1 /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
4 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
7 * Permission is hereby granted, free of charge, to any person obtaining a
8 * copy of this software and associated documentation files (the
9 * "Software"), to deal in the Software without restriction, including
10 * without limitation the rights to use, copy, modify, merge, publish,
11 * distribute, sub license, and/or sell copies of the Software, and to
12 * permit persons to whom the Software is furnished to do so, subject to
13 * the following conditions:
15 * The above copyright notice and this permission notice (including the
16 * next paragraph) shall be included in all copies or substantial portions
19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
20 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
21 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
22 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
23 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
24 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
25 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31 #include <linux/sysrq.h>
32 #include <linux/slab.h>
33 #include <linux/circ_buf.h>
35 #include <drm/i915_drm.h>
37 #include "i915_trace.h"
38 #include "intel_drv.h"
40 static const u32 hpd_ibx
[] = {
41 [HPD_CRT
] = SDE_CRT_HOTPLUG
,
42 [HPD_SDVO_B
] = SDE_SDVOB_HOTPLUG
,
43 [HPD_PORT_B
] = SDE_PORTB_HOTPLUG
,
44 [HPD_PORT_C
] = SDE_PORTC_HOTPLUG
,
45 [HPD_PORT_D
] = SDE_PORTD_HOTPLUG
48 static const u32 hpd_cpt
[] = {
49 [HPD_CRT
] = SDE_CRT_HOTPLUG_CPT
,
50 [HPD_SDVO_B
] = SDE_SDVOB_HOTPLUG_CPT
,
51 [HPD_PORT_B
] = SDE_PORTB_HOTPLUG_CPT
,
52 [HPD_PORT_C
] = SDE_PORTC_HOTPLUG_CPT
,
53 [HPD_PORT_D
] = SDE_PORTD_HOTPLUG_CPT
56 static const u32 hpd_mask_i915
[] = {
57 [HPD_CRT
] = CRT_HOTPLUG_INT_EN
,
58 [HPD_SDVO_B
] = SDVOB_HOTPLUG_INT_EN
,
59 [HPD_SDVO_C
] = SDVOC_HOTPLUG_INT_EN
,
60 [HPD_PORT_B
] = PORTB_HOTPLUG_INT_EN
,
61 [HPD_PORT_C
] = PORTC_HOTPLUG_INT_EN
,
62 [HPD_PORT_D
] = PORTD_HOTPLUG_INT_EN
65 static const u32 hpd_status_g4x
[] = {
66 [HPD_CRT
] = CRT_HOTPLUG_INT_STATUS
,
67 [HPD_SDVO_B
] = SDVOB_HOTPLUG_INT_STATUS_G4X
,
68 [HPD_SDVO_C
] = SDVOC_HOTPLUG_INT_STATUS_G4X
,
69 [HPD_PORT_B
] = PORTB_HOTPLUG_INT_STATUS
,
70 [HPD_PORT_C
] = PORTC_HOTPLUG_INT_STATUS
,
71 [HPD_PORT_D
] = PORTD_HOTPLUG_INT_STATUS
74 static const u32 hpd_status_i915
[] = { /* i915 and valleyview are the same */
75 [HPD_CRT
] = CRT_HOTPLUG_INT_STATUS
,
76 [HPD_SDVO_B
] = SDVOB_HOTPLUG_INT_STATUS_I915
,
77 [HPD_SDVO_C
] = SDVOC_HOTPLUG_INT_STATUS_I915
,
78 [HPD_PORT_B
] = PORTB_HOTPLUG_INT_STATUS
,
79 [HPD_PORT_C
] = PORTC_HOTPLUG_INT_STATUS
,
80 [HPD_PORT_D
] = PORTD_HOTPLUG_INT_STATUS
83 /* IIR can theoretically queue up two events. Be paranoid. */
84 #define GEN8_IRQ_RESET_NDX(type, which) do { \
85 I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
86 POSTING_READ(GEN8_##type##_IMR(which)); \
87 I915_WRITE(GEN8_##type##_IER(which), 0); \
88 I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
89 POSTING_READ(GEN8_##type##_IIR(which)); \
90 I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
91 POSTING_READ(GEN8_##type##_IIR(which)); \
94 #define GEN5_IRQ_RESET(type) do { \
95 I915_WRITE(type##IMR, 0xffffffff); \
96 POSTING_READ(type##IMR); \
97 I915_WRITE(type##IER, 0); \
98 I915_WRITE(type##IIR, 0xffffffff); \
99 POSTING_READ(type##IIR); \
100 I915_WRITE(type##IIR, 0xffffffff); \
101 POSTING_READ(type##IIR); \
105 * We should clear IMR at preinstall/uninstall, and just check at postinstall.
107 #define GEN5_ASSERT_IIR_IS_ZERO(reg) do { \
108 u32 val = I915_READ(reg); \
110 WARN(1, "Interrupt register 0x%x is not zero: 0x%08x\n", \
112 I915_WRITE((reg), 0xffffffff); \
114 I915_WRITE((reg), 0xffffffff); \
119 #define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \
120 GEN5_ASSERT_IIR_IS_ZERO(GEN8_##type##_IIR(which)); \
121 I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \
122 I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \
123 POSTING_READ(GEN8_##type##_IER(which)); \
126 #define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \
127 GEN5_ASSERT_IIR_IS_ZERO(type##IIR); \
128 I915_WRITE(type##IMR, (imr_val)); \
129 I915_WRITE(type##IER, (ier_val)); \
130 POSTING_READ(type##IER); \
133 /* For display hotplug interrupt */
135 ironlake_enable_display_irq(struct drm_i915_private
*dev_priv
, u32 mask
)
137 assert_spin_locked(&dev_priv
->irq_lock
);
139 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
142 if ((dev_priv
->irq_mask
& mask
) != 0) {
143 dev_priv
->irq_mask
&= ~mask
;
144 I915_WRITE(DEIMR
, dev_priv
->irq_mask
);
150 ironlake_disable_display_irq(struct drm_i915_private
*dev_priv
, u32 mask
)
152 assert_spin_locked(&dev_priv
->irq_lock
);
154 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
157 if ((dev_priv
->irq_mask
& mask
) != mask
) {
158 dev_priv
->irq_mask
|= mask
;
159 I915_WRITE(DEIMR
, dev_priv
->irq_mask
);
165 * ilk_update_gt_irq - update GTIMR
166 * @dev_priv: driver private
167 * @interrupt_mask: mask of interrupt bits to update
168 * @enabled_irq_mask: mask of interrupt bits to enable
170 static void ilk_update_gt_irq(struct drm_i915_private
*dev_priv
,
171 uint32_t interrupt_mask
,
172 uint32_t enabled_irq_mask
)
174 assert_spin_locked(&dev_priv
->irq_lock
);
176 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
179 dev_priv
->gt_irq_mask
&= ~interrupt_mask
;
180 dev_priv
->gt_irq_mask
|= (~enabled_irq_mask
& interrupt_mask
);
181 I915_WRITE(GTIMR
, dev_priv
->gt_irq_mask
);
185 void gen5_enable_gt_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
187 ilk_update_gt_irq(dev_priv
, mask
, mask
);
190 void gen5_disable_gt_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
192 ilk_update_gt_irq(dev_priv
, mask
, 0);
196 * snb_update_pm_irq - update GEN6_PMIMR
197 * @dev_priv: driver private
198 * @interrupt_mask: mask of interrupt bits to update
199 * @enabled_irq_mask: mask of interrupt bits to enable
201 static void snb_update_pm_irq(struct drm_i915_private
*dev_priv
,
202 uint32_t interrupt_mask
,
203 uint32_t enabled_irq_mask
)
207 assert_spin_locked(&dev_priv
->irq_lock
);
209 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
212 new_val
= dev_priv
->pm_irq_mask
;
213 new_val
&= ~interrupt_mask
;
214 new_val
|= (~enabled_irq_mask
& interrupt_mask
);
216 if (new_val
!= dev_priv
->pm_irq_mask
) {
217 dev_priv
->pm_irq_mask
= new_val
;
218 I915_WRITE(GEN6_PMIMR
, dev_priv
->pm_irq_mask
);
219 POSTING_READ(GEN6_PMIMR
);
223 void gen6_enable_pm_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
225 snb_update_pm_irq(dev_priv
, mask
, mask
);
228 void gen6_disable_pm_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
230 snb_update_pm_irq(dev_priv
, mask
, 0);
233 static bool ivb_can_enable_err_int(struct drm_device
*dev
)
235 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
236 struct intel_crtc
*crtc
;
239 assert_spin_locked(&dev_priv
->irq_lock
);
241 for_each_pipe(dev_priv
, pipe
) {
242 crtc
= to_intel_crtc(dev_priv
->pipe_to_crtc_mapping
[pipe
]);
244 if (crtc
->cpu_fifo_underrun_disabled
)
252 * bdw_update_pm_irq - update GT interrupt 2
253 * @dev_priv: driver private
254 * @interrupt_mask: mask of interrupt bits to update
255 * @enabled_irq_mask: mask of interrupt bits to enable
257 * Copied from the snb function, updated with relevant register offsets
259 static void bdw_update_pm_irq(struct drm_i915_private
*dev_priv
,
260 uint32_t interrupt_mask
,
261 uint32_t enabled_irq_mask
)
265 assert_spin_locked(&dev_priv
->irq_lock
);
267 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
270 new_val
= dev_priv
->pm_irq_mask
;
271 new_val
&= ~interrupt_mask
;
272 new_val
|= (~enabled_irq_mask
& interrupt_mask
);
274 if (new_val
!= dev_priv
->pm_irq_mask
) {
275 dev_priv
->pm_irq_mask
= new_val
;
276 I915_WRITE(GEN8_GT_IMR(2), dev_priv
->pm_irq_mask
);
277 POSTING_READ(GEN8_GT_IMR(2));
281 void gen8_enable_pm_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
283 bdw_update_pm_irq(dev_priv
, mask
, mask
);
286 void gen8_disable_pm_irq(struct drm_i915_private
*dev_priv
, uint32_t mask
)
288 bdw_update_pm_irq(dev_priv
