drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         help
  13           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  14           introduced in XFree86 4.0. If you say Y here, you need to select
  15           the module that's right for your graphics card from the list below.
  16           These modules provide support for synchronization, security, and
  17           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  18           details.  You should also select and configure AGP
  19           (/dev/agpgart) support.
  20
  21 config DRM_TTM
  22         tristate
  23         depends on DRM
  24         help
  25           GPU memory management subsystem for devices with multiple
  26           GPU memory types. Will be enabled automatically if a device driver
  27           uses it.
  28
  29 config DRM_TDFX
  30         tristate "3dfx Banshee/Voodoo3+"
  31         depends on DRM && PCI
  32         help
  33           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  34           graphics card.  If M is selected, the module will be called tdfx.
  35
  36 config DRM_R128
  37         tristate "ATI Rage 128"
  38         depends on DRM && PCI
  39         select FW_LOADER
  40         help
  41           Choose this option if you have an ATI Rage 128 graphics card.  If M
  42           is selected, the module will be called r128.  AGP support for
  43           this card is strongly suggested (unless you have a PCI version).
  44
  45 config DRM_RADEON
  46         tristate "ATI Radeon"
  47         depends on DRM && PCI
  48         select FB_CFB_FILLRECT
  49         select FB_CFB_COPYAREA
  50         select FB_CFB_IMAGEBLIT
  51         select FB
  52         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  53         help
  54           Choose this option if you have an ATI Radeon graphics card.  There
  55           are both PCI and AGP versions.  You don't need to choose this to
  56           run the Radeon in plain VGA mode.
  57
  58           If M is selected, the module will be called radeon.
  59
  60 config DRM_I810
  61         tristate "Intel I810"
  62         depends on DRM && AGP && AGP_INTEL
  63         help
  64           Choose this option if you have an Intel I810 graphics card.  If M is
  65           selected, the module will be called i810.  AGP support is required
  66           for this driver to work.
  67
  68 choice
  69         prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
  70         depends on DRM && AGP && AGP_INTEL
  71         optional
  72
  73 config DRM_I830
  74         tristate "i830 driver"
  75         help
  76           Choose this option if you have a system that has Intel 830M, 845G,
  77           852GM, 855GM or 865G integrated graphics.  If M is selected, the
  78           module will be called i830.  AGP support is required for this driver
  79           to work. This driver is used by the older X releases X.org 6.7 and
  80           XFree86 4.3. If unsure, build this and i915 as modules and the X server
  81           will load the correct one.
  82
  83 config DRM_I915
  84         tristate "i915 driver"
  85         depends on AGP_INTEL
  86         select FB_CFB_FILLRECT
  87         select FB_CFB_COPYAREA
  88         select FB_CFB_IMAGEBLIT
  89         select FB
  90         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  91         # i915 depends on ACPI_VIDEO when ACPI is enabled
  92         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
  93         select VIDEO_OUTPUT_CONTROL if ACPI
  94         select BACKLIGHT_CLASS_DEVICE if ACPI
  95         select INPUT if ACPI
  96         select ACPI_VIDEO if ACPI
  97         help
  98           Choose this option if you have a system that has Intel 830M, 845G,
  99           852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
 100           module will be called i915.  AGP support is required for this driver
 101           to work. This driver is used by the Intel driver in X.org 6.8 and
 102           XFree86 4.4 and above. If unsure, build this and i830 as modules and
 103           the X server will load the correct one.
 104
 105 config DRM_I915_KMS
 106         bool "Enable modesetting on intel by default"
 107         depends on DRM_I915
 108         help
 109           Choose this option if you want kernel modesetting enabled by default,
 110           and you have a new enough userspace to support this. Running old
 111           userspaces with this enabled will cause pain.  Note that this causes
 112           the driver to bind to PCI devices, which precludes loading things
 113           like intelfb.
 114
 115 endchoice
 116
 117 config DRM_MGA
 118         tristate "Matrox g200/g400"
 119         depends on DRM
 120         select FW_LOADER
 121         help
 122           Choose this option if you have a Matrox G200, G400 or G450 graphics
 123           card.  If M is selected, the module will be called mga.  AGP
 124           support is required for this driver to work.
 125
 126 config DRM_SIS
 127         tristate "SiS video cards"
 128         depends on DRM && AGP
 129         depends on FB_SIS || FB_SIS=n
 130         help
 131           Choose this option if you have a SiS 630 or compatible video
 132           chipset. If M is selected the module will be called sis. AGP
 133           support is required for this driver to work.
 134
 135 config DRM_VIA
 136         tristate "Via unichrome video cards"
 137         depends on DRM
 138         help
 139           Choose this option if you have a Via unichrome or compatible video
 140           chipset. If M is selected the module will be called via.
 141
 142 config DRM_SAVAGE
 143         tristate "Savage video cards"
 144         depends on DRM
 145         help
 146           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 147           chipset. If M is selected the module will be called savage.