drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
  10         select I2C
  11         select I2C_ALGOBIT
  12         select SLOW_WORK
  13         help
  14           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  15           introduced in XFree86 4.0. If you say Y here, you need to select
  16           the module that's right for your graphics card from the list below.
  17           These modules provide support for synchronization, security, and
  18           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  19           details.  You should also select and configure AGP
  20           (/dev/agpgart) support if it is available for your platform.
  21
  22 config DRM_KMS_HELPER
  23         tristate
  24         depends on DRM
  25         select FB
  26         select FRAMEBUFFER_CONSOLE if !EXPERT
  27         help
  28           FB and CRTC helpers for KMS drivers.
  29
  30 config DRM_TTM
  31         tristate
  32         depends on DRM
  33         help
  34           GPU memory management subsystem for devices with multiple
  35           GPU memory types. Will be enabled automatically if a device driver
  36           uses it.
  37
  38 config DRM_TDFX
  39         tristate "3dfx Banshee/Voodoo3+"
  40         depends on DRM && PCI
  41         help
  42           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
  43           graphics card.  If M is selected, the module will be called tdfx.
  44
  45 config DRM_R128
  46         tristate "ATI Rage 128"
  47         depends on DRM && PCI
  48         select FW_LOADER
  49         help
  50           Choose this option if you have an ATI Rage 128 graphics card.  If M
  51           is selected, the module will be called r128.  AGP support for
  52           this card is strongly suggested (unless you have a PCI version).
  53
  54 config DRM_RADEON
  55         tristate "ATI Radeon"
  56         depends on DRM && PCI
  57         select FB_CFB_FILLRECT
  58         select FB_CFB_COPYAREA
  59         select FB_CFB_IMAGEBLIT
  60         select FW_LOADER
  61         select DRM_KMS_HELPER
  62         select DRM_TTM
  63         select POWER_SUPPLY
  64         select HWMON
  65         help
  66           Choose this option if you have an ATI Radeon graphics card.  There
  67           are both PCI and AGP versions.  You don't need to choose this to
  68           run the Radeon in plain VGA mode.
  69
  70           If M is selected, the module will be called radeon.
  71
  72 source "drivers/gpu/drm/radeon/Kconfig"
  73
  74 config DRM_I810
  75         tristate "Intel I810"
  76         # BKL usage in order to avoid AB-BA deadlocks, may become BROKEN_ON_SMP
  77         depends on DRM && AGP && AGP_INTEL && BKL
  78         help
  79           Choose this option if you have an Intel I810 graphics card.  If M is
  80           selected, the module will be called i810.  AGP support is required
  81           for this driver to work.
  82
  83 config DRM_I915
  84         tristate "Intel 8xx/9xx/G3x/G4x/HD Graphics"
  85         depends on DRM
  86         depends on AGP
  87         depends on AGP_INTEL
  88         # we need shmfs for the swappable backing store, and in particular
  89         # the shmem_readpage() which depends upon tmpfs
  90         select SHMEM
  91         select TMPFS
  92         select DRM_KMS_HELPER
  93         select FB_CFB_FILLRECT
  94         select FB_CFB_COPYAREA
  95         select FB_CFB_IMAGEBLIT
  96         # i915 depends on ACPI_VIDEO when ACPI is enabled
  97         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
  98         select BACKLIGHT_CLASS_DEVICE if ACPI
  99         select INPUT if ACPI
 100         select ACPI_VIDEO if ACPI
 101         select ACPI_BUTTON if ACPI
 102         help
 103           Choose this option if you have a system that has "Intel Graphics
 104           Media Accelerator" or "HD Graphics" integrated graphics,
 105           including 830M, 845G, 852GM, 855GM, 865G, 915G, 945G, 965G,
 106           G35, G41, G43, G45 chipsets and Celeron, Pentium, Core i3,
 107           Core i5, Core i7 as well as Atom CPUs with integrated graphics.
 108           If M is selected, the module will be called i915.  AGP support
 109           is required for this driver to work. This driver is used by
 110           the Intel driver in X.org 6.8 and XFree86 4.4 and above. It
 111           replaces the older i830 module that supported a subset of the
 112           hardware in older X.org releases.
 113
 114           Note that the older i810/i815 chipsets require the use of the
 115           i810 driver instead, and the Atom z5xx series has an entirely
 116           different implementation.
 117
 118 config DRM_I915_KMS
 119         bool "Enable modesetting on intel by default"
 120         depends on DRM_I915
 121         help
 122           Choose this option if you want kernel modesetting enabled by default,
 123           and you have a new enough userspace to support this. Running old
 124           userspaces with this enabled will cause pain.  Note that this causes
 125           the driver to bind to PCI devices, which precludes loading things
 126           like intelfb.
 127
 128 config DRM_MGA
 129         tristate "Matrox g200/g400"
 130         depends on DRM && PCI
 131         select FW_LOADER
 132         help
 133           Choose this option if you have a Matrox G200, G400 or G450 graphics
 134           card.  If M is selected, the module will be called mga.  AGP
 135           support is required for this driver to work.
 136
 137 config DRM_SIS
 138         tristate "SiS video cards"
 139         depends on DRM && AGP
 140         depends on FB_SIS || FB_SIS=n
 141         help
 142           Choose this option if you have a SiS 630 or compatible video
 143           chipset. If M is selected the module will be called sis. AGP
 144           support is required for this driver to work.
 145
 146 config DRM_VIA
 147         tristate "Via unichrome video cards"
 148         depends on DRM && PCI
 149         help
 150           Choose this option if you have a Via unichrome or compatible video
 151           chipset. If M is selected the module will be called via.
 152
 153 config DRM_SAVAGE
 154         tristate "Savage video cards"
 155         depends on DRM && PCI
 156         help
 157           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 158           chipset. If M is selected the module will be called savage.