRM_USB
  28         tristate
  29         depends on DRM
  30         depends on USB_SUPPORT && USB_ARCH_HAS_HCD
  31         select USB
  32
  33 config DRM_KMS_HELPER
  34         tristate
  35         depends on DRM
  36         help
  37           CRTC helpers for KMS drivers.
  38
  39 config DRM_KMS_FB_HELPER
  40         bool
  41         depends on DRM_KMS_HELPER
  42         select FB
  43         select FRAMEBUFFER_CONSOLE if !EXPERT
  44         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  45         help
  46           FBDEV helpers for KMS drivers.
  47
  48 config DRM_LOAD_EDID_FIRMWARE
  49         bool "Allow to specify an EDID data set instead of probing for it"
  50         depends on DRM_KMS_HELPER
  51         help
  52           Say Y here, if you want to use EDID data to be loaded from the
  53           /lib/firmware directory or one of the provided built-in
  54           data sets. This may be necessary, if the graphics adapter or
  55           monitor are unable to provide appropriate EDID data. Since this
  56           feature is provided as a workaround for broken hardware, the
  57           default case is N. Details and instructions how to build your own
  58           EDID data are given in Documentation/EDID/HOWTO.txt.
  59
  60 config DRM_TTM
  61         tristate
  62         depends on DRM
  63         help
  64           GPU memory management subsystem for devices with multiple
  65           GPU memory types. Will be enabled automatically if a device driver
  66           uses it.
  67
  68 config DRM_GEM_CMA_HELPER
  69         bool
  70         depends on DRM
  71         help
  72           Choose this if you need the GEM CMA helper functions
  73
  74 config DRM_KMS_CMA_HELPER
  75         bool
  76         select DRM_GEM_CMA_HELPER
  77         select DRM_KMS_FB_HELPER
  78         select FB_SYS_FILLRECT
  79         select FB_SYS_COPYAREA
  80         select FB_SYS_IMAGEBLIT
  81         help
  82           Choose this if you need the KMS CMA helper functions
  83
  84 source "drivers/gpu/drm/i2c/Kconfig"
  85
  86 config DRM_TDFX
  87         tristate "3dfx Banshee/Voodoo3+"
  88         depends on DRM && PCI
  89         help
  90           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  91           graphics card.  If M is selected, the module will be called tdfx.
  92
  93 config DRM_R128
  94         tristate "ATI Rage 128"
  95         depends on DRM && PCI
  96         select FW_LOADER
  97         help
  98           Choose this option if you have an ATI Rage 128 graphics card.  If M
  99           is selected, the module will be called r128.  AGP support for
 100           this card is strongly suggested (unless you have a PCI version).
 101
 102 config DRM_RADEON
 103         tristate "ATI Radeon"
 104         depends on DRM && PCI
 105         select FB_CFB_FILLRECT
 106         select FB_CFB_COPYAREA
 107         select FB_CFB_IMAGEBLIT
 108         select FW_LOADER
 109         select DRM_KMS_HELPER
 110         select DRM_KMS_FB_HELPER
 111         select DRM_TTM
 112         select POWER_SUPPLY
 113         select HWMON
 114         select BACKLIGHT_CLASS_DEVICE
 115         help
 116           Choose this option if you have an ATI Radeon graphics card.  There
 117           are both PCI and AGP versions.  You don't need to choose this to
 118           run the Radeon in plain VGA mode.
 119
 120           If M is selected, the module will be called radeon.
 121
 122 source "drivers/gpu/drm/radeon/Kconfig"
 123
 124 source "drivers/gpu/drm/nouveau/Kconfig"
 125
 126 config DRM_I810
 127         tristate "Intel I810"
 128         # !PREEMPT because of missing ioctl locking
 129         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 130         help
 131           Choose this option if you have an Intel I810 graphics card.  If M is
 132           selected, the module will be called i810.  AGP support is required
 133           for this driver to work.
 134
 135 source "drivers/gpu/drm/i915/Kconfig"
 136
 137 config DRM_MGA
 138         tristate "Matrox g200/g400"
 139         depends on DRM && PCI
 140         select FW_LOADER
 141         help
 142           Choose this option if you have a Matrox G200, G400 or G450 graphics
 143           card.  If M is selected, the module will be called mga.  AGP
 144           support is required for this driver to work.
 145
 146 config DRM_SIS
 147         tristate "SiS video cards"
 148         depends on DRM && AGP
 149         depends on FB_SIS || FB_SIS=n
 150         help
 151           Choose this option if you have a SiS 630 or compatible video
 152           chipset. If M is selected the module will be called sis. AGP
 153           support is required for this driver to work.
 154
 155 config DRM_VIA
 156         tristate "Via unichrome video cards"
 157         depends on DRM && PCI
 158         help
 159           Choose this option if you have a Via unichrome or compatible video
 160           chipset. If M is selected the module will be called via.
 161
 162 config DRM_SAVAGE
 163         tristate "Savage video cards"
 164         depends on DRM && PCI
 165         help
 166           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 167           chipset. If M is selected the module will be called savage.
 168
 169 source "drivers/gpu/drm/exynos/Kconfig"
 170
 171 source "drivers/gpu/drm/vmwgfx/Kconfig"
 172
 173 source "drivers/gpu/drm/gma500/Kconfig"
 174
 175 source "drivers/gpu/drm/udl/Kconfig"
 176
 177 source "drivers/gpu/drm/ast/Kconfig"
 178
 179 source "drivers/gpu/drm/mgag200/Kconfig"
 180
 181 source "drivers/gpu/drm/cirrus/Kconfig"
 182
 183 source "drivers/gpu/drm/armada/Kconfig"
 184
 185 source "drivers/gpu/drm/rcar-du/Kconfig"
 186
 187 source "drivers/gpu/drm/shmobile/Kconfig"
 188
 189 source "drivers/gpu/drm/omapdrm/Kconfig"
 190
 191 source "drivers/gpu/drm/tilcdc/Kconfig"
 192
 193 source "drivers/gpu/drm/qxl/Kconfig"
 194
 195 source "drivers/gpu/drm/bochs/Kconfig"
 196
 197 source "drivers/gpu/drm/msm/Kconfig"
 198
 199 source "drivers/gpu/drm/tegra/Kconfig"
 200
 201 source "drivers/gpu/drm/panel/Kconfig"