, mask
, 0);
291 static bool cpt_can_enable_serr_int(struct drm_device
*dev
)
293 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
295 struct intel_crtc
*crtc
;
297 assert_spin_locked(&dev_priv
->irq_lock
);
299 for_each_pipe(dev_priv
, pipe
) {
300 crtc
= to_intel_crtc(dev_priv
->pipe_to_crtc_mapping
[pipe
]);
302 if (crtc
->pch_fifo_underrun_disabled
)
309 void i9xx_check_fifo_underruns(struct drm_device
*dev
)
311 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
312 struct intel_crtc
*crtc
;
315 spin_lock_irqsave(&dev_priv
->irq_lock
, flags
);
317 for_each_intel_crtc(dev
, crtc
) {
318 u32 reg
= PIPESTAT(crtc
->pipe
);
321 if (crtc
->cpu_fifo_underrun_disabled
)
324 pipestat
= I915_READ(reg
) & 0xffff0000;
325 if ((pipestat
& PIPE_FIFO_UNDERRUN_STATUS
) == 0)
328 I915_WRITE(reg
, pipestat
| PIPE_FIFO_UNDERRUN_STATUS
);
331 DRM_ERROR("pipe %c underrun\n", pipe_name(crtc
->pipe
));
334 spin_unlock_irqrestore(&dev_priv
->irq_lock
, flags
);
337 static void i9xx_set_fifo_underrun_reporting(struct drm_device
*dev
,
339 bool enable
, bool old
)
341 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
342 u32 reg
= PIPESTAT(pipe
);
343 u32 pipestat
= I915_READ(reg
) & 0xffff0000;
345 assert_spin_locked(&dev_priv
->irq_lock
);
348 I915_WRITE(reg
, pipestat
| PIPE_FIFO_UNDERRUN_STATUS
);
351 if (old
&& pipestat
& PIPE_FIFO_UNDERRUN_STATUS
)
352 DRM_ERROR("pipe %c underrun\n", pipe_name(pipe
));
356 static void ironlake_set_fifo_underrun_reporting(struct drm_device
*dev
,
357 enum pipe pipe
, bool enable
)
359 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
360 uint32_t bit
= (pipe
== PIPE_A
) ? DE_PIPEA_FIFO_UNDERRUN
:
361 DE_PIPEB_FIFO_UNDERRUN
;
364 ironlake_enable_display_irq(dev_priv
, bit
);
366 ironlake_disable_display_irq(dev_priv
, bit
);
369 static void ivybridge_set_fifo_underrun_reporting(struct drm_device
*dev
,
371 bool enable
, bool old
)
373 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
375 I915_WRITE(GEN7_ERR_INT
, ERR_INT_FIFO_UNDERRUN(pipe
));
377 if (!ivb_can_enable_err_int(dev
))
380 ironlake_enable_display_irq(dev_priv
, DE_ERR_INT_IVB
);
382 ironlake_disable_display_irq(dev_priv
, DE_ERR_INT_IVB
);
385 I915_READ(GEN7_ERR_INT
) & ERR_INT_FIFO_UNDERRUN(pipe
)) {
386 DRM_ERROR("uncleared fifo underrun on pipe %c\n",
392 static void broadwell_set_fifo_underrun_reporting(struct drm_device
*dev
,
393 enum pipe pipe
, bool enable
)
395 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
397 assert_spin_locked(&dev_priv
->irq_lock
);
400 dev_priv
->de_irq_mask
[pipe
] &= ~GEN8_PIPE_FIFO_UNDERRUN
;
402 dev_priv
->de_irq_mask
[pipe
] |= GEN8_PIPE_FIFO_UNDERRUN
;
403 I915_WRITE(GEN8_DE_PIPE_IMR(pipe
), dev_priv
->de_irq_mask
[pipe
]);
404 POSTING_READ(GEN8_DE_PIPE_IMR(pipe
));
408 * ibx_display_interrupt_update - update SDEIMR
409 * @dev_priv: driver private
410 * @interrupt_mask: mask of interrupt bits to update
411 * @enabled_irq_mask: mask of interrupt bits to enable
413 static void ibx_display_interrupt_update(struct drm_i915_private
*dev_priv
,
414 uint32_t interrupt_mask
,
415 uint32_t enabled_irq_mask
)
417 uint32_t sdeimr
= I915_READ(SDEIMR
);
418 sdeimr
&= ~interrupt_mask
;
419 sdeimr
|= (~enabled_irq_mask
& interrupt_mask
);
421 assert_spin_locked(&dev_priv
->irq_lock
);
423 if (WARN_ON(!intel_irqs_enabled(dev_priv
)))
426 I915_WRITE(SDEIMR
, sdeimr
);
427 POSTING_READ(SDEIMR
);
429 #define ibx_enable_display_interrupt(dev_priv, bits) \
430 ibx_display_interrupt_update((dev_priv), (bits), (bits))
431 #define ibx_disable_display_interrupt(dev_priv, bits) \
432 ibx_display_interrupt_update((dev_priv), (bits), 0)
434 static void ibx_set_fifo_underrun_reporting(struct drm_device
*dev
,
435 enum transcoder pch_transcoder
,
438 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
439 uint32_t bit
= (pch_transcoder
== TRANSCODER_A
) ?
440 SDE_TRANSA_FIFO_UNDER
: SDE_TRANSB_FIFO_UNDER
;
443 ibx_enable_display_interrupt(dev_priv
, bit
);
445 ibx_disable_display_interrupt(dev_priv
, bit
);
448 static void cpt_set_fifo_underrun_reporting(struct drm_device
*dev
,
449 enum transcoder pch_transcoder
,
450 bool enable
, bool old
)
452 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
456 SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder
));
458 if (!cpt_can_enable_serr_int(dev
))
461 ibx_enable_display_interrupt(dev_priv
, SDE_ERROR_CPT
);
463 ibx_disable_display_interrupt(dev_priv
, SDE_ERROR_CPT
);
465 if (old
&& I915_READ(SERR_INT
) &
466 SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder
)) {
467 DRM_ERROR("uncleared pch fifo underrun on pch transcoder %c\n",
468 transcoder_name(pch_transcoder
));
474 * intel_set_cpu_fifo_underrun_reporting - enable/disable FIFO underrun messages
477 * @enable: true if we want to report FIFO underrun errors, false otherwise
479 * This function makes us disable or enable CPU fifo underruns for a specific
480 * pipe. Notice that on some Gens (e.g. IVB, HSW), disabling FIFO underrun
481 * reporting for one pipe may also disable all the other CPU error interruts for
482 * the other pipes, due to the fact that there's just one interrupt mask/enable
483 * bit for all the pipes.
485 * Returns the previous state of underrun reporting.
487 static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device
*dev
,
488 enum pipe pipe
, bool enable
)
490 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
491 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pipe
];
492 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
495 assert_spin_locked(&dev_priv
->irq_lock
);
497 old
= !intel_crtc
->cpu_fifo_underrun_disabled
;
498 intel_crtc
->cpu_fifo_underrun_disabled
= !enable
;
500 if (HAS_GMCH_DISPLAY(dev
))
501 i9xx_set_fifo_underrun_reporting(dev
, pipe
, enable
, old
);
502 else if (IS_GEN5(dev
) || IS_GEN6(dev
))
503 ironlake_set_fifo_underrun_reporting(dev
, pipe
, enable
);
504 else if (IS_GEN7(dev
))
505 ivybridge_set_fifo_underrun_reporting(dev
, pipe
, enable
, old
);
506 else if (IS_GEN8(dev
) || IS_GEN9(dev
))
507 broadwell_set_fifo_underrun_reporting(dev
, pipe
, enable
);
512 bool intel_set_cpu_fifo_underrun_reporting(struct drm_device
*dev
,
513 enum pipe pipe
, bool enable
)
515 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
519 spin_lock_irqsave(&dev_priv
->irq_lock
, flags
);
520 ret
= __intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, enable
);
521 spin_unlock_irqrestore(&dev_priv
->irq_lock
, flags
);
526 static bool __cpu_fifo_underrun_reporting_enabled(struct drm_device
*dev
,
529 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
530 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pipe
];
531 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
533 return !intel_crtc
->cpu_fifo_underrun_disabled
;
537 * intel_set_pch_fifo_underrun_reporting - enable/disable FIFO underrun messages
539 * @pch_transcoder: the PCH transcoder (same as pipe on IVB and older)
540 * @enable: true if we want to report FIFO underrun errors, false otherwise
542 * This function makes us disable or enable PCH fifo underruns for a specific
543 * PCH transcoder. Notice that on some PCHs (e.g. CPT/PPT), disabling FIFO
544 * underrun reporting for one transcoder may also disable all the other PCH
545 * error interruts for the other transcoders, due to the fact that there's just
546 * one interrupt mask/enable bit for all the transcoders.
548 * Returns the previous state of underrun reporting.
550 bool intel_set_pch_fifo_underrun_reporting(struct drm_device
*dev
,
551 enum transcoder pch_transcoder
,
554 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
555 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pch_transcoder
];
556 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
561 * NOTE: Pre-LPT has a fixed cpu pipe -> pch transcoder mapping, but LPT
562 * has only one pch transcoder A that all pipes can use. To avoid racy
563 * pch transcoder -> pipe lookups from interrupt code simply store the
564 * underrun statistics in crtc A. Since we never expose this anywhere
565 * nor use it outside of the fifo underrun code here using the "wrong"
566 * crtc on LPT won't cause issues.
