1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
32 #include <drm/i915_drm.h>
34 #include "i915_trace.h"
35 #include "intel_drv.h"
37 #include <linux/console.h>
38 #include <linux/module.h>
39 #include <drm/drm_crtc_helper.h>
41 static int i915_modeset __read_mostly
= -1;
42 module_param_named(modeset
, i915_modeset
, int, 0400);
43 MODULE_PARM_DESC(modeset
,
44 "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
45 "1=on, -1=force vga console preference [default])");
47 unsigned int i915_fbpercrtc __always_unused
= 0;
48 module_param_named(fbpercrtc
, i915_fbpercrtc
, int, 0400);
50 int i915_panel_ignore_lid __read_mostly
= 1;
51 module_param_named(panel_ignore_lid
, i915_panel_ignore_lid
, int, 0600);
52 MODULE_PARM_DESC(panel_ignore_lid
,
53 "Override lid status (0=autodetect, 1=autodetect disabled [default], "
54 "-1=force lid closed, -2=force lid open)");
56 unsigned int i915_powersave __read_mostly
= 1;
57 module_param_named(powersave
, i915_powersave
, int, 0600);
58 MODULE_PARM_DESC(powersave
,
59 "Enable powersavings, fbc, downclocking, etc. (default: true)");
61 int i915_semaphores __read_mostly
= -1;
62 module_param_named(semaphores
, i915_semaphores
, int, 0600);
63 MODULE_PARM_DESC(semaphores
,
64 "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
66 int i915_enable_rc6 __read_mostly
= -1;
67 module_param_named(i915_enable_rc6
, i915_enable_rc6
, int, 0400);
68 MODULE_PARM_DESC(i915_enable_rc6
,
69 "Enable power-saving render C-state 6. "
70 "Different stages can be selected via bitmask values "
71 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
72 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
73 "default: -1 (use per-chip default)");
75 int i915_enable_fbc __read_mostly
= -1;
76 module_param_named(i915_enable_fbc
, i915_enable_fbc
, int, 0600);
77 MODULE_PARM_DESC(i915_enable_fbc
,
78 "Enable frame buffer compression for power savings "
79 "(default: -1 (use per-chip default))");
81 unsigned int i915_lvds_downclock __read_mostly
= 0;
82 module_param_named(lvds_downclock
, i915_lvds_downclock
, int, 0400);
83 MODULE_PARM_DESC(lvds_downclock
,
84 "Use panel (LVDS/eDP) downclocking for power savings "
87 int i915_lvds_channel_mode __read_mostly
;
88 module_param_named(lvds_channel_mode
, i915_lvds_channel_mode
, int, 0600);
89 MODULE_PARM_DESC(lvds_channel_mode
,
90 "Specify LVDS channel mode "
91 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
93 int i915_panel_use_ssc __read_mostly
= -1;
94 module_param_named(lvds_use_ssc
, i915_panel_use_ssc
, int, 0600);
95 MODULE_PARM_DESC(lvds_use_ssc
,
96 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
97 "(default: auto from VBT)");
99 int i915_vbt_sdvo_panel_type __read_mostly
= -1;
100 module_param_named(vbt_sdvo_panel_type
, i915_vbt_sdvo_panel_type
, int, 0600);
101 MODULE_PARM_DESC(vbt_sdvo_panel_type
,
102 "Override/Ignore selection of SDVO panel mode in the VBT "
103 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
105 static bool i915_try_reset __read_mostly
= true;
106 module_param_named(reset
, i915_try_reset
, bool, 0600);
107 MODULE_PARM_DESC(reset
, "Attempt GPU resets (default: true)");
109 bool i915_enable_hangcheck __read_mostly
= true;
110 module_param_named(enable_hangcheck
, i915_enable_hangcheck
, bool, 0644);
111 MODULE_PARM_DESC(enable_hangcheck
,
112 "Periodically check GPU activity for detecting hangs. "
113 "WARNING: Disabling this can cause system wide hangs. "
116 int i915_enable_ppgtt __read_mostly
= -1;
117 module_param_named(i915_enable_ppgtt
, i915_enable_ppgtt
, int, 0400);
118 MODULE_PARM_DESC(i915_enable_ppgtt
,
