drivers/gpu/drm/i915/i915_irq.c

   1 /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
   2  */
   3 /*
   4  * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
   5  * All Rights Reserved.
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a
   8  * copy of this software and associated documentation files (the
   9  * "Software"), to deal in the Software without restriction, including
  10  * without limitation the rights to use, copy, modify, merge, publish,
  11  * distribute, sub license, and/or sell copies of the Software, and to
  12  * permit persons to whom the Software is furnished to do so, subject to
  13  * the following conditions:
  14  *
  15  * The above copyright notice and this permission notice (including the
  16  * next paragraph) shall be included in all copies or substantial portions
  17  * of the Software.
  18  *
  19  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  20  * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  21  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
  22  * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
  23  * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
  24  * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
  25  * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  26  *
  27  */
  28
  29 #include "drmP.h"
  30 #include "drm.h"
  31 #include "i915_drm.h"
  32 #include "i915_drv.h"
  33 #include "intel_drv.h"
  34
  35 #define MAX_NOPID ((u32)~0)
  36
  37 /**
  38  * Interrupts that are always left unmasked.
  39  *
  40  * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
  41  * we leave them always unmasked in IMR and then control enabling them through
  42  * PIPESTAT alone.
  43  */
  44 #define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
  45                                    I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |  \
  46                                    I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
  47
  48 /** Interrupts that we mask and unmask at runtime. */
  49 #define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
  50
  51 #define I915_PIPE_VBLANK_STATUS (PIPE_START_VBLANK_INTERRUPT_STATUS |\
  52                                  PIPE_VBLANK_INTERRUPT_STATUS)
  53
  54 #define I915_PIPE_VBLANK_ENABLE (PIPE_START_VBLANK_INTERRUPT_ENABLE |\
  55                                  PIPE_VBLANK_INTERRUPT_ENABLE)
  56
  57 #define DRM_I915_VBLANK_PIPE_ALL        (DRM_I915_VBLANK_PIPE_A | \
  58                                          DRM_I915_VBLANK_PIPE_B)
  59
  60 void
  61 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
  62 {
  63         if ((dev_priv->irq_mask_reg & mask) != 0) {
  64                 dev_priv->irq_mask_reg &= ~mask;
  65                 I915_WRITE(IMR, dev_priv->irq_mask_reg);
  66                 (void) I915_READ(IMR);
  67         }
  68 }
  69
  70 static inline void
  71 i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
  72 {
  73         if ((dev_priv->irq_mask_reg & mask) != mask) {
  74                 dev_priv->irq_mask_reg |= mask;
  75                 I915_WRITE(IMR, dev_priv->irq_mask_reg);
  76                 (void) I915_READ(IMR);
  77         }
  78 }
  79
  80 static inline u32
  81 i915_pipestat(int pipe)
  82 {
  83         if (pipe == 0)
  84                 return PIPEASTAT;
  85         if (pipe == 1)
  86                 return PIPEBSTAT;
  87         BUG();
  88 }
  89
  90 void
  91 i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
  92 {
  93         if ((dev_priv->pipestat[pipe] & mask) != mask) {
  94                 u32 reg = i915_pipestat(pipe);
  95
  96                 dev_priv->pipestat[pipe] |= mask;
  97                 /* Enable the interrupt, clear any pending status */
  98                 I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
  99                 (void) I915_READ(reg);
 100         }
 101 }
 102
 103 void
 104 i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
 105 {
 106         if ((dev_priv->pipestat[pipe] & mask) != 0) {
 107                 u32 reg = i915_pipestat(pipe);
 108
 109                 dev_priv->pipestat[pipe] &= ~mask;
 110                 I915_WRITE(reg, dev_priv->pipestat[pipe]);
 111                 (void) I915_READ(reg);
 112         }
 113 }
 114
 115 /**
 116  * i915_pipe_enabled - check if a pipe is enabled
 117  * @dev: DRM device
 118  * @pipe: pipe to check
 119  *
 120  * Reading certain registers when the pipe is disabled can hang the chip.
 121  * Use this routine to make sure the PLL is running and the pipe is active
 122  * before reading such registers if unsure.
