drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         help
  13           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  14           introduced in XFree86 4.0. If you say Y here, you need to select
  15           the module that's right for your graphics card from the list below.
  16           These modules provide support for synchronization, security, and
  17           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  18           details.  You should also select and configure AGP
  19           (/dev/agpgart) support.
  20
  21 config DRM_TTM
  22         tristate
  23         depends on DRM
  24         help
  25           GPU memory management subsystem for devices with multiple
  26           GPU memory types. Will be enabled automatically if a device driver
  27           uses it.
  28
  29 config DRM_TDFX
  30         tristate "3dfx Banshee/Voodoo3+"
  31         depends on DRM && PCI
  32         help
  33           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  34           graphics card.  If M is selected, the module will be called tdfx.
  35
  36 config DRM_R128
  37         tristate "ATI Rage 128"
  38         depends on DRM && PCI
  39         select FW_LOADER
  40         help
  41           Choose this option if you have an ATI Rage 128 graphics card.  If M
  42           is selected, the module will be called r128.  AGP support for
  43           this card is strongly suggested (unless you have a PCI version).
  44
  45 config DRM_RADEON
  46         tristate "ATI Radeon"
  47         depends on DRM && PCI
  48         select FB_CFB_FILLRECT
  49         select FB_CFB_COPYAREA
  50         select FB_CFB_IMAGEBLIT
  51         select FB
  52         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  53         select FW_LOADER
  54         help
  55           Choose this option if you have an ATI Radeon graphics card.  There
  56           are both PCI and AGP versions.  You don't need to choose this to
  57           run the Radeon in plain VGA mode.
  58
  59           If M is selected, the module will be called radeon.
  60
  61 config DRM_I810
  62         tristate "Intel I810"
  63         depends on DRM && AGP && AGP_INTEL
  64         help
  65           Choose this option if you have an Intel I810 graphics card.  If M is
  66           selected, the module will be called i810.  AGP support is required
  67           for this driver to work.
  68
  69 choice
  70         prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
  71         depends on DRM && AGP && AGP_INTEL
  72         optional
  73
  74 config DRM_I830
  75         tristate "i830 driver"
  76         help
  77           Choose this option if you have a system that has Intel 830M, 845G,
  78           852GM, 855GM or 865G integrated graphics.  If M is selected, the
  79           module will be called i830.  AGP support is required for this driver
  80           to work. This driver is used by the older X releases X.org 6.7 and
  81           XFree86 4.3. If unsure, build this and i915 as modules and the X server
  82           will load the correct one.
  83
  84 config DRM_I915
  85         tristate "i915 driver"
  86         depends on AGP_INTEL
  87         select FB_CFB_FILLRECT
  88         select FB_CFB_COPYAREA
  89         select FB_CFB_IMAGEBLIT
  90         select FB
  91         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  92         # i915 depends on ACPI_VIDEO when ACPI is enabled
  93         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
  94         select VIDEO_OUTPUT_CONTROL if ACPI
  95         select BACKLIGHT_CLASS_DEVICE if ACPI
  96         select INPUT if ACPI
  97         select ACPI_VIDEO if ACPI
  98         help
  99           Choose this option if you have a system that has Intel 830M, 845G,
 100           852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
 101           module will be called i915.  AGP support is required for this driver
 102           to work. This driver is used by the Intel driver in X.org 6.8 and
 103           XFree86 4.4 and above. If unsure, build this and i830 as modules and
 104           the X server will load the correct one.
 105
 106 config DRM_I915_KMS
 107         bool "Enable modesetting on intel by default"
 108         depends on DRM_I915
 109         help
 110           Choose this option if you want kernel modesetting enabled by default,
 111           and you have a new enough userspace to support this. Running old
 112           userspaces with this enabled will cause pain.  Note that this causes
 113           the driver to bind to PCI devices, which precludes loading things
 114           like intelfb.
 115
 116 endchoice
 117
 118 config DRM_MGA
 119         tristate "Matrox g200/g400"
 120         depends on DRM
 121         select FW_LOADER
 122         help
 123           Choose this option if you have a Matrox G200, G400 or G450 graphics
 124           card.  If M is selected, the module will be called mga.  AGP
 125           support is required for this driver to work.
 126
 127 config DRM_SIS
 128         tristate "SiS video cards"
 129         depends on DRM && AGP
 130         depends on FB_SIS || FB_SIS=n
 131         help
 132           Choose this option if you have a SiS 630 or compatible video
 133           chipset. If M is selected the module will be called sis. AGP
 134           support is required for this driver to work.
 135
 136 config DRM_VIA
 137         tristate "Via unichrome video cards"
 138         depends on DRM
 139         help
 140           Choose this option if you have a Via unichrome or compatible video
 141           chipset. If M is selected the module will be called via.
 142
 143 config DRM_SAVAGE
 144         tristate "Savage video cards"
 145         depends on DRM
 146         help
 147           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 148           chipset. If M is selected the module will be called savage.