119 "Enable PPGTT (default: true)");
121 int i915_enable_psr __read_mostly
= 0;
122 module_param_named(enable_psr
, i915_enable_psr
, int, 0600);
123 MODULE_PARM_DESC(enable_psr
, "Enable PSR (default: false)");
125 unsigned int i915_preliminary_hw_support __read_mostly
= IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT
);
126 module_param_named(preliminary_hw_support
, i915_preliminary_hw_support
, int, 0600);
127 MODULE_PARM_DESC(preliminary_hw_support
,
128 "Enable preliminary hardware support.");
130 int i915_disable_power_well __read_mostly
= 1;
131 module_param_named(disable_power_well
, i915_disable_power_well
, int, 0600);
132 MODULE_PARM_DESC(disable_power_well
,
133 "Disable the power well when possible (default: true)");
135 int i915_enable_ips __read_mostly
= 1;
136 module_param_named(enable_ips
, i915_enable_ips
, int, 0600);
137 MODULE_PARM_DESC(enable_ips
, "Enable IPS (default: true)");
139 bool i915_fastboot __read_mostly
= 0;
140 module_param_named(fastboot
, i915_fastboot
, bool, 0600);
141 MODULE_PARM_DESC(fastboot
, "Try to skip unnecessary mode sets at boot time "
144 int i915_enable_pc8 __read_mostly
= 1;
145 module_param_named(enable_pc8
, i915_enable_pc8
, int, 0600);
146 MODULE_PARM_DESC(enable_pc8
, "Enable support for low power package C states (PC8+) (default: true)");
148 int i915_pc8_timeout __read_mostly
= 5000;
149 module_param_named(pc8_timeout
, i915_pc8_timeout
, int, 0600);
150 MODULE_PARM_DESC(pc8_timeout
, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
152 bool i915_prefault_disable __read_mostly
;
153 module_param_named(prefault_disable
, i915_prefault_disable
, bool, 0600);
154 MODULE_PARM_DESC(prefault_disable
,
155 "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
157 static struct drm_driver driver
;
159 static const struct intel_device_info intel_i830_info
= {
160 .gen
= 2, .is_mobile
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
161 .has_overlay
= 1, .overlay_needs_physical
= 1,
162 .ring_mask
= RENDER_RING
,
165 static const struct intel_device_info intel_845g_info
= {
166 .gen
= 2, .num_pipes
= 1,
167 .has_overlay
= 1, .overlay_needs_physical
= 1,
168 .ring_mask
= RENDER_RING
,
171 static const struct intel_device_info intel_i85x_info
= {
172 .gen
= 2, .is_i85x
= 1, .is_mobile
= 1, .num_pipes
= 2,
173 .cursor_needs_physical
= 1,
174 .has_overlay
= 1, .overlay_needs_physical
= 1,
176 .ring_mask
= RENDER_RING
,
179 static const struct intel_device_info intel_i865g_info
= {
180 .gen
= 2, .num_pipes
= 1,
181 .has_overlay
= 1, .overlay_needs_physical
= 1,
182 .ring_mask
= RENDER_RING
,
185 static const struct intel_device_info intel_i915g_info
= {
186 .gen
= 3, .is_i915g
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
187 .has_overlay
= 1, .overlay_needs_physical
= 1,
188 .ring_mask
= RENDER_RING
,
190 static const struct intel_device_info intel_i915gm_info
= {
191 .gen
= 3, .is_mobile
= 1, .num_pipes
= 2,
192 .cursor_needs_physical
= 1,
193 .has_overlay
= 1, .overlay_needs_physical
= 1,
196 .ring_mask
= RENDER_RING
,
198 static const struct intel_device_info intel_i945g_info
= {
199 .gen
= 3, .has_hotplug
= 1, .cursor_needs_physical
= 1, .num_pipes
= 2,
200 .has_overlay
= 1, .overlay_needs_physical
= 1,
201 .ring_mask
= RENDER_RING
,
203 static const struct intel_device_info intel_i945gm_info
= {
204 .gen
= 3, .is_i945gm
= 1, .is_mobile
= 1, .num_pipes
= 2,
205 .has_hotplug
= 1, .cursor_needs_physical
= 1,
206 .has_overlay
= 1, .overlay_needs_physical
= 1,
209 .ring_mask
= RENDER_RING
,
212 static const struct intel_device_info intel_i965g_info
= {
213 .gen
= 4, .is_broadwater
= 1, .num_pipes
