drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         help
  13           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  14           introduced in XFree86 4.0. If you say Y here, you need to select
  15           the module that's right for your graphics card from the list below.
  16           These modules provide support for synchronization, security, and
  17           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  18           details.  You should also select and configure AGP
  19           (/dev/agpgart) support.
  20
  21 config DRM_TDFX
  22         tristate "3dfx Banshee/Voodoo3+"
  23         depends on DRM && PCI
  24         help
  25           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  26           graphics card.  If M is selected, the module will be called tdfx.
  27
  28 config DRM_R128
  29         tristate "ATI Rage 128"
  30         depends on DRM && PCI
  31         help
  32           Choose this option if you have an ATI Rage 128 graphics card.  If M
  33           is selected, the module will be called r128.  AGP support for
  34           this card is strongly suggested (unless you have a PCI version).
  35
  36 config DRM_RADEON
  37         tristate "ATI Radeon"
  38         depends on DRM && PCI
  39         help
  40           Choose this option if you have an ATI Radeon graphics card.  There
  41           are both PCI and AGP versions.  You don't need to choose this to
  42           run the Radeon in plain VGA mode.
  43
  44           If M is selected, the module will be called radeon.
  45
  46 config DRM_I810
  47         tristate "Intel I810"
  48         depends on DRM && AGP && AGP_INTEL
  49         help
  50           Choose this option if you have an Intel I810 graphics card.  If M is
  51           selected, the module will be called i810.  AGP support is required
  52           for this driver to work.
  53
  54 choice
  55         prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
  56         depends on DRM && AGP && AGP_INTEL
  57         optional
  58
  59 config DRM_I830
  60         tristate "i830 driver"
  61         help
  62           Choose this option if you have a system that has Intel 830M, 845G,
  63           852GM, 855GM or 865G integrated graphics.  If M is selected, the
  64           module will be called i830.  AGP support is required for this driver
  65           to work. This driver is used by the older X releases X.org 6.7 and
  66           XFree86 4.3. If unsure, build this and i915 as modules and the X server
  67           will load the correct one.
  68
  69 config DRM_I915
  70         tristate "i915 driver"
  71         select FB_CFB_FILLRECT
  72         select FB_CFB_COPYAREA
  73         select FB_CFB_IMAGEBLIT
  74         select FB
  75         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  76         # i915 depends on ACPI_VIDEO when ACPI is enabled
  77         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
  78         select VIDEO_OUTPUT_CONTROL if ACPI
  79         select BACKLIGHT_CLASS_DEVICE if ACPI
  80         select INPUT if ACPI
  81         select ACPI_VIDEO if ACPI
  82         help
  83           Choose this option if you have a system that has Intel 830M, 845G,
  84           852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
  85           module will be called i915.  AGP support is required for this driver
  86           to work. This driver is used by the Intel driver in X.org 6.8 and
  87           XFree86 4.4 and above. If unsure, build this and i830 as modules and
  88           the X server will load the correct one.
  89
  90 config DRM_I915_KMS
  91         bool "Enable modesetting on intel by default"
  92         depends on DRM_I915
  93         help
  94           Choose this option if you want kernel modesetting enabled by default,
  95           and you have a new enough userspace to support this. Running old
  96           userspaces with this enabled will cause pain.  Note that this causes
  97           the driver to bind to PCI devices, which precludes loading things
  98           like intelfb.
  99
 100 endchoice
 101
 102 config DRM_MGA
 103         tristate "Matrox g200/g400"
 104         depends on DRM
 105         help
 106           Choose this option if you have a Matrox G200, G400 or G450 graphics
 107           card.  If M is selected, the module will be called mga.  AGP
 108           support is required for this driver to work.
 109
 110 config DRM_SIS
 111         tristate "SiS video cards"
 112         depends on DRM && AGP
 113         depends on FB_SIS || FB_SIS=n
 114         help
 115           Choose this option if you have a SiS 630 or compatible video
 116           chipset. If M is selected the module will be called sis. AGP
 117           support is required for this driver to work.
 118
 119 config DRM_VIA
 120         tristate "Via unichrome video cards"
 121         depends on DRM
 122         help
 123           Choose this option if you have a Via unichrome or compatible video
 124           chipset. If M is selected the module will be called via.
 125
 126 config DRM_SAVAGE
 127         tristate "Savage video cards"
 128         depends on DRM
 129         help
 130           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 131           chipset. If M is selected the module will be called savage.