2 * Copyright (c) 2006-2008 Intel Corporation
3 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
5 * DRM core CRTC related functions
7 * Permission to use, copy, modify, distribute, and sell this software and its
8 * documentation for any purpose is hereby granted without fee, provided that
9 * the above copyright notice appear in all copies and that both that copyright
10 * notice and this permission notice appear in supporting documentation, and
11 * that the name of the copyright holders not be used in advertising or
12 * publicity pertaining to distribution of the software without specific,
13 * written prior permission. The copyright holders make no representations
14 * about the suitability of this software for any purpose. It is provided "as
15 * is" without express or implied warranty.
17 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
18 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
19 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
20 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
21 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
22 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 * Eric Anholt <eric@anholt.net>
28 * Dave Airlie <airlied@linux.ie>
29 * Jesse Barnes <jesse.barnes@intel.com>
32 #include <linux/kernel.h>
33 #include <linux/export.h>
34 #include <linux/moduleparam.h>
37 #include <drm/drm_atomic.h>
38 #include <drm/drm_crtc.h>
39 #include <drm/drm_fourcc.h>
40 #include <drm/drm_crtc_helper.h>
41 #include <drm/drm_fb_helper.h>
42 #include <drm/drm_plane_helper.h>
43 #include <drm/drm_atomic_helper.h>
44 #include <drm/drm_edid.h>
49 * The CRTC modeset helper library provides a default set_config implementation
50 * in drm_crtc_helper_set_config(). Plus a few other convenience functions using
51 * the same callbacks which drivers can use to e.g. restore the modeset
52 * configuration on resume with drm_helper_resume_force_mode().
54 * Note that this helper library doesn't track the current power state of CRTCs
55 * and encoders. It can call callbacks like ->dpms() even though the hardware is
56 * already in the desired state. This deficiency has been fixed in the atomic
59 * The driver callbacks are mostly compatible with the atomic modeset helpers,
60 * except for the handling of the primary plane: Atomic helpers require that the
61 * primary plane is implemented as a real standalone plane and not directly tied
62 * to the CRTC state. For easier transition this library provides functions to
63 * implement the old semantics required by the CRTC helpers using the new plane
64 * and atomic helper callbacks.
66 * Drivers are strongly urged to convert to the atomic helpers (by way of first
67 * converting to the plane helpers). New drivers must not use these functions
68 * but need to implement the atomic interface instead, potentially using the
69 * atomic helpers for that.
71 * These legacy modeset helpers use the same function table structures as
72 * all other modesetting helpers. See the documentation for struct
73 * &drm_crtc_helper_funcs, struct &drm_encoder_helper_funcs and struct
74 * &drm_connector_helper_funcs.
78 * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
80 * @dev: drm device to operate on
82 * Some userspace presumes that the first connected connector is the main
83 * display, where it's supposed to display e.g. the login screen. For
84 * laptops, this should be the main panel. Use this function to sort all
85 * (eDP/LVDS) panels to the front of the connector list, instead of
86 * painstakingly trying to initialize them in the right order.
88 void drm_helper_move_panel_connectors_to_head(struct drm_device
*dev
)
90 struct drm_connector
*connector
, *tmp
;
91 struct list_head panel_list
;
93 INIT_LIST_HEAD(&panel_list
);
95 list_for_each_entry_safe(connector
, tmp
,
96 &dev
->mode_config
.connector_list
, head
) {
97 if (connector
->connector_type
== DRM_MODE_CONNECTOR_LVDS
||
98 connector
->connector_type
== DRM_MODE_CONNECTOR_eDP
)
99 list_move_tail(&connector
->head
, &panel_list
);
102 list_splice(&panel_list
, &dev
->mode_config
.connector_list
);
104 EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head
);
107 * drm_helper_encoder_in_use - check if a given encoder is in use
108 * @encoder: encoder to check
110 * Checks whether @encoder is with the current mode setting output configuration
111 * in use by any connector. This doesn't mean that it is actually enabled since
112 * the DPMS state is tracked separately.
115 * True if @encoder is used, false otherwise.
117 bool drm_helper_encoder_in_use(struct drm_encoder
*encoder
)
119 struct drm_connector
*connector
;
120 struct drm_device
*dev
= encoder
->dev
;
123 * We can expect this mutex to be locked if we are not panicking.
124 * Locking is currently fubar in the panic handler.
126 if (!oops_in_progress
) {
127 WARN_ON(!mutex_is_locked(&dev
->mode_config
.mutex
));
128 WARN_ON(!drm_modeset_is_locked(&dev
->mode_config
.connection_mutex
));
131 drm_for_each_connector(connector
, dev
)
132 if (connector
->encoder
== encoder
)
136 EXPORT_SYMBOL(drm_helper_encoder_in_use
);
139 * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
140 * @crtc: CRTC to check
142 * Checks whether @crtc is with the current mode setting output configuration
143 * in use by any connector. This doesn't mean that it is actually enabled since
144 * the DPMS state is tracked separately.
