drm/i915: add initial Runtime PM functions
[deliverable/linux.git] / drivers / gpu / drm / i915 / i915_drv.c
1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
2 */
3 /*
4 *
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
6 * All Rights Reserved.
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
15 *
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
18 * of the Software.
19 *
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27 *
28 */
29
30 #include <linux/device.h>
31 #include <drm/drmP.h>
32 #include <drm/i915_drm.h>
33 #include "i915_drv.h"
34 #include "i915_trace.h"
35 #include "intel_drv.h"
36
37 #include <linux/console.h>
38 #include <linux/module.h>
39 #include <drm/drm_crtc_helper.h>
40
41 static int i915_modeset __read_mostly = -1;
42 module_param_named(modeset, i915_modeset, int, 0400);
43 MODULE_PARM_DESC(modeset,
44 "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
45 "1=on, -1=force vga console preference [default])");
46
47 unsigned int i915_fbpercrtc __always_unused = 0;
48 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
49
50 int i915_panel_ignore_lid __read_mostly = 1;
51 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
52 MODULE_PARM_DESC(panel_ignore_lid,
53 "Override lid status (0=autodetect, 1=autodetect disabled [default], "
54 "-1=force lid closed, -2=force lid open)");
55
56 unsigned int i915_powersave __read_mostly = 1;
57 module_param_named(powersave, i915_powersave, int, 0600);
58 MODULE_PARM_DESC(powersave,
59 "Enable powersavings, fbc, downclocking, etc. (default: true)");
60
61 int i915_semaphores __read_mostly = -1;
62 module_param_named(semaphores, i915_semaphores, int, 0600);
63 MODULE_PARM_DESC(semaphores,
64 "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
65
66 int i915_enable_rc6 __read_mostly = -1;
67 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
68 MODULE_PARM_DESC(i915_enable_rc6,
69 "Enable power-saving render C-state 6. "
70 "Different stages can be selected via bitmask values "
71 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
72 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
73 "default: -1 (use per-chip default)");
74
75 int i915_enable_fbc __read_mostly = -1;
76 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
77 MODULE_PARM_DESC(i915_enable_fbc,
78 "Enable frame buffer compression for power savings "
79 "(default: -1 (use per-chip default))");
80
81 unsigned int i915_lvds_downclock __read_mostly = 0;
82 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
83 MODULE_PARM_DESC(lvds_downclock,
84 "Use panel (LVDS/eDP) downclocking for power savings "
85 "(default: false)");
86
87 int i915_lvds_channel_mode __read_mostly;
88 module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
89 MODULE_PARM_DESC(lvds_channel_mode,
90 "Specify LVDS channel mode "
91 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
92
93 int i915_panel_use_ssc __read_mostly = -1;
94 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
95 MODULE_PARM_DESC(lvds_use_ssc,
96 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
97 "(default: auto from VBT)");
98
99 int i915_vbt_sdvo_panel_type __read_mostly = -1;
100 module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
101 MODULE_PARM_DESC(vbt_sdvo_panel_type,
102 "Override/Ignore selection of SDVO panel mode in the VBT "
103 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
104
105 static bool i915_try_reset __read_mostly = true;
106 module_param_named(reset, i915_try_reset, bool, 0600);
107 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
108
109 bool i915_enable_hangcheck __read_mostly = true;
110 module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
111 MODULE_PARM_DESC(enable_hangcheck,
112 "Periodically check GPU activity for detecting hangs. "
113 "WARNING: Disabling this can cause system wide hangs. "
114 "(default: true)");
115
116 int i915_enable_ppgtt __read_mostly = -1;
117 module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0400);
118 MODULE_PARM_DESC(i915_enable_ppgtt,
119 "Enable PPGTT (default: true)");
120