 123  */
 124 static int
 125 i915_pipe_enabled(struct drm_device *dev, int pipe)
 126 {
 127         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 128         unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
 129
 130         if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
 131                 return 1;
 132
 133         return 0;
 134 }
 135
 136 /* Called from drm generic code, passed a 'crtc', which
 137  * we use as a pipe index
 138  */
 139 u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
 140 {
 141         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 142         unsigned long high_frame;
 143         unsigned long low_frame;
 144         u32 high1, high2, low, count;
 145
 146         high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
 147         low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
 148
 149         if (!i915_pipe_enabled(dev, pipe)) {
 150                 DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
 151                 return 0;
 152         }
 153
 154         /*
 155          * High & low register fields aren't synchronized, so make sure
 156          * we get a low value that's stable across two reads of the high
 157          * register.
 158          */
 159         do {
 160                 high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
 161                          PIPE_FRAME_HIGH_SHIFT);
 162                 low =  ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
 163                         PIPE_FRAME_LOW_SHIFT);
 164                 high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
 165                          PIPE_FRAME_HIGH_SHIFT);
 166         } while (high1 != high2);
 167
 168         count = (high1 << 8) | low;
 169
 170         return count;
 171 }
 172
 173 u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 174 {
 175         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 176         int reg = pipe ? PIPEB_FRMCOUNT_GM45 : PIPEA_FRMCOUNT_GM45;
 177
 178         if (!i915_pipe_enabled(dev, pipe)) {
 179                 DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe);
 180                 return 0;
 181         }
 182
 183         return I915_READ(reg);
 184 }
 185
 186 /*
 187  * Handle hotplug events outside the interrupt handler proper.
 188  */
 189 static void i915_hotplug_work_func(struct work_struct *work)
 190 {
 191         drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
 192                                                     hotplug_work);
 193         struct drm_device *dev = dev_priv->dev;
 194
 195         /* Just fire off a uevent and let userspace tell us what to do */
 196         drm_sysfs_hotplug_event(dev);
 197 }
 198
 199 irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 200 {
 201         struct drm_device *dev = (struct drm_device *) arg;
 202         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 203         struct drm_i915_master_private *master_priv;
 204         u32 iir, new_iir;
 205         u32 pipea_stats, pipeb_stats;
 206         u32 vblank_status;
 207         u32 vblank_enable;
 208         int vblank = 0;
 209         unsigned long irqflags;
 210         int irq_received;
 211         int ret = IRQ_NONE;
 212
 213         atomic_inc(&dev_priv->irq_received);
 214
 215         iir = I915_READ(IIR);
 216
 217         if (IS_I965G(dev)) {
 218                 vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
 219                 vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
 220         } else {
 221                 vblank_status = I915_VBLANK_INTERRUPT_STATUS;
 222                 vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
 223         }
 224
 225         for (;;) {
 226                 irq_received = iir != 0;
 227
 228                 /* Can't rely on pipestat interrupt bit in iir as it might
 229                  * have been cleared after the pipestat interrupt was received.
 230                  * It doesn't set the bit in iir again, but it still produces
 231                  * interrupts (for non-MSI).