= 2,
216 .ring_mask
= RENDER_RING
,
219 static const struct intel_device_info intel_i965gm_info
= {
220 .gen
= 4, .is_crestline
= 1, .num_pipes
= 2,
221 .is_mobile
= 1, .has_fbc
= 1, .has_hotplug
= 1,
224 .ring_mask
= RENDER_RING
,
227 static const struct intel_device_info intel_g33_info
= {
228 .gen
= 3, .is_g33
= 1, .num_pipes
= 2,
229 .need_gfx_hws
= 1, .has_hotplug
= 1,
231 .ring_mask
= RENDER_RING
,
234 static const struct intel_device_info intel_g45_info
= {
235 .gen
= 4, .is_g4x
= 1, .need_gfx_hws
= 1, .num_pipes
= 2,
236 .has_pipe_cxsr
= 1, .has_hotplug
= 1,
237 .ring_mask
= RENDER_RING
| BSD_RING
,
240 static const struct intel_device_info intel_gm45_info
= {
241 .gen
= 4, .is_g4x
= 1, .num_pipes
= 2,
242 .is_mobile
= 1, .need_gfx_hws
= 1, .has_fbc
= 1,
243 .has_pipe_cxsr
= 1, .has_hotplug
= 1,
245 .ring_mask
= RENDER_RING
| BSD_RING
,
248 static const struct intel_device_info intel_pineview_info
= {
249 .gen
= 3, .is_g33
= 1, .is_pineview
= 1, .is_mobile
= 1, .num_pipes
= 2,
250 .need_gfx_hws
= 1, .has_hotplug
= 1,
254 static const struct intel_device_info intel_ironlake_d_info
= {
255 .gen
= 5, .num_pipes
= 2,
256 .need_gfx_hws
= 1, .has_hotplug
= 1,
257 .ring_mask
= RENDER_RING
| BSD_RING
,
260 static const struct intel_device_info intel_ironlake_m_info
= {
261 .gen
= 5, .is_mobile
= 1, .num_pipes
= 2,
262 .need_gfx_hws
= 1, .has_hotplug
= 1,
264 .ring_mask
= RENDER_RING
| BSD_RING
,
267 static const struct intel_device_info intel_sandybridge_d_info
= {
268 .gen
= 6, .num_pipes
= 2,
269 .need_gfx_hws
= 1, .has_hotplug
= 1,
271 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
,
275 static const struct intel_device_info intel_sandybridge_m_info
= {
276 .gen
= 6, .is_mobile
= 1, .num_pipes
= 2,
277 .need_gfx_hws
= 1, .has_hotplug
= 1,
279 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
,
283 #define GEN7_FEATURES \
284 .gen = 7, .num_pipes = 3, \
285 .need_gfx_hws = 1, .has_hotplug = 1, \
287 .ring_mask = RENDER_RING | BSD_RING | BLT_RING, \
290 static const struct intel_device_info intel_ivybridge_d_info
= {
295 static const struct intel_device_info intel_ivybridge_m_info
= {
301 static const struct intel_device_info intel_ivybridge_q_info
= {
304 .num_pipes
= 0, /* legal, last one wins */
307 static const struct intel_device_info intel_valleyview_m_info
= {
312 .display_mmio_offset
= VLV_DISPLAY_BASE
,
313 .has_fbc
= 0, /* legal, last one wins */
314 .has_llc
= 0, /* legal, last one wins */
317 static const struct intel_device_info intel_valleyview_d_info
= {
321 .display_mmio_offset
= VLV_DISPLAY_BASE
,
322 .has_fbc
= 0, /* legal, last one wins */
323 .has_llc
= 0, /* legal, last one wins */
326 static const struct intel_device_info intel_haswell_d_info
= {
331 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
334 static const struct intel_device_info intel_haswell_m_info
= {
340 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
343 static const struct intel_device_info intel_broadwell_d_info
= {
345 .gen
= 8, .num_pipes
= 3,
346 .need_gfx_hws
= 1, .has_hotplug
= 1,
347 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
352 static const struct intel_device_info intel_broadwell_m_info
= {
354 .gen
= 8, .is_mobile
= 1, .num_pipes
= 3,
355 .need_gfx_hws
= 1, .has_hotplug
= 1,
356 .ring_mask
= RENDER_RING
| BSD_RING
| BLT_RING
| VEBOX_RING
,
362 * Make sure any device matches here are from most specific to most
363 * general. For example, since the Quanta match is based on the subsystem
364 * and subvendor IDs, we need it to come before the more general IVB
365 * PCI ID matches, otherwise we'll use the wrong info struct above.
