2 * Copyright (c) 2006 Luc Verhaegen (quirks list)
3 * Copyright (c) 2007-2008 Intel Corporation
4 * Jesse Barnes <jesse.barnes@intel.com>
5 * Copyright 2010 Red Hat, Inc.
7 * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
9 * Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
11 * Permission is hereby granted, free of charge, to any person obtaining a
12 * copy of this software and associated documentation files (the "Software"),
13 * to deal in the Software without restriction, including without limitation
14 * the rights to use, copy, modify, merge, publish, distribute, sub license,
15 * and/or sell copies of the Software, and to permit persons to whom the
16 * Software is furnished to do so, subject to the following conditions:
18 * The above copyright notice and this permission notice (including the
19 * next paragraph) shall be included in all copies or substantial portions
22 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
23 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
24 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
25 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
26 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
27 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
28 * DEALINGS IN THE SOFTWARE.
30 #include <linux/kernel.h>
31 #include <linux/slab.h>
32 #include <linux/i2c.h>
33 #include <linux/export.h>
36 #include "drm_edid_modes.h"
38 #define version_greater(edid, maj, min) \
39 (((edid)->version > (maj)) || \
40 ((edid)->version == (maj) && (edid)->revision > (min)))
42 #define EDID_EST_TIMINGS 16
43 #define EDID_STD_TIMINGS 8
44 #define EDID_DETAILED_TIMINGS 4
47 * EDID blocks out in the wild have a variety of bugs, try to collect
48 * them here (note that userspace may work around broken monitors first,
49 * but fixes should make their way here so that the kernel "just works"
50 * on as many displays as possible).
53 /* First detailed mode wrong, use largest 60Hz mode */
54 #define EDID_QUIRK_PREFER_LARGE_60 (1 << 0)
55 /* Reported 135MHz pixel clock is too high, needs adjustment */
56 #define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1)
57 /* Prefer the largest mode at 75 Hz */
58 #define EDID_QUIRK_PREFER_LARGE_75 (1 << 2)
59 /* Detail timing is in cm not mm */
60 #define EDID_QUIRK_DETAILED_IN_CM (1 << 3)
61 /* Detailed timing descriptors have bogus size values, so just take the
62 * maximum size and use that.
64 #define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4)
65 /* Monitor forgot to set the first detailed is preferred bit. */
66 #define EDID_QUIRK_FIRST_DETAILED_PREFERRED (1 << 5)
67 /* use +hsync +vsync for detailed mode */
68 #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
70 struct detailed_mode_closure
{
71 struct drm_connector
*connector
;
83 static struct edid_quirk
{
87 } edid_quirk_list
[] = {
89 { "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60
},
91 { "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60
},
93 { "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED
},
95 /* Belinea 10 15 55 */
96 { "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60
},
97 { "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60
},
99 /* Envision Peripherals, Inc. EN-7100e */
100 { "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH
},
101 /* Envision EN2028 */
102 { "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60
},
104 /* Funai Electronics PM36B */
105 { "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75
|
106 EDID_QUIRK_DETAILED_IN_CM
},
108 /* LG Philips LCD LP154W01-A5 */
109 { "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE
},
110 { "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE
},
112 /* Philips 107p5 CRT */
113 { "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED
},
116 { "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED
},
118 /* Samsung SyncMaster 205BW. Note: irony */
119 { "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP
},
120 /* Samsung SyncMaster 22[5-6]BW */
121 { "SAM", 596, EDID_QUIRK_PREFER_LARGE_60
},
122 { "SAM", 638, EDID_QUIRK_PREFER_LARGE_60
},
125 /*** DDC fetch and block validation ***/
127 static const u8 edid_header
[] = {
128 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
132 * Sanity check the header of the base EDID block. Return 8 if the header
133 * is perfect, down to 0 if it's totally wrong.
135 int drm_edid_header_is_valid(const u8
*raw_edid
)
139 for (i
= 0; i
< sizeof(edid_header
); i
++)
140 if (raw_edid
[i
] == edid_header
[i
])
145 EXPORT_SYMBOL(drm_edid_header_is_valid
);
149 * Sanity check the EDID block (base or extension). Return 0 if the block
150 * doesn't check out, or 1 if it's valid.
152 bool drm_edid_block_valid(u8
*raw_edid
)
156 struct edid
*edid
= (struct edid
*)raw_edid
;
158 if (raw_edid
[0] == 0x00) {
159 int score
= drm_edid_header_is_valid(raw_edid
);
161 else if (score
>= 6) {
162 DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
163 memcpy(raw_edid
, edid_header
, sizeof(edid_header
));
169 for (i
= 0; i
< EDID_LENGTH
; i
++)
172 DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum
);
174 /* allow CEA to slide through, switches mangle this */
175 if (raw_edid
[0] != 0x02)
179 /* per-block-type checks */
180 switch (raw_edid
[0]) {
182 if (edid
->version
!= 1) {
183 DRM_ERROR("EDID has major version %d, instead of 1\n", edid
->version
);
187 if (edid
->revision
> 4)
188 DRM_DEBUG("EDID minor > 4, assuming backward compatibility\n");
199 printk(KERN_ERR
"Raw EDID:\n");
200 print_hex_dump(KERN_ERR
, " \t", DUMP_PREFIX_NONE
, 16, 1,
201 raw_edid
, EDID_LENGTH
, false);
205 EXPORT_SYMBOL(drm_edid_block_valid
);
208 * drm_edid_is_valid - sanity check EDID data
211 * Sanity-check an entire EDID record (including extensions)
213 bool drm_edid_is_valid(struct edid
*edid
)
216 u8
*raw
= (u8
*)edid
;
221 for (i
= 0; i
<= edid
->extensions
; i
++)
222 if (!drm_edid_block_valid(raw
+ i
* EDID_LENGTH
))
227 EXPORT_SYMBOL(drm_edid_is_valid
);
229 #define DDC_SEGMENT_ADDR 0x30
231 * Get EDID information via I2C.
233 * \param adapter : i2c device adaptor
234 * \param buf : EDID data buffer to be filled
235 * \param len : EDID data buffer length
236 * \return 0 on success or -1 on failure.
238 * Try to fetch EDID information by calling i2c driver function.
241 drm_do_probe_ddc_edid(struct i2c_adapter
*adapter
, unsigned char *buf
,
244 unsigned char start
= block
* EDID_LENGTH
;
245 int ret
, retries
= 5;
247 /* The core i2c driver will automatically retry the transfer if the
248 * adapter reports EAGAIN. However, we find that bit-banging transfers
249 * are susceptible to errors under a heavily loaded machine and
250 * generate spurious NAKs and timeouts. Retrying the transfer
251 * of the individual block a few times seems to overcome this.