569 spin_lock_irqsave(&dev_priv
->irq_lock
, flags
);
571 old
= !intel_crtc
->pch_fifo_underrun_disabled
;
572 intel_crtc
->pch_fifo_underrun_disabled
= !enable
;
574 if (HAS_PCH_IBX(dev
))
575 ibx_set_fifo_underrun_reporting(dev
, pch_transcoder
, enable
);
577 cpt_set_fifo_underrun_reporting(dev
, pch_transcoder
, enable
, old
);
579 spin_unlock_irqrestore(&dev_priv
->irq_lock
, flags
);
585 __i915_enable_pipestat(struct drm_i915_private
*dev_priv
, enum pipe pipe
,
586 u32 enable_mask
, u32 status_mask
)
588 u32 reg
= PIPESTAT(pipe
);
589 u32 pipestat
= I915_READ(reg
) & PIPESTAT_INT_ENABLE_MASK
;
591 assert_spin_locked(&dev_priv
->irq_lock
);
593 if (WARN_ONCE(enable_mask
& ~PIPESTAT_INT_ENABLE_MASK
||
594 status_mask
& ~PIPESTAT_INT_STATUS_MASK
,
595 "pipe %c: enable_mask=0x%x, status_mask=0x%x\n",
596 pipe_name(pipe
), enable_mask
, status_mask
))
599 if ((pipestat
& enable_mask
) == enable_mask
)
602 dev_priv
->pipestat_irq_mask
[pipe
] |= status_mask
;
604 /* Enable the interrupt, clear any pending status */
605 pipestat
|= enable_mask
| status_mask
;
606 I915_WRITE(reg
, pipestat
);
611 __i915_disable_pipestat(struct drm_i915_private
*dev_priv
, enum pipe pipe
,
612 u32 enable_mask
, u32 status_mask
)
614 u32 reg
= PIPESTAT(pipe
);
615 u32 pipestat
= I915_READ(reg
) & PIPESTAT_INT_ENABLE_MASK
;
617 assert_spin_locked(&dev_priv
->irq_lock
);
619 if (WARN_ONCE(enable_mask
& ~PIPESTAT_INT_ENABLE_MASK
||
620 status_mask
& ~PIPESTAT_INT_STATUS_MASK
,
621 "pipe %c: enable_mask=0x%x, status_mask=0x%x\n",
622 pipe_name(pipe
), enable_mask
, status_mask
))
625 if ((pipestat
& enable_mask
) == 0)
628 dev_priv
->pipestat_irq_mask
[pipe
] &= ~status_mask
;
630 pipestat
&= ~enable_mask
;
631 I915_WRITE(reg
, pipestat
);
635 static u32
vlv_get_pipestat_enable_mask(struct drm_device
*dev
, u32 status_mask
)
637 u32 enable_mask
= status_mask
<< 16;
640 * On pipe A we don't support the PSR interrupt yet,
641 * on pipe B and C the same bit MBZ.
643 if (WARN_ON_ONCE(status_mask
& PIPE_A_PSR_STATUS_VLV
))
646 * On pipe B and C we don't support the PSR interrupt yet, on pipe
647 * A the same bit is for perf counters which we don't use either.
649 if (WARN_ON_ONCE(status_mask
& PIPE_B_PSR_STATUS_VLV
))
652 enable_mask
&= ~(PIPE_FIFO_UNDERRUN_STATUS
|
653 SPRITE0_FLIP_DONE_INT_EN_VLV
|
654 SPRITE1_FLIP_DONE_INT_EN_VLV
);
655 if (status_mask
& SPRITE0_FLIP_DONE_INT_STATUS_VLV
)
656 enable_mask
|= SPRITE0_FLIP_DONE_INT_EN_VLV
;
657 if (status_mask
& SPRITE1_FLIP_DONE_INT_STATUS_VLV
)
658 enable_mask
|= SPRITE1_FLIP_DONE_INT_EN_VLV
;
664 i915_enable_pipestat(struct drm_i915_private
*dev_priv
, enum pipe pipe
,
669 if (IS_VALLEYVIEW(dev_priv
->dev
))
670 enable_mask
= vlv_get_pipestat_enable_mask(dev_priv
->dev
,
673 enable_mask
= status_mask
<< 16;
674 __i915_enable_pipestat(dev_priv
, pipe
, enable_mask
, status_mask
);
678 i915_disable_pipestat(struct drm_i915_private
*dev_priv
, enum pipe pipe
,
683 if (IS_VALLEYVIEW(dev_priv
->dev
))
684 enable_mask
= vlv_get_pipestat_enable_mask(dev_priv
->dev
,
687 enable_mask
= status_mask
<< 16;
688 __i915_disable_pipestat(dev_priv
, pipe
, enable_mask
, status_mask
);
692 * i915_enable_asle_pipestat - enable ASLE pipestat for OpRegion
694 static void i915_enable_asle_pipestat(struct drm_device
*dev
)
696 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
697 unsigned long irqflags
;
699 if (!dev_priv
->opregion
.asle
|| !IS_MOBILE(dev
))
702 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
704 i915_enable_pipestat(dev_priv
, PIPE_B
, PIPE_LEGACY_BLC_EVENT_STATUS
);
705 if (INTEL_INFO(dev
)->gen
>= 4)
706 i915_enable_pipestat(dev_priv
, PIPE_A
,
707 PIPE_LEGACY_BLC_EVENT_STATUS
);
709 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
713 * i915_pipe_enabled - check if a pipe is enabled
715 * @pipe: pipe to check
717 * Reading certain registers when the pipe is disabled can hang the chip.
718 * Use this routine to make sure the PLL is running and the pipe is active
719 * before reading such registers if unsure.
722 i915_pipe_enabled(struct drm_device
*dev
, int pipe
)
724 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
726 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
727 /* Locking is horribly broken here, but whatever. */
728 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pipe
];
729 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
731 return intel_crtc
->active
;
733 return I915_READ(PIPECONF(pipe
)) & PIPECONF_ENABLE
;
738 * This timing diagram depicts the video signal in and
739 * around the vertical blanking period.
741 * Assumptions about the fictitious mode used in this example:
743 * vsync_start = vblank_start + 1
744 * vsync_end = vblank_start + 2
745 * vtotal = vblank_start + 3
748 * latch double buffered registers
749 * increment frame counter (ctg+)
750 * generate start of vblank interrupt (gen4+)
753 * | generate frame start interrupt (aka. vblank interrupt) (gmch)
754 * | may be shifted forward 1-3 extra lines via PIPECONF
756 * | | start of vsync:
757 * | | generate vsync interrupt
759 * ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx___ ___xxxx
760 * . \hs/ . \hs/ \hs/ \hs/ . \hs/
761 * ----va---> <-----------------vb--------------------> <--------va-------------
762 * | | <----vs-----> |
763 * -vbs-----> <---vbs+1---> <---vbs+2---> <-----0-----> <-----1-----> <-----2--- (scanline counter gen2)
764 * -vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2---> <-----0--- (scanline counter gen3+)
765 * -vbs-2---> <---vbs-2---> <---vbs-1---> <---vbs-----> <---vbs+1---> <---vbs+2- (scanline counter hsw+ hdmi)
767 * last visible pixel first visible pixel
768 * | increment frame counter (gen3/4)
769 * pixel counter = vblank_start * htotal pixel counter = 0 (gen3/4)
771 * x = horizontal active
772 * _ = horizontal blanking
773 * hs = horizontal sync
774 * va = vertical active
775 * vb = vertical blanking
777 * vbs = vblank_start (number)
780 * - most events happen at the start of horizontal sync
781 * - frame start happens at the start of horizontal blank, 1-4 lines
782 * (depending on PIPECONF settings) after the start of vblank
783 * - gen3/4 pixel and frame counter are synchronized with the start
784 * of horizontal active on the first line of vertical active
787 static u32
i8xx_get_vblank_counter(struct drm_device
*dev
, int pipe
)
789 /* Gen2 doesn't have a hardware frame counter */
793 /* Called from drm generic code, passed a 'crtc', which
794 * we use as a pipe index
796 static u32
i915_get_vblank_counter(struct drm_device
*dev
, int pipe
)
798 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
799 unsigned long high_frame
;
800 unsigned long low_frame
;
801 u32 high1
, high2
, low
, pixel
, vbl_start
, hsync_start
, htotal
;
803 if (!i915_pipe_enabled(dev
, pipe
)) {
804 DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
805 "pipe %c\n", pipe_name(pipe
));
809 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
810 struct intel_crtc
*intel_crtc
=
811 to_intel_crtc(dev_priv
->pipe_to_crtc_mapping
[pipe
]);
812 const struct drm_display_mode
*mode
=
813 &intel_crtc
->config
.adjusted_mode
;
815 htotal
= mode
->crtc_htotal
;
816 hsync_start
= mode
->crtc_hsync_start
;
817 vbl_start
= mode
->crtc_vblank_start
;
818 if (mode
->flags
& DRM_MODE_FLAG_INTERLACE
)
819 vbl_start
= DIV_ROUND_UP(vbl_start
, 2);
821 enum transcoder cpu_transcoder
= (enum transcoder
) pipe
;
823 htotal
= ((I915_READ(HTOTAL(cpu_transcoder
)) >> 16) & 0x1fff) + 1;
824 hsync_start
= (I915_READ(HSYNC(cpu_transcoder
)) & 0x1fff) + 1;
825 vbl_start
= (I915_READ(VBLANK(cpu_transcoder
)) & 0x1fff) + 1;
826 if ((I915_READ(PIPECONF(cpu_transcoder
)) &
827 PIPECONF_INTERLACE_MASK
) != PIPECONF_PROGRESSIVE
)
828 vbl_start
= DIV_ROUND_UP(vbl_start
, 2);
831 /* Convert to pixel count */
834 /* Start of vblank event occurs at start of hsync */
835 vbl_start
-= htotal
- hsync_start
;
837 high_frame
= PIPEFRAME(pipe
);
838 low_frame
= PIPEFRAMEPIXEL(pipe
);
841 * High & low register fields aren't synchronized, so make sure
842 * we get a low value that's stable across two reads of the high
846 high1
= I915_READ(high_frame
) & PIPE_FRAME_HIGH_MASK
;
847 low
= I915_READ(low_frame
);
848 high2
= I915_READ(high_frame
) & PIPE_FRAME_HIGH_MASK
;
849 } while (high1
!= high2
);
851 high1
>>= PIPE_FRAME_HIGH_SHIFT
;
852 pixel
= low
& PIPE_PIXEL_MASK
;
853 low
>>= PIPE_FRAME_LOW_SHIFT
;
856 * The frame counter increments at beginning of active.
857 * Cook up a vblank counter by also checking the pixel
858 * counter against vblank start.
860 return (((high1
<< 8) | low
) + (pixel
>= vbl_start
)) & 0xffffff;
863 static u32
gm45_get_vblank_counter(struct drm_device
*dev
, int pipe
)
865 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
866 int reg
= PIPE_FRMCOUNT_GM45(pipe
);
868 if (!i915_pipe_enabled(dev
, pipe
)) {
869 DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
870 "pipe %c\n", pipe_name(pipe
));
874 return I915_READ(reg
);
877 /* raw reads, only for fast reads of display block, no need for forcewake etc. */
878 #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
880 static int __intel_get_crtc_scanline(struct intel_crtc
*crtc
)
882 struct drm_device
*dev
= crtc
->base
.dev
;
883 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
884 const struct drm_display_mode
*mode
= &crtc
->config
.adjusted_mode
;
885 enum pipe pipe
= crtc
->pipe
;
886 int position
, vtotal
;
888 vtotal
= mode
->crtc_vtotal
;
889 if (mode
->flags
& DRM_MODE_FLAG_INTERLACE
)
893 position
= __raw_i915_read32(dev_priv
, PIPEDSL(pipe
)) & DSL_LINEMASK_GEN2
;
895 position
= __raw_i915_read32(dev_priv
, PIPEDSL(pipe
)) & DSL_LINEMASK_GEN3
;
898 * See update_scanline_offset() for the details on the
899 * scanline_offset adjustment.