121 int i915_enable_psr __read_mostly = 0;
122 module_param_named(enable_psr, i915_enable_psr, int, 0600);
123 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
124
125 unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
126 module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
127 MODULE_PARM_DESC(preliminary_hw_support,
128 "Enable preliminary hardware support.");
129
130 int i915_disable_power_well __read_mostly = 1;
131 module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
132 MODULE_PARM_DESC(disable_power_well,
133 "Disable the power well when possible (default: true)");
134
135 int i915_enable_ips __read_mostly = 1;
136 module_param_named(enable_ips, i915_enable_ips, int, 0600);
137 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
138
139 bool i915_fastboot __read_mostly = 0;
140 module_param_named(fastboot, i915_fastboot, bool, 0600);
141 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
142 "(default: false)");
143
144 int i915_enable_pc8 __read_mostly = 1;
145 module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
146 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
147
148 int i915_pc8_timeout __read_mostly = 5000;
149 module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
150 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
151
152 bool i915_prefault_disable __read_mostly;
153 module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
154 MODULE_PARM_DESC(prefault_disable,
155 "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
156
157 static struct drm_driver driver;
158
159 static const struct intel_device_info intel_i830_info = {
160 .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
161 .has_overlay = 1, .overlay_needs_physical = 1,
162 .ring_mask = RENDER_RING,
163 };
164
165 static const struct intel_device_info intel_845g_info = {
166 .gen = 2, .num_pipes = 1,
167 .has_overlay = 1, .overlay_needs_physical = 1,
168 .ring_mask = RENDER_RING,
169 };
170
171 static const struct intel_device_info intel_i85x_info = {
172 .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
173 .cursor_needs_physical = 1,
174 .has_overlay = 1, .overlay_needs_physical = 1,
175 .ring_mask = RENDER_RING,
176 };
177
178 static const struct intel_device_info intel_i865g_info = {
179 .gen = 2, .num_pipes = 1,
180 .has_overlay = 1, .overlay_needs_physical = 1,
181 .ring_mask = RENDER_RING,
182 };
183
184 static const struct intel_device_info intel_i915g_info = {
185 .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
186 .has_overlay = 1, .overlay_needs_physical = 1,
187 .ring_mask = RENDER_RING,
188 };
189 static const struct intel_device_info intel_i915gm_info = {
190 .gen = 3, .is_mobile = 1, .num_pipes = 2,
191 .cursor_needs_physical = 1,
192 .has_overlay = 1, .overlay_needs_physical = 1,
193 .supports_tv = 1,
194 .ring_mask = RENDER_RING,
195 };
196 static const struct intel_device_info intel_i945g_info = {
197 .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
198 .has_overlay = 1, .overlay_needs_physical = 1,
199 .ring_mask = RENDER_RING,
200 };
201 static const struct intel_device_info intel_i945gm_info = {
202 .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
203 .has_hotplug = 1, .cursor_needs_physical = 1,
204 .has_overlay = 1, .overlay_needs_physical = 1,
205 .supports_tv = 1,
206 .ring_mask = RENDER_RING,
207 };
208
209 static const struct intel_device_info intel_i965g_info = {
210 .gen = 4, .is_broadwater = 1, .num_pipes = 2,
211 .has_hotplug = 1,
212 .has_overlay = 1,
213 .ring_mask = RENDER_RING,
214 };
215
216 static const struct intel_device_info intel_i965gm_info = {
217 .gen = 4, .is_crestline = 1, .num_pipes = 2,
218 .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
219 .has_overlay = 1,
220 .supports_tv = 1,
221 .ring_mask = RENDER_RING,
222 };
223
224 static const struct intel_device_info intel_g33_info = {
225 .gen = 3, .is_g33 = 1, .num_pipes = 2,
226 .need_gfx_hws = 1, .has_hotplug = 1,
227 .has_overlay = 1,
228 .ring_mask = RENDER_RING,
229 };
230
231 static const struct intel_device_info intel_g45_info = {