367 #define INTEL_PCI_IDS \
368 INTEL_I830_IDS(&intel_i830_info), \
369 INTEL_I845G_IDS(&intel_845g_info), \
370 INTEL_I85X_IDS(&intel_i85x_info), \
371 INTEL_I865G_IDS(&intel_i865g_info), \
372 INTEL_I915G_IDS(&intel_i915g_info), \
373 INTEL_I915GM_IDS(&intel_i915gm_info), \
374 INTEL_I945G_IDS(&intel_i945g_info), \
375 INTEL_I945GM_IDS(&intel_i945gm_info), \
376 INTEL_I965G_IDS(&intel_i965g_info), \
377 INTEL_G33_IDS(&intel_g33_info), \
378 INTEL_I965GM_IDS(&intel_i965gm_info), \
379 INTEL_GM45_IDS(&intel_gm45_info), \
380 INTEL_G45_IDS(&intel_g45_info), \
381 INTEL_PINEVIEW_IDS(&intel_pineview_info), \
382 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
383 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
384 INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
385 INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
386 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
387 INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
388 INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
389 INTEL_HSW_D_IDS(&intel_haswell_d_info), \
390 INTEL_HSW_M_IDS(&intel_haswell_m_info), \
391 INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
392 INTEL_VLV_D_IDS(&intel_valleyview_d_info), \
393 INTEL_BDW_M_IDS(&intel_broadwell_m_info), \
394 INTEL_BDW_D_IDS(&intel_broadwell_d_info)
396 static const struct pci_device_id pciidlist
[] = { /* aka */
401 #if defined(CONFIG_DRM_I915_KMS)
402 MODULE_DEVICE_TABLE(pci
, pciidlist
);
405 void intel_detect_pch(struct drm_device
*dev
)
407 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
410 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
411 * (which really amounts to a PCH but no South Display).
413 if (INTEL_INFO(dev
)->num_pipes
== 0) {
414 dev_priv
->pch_type
= PCH_NOP
;
419 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
420 * make graphics device passthrough work easy for VMM, that only
421 * need to expose ISA bridge to let driver know the real hardware
422 * underneath. This is a requirement from virtualization team.
424 * In some virtualized environments (e.g. XEN), there is irrelevant
425 * ISA bridge in the system. To work reliably, we should scan trhough
426 * all the ISA bridge devices and check for the first match, instead
427 * of only checking the first one.
429 pch
= pci_get_class(PCI_CLASS_BRIDGE_ISA
<< 8, NULL
);
431 struct pci_dev
*curr
= pch
;
432 if (pch
->vendor
== PCI_VENDOR_ID_INTEL
) {
434 id
= pch
->device
& INTEL_PCH_DEVICE_ID_MASK
;
435 dev_priv
->pch_id
= id
;
437 if (id
== INTEL_PCH_IBX_DEVICE_ID_TYPE
) {
438 dev_priv
->pch_type
= PCH_IBX
;
439 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
440 WARN_ON(!IS_GEN5(dev
));
441 } else if (id
== INTEL_PCH_CPT_DEVICE_ID_TYPE
) {
442 dev_priv
->pch_type
= PCH_CPT
;
443 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
444 WARN_ON(!(IS_GEN6(dev
) || IS_IVYBRIDGE(dev
)));
445 } else if (id
== INTEL_PCH_PPT_DEVICE_ID_TYPE
) {
446 /* PantherPoint is CPT compatible */
447 dev_priv
->pch_type
= PCH_CPT
;
448 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
449 WARN_ON(!(IS_GEN6(dev
) || IS_IVYBRIDGE(dev
)));
450 } else if (id
== INTEL_PCH_LPT_DEVICE_ID_TYPE
) {
451 dev_priv
->pch_type
= PCH_LPT
;
452 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
453 WARN_ON(!IS_HASWELL(dev
));
454 WARN_ON(IS_ULT(dev
));
455 } else if (IS_BROADWELL(dev
)) {
456 dev_priv
->pch_type
= PCH_LPT
;
458 INTEL_PCH_LPT_LP_DEVICE_ID_TYPE
;
459 DRM_DEBUG_KMS("This is Broadwell, assuming "
460 "LynxPoint LP PCH\n");
461 } else if (id
== INTEL_PCH_LPT_LP_DEVICE_ID_TYPE
) {
462 dev_priv
->pch_type
= PCH_LPT
;
463 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
464 WARN_ON(!IS_HASWELL(dev
));
465 WARN_ON(!IS_ULT(dev
));
473 pch
= pci_get_class(PCI_CLASS_BRIDGE_ISA
<< 8, curr
);
477 DRM_DEBUG_KMS("No PCH found?\n");
480 bool i915_semaphore_is_enabled(struct drm_device
*dev
)
482 if (INTEL_INFO(dev
)->gen
< 6)
485 /* Until we get further testing... */
487 WARN_ON(!i915_preliminary_hw_support
);
491 if (i915_semaphores
>= 0)
492 return i915_semaphores
;
494 #ifdef CONFIG_INTEL_IOMMU
495 /* Enable semaphores on SNB when IO remapping is off */
496 if (INTEL_INFO(dev
)->gen
== 6 && intel_iommu_gfx_mapped