147 * True if @crtc is used, false otherwise.
149 bool drm_helper_crtc_in_use(struct drm_crtc
*crtc
)
151 struct drm_encoder
*encoder
;
152 struct drm_device
*dev
= crtc
->dev
;
155 * We can expect this mutex to be locked if we are not panicking.
156 * Locking is currently fubar in the panic handler.
158 if (!oops_in_progress
)
159 WARN_ON(!mutex_is_locked(&dev
->mode_config
.mutex
));
161 drm_for_each_encoder(encoder
, dev
)
162 if (encoder
->crtc
== crtc
&& drm_helper_encoder_in_use(encoder
))
166 EXPORT_SYMBOL(drm_helper_crtc_in_use
);
169 drm_encoder_disable(struct drm_encoder
*encoder
)
171 const struct drm_encoder_helper_funcs
*encoder_funcs
= encoder
->helper_private
;
176 drm_bridge_disable(encoder
->bridge
);
178 if (encoder_funcs
->disable
)
179 (*encoder_funcs
->disable
)(encoder
);
180 else if (encoder_funcs
->dpms
)
181 (*encoder_funcs
->dpms
)(encoder
, DRM_MODE_DPMS_OFF
);
183 drm_bridge_post_disable(encoder
->bridge
);
186 static void __drm_helper_disable_unused_functions(struct drm_device
*dev
)
188 struct drm_encoder
*encoder
;
189 struct drm_crtc
*crtc
;
191 drm_warn_on_modeset_not_all_locked(dev
);
193 drm_for_each_encoder(encoder
, dev
) {
194 if (!drm_helper_encoder_in_use(encoder
)) {
195 drm_encoder_disable(encoder
);
196 /* disconnect encoder from any connector */
197 encoder
->crtc
= NULL
;
201 drm_for_each_crtc(crtc
, dev
) {
202 const struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
203 crtc
->enabled
= drm_helper_crtc_in_use(crtc
);
204 if (!crtc
->enabled
) {
205 if (crtc_funcs
->disable
)
206 (*crtc_funcs
->disable
)(crtc
);
208 (*crtc_funcs
->dpms
)(crtc
, DRM_MODE_DPMS_OFF
);
209 crtc
->primary
->fb
= NULL
;
215 * drm_helper_disable_unused_functions - disable unused objects
218 * This function walks through the entire mode setting configuration of @dev. It
219 * will remove any CRTC links of unused encoders and encoder links of
220 * disconnected connectors. Then it will disable all unused encoders and CRTCs
221 * either by calling their disable callback if available or by calling their
222 * dpms callback with DRM_MODE_DPMS_OFF.
226 * This function is part of the legacy modeset helper library and will cause
227 * major confusion with atomic drivers. This is because atomic helpers guarantee
228 * to never call ->disable() hooks on a disabled function, or ->enable() hooks
229 * on an enabled functions. drm_helper_disable_unused_functions() on the other
230 * hand throws such guarantees into the wind and calls disable hooks
231 * unconditionally on unused functions.
233 void drm_helper_disable_unused_functions(struct drm_device
*dev
)
235 if (drm_core_check_feature(dev
, DRIVER_ATOMIC
))
236 DRM_ERROR("Called for atomic driver, this is not what you want.\n");
238 drm_modeset_lock_all(dev
);
239 __drm_helper_disable_unused_functions(dev
);
240 drm_modeset_unlock_all(dev
);
242 EXPORT_SYMBOL(drm_helper_disable_unused_functions
);
245 * Check the CRTC we're going to map each output to vs. its current
246 * CRTC. If they don't match, we have to disable the output and the CRTC
247 * since the driver will have to re-route things.
250 drm_crtc_prepare_encoders(struct drm_device
*dev
)
252 const struct drm_encoder_helper_funcs
*encoder_funcs
;
253 struct drm_encoder
*encoder
;
255 drm_for_each_encoder(encoder
, dev
) {
256 encoder_funcs
= encoder
->helper_private
;
260 /* Disable unused encoders */
261 if (encoder
->crtc
== NULL
)
262 drm_encoder_disable(encoder
);
263 /* Disable encoders whose CRTC is about to change */
264 if (encoder_funcs
->get_crtc
&&
265 encoder
->crtc
!= (*encoder_funcs
->get_crtc
)(encoder
))
266 drm_encoder_disable(encoder
);
271 * drm_crtc_helper_set_mode - internal helper to set a mode
272 * @crtc: CRTC to program
274 * @x: horizontal offset into the surface
275 * @y: vertical offset into the surface
276 * @old_fb: old framebuffer, for cleanup
278 * Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
279 * to fixup or reject the mode prior to trying to set it. This is an internal
280 * helper that drivers could e.g. use to update properties that require the
281 * entire output pipe to be disabled and re-enabled in a new configuration. For
282 * example for changing whether audio is enabled on a hdmi link or for changing
283 * panel fitter or dither attributes. It is also called by the
284 * drm_crtc_helper_set_config() helper function to drive the mode setting
288 * True if the mode was set successfully, false otherwise.