901 return (position
+ crtc
->scanline_offset
) % vtotal
;
904 static int i915_get_crtc_scanoutpos(struct drm_device
*dev
, int pipe
,
905 unsigned int flags
, int *vpos
, int *hpos
,
906 ktime_t
*stime
, ktime_t
*etime
)
908 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
909 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pipe
];
910 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
911 const struct drm_display_mode
*mode
= &intel_crtc
->config
.adjusted_mode
;
913 int vbl_start
, vbl_end
, hsync_start
, htotal
, vtotal
;
916 unsigned long irqflags
;
918 if (!intel_crtc
->active
) {
919 DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
920 "pipe %c\n", pipe_name(pipe
));
924 htotal
= mode
->crtc_htotal
;
925 hsync_start
= mode
->crtc_hsync_start
;
926 vtotal
= mode
->crtc_vtotal
;
927 vbl_start
= mode
->crtc_vblank_start
;
928 vbl_end
= mode
->crtc_vblank_end
;
930 if (mode
->flags
& DRM_MODE_FLAG_INTERLACE
) {
931 vbl_start
= DIV_ROUND_UP(vbl_start
, 2);
936 ret
|= DRM_SCANOUTPOS_VALID
| DRM_SCANOUTPOS_ACCURATE
;
939 * Lock uncore.lock, as we will do multiple timing critical raw
940 * register reads, potentially with preemption disabled, so the
941 * following code must not block on uncore.lock.
943 spin_lock_irqsave(&dev_priv
->uncore
.lock
, irqflags
);
945 /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */
947 /* Get optional system timestamp before query. */
949 *stime
= ktime_get();
951 if (IS_GEN2(dev
) || IS_G4X(dev
) || INTEL_INFO(dev
)->gen
>= 5) {
952 /* No obvious pixelcount register. Only query vertical
953 * scanout position from Display scan line register.
955 position
= __intel_get_crtc_scanline(intel_crtc
);
957 /* Have access to pixelcount since start of frame.
958 * We can split this into vertical and horizontal
961 position
= (__raw_i915_read32(dev_priv
, PIPEFRAMEPIXEL(pipe
)) & PIPE_PIXEL_MASK
) >> PIPE_PIXEL_SHIFT
;
963 /* convert to pixel counts */
969 * In interlaced modes, the pixel counter counts all pixels,
970 * so one field will have htotal more pixels. In order to avoid
971 * the reported position from jumping backwards when the pixel
972 * counter is beyond the length of the shorter field, just
973 * clamp the position the length of the shorter field. This
974 * matches how the scanline counter based position works since
975 * the scanline counter doesn't count the two half lines.
977 if (position
>= vtotal
)
978 position
= vtotal
- 1;
981 * Start of vblank interrupt is triggered at start of hsync,
982 * just prior to the first active line of vblank. However we
983 * consider lines to start at the leading edge of horizontal
984 * active. So, should we get here before we've crossed into
985 * the horizontal active of the first line in vblank, we would
986 * not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that,
987 * always add htotal-hsync_start to the current pixel position.
989 position
= (position
+ htotal
- hsync_start
) % vtotal
;
992 /* Get optional system timestamp after query. */
994 *etime
= ktime_get();
996 /* preempt_enable_rt() should go right here in PREEMPT_RT patchset. */
998 spin_unlock_irqrestore(&dev_priv
->uncore
.lock
, irqflags
);
1000 in_vbl
= position
>= vbl_start
&& position
< vbl_end
;
1003 * While in vblank, position will be negative
1004 * counting up towards 0 at vbl_end. And outside
1005 * vblank, position will be positive counting
1008 if (position
>= vbl_start
)
1009 position
-= vbl_end
;
1011 position
+= vtotal
- vbl_end
;
1013 if (IS_GEN2(dev
) || IS_G4X(dev
) || INTEL_INFO(dev
)->gen
>= 5) {
1017 *vpos
= position
/ htotal
;
1018 *hpos
= position
- (*vpos
* htotal
);
1023 ret
|= DRM_SCANOUTPOS_IN_VBLANK
;
1028 int intel_get_crtc_scanline(struct intel_crtc
*crtc
)
1030 struct drm_i915_private
*dev_priv
= crtc
->base
.dev
->dev_private
;
1031 unsigned long irqflags
;
1034 spin_lock_irqsave(&dev_priv
->uncore
.lock
, irqflags
);
1035 position
= __intel_get_crtc_scanline(crtc
);
1036 spin_unlock_irqrestore(&dev_priv
->uncore
.lock
, irqflags
);
1041 static int i915_get_vblank_timestamp(struct drm_device
*dev
, int pipe
,
1043 struct timeval
*vblank_time
,
1046 struct drm_crtc
*crtc
;
1048 if (pipe
< 0 || pipe
>= INTEL_INFO(dev
)->num_pipes
) {
1049 DRM_ERROR("Invalid crtc %d\n", pipe
);
1053 /* Get drm_crtc to timestamp: */
1054 crtc
= intel_get_crtc_for_pipe(dev
, pipe
);
1056 DRM_ERROR("Invalid crtc %d\n", pipe
);
1060 if (!crtc
->enabled
) {
1061 DRM_DEBUG_KMS("crtc %d is disabled\n", pipe
);
1065 /* Helper routine in DRM core does all the work: */
1066 return drm_calc_vbltimestamp_from_scanoutpos(dev
, pipe
, max_error
,
1069 &to_intel_crtc(crtc
)->config
.adjusted_mode
);
1072 static bool intel_hpd_irq_event(struct drm_device
*dev
,
1073 struct drm_connector
*connector
)
1075 enum drm_connector_status old_status
;
1077 WARN_ON(!mutex_is_locked(&dev
->mode_config
.mutex
));
1078 old_status
= connector
->status
;
1080 connector
->status
= connector
->funcs
->detect(connector
, false);
1081 if (old_status
== connector
->status
)
1084 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
1087 drm_get_connector_status_name(old_status
),
1088 drm_get_connector_status_name(connector
->status
));
1093 static void i915_digport_work_func(struct work_struct
*work
)
1095 struct drm_i915_private
*dev_priv
=
1096 container_of(work
, struct drm_i915_private
, dig_port_work
);
1097 unsigned long irqflags
;
1098 u32 long_port_mask
, short_port_mask
;
1099 struct intel_digital_port
*intel_dig_port
;
1103 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
1104 long_port_mask
= dev_priv
->long_hpd_port_mask
;
1105 dev_priv
->long_hpd_port_mask
= 0;
1106 short_port_mask
= dev_priv
->short_hpd_port_mask
;
1107 dev_priv
->short_hpd_port_mask
= 0;
1108 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
1110 for (i
= 0; i
< I915_MAX_PORTS
; i
++) {
1112 bool long_hpd
= false;
1113 intel_dig_port
= dev_priv
->hpd_irq_port
[i
];
1114 if (!intel_dig_port
|| !intel_dig_port
->hpd_pulse
)
1117 if (long_port_mask
& (1 << i
)) {
1120 } else if (short_port_mask
& (1 << i
))
1124 ret
= intel_dig_port
->hpd_pulse(intel_dig_port
, long_hpd
);
1126 /* if we get true fallback to old school hpd */
1127 old_bits
|= (1 << intel_dig_port
->base
.hpd_pin
);
1133 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
1134 dev_priv
->hpd_event_bits
|= old_bits
;
1135 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
1136 schedule_work(&dev_priv
->hotplug_work
);
1141 * Handle hotplug events outside the interrupt handler proper.