)
503 static int i915_drm_freeze(struct drm_device
*dev
)
505 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
506 struct drm_crtc
*crtc
;
508 intel_runtime_pm_get(dev_priv
);
510 /* ignore lid events during suspend */
511 mutex_lock(&dev_priv
->modeset_restore_lock
);
512 dev_priv
->modeset_restore
= MODESET_SUSPENDED
;
513 mutex_unlock(&dev_priv
->modeset_restore_lock
);
515 /* We do a lot of poking in a lot of registers, make sure they work
517 hsw_disable_package_c8(dev_priv
);
518 intel_display_set_init_power(dev
, true);
520 drm_kms_helper_poll_disable(dev
);
522 pci_save_state(dev
->pdev
);
524 /* If KMS is active, we do the leavevt stuff here */
525 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
528 error
= i915_gem_suspend(dev
);
530 dev_err(&dev
->pdev
->dev
,
531 "GEM idle failed, resume might fail\n");
535 cancel_delayed_work_sync(&dev_priv
->rps
.delayed_resume_work
);
537 drm_irq_uninstall(dev
);
538 dev_priv
->enable_hotplug_processing
= false;
540 * Disable CRTCs directly since we want to preserve sw state
543 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
)
544 dev_priv
->display
.crtc_disable(crtc
);
546 intel_modeset_suspend_hw(dev
);
549 i915_gem_suspend_gtt_mappings(dev
);
551 i915_save_state(dev
);
553 intel_opregion_fini(dev
);
556 intel_fbdev_set_suspend(dev
, FBINFO_STATE_SUSPENDED
);
562 int i915_suspend(struct drm_device
*dev
, pm_message_t state
)
566 if (!dev
|| !dev
->dev_private
) {
567 DRM_ERROR("dev: %p\n", dev
);
568 DRM_ERROR("DRM not initialized, aborting suspend.\n");
572 if (state
.event
== PM_EVENT_PRETHAW
)
576 if (dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
579 error
= i915_drm_freeze(dev
);
583 if (state
.event
== PM_EVENT_SUSPEND
) {
584 /* Shut down the device */
585 pci_disable_device(dev
->pdev
);
586 pci_set_power_state(dev
->pdev
, PCI_D3hot
);
592 void intel_console_resume(struct work_struct
*work
)
594 struct drm_i915_private
*dev_priv
=
595 container_of(work
, struct drm_i915_private
,
596 console_resume_work
);
597 struct drm_device
*dev
= dev_priv
->dev
;
600 intel_fbdev_set_suspend(dev
, FBINFO_STATE_RUNNING
);
604 static void intel_resume_hotplug(struct drm_device
*dev
)
606 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
607 struct intel_encoder
*encoder
;
609 mutex_lock(&mode_config
->mutex
);
610 DRM_DEBUG_KMS("running encoder hotplug functions\n");
612 list_for_each_entry(encoder
, &mode_config
->encoder_list
, base
.head
)
613 if (encoder
->hot_plug
)
614 encoder
->hot_plug(encoder
);
616 mutex_unlock(&mode_config
->mutex
);
618 /* Just fire off a uevent and let userspace tell us what to do */
619 drm_helper_hpd_irq_event(dev
);
622 static int __i915_drm_thaw(struct drm_device
*dev
, bool restore_gtt_mappings
)
624 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
627 intel_uncore_early_sanitize(dev
);
629 intel_uncore_sanitize(dev
);
631 if (drm_core_check_feature(dev
, DRIVER_MODESET
) &&
632 restore_gtt_mappings
) {
633 mutex_lock(&dev
->struct_mutex
);
634 i915_gem_restore_gtt_mappings(dev
);
635 mutex_unlock(&dev
->struct_mutex
);
638 intel_power_domains_init_hw(dev
);
640 i915_restore_state(dev
);
641 intel_opregion_setup(dev
);
643 /* KMS EnterVT equivalent */
644 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
645 intel_init_pch_refclk(dev
);
647 mutex_lock(&dev
->struct_mutex
);
649 error
= i915_gem_init_hw(dev
);
650 mutex_unlock(&dev
->struct_mutex
);
652 /* We need working interrupts for modeset enabling ... */
653 drm_irq_install(dev
);
655 intel_modeset_init_hw(dev
);
657 drm_modeset_lock_all(dev
);
658 intel_modeset_setup_hw_state(dev
, true);
659 drm_modeset_unlock_all(dev
);
662 * ... but also need to make sure that hotplug processing
663 * doesn't cause havoc. Like in the driver load code we don't
664 * bother with the tiny race here where we might loose hotplug
668 dev_priv
->enable_hotplug_processing
= true;
669 /* Config may have changed between suspend and resume */
670 intel_resume_hotplug(dev
);
673 intel_opregion_init(dev
);
676 * The console lock can be pretty contented on resume due
677 * to all the printk activity. Try to keep it out of the hot
678 * path of resume if possible.
