drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select FB_CMDLINE
  12         select I2C
  13         select I2C_ALGOBIT
  14         select DMA_SHARED_BUFFER
  15         help
  16           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  17           introduced in XFree86 4.0. If you say Y here, you need to select
  18           the module that's right for your graphics card from the list below.
  19           These modules provide support for synchronization, security, and
  20           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  21           details.  You should also select and configure AGP
  22           (/dev/agpgart) support if it is available for your platform.
  23
  24 config DRM_MIPI_DSI
  25         bool
  26         depends on DRM
  27
  28 config DRM_KMS_HELPER
  29         tristate
  30         depends on DRM
  31         help
  32           CRTC helpers for KMS drivers.
  33
  34 config DRM_KMS_FB_HELPER
  35         bool
  36         depends on DRM_KMS_HELPER
  37         select FB
  38         select FRAMEBUFFER_CONSOLE if !EXPERT
  39         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  40         select FB_SYS_FOPS
  41         select FB_SYS_FILLRECT
  42         select FB_SYS_COPYAREA
  43         select FB_SYS_IMAGEBLIT
  44         select FB_CFB_FILLRECT
  45         select FB_CFB_COPYAREA
  46         select FB_CFB_IMAGEBLIT
  47         help
  48           FBDEV helpers for KMS drivers.
  49
  50 config DRM_FBDEV_EMULATION
  51         bool "Enable legacy fbdev support for your modesetting driver"
  52         depends on DRM
  53         select DRM_KMS_HELPER
  54         select DRM_KMS_FB_HELPER
  55         default y
  56         help
  57           Choose this option if you have a need for the legacy fbdev
  58           support. Note that this support also provides the linux console
  59           support on top of your modesetting driver.
  60
  61           If in doubt, say "Y".
  62
  63 config DRM_LOAD_EDID_FIRMWARE
  64         bool "Allow to specify an EDID data set instead of probing for it"
  65         depends on DRM_KMS_HELPER
  66         help
  67           Say Y here, if you want to use EDID data to be loaded from the
  68           /lib/firmware directory or one of the provided built-in
  69           data sets. This may be necessary, if the graphics adapter or
  70           monitor are unable to provide appropriate EDID data. Since this
  71           feature is provided as a workaround for broken hardware, the
  72           default case is N. Details and instructions how to build your own
  73           EDID data are given in Documentation/EDID/HOWTO.txt.
  74
  75 config DRM_TTM
  76         tristate
  77         depends on DRM
  78         help
  79           GPU memory management subsystem for devices with multiple
  80           GPU memory types. Will be enabled automatically if a device driver
  81           uses it.
  82
  83 config DRM_GEM_CMA_HELPER
  84         bool
  85         depends on DRM && HAVE_DMA_ATTRS
  86         help
  87           Choose this if you need the GEM CMA helper functions
  88
  89 config DRM_KMS_CMA_HELPER
  90         bool
  91         depends on DRM && HAVE_DMA_ATTRS
  92         select DRM_GEM_CMA_HELPER
  93         select DRM_KMS_FB_HELPER
  94         select FB_SYS_FILLRECT
  95         select FB_SYS_COPYAREA
  96         select FB_SYS_IMAGEBLIT
  97         help
  98           Choose this if you need the KMS CMA helper functions
  99
 100 source "drivers/gpu/drm/i2c/Kconfig"
 101
 102 config DRM_TDFX
 103         tristate "3dfx Banshee/Voodoo3+"
 104         depends on DRM && PCI
 105         help
 106           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 107           graphics card.  If M is selected, the module will be called tdfx.
 108
 109 config DRM_R128
 110         tristate "ATI Rage 128"
 111         depends on DRM && PCI
 112         select FW_LOADER
 113         help
 114           Choose this option if you have an ATI Rage 128 graphics card.  If M
 115           is selected, the module will be called r128.  AGP support for
 116           this card is strongly suggested (unless you have a PCI version).
 117
 118 config DRM_RADEON
 119         tristate "ATI Radeon"
 120         depends on DRM && PCI
 121         select FB_CFB_FILLRECT
 122         select FB_CFB_COPYAREA
 123         select FB_CFB_IMAGEBLIT
 124         select FW_LOADER
 125         select DRM_KMS_HELPER
 126         select DRM_KMS_FB_HELPER
 127         select DRM_TTM
 128         select POWER_SUPPLY
 129         select HWMON
 130         select BACKLIGHT_CLASS_DEVICE
 131         select INTERVAL_TREE
 132         help
 133           Choose this option if you have an ATI Radeon graphics card.  There
 134           are both PCI and AGP versions.  You don't need to choose this to
 135           run the Radeon in plain VGA mode.