232 .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
233 .has_pipe_cxsr = 1, .has_hotplug = 1,
234 .ring_mask = RENDER_RING | BSD_RING,
235 };
236
237 static const struct intel_device_info intel_gm45_info = {
238 .gen = 4, .is_g4x = 1, .num_pipes = 2,
239 .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
240 .has_pipe_cxsr = 1, .has_hotplug = 1,
241 .supports_tv = 1,
242 .ring_mask = RENDER_RING | BSD_RING,
243 };
244
245 static const struct intel_device_info intel_pineview_info = {
246 .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
247 .need_gfx_hws = 1, .has_hotplug = 1,
248 .has_overlay = 1,
249 };
250
251 static const struct intel_device_info intel_ironlake_d_info = {
252 .gen = 5, .num_pipes = 2,
253 .need_gfx_hws = 1, .has_hotplug = 1,
254 .ring_mask = RENDER_RING | BSD_RING,
255 };
256
257 static const struct intel_device_info intel_ironlake_m_info = {
258 .gen = 5, .is_mobile = 1, .num_pipes = 2,
259 .need_gfx_hws = 1, .has_hotplug = 1,
260 .has_fbc = 1,
261 .ring_mask = RENDER_RING | BSD_RING,
262 };
263
264 static const struct intel_device_info intel_sandybridge_d_info = {
265 .gen = 6, .num_pipes = 2,
266 .need_gfx_hws = 1, .has_hotplug = 1,
267 .has_fbc = 1,
268 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
269 .has_llc = 1,
270 };
271
272 static const struct intel_device_info intel_sandybridge_m_info = {
273 .gen = 6, .is_mobile = 1, .num_pipes = 2,
274 .need_gfx_hws = 1, .has_hotplug = 1,
275 .has_fbc = 1,
276 .ring_mask = RENDER_RING | BSD_RING | BLT_RING,
277 .has_llc = 1,
278 };
279
280 #define GEN7_FEATURES \
281 .gen = 7, .num_pipes = 3, \
282 .need_gfx_hws = 1, .has_hotplug = 1, \
283 .has_fbc = 1, \
284 .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
285 .has_llc = 1
286
287 static const struct intel_device_info intel_ivybridge_d_info = {
288 GEN7_FEATURES,
289 .is_ivybridge = 1,
290 };
291
292 static const struct intel_device_info intel_ivybridge_m_info = {
293 GEN7_FEATURES,
294 .is_ivybridge = 1,
295 .is_mobile = 1,
296 };
297
298 static const struct intel_device_info intel_ivybridge_q_info = {
299 GEN7_FEATURES,
300 .is_ivybridge = 1,
301 .num_pipes = 0, /* legal, last one wins */
302 };
303
304 static const struct intel_device_info intel_valleyview_m_info = {
305 GEN7_FEATURES,
306 .is_mobile = 1,
307 .num_pipes = 2,
308 .is_valleyview = 1,
309 .display_mmio_offset = VLV_DISPLAY_BASE,
310 .has_fbc = 0, /* legal, last one wins */
311 .has_llc = 0, /* legal, last one wins */
312 };
313
314 static const struct intel_device_info intel_valleyview_d_info = {
315 GEN7_FEATURES,
316 .num_pipes = 2,
317 .is_valleyview = 1,
318 .display_mmio_offset = VLV_DISPLAY_BASE,
319 .has_fbc = 0, /* legal, last one wins */
320 .has_llc = 0, /* legal, last one wins */
321 };
322
323 static const struct intel_device_info intel_haswell_d_info = {
324 GEN7_FEATURES,
325 .is_haswell = 1,
326 .has_ddi = 1,
327 .has_fpga_dbg = 1,
328 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
329 };
330
331 static const struct intel_device_info intel_haswell_m_info = {
332 GEN7_FEATURES,
333 .is_haswell = 1,
334 .is_mobile = 1,
335 .has_ddi = 1,
336 .has_fpga_dbg = 1,
337 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
338 };
339
340 static const struct intel_device_info intel_broadwell_d_info = {
341 .is_preliminary = 1,
342 .gen = 8, .num_pipes = 3,
343 .need_gfx_hws = 1, .has_hotplug = 1,
344 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
345 .has_llc = 1,
346 .has_ddi = 1,
347 };
348
349 static const struct intel_device_info intel_broadwell_m_info = {
350 .is_preliminary = 1,
351 .gen = 8, .is_mobile = 1, .num_pipes = 3,
352 .need_gfx_hws = 1, .has_hotplug = 1,
353 .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
354 .has_llc = 1,
355 .has_ddi = 1,
356 };
357
358 /*
359 * Make sure any device matches here are from most specific to most
360 * general. For example, since the Quanta match is based on the subsystem
361 * and subvendor IDs, we need it to come before the more general IVB
362 * PCI ID matches, otherwise we'll use the wrong info struct above.