 232                  */
 233                 spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 234                 pipea_stats = I915_READ(PIPEASTAT);
 235                 pipeb_stats = I915_READ(PIPEBSTAT);
 236
 237                 /*
 238                  * Clear the PIPE(A|B)STAT regs before the IIR
 239                  */
 240                 if (pipea_stats & 0x8000ffff) {
 241                         I915_WRITE(PIPEASTAT, pipea_stats);
 242                         irq_received = 1;
 243                 }
 244
 245                 if (pipeb_stats & 0x8000ffff) {
 246                         I915_WRITE(PIPEBSTAT, pipeb_stats);
 247                         irq_received = 1;
 248                 }
 249                 spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 250
 251                 if (!irq_received)
 252                         break;
 253
 254                 ret = IRQ_HANDLED;
 255
 256                 /* Consume port.  Then clear IIR or we'll miss events */
 257                 if ((I915_HAS_HOTPLUG(dev)) &&
 258                     (iir & I915_DISPLAY_PORT_INTERRUPT)) {
 259                         u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 260
 261                         DRM_DEBUG("hotplug event received, stat 0x%08x\n",
 262                                   hotplug_status);
 263                         if (hotplug_status & dev_priv->hotplug_supported_mask)
 264                                 schedule_work(&dev_priv->hotplug_work);
 265
 266                         I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
 267                         I915_READ(PORT_HOTPLUG_STAT);
 268                 }
 269
 270                 I915_WRITE(IIR, iir);
 271                 new_iir = I915_READ(IIR); /* Flush posted writes */
 272
 273                 if (dev->primary->master) {
 274                         master_priv = dev->primary->master->driver_priv;
 275                         if (master_priv->sarea_priv)
 276                                 master_priv->sarea_priv->last_dispatch =
 277                                         READ_BREADCRUMB(dev_priv);
 278                 }
 279
 280                 if (iir & I915_USER_INTERRUPT) {
 281                         dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
 282                         DRM_WAKEUP(&dev_priv->irq_queue);
 283                 }
 284
 285                 if (pipea_stats & vblank_status) {
 286                         vblank++;
 287                         drm_handle_vblank(dev, 0);
 288                 }
 289
 290                 if (pipeb_stats & vblank_status) {
 291                         vblank++;
 292                         drm_handle_vblank(dev, 1);
 293                 }
 294
 295                 if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
 296                     (iir & I915_ASLE_INTERRUPT))
 297                         opregion_asle_intr(dev);
 298
 299                 /* With MSI, interrupts are only generated when iir
 300                  * transitions from zero to nonzero.  If another bit got
 301                  * set while we were handling the existing iir bits, then
 302                  * we would never get another interrupt.
 303                  *
 304                  * This is fine on non-MSI as well, as if we hit this path
 305                  * we avoid exiting the interrupt handler only to generate
 306                  * another one.
 307                  *
 308                  * Note that for MSI this could cause a stray interrupt report
 309                  * if an interrupt landed in the time between writing IIR and
 310                  * the posting read.  This should be rare enough to never
 311                  * trigger the 99% of 100,000 interrupts test for disabling
 312                  * stray interrupts.
 313                  */
 314                 iir = new_iir;
 315         }
 316
 317         return ret;
 318 }
 319
 320 static int i915_emit_irq(struct drm_device * dev)
 321 {
 322         drm_i915_private_t *dev_priv = dev->dev_private;
 323         struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
 324         RING_LOCALS;
 325
 326         i915_kernel_lost_context(dev);
 327
 328         DRM_DEBUG("\n");
 329
 330         dev_priv->counter++;
 331         if (dev_priv->counter > 0x7FFFFFFFUL)
 332                 dev_priv->counter = 1;
 333         if (master_priv->sarea_priv)
 334                 master_priv->sarea_priv->last_enqueue = dev_priv->counter;
 335
 336         BEGIN_LP_RING(4);
 337         OUT_RING(MI_STORE_DWORD_INDEX);
 338         OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
 339         OUT_RING(dev_priv->counter);
 340         OUT_RING(MI_USER_INTERRUPT);
 341         ADVANCE_LP_RING();
 342
 343         return dev_priv->counter;
 344 }
 345
 346 void i915_user_irq_get(struct drm_device *dev)
 347 {
 348         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 349         unsigned long irqflags;
 350
 351         spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 352         if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1))
 353                 i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
 354         spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 355 }
 356
 357 void i915_user_irq_put(struct drm_device *dev)
 358 {
 359         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 360         unsigned long irqflags;
 361
 362         spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 363         BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
 364         if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0))
 365                 i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
 366         spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 367 }
 368
 369 static int i915_wait_irq(struct drm_device * dev, int irq_nr)
 370 {
 371         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 372         struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
 373         int ret = 0;
 374
 375         DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr,
 376                   READ_BREADCRUMB(dev_priv));
 377
 378         if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
 379                 if (master_priv->sarea_priv)
 380                         master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 381                 return 0;
 382         }
 383
 384         if (master_priv->sarea_priv)
 385                 master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
 386
 387         i915_user_irq_get(dev);
 388         DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ,
 389                     READ_BREADCRUMB(dev_priv) >= irq_nr);
 390         i915_user_irq_put(dev);
 391
 392         if (ret == -EBUSY) {
 393                 DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
 394                           READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
 395         }
 396
 397         return ret;
 398 }
 399
 400 /* Needs the lock as it touches the ring.