290 bool drm_crtc_helper_set_mode(struct drm_crtc
*crtc
,
291 struct drm_display_mode
*mode
,
293 struct drm_framebuffer
*old_fb
)
295 struct drm_device
*dev
= crtc
->dev
;
296 struct drm_display_mode
*adjusted_mode
, saved_mode
, saved_hwmode
;
297 const struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
298 const struct drm_encoder_helper_funcs
*encoder_funcs
;
299 int saved_x
, saved_y
;
301 struct drm_encoder
*encoder
;
304 drm_warn_on_modeset_not_all_locked(dev
);
306 saved_enabled
= crtc
->enabled
;
307 crtc
->enabled
= drm_helper_crtc_in_use(crtc
);
311 adjusted_mode
= drm_mode_duplicate(dev
, mode
);
312 if (!adjusted_mode
) {
313 crtc
->enabled
= saved_enabled
;
317 saved_mode
= crtc
->mode
;
318 saved_hwmode
= crtc
->hwmode
;
322 /* Update crtc values up front so the driver can rely on them for mode
329 /* Pass our mode to the connectors and the CRTC to give them a chance to
330 * adjust it according to limitations or connector properties, and also
331 * a chance to reject the mode entirely.
333 drm_for_each_encoder(encoder
, dev
) {
335 if (encoder
->crtc
!= crtc
)
338 encoder_funcs
= encoder
->helper_private
;
342 ret
= drm_bridge_mode_fixup(encoder
->bridge
,
343 mode
, adjusted_mode
);
345 DRM_DEBUG_KMS("Bridge fixup failed\n");
349 encoder_funcs
= encoder
->helper_private
;
350 if (encoder_funcs
->mode_fixup
) {
351 if (!(ret
= encoder_funcs
->mode_fixup(encoder
, mode
,
353 DRM_DEBUG_KMS("Encoder fixup failed\n");
359 if (crtc_funcs
->mode_fixup
) {
360 if (!(ret
= crtc_funcs
->mode_fixup(crtc
, mode
,
362 DRM_DEBUG_KMS("CRTC fixup failed\n");
366 DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc
->base
.id
, crtc
->name
);
368 crtc
->hwmode
= *adjusted_mode
;
370 /* Prepare the encoders and CRTCs before setting the mode. */
371 drm_for_each_encoder(encoder
, dev
) {
373 if (encoder
->crtc
!= crtc
)
376 encoder_funcs
= encoder
->helper_private
;
380 drm_bridge_disable(encoder
->bridge
);
382 /* Disable the encoders as the first thing we do. */
383 if (encoder_funcs
->prepare
)
384 encoder_funcs
->prepare(encoder
);
386 drm_bridge_post_disable(encoder
->bridge
);
389 drm_crtc_prepare_encoders(dev
);
391 crtc_funcs
->prepare(crtc
);
393 /* Set up the DPLL and any encoders state that needs to adjust or depend
396 ret
= !crtc_funcs
->mode_set(crtc
, mode
, adjusted_mode
, x
, y
, old_fb
);
400 drm_for_each_encoder(encoder
, dev
) {
402 if (encoder
->crtc
!= crtc
)
405 encoder_funcs
= encoder
->helper_private
;
409 DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
410 encoder
->base
.id
, encoder
->name
,
411 mode
->base
.id
, mode
->name
);
412 if (encoder_funcs
->mode_set
)
413 encoder_funcs
->mode_set(encoder
, mode
, adjusted_mode
);
415 drm_bridge_mode_set(encoder
->bridge
, mode
, adjusted_mode
);
418 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
419 crtc_funcs
->commit(crtc
);
421 drm_for_each_encoder(encoder
, dev
) {
423 if (encoder
->crtc
!= crtc
)
426 encoder_funcs
= encoder
->helper_private
;
430 drm_bridge_pre_enable(encoder
->bridge
);
432 if (encoder_funcs
->commit
)
433 encoder_funcs
->commit(encoder
);
435 drm_bridge_enable(encoder
->bridge
);
438 /* Calculate and store various constants which
439 * are later needed by vblank and swap-completion
440 * timestamping. They are derived from true hwmode.