363 */
364 #define INTEL_PCI_IDS \
365 INTEL_I830_IDS(&intel_i830_info), \
366 INTEL_I845G_IDS(&intel_845g_info), \
367 INTEL_I85X_IDS(&intel_i85x_info), \
368 INTEL_I865G_IDS(&intel_i865g_info), \
369 INTEL_I915G_IDS(&intel_i915g_info), \
370 INTEL_I915GM_IDS(&intel_i915gm_info), \
371 INTEL_I945G_IDS(&intel_i945g_info), \
372 INTEL_I945GM_IDS(&intel_i945gm_info), \
373 INTEL_I965G_IDS(&intel_i965g_info), \
374 INTEL_G33_IDS(&intel_g33_info), \
375 INTEL_I965GM_IDS(&intel_i965gm_info), \
376 INTEL_GM45_IDS(&intel_gm45_info), \
377 INTEL_G45_IDS(&intel_g45_info), \
378 INTEL_PINEVIEW_IDS(&intel_pineview_info), \
379 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
380 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
381 INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
382 INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
383 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
384 INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
385 INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
386 INTEL_HSW_D_IDS(&intel_haswell_d_info), \
387 INTEL_HSW_M_IDS(&intel_haswell_m_info), \
388 INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
389 INTEL_VLV_D_IDS(&intel_valleyview_d_info), \
390 INTEL_BDW_M_IDS(&intel_broadwell_m_info), \
391 INTEL_BDW_D_IDS(&intel_broadwell_d_info)
392
393 static const struct pci_device_id pciidlist[] = { /* aka */
394 INTEL_PCI_IDS,
395 {0, 0, 0}
396 };
397
398 #if defined(CONFIG_DRM_I915_KMS)
399 MODULE_DEVICE_TABLE(pci, pciidlist);
400 #endif
401
402 void intel_detect_pch(struct drm_device *dev)
403 {
404 struct drm_i915_private *dev_priv = dev->dev_private;
405 struct pci_dev *pch;
406
407 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
408 * (which really amounts to a PCH but no South Display).
409 */
410 if (INTEL_INFO(dev)->num_pipes == 0) {
411 dev_priv->pch_type = PCH_NOP;
412 return;
413 }
414
415 /*
416 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
417 * make graphics device passthrough work easy for VMM, that only
418 * need to expose ISA bridge to let driver know the real hardware
419 * underneath. This is a requirement from virtualization team.
420 *
421 * In some virtualized environments (e.g. XEN), there is irrelevant
422 * ISA bridge in the system. To work reliably, we should scan trhough
423 * all the ISA bridge devices and check for the first match, instead
424 * of only checking the first one.
425 */
426 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
427 while (pch) {
428 struct pci_dev *curr = pch;
429 if (pch->vendor == PCI_VENDOR_ID_INTEL) {
430 unsigned short id;
431 id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
432 dev_priv->pch_id = id;
433
434 if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
435 dev_priv->pch_type = PCH_IBX;
436 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
437 WARN_ON(!IS_GEN5(dev));
438 } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
439 dev_priv->pch_type = PCH_CPT;
440 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
441 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
442 } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
443 /* PantherPoint is CPT compatible */
444 dev_priv->pch_type = PCH_CPT;
445 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
446 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
447 } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
448 dev_priv->pch_type = PCH_LPT;
449 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
450 WARN_ON(!IS_HASWELL(dev));
451 WARN_ON(IS_ULT(dev));
452 } else if (IS_BROADWELL(dev)) {
453 dev_priv->pch_type = PCH_LPT;
454 dev_priv->pch_id =
455 INTEL_PCH_LPT_LP_DEVICE_ID_TYPE;
456 DRM_DEBUG_KMS("This is Broadwell, assuming "
457 "LynxPoint LP PCH\n");
458 } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
459 dev_priv->pch_type = PCH_LPT;
460 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
461 WARN_ON(!IS_HASWELL(dev));
462 WARN_ON(!IS_ULT(dev));
463 } else {
464 goto check_next;
465 }
466 pci_dev_put(pch);
467 break;
468 }
469 check_next:
470 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
471 pci_dev_put(curr);
472 }
473 if (!pch)
474 DRM_DEBUG_KMS("No PCH found?\n");
475 }
476
477 bool i915_semaphore_is_enabled(struct drm_device *dev)
478 {
479 if (INTEL_INFO(dev)->gen < 6)
480 return 0;
481
482 /* Until we get further testing... */
483 if (IS_GEN8(dev)) {
484 WARN_ON(!i915_preliminary_hw_support);
485 return 0;
486 }
487
488 if (i915_semaphores >= 0)
489 return i915_semaphores;
490
491 #ifdef CONFIG_INTEL_IOMMU
492 /* Enable semaphores on SNB when IO remapping is off */
493 if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
494 return false;
495 #endif
496
497 return 1;
498 }
499
500 static int i915_drm_freeze(struct drm_device *dev)
501 {
502 struct drm_i915_private *dev_priv = dev->dev_private;
503 struct drm_crtc *crtc;
504
505 intel_runtime_pm_get(dev_priv);
506
507 /* ignore lid events during suspend */
508 mutex_lock(&dev_priv->modeset_restore_lock);
509 dev_priv->modeset_restore = MODESET_SUSPENDED;
510 mutex_unlock(&dev_priv->modeset_restore_lock);
511
512 /* We do a lot of poking in a lot of registers, make sure they work
513 * properly. */
514 hsw_disable_package_c8(dev_priv);
515 intel_display_set_init_power(dev, true);
516
517 drm_kms_helper_poll_disable(dev);
518
519 pci_save_state(dev->pdev);
520
521 /* If KMS is active, we do the leavevt stuff here */
522 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
523 int error;
524
525 error = i915_gem_suspend(dev);
526 if (error) {
527 dev_err(&dev->pdev->dev,
528 "GEM idle failed, resume might fail\n");
529 return error;
530 }
531
532 cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
533
534 drm_irq_uninstall(dev);
535 dev_priv->enable_hotplug_processing = false;
536 /*
537 * Disable CRTCs directly since we want to preserve sw state
538 * for _thaw.