254 struct i2c_msg msgs
[] = {
267 ret
= i2c_transfer(adapter
, msgs
, 2);
269 DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
273 } while (ret
!= 2 && --retries
);
275 return ret
== 2 ? 0 : -1;
278 static bool drm_edid_is_zero(u8
*in_edid
, int length
)
281 u32
*raw_edid
= (u32
*)in_edid
;
283 for (i
= 0; i
< length
/ 4; i
++)
284 if (*(raw_edid
+ i
) != 0)
290 drm_do_get_edid(struct drm_connector
*connector
, struct i2c_adapter
*adapter
)
292 int i
, j
= 0, valid_extensions
= 0;
295 if ((block
= kmalloc(EDID_LENGTH
, GFP_KERNEL
)) == NULL
)
298 /* base block fetch */
299 for (i
= 0; i
< 4; i
++) {
300 if (drm_do_probe_ddc_edid(adapter
, block
, 0, EDID_LENGTH
))
302 if (drm_edid_block_valid(block
))
304 if (i
== 0 && drm_edid_is_zero(block
, EDID_LENGTH
)) {
305 connector
->null_edid_counter
++;
312 /* if there's no extensions, we're done */
313 if (block
[0x7e] == 0)
316 new = krealloc(block
, (block
[0x7e] + 1) * EDID_LENGTH
, GFP_KERNEL
);
321 for (j
= 1; j
<= block
[0x7e]; j
++) {
322 for (i
= 0; i
< 4; i
++) {
323 if (drm_do_probe_ddc_edid(adapter
,
324 block
+ (valid_extensions
+ 1) * EDID_LENGTH
,
327 if (drm_edid_block_valid(block
+ (valid_extensions
+ 1) * EDID_LENGTH
)) {
333 dev_warn(connector
->dev
->dev
,
334 "%s: Ignoring invalid EDID block %d.\n",
335 drm_get_connector_name(connector
), j
);
338 if (valid_extensions
!= block
[0x7e]) {
339 block
[EDID_LENGTH
-1] += block
[0x7e] - valid_extensions
;
340 block
[0x7e] = valid_extensions
;
341 new = krealloc(block
, (valid_extensions
+ 1) * EDID_LENGTH
, GFP_KERNEL
);
350 dev_warn(connector
->dev
->dev
, "%s: EDID block %d invalid.\n",
351 drm_get_connector_name(connector
), j
);
359 * Probe DDC presence.
361 * \param adapter : i2c device adaptor
362 * \return 1 on success
365 drm_probe_ddc(struct i2c_adapter
*adapter
)
369 return (drm_do_probe_ddc_edid(adapter
, &out
, 0, 1) == 0);
373 * drm_get_edid - get EDID data, if available
374 * @connector: connector we're probing
375 * @adapter: i2c adapter to use for DDC
377 * Poke the given i2c channel to grab EDID data if possible. If found,
378 * attach it to the connector.
380 * Return edid data or NULL if we couldn't find any.
382 struct edid
*drm_get_edid(struct drm_connector
*connector
,
383 struct i2c_adapter
*adapter
)
385 struct edid
*edid
= NULL
;
387 if (drm_probe_ddc(adapter
))
388 edid
= (struct edid
*)drm_do_get_edid(connector
, adapter
);
390 connector
->display_info
.raw_edid
= (char *)edid
;
395 EXPORT_SYMBOL(drm_get_edid
);
397 /*** EDID parsing ***/
400 * edid_vendor - match a string against EDID's obfuscated vendor field
401 * @edid: EDID to match
402 * @vendor: vendor string
404 * Returns true if @vendor is in @edid, false otherwise
406 static bool edid_vendor(struct edid
*edid
, char *vendor
)
410 edid_vendor
[0] = ((edid
->mfg_id
[0] & 0x7c) >> 2) + '@';
411 edid_vendor
[1] = (((edid
->mfg_id
[0] & 0x3) << 3) |
412 ((edid
->mfg_id
[1] & 0xe0) >> 5)) + '@';
413 edid_vendor
[2] = (edid
->mfg_id
[1] & 0x1f) + '@';
415 return !strncmp(edid_vendor
, vendor
, 3);
419 * edid_get_quirks - return quirk flags for a given EDID
420 * @edid: EDID to process
422 * This tells subsequent routines what fixes they need to apply.
424 static u32
edid_get_quirks(struct edid
*edid
)
426 struct edid_quirk
*quirk
;
429 for (i
= 0; i
< ARRAY_SIZE(edid_quirk_list
); i
++) {
430 quirk
= &edid_quirk_list
[i
];
432 if (edid_vendor(edid
, quirk
->vendor
) &&
433 (EDID_PRODUCT_ID(edid
) == quirk
->product_id
))
434 return quirk
->quirks
;
440 #define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
441 #define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
444 * edid_fixup_preferred - set preferred modes based on quirk list
445 * @connector: has mode list to fix up
446 * @quirks: quirks list
448 * Walk the mode list for @connector, clearing the preferred status
449 * on existing modes and setting it anew for the right mode ala @quirks.