442 drm_calc_timestamping_constants(crtc
, &crtc
->hwmode
);
444 /* FIXME: add subpixel order */
446 drm_mode_destroy(dev
, adjusted_mode
);
448 crtc
->enabled
= saved_enabled
;
449 crtc
->mode
= saved_mode
;
450 crtc
->hwmode
= saved_hwmode
;
457 EXPORT_SYMBOL(drm_crtc_helper_set_mode
);
460 drm_crtc_helper_disable(struct drm_crtc
*crtc
)
462 struct drm_device
*dev
= crtc
->dev
;
463 struct drm_connector
*connector
;
464 struct drm_encoder
*encoder
;
466 /* Decouple all encoders and their attached connectors from this crtc */
467 drm_for_each_encoder(encoder
, dev
) {
468 if (encoder
->crtc
!= crtc
)
471 drm_for_each_connector(connector
, dev
) {
472 if (connector
->encoder
!= encoder
)
475 connector
->encoder
= NULL
;
478 * drm_helper_disable_unused_functions() ought to be
479 * doing this, but since we've decoupled the encoder
480 * from the connector above, the required connection
481 * between them is henceforth no longer available.
483 connector
->dpms
= DRM_MODE_DPMS_OFF
;
485 /* we keep a reference while the encoder is bound */
486 drm_connector_unreference(connector
);
490 __drm_helper_disable_unused_functions(dev
);
494 * drm_crtc_helper_set_config - set a new config from userspace
495 * @set: mode set configuration
497 * The drm_crtc_helper_set_config() helper function implements the set_config
498 * callback of struct &drm_crtc_funcs for drivers using the legacy CRTC helpers.
500 * It first tries to locate the best encoder for each connector by calling the
501 * connector ->best_encoder() (struct &drm_connector_helper_funcs) helper
504 * After locating the appropriate encoders, the helper function will call the
505 * mode_fixup encoder and CRTC helper operations to adjust the requested mode,
506 * or reject it completely in which case an error will be returned to the
507 * application. If the new configuration after mode adjustment is identical to
508 * the current configuration the helper function will return without performing
509 * any other operation.
511 * If the adjusted mode is identical to the current mode but changes to the
512 * frame buffer need to be applied, the drm_crtc_helper_set_config() function
513 * will call the CRTC ->mode_set_base() (struct &drm_crtc_helper_funcs) helper
516 * If the adjusted mode differs from the current mode, or if the
517 * ->mode_set_base() helper operation is not provided, the helper function
518 * performs a full mode set sequence by calling the ->prepare(), ->mode_set()
519 * and ->commit() CRTC and encoder helper operations, in that order.
520 * Alternatively it can also use the dpms and disable helper operations. For
521 * details see struct &drm_crtc_helper_funcs and struct
522 * &drm_encoder_helper_funcs.
524 * This function is deprecated. New drivers must implement atomic modeset
525 * support, for which this function is unsuitable. Instead drivers should use
526 * drm_atomic_helper_set_config().
529 * Returns 0 on success, negative errno numbers on failure.
531 int drm_crtc_helper_set_config(struct drm_mode_set
*set
)
533 struct drm_device
*dev
;
534 struct drm_crtc
**save_encoder_crtcs
, *new_crtc
;
535 struct drm_encoder
**save_connector_encoders
, *new_encoder
, *encoder
;
536 bool mode_changed
= false; /* if true do a full mode set */
537 bool fb_changed
= false; /* if true and !mode_changed just do a flip */
538 struct drm_connector
*connector
;
539 int count
= 0, ro
, fail
= 0;
540 const struct drm_crtc_helper_funcs
*crtc_funcs
;
541 struct drm_mode_set save_set
;
549 BUG_ON(!set
->crtc
->helper_private
);
551 /* Enforce sane interface api - has been abused by the fb helper. */
552 BUG_ON(!set
->mode
&& set
->fb
);
553 BUG_ON(set
->fb
&& set
->num_connectors
== 0);
555 crtc_funcs
= set
->crtc
->helper_private
;
561 DRM_DEBUG_KMS("[CRTC:%d:%s] [FB:%d] #connectors=%d (x y) (%i %i)\n",
562 set
->crtc
->base
.id
, set
->crtc
->name
,
564 (int)set
->num_connectors
, set
->x
, set
->y
);
566 DRM_DEBUG_KMS("[CRTC:%d:%s] [NOFB]\n",
567 set
->crtc
->base
.id
, set
->crtc
->name
);
568 drm_crtc_helper_disable(set
->crtc
);
572 dev
= set
->crtc
->dev
;
574 drm_warn_on_modeset_not_all_locked(dev
);
577 * Allocate space for the backup of all (non-pointer) encoder and
580 save_encoder_crtcs
= kzalloc(dev
->mode_config
.num_encoder
*
581 sizeof(struct drm_crtc
*), GFP_KERNEL
);
582 if (!save_encoder_crtcs
)
585 save_connector_encoders
= kzalloc(dev
->mode_config
.num_connector
*
586 sizeof(struct drm_encoder
*), GFP_KERNEL
);
587 if (!save_connector_encoders
) {
588 kfree(save_encoder_crtcs
);
593 * Copy data. Note that driver private data is not affected.