539 */
540 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
541 dev_priv->display.crtc_disable(crtc);
542
543 intel_modeset_suspend_hw(dev);
544 }
545
546 i915_gem_suspend_gtt_mappings(dev);
547
548 i915_save_state(dev);
549
550 intel_opregion_fini(dev);
551
552 console_lock();
553 intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
554 console_unlock();
555
556 return 0;
557 }
558
559 int i915_suspend(struct drm_device *dev, pm_message_t state)
560 {
561 int error;
562
563 if (!dev || !dev->dev_private) {
564 DRM_ERROR("dev: %p\n", dev);
565 DRM_ERROR("DRM not initialized, aborting suspend.\n");
566 return -ENODEV;
567 }
568
569 if (state.event == PM_EVENT_PRETHAW)
570 return 0;
571
572
573 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
574 return 0;
575
576 error = i915_drm_freeze(dev);
577 if (error)
578 return error;
579
580 if (state.event == PM_EVENT_SUSPEND) {
581 /* Shut down the device */
582 pci_disable_device(dev->pdev);
583 pci_set_power_state(dev->pdev, PCI_D3hot);
584 }
585
586 return 0;
587 }
588
589 void intel_console_resume(struct work_struct *work)
590 {
591 struct drm_i915_private *dev_priv =
592 container_of(work, struct drm_i915_private,
593 console_resume_work);
594 struct drm_device *dev = dev_priv->dev;
595
596 console_lock();
597 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
598 console_unlock();
599 }
600
601 static void intel_resume_hotplug(struct drm_device *dev)
602 {
603 struct drm_mode_config *mode_config = &dev->mode_config;
604 struct intel_encoder *encoder;
605
606 mutex_lock(&mode_config->mutex);
607 DRM_DEBUG_KMS("running encoder hotplug functions\n");
608
609 list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
610 if (encoder->hot_plug)
611 encoder->hot_plug(encoder);
612
613 mutex_unlock(&mode_config->mutex);
614
615 /* Just fire off a uevent and let userspace tell us what to do */
616 drm_helper_hpd_irq_event(dev);
617 }
618
619 static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
620 {
621 struct drm_i915_private *dev_priv = dev->dev_private;
622 int error = 0;
623
624 intel_uncore_early_sanitize(dev);
625
626 intel_uncore_sanitize(dev);
627
628 if (drm_core_check_feature(dev, DRIVER_MODESET) &&
629 restore_gtt_mappings) {
630 mutex_lock(&dev->struct_mutex);
631 i915_gem_restore_gtt_mappings(dev);
632 mutex_unlock(&dev->struct_mutex);
633 }
634
635 intel_power_domains_init_hw(dev);
636
637 i915_restore_state(dev);
638 intel_opregion_setup(dev);
639
640 /* KMS EnterVT equivalent */
641 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
642 intel_init_pch_refclk(dev);
643
644 mutex_lock(&dev->struct_mutex);
645
646 error = i915_gem_init_hw(dev);
647 mutex_unlock(&dev->struct_mutex);
648
649 /* We need working interrupts for modeset enabling ... */
650 drm_irq_install(dev);
651
652 intel_modeset_init_hw(dev);
653
654 drm_modeset_lock_all(dev);
655 intel_modeset_setup_hw_state(dev, true);
656 drm_modeset_unlock_all(dev);
657
658 /*
659 * ... but also need to make sure that hotplug processing
660 * doesn't cause havoc. Like in the driver load code we don't
661 * bother with the tiny race here where we might loose hotplug
662 * notifications.