451 static void edid_fixup_preferred(struct drm_connector
*connector
,
454 struct drm_display_mode
*t
, *cur_mode
, *preferred_mode
;
455 int target_refresh
= 0;
457 if (list_empty(&connector
->probed_modes
))
460 if (quirks
& EDID_QUIRK_PREFER_LARGE_60
)
462 if (quirks
& EDID_QUIRK_PREFER_LARGE_75
)
465 preferred_mode
= list_first_entry(&connector
->probed_modes
,
466 struct drm_display_mode
, head
);
468 list_for_each_entry_safe(cur_mode
, t
, &connector
->probed_modes
, head
) {
469 cur_mode
->type
&= ~DRM_MODE_TYPE_PREFERRED
;
471 if (cur_mode
== preferred_mode
)
474 /* Largest mode is preferred */
475 if (MODE_SIZE(cur_mode
) > MODE_SIZE(preferred_mode
))
476 preferred_mode
= cur_mode
;
478 /* At a given size, try to get closest to target refresh */
479 if ((MODE_SIZE(cur_mode
) == MODE_SIZE(preferred_mode
)) &&
480 MODE_REFRESH_DIFF(cur_mode
, target_refresh
) <
481 MODE_REFRESH_DIFF(preferred_mode
, target_refresh
)) {
482 preferred_mode
= cur_mode
;
486 preferred_mode
->type
|= DRM_MODE_TYPE_PREFERRED
;
489 struct drm_display_mode
*drm_mode_find_dmt(struct drm_device
*dev
,
490 int hsize
, int vsize
, int fresh
)
492 struct drm_display_mode
*mode
= NULL
;
495 for (i
= 0; i
< drm_num_dmt_modes
; i
++) {
496 const struct drm_display_mode
*ptr
= &drm_dmt_modes
[i
];
497 if (hsize
== ptr
->hdisplay
&&
498 vsize
== ptr
->vdisplay
&&
499 fresh
== drm_mode_vrefresh(ptr
)) {
500 /* get the expected default mode */
501 mode
= drm_mode_duplicate(dev
, ptr
);
507 EXPORT_SYMBOL(drm_mode_find_dmt
);
509 typedef void detailed_cb(struct detailed_timing
*timing
, void *closure
);
512 cea_for_each_detailed_block(u8
*ext
, detailed_cb
*cb
, void *closure
)
516 u8
*det_base
= ext
+ d
;
519 for (i
= 0; i
< n
; i
++)
520 cb((struct detailed_timing
*)(det_base
+ 18 * i
), closure
);
524 vtb_for_each_detailed_block(u8
*ext
, detailed_cb
*cb
, void *closure
)
526 unsigned int i
, n
= min((int)ext
[0x02], 6);
527 u8
*det_base
= ext
+ 5;
530 return; /* unknown version */
532 for (i
= 0; i
< n
; i
++)
533 cb((struct detailed_timing
*)(det_base
+ 18 * i
), closure
);
537 drm_for_each_detailed_block(u8
*raw_edid
, detailed_cb
*cb
, void *closure
)
540 struct edid
*edid
= (struct edid
*)raw_edid
;
545 for (i
= 0; i
< EDID_DETAILED_TIMINGS
; i
++)
546 cb(&(edid
->detailed_timings
[i
]), closure
);
548 for (i
= 1; i
<= raw_edid
[0x7e]; i
++) {
549 u8
*ext
= raw_edid
+ (i
* EDID_LENGTH
);
552 cea_for_each_detailed_block(ext
, cb
, closure
);
555 vtb_for_each_detailed_block(ext
, cb
, closure
);
564 is_rb(struct detailed_timing
*t
, void *data
)
567 if (r
[3] == EDID_DETAIL_MONITOR_RANGE
)
569 *(bool *)data
= true;
572 /* EDID 1.4 defines this explicitly. For EDID 1.3, we guess, badly. */
574 drm_monitor_supports_rb(struct edid
*edid
)
576 if (edid
->revision
>= 4) {
578 drm_for_each_detailed_block((u8
*)edid
, is_rb
, &ret
);
582 return ((edid
->input
& DRM_EDID_INPUT_DIGITAL
) != 0);
586 find_gtf2(struct detailed_timing
*t
, void *data
)
589 if (r
[3] == EDID_DETAIL_MONITOR_RANGE
&& r
[10] == 0x02)
593 /* Secondary GTF curve kicks in above some break frequency */
595 drm_gtf2_hbreak(struct edid
*edid
)
598 drm_for_each_detailed_block((u8
*)edid
, find_gtf2
, &r
);
599 return r
? (r
[12] * 2) : 0;
603 drm_gtf2_2c(struct edid
*edid
)
606 drm_for_each_detailed_block((u8
*)edid
, find_gtf2
, &r
);
607 return r
? r
[13] : 0;
611 drm_gtf2_m(struct edid
*edid
)
614 drm_for_each_detailed_block((u8
*)edid
, find_gtf2
, &r
);
615 return r
? (r
[15] << 8) + r
[14] : 0;
619 drm_gtf2_k(struct edid
*edid
)
622 drm_for_each_detailed_block((u8
*)edid
, find_gtf2
, &r
);
623 return r
? r
[16] : 0;
627 drm_gtf2_2j(struct edid
*edid
)
630 drm_for_each_detailed_block((u8
*)edid
, find_gtf2
, &r
);
631 return r
? r
[17] : 0;
635 * standard_timing_level - get std. timing level(CVT/GTF/DMT)
636 * @edid: EDID block to scan
638 static int standard_timing_level(struct edid
*edid
)
640 if (edid
->revision
>= 2) {
641 if (edid
->revision
>= 4 && (edid
->features
& DRM_EDID_FEATURE_DEFAULT_GTF
))
643 if (drm_gtf2_hbreak(edid
))
651 * 0 is reserved. The spec says 0x01 fill for unused timings. Some old
652 * monitors fill with ascii space (0x20) instead.
655 bad_std_timing(u8 a
, u8 b
)
657 return (a
== 0x00 && b
== 0x00) ||
658 (a
== 0x01 && b
== 0x01) ||
659 (a
== 0x20 && b
== 0x20);
663 * drm_mode_std - convert standard mode info (width, height, refresh) into mode
664 * @t: standard timing params
665 * @timing_level: standard timing level
667 * Take the standard timing params (in this case width, aspect, and refresh)
668 * and convert them into a real mode using CVT/GTF/DMT.
670 static struct drm_display_mode
*
671 drm_mode_std(struct drm_connector
*connector
, struct edid
*edid
,
672 struct std_timing
*t
, int revision
)
674 struct drm_device
*dev
= connector
->dev
;
675 struct drm_display_mode
*m
, *mode
= NULL
;
678 unsigned aspect_ratio
= (t
->vfreq_aspect
& EDID_TIMING_ASPECT_MASK
)
679 >> EDID_TIMING_ASPECT_SHIFT
;
680 unsigned vfreq
= (t
->vfreq_aspect
& EDID_TIMING_VFREQ_MASK
)
681 >> EDID_TIMING_VFREQ_SHIFT
;
682 int timing_level
= standard_timing_level(edid
);
684 if (bad_std_timing(t
->hsize
, t
->vfreq_aspect
))
687 /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
688 hsize
= t
->hsize
* 8 + 248;
689 /* vrefresh_rate = vfreq + 60 */
690 vrefresh_rate
= vfreq
+ 60;
691 /* the vdisplay is calculated based on the aspect ratio */
692 if (aspect_ratio
== 0) {
696 vsize
= (hsize
* 10) / 16;
697 } else if (aspect_ratio
== 1)
698 vsize
= (hsize
* 3) / 4;
699 else if (aspect_ratio
== 2)
700 vsize
= (hsize
* 4) / 5;
702 vsize
= (hsize
* 9) / 16;
704 /* HDTV hack, part 1 */
705 if (vrefresh_rate
== 60 &&
706 ((hsize
== 1360 && vsize
== 765) ||
707 (hsize
== 1368 && vsize
== 769))) {
713 * If this connector already has a mode for this size and refresh
714 * rate (because it came from detailed or CVT info), use that
715 * instead. This way we don't have to guess at interlace or
718 list_for_each_entry(m
, &connector
->probed_modes
, head
)
719 if (m
->hdisplay
== hsize
&& m
->vdisplay
== vsize
&&
720 drm_mode_vrefresh(m
) == vrefresh_rate
)
723 /* HDTV hack, part 2 */
724 if (hsize
== 1366 && vsize
== 768 && vrefresh_rate
== 60) {
725 mode
= drm_cvt_mode(dev
, 1366, 768, vrefresh_rate
, 0, 0,
727 mode
->hdisplay
= 1366;
728 mode
->hsync_start
= mode
->hsync_start
- 1;
729 mode
->hsync_end
= mode
->hsync_end
- 1;
733 /* check whether it can be found in default mode table */
734 mode
= drm_mode_find_dmt(dev
, hsize
, vsize
, vrefresh_rate
);
738 switch (timing_level
) {
742 mode
= drm_gtf_mode(dev
, hsize
, vsize
, vrefresh_rate
, 0, 0);
746 * This is potentially wrong if there's ever a monitor with
747 * more than one ranges section, each claiming a different
748 * secondary GTF curve. Please don't do that.