594 * Should anything bad happen only the expected state is
595 * restored, not the drivers personal bookkeeping.
598 drm_for_each_encoder(encoder
, dev
) {
599 save_encoder_crtcs
[count
++] = encoder
->crtc
;
603 drm_for_each_connector(connector
, dev
) {
604 save_connector_encoders
[count
++] = connector
->encoder
;
607 save_set
.crtc
= set
->crtc
;
608 save_set
.mode
= &set
->crtc
->mode
;
609 save_set
.x
= set
->crtc
->x
;
610 save_set
.y
= set
->crtc
->y
;
611 save_set
.fb
= set
->crtc
->primary
->fb
;
613 /* We should be able to check here if the fb has the same properties
614 * and then just flip_or_move it */
615 if (set
->crtc
->primary
->fb
!= set
->fb
) {
616 /* If we have no fb then treat it as a full mode set */
617 if (set
->crtc
->primary
->fb
== NULL
) {
618 DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
620 } else if (set
->fb
->pixel_format
!=
621 set
->crtc
->primary
->fb
->pixel_format
) {
627 if (set
->x
!= set
->crtc
->x
|| set
->y
!= set
->crtc
->y
)
630 if (!drm_mode_equal(set
->mode
, &set
->crtc
->mode
)) {
631 DRM_DEBUG_KMS("modes are different, full mode set\n");
632 drm_mode_debug_printmodeline(&set
->crtc
->mode
);
633 drm_mode_debug_printmodeline(set
->mode
);
637 /* take a reference on all unbound connectors in set, reuse the
638 * already taken reference for bound connectors
640 for (ro
= 0; ro
< set
->num_connectors
; ro
++) {
641 if (set
->connectors
[ro
]->encoder
)
643 drm_connector_reference(set
->connectors
[ro
]);
646 /* a) traverse passed in connector list and get encoders for them */
648 drm_for_each_connector(connector
, dev
) {
649 const struct drm_connector_helper_funcs
*connector_funcs
=
650 connector
->helper_private
;
651 new_encoder
= connector
->encoder
;
652 for (ro
= 0; ro
< set
->num_connectors
; ro
++) {
653 if (set
->connectors
[ro
] == connector
) {
654 new_encoder
= connector_funcs
->best_encoder(connector
);
655 /* if we can't get an encoder for a connector
656 we are setting now - then fail */
657 if (new_encoder
== NULL
)
658 /* don't break so fail path works correct */
661 if (connector
->dpms
!= DRM_MODE_DPMS_ON
) {
662 DRM_DEBUG_KMS("connector dpms not on, full mode switch\n");
670 if (new_encoder
!= connector
->encoder
) {
671 DRM_DEBUG_KMS("encoder changed, full mode switch\n");
673 /* If the encoder is reused for another connector, then
674 * the appropriate crtc will be set later.