 401  */
 402 int i915_irq_emit(struct drm_device *dev, void *data,
 403                          struct drm_file *file_priv)
 404 {
 405         drm_i915_private_t *dev_priv = dev->dev_private;
 406         drm_i915_irq_emit_t *emit = data;
 407         int result;
 408
 409         if (!dev_priv || !dev_priv->ring.virtual_start) {
 410                 DRM_ERROR("called with no initialization\n");
 411                 return -EINVAL;
 412         }
 413
 414         RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
 415
 416         mutex_lock(&dev->struct_mutex);
 417         result = i915_emit_irq(dev);
 418         mutex_unlock(&dev->struct_mutex);
 419
 420         if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
 421                 DRM_ERROR("copy_to_user\n");
 422                 return -EFAULT;
 423         }
 424
 425         return 0;
 426 }
 427
 428 /* Doesn't need the hardware lock.
 429  */
 430 int i915_irq_wait(struct drm_device *dev, void *data,
 431                          struct drm_file *file_priv)
 432 {
 433         drm_i915_private_t *dev_priv = dev->dev_private;
 434         drm_i915_irq_wait_t *irqwait = data;
 435
 436         if (!dev_priv) {
 437                 DRM_ERROR("called with no initialization\n");
 438                 return -EINVAL;
 439         }
 440
 441         return i915_wait_irq(dev, irqwait->irq_seq);
 442 }
 443
 444 /* Called from drm generic code, passed 'crtc' which
 445  * we use as a pipe index
 446  */
 447 int i915_enable_vblank(struct drm_device *dev, int pipe)
 448 {
 449         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 450         unsigned long irqflags;
 451         int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
 452         u32 pipeconf;
 453
 454         pipeconf = I915_READ(pipeconf_reg);
 455         if (!(pipeconf & PIPEACONF_ENABLE))
 456                 return -EINVAL;
 457
 458         spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 459         if (IS_I965G(dev))
 460                 i915_enable_pipestat(dev_priv, pipe,
 461                                      PIPE_START_VBLANK_INTERRUPT_ENABLE);
 462         else
 463                 i915_enable_pipestat(dev_priv, pipe,
 464                                      PIPE_VBLANK_INTERRUPT_ENABLE);
 465         spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 466         return 0;
 467 }
 468
 469 /* Called from drm generic code, passed 'crtc' which
 470  * we use as a pipe index
 471  */
 472 void i915_disable_vblank(struct drm_device *dev, int pipe)
 473 {
 474         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 475         unsigned long irqflags;
 476
 477         spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 478         i915_disable_pipestat(dev_priv, pipe,
 479                               PIPE_VBLANK_INTERRUPT_ENABLE |
 480                               PIPE_START_VBLANK_INTERRUPT_ENABLE);
 481         spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 482 }
 483
 484 void i915_enable_interrupt (struct drm_device *dev)
 485 {
 486         struct drm_i915_private *dev_priv = dev->dev_private;
 487         opregion_enable_asle(dev);
 488         dev_priv->irq_enabled = 1;
 489 }
 490
 491
 492 /* Set the vblank monitor pipe
 493  */
 494 int i915_vblank_pipe_set(struct drm_device *dev, void *data,
 495                          struct drm_file *file_priv)
 496 {
 497         drm_i915_private_t *dev_priv = dev->dev_private;
 498
 499         if (!dev_priv) {
 500                 DRM_ERROR("called with no initialization\n");
 501                 return -EINVAL;
 502         }
 503
 504         return 0;
 505 }
 506
 507 int i915_vblank_pipe_get(struct drm_device *dev, void *data,
 508                          struct drm_file *file_priv)
 509 {
 510         drm_i915_private_t *dev_priv = dev->dev_private;
 511         drm_i915_vblank_pipe_t *pipe = data;
 512
 513         if (!dev_priv) {
 514                 DRM_ERROR("called with no initialization\n");
 515                 return -EINVAL;
 516         }
 517
 518         pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 519
 520         return 0;
 521 }
 522
 523 /**
 524  * Schedule buffer swap at given vertical blank.