750 mode
= drm_gtf_mode(dev
, hsize
, vsize
, vrefresh_rate
, 0, 0);
751 if (drm_mode_hsync(mode
) > drm_gtf2_hbreak(edid
)) {
752 drm_mode_destroy(dev
, mode
);
753 mode
= drm_gtf_mode_complex(dev
, hsize
, vsize
,
762 mode
= drm_cvt_mode(dev
, hsize
, vsize
, vrefresh_rate
, 0, 0,
770 * EDID is delightfully ambiguous about how interlaced modes are to be
771 * encoded. Our internal representation is of frame height, but some
772 * HDTV detailed timings are encoded as field height.
774 * The format list here is from CEA, in frame size. Technically we
775 * should be checking refresh rate too. Whatever.
778 drm_mode_do_interlace_quirk(struct drm_display_mode
*mode
,
779 struct detailed_pixel_timing
*pt
)
782 static const struct {
784 } cea_interlaced
[] = {
794 if (!(pt
->misc
& DRM_EDID_PT_INTERLACED
))
797 for (i
= 0; i
< ARRAY_SIZE(cea_interlaced
); i
++) {
798 if ((mode
->hdisplay
== cea_interlaced
[i
].w
) &&
799 (mode
->vdisplay
== cea_interlaced
[i
].h
/ 2)) {
801 mode
->vsync_start
*= 2;
802 mode
->vsync_end
*= 2;
808 mode
->flags
|= DRM_MODE_FLAG_INTERLACE
;
812 * drm_mode_detailed - create a new mode from an EDID detailed timing section
813 * @dev: DRM device (needed to create new mode)
815 * @timing: EDID detailed timing info
816 * @quirks: quirks to apply
818 * An EDID detailed timing block contains enough info for us to create and
819 * return a new struct drm_display_mode.
821 static struct drm_display_mode
*drm_mode_detailed(struct drm_device
*dev
,
823 struct detailed_timing
*timing
,
826 struct drm_display_mode
*mode
;
827 struct detailed_pixel_timing
*pt
= &timing
->data
.pixel_data
;
828 unsigned hactive
= (pt
->hactive_hblank_hi
& 0xf0) << 4 | pt
->hactive_lo
;
829 unsigned vactive
= (pt
->vactive_vblank_hi
& 0xf0) << 4 | pt
->vactive_lo
;
830 unsigned hblank
= (pt
->hactive_hblank_hi
& 0xf) << 8 | pt
->hblank_lo
;
831 unsigned vblank
= (pt
->vactive_vblank_hi
& 0xf) << 8 | pt
->vblank_lo
;
832 unsigned hsync_offset
= (pt
->hsync_vsync_offset_pulse_width_hi
& 0xc0) << 2 | pt
->hsync_offset_lo
;
833 unsigned hsync_pulse_width
= (pt
->hsync_vsync_offset_pulse_width_hi
& 0x30) << 4 | pt
->hsync_pulse_width_lo
;
834 unsigned vsync_offset
= (pt
->hsync_vsync_offset_pulse_width_hi
& 0xc) >> 2 | pt
->vsync_offset_pulse_width_lo
>> 4;
835 unsigned vsync_pulse_width
= (pt
->hsync_vsync_offset_pulse_width_hi
& 0x3) << 4 | (pt
->vsync_offset_pulse_width_lo
& 0xf);
837 /* ignore tiny modes */
838 if (hactive
< 64 || vactive
< 64)
841 if (pt
->misc
& DRM_EDID_PT_STEREO
) {
842 printk(KERN_WARNING
"stereo mode not supported\n");
845 if (!(pt
->misc
& DRM_EDID_PT_SEPARATE_SYNC
)) {
846 printk(KERN_WARNING
"composite sync not supported\n");
849 /* it is incorrect if hsync/vsync width is zero */
850 if (!hsync_pulse_width
|| !vsync_pulse_width
) {
851 DRM_DEBUG_KMS("Incorrect Detailed timing. "
852 "Wrong Hsync/Vsync pulse width\n");
855 mode
= drm_mode_create(dev
);
859 mode
->type
= DRM_MODE_TYPE_DRIVER
;
861 if (quirks
& EDID_QUIRK_135_CLOCK_TOO_HIGH
)
862 timing
->pixel_clock
= cpu_to_le16(1088);
864 mode
->clock
= le16_to_cpu(timing
->pixel_clock
) * 10;
866 mode
->hdisplay
= hactive
;
867 mode
->hsync_start
= mode
->hdisplay
+ hsync_offset
;
868 mode
->hsync_end
= mode
->hsync_start
+ hsync_pulse_width
;
869 mode
->htotal
= mode
->hdisplay
+ hblank
;
871 mode
->vdisplay
= vactive
;
872 mode
->vsync_start
= mode
->vdisplay
+ vsync_offset
;
873 mode
->vsync_end
= mode
->vsync_start
+ vsync_pulse_width
;
874 mode
->vtotal
= mode
->vdisplay
+ vblank
;
876 /* Some EDIDs have bogus h/vtotal values */
877 if (mode
->hsync_end
> mode
->htotal
)
878 mode
->htotal
= mode
->hsync_end
+ 1;
879 if (mode
->vsync_end
> mode
->vtotal
)
880 mode
->vtotal
= mode
->vsync_end
+ 1;
882 drm_mode_do_interlace_quirk(mode
, pt
);
884 drm_mode_set_name(mode
);
886 if (quirks
& EDID_QUIRK_DETAILED_SYNC_PP
) {
887 pt
->misc
|= DRM_EDID_PT_HSYNC_POSITIVE
| DRM_EDID_PT_VSYNC_POSITIVE
;
890 mode
->flags
|= (pt
->misc
& DRM_EDID_PT_HSYNC_POSITIVE
) ?
891 DRM_MODE_FLAG_PHSYNC
: DRM_MODE_FLAG_NHSYNC
;
892 mode
->flags
|= (pt
->misc
& DRM_EDID_PT_VSYNC_POSITIVE
) ?