1143 #define I915_REENABLE_HOTPLUG_DELAY (2*60*1000)
1145 static void i915_hotplug_work_func(struct work_struct
*work
)
1147 struct drm_i915_private
*dev_priv
=
1148 container_of(work
, struct drm_i915_private
, hotplug_work
);
1149 struct drm_device
*dev
= dev_priv
->dev
;
1150 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
1151 struct intel_connector
*intel_connector
;
1152 struct intel_encoder
*intel_encoder
;
1153 struct drm_connector
*connector
;
1154 unsigned long irqflags
;
1155 bool hpd_disabled
= false;
1156 bool changed
= false;
1159 mutex_lock(&mode_config
->mutex
);
1160 DRM_DEBUG_KMS("running encoder hotplug functions\n");
1162 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
1164 hpd_event_bits
= dev_priv
->hpd_event_bits
;
1165 dev_priv
->hpd_event_bits
= 0;
1166 list_for_each_entry(connector
, &mode_config
->connector_list
, head
) {
1167 intel_connector
= to_intel_connector(connector
);
1168 if (!intel_connector
->encoder
)
1170 intel_encoder
= intel_connector
->encoder
;
1171 if (intel_encoder
->hpd_pin
> HPD_NONE
&&
1172 dev_priv
->hpd_stats
[intel_encoder
->hpd_pin
].hpd_mark
== HPD_MARK_DISABLED
&&
1173 connector
->polled
== DRM_CONNECTOR_POLL_HPD
) {
1174 DRM_INFO("HPD interrupt storm detected on connector %s: "
1175 "switching from hotplug detection to polling\n",
1177 dev_priv
->hpd_stats
[intel_encoder
->hpd_pin
].hpd_mark
= HPD_DISABLED
;
1178 connector
->polled
= DRM_CONNECTOR_POLL_CONNECT
1179 | DRM_CONNECTOR_POLL_DISCONNECT
;
1180 hpd_disabled
= true;
1182 if (hpd_event_bits
& (1 << intel_encoder
->hpd_pin
)) {
1183 DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
1184 connector
->name
, intel_encoder
->hpd_pin
);
1187 /* if there were no outputs to poll, poll was disabled,
1188 * therefore make sure it's enabled when disabling HPD on
1189 * some connectors */
1191 drm_kms_helper_poll_enable(dev
);
1192 mod_delayed_work(system_wq
, &dev_priv
->hotplug_reenable_work
,
1193 msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY
));
1196 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
1198 list_for_each_entry(connector
, &mode_config
->connector_list
, head
) {
1199 intel_connector
= to_intel_connector(connector
);
1200 if (!intel_connector
->encoder
)
1202 intel_encoder
= intel_connector
->encoder
;
1203 if (hpd_event_bits
& (1 << intel_encoder
->hpd_pin
)) {
1204 if (intel_encoder
->hot_plug
)
1205 intel_encoder
->hot_plug(intel_encoder
);
1206 if (intel_hpd_irq_event(dev
, connector
))
1210 mutex_unlock(&mode_config
->mutex
);
1213 drm_kms_helper_hotplug_event(dev
);
1216 static void ironlake_rps_change_irq_handler(struct drm_device
*dev
)
1218 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1219 u32 busy_up
, busy_down
, max_avg
, min_avg
;
1222 spin_lock(&mchdev_lock
);
1224 I915_WRITE16(MEMINTRSTS
, I915_READ(MEMINTRSTS
));
1226 new_delay
= dev_priv
->ips
.cur_delay
;
1228 I915_WRITE16(MEMINTRSTS
, MEMINT_EVAL_CHG
);
1229 busy_up
= I915_READ(RCPREVBSYTUPAVG
);
1230 busy_down
= I915_READ(RCPREVBSYTDNAVG
);
1231 max_avg
= I915_READ(RCBMAXAVG
);
1232 min_avg
= I915_READ(RCBMINAVG
);
1234 /* Handle RCS change request from hw */
1235 if (busy_up
> max_avg
) {
1236 if (dev_priv
->ips
.cur_delay
!= dev_priv
->ips
.max_delay
)
1237 new_delay
= dev_priv
->ips
.cur_delay
- 1;
1238 if (new_delay
< dev_priv
->ips
.max_delay
)
1239 new_delay
= dev_priv
->ips
.max_delay
;
1240 } else if (busy_down
< min_avg
) {
1241 if (dev_priv
->ips
.cur_delay
!= dev_priv
->ips
.min_delay
)
1242 new_delay
= dev_priv
->ips
.cur_delay
+ 1;
1243 if (new_delay
> dev_priv
->ips
.min_delay
)
1244 new_delay
= dev_priv
->ips
.min_delay
;
1247 if (ironlake_set_drps(dev
, new_delay
))
1248 dev_priv
->ips
.cur_delay
= new_delay
;
1250 spin_unlock(&mchdev_lock
);
1255 static void notify_ring(struct drm_device
*dev
,
1256 struct intel_engine_cs
*ring
)
1258 if (!intel_ring_initialized(ring
))
1261 trace_i915_gem_request_complete(ring
);
1263 if (drm_core_check_feature(dev
, DRIVER_MODESET
))
1264 intel_notify_mmio_flip(ring
);
1266 wake_up_all(&ring
->irq_queue
);
1267 i915_queue_hangcheck(dev
);
1270 static u32
vlv_c0_residency(struct drm_i915_private
*dev_priv
,
1271 struct intel_rps_ei
*rps_ei
)
1273 u32 cz_ts
, cz_freq_khz
;
1274 u32 render_count
, media_count
;
1275 u32 elapsed_render
, elapsed_media
, elapsed_time
;
1278 cz_ts
= vlv_punit_read(dev_priv
, PUNIT_REG_CZ_TIMESTAMP
);
1279 cz_freq_khz
= DIV_ROUND_CLOSEST(dev_priv
->mem_freq
* 1000, 4);
1281 render_count
= I915_READ(VLV_RENDER_C0_COUNT_REG
);
1282 media_count
= I915_READ(VLV_MEDIA_C0_COUNT_REG
);
1284 if (rps_ei
->cz_clock
== 0) {
1285 rps_ei
->cz_clock
= cz_ts
;
1286 rps_ei
->render_c0
= render_count
;
1287 rps_ei
->media_c0
= media_count
;
1289 return dev_priv
->rps
.cur_freq
;
1292 elapsed_time
= cz_ts
- rps_ei
->cz_clock
;
1293 rps_ei
->cz_clock
= cz_ts
;
1295 elapsed_render
= render_count
- rps_ei
->render_c0
;
1296 rps_ei
->render_c0
= render_count
;
1298 elapsed_media
= media_count
- rps_ei
->media_c0
;
1299 rps_ei
->media_c0
= media_count
;
1301 /* Convert all the counters into common unit of milli sec */
1302 elapsed_time
/= VLV_CZ_CLOCK_TO_MILLI_SEC
;
1303 elapsed_render
/= cz_freq_khz
;
1304 elapsed_media
/= cz_freq_khz
;
1307 * Calculate overall C0 residency percentage
1308 * only if elapsed time is non zero
1312 ((max(elapsed_render
, elapsed_media
) * 100)
1320 * vlv_calc_delay_from_C0_counters - Increase/Decrease freq based on GPU
1321 * busy-ness calculated from C0 counters of render & media power wells
1322 * @dev_priv: DRM device private
1325 static int vlv_calc_delay_from_C0_counters(struct drm_i915_private
*dev_priv
)
1327 u32 residency_C0_up
= 0, residency_C0_down
= 0;
1330 dev_priv
->rps
.ei_interrupt_count
++;
1332 WARN_ON(!mutex_is_locked(&dev_priv
->rps
.hw_lock
));
1335 if (dev_priv
->rps
.up_ei
.cz_clock
== 0) {
1336 vlv_c0_residency(dev_priv
, &dev_priv
->rps
.up_ei
);
1337 vlv_c0_residency(dev_priv
, &dev_priv
->rps
.down_ei
);
1338 return dev_priv
->rps
.cur_freq
;
1343 * To down throttle, C0 residency should be less than down threshold
1344 * for continous EI intervals. So calculate down EI counters
1345 * once in VLV_INT_COUNT_FOR_DOWN_EI
1347 if (dev_priv
->rps
.ei_interrupt_count
== VLV_INT_COUNT_FOR_DOWN_EI
) {
1349 dev_priv
->rps
.ei_interrupt_count
= 0;
1351 residency_C0_down
= vlv_c0_residency(dev_priv
,
1352 &dev_priv
->rps
.down_ei
);
1354 residency_C0_up
= vlv_c0_residency(dev_priv
,
1355 &dev_priv
->rps
.up_ei
);
1358 new_delay
= dev_priv
->rps
.cur_freq
;
1360 adj
= dev_priv
->rps
.last_adj
;
1361 /* C0 residency is greater than UP threshold. Increase Frequency */
1362 if (residency_C0_up
>= VLV_RP_UP_EI_THRESHOLD
) {
1368 if (dev_priv
->rps
.cur_freq
< dev_priv
->rps
.max_freq_softlimit
)
1369 new_delay
= dev_priv
->rps
.cur_freq
+ adj
;
1372 * For better performance, jump directly
1373 * to RPe if we're below it.
1375 if (new_delay
< dev_priv
->rps
.efficient_freq
)
1376 new_delay
= dev_priv
->rps
.efficient_freq
;
1378 } else if (!dev_priv
->rps
.ei_interrupt_count
&&
1379 (residency_C0_down
< VLV_RP_DOWN_EI_THRESHOLD
)) {
1385 * This means, C0 residency is less than down threshold over
1386 * a period of VLV_INT_COUNT_FOR_DOWN_EI. So, reduce the freq
1388 if (dev_priv
->rps
.cur_freq
> dev_priv
->rps
.min_freq_softlimit
)
1389 new_delay
= dev_priv
->rps
.cur_freq
+ adj
;
1395 static void gen6_pm_rps_work(struct work_struct
*work
)
1397 struct drm_i915_private
*dev_priv
=
1398 container_of(work
, struct drm_i915_private
, rps
.work
);
1402 spin_lock_irq(&dev_priv
->irq_lock
);
1403 pm_iir
= dev_priv
->rps
.pm_iir
;
1404 dev_priv
->rps
.pm_iir
= 0;
1405 if (INTEL_INFO(dev_priv
->dev
)->gen
>= 8)
1406 gen8_enable_pm_irq(dev_priv
, dev_priv
->pm_rps_events
);
1408 /* Make sure not to corrupt PMIMR state used by ringbuffer */
1409 gen6_enable_pm_irq(dev_priv
, dev_priv
->pm_rps_events
);
1411 spin_unlock_irq(&dev_priv
->irq_lock
);
1413 /* Make sure we didn't queue anything we're not going to process. */
1414 WARN_ON(pm_iir
& ~dev_priv
->pm_rps_events
);
1416 if ((pm_iir
& dev_priv
->pm_rps_events
) == 0)
1419 mutex_lock(&dev_priv
->rps
.hw_lock
);
1421 adj
= dev_priv
->rps
.last_adj
;
1422 if (pm_iir
& GEN6_PM_RP_UP_THRESHOLD
) {
1426 /* CHV needs even encode values */
1427 adj
= IS_CHERRYVIEW(dev_priv
->dev
) ? 2 : 1;
1429 new_delay
= dev_priv
->rps
.cur_freq
+ adj
;
1432 * For better performance, jump directly
1433 * to RPe if we're below it.
1435 if (new_delay
< dev_priv
->rps
.efficient_freq
)
1436 new_delay
= dev_priv
->rps
.efficient_freq
;
1437 } else if (pm_iir
& GEN6_PM_RP_DOWN_TIMEOUT
) {
1438 if (dev_priv
->rps
.cur_freq
> dev_priv
->rps
.efficient_freq
)
1439 new_delay
= dev_priv
->rps
.efficient_freq
;
1441 new_delay
= dev_priv
->rps
.min_freq_softlimit
;
1443 } else if (pm_iir
& GEN6_PM_RP_UP_EI_EXPIRED
) {
1444 new_delay
= vlv_calc_delay_from_C0_counters(dev_priv
);
1445 } else if (pm_iir
& GEN6_PM_RP_DOWN_THRESHOLD
) {
1449 /* CHV needs even encode values */
1450 adj
= IS_CHERRYVIEW(dev_priv
->dev
) ? -2 : -1;
1452 new_delay
= dev_priv
->rps
.cur_freq
+ adj
;
1453 } else { /* unknown event */
1454 new_delay
= dev_priv
->rps
.cur_freq
;
1457 /* sysfs frequency interfaces may have snuck in while servicing the
1460 new_delay
= clamp_t(int, new_delay
,
1461 dev_priv
->rps
.min_freq_softlimit
,
1462 dev_priv
->rps
.max_freq_softlimit
);
1464 dev_priv
->rps
.last_adj
= new_delay
- dev_priv
->rps
.cur_freq
;
1466 if (IS_VALLEYVIEW(dev_priv
->dev
))
1467 valleyview_set_rps(dev_priv
->dev
, new_delay
);
1469 gen6_set_rps(dev_priv
->dev
, new_delay
);
1471 mutex_unlock(&dev_priv
->rps
.hw_lock
);
1476 * ivybridge_parity_work - Workqueue called when a parity error interrupt
1478 * @work: workqueue struct
1480 * Doesn't actually do anything except notify userspace. As a consequence of
1481 * this event, userspace should try to remap the bad rows since statistically
1482 * it is likely the same row is more likely to go bad again.