663 * */
664 intel_hpd_init(dev);
665 dev_priv->enable_hotplug_processing = true;
666 /* Config may have changed between suspend and resume */
667 intel_resume_hotplug(dev);
668 }
669
670 intel_opregion_init(dev);
671
672 /*
673 * The console lock can be pretty contented on resume due
674 * to all the printk activity. Try to keep it out of the hot
675 * path of resume if possible.
676 */
677 if (console_trylock()) {
678 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
679 console_unlock();
680 } else {
681 schedule_work(&dev_priv->console_resume_work);
682 }
683
684 /* Undo what we did at i915_drm_freeze so the refcount goes back to the
685 * expected level. */
686 hsw_enable_package_c8(dev_priv);
687
688 mutex_lock(&dev_priv->modeset_restore_lock);
689 dev_priv->modeset_restore = MODESET_DONE;
690 mutex_unlock(&dev_priv->modeset_restore_lock);
691
692 intel_runtime_pm_put(dev_priv);
693 return error;
694 }
695
696 static int i915_drm_thaw(struct drm_device *dev)
697 {
698 if (drm_core_check_feature(dev, DRIVER_MODESET))
699 i915_check_and_clear_faults(dev);
700
701 return __i915_drm_thaw(dev, true);
702 }
703
704 int i915_resume(struct drm_device *dev)
705 {
706 struct drm_i915_private *dev_priv = dev->dev_private;
707 int ret;
708
709 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
710 return 0;
711
712 if (pci_enable_device(dev->pdev))
713 return -EIO;
714
715 pci_set_master(dev->pdev);
716
717 /*
718 * Platforms with opregion should have sane BIOS, older ones (gen3 and
719 * earlier) need to restore the GTT mappings since the BIOS might clear
720 * all our scratch PTEs.
721 */
722 ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
723 if (ret)
724 return ret;
725
726 drm_kms_helper_poll_enable(dev);
727 return 0;
728 }
729
730 /**
731 * i915_reset - reset chip after a hang
732 * @dev: drm device to reset
733 *
734 * Reset the chip. Useful if a hang is detected. Returns zero on successful
735 * reset or otherwise an error code.
736 *
737 * Procedure is fairly simple:
738 * - reset the chip using the reset reg
739 * - re-init context state
740 * - re-init hardware status page
741 * - re-init ring buffer
742 * - re-init interrupt state
743 * - re-init display
744 */
745 int i915_reset(struct drm_device *dev)
746 {
747 drm_i915_private_t *dev_priv = dev->dev_private;
748 bool simulated;
749 int ret;
750
751 if (!i915_try_reset)
752 return 0;
753
754 mutex_lock(&dev->struct_mutex);
755
756 i915_gem_reset(dev);
757
758 simulated = dev_priv->gpu_error.stop_rings != 0;
759
760 ret = intel_gpu_reset(dev);
761
762 /* Also reset the gpu hangman. */
763 if (simulated) {
764 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
765 dev_priv->gpu_error.stop_rings = 0;
766 if (ret == -ENODEV) {
767 DRM_INFO("Reset not implemented, but ignoring "
768 "error for simulated gpu hangs\n");
769 ret = 0;
770 }
771 }
772
773 if (ret) {
774 DRM_ERROR("Failed to reset chip: %i\n", ret);
775 mutex_unlock(&dev->struct_mutex);
776 return ret;
777 }
778
779 /* Ok, now get things going again... */
780
781 /*
782 * Everything depends on having the GTT running, so we need to start
783 * there. Fortunately we don't need to do this unless we reset the
784 * chip at a PCI level.
785 *
786 * Next we need to restore the context, but we don't use those
787 * yet either...
788 *
789 * Ring buffer needs to be re-initialized in the KMS case, or if X
790 * was running at the time of the reset (i.e. we weren't VT
791 * switched away).
792 */
793 if (drm_core_check_feature(dev, DRIVER_MODESET) ||
794 !dev_priv->ums.mm_suspended) {
795 dev_priv->ums.mm_suspended = 0;
796
797 ret = i915_gem_init_hw(dev);
798 mutex_unlock(&dev->struct_mutex);
799 if (ret) {
800 DRM_ERROR("Failed hw init on reset %d\n", ret);
801 return ret;
802 }
803
804 drm_irq_uninstall(dev);
805 drm_irq_install(dev);
806 intel_hpd_init(dev);
807 } else {
808 mutex_unlock(&dev->struct_mutex);
809 }
810
811 return 0;
812 }
813
814 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
815 {
816 struct intel_device_info *intel_info =
817 (struct intel_device_info *) ent->driver_data;
818
819 if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
820 DRM_INFO("This hardware requires preliminary hardware support.\n"
821 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
822 return -ENODEV;
823 }
824
825 /* Only bind to function 0 of the device. Early generations
826 * used function 1 as a placeholder for multi-head. This causes
827 * us confusion instead, especially on the systems where both
828 * functions have the same PCI-ID!