676 if (connector
->encoder
)
677 connector
->encoder
->crtc
= NULL
;
678 connector
->encoder
= new_encoder
;
688 drm_for_each_connector(connector
, dev
) {
689 if (!connector
->encoder
)
692 if (connector
->encoder
->crtc
== set
->crtc
)
695 new_crtc
= connector
->encoder
->crtc
;
697 for (ro
= 0; ro
< set
->num_connectors
; ro
++) {
698 if (set
->connectors
[ro
] == connector
)
699 new_crtc
= set
->crtc
;
702 /* Make sure the new CRTC will work with the encoder */
704 !drm_encoder_crtc_ok(connector
->encoder
, new_crtc
)) {
708 if (new_crtc
!= connector
->encoder
->crtc
) {
709 DRM_DEBUG_KMS("crtc changed, full mode switch\n");
711 connector
->encoder
->crtc
= new_crtc
;
714 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d:%s]\n",
715 connector
->base
.id
, connector
->name
,
716 new_crtc
->base
.id
, new_crtc
->name
);
718 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
719 connector
->base
.id
, connector
->name
);
723 /* mode_set_base is not a required function */
724 if (fb_changed
&& !crtc_funcs
->mode_set_base
)
728 if (drm_helper_crtc_in_use(set
->crtc
)) {
729 DRM_DEBUG_KMS("attempting to set mode from"
731 drm_mode_debug_printmodeline(set
->mode
);
732 set
->crtc
->primary
->fb
= set
->fb
;
733 if (!drm_crtc_helper_set_mode(set
->crtc
, set
->mode
,
736 DRM_ERROR("failed to set mode on [CRTC:%d:%s]\n",
737 set
->crtc
->base
.id
, set
->crtc
->name
);
738 set
->crtc
->primary
->fb
= save_set
.fb
;
742 DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
743 for (i
= 0; i
< set
->num_connectors
; i
++) {
744 DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set
->connectors
[i
]->base
.id
,
745 set
->connectors
[i
]->name
);
746 set
->connectors
[i
]->funcs
->dpms(set
->connectors
[i
], DRM_MODE_DPMS_ON
);
749 __drm_helper_disable_unused_functions(dev
);
750 } else if (fb_changed
) {
751 set
->crtc
->x
= set
->x
;
752 set
->crtc
->y
= set
->y
;
753 set
->crtc
->primary
->fb
= set
->fb
;
754 ret
= crtc_funcs
->mode_set_base(set
->crtc
,
755 set
->x
, set
->y
, save_set
.fb
);
757 set
->crtc
->x
= save_set
.x
;
758 set
->crtc
->y
= save_set
.y
;
759 set
->crtc
->primary
->fb
= save_set
.fb
;
764 kfree(save_connector_encoders
);
765 kfree(save_encoder_crtcs
);
769 /* Restore all previous data. */
771 drm_for_each_encoder(encoder
, dev
) {
772 encoder
->crtc
= save_encoder_crtcs
[count
++];
776 drm_for_each_connector(connector
, dev
) {
777 connector
->encoder
= save_connector_encoders
[count
++];
780 /* after fail drop reference on all unbound connectors in set, let
781 * bound connectors keep their reference
783 for (ro
= 0; ro
< set
->num_connectors
; ro
++) {
784 if (set
->connectors
[ro
]->encoder
)
786 drm_connector_unreference(set
->connectors
[ro
]);
789 /* Try to restore the config */
791 !drm_crtc_helper_set_mode(save_set
.crtc
, save_set
.mode
, save_set
.x
,
792 save_set
.y
, save_set
.fb
))
793 DRM_ERROR("failed to restore config after modeset failure\n");
795 kfree(save_connector_encoders
);
796 kfree(save_encoder_crtcs
);
799 EXPORT_SYMBOL(drm_crtc_helper_set_config
);
801 static int drm_helper_choose_encoder_dpms(struct drm_encoder
*encoder
)
803 int dpms
= DRM_MODE_DPMS_OFF
;
804 struct drm_connector
*connector
;
805 struct drm_device
*dev
= encoder
->dev
;
807 drm_for_each_connector(connector
, dev
)
808 if (connector
->encoder
== encoder
)
809 if (connector
->dpms
< dpms
)
810 dpms
= connector
->dpms
;
814 /* Helper which handles bridge ordering around encoder dpms */
815 static void drm_helper_encoder_dpms(struct drm_encoder
*encoder
, int mode
)
817 struct drm_bridge
*bridge
= encoder
->bridge
;
818 const struct drm_encoder_helper_funcs
*encoder_funcs
;
820 encoder_funcs
= encoder
->helper_private
;
824 if (mode
== DRM_MODE_DPMS_ON
)
825 drm_bridge_pre_enable(bridge
);
827 drm_bridge_disable(bridge
);
829 if (encoder_funcs
->dpms
)
830 encoder_funcs
->dpms(encoder
, mode
);
832 if (mode
== DRM_MODE_DPMS_ON
)
833 drm_bridge_enable(bridge
);
835 drm_bridge_post_disable(bridge
);
838 static int drm_helper_choose_crtc_dpms(struct drm_crtc
*crtc
)
840 int dpms
= DRM_MODE_DPMS_OFF
;
841 struct drm_connector
*connector
;
842 struct drm_device
*dev
= crtc
->dev
;
844 drm_for_each_connector(connector
, dev
)
845 if (connector
->encoder
&& connector
->encoder
->crtc
== crtc
)
846 if (connector
->dpms
< dpms
)
847 dpms
= connector
->dpms
;
852 * drm_helper_connector_dpms() - connector dpms helper implementation
853 * @connector: affected connector
856 * The drm_helper_connector_dpms() helper function implements the ->dpms()
857 * callback of struct &drm_connector_funcs for drivers using the legacy CRTC helpers.
859 * This is the main helper function provided by the CRTC helper framework for
860 * implementing the DPMS connector attribute. It computes the new desired DPMS
861 * state for all encoders and CRTCs in the output mesh and calls the ->dpms()
862 * callbacks provided by the driver in struct &drm_crtc_helper_funcs and struct
863 * &drm_encoder_helper_funcs appropriately.