893 DRM_MODE_FLAG_PVSYNC
: DRM_MODE_FLAG_NVSYNC
;
895 mode
->width_mm
= pt
->width_mm_lo
| (pt
->width_height_mm_hi
& 0xf0) << 4;
896 mode
->height_mm
= pt
->height_mm_lo
| (pt
->width_height_mm_hi
& 0xf) << 8;
898 if (quirks
& EDID_QUIRK_DETAILED_IN_CM
) {
899 mode
->width_mm
*= 10;
900 mode
->height_mm
*= 10;
903 if (quirks
& EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE
) {
904 mode
->width_mm
= edid
->width_cm
* 10;
905 mode
->height_mm
= edid
->height_cm
* 10;
912 mode_is_rb(const struct drm_display_mode
*mode
)
914 return (mode
->htotal
- mode
->hdisplay
== 160) &&
915 (mode
->hsync_end
- mode
->hdisplay
== 80) &&
916 (mode
->hsync_end
- mode
->hsync_start
== 32) &&
917 (mode
->vsync_start
- mode
->vdisplay
== 3);
921 mode_in_hsync_range(const struct drm_display_mode
*mode
,
922 struct edid
*edid
, u8
*t
)
924 int hsync
, hmin
, hmax
;
927 if (edid
->revision
>= 4)
928 hmin
+= ((t
[4] & 0x04) ? 255 : 0);
930 if (edid
->revision
>= 4)
931 hmax
+= ((t
[4] & 0x08) ? 255 : 0);
932 hsync
= drm_mode_hsync(mode
);
934 return (hsync
<= hmax
&& hsync
>= hmin
);
938 mode_in_vsync_range(const struct drm_display_mode
*mode
,
939 struct edid
*edid
, u8
*t
)
941 int vsync
, vmin
, vmax
;
944 if (edid
->revision
>= 4)
945 vmin
+= ((t
[4] & 0x01) ? 255 : 0);
947 if (edid
->revision
>= 4)
948 vmax
+= ((t
[4] & 0x02) ? 255 : 0);
949 vsync
= drm_mode_vrefresh(mode
);
951 return (vsync
<= vmax
&& vsync
>= vmin
);
955 range_pixel_clock(struct edid
*edid
, u8
*t
)
958 if (t
[9] == 0 || t
[9] == 255)
961 /* 1.4 with CVT support gives us real precision, yay */
962 if (edid
->revision
>= 4 && t
[10] == 0x04)
963 return (t
[9] * 10000) - ((t
[12] >> 2) * 250);
965 /* 1.3 is pathetic, so fuzz up a bit */
966 return t
[9] * 10000 + 5001;
970 mode_in_range(const struct drm_display_mode
*mode
, struct edid
*edid
,
971 struct detailed_timing
*timing
)
974 u8
*t
= (u8
*)timing
;
976 if (!mode_in_hsync_range(mode
, edid
, t
))
979 if (!mode_in_vsync_range(mode
, edid
, t
))
982 if ((max_clock
= range_pixel_clock(edid
, t
)))
983 if (mode
->clock
> max_clock
)
986 /* 1.4 max horizontal check */
987 if (edid
->revision
>= 4 && t
[10] == 0x04)
988 if (t
[13] && mode
->hdisplay
> 8 * (t
[13] + (256 * (t
[12]&0x3))))
991 if (mode_is_rb(mode
) && !drm_monitor_supports_rb(edid
))
998 * XXX If drm_dmt_modes ever regrows the CVT-R modes (and it will) this will
999 * need to account for them.
1002 drm_gtf_modes_for_range(struct drm_connector
*connector
, struct edid
*edid
,
1003 struct detailed_timing
*timing
)
1006 struct drm_display_mode
*newmode
;
1007 struct drm_device
*dev
= connector
->dev
;
1009 for (i
= 0; i
< drm_num_dmt_modes
; i
++) {
1010 if (mode_in_range(drm_dmt_modes
+ i
, edid
, timing
)) {
1011 newmode
= drm_mode_duplicate(dev
, &drm_dmt_modes
[i
]);
1013 drm_mode_probed_add(connector
, newmode
);
1023 do_inferred_modes(struct detailed_timing
*timing
, void *c
)
1025 struct detailed_mode_closure
*closure
= c
;
1026 struct detailed_non_pixel
*data
= &timing
->data
.other_data
;
1027 int gtf
= (closure
->edid
->features
& DRM_EDID_FEATURE_DEFAULT_GTF
);
1029 if (gtf
&& data
->type
== EDID_DETAIL_MONITOR_RANGE
)
1030 closure
->modes
+= drm_gtf_modes_for_range(closure
->connector
,
1036 add_inferred_modes(struct drm_connector
*connector
, struct edid
*edid
)
1038 struct detailed_mode_closure closure
= {
1039 connector
, edid
, 0, 0, 0
1042 if (version_greater(edid
, 1, 0))
1043 drm_for_each_detailed_block((u8
*)edid
, do_inferred_modes
,
1046 return closure
.modes
;
1050 drm_est3_modes(struct drm_connector
*connector
, struct detailed_timing
*timing
)
1052 int i
, j
, m
, modes
= 0;
1053 struct drm_display_mode
*mode
;
1054 u8
*est
= ((u8
*)timing
) + 5;
1056 for (i
= 0; i
< 6; i
++) {
1057 for (j
= 7; j
> 0; j
--) {
1058 m
= (i
* 8) + (7 - j
);
1059 if (m
>= ARRAY_SIZE(est3_modes
))
1061 if (est
[i
] & (1 << j
)) {
1062 mode
= drm_mode_find_dmt(connector
->dev
,
1066 /*, est3_modes[m].rb */);
1068 drm_mode_probed_add(connector
, mode
);
1079 do_established_modes(struct detailed_timing
*timing
, void *c
)
1081 struct detailed_mode_closure
*closure
= c
;
1082 struct detailed_non_pixel
*data
= &timing
->data
.other_data
;
1084 if (data
->type
== EDID_DETAIL_EST_TIMINGS
)
1085 closure
->modes
+= drm_est3_modes(closure
->connector
, timing
);
1089 * add_established_modes - get est. modes from EDID and add them
1090 * @edid: EDID block to scan
1092 * Each EDID block contains a bitmap of the supported "established modes" list
1093 * (defined above). Tease them out and add them to the global modes list.
1096 add_established_modes(struct drm_connector
*connector
, struct edid
*edid
)
1098 struct drm_device
*dev
= connector
->dev
;
1099 unsigned long est_bits
= edid
->established_timings
.t1
|
1100 (edid
->established_timings
.t2
<< 8) |
1101 ((edid
->established_timings
.mfg_rsvd
& 0x80) << 9);
1103 struct detailed_mode_closure closure
= {
1104 connector
, edid
, 0, 0, 0
1107 for (i
= 0; i
<= EDID_EST_TIMINGS
; i
++) {
1108 if (est_bits
& (1<<i
)) {
1109 struct drm_display_mode
*newmode
;
1110 newmode
= drm_mode_duplicate(dev
, &edid_est_modes
[i
]);
1112 drm_mode_probed_add(connector
, newmode
);
1118 if (version_greater(edid
, 1, 0))
1119 drm_for_each_detailed_block((u8
*)edid
,
1120 do_established_modes
, &closure
);
1122 return modes
+ closure
.modes
;
1126 do_standard_modes(struct detailed_timing
*timing
, void *c
)
1128 struct detailed_mode_closure
*closure
= c
;
1129 struct detailed_non_pixel
*data
= &timing
->data
.other_data
;
1130 struct drm_connector
*connector
= closure
->connector
;
1131 struct edid
*edid
= closure
->edid
;
1133 if (data
->type
== EDID_DETAIL_STD_MODES
) {
1135 for (i
= 0; i
< 6; i
++) {
1136 struct std_timing
*std
;
1137 struct drm_display_mode
*newmode
;
1139 std
= &data
->data
.timings
[i
];
1140 newmode
= drm_mode_std(connector
, edid
, std
,
1143 drm_mode_probed_add(connector
, newmode
);
1151 * add_standard_modes - get std. modes from EDID and add them
1152 * @edid: EDID block to scan
1154 * Standard modes can be calculated using the appropriate standard (DMT,
1155 * GTF or CVT. Grab them from @edid and add them to the list.
