drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select FB_CMDLINE
  12         select I2C
  13         select I2C_ALGOBIT
  14         select DMA_SHARED_BUFFER
  15         help
  16           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  17           introduced in XFree86 4.0. If you say Y here, you need to select
  18           the module that's right for your graphics card from the list below.
  19           These modules provide support for synchronization, security, and
  20           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  21           details.  You should also select and configure AGP
  22           (/dev/agpgart) support if it is available for your platform.
  23
  24 config DRM_MIPI_DSI
  25         bool
  26         depends on DRM
  27
  28 config DRM_DP_AUX_CHARDEV
  29         bool "DRM DP AUX Interface"
  30         depends on DRM
  31         help
  32           Choose this option to enable a /dev/drm_dp_auxN node that allows to
  33           read and write values to arbitrary DPCD registers on the DP aux
  34           channel.
  35
  36 config DRM_KMS_HELPER
  37         tristate
  38         depends on DRM
  39         help
  40           CRTC helpers for KMS drivers.
  41
  42 config DRM_KMS_FB_HELPER
  43         bool
  44         depends on DRM_KMS_HELPER
  45         select FB
  46         select FRAMEBUFFER_CONSOLE if !EXPERT
  47         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  48         select FB_SYS_FOPS
  49         select FB_SYS_FILLRECT
  50         select FB_SYS_COPYAREA
  51         select FB_SYS_IMAGEBLIT
  52         select FB_CFB_FILLRECT
  53         select FB_CFB_COPYAREA
  54         select FB_CFB_IMAGEBLIT
  55         help
  56           FBDEV helpers for KMS drivers.
  57
  58 config DRM_FBDEV_EMULATION
  59         bool "Enable legacy fbdev support for your modesetting driver"
  60         depends on DRM
  61         select DRM_KMS_HELPER
  62         select DRM_KMS_FB_HELPER
  63         default y
  64         help
  65           Choose this option if you have a need for the legacy fbdev
  66           support. Note that this support also provides the linux console
  67           support on top of your modesetting driver.
  68
  69           If in doubt, say "Y".
  70
  71 config DRM_LOAD_EDID_FIRMWARE
  72         bool "Allow to specify an EDID data set instead of probing for it"
  73         depends on DRM_KMS_HELPER
  74         help
  75           Say Y here, if you want to use EDID data to be loaded from the
  76           /lib/firmware directory or one of the provided built-in
  77           data sets. This may be necessary, if the graphics adapter or
  78           monitor are unable to provide appropriate EDID data. Since this
  79           feature is provided as a workaround for broken hardware, the
  80           default case is N. Details and instructions how to build your own
  81           EDID data are given in Documentation/EDID/HOWTO.txt.
  82
  83 config DRM_TTM
  84         tristate
  85         depends on DRM
  86         help
  87           GPU memory management subsystem for devices with multiple
  88           GPU memory types. Will be enabled automatically if a device driver
  89           uses it.
  90
  91 config DRM_GEM_CMA_HELPER
  92         bool
  93         depends on DRM
  94         help
  95           Choose this if you need the GEM CMA helper functions
  96
  97 config DRM_KMS_CMA_HELPER
  98         bool
  99         depends on DRM
 100         select DRM_GEM_CMA_HELPER
 101         select DRM_KMS_FB_HELPER
 102         select FB_SYS_FILLRECT
 103         select FB_SYS_COPYAREA
 104         select FB_SYS_IMAGEBLIT
 105         help
 106           Choose this if you need the KMS CMA helper functions
 107
 108 source "drivers/gpu/drm/i2c/Kconfig"
 109
 110 config DRM_TDFX
 111         tristate "3dfx Banshee/Voodoo3+"
 112         depends on DRM && PCI
 113         help
 114           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 115           graphics card.  If M is selected, the module will be called tdfx.
 116
 117 source "drivers/gpu/drm/arm/Kconfig"
 118
 119 config DRM_R128
 120         tristate "ATI Rage 128"
 121         depends on DRM && PCI
 122         select FW_LOADER
 123         help
 124           Choose this option if you have an ATI Rage 128 graphics card.  If M
 125           is selected, the module will be called r128.  AGP support for
 126           this card is strongly suggested (unless you have a PCI version).
 127
 128 config DRM_RADEON
 129         tristate "ATI Radeon"
 130         depends on DRM && PCI
 131         select FB_CFB_FILLRECT
 132         select FB_CFB_COPYAREA
 133         select FB_CFB_IMAGEBLIT
 134         select FW_LOADER
 135         select DRM_KMS_HELPER
 136         select DRM_KMS_FB_HELPER
 137         select DRM_TTM
 138         select POWER_SUPPLY
 139         select HWMON
 140         select BACKLIGHT_CLASS_DEVICE
 141         select BACKLIGHT_LCD_SUPPORT
 142         select INTERVAL_TREE
 143         help
 144           Choose this option if you have an ATI Radeon graphics card.  There
 145           are both PCI and AGP versions.  You don't need to choose this to
 146           run the Radeon in plain VGA mode.