 136
 137           If M is selected, the module will be called radeon.
 138
 139 source "drivers/gpu/drm/radeon/Kconfig"
 140
 141 config DRM_AMDGPU
 142         tristate "AMD GPU"
 143         depends on DRM && PCI
 144         select FB_CFB_FILLRECT
 145         select FB_CFB_COPYAREA
 146         select FB_CFB_IMAGEBLIT
 147         select FW_LOADER
 148         select DRM_KMS_HELPER
 149         select DRM_KMS_FB_HELPER
 150         select DRM_TTM
 151         select POWER_SUPPLY
 152         select HWMON
 153         select BACKLIGHT_CLASS_DEVICE
 154         select INTERVAL_TREE
 155         help
 156           Choose this option if you have a recent AMD Radeon graphics card.
 157
 158           If M is selected, the module will be called amdgpu.
 159
 160 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
 161
 162 source "drivers/gpu/drm/nouveau/Kconfig"
 163
 164 config DRM_I810
 165         tristate "Intel I810"
 166         # !PREEMPT because of missing ioctl locking
 167         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 168         help
 169           Choose this option if you have an Intel I810 graphics card.  If M is
 170           selected, the module will be called i810.  AGP support is required
 171           for this driver to work.
 172
 173 source "drivers/gpu/drm/i915/Kconfig"
 174
 175 config DRM_MGA
 176         tristate "Matrox g200/g400"
 177         depends on DRM && PCI
 178         select FW_LOADER
 179         help
 180           Choose this option if you have a Matrox G200, G400 or G450 graphics
 181           card.  If M is selected, the module will be called mga.  AGP
 182           support is required for this driver to work.
 183
 184 config DRM_SIS
 185         tristate "SiS video cards"
 186         depends on DRM && AGP
 187         depends on FB_SIS || FB_SIS=n
 188         help
 189           Choose this option if you have a SiS 630 or compatible video
 190           chipset. If M is selected the module will be called sis. AGP
 191           support is required for this driver to work.
 192
 193 config DRM_VIA
 194         tristate "Via unichrome video cards"
 195         depends on DRM && PCI
 196         help
 197           Choose this option if you have a Via unichrome or compatible video
 198           chipset. If M is selected the module will be called via.
 199
 200 config DRM_SAVAGE
 201         tristate "Savage video cards"
 202         depends on DRM && PCI
 203         help
 204           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 205           chipset. If M is selected the module will be called savage.
 206
 207 config DRM_VGEM
 208         tristate "Virtual GEM provider"
 209         depends on DRM
 210         help
 211           Choose this option to get a virtual graphics memory manager,
 212           as used by Mesa's software renderer for enhanced performance.
 213           If M is selected the module will be called vgem.
 214
 215
 216 source "drivers/gpu/drm/exynos/Kconfig"
 217
 218 source "drivers/gpu/drm/rockchip/Kconfig"
 219
 220 source "drivers/gpu/drm/vmwgfx/Kconfig"
 221
 222 source "drivers/gpu/drm/gma500/Kconfig"
 223
 224 source "drivers/gpu/drm/udl/Kconfig"
 225
 226 source "drivers/gpu/drm/ast/Kconfig"
 227
 228 source "drivers/gpu/drm/mgag200/Kconfig"
 229
 230 source "drivers/gpu/drm/cirrus/Kconfig"
 231
 232 source "drivers/gpu/drm/armada/Kconfig"
 233
 234 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
 235
 236 source "drivers/gpu/drm/rcar-du/Kconfig"
 237
 238 source "drivers/gpu/drm/shmobile/Kconfig"
 239
 240 source "drivers/gpu/drm/omapdrm/Kconfig"
 241
 242 source "drivers/gpu/drm/tilcdc/Kconfig"
 243
 244 source "drivers/gpu/drm/qxl/Kconfig"
 245
 246 source "drivers/gpu/drm/bochs/Kconfig"
 247
 248 source "drivers/gpu/drm/virtio/Kconfig"
 249
 250 source "drivers/gpu/drm/msm/Kconfig"
 251
 252 source "drivers/gpu/drm/tegra/Kconfig"
 253
 254 source "drivers/gpu/drm/panel/Kconfig"
 255
 256 source "drivers/gpu/drm/bridge/Kconfig"
 257
 258 source "drivers/gpu/drm/sti/Kconfig"
 259
 260 source "drivers/gpu/drm/amd/amdkfd/Kconfig"
 261
 262 source "drivers/gpu/drm/imx/Kconfig"