1484 static void ivybridge_parity_work(struct work_struct
*work
)
1486 struct drm_i915_private
*dev_priv
=
1487 container_of(work
, struct drm_i915_private
, l3_parity
.error_work
);
1488 u32 error_status
, row
, bank
, subbank
;
1489 char *parity_event
[6];
1491 unsigned long flags
;
1494 /* We must turn off DOP level clock gating to access the L3 registers.
1495 * In order to prevent a get/put style interface, acquire struct mutex
1496 * any time we access those registers.
1498 mutex_lock(&dev_priv
->dev
->struct_mutex
);
1500 /* If we've screwed up tracking, just let the interrupt fire again */
1501 if (WARN_ON(!dev_priv
->l3_parity
.which_slice
))
1504 misccpctl
= I915_READ(GEN7_MISCCPCTL
);
1505 I915_WRITE(GEN7_MISCCPCTL
, misccpctl
& ~GEN7_DOP_CLOCK_GATE_ENABLE
);
1506 POSTING_READ(GEN7_MISCCPCTL
);
1508 while ((slice
= ffs(dev_priv
->l3_parity
.which_slice
)) != 0) {
1512 if (WARN_ON_ONCE(slice
>= NUM_L3_SLICES(dev_priv
->dev
)))
1515 dev_priv
->l3_parity
.which_slice
&= ~(1<<slice
);
1517 reg
= GEN7_L3CDERRST1
+ (slice
* 0x200);
1519 error_status
= I915_READ(reg
);
1520 row
= GEN7_PARITY_ERROR_ROW(error_status
);
1521 bank
= GEN7_PARITY_ERROR_BANK(error_status
);
1522 subbank
= GEN7_PARITY_ERROR_SUBBANK(error_status
);
1524 I915_WRITE(reg
, GEN7_PARITY_ERROR_VALID
| GEN7_L3CDERRST1_ENABLE
);
1527 parity_event
[0] = I915_L3_PARITY_UEVENT
"=1";
1528 parity_event
[1] = kasprintf(GFP_KERNEL
, "ROW=%d", row
);
1529 parity_event
[2] = kasprintf(GFP_KERNEL
, "BANK=%d", bank
);
1530 parity_event
[3] = kasprintf(GFP_KERNEL
, "SUBBANK=%d", subbank
);
1531 parity_event
[4] = kasprintf(GFP_KERNEL
, "SLICE=%d", slice
);
1532 parity_event
[5] = NULL
;
1534 kobject_uevent_env(&dev_priv
->dev
->primary
->kdev
->kobj
,
1535 KOBJ_CHANGE
, parity_event
);
1537 DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
1538 slice
, row
, bank
, subbank
);
1540 kfree(parity_event
[4]);
1541 kfree(parity_event
[3]);
1542 kfree(parity_event
[2]);
1543 kfree(parity_event
[1]);
1546 I915_WRITE(GEN7_MISCCPCTL
, misccpctl
);
1549 WARN_ON(dev_priv
->l3_parity
.which_slice
);
1550 spin_lock_irqsave(&dev_priv
->irq_lock
, flags
);
1551 gen5_enable_gt_irq(dev_priv
, GT_PARITY_ERROR(dev_priv
->dev
));
1552 spin_unlock_irqrestore(&dev_priv
->irq_lock
, flags
);
1554 mutex_unlock(&dev_priv
->dev
->struct_mutex
);
1557 static void ivybridge_parity_error_irq_handler(struct drm_device
*dev
, u32 iir
)
1559 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1561 if (!HAS_L3_DPF(dev
))
1564 spin_lock(&dev_priv
->irq_lock
);
1565 gen5_disable_gt_irq(dev_priv
, GT_PARITY_ERROR(dev
));
1566 spin_unlock(&dev_priv
->irq_lock
);
1568 iir
&= GT_PARITY_ERROR(dev
);
1569 if (iir
& GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1
)
1570 dev_priv
->l3_parity
.which_slice
|= 1 << 1;
1572 if (iir
& GT_RENDER_L3_PARITY_ERROR_INTERRUPT
)
1573 dev_priv
->l3_parity
.which_slice
|= 1 << 0;
1575 queue_work(dev_priv
->wq
, &dev_priv
->l3_parity
.error_work
);
1578 static void ilk_gt_irq_handler(struct drm_device
*dev
,
1579 struct drm_i915_private
*dev_priv
,
1583 (GT_RENDER_USER_INTERRUPT
| GT_RENDER_PIPECTL_NOTIFY_INTERRUPT
))
1584 notify_ring(dev
, &dev_priv
->ring
[RCS
]);
1585 if (gt_iir
& ILK_BSD_USER_INTERRUPT
)
1586 notify_ring(dev
, &dev_priv
->ring
[VCS
]);
1589 static void snb_gt_irq_handler(struct drm_device
*dev
,
1590 struct drm_i915_private
*dev_priv
,
1595 (GT_RENDER_USER_INTERRUPT
| GT_RENDER_PIPECTL_NOTIFY_INTERRUPT
))
1596 notify_ring(dev
, &dev_priv
->ring
[RCS
]);
1597 if (gt_iir
& GT_BSD_USER_INTERRUPT
)
1598 notify_ring(dev
, &dev_priv
->ring
[VCS
]);
1599 if (gt_iir
& GT_BLT_USER_INTERRUPT
)
1600 notify_ring(dev
, &dev_priv
->ring
[BCS
]);
1602 if (gt_iir
& (GT_BLT_CS_ERROR_INTERRUPT
|
1603 GT_BSD_CS_ERROR_INTERRUPT
|
1604 GT_RENDER_CS_MASTER_ERROR_INTERRUPT
)) {
1605 i915_handle_error(dev
, false, "GT error interrupt 0x%08x",
1609 if (gt_iir
& GT_PARITY_ERROR(dev
))
1610 ivybridge_parity_error_irq_handler(dev
, gt_iir
);
1613 static void gen8_rps_irq_handler(struct drm_i915_private
*dev_priv
, u32 pm_iir
)
1615 if ((pm_iir
& dev_priv
->pm_rps_events
) == 0)
1618 spin_lock(&dev_priv
->irq_lock
);
1619 dev_priv
->rps
.pm_iir
|= pm_iir
& dev_priv
->pm_rps_events
;
1620 gen8_disable_pm_irq(dev_priv
, pm_iir
& dev_priv
->pm_rps_events
);
1621 spin_unlock(&dev_priv
->irq_lock
);
1623 queue_work(dev_priv
->wq
, &dev_priv
->rps
.work
);
1626 static irqreturn_t
gen8_gt_irq_handler(struct drm_device
*dev
,
1627 struct drm_i915_private
*dev_priv
,
1630 struct intel_engine_cs
*ring
;
1633 irqreturn_t ret
= IRQ_NONE
;
1635 if (master_ctl
& (GEN8_GT_RCS_IRQ
| GEN8_GT_BCS_IRQ
)) {
1636 tmp
= I915_READ(GEN8_GT_IIR(0));
1638 I915_WRITE(GEN8_GT_IIR(0), tmp
);
1641 rcs
= tmp
>> GEN8_RCS_IRQ_SHIFT
;
1642 ring
= &dev_priv
->ring
[RCS
];
1643 if (rcs
& GT_RENDER_USER_INTERRUPT
)
1644 notify_ring(dev
, ring
);
1645 if (rcs
& GT_CONTEXT_SWITCH_INTERRUPT
)
1646 intel_execlists_handle_ctx_events(ring
);
1648 bcs
= tmp
>> GEN8_BCS_IRQ_SHIFT
;
1649 ring
= &dev_priv
->ring
[BCS
];
1650 if (bcs
& GT_RENDER_USER_INTERRUPT
)
1651 notify_ring(dev
, ring
);
1652 if (bcs
& GT_CONTEXT_SWITCH_INTERRUPT
)
1653 intel_execlists_handle_ctx_events(ring
);
1655 DRM_ERROR("The master control interrupt lied (GT0)!\n");
1658 if (master_ctl
& (GEN8_GT_VCS1_IRQ
| GEN8_GT_VCS2_IRQ
)) {
1659 tmp
= I915_READ(GEN8_GT_IIR(1));
1661 I915_WRITE(GEN8_GT_IIR(1), tmp
);
1664 vcs
= tmp
>> GEN8_VCS1_IRQ_SHIFT
;
1665 ring
= &dev_priv
->ring
[VCS
];
1666 if (vcs
& GT_RENDER_USER_INTERRUPT
)
1667 notify_ring(dev
, ring
);
1668 if (vcs
& GT_CONTEXT_SWITCH_INTERRUPT
)
1669 intel_execlists_handle_ctx_events(ring
);
1671 vcs
= tmp
>> GEN8_VCS2_IRQ_SHIFT
;
1672 ring
= &dev_priv
->ring
[VCS2
];
1673 if (vcs
& GT_RENDER_USER_INTERRUPT
)
1674 notify_ring(dev
, ring
);
1675 if (vcs
& GT_CONTEXT_SWITCH_INTERRUPT
)
1676 intel_execlists_handle_ctx_events(ring
);
1678 DRM_ERROR("The master control interrupt lied (GT1)!\n");
1681 if (master_ctl
& GEN8_GT_PM_IRQ
) {
1682 tmp
= I915_READ(GEN8_GT_IIR(2));
1683 if (tmp
& dev_priv
->pm_rps_events
) {
1684 I915_WRITE(GEN8_GT_IIR(2),
1685 tmp
& dev_priv
->pm_rps_events
);
1687 gen8_rps_irq_handler(dev_priv
, tmp
);
1689 DRM_ERROR("The master control interrupt lied (PM)!\n");
1692 if (master_ctl
& GEN8_GT_VECS_IRQ
) {
1693 tmp
= I915_READ(GEN8_GT_IIR(3));
1695 I915_WRITE(GEN8_GT_IIR(3), tmp
);
1698 vcs
= tmp
>> GEN8_VECS_IRQ_SHIFT
;
1699 ring
= &dev_priv
->ring
[VECS
];
1700 if (vcs
& GT_RENDER_USER_INTERRUPT
)
1701 notify_ring(dev
, ring
);
1702 if (vcs
& GT_CONTEXT_SWITCH_INTERRUPT
)
1703 intel_execlists_handle_ctx_events(ring
);
1705 DRM_ERROR("The master control interrupt lied (GT3)!\n");
1711 #define HPD_STORM_DETECT_PERIOD 1000
1712 #define HPD_STORM_THRESHOLD 5
1714 static int ilk_port_to_hotplug_shift(enum port port
)
1730 static int g4x_port_to_hotplug_shift(enum port port
)
1746 static inline enum port
get_port_from_pin(enum hpd_pin pin
)
1756 return PORT_A
; /* no hpd */
1760 static inline void intel_hpd_irq_handler(struct drm_device
*dev
,
1761 u32 hotplug_trigger
,
1762 u32 dig_hotplug_reg