865 * This function is deprecated. New drivers must implement atomic modeset
866 * support, for which this function is unsuitable. Instead drivers should use
867 * drm_atomic_helper_connector_dpms().
872 int drm_helper_connector_dpms(struct drm_connector
*connector
, int mode
)
874 struct drm_encoder
*encoder
= connector
->encoder
;
875 struct drm_crtc
*crtc
= encoder
? encoder
->crtc
: NULL
;
876 int old_dpms
, encoder_dpms
= DRM_MODE_DPMS_OFF
;
878 if (mode
== connector
->dpms
)
881 old_dpms
= connector
->dpms
;
882 connector
->dpms
= mode
;
885 encoder_dpms
= drm_helper_choose_encoder_dpms(encoder
);
887 /* from off to on, do crtc then encoder */
888 if (mode
< old_dpms
) {
890 const struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
891 if (crtc_funcs
->dpms
)
892 (*crtc_funcs
->dpms
) (crtc
,
893 drm_helper_choose_crtc_dpms(crtc
));
896 drm_helper_encoder_dpms(encoder
, encoder_dpms
);
899 /* from on to off, do encoder then crtc */
900 if (mode
> old_dpms
) {
902 drm_helper_encoder_dpms(encoder
, encoder_dpms
);
904 const struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
905 if (crtc_funcs
->dpms
)
906 (*crtc_funcs
->dpms
) (crtc
,
907 drm_helper_choose_crtc_dpms(crtc
));
913 EXPORT_SYMBOL(drm_helper_connector_dpms
);
916 * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
917 * @fb: drm_framebuffer object to fill out
918 * @mode_cmd: metadata from the userspace fb creation request
920 * This helper can be used in a drivers fb_create callback to pre-fill the fb's
923 void drm_helper_mode_fill_fb_struct(struct drm_framebuffer
*fb
,
924 const struct drm_mode_fb_cmd2
*mode_cmd
)
928 fb
->width
= mode_cmd
->width
;
929 fb
->height
= mode_cmd
->height
;
930 for (i
= 0; i
< 4; i
++) {
931 fb
->pitches
[i
] = mode_cmd
->pitches
[i
];
932 fb
->offsets
[i
] = mode_cmd
->offsets
[i
];
933 fb
->modifier
[i
] = mode_cmd
->modifier
[i
];
935 drm_fb_get_bpp_depth(mode_cmd
->pixel_format
, &fb
->depth
,
936 &fb
->bits_per_pixel
);
937 fb
->pixel_format
= mode_cmd
->pixel_format
;
938 fb
->flags
= mode_cmd
->flags
;
940 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct
);
943 * drm_helper_resume_force_mode - force-restore mode setting configuration
944 * @dev: drm_device which should be restored
946 * Drivers which use the mode setting helpers can use this function to
947 * force-restore the mode setting configuration e.g. on resume or when something
948 * else might have trampled over the hw state (like some overzealous old BIOSen
951 * This helper doesn't provide a error return value since restoring the old
952 * config should never fail due to resource allocation issues since the driver
953 * has successfully set the restored configuration already. Hence this should
954 * boil down to the equivalent of a few dpms on calls, which also don't provide
957 * Drivers where simply restoring an old configuration again might fail (e.g.
958 * due to slight differences in allocating shared resources when the
959 * configuration is restored in a different order than when userspace set it up)
960 * need to use their own restore logic.
962 * This function is deprecated. New drivers should implement atomic mode-
963 * setting and use the atomic suspend/resume helpers.
966 * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
968 void drm_helper_resume_force_mode(struct drm_device
*dev
)
970 struct drm_crtc
*crtc
;
971 struct drm_encoder
*encoder
;
972 const struct drm_crtc_helper_funcs
*crtc_funcs
;
976 drm_modeset_lock_all(dev
);
977 drm_for_each_crtc(crtc
, dev
) {
982 ret
= drm_crtc_helper_set_mode(crtc
, &crtc
->mode
,
983 crtc
->x
, crtc
->y
, crtc
->primary
->fb
);
985 /* Restoring the old config should never fail! */
987 DRM_ERROR("failed to set mode on crtc %p\n", crtc
);
989 /* Turn off outputs that were already powered off */
990 if (drm_helper_choose_crtc_dpms(crtc
)) {
991 drm_for_each_encoder(encoder
, dev
) {
993 if(encoder
->crtc
!= crtc
)
996 encoder_dpms
= drm_helper_choose_encoder_dpms(
999 drm_helper_encoder_dpms(encoder
, encoder_dpms
);
1002 crtc_funcs
= crtc
->helper_private
;
1003 if (crtc_funcs
->dpms
)
1004 (*crtc_funcs
->dpms
) (crtc
,
1005 drm_helper_choose_crtc_dpms(crtc
));
1009 /* disable the unused connectors while restoring the modesetting */
1010 __drm_helper_disable_unused_functions(dev
);
1011 drm_modeset_unlock_all(dev
);
1013 EXPORT_SYMBOL(drm_helper_resume_force_mode
);
1016 * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers
1018 * @mode: DRM display mode which userspace requested
1019 * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks
1020 * @x: x offset of the CRTC scanout area on the underlying framebuffer
1021 * @y: y offset of the CRTC scanout area on the underlying framebuffer
1022 * @old_fb: previous framebuffer
1024 * This function implements a callback useable as the ->mode_set callback
1025 * required by the CRTC helpers. Besides the atomic plane helper functions for
1026 * the primary plane the driver must also provide the ->mode_set_nofb callback
1027 * to set up the CRTC.
