drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select FB_CMDLINE
  12         select I2C
  13         select I2C_ALGOBIT
  14         select DMA_SHARED_BUFFER
  15         help
  16           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  17           introduced in XFree86 4.0. If you say Y here, you need to select
  18           the module that's right for your graphics card from the list below.
  19           These modules provide support for synchronization, security, and
  20           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  21           details.  You should also select and configure AGP
  22           (/dev/agpgart) support if it is available for your platform.
  23
  24 config DRM_MIPI_DSI
  25         bool
  26         depends on DRM
  27
  28 config DRM_DP_AUX_CHARDEV
  29         bool "DRM DP AUX Interface"
  30         depends on DRM
  31         help
  32           Choose this option to enable a /dev/drm_dp_auxN node that allows to
  33           read and write values to arbitrary DPCD registers on the DP aux
  34           channel.
  35
  36 config DRM_KMS_HELPER
  37         tristate
  38         depends on DRM
  39         help
  40           CRTC helpers for KMS drivers.
  41
  42 config DRM_KMS_FB_HELPER
  43         bool
  44         depends on DRM_KMS_HELPER
  45         select FB
  46         select FRAMEBUFFER_CONSOLE if !EXPERT
  47         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  48         select FB_SYS_FOPS
  49         select FB_SYS_FILLRECT
  50         select FB_SYS_COPYAREA
  51         select FB_SYS_IMAGEBLIT
  52         select FB_CFB_FILLRECT
  53         select FB_CFB_COPYAREA
  54         select FB_CFB_IMAGEBLIT
  55         select FB_DEFERRED_IO
  56         help
  57           FBDEV helpers for KMS drivers.
  58
  59 config DRM_FBDEV_EMULATION
  60         bool "Enable legacy fbdev support for your modesetting driver"
  61         depends on DRM
  62         select DRM_KMS_HELPER
  63         select DRM_KMS_FB_HELPER
  64         default y
  65         help
  66           Choose this option if you have a need for the legacy fbdev
  67           support. Note that this support also provides the linux console
  68           support on top of your modesetting driver.
  69
  70           If in doubt, say "Y".
  71
  72 config DRM_LOAD_EDID_FIRMWARE
  73         bool "Allow to specify an EDID data set instead of probing for it"
  74         depends on DRM_KMS_HELPER
  75         help
  76           Say Y here, if you want to use EDID data to be loaded from the
  77           /lib/firmware directory or one of the provided built-in
  78           data sets. This may be necessary, if the graphics adapter or
  79           monitor are unable to provide appropriate EDID data. Since this
  80           feature is provided as a workaround for broken hardware, the
  81           default case is N. Details and instructions how to build your own
  82           EDID data are given in Documentation/EDID/HOWTO.txt.
  83
  84 config DRM_TTM
  85         tristate
  86         depends on DRM
  87         help
  88           GPU memory management subsystem for devices with multiple
  89           GPU memory types. Will be enabled automatically if a device driver
  90           uses it.
  91
  92 config DRM_GEM_CMA_HELPER
  93         bool
  94         depends on DRM
  95         help
  96           Choose this if you need the GEM CMA helper functions
  97
  98 config DRM_KMS_CMA_HELPER
  99         bool
 100         depends on DRM
 101         select DRM_GEM_CMA_HELPER
 102         select DRM_KMS_FB_HELPER
 103         select FB_SYS_FILLRECT
 104         select FB_SYS_COPYAREA
 105         select FB_SYS_IMAGEBLIT
 106         help
 107           Choose this if you need the KMS CMA helper functions
 108
 109 source "drivers/gpu/drm/i2c/Kconfig"
 110
 111 config DRM_TDFX
 112         tristate "3dfx Banshee/Voodoo3+"
 113         depends on DRM && PCI
 114         help
 115           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 116           graphics card.  If M is selected, the module will be called tdfx.
 117
 118 source "drivers/gpu/drm/arm/Kconfig"
 119
 120 config DRM_R128
 121         tristate "ATI Rage 128"
 122         depends on DRM && PCI
 123         select FW_LOADER
 124         help
 125           Choose this option if you have an ATI Rage 128 graphics card.  If M
 126           is selected, the module will be called r128.  AGP support for
 127           this card is strongly suggested (unless you have a PCI version).
 128
 129 config DRM_RADEON
 130         tristate "ATI Radeon"
 131         depends on DRM && PCI
 132         select FW_LOADER
 133         select DRM_KMS_HELPER
 134         select DRM_TTM
 135         select POWER_SUPPLY
 136         select HWMON
 137         select BACKLIGHT_CLASS_DEVICE
 138         select BACKLIGHT_LCD_SUPPORT
 139         select INTERVAL_TREE
 140         help
 141           Choose this option if you have an ATI Radeon graphics card.  There
 142           are both PCI and AGP versions.  You don't need to choose this to
 143           run the Radeon in plain VGA mode.