680 if (console_trylock()) {
681 intel_fbdev_set_suspend(dev
, FBINFO_STATE_RUNNING
);
684 schedule_work(&dev_priv
->console_resume_work
);
687 /* Undo what we did at i915_drm_freeze so the refcount goes back to the
689 hsw_enable_package_c8(dev_priv
);
691 mutex_lock(&dev_priv
->modeset_restore_lock
);
692 dev_priv
->modeset_restore
= MODESET_DONE
;
693 mutex_unlock(&dev_priv
->modeset_restore_lock
);
695 intel_runtime_pm_put(dev_priv
);
699 static int i915_drm_thaw(struct drm_device
*dev
)
701 if (drm_core_check_feature(dev
, DRIVER_MODESET
))
702 i915_check_and_clear_faults(dev
);
704 return __i915_drm_thaw(dev
, true);
707 int i915_resume(struct drm_device
*dev
)
709 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
712 if (dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
715 if (pci_enable_device(dev
->pdev
))
718 pci_set_master(dev
->pdev
);
721 * Platforms with opregion should have sane BIOS, older ones (gen3 and
722 * earlier) need to restore the GTT mappings since the BIOS might clear
723 * all our scratch PTEs.
725 ret
= __i915_drm_thaw(dev
, !dev_priv
->opregion
.header
);
729 drm_kms_helper_poll_enable(dev
);
734 * i915_reset - reset chip after a hang
735 * @dev: drm device to reset
737 * Reset the chip. Useful if a hang is detected. Returns zero on successful
738 * reset or otherwise an error code.
740 * Procedure is fairly simple:
741 * - reset the chip using the reset reg
742 * - re-init context state
743 * - re-init hardware status page
744 * - re-init ring buffer
745 * - re-init interrupt state
748 int i915_reset(struct drm_device
*dev
)
750 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
757 mutex_lock(&dev
->struct_mutex
);
761 simulated
= dev_priv
->gpu_error
.stop_rings
!= 0;
763 ret
= intel_gpu_reset(dev
);
765 /* Also reset the gpu hangman. */
767 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
768 dev_priv
->gpu_error
.stop_rings
= 0;
769 if (ret
== -ENODEV
) {
770 DRM_INFO("Reset not implemented, but ignoring "
771 "error for simulated gpu hangs\n");
777 DRM_ERROR("Failed to reset chip: %i\n", ret
);
778 mutex_unlock(&dev
->struct_mutex
);
782 /* Ok, now get things going again... */
785 * Everything depends on having the GTT running, so we need to start
786 * there. Fortunately we don't need to do this unless we reset the
787 * chip at a PCI level.