1029 * This is a transitional helper useful for converting drivers to the atomic
1032 int drm_helper_crtc_mode_set(struct drm_crtc
*crtc
, struct drm_display_mode
*mode
,
1033 struct drm_display_mode
*adjusted_mode
, int x
, int y
,
1034 struct drm_framebuffer
*old_fb
)
1036 struct drm_crtc_state
*crtc_state
;
1037 const struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
1040 if (crtc
->funcs
->atomic_duplicate_state
)
1041 crtc_state
= crtc
->funcs
->atomic_duplicate_state(crtc
);
1044 drm_atomic_helper_crtc_reset(crtc
);
1046 crtc_state
= drm_atomic_helper_crtc_duplicate_state(crtc
);
1052 crtc_state
->planes_changed
= true;
1053 crtc_state
->mode_changed
= true;
1054 ret
= drm_atomic_set_mode_for_crtc(crtc_state
, mode
);
1057 drm_mode_copy(&crtc_state
->adjusted_mode
, adjusted_mode
);
1059 if (crtc_funcs
->atomic_check
) {
1060 ret
= crtc_funcs
->atomic_check(crtc
, crtc_state
);
1065 swap(crtc
->state
, crtc_state
);
1067 crtc_funcs
->mode_set_nofb(crtc
);
1069 ret
= drm_helper_crtc_mode_set_base(crtc
, x
, y
, old_fb
);
1073 if (crtc
->funcs
->atomic_destroy_state
)
1074 crtc
->funcs
->atomic_destroy_state(crtc
, crtc_state
);
1076 drm_atomic_helper_crtc_destroy_state(crtc
, crtc_state
);
1081 EXPORT_SYMBOL(drm_helper_crtc_mode_set
);
1084 * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers
1086 * @x: x offset of the CRTC scanout area on the underlying framebuffer
1087 * @y: y offset of the CRTC scanout area on the underlying framebuffer
1088 * @old_fb: previous framebuffer
1090 * This function implements a callback useable as the ->mode_set_base used
1091 * required by the CRTC helpers. The driver must provide the atomic plane helper
1092 * functions for the primary plane.
1094 * This is a transitional helper useful for converting drivers to the atomic
1097 int drm_helper_crtc_mode_set_base(struct drm_crtc
*crtc
, int x
, int y
,
1098 struct drm_framebuffer
*old_fb
)
1100 struct drm_plane_state
*plane_state
;
1101 struct drm_plane
*plane
= crtc
->primary
;
1103 if (plane
->funcs
->atomic_duplicate_state
)
1104 plane_state
= plane
->funcs
->atomic_duplicate_state(plane
);
1107 drm_atomic_helper_plane_reset(plane
);
1109 plane_state
= drm_atomic_helper_plane_duplicate_state(plane
);
1113 plane_state
->plane
= plane
;
1115 plane_state
->crtc
= crtc
;
1116 drm_atomic_set_fb_for_plane(plane_state
, crtc
->primary
->fb
);
1117 plane_state
->crtc_x
= 0;
1118 plane_state
->crtc_y
= 0;
1119 plane_state
->crtc_h
= crtc
->mode
.vdisplay
;
1120 plane_state
->crtc_w
= crtc
->mode
.hdisplay
;
1121 plane_state
->src_x
= x
<< 16;
1122 plane_state
->src_y
= y
<< 16;
1123 plane_state
->src_h
= crtc
->mode
.vdisplay
<< 16;
1124 plane_state
->src_w
= crtc
->mode
.hdisplay
<< 16;
1126 return drm_plane_helper_commit(plane
, plane_state
, old_fb
);
1128 EXPORT_SYMBOL(drm_helper_crtc_mode_set_base
);