 147
 148           If M is selected, the module will be called radeon.
 149
 150 source "drivers/gpu/drm/radeon/Kconfig"
 151
 152 config DRM_AMDGPU
 153         tristate "AMD GPU"
 154         depends on DRM && PCI
 155         select FB_CFB_FILLRECT
 156         select FB_CFB_COPYAREA
 157         select FB_CFB_IMAGEBLIT
 158         select FW_LOADER
 159         select DRM_KMS_HELPER
 160         select DRM_KMS_FB_HELPER
 161         select DRM_TTM
 162         select POWER_SUPPLY
 163         select HWMON
 164         select BACKLIGHT_CLASS_DEVICE
 165         select BACKLIGHT_LCD_SUPPORT
 166         select INTERVAL_TREE
 167         help
 168           Choose this option if you have a recent AMD Radeon graphics card.
 169
 170           If M is selected, the module will be called amdgpu.
 171
 172 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
 173 source "drivers/gpu/drm/amd/powerplay/Kconfig"
 174
 175 source "drivers/gpu/drm/amd/acp/Kconfig"
 176
 177 source "drivers/gpu/drm/nouveau/Kconfig"
 178
 179 config DRM_I810
 180         tristate "Intel I810"
 181         # !PREEMPT because of missing ioctl locking
 182         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 183         help
 184           Choose this option if you have an Intel I810 graphics card.  If M is
 185           selected, the module will be called i810.  AGP support is required
 186           for this driver to work.
 187
 188 source "drivers/gpu/drm/i915/Kconfig"
 189
 190 config DRM_MGA
 191         tristate "Matrox g200/g400"
 192         depends on DRM && PCI
 193         select FW_LOADER
 194         help
 195           Choose this option if you have a Matrox G200, G400 or G450 graphics
 196           card.  If M is selected, the module will be called mga.  AGP
 197           support is required for this driver to work.
 198
 199 config DRM_SIS
 200         tristate "SiS video cards"
 201         depends on DRM && AGP
 202         depends on FB_SIS || FB_SIS=n
 203         help
 204           Choose this option if you have a SiS 630 or compatible video
 205           chipset. If M is selected the module will be called sis. AGP
 206           support is required for this driver to work.
 207
 208 config DRM_VIA
 209         tristate "Via unichrome video cards"
 210         depends on DRM && PCI
 211         help
 212           Choose this option if you have a Via unichrome or compatible video
 213           chipset. If M is selected the module will be called via.
 214
 215 config DRM_SAVAGE
 216         tristate "Savage video cards"
 217         depends on DRM && PCI
 218         help
 219           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 220           chipset. If M is selected the module will be called savage.
 221
 222 config DRM_VGEM
 223         tristate "Virtual GEM provider"
 224         depends on DRM
 225         help
 226           Choose this option to get a virtual graphics memory manager,
 227           as used by Mesa's software renderer for enhanced performance.
 228           If M is selected the module will be called vgem.
 229
 230
 231 source "drivers/gpu/drm/exynos/Kconfig"
 232
 233 source "drivers/gpu/drm/rockchip/Kconfig"
 234
 235 source "drivers/gpu/drm/vmwgfx/Kconfig"
 236
 237 source "drivers/gpu/drm/gma500/Kconfig"
 238
 239 source "drivers/gpu/drm/udl/Kconfig"
 240
 241 source "drivers/gpu/drm/ast/Kconfig"
 242
 243 source "drivers/gpu/drm/mgag200/Kconfig"
 244
 245 source "drivers/gpu/drm/cirrus/Kconfig"
 246
 247 source "drivers/gpu/drm/armada/Kconfig"
 248
 249 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
 250
 251 source "drivers/gpu/drm/rcar-du/Kconfig"
 252
 253 source "drivers/gpu/drm/shmobile/Kconfig"
 254
 255 source "drivers/gpu/drm/omapdrm/Kconfig"
 256
 257 source "drivers/gpu/drm/tilcdc/Kconfig"
 258
 259 source "drivers/gpu/drm/qxl/Kconfig"
 260
 261 source "drivers/gpu/drm/bochs/Kconfig"
 262
 263 source "drivers/gpu/drm/virtio/Kconfig"
 264
 265 source "drivers/gpu/drm/msm/Kconfig"
 266
 267 source "drivers/gpu/drm/fsl-dcu/Kconfig"
 268
 269 source "drivers/gpu/drm/tegra/Kconfig"
 270
 271 source "drivers/gpu/drm/panel/Kconfig"
 272
 273 source "drivers/gpu/drm/bridge/Kconfig"
 274
 275 source "drivers/gpu/drm/sti/Kconfig"
 276
 277 source "drivers/gpu/drm/amd/amdkfd/Kconfig"
 278
 279 source "drivers/gpu/drm/imx/Kconfig"
 280
 281 source "drivers/gpu/drm/vc4/Kconfig"
 282
 283 source "drivers/gpu/drm/etnaviv/Kconfig"