789 * Next we need to restore the context, but we don't use those
792 * Ring buffer needs to be re-initialized in the KMS case, or if X
793 * was running at the time of the reset (i.e. we weren't VT
796 if (drm_core_check_feature(dev
, DRIVER_MODESET
) ||
797 !dev_priv
->ums
.mm_suspended
) {
798 dev_priv
->ums
.mm_suspended
= 0;
800 ret
= i915_gem_init_hw(dev
);
801 mutex_unlock(&dev
->struct_mutex
);
803 DRM_ERROR("Failed hw init on reset %d\n", ret
);
807 drm_irq_uninstall(dev
);
808 drm_irq_install(dev
);
811 mutex_unlock(&dev
->struct_mutex
);
817 static int i915_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
819 struct intel_device_info
*intel_info
=
820 (struct intel_device_info
*) ent
->driver_data
;
822 if (IS_PRELIMINARY_HW(intel_info
) && !i915_preliminary_hw_support
) {
823 DRM_INFO("This hardware requires preliminary hardware support.\n"
824 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
828 /* Only bind to function 0 of the device. Early generations
829 * used function 1 as a placeholder for multi-head. This causes
830 * us confusion instead, especially on the systems where both
831 * functions have the same PCI-ID!
833 if (PCI_FUNC(pdev
->devfn
))
836 driver
.driver_features
&= ~(DRIVER_USE_AGP
| DRIVER_REQUIRE_AGP
);
838 return drm_get_pci_dev(pdev
, ent
, &driver
);
842 i915_pci_remove(struct pci_dev
*pdev
)
844 struct drm_device
*dev
= pci_get_drvdata(pdev
);
849 static int i915_pm_suspend(struct device
*dev
)
851 struct pci_dev
*pdev
= to_pci_dev(dev
);
852 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
855 if (!drm_dev
|| !drm_dev
->dev_private
) {
856 dev_err(dev
, "DRM not initialized, aborting suspend.\n");
860 if (drm_dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
863 error
= i915_drm_freeze(drm_dev
);
867 pci_disable_device(pdev
);
868 pci_set_power_state(pdev
, PCI_D3hot
);
873 static int i915_pm_resume(struct device
*dev
)
875 struct pci_dev
*pdev
= to_pci_dev(dev
);
876 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
878 return i915_resume(drm_dev
);
881 static int i915_pm_freeze(struct device
*dev
)
883 struct pci_dev
*pdev
= to_pci_dev(dev
);
884 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
886 if (!drm_dev
|| !drm_dev
->dev_private
) {
887 dev_err(dev
, "DRM not initialized, aborting suspend.\n");
891 return i915_drm_freeze(drm_dev
);
894 static int i915_pm_thaw(struct device
*dev
)
896 struct pci_dev
*pdev
= to_pci_dev(dev
);
897 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
899 return i915_drm_thaw(drm_dev
);
902 static int i915_pm_poweroff(struct device
*dev
)
904 struct pci_dev
*pdev
= to_pci_dev(dev
);
905 struct drm_device
*drm_dev
= pci_get_drvdata(pdev
);
907 return i915_drm_freeze(drm_dev
);
910 static int i915_runtime_suspend(struct device
*device
)
912 struct pci_dev
*pdev
= to_pci_dev(device
);
913 struct drm_device
*dev
= pci_get_drvdata(pdev
);
914 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
916 WARN_ON(!HAS_RUNTIME_PM(dev
));
918 DRM_DEBUG_KMS("Suspending device\n");
920 dev_priv
->pm
.suspended
= true;
921 intel_opregion_notify_adapter(dev
, PCI_D3cold
);
926 static int i915_runtime_resume(struct device
*device
)
928 struct pci_dev
*pdev
= to_pci_dev(device
);
929 struct drm_device
*dev
= pci_get_drvdata(pdev
);
930 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
932 WARN_ON(!HAS_RUNTIME_PM(dev
));
934 DRM_DEBUG_KMS("Resuming device\n");
936 intel_opregion_notify_adapter(dev
, PCI_D0
);
937 dev_priv
->pm
.suspended
= false;
942 static const struct dev_pm_ops i915_pm_ops
= {
943 .suspend
= i915_pm_suspend
,
944 .resume
= i915_pm_resume
,
945 .freeze
= i915_pm_freeze
,
946 .thaw
= i915_pm_thaw
,
947 .poweroff
= i915_pm_poweroff
,
948 .restore
= i915_pm_resume
,
949 .runtime_suspend
= i915_runtime_suspend
,
950 .runtime_resume
= i915_runtime_resume
,
953 static const struct vm_operations_struct i915_gem_vm_ops
= {
954 .fault
= i915_gem_fault
,
955 .open
= drm_gem_vm_open
,
956 .close
= drm_gem_vm_close
,
959 static const struct file_operations i915_driver_fops
= {
960 .owner
= THIS_MODULE
,
962 .release
= drm_release
,
963 .unlocked_ioctl
= drm_ioctl
,
964 .mmap
= drm_gem_mmap
,
968 .compat_ioctl
= i915_compat_ioctl
,
970 .llseek
= noop_llseek
,
973 static struct drm_driver driver
= {
974 /* Don't use MTRRs here; the Xserver or userspace app should
975 * deal with them for Intel hardware.