829 */
830 if (PCI_FUNC(pdev->devfn))
831 return -ENODEV;
832
833 driver.driver_features &= ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
834
835 return drm_get_pci_dev(pdev, ent, &driver);
836 }
837
838 static void
839 i915_pci_remove(struct pci_dev *pdev)
840 {
841 struct drm_device *dev = pci_get_drvdata(pdev);
842
843 drm_put_dev(dev);
844 }
845
846 static int i915_pm_suspend(struct device *dev)
847 {
848 struct pci_dev *pdev = to_pci_dev(dev);
849 struct drm_device *drm_dev = pci_get_drvdata(pdev);
850 int error;
851
852 if (!drm_dev || !drm_dev->dev_private) {
853 dev_err(dev, "DRM not initialized, aborting suspend.\n");
854 return -ENODEV;
855 }
856
857 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
858 return 0;
859
860 error = i915_drm_freeze(drm_dev);
861 if (error)
862 return error;
863
864 pci_disable_device(pdev);
865 pci_set_power_state(pdev, PCI_D3hot);
866
867 return 0;
868 }
869
870 static int i915_pm_resume(struct device *dev)
871 {
872 struct pci_dev *pdev = to_pci_dev(dev);
873 struct drm_device *drm_dev = pci_get_drvdata(pdev);
874
875 return i915_resume(drm_dev);
876 }
877
878 static int i915_pm_freeze(struct device *dev)
879 {
880 struct pci_dev *pdev = to_pci_dev(dev);
881 struct drm_device *drm_dev = pci_get_drvdata(pdev);
882
883 if (!drm_dev || !drm_dev->dev_private) {
884 dev_err(dev, "DRM not initialized, aborting suspend.\n");
885 return -ENODEV;
886 }
887
888 return i915_drm_freeze(drm_dev);
889 }
890
891 static int i915_pm_thaw(struct device *dev)
892 {
893 struct pci_dev *pdev = to_pci_dev(dev);
894 struct drm_device *drm_dev = pci_get_drvdata(pdev);
895
896 return i915_drm_thaw(drm_dev);
897 }
898
899 static int i915_pm_poweroff(struct device *dev)
900 {
901 struct pci_dev *pdev = to_pci_dev(dev);
902 struct drm_device *drm_dev = pci_get_drvdata(pdev);
903
904 return i915_drm_freeze(drm_dev);
905 }
906
907 static int i915_runtime_suspend(struct device *device)
908 {
909 struct pci_dev *pdev = to_pci_dev(device);
910 struct drm_device *dev = pci_get_drvdata(pdev);
911 struct drm_i915_private *dev_priv = dev->dev_private;
912
913 WARN_ON(!HAS_RUNTIME_PM(dev));
914
915 DRM_DEBUG_KMS("Suspending device\n");
916
917 dev_priv->pm.suspended = true;
918
919 return 0;
920 }
921
922 static int i915_runtime_resume(struct device *device)
923 {
924 struct pci_dev *pdev = to_pci_dev(device);
925 struct drm_device *dev = pci_get_drvdata(pdev);
926 struct drm_i915_private *dev_priv = dev->dev_private;
927
928 WARN_ON(!HAS_RUNTIME_PM(dev));
929
930 DRM_DEBUG_KMS("Resuming device\n");
931
932 dev_priv->pm.suspended = false;
933
934 return 0;
935 }
936
937 static const struct dev_pm_ops i915_pm_ops = {
938 .suspend = i915_pm_suspend,
939 .resume = i915_pm_resume,
940 .freeze = i915_pm_freeze,
941 .thaw = i915_pm_thaw,
942 .poweroff = i915_pm_poweroff,
943 .restore = i915_pm_resume,
944 .runtime_suspend = i915_runtime_suspend,
945 .runtime_resume = i915_runtime_resume,
946 };
947
948 static const struct vm_operations_struct i915_gem_vm_ops = {
949 .fault = i915_gem_fault,
950 .open = drm_gem_vm_open,
951 .close = drm_gem_vm_close,
952 };
953
954 static const struct file_operations i915_driver_fops = {
955 .owner = THIS_MODULE,
956 .open = drm_open,
957 .release = drm_release,
958 .unlocked_ioctl = drm_ioctl,
959 .mmap = drm_gem_mmap,
960 .poll = drm_poll,
961 .read = drm_read,
962 #ifdef CONFIG_COMPAT
963 .compat_ioctl = i915_compat_ioctl,
964 #endif
965 .llseek = noop_llseek,
966 };
967
968 static struct drm_driver driver = {
969 /* Don't use MTRRs here; the Xserver or userspace app should
970 * deal with them for Intel hardware.
