drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         help
  13           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  14           introduced in XFree86 4.0. If you say Y here, you need to select
  15           the module that's right for your graphics card from the list below.
  16           These modules provide support for synchronization, security, and
  17           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  18           details.  You should also select and configure AGP
  19           (/dev/agpgart) support.
  20
  21 config DRM_TTM
  22         tristate
  23         depends on DRM
  24         help
  25           GPU memory management subsystem for devices with multiple
  26           GPU memory types. Will be enabled automatically if a device driver
  27           uses it.
  28
  29 config DRM_TDFX
  30         tristate "3dfx Banshee/Voodoo3+"
  31         depends on DRM && PCI
  32         help
  33           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  34           graphics card.  If M is selected, the module will be called tdfx.
  35
  36 config DRM_R128
  37         tristate "ATI Rage 128"
  38         depends on DRM && PCI
  39         help
  40           Choose this option if you have an ATI Rage 128 graphics card.  If M
  41           is selected, the module will be called r128.  AGP support for
  42           this card is strongly suggested (unless you have a PCI version).
  43
  44 config DRM_RADEON
  45         tristate "ATI Radeon"
  46         depends on DRM && PCI
  47         select FB_CFB_FILLRECT
  48         select FB_CFB_COPYAREA
  49         select FB_CFB_IMAGEBLIT
  50         select FB
  51         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  52         help
  53           Choose this option if you have an ATI Radeon graphics card.  There
  54           are both PCI and AGP versions.  You don't need to choose this to
  55           run the Radeon in plain VGA mode.
  56
  57           If M is selected, the module will be called radeon.
  58
  59 config DRM_I810
  60         tristate "Intel I810"
  61         depends on DRM && AGP && AGP_INTEL
  62         help
  63           Choose this option if you have an Intel I810 graphics card.  If M is
  64           selected, the module will be called i810.  AGP support is required
  65           for this driver to work.
  66
  67 choice
  68         prompt "Intel 830M, 845G, 852GM, 855GM, 865G"
  69         depends on DRM && AGP && AGP_INTEL
  70         optional
  71
  72 config DRM_I830
  73         tristate "i830 driver"
  74         help
  75           Choose this option if you have a system that has Intel 830M, 845G,
  76           852GM, 855GM or 865G integrated graphics.  If M is selected, the
  77           module will be called i830.  AGP support is required for this driver
  78           to work. This driver is used by the older X releases X.org 6.7 and
  79           XFree86 4.3. If unsure, build this and i915 as modules and the X server
  80           will load the correct one.
  81
  82 config DRM_I915
  83         tristate "i915 driver"
  84         select FB_CFB_FILLRECT
  85         select FB_CFB_COPYAREA
  86         select FB_CFB_IMAGEBLIT
  87         select FB
  88         select FRAMEBUFFER_CONSOLE if !EMBEDDED
  89         # i915 depends on ACPI_VIDEO when ACPI is enabled
  90         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
  91         select VIDEO_OUTPUT_CONTROL if ACPI
  92         select BACKLIGHT_CLASS_DEVICE if ACPI
  93         select INPUT if ACPI
  94         select ACPI_VIDEO if ACPI
  95         help
  96           Choose this option if you have a system that has Intel 830M, 845G,
  97           852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
  98           module will be called i915.  AGP support is required for this driver
  99           to work. This driver is used by the Intel driver in X.org 6.8 and
 100           XFree86 4.4 and above. If unsure, build this and i830 as modules and
 101           the X server will load the correct one.
 102
 103 config DRM_I915_KMS
 104         bool "Enable modesetting on intel by default"
 105         depends on DRM_I915
 106         help
 107           Choose this option if you want kernel modesetting enabled by default,
 108           and you have a new enough userspace to support this. Running old
 109           userspaces with this enabled will cause pain.  Note that this causes
 110           the driver to bind to PCI devices, which precludes loading things
 111           like intelfb.
 112
 113 endchoice
 114
 115 config DRM_MGA
 116         tristate "Matrox g200/g400"
 117         depends on DRM
 118         help
 119           Choose this option if you have a Matrox G200, G400 or G450 graphics
 120           card.  If M is selected, the module will be called mga.  AGP
 121           support is required for this driver to work.
 122
 123 config DRM_SIS
 124         tristate "SiS video cards"
 125         depends on DRM && AGP
 126         depends on FB_SIS || FB_SIS=n
 127         help
 128           Choose this option if you have a SiS 630 or compatible video
 129           chipset. If M is selected the module will be called sis. AGP
 130           support is required for this driver to work.
 131
 132 config DRM_VIA
 133         tristate "Via unichrome video cards"
 134         depends on DRM
 135         help
 136           Choose this option if you have a Via unichrome or compatible video
 137           chipset. If M is selected the module will be called via.
 138
 139 config DRM_SAVAGE
 140         tristate "Savage video cards"
 141         depends on DRM
 142         help
 143           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 144           chipset. If M is selected the module will be called savage.