,
1765 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1768 bool storm_detected
= false;
1769 bool queue_dig
= false, queue_hp
= false;
1771 u32 dig_port_mask
= 0;
1773 if (!hotplug_trigger
)
1776 DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x, dig 0x%08x\n",
1777 hotplug_trigger
, dig_hotplug_reg
);
1779 spin_lock(&dev_priv
->irq_lock
);
1780 for (i
= 1; i
< HPD_NUM_PINS
; i
++) {
1781 if (!(hpd
[i
] & hotplug_trigger
))
1784 port
= get_port_from_pin(i
);
1785 if (port
&& dev_priv
->hpd_irq_port
[port
]) {
1789 dig_shift
= g4x_port_to_hotplug_shift(port
);
1790 long_hpd
= (hotplug_trigger
>> dig_shift
) & PORTB_HOTPLUG_LONG_DETECT
;
1792 dig_shift
= ilk_port_to_hotplug_shift(port
);
1793 long_hpd
= (dig_hotplug_reg
>> dig_shift
) & PORTB_HOTPLUG_LONG_DETECT
;
1796 DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
1798 long_hpd
? "long" : "short");
1799 /* for long HPD pulses we want to have the digital queue happen,
1800 but we still want HPD storm detection to function. */
1802 dev_priv
->long_hpd_port_mask
|= (1 << port
);
1803 dig_port_mask
|= hpd
[i
];
1805 /* for short HPD just trigger the digital queue */
1806 dev_priv
->short_hpd_port_mask
|= (1 << port
);
1807 hotplug_trigger
&= ~hpd
[i
];
1813 for (i
= 1; i
< HPD_NUM_PINS
; i
++) {
1814 if (hpd
[i
] & hotplug_trigger
&&
1815 dev_priv
->hpd_stats
[i
].hpd_mark
== HPD_DISABLED
) {
1817 * On GMCH platforms the interrupt mask bits only
1818 * prevent irq generation, not the setting of the
1819 * hotplug bits itself. So only WARN about unexpected
1820 * interrupts on saner platforms.
1822 WARN_ONCE(INTEL_INFO(dev
)->gen
>= 5 && !IS_VALLEYVIEW(dev
),
1823 "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n",
1824 hotplug_trigger
, i
, hpd
[i
]);
1829 if (!(hpd
[i
] & hotplug_trigger
) ||
1830 dev_priv
->hpd_stats
[i
].hpd_mark
!= HPD_ENABLED
)
1833 if (!(dig_port_mask
& hpd
[i
])) {
1834 dev_priv
->hpd_event_bits
|= (1 << i
);
1838 if (!time_in_range(jiffies
, dev_priv
->hpd_stats
[i
].hpd_last_jiffies
,
1839 dev_priv
->hpd_stats
[i
].hpd_last_jiffies
1840 + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD
))) {
1841 dev_priv
->hpd_stats
[i
].hpd_last_jiffies
= jiffies
;
1842 dev_priv
->hpd_stats
[i
].hpd_cnt
= 0;
1843 DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", i
);
1844 } else if (dev_priv
->hpd_stats
[i
].hpd_cnt
> HPD_STORM_THRESHOLD
) {
1845 dev_priv
->hpd_stats
[i
].hpd_mark
= HPD_MARK_DISABLED
;
1846 dev_priv
->hpd_event_bits
&= ~(1 << i
);
1847 DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", i
);
1848 storm_detected
= true;
1850 dev_priv
->hpd_stats
[i
].hpd_cnt
++;
1851 DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", i
,
1852 dev_priv
->hpd_stats
[i
].hpd_cnt
);
1857 dev_priv
->display
.hpd_irq_setup(dev
);
1858 spin_unlock(&dev_priv
->irq_lock
);
1861 * Our hotplug handler can grab modeset locks (by calling down into the
1862 * fb helpers). Hence it must not be run on our own dev-priv->wq work
1863 * queue for otherwise the flush_work in the pageflip code will
1867 queue_work(dev_priv
->dp_wq
, &dev_priv
->dig_port_work
);
1869 schedule_work(&dev_priv
->hotplug_work
);
1872 static void gmbus_irq_handler(struct drm_device
*dev
)
1874 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1876 wake_up_all(&dev_priv
->gmbus_wait_queue
);
1879 static void dp_aux_irq_handler(struct drm_device
*dev
)
1881 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1883 wake_up_all(&dev_priv
->gmbus_wait_queue
);
1886 #if defined(CONFIG_DEBUG_FS)
1887 static void display_pipe_crc_irq_handler(struct drm_device
*dev
, enum pipe pipe
,
1888 uint32_t crc0
, uint32_t crc1
,
1889 uint32_t crc2
, uint32_t crc3
,
1892 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1893 struct intel_pipe_crc
*pipe_crc
= &dev_priv
->pipe_crc
[pipe
];
1894 struct intel_pipe_crc_entry
*entry
;
1897 spin_lock(&pipe_crc
->lock
);
1899 if (!pipe_crc
->entries
) {
1900 spin_unlock(&pipe_crc
->lock
);
1901 DRM_ERROR("spurious interrupt\n");
1905 head
= pipe_crc
->head
;
1906 tail
= pipe_crc
->tail
;
1908 if (CIRC_SPACE(head
, tail
, INTEL_PIPE_CRC_ENTRIES_NR
) < 1) {
1909 spin_unlock(&pipe_crc
->lock
);
1910 DRM_ERROR("CRC buffer overflowing\n");
1914 entry
= &pipe_crc
->entries
[head
];
1916 entry
->frame
= dev
->driver
->get_vblank_counter(dev
, pipe
);
1917 entry
->crc
[0] = crc0
;
1918 entry
->crc
[1] = crc1
;
1919 entry
->crc
[2] = crc2
;
1920 entry
->crc
[3] = crc3
;
1921 entry
->crc
[4] = crc4
;
1923 head
= (head
+ 1) & (INTEL_PIPE_CRC_ENTRIES_NR
- 1);
1924 pipe_crc
->head
= head
;
1926 spin_unlock(&pipe_crc
->lock
);
1928 wake_up_interruptible(&pipe_crc
->wq
);
1932 display_pipe_crc_irq_handler(struct drm_device
*dev
, enum pipe pipe
,
1933 uint32_t crc0
, uint32_t crc1
,
1934 uint32_t crc2
, uint32_t crc3
,
1939 static void hsw_pipe_crc_irq_handler(struct drm_device
*dev
, enum pipe pipe
)
1941 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1943 display_pipe_crc_irq_handler(dev
, pipe
,
1944 I915_READ(PIPE_CRC_RES_1_IVB(pipe
)),
1948 static void ivb_pipe_crc_irq_handler(struct drm_device
*dev
, enum pipe pipe
)
1950 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1952 display_pipe_crc_irq_handler(dev
, pipe
,
1953 I915_READ(PIPE_CRC_RES_1_IVB(pipe
)),
1954 I915_READ(PIPE_CRC_RES_2_IVB(pipe
)),
1955 I915_READ(PIPE_CRC_RES_3_IVB(pipe
)),
1956 I915_READ(PIPE_CRC_RES_4_IVB(pipe
)),
1957 I915_READ(PIPE_CRC_RES_5_IVB(pipe
)));
1960 static void i9xx_pipe_crc_irq_handler(struct drm_device
*dev
, enum pipe pipe
)
1962 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1963 uint32_t res1
, res2
;
1965 if (INTEL_INFO(dev
)->gen
>= 3)
1966 res1
= I915_READ(PIPE_CRC_RES_RES1_I915(pipe
));
1970 if (INTEL_INFO(dev
)->gen
>= 5 || IS_G4X(dev
))
1971 res2
= I915_READ(PIPE_CRC_RES_RES2_G4X(pipe
));
1975 display_pipe_crc_irq_handler(dev
, pipe
,
1976 I915_READ(PIPE_CRC_RES_RED(pipe
)),
1977 I915_READ(PIPE_CRC_RES_GREEN(pipe
)),
1978 I915_READ(PIPE_CRC_RES_BLUE(pipe
)),
1982 void gen8_flip_interrupt(struct drm_device
*dev
)
1984 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1986 if (!dev_priv
->rps
.is_bdw_sw_turbo
)
1989 if(atomic_read(&dev_priv
->rps
.sw_turbo
.flip_received
)) {
1990 mod_timer(&dev_priv
->rps
.sw_turbo
.flip_timer
,
1991 usecs_to_jiffies(dev_priv
->rps
.sw_turbo
.timeout
) + jiffies
);
1994 dev_priv
->rps
.sw_turbo
.flip_timer
.expires
=
1995 usecs_to_jiffies(dev_priv
->rps
.sw_turbo
.timeout
) + jiffies
;
1996 add_timer(&dev_priv
->rps
.sw_turbo
.flip_timer
);
1997 atomic_set(&dev_priv
->rps
.sw_turbo
.flip_received
, true);
2000 bdw_software_turbo(dev
);
2003 /* The RPS events need forcewake, so we add them to a work queue and mask their
2004 * IMR bits until the work is done. Other interrupts can be processed without
2005 * the work queue. */
2006 static void gen6_rps_irq_handler(struct drm_i915_private
*dev_priv
, u32 pm_iir
)
2008 if (pm_iir
& dev_priv
->pm_rps_events
) {
2009 spin_lock(&dev_priv
->irq_lock
);
2010 dev_priv
->rps
.pm_iir
|= pm_iir
& dev_priv
->pm_rps_events
;
2011 gen6_disable_pm_irq(dev_priv
, pm_iir
& dev_priv