971 */
972 .driver_features =
973 DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
974 DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
975 DRIVER_RENDER,
976 .load = i915_driver_load,
977 .unload = i915_driver_unload,
978 .open = i915_driver_open,
979 .lastclose = i915_driver_lastclose,
980 .preclose = i915_driver_preclose,
981 .postclose = i915_driver_postclose,
982
983 /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
984 .suspend = i915_suspend,
985 .resume = i915_resume,
986
987 .device_is_agp = i915_driver_device_is_agp,
988 .master_create = i915_master_create,
989 .master_destroy = i915_master_destroy,
990 #if defined(CONFIG_DEBUG_FS)
991 .debugfs_init = i915_debugfs_init,
992 .debugfs_cleanup = i915_debugfs_cleanup,
993 #endif
994 .gem_free_object = i915_gem_free_object,
995 .gem_vm_ops = &i915_gem_vm_ops,
996
997 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
998 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
999 .gem_prime_export = i915_gem_prime_export,
1000 .gem_prime_import = i915_gem_prime_import,
1001
1002 .dumb_create = i915_gem_dumb_create,
1003 .dumb_map_offset = i915_gem_mmap_gtt,
1004 .dumb_destroy = drm_gem_dumb_destroy,
1005 .ioctls = i915_ioctls,
1006 .fops = &i915_driver_fops,
1007 .name = DRIVER_NAME,
1008 .desc = DRIVER_DESC,
1009 .date = DRIVER_DATE,
1010 .major = DRIVER_MAJOR,
1011 .minor = DRIVER_MINOR,
1012 .patchlevel = DRIVER_PATCHLEVEL,
1013 };
1014
1015 static struct pci_driver i915_pci_driver = {
1016 .name = DRIVER_NAME,
1017 .id_table = pciidlist,
1018 .probe = i915_pci_probe,
1019 .remove = i915_pci_remove,
1020 .driver.pm = &i915_pm_ops,
1021 };
1022
1023 static int __init i915_init(void)
1024 {
1025 driver.num_ioctls = i915_max_ioctl;
1026
1027 /*
1028 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
1029 * explicitly disabled with the module pararmeter.
1030 *
1031 * Otherwise, just follow the parameter (defaulting to off).
1032 *
1033 * Allow optional vga_text_mode_force boot option to override
1034 * the default behavior.
1035 */
1036 #if defined(CONFIG_DRM_I915_KMS)
1037 if (i915_modeset != 0)
1038 driver.driver_features |= DRIVER_MODESET;
1039 #endif
1040 if (i915_modeset == 1)
1041 driver.driver_features |= DRIVER_MODESET;
1042
1043 #ifdef CONFIG_VGA_CONSOLE
1044 if (vgacon_text_force() && i915_modeset == -1)
1045 driver.driver_features &= ~DRIVER_MODESET;
1046 #endif
1047
1048 if (!(driver.driver_features & DRIVER_MODESET)) {
1049 driver.get_vblank_timestamp = NULL;
1050 #ifndef CONFIG_DRM_I915_UMS
1051 /* Silently fail loading to not upset userspace. */
1052 return 0;
1053 #endif
1054 }
1055
1056 return drm_pci_init(&driver, &i915_pci_driver);
1057 }
1058
1059 static void __exit i915_exit(void)
1060 {
1061 #ifndef CONFIG_DRM_I915_UMS
1062 if (!(driver.driver_features & DRIVER_MODESET))
1063 return; /* Never loaded a driver. */
1064 #endif
1065
1066 drm_pci_exit(&driver, &i915_pci_driver);
1067 }
1068
1069 module_init(i915_init);
1070 module_exit(i915_exit);
1071
1072 MODULE_AUTHOR(DRIVER_AUTHOR);
1073 MODULE_DESCRIPTION(DRIVER_DESC);
1074 MODULE_LICENSE("GPL and additional rights");
This page took 0.113939 seconds and 5 git commands to generate.