1158 add_standard_modes(struct drm_connector
*connector
, struct edid
*edid
)
1161 struct detailed_mode_closure closure
= {
1162 connector
, edid
, 0, 0, 0
1165 for (i
= 0; i
< EDID_STD_TIMINGS
; i
++) {
1166 struct drm_display_mode
*newmode
;
1168 newmode
= drm_mode_std(connector
, edid
,
1169 &edid
->standard_timings
[i
],
1172 drm_mode_probed_add(connector
, newmode
);
1177 if (version_greater(edid
, 1, 0))
1178 drm_for_each_detailed_block((u8
*)edid
, do_standard_modes
,
1181 /* XXX should also look for standard codes in VTB blocks */
1183 return modes
+ closure
.modes
;
1186 static int drm_cvt_modes(struct drm_connector
*connector
,
1187 struct detailed_timing
*timing
)
1189 int i
, j
, modes
= 0;
1190 struct drm_display_mode
*newmode
;
1191 struct drm_device
*dev
= connector
->dev
;
1192 struct cvt_timing
*cvt
;
1193 const int rates
[] = { 60, 85, 75, 60, 50 };
1194 const u8 empty
[3] = { 0, 0, 0 };
1196 for (i
= 0; i
< 4; i
++) {
1197 int uninitialized_var(width
), height
;
1198 cvt
= &(timing
->data
.other_data
.data
.cvt
[i
]);
1200 if (!memcmp(cvt
->code
, empty
, 3))
1203 height
= (cvt
->code
[0] + ((cvt
->code
[1] & 0xf0) << 4) + 1) * 2;
1204 switch (cvt
->code
[1] & 0x0c) {
1206 width
= height
* 4 / 3;
1209 width
= height
* 16 / 9;
1212 width
= height
* 16 / 10;
1215 width
= height
* 15 / 9;
1219 for (j
= 1; j
< 5; j
++) {
1220 if (cvt
->code
[2] & (1 << j
)) {
1221 newmode
= drm_cvt_mode(dev
, width
, height
,
1225 drm_mode_probed_add(connector
, newmode
);
1236 do_cvt_mode(struct detailed_timing
*timing
, void *c
)
1238 struct detailed_mode_closure
*closure
= c
;
1239 struct detailed_non_pixel
*data
= &timing
->data
.other_data
;
1241 if (data
->type
== EDID_DETAIL_CVT_3BYTE
)
1242 closure
->modes
+= drm_cvt_modes(closure
->connector
, timing
);
1246 add_cvt_modes(struct drm_connector
*connector
, struct edid
*edid
)
1248 struct detailed_mode_closure closure
= {
1249 connector
, edid
, 0, 0, 0
1252 if (version_greater(edid
, 1, 2))
1253 drm_for_each_detailed_block((u8
*)edid
, do_cvt_mode
, &closure
);
1255 /* XXX should also look for CVT codes in VTB blocks */
1257 return closure
.modes
;
1261 do_detailed_mode(struct detailed_timing
*timing
, void *c
)
1263 struct detailed_mode_closure
*closure
= c
;
1264 struct drm_display_mode
*newmode
;
1266 if (timing
->pixel_clock
) {
1267 newmode
= drm_mode_detailed(closure
->connector
->dev
,
1268 closure
->edid
, timing
,
1273 if (closure
->preferred
)
1274 newmode
->type
|= DRM_MODE_TYPE_PREFERRED
;
1276 drm_mode_probed_add(closure
->connector
, newmode
);
1278 closure
->preferred
= 0;
1283 * add_detailed_modes - Add modes from detailed timings
1284 * @connector: attached connector
1285 * @edid: EDID block to scan
1286 * @quirks: quirks to apply
1289 add_detailed_modes(struct drm_connector
*connector
, struct edid
*edid
,
1292 struct detailed_mode_closure closure
= {
1300 if (closure
.preferred
&& !version_greater(edid
, 1, 3))
1302 (edid
->features
& DRM_EDID_FEATURE_PREFERRED_TIMING
);
1304 drm_for_each_detailed_block((u8
*)edid
, do_detailed_mode
, &closure
);
1306 return closure
.modes
;
1309 #define HDMI_IDENTIFIER 0x000C03
1310 #define AUDIO_BLOCK 0x01
1311 #define VIDEO_BLOCK 0x02
1312 #define VENDOR_BLOCK 0x03
1313 #define SPEAKER_BLOCK 0x04
1314 #define EDID_BASIC_AUDIO (1 << 6)
1317 * Search EDID for CEA extension block.