 144
 145           If M is selected, the module will be called radeon.
 146
 147 source "drivers/gpu/drm/radeon/Kconfig"
 148
 149 config DRM_AMDGPU
 150         tristate "AMD GPU"
 151         depends on DRM && PCI
 152         select FW_LOADER
 153         select DRM_KMS_HELPER
 154         select DRM_TTM
 155         select POWER_SUPPLY
 156         select HWMON
 157         select BACKLIGHT_CLASS_DEVICE
 158         select BACKLIGHT_LCD_SUPPORT
 159         select INTERVAL_TREE
 160         help
 161           Choose this option if you have a recent AMD Radeon graphics card.
 162
 163           If M is selected, the module will be called amdgpu.
 164
 165 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
 166 source "drivers/gpu/drm/amd/powerplay/Kconfig"
 167
 168 source "drivers/gpu/drm/amd/acp/Kconfig"
 169
 170 source "drivers/gpu/drm/nouveau/Kconfig"
 171
 172 config DRM_I810
 173         tristate "Intel I810"
 174         # !PREEMPT because of missing ioctl locking
 175         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 176         help
 177           Choose this option if you have an Intel I810 graphics card.  If M is
 178           selected, the module will be called i810.  AGP support is required
 179           for this driver to work.
 180
 181 source "drivers/gpu/drm/i915/Kconfig"
 182
 183 config DRM_MGA
 184         tristate "Matrox g200/g400"
 185         depends on DRM && PCI
 186         select FW_LOADER
 187         help
 188           Choose this option if you have a Matrox G200, G400 or G450 graphics
 189           card.  If M is selected, the module will be called mga.  AGP
 190           support is required for this driver to work.
 191
 192 config DRM_SIS
 193         tristate "SiS video cards"
 194         depends on DRM && AGP
 195         depends on FB_SIS || FB_SIS=n
 196         help
 197           Choose this option if you have a SiS 630 or compatible video
 198           chipset. If M is selected the module will be called sis. AGP
 199           support is required for this driver to work.
 200
 201 config DRM_VIA
 202         tristate "Via unichrome video cards"
 203         depends on DRM && PCI
 204         help
 205           Choose this option if you have a Via unichrome or compatible video
 206           chipset. If M is selected the module will be called via.
 207
 208 config DRM_SAVAGE
 209         tristate "Savage video cards"
 210         depends on DRM && PCI
 211         help
 212           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 213           chipset. If M is selected the module will be called savage.
 214
 215 config DRM_VGEM
 216         tristate "Virtual GEM provider"
 217         depends on DRM
 218         help
 219           Choose this option to get a virtual graphics memory manager,
 220           as used by Mesa's software renderer for enhanced performance.
 221           If M is selected the module will be called vgem.
 222
 223
 224 source "drivers/gpu/drm/exynos/Kconfig"
 225
 226 source "drivers/gpu/drm/rockchip/Kconfig"
 227
 228 source "drivers/gpu/drm/vmwgfx/Kconfig"
 229
 230 source "drivers/gpu/drm/gma500/Kconfig"
 231
 232 source "drivers/gpu/drm/udl/Kconfig"
 233
 234 source "drivers/gpu/drm/ast/Kconfig"
 235
 236 source "drivers/gpu/drm/mgag200/Kconfig"
 237
 238 source "drivers/gpu/drm/cirrus/Kconfig"
 239
 240 source "drivers/gpu/drm/armada/Kconfig"
 241
 242 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
 243
 244 source "drivers/gpu/drm/rcar-du/Kconfig"
 245
 246 source "drivers/gpu/drm/shmobile/Kconfig"
 247
 248 source "drivers/gpu/drm/sun4i/Kconfig"
 249
 250 source "drivers/gpu/drm/omapdrm/Kconfig"
 251
 252 source "drivers/gpu/drm/tilcdc/Kconfig"
 253
 254 source "drivers/gpu/drm/qxl/Kconfig"
 255
 256 source "drivers/gpu/drm/bochs/Kconfig"
 257
 258 source "drivers/gpu/drm/virtio/Kconfig"
 259
 260 source "drivers/gpu/drm/msm/Kconfig"
 261
 262 source "drivers/gpu/drm/fsl-dcu/Kconfig"
 263
 264 source "drivers/gpu/drm/tegra/Kconfig"
 265
 266 source "drivers/gpu/drm/panel/Kconfig"
 267
 268 source "drivers/gpu/drm/bridge/Kconfig"
 269
 270 source "drivers/gpu/drm/sti/Kconfig"
 271
 272 source "drivers/gpu/drm/amd/amdkfd/Kconfig"
 273
 274 source "drivers/gpu/drm/imx/Kconfig"
 275
 276 source "drivers/gpu/drm/vc4/Kconfig"
 277
 278 source "drivers/gpu/drm/etnaviv/Kconfig"
 279
 280 source "drivers/gpu/drm/arc/Kconfig"
 281
 282 source "drivers/gpu/drm/hisilicon/Kconfig"
 283
 284 source "drivers/gpu/drm/mediatek/Kconfig"