978 DRIVER_USE_AGP
| DRIVER_REQUIRE_AGP
|
979 DRIVER_HAVE_IRQ
| DRIVER_IRQ_SHARED
| DRIVER_GEM
| DRIVER_PRIME
|
981 .load
= i915_driver_load
,
982 .unload
= i915_driver_unload
,
983 .open
= i915_driver_open
,
984 .lastclose
= i915_driver_lastclose
,
985 .preclose
= i915_driver_preclose
,
986 .postclose
= i915_driver_postclose
,
988 /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
989 .suspend
= i915_suspend
,
990 .resume
= i915_resume
,
992 .device_is_agp
= i915_driver_device_is_agp
,
993 .master_create
= i915_master_create
,
994 .master_destroy
= i915_master_destroy
,
995 #if defined(CONFIG_DEBUG_FS)
996 .debugfs_init
= i915_debugfs_init
,
997 .debugfs_cleanup
= i915_debugfs_cleanup
,
999 .gem_free_object
= i915_gem_free_object
,
1000 .gem_vm_ops
= &i915_gem_vm_ops
,
1002 .prime_handle_to_fd
= drm_gem_prime_handle_to_fd
,
1003 .prime_fd_to_handle
= drm_gem_prime_fd_to_handle
,
1004 .gem_prime_export
= i915_gem_prime_export
,
1005 .gem_prime_import
= i915_gem_prime_import
,
1007 .dumb_create
= i915_gem_dumb_create
,
1008 .dumb_map_offset
= i915_gem_mmap_gtt
,
1009 .dumb_destroy
= drm_gem_dumb_destroy
,
1010 .ioctls
= i915_ioctls
,
1011 .fops
= &i915_driver_fops
,
1012 .name
= DRIVER_NAME
,
1013 .desc
= DRIVER_DESC
,
1014 .date
= DRIVER_DATE
,
1015 .major
= DRIVER_MAJOR
,
1016 .minor
= DRIVER_MINOR
,
1017 .patchlevel
= DRIVER_PATCHLEVEL
,
1020 static struct pci_driver i915_pci_driver
= {
1021 .name
= DRIVER_NAME
,
1022 .id_table
= pciidlist
,
1023 .probe
= i915_pci_probe
,
1024 .remove
= i915_pci_remove
,
1025 .driver
.pm
= &i915_pm_ops
,
1028 static int __init
i915_init(void)
1030 driver
.num_ioctls
= i915_max_ioctl
;
1033 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
1034 * explicitly disabled with the module pararmeter.
1036 * Otherwise, just follow the parameter (defaulting to off).
1038 * Allow optional vga_text_mode_force boot option to override
1039 * the default behavior.
1041 #if defined(CONFIG_DRM_I915_KMS)
1042 if (i915_modeset
!= 0)
1043 driver
.driver_features
|= DRIVER_MODESET
;
1045 if (i915_modeset
== 1)
1046 driver
.driver_features
|= DRIVER_MODESET
;
1048 #ifdef CONFIG_VGA_CONSOLE
1049 if (vgacon_text_force() && i915_modeset
== -1)
1050 driver
.driver_features
&= ~DRIVER_MODESET
;
1053 if (!(driver
.driver_features
& DRIVER_MODESET
)) {
1054 driver
.get_vblank_timestamp
= NULL
;
1055 #ifndef CONFIG_DRM_I915_UMS
1056 /* Silently fail loading to not upset userspace. */
1061 return drm_pci_init(&driver
, &i915_pci_driver
);
1064 static void __exit
i915_exit(void)
1066 #ifndef CONFIG_DRM_I915_UMS
1067 if (!(driver
.driver_features
& DRIVER_MODESET
))
1068 return; /* Never loaded a driver. */
1071 drm_pci_exit(&driver
, &i915_pci_driver
);
1074 module_init(i915_init
);
1075 module_exit(i915_exit
);
1077 MODULE_AUTHOR(DRIVER_AUTHOR
);
1078 MODULE_DESCRIPTION(DRIVER_DESC
);
1079 MODULE_LICENSE("GPL and additional rights");