1319 u8
*drm_find_cea_extension(struct edid
*edid
)
1321 u8
*edid_ext
= NULL
;
1324 /* No EDID or EDID extensions */
1325 if (edid
== NULL
|| edid
->extensions
== 0)
1328 /* Find CEA extension */
1329 for (i
= 0; i
< edid
->extensions
; i
++) {
1330 edid_ext
= (u8
*)edid
+ EDID_LENGTH
* (i
+ 1);
1331 if (edid_ext
[0] == CEA_EXT
)
1335 if (i
== edid
->extensions
)
1340 EXPORT_SYMBOL(drm_find_cea_extension
);
1343 do_cea_modes (struct drm_connector
*connector
, u8
*db
, u8 len
)
1345 struct drm_device
*dev
= connector
->dev
;
1346 u8
* mode
, cea_mode
;
1349 for (mode
= db
; mode
< db
+ len
; mode
++) {
1350 cea_mode
= (*mode
& 127) - 1; /* CEA modes are numbered 1..127 */
1351 if (cea_mode
< drm_num_cea_modes
) {
1352 struct drm_display_mode
*newmode
;
1353 newmode
= drm_mode_duplicate(dev
,
1354 &edid_cea_modes
[cea_mode
]);
1356 drm_mode_probed_add(connector
, newmode
);
1366 add_cea_modes(struct drm_connector
*connector
, struct edid
*edid
)
1368 u8
* cea
= drm_find_cea_extension(edid
);
1372 if (cea
&& cea
[1] >= 3) {
1373 for (db
= cea
+ 4; db
< cea
+ cea
[2]; db
+= dbl
+ 1) {
1375 if (((db
[0] & 0xe0) >> 5) == VIDEO_BLOCK
)
1376 modes
+= do_cea_modes (connector
, db
+1, dbl
);
1384 parse_hdmi_vsdb(struct drm_connector
*connector
, uint8_t *db
)
1386 connector
->eld
[5] |= (db
[6] >> 7) << 1; /* Supports_AI */
1388 connector
->dvi_dual
= db
[6] & 1;
1389 connector
->max_tmds_clock
= db
[7] * 5;
1391 connector
->latency_present
[0] = db
[8] >> 7;
1392 connector
->latency_present
[1] = (db
[8] >> 6) & 1;
1393 connector
->video_latency
[0] = db
[9];
1394 connector
->audio_latency
[0] = db
[10];
1395 connector
->video_latency
[1] = db
[11];
1396 connector
->audio_latency
[1] = db
[12];
1398 DRM_LOG_KMS("HDMI: DVI dual %d, "
1399 "max TMDS clock %d, "
1400 "latency present %d %d, "
1401 "video latency %d %d, "
1402 "audio latency %d %d\n",
1403 connector
->dvi_dual
,
1404 connector
->max_tmds_clock
,
1405 (int) connector
->latency_present
[0],
1406 (int) connector
->latency_present
[1],
1407 connector
->video_latency
[0],
1408 connector
->video_latency
[1],
1409 connector
->audio_latency
[0],
1410 connector
->audio_latency
[1]);
1414 monitor_name(struct detailed_timing
*t
, void *data
)
1416 if (t
->data
.other_data
.type
== EDID_DETAIL_MONITOR_NAME
)
1417 *(u8
**)data
= t
->data
.other_data
.data
.str
.str
;
1421 * drm_edid_to_eld - build ELD from EDID
1422 * @connector: connector corresponding to the HDMI/DP sink
1423 * @edid: EDID to parse
1425 * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
1426 * Some ELD fields are left to the graphics driver caller:
1431 void drm_edid_to_eld(struct drm_connector
*connector
, struct edid
*edid
)
1433 uint8_t *eld
= connector
->eld
;
1441 memset(eld
, 0, sizeof(connector
->eld
));
1443 cea
= drm_find_cea_extension(edid
);
1445 DRM_DEBUG_KMS("ELD: no CEA Extension found\n");
1450 drm_for_each_detailed_block((u8
*)edid
, monitor_name
, &name
);
1451 for (mnl
= 0; name
&& mnl
< 13; mnl
++) {
1452 if (name
[mnl
] == 0x0a)
1454 eld
[20 + mnl
] = name
[mnl
];
1456 eld
[4] = (cea
[1] << 5) | mnl
;
1457 DRM_DEBUG_KMS("ELD monitor %s\n", eld
+ 20);
1459 eld
[0] = 2 << 3; /* ELD version: 2 */
1461 eld
[16] = edid
->mfg_id
[0];
1462 eld
[17] = edid
->mfg_id
[1];
1463 eld
[18] = edid
->prod_code
[0];
1464 eld
[19] = edid
->prod_code
[1];
1467 for (db
= cea
+ 4; db
< cea
+ cea
[2]; db
+= dbl
+ 1) {
1470 switch ((db
[0] & 0xe0) >> 5) {
1472 /* Audio Data Block, contains SADs */
1473 sad_count
= dbl
/ 3;
1474 memcpy(eld
+ 20 + mnl
, &db
[1], dbl
);
1477 /* Speaker Allocation Data Block */
1481 /* HDMI Vendor-Specific Data Block */
1482 if (db
[1] == 0x03 && db
[2] == 0x0c && db
[3] == 0)
1483 parse_hdmi_vsdb(connector
, db
);
1489 eld
[5] |= sad_count
<< 4;
1490 eld
[2] = (20 + mnl
+ sad_count
* 3 + 3) / 4;
1492 DRM_DEBUG_KMS("ELD size %d, SAD count %d\n", (int)eld
[2], sad_count
);
1494 EXPORT_SYMBOL(drm_edid_to_eld
);
1497 * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
1498 * @connector: connector associated with the HDMI/DP sink
1499 * @mode: the display mode
1501 int drm_av_sync_delay(struct drm_connector
*connector
,
1502 struct drm_display_mode
*mode
)
1504 int i
= !!(mode
->flags
& DRM_MODE_FLAG_INTERLACE
);
1507 if (!connector
->latency_present
[0])
1509 if (!connector
->latency_present
[1])
1512 a
= connector
->audio_latency
[i
];
1513 v
= connector
->video_latency
[i
];
1516 * HDMI/DP sink doesn't support audio or video?
1518 if (a
== 255 || v
== 255)
1522 * Convert raw EDID values to millisecond.
1523 * Treat unknown latency as 0ms.
1526 a
= min(2 * (a
- 1), 500);
1528 v
= min(2 * (v
- 1), 500);
1530 return max(v
- a
, 0);
1532 EXPORT_SYMBOL(drm_av_sync_delay
);
1535 * drm_select_eld - select one ELD from multiple HDMI/DP sinks
1536 * @encoder: the encoder just changed display mode
1537 * @mode: the adjusted display mode
1539 * It's possible for one encoder to be associated with multiple HDMI/DP sinks.
1540 * The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
1542 struct drm_connector
*drm_select_eld(struct drm_encoder
*encoder
,
1543 struct drm_display_mode
*mode
)
1545 struct drm_connector
*connector
;
1546 struct drm_device
*dev
= encoder
->dev
;
1548 list_for_each_entry(connector
, &dev
->mode_config
.connector_list
, head
)
1549 if (connector
->encoder
== encoder
&& connector
->eld
[0])
1554 EXPORT_SYMBOL(drm_select_eld
);
1557 * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
1558 * @edid: monitor EDID information
1560 * Parse the CEA extension according to CEA-861-B.
1561 * Return true if HDMI, false if not or unknown.
1563 bool drm_detect_hdmi_monitor(struct edid
*edid
)
1567 int start_offset
, end_offset
;
1568 bool is_hdmi
= false;
1570 edid_ext
= drm_find_cea_extension(edid
);
1574 /* Data block offset in CEA extension block */
1576 end_offset
= edid_ext
[2];
1579 * Because HDMI identifier is in Vendor Specific Block,
1580 * search it from all data blocks of CEA extension.