 525  */
 526 int i915_vblank_swap(struct drm_device *dev, void *data,
 527                      struct drm_file *file_priv)
 528 {
 529         /* The delayed swap mechanism was fundamentally racy, and has been
 530          * removed.  The model was that the client requested a delayed flip/swap
 531          * from the kernel, then waited for vblank before continuing to perform
 532          * rendering.  The problem was that the kernel might wake the client
 533          * up before it dispatched the vblank swap (since the lock has to be
 534          * held while touching the ringbuffer), in which case the client would
 535          * clear and start the next frame before the swap occurred, and
 536          * flicker would occur in addition to likely missing the vblank.
 537          *
 538          * In the absence of this ioctl, userland falls back to a correct path
 539          * of waiting for a vblank, then dispatching the swap on its own.
 540          * Context switching to userland and back is plenty fast enough for
 541          * meeting the requirements of vblank swapping.
 542          */
 543         return -EINVAL;
 544 }
 545
 546 /* drm_dma.h hooks
 547 */
 548 void i915_driver_irq_preinstall(struct drm_device * dev)
 549 {
 550         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 551
 552         atomic_set(&dev_priv->irq_received, 0);
 553
 554         if (I915_HAS_HOTPLUG(dev)) {
 555                 I915_WRITE(PORT_HOTPLUG_EN, 0);
 556                 I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 557         }
 558
 559         I915_WRITE(HWSTAM, 0xeffe);
 560         I915_WRITE(PIPEASTAT, 0);
 561         I915_WRITE(PIPEBSTAT, 0);
 562         I915_WRITE(IMR, 0xffffffff);
 563         I915_WRITE(IER, 0x0);
 564         (void) I915_READ(IER);
 565         INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 566 }
 567
 568 int i915_driver_irq_postinstall(struct drm_device *dev)
 569 {
 570         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 571         u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
 572
 573         dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
 574
 575         dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
 576
 577         /* Unmask the interrupts that we always want on. */
 578         dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
 579
 580         dev_priv->pipestat[0] = 0;
 581         dev_priv->pipestat[1] = 0;
 582
 583         if (I915_HAS_HOTPLUG(dev)) {
 584                 u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
 585
 586                 /* Leave other bits alone */
 587                 hotplug_en |= HOTPLUG_EN_MASK;
 588                 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 589
 590                 dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
 591                         TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
 592                         SDVOB_HOTPLUG_INT_STATUS;
 593                 if (IS_G4X(dev)) {
 594                         dev_priv->hotplug_supported_mask |=
 595                                 HDMIB_HOTPLUG_INT_STATUS |
 596                                 HDMIC_HOTPLUG_INT_STATUS |
 597                                 HDMID_HOTPLUG_INT_STATUS;
 598                 }
 599                 /* Enable in IER... */
 600                 enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
 601                 /* and unmask in IMR */
 602                 i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
 603         }
 604
 605         /* Disable pipe interrupt enables, clear pending pipe status */
 606         I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
 607         I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
 608         /* Clear pending interrupt status */
 609         I915_WRITE(IIR, I915_READ(IIR));
 610
 611         I915_WRITE(IER, enable_mask);
 612         I915_WRITE(IMR, dev_priv->irq_mask_reg);
 613         (void) I915_READ(IER);
 614
 615         opregion_enable_asle(dev);
 616         DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
 617
 618         return 0;
 619 }
 620
 621 void i915_driver_irq_uninstall(struct drm_device * dev)
 622 {
 623         drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 624
 625         if (!dev_priv)
 626                 return;
 627
 628         dev_priv->vblank_pipe = 0;
 629
 630         if (I915_HAS_HOTPLUG(dev)) {
 631                 I915_WRITE(PORT_HOTPLUG_EN, 0);
 632                 I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 633         }
 634
 635         I915_WRITE(HWSTAM, 0xffffffff);
 636         I915_WRITE(PIPEASTAT, 0);
 637         I915_WRITE(PIPEBSTAT, 0);
 638         I915_WRITE(IMR, 0xffffffff);
 639         I915_WRITE(IER, 0x0);
 640
 641         I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
 642         I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
 643         I915_WRITE(IIR, I915_READ(IIR));
 644 }