1582 for (i
= start_offset
; i
< end_offset
;
1583 /* Increased by data block len */
1584 i
+= ((edid_ext
[i
] & 0x1f) + 1)) {
1585 /* Find vendor specific block */
1586 if ((edid_ext
[i
] >> 5) == VENDOR_BLOCK
) {
1587 hdmi_id
= edid_ext
[i
+ 1] | (edid_ext
[i
+ 2] << 8) |
1588 edid_ext
[i
+ 3] << 16;
1589 /* Find HDMI identifier */
1590 if (hdmi_id
== HDMI_IDENTIFIER
)
1599 EXPORT_SYMBOL(drm_detect_hdmi_monitor
);
1602 * drm_detect_monitor_audio - check monitor audio capability
1604 * Monitor should have CEA extension block.
1605 * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic
1606 * audio' only. If there is any audio extension block and supported
1607 * audio format, assume at least 'basic audio' support, even if 'basic
1608 * audio' is not defined in EDID.
1611 bool drm_detect_monitor_audio(struct edid
*edid
)
1615 bool has_audio
= false;
1616 int start_offset
, end_offset
;
1618 edid_ext
= drm_find_cea_extension(edid
);
1622 has_audio
= ((edid_ext
[3] & EDID_BASIC_AUDIO
) != 0);
1625 DRM_DEBUG_KMS("Monitor has basic audio support\n");
1629 /* Data block offset in CEA extension block */
1631 end_offset
= edid_ext
[2];
1633 for (i
= start_offset
; i
< end_offset
;
1634 i
+= ((edid_ext
[i
] & 0x1f) + 1)) {
1635 if ((edid_ext
[i
] >> 5) == AUDIO_BLOCK
) {
1637 for (j
= 1; j
< (edid_ext
[i
] & 0x1f); j
+= 3)
1638 DRM_DEBUG_KMS("CEA audio format %d\n",
1639 (edid_ext
[i
+ j
] >> 3) & 0xf);
1646 EXPORT_SYMBOL(drm_detect_monitor_audio
);
1649 * drm_add_display_info - pull display info out if present
1651 * @info: display info (attached to connector)
1653 * Grab any available display info and stuff it into the drm_display_info
1654 * structure that's part of the connector. Useful for tracking bpp and
1657 static void drm_add_display_info(struct edid
*edid
,
1658 struct drm_display_info
*info
)
1662 info
->width_mm
= edid
->width_cm
* 10;
1663 info
->height_mm
= edid
->height_cm
* 10;
1665 /* driver figures it out in this case */
1667 info
->color_formats
= 0;
1669 /* Only defined for 1.4 with digital displays */
1670 if (edid
->revision
< 4)
1673 if (!(edid
->input
& DRM_EDID_INPUT_DIGITAL
))
1676 switch (edid
->input
& DRM_EDID_DIGITAL_DEPTH_MASK
) {
1677 case DRM_EDID_DIGITAL_DEPTH_6
:
1680 case DRM_EDID_DIGITAL_DEPTH_8
:
1683 case DRM_EDID_DIGITAL_DEPTH_10
:
1686 case DRM_EDID_DIGITAL_DEPTH_12
:
1689 case DRM_EDID_DIGITAL_DEPTH_14
:
1692 case DRM_EDID_DIGITAL_DEPTH_16
:
1695 case DRM_EDID_DIGITAL_DEPTH_UNDEF
:
1701 info
->color_formats
= DRM_COLOR_FORMAT_RGB444
;
1702 if (info
->color_formats
& DRM_EDID_FEATURE_RGB_YCRCB444
)
1703 info
->color_formats
= DRM_COLOR_FORMAT_YCRCB444
;
1704 if (info
->color_formats
& DRM_EDID_FEATURE_RGB_YCRCB422
)
1705 info
->color_formats
= DRM_COLOR_FORMAT_YCRCB422
;
1707 /* Get data from CEA blocks if present */
1708 edid_ext
= drm_find_cea_extension(edid
);
1712 info
->cea_rev
= edid_ext
[1];
1716 * drm_add_edid_modes - add modes from EDID data, if available
1717 * @connector: connector we're probing
1720 * Add the specified modes to the connector's mode list.
1722 * Return number of modes added or 0 if we couldn't find any.
1724 int drm_add_edid_modes(struct drm_connector
*connector
, struct edid
*edid
)
1732 if (!drm_edid_is_valid(edid
)) {
1733 dev_warn(connector
->dev
->dev
, "%s: EDID invalid.\n",
1734 drm_get_connector_name(connector
));
1738 quirks
= edid_get_quirks(edid
);
1741 * EDID spec says modes should be preferred in this order:
1742 * - preferred detailed mode
1743 * - other detailed modes from base block
1744 * - detailed modes from extension blocks
1745 * - CVT 3-byte code modes
1746 * - standard timing codes
1747 * - established timing codes
1748 * - modes inferred from GTF or CVT range information
1750 * We get this pretty much right.
1752 * XXX order for additional mode types in extension blocks?
1754 num_modes
+= add_detailed_modes(connector
, edid
, quirks
);
1755 num_modes
+= add_cvt_modes(connector
, edid
);
1756 num_modes
+= add_standard_modes(connector
, edid
);
1757 num_modes
+= add_established_modes(connector
, edid
);
1758 num_modes
+= add_inferred_modes(connector
, edid
);
1759 num_modes
+= add_cea_modes(connector
, edid
);
1761 if (quirks
& (EDID_QUIRK_PREFER_LARGE_60
| EDID_QUIRK_PREFER_LARGE_75
))
1762 edid_fixup_preferred(connector
, quirks
);
1764 drm_add_display_info(edid
, &connector
->display_info
);
1768 EXPORT_SYMBOL(drm_add_edid_modes
);
1771 * drm_add_modes_noedid - add modes for the connectors without EDID
1772 * @connector: connector we're probing
1773 * @hdisplay: the horizontal display limit
1774 * @vdisplay: the vertical display limit
1776 * Add the specified modes to the connector's mode list. Only when the
1777 * hdisplay/vdisplay is not beyond the given limit, it will be added.
1779 * Return number of modes added or 0 if we couldn't find any.
1781 int drm_add_modes_noedid(struct drm_connector
*connector
,
1782 int hdisplay
, int vdisplay
)
1784 int i
, count
, num_modes
= 0;
1785 struct drm_display_mode
*mode
;
1786 struct drm_device
*dev
= connector
->dev
;
1788 count
= sizeof(drm_dmt_modes
) / sizeof(struct drm_display_mode
);
1794 for (i
= 0; i
< count
; i
++) {
1795 const struct drm_display_mode
*ptr
= &drm_dmt_modes
[i
];
1796 if (hdisplay
&& vdisplay
) {
1798 * Only when two are valid, they will be used to check
1799 * whether the mode should be added to the mode list of
1802 if (ptr
->hdisplay
> hdisplay
||
1803 ptr
->vdisplay
> vdisplay
)
1806 if (drm_mode_vrefresh(ptr
) > 61)
1808 mode
= drm_mode_duplicate(dev
, ptr
);
1810 drm_mode_probed_add(connector
, mode
);
1816 EXPORT_SYMBOL(drm_add_modes_noedid
);