->pm_rps_events
);
2012 spin_unlock(&dev_priv
->irq_lock
);
2014 queue_work(dev_priv
->wq
, &dev_priv
->rps
.work
);
2017 if (HAS_VEBOX(dev_priv
->dev
)) {
2018 if (pm_iir
& PM_VEBOX_USER_INTERRUPT
)
2019 notify_ring(dev_priv
->dev
, &dev_priv
->ring
[VECS
]);
2021 if (pm_iir
& PM_VEBOX_CS_ERROR_INTERRUPT
) {
2022 i915_handle_error(dev_priv
->dev
, false,
2023 "VEBOX CS error interrupt 0x%08x",
2029 static bool intel_pipe_handle_vblank(struct drm_device
*dev
, enum pipe pipe
)
2031 if (!drm_handle_vblank(dev
, pipe
))
2037 static void valleyview_pipestat_irq_handler(struct drm_device
*dev
, u32 iir
)
2039 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2040 u32 pipe_stats
[I915_MAX_PIPES
] = { };
2043 spin_lock(&dev_priv
->irq_lock
);
2044 for_each_pipe(dev_priv
, pipe
) {
2046 u32 mask
, iir_bit
= 0;
2049 * PIPESTAT bits get signalled even when the interrupt is
2050 * disabled with the mask bits, and some of the status bits do
2051 * not generate interrupts at all (like the underrun bit). Hence
2052 * we need to be careful that we only handle what we want to
2056 if (__cpu_fifo_underrun_reporting_enabled(dev
, pipe
))
2057 mask
|= PIPE_FIFO_UNDERRUN_STATUS
;
2061 iir_bit
= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
;
2064 iir_bit
= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
;
2067 iir_bit
= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT
;
2071 mask
|= dev_priv
->pipestat_irq_mask
[pipe
];
2076 reg
= PIPESTAT(pipe
);
2077 mask
|= PIPESTAT_INT_ENABLE_MASK
;
2078 pipe_stats
[pipe
] = I915_READ(reg
) & mask
;
2081 * Clear the PIPE*STAT regs before the IIR
2083 if (pipe_stats
[pipe
] & (PIPE_FIFO_UNDERRUN_STATUS
|
2084 PIPESTAT_INT_STATUS_MASK
))
2085 I915_WRITE(reg
, pipe_stats
[pipe
]);
2087 spin_unlock(&dev_priv
->irq_lock
);
2089 for_each_pipe(dev_priv
, pipe
) {
2090 if (pipe_stats
[pipe
] & PIPE_START_VBLANK_INTERRUPT_STATUS
&&
2091 intel_pipe_handle_vblank(dev
, pipe
))
2092 intel_check_page_flip(dev
, pipe
);
2094 if (pipe_stats
[pipe
] & PLANE_FLIP_DONE_INT_STATUS_VLV
) {
2095 intel_prepare_page_flip(dev
, pipe
);
2096 intel_finish_page_flip(dev
, pipe
);
2099 if (pipe_stats
[pipe
] & PIPE_CRC_DONE_INTERRUPT_STATUS
)
2100 i9xx_pipe_crc_irq_handler(dev
, pipe
);
2102 if (pipe_stats
[pipe
] & PIPE_FIFO_UNDERRUN_STATUS
&&
2103 intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, false))
2104 DRM_ERROR("pipe %c underrun\n", pipe_name(pipe
));
2107 if (pipe_stats
[0] & PIPE_GMBUS_INTERRUPT_STATUS
)
2108 gmbus_irq_handler(dev
);
2111 static void i9xx_hpd_irq_handler(struct drm_device
*dev
)
2113 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2114 u32 hotplug_status
= I915_READ(PORT_HOTPLUG_STAT
);
2116 if (hotplug_status
) {
2117 I915_WRITE(PORT_HOTPLUG_STAT
, hotplug_status
);
2119 * Make sure hotplug status is cleared before we clear IIR, or else we
2120 * may miss hotplug events.
2122 POSTING_READ(PORT_HOTPLUG_STAT
);
2125 u32 hotplug_trigger
= hotplug_status
& HOTPLUG_INT_STATUS_G4X
;
2127 intel_hpd_irq_handler(dev
, hotplug_trigger
, 0, hpd_status_g4x
);
2129 u32 hotplug_trigger
= hotplug_status
& HOTPLUG_INT_STATUS_I915
;
2131 intel_hpd_irq_handler(dev
, hotplug_trigger
, 0, hpd_status_i915
);
2134 if ((IS_G4X(dev
) || IS_VALLEYVIEW(dev
)) &&
2135 hotplug_status
& DP_AUX_CHANNEL_MASK_INT_STATUS_G4X
)
2136 dp_aux_irq_handler(dev
);
2140 static irqreturn_t
valleyview_irq_handler(int irq
, void *arg
)
2142 struct drm_device
*dev
= arg
;
2143 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2144 u32 iir
, gt_iir
, pm_iir
;
2145 irqreturn_t ret
= IRQ_NONE
;
2148 /* Find, clear, then process each source of interrupt */
2150 gt_iir
= I915_READ(GTIIR
);
2152 I915_WRITE(GTIIR
, gt_iir
);
2154 pm_iir
= I915_READ(GEN6_PMIIR
);
2156 I915_WRITE(GEN6_PMIIR
, pm_iir
);
2158 iir
= I915_READ(VLV_IIR
);
2160 /* Consume port before clearing IIR or we'll miss events */
2161 if (iir
& I915_DISPLAY_PORT_INTERRUPT
)
2162 i9xx_hpd_irq_handler(dev
);
2163 I915_WRITE(VLV_IIR
, iir
);
2166 if (gt_iir
== 0 && pm_iir
== 0 && iir
== 0)
2172 snb_gt_irq_handler(dev
, dev_priv
, gt_iir
);
2174 gen6_rps_irq_handler(dev_priv
, pm_iir
);
2175 /* Call regardless, as some status bits might not be
2176 * signalled in iir */
2177 valleyview_pipestat_irq_handler(dev
, iir
);
2184 static irqreturn_t
cherryview_irq_handler(int irq
, void *arg
)
2186 struct drm_device
*dev
= arg
;
2187 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2188 u32 master_ctl
, iir
;
2189 irqreturn_t ret
= IRQ_NONE
;
2192 master_ctl
= I915_READ(GEN8_MASTER_IRQ
) & ~GEN8_MASTER_IRQ_CONTROL
;
2193 iir
= I915_READ(VLV_IIR
);
2195 if (master_ctl
== 0 && iir
== 0)
2200 I915_WRITE(GEN8_MASTER_IRQ
, 0);
2202 /* Find, clear, then process each source of interrupt */
2205 /* Consume port before clearing IIR or we'll miss events */
2206 if (iir
& I915_DISPLAY_PORT_INTERRUPT
)
2207 i9xx_hpd_irq_handler(dev
);
2208 I915_WRITE(VLV_IIR
, iir
);
2211 gen8_gt_irq_handler(dev
, dev_priv
, master_ctl
);
2213 /* Call regardless, as some status bits might not be
2214 * signalled in iir */
2215 valleyview_pipestat_irq_handler(dev
, iir
);
2217 I915_WRITE(GEN8_MASTER_IRQ
, DE_MASTER_IRQ_CONTROL
);
2218 POSTING_READ(GEN8_MASTER_IRQ
);
2224 static void ibx_irq_handler(struct drm_device
*dev
, u32 pch_iir
)
2226 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2228 u32 hotplug_trigger
= pch_iir
& SDE_HOTPLUG_MASK
;
2229 u32 dig_hotplug_reg
;
2231 dig_hotplug_reg
= I915_READ(PCH_PORT_HOTPLUG
);
2232 I915_WRITE(PCH_PORT_HOTPLUG
, dig_hotplug_reg
);
2234 intel_hpd_irq_handler(dev
, hotplug_trigger
, dig_hotplug_reg
, hpd_ibx
);
2236 if (pch_iir
& SDE_AUDIO_POWER_MASK
) {
2237 int port
= ffs((pch_iir
& SDE_AUDIO_POWER_MASK
) >>
2238 SDE_AUDIO_POWER_SHIFT
);
2239 DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
2243 if (pch_iir
& SDE_AUX_MASK
)
2244 dp_aux_irq_handler(dev
);
2246 if (pch_iir
& SDE_GMBUS
)
2247 gmbus_irq_handler(dev
);
2249 if (pch_iir
& SDE_AUDIO_HDCP_MASK
)
2250 DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
2252 if (pch_iir
& SDE_AUDIO_TRANS_MASK
)
2253 DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
2255 if (pch_iir
& SDE_POISON
)
2256 DRM_ERROR("PCH poison interrupt\n");
2258 if (pch_iir
& SDE_FDI_MASK
)
2259 for_each_pipe(dev_priv
, pipe
)
2260 DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
2262 I915_READ(FDI_RX_IIR(pipe
)));
2264 if (pch_iir
& (SDE_TRANSB_CRC_DONE
| SDE_TRANSA_CRC_DONE
))
2265 DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
2267 if (pch_iir
& (SDE_TRANSB_CRC_ERR
| SDE_TRANSA_CRC_ERR
))
2268 DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
2270 if (pch_iir
& SDE_TRANSA_FIFO_UNDER
)
2271 if (intel_set_pch_fifo_underrun_reporting(dev
, TRANSCODER_A
,
2273 DRM_ERROR("PCH transcoder A FIFO underrun\n");
2275 if (pch_iir
& SDE_TRANSB_FIFO_UNDER
)
2276 if (intel_set_pch_fifo_underrun_reporting(dev
, TRANSCODER_B
,
2278 DRM_ERROR("PCH transcoder B FIFO underrun\n");
2281 static void ivb_err_int_handler(struct drm_device
*dev
)
2283 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2284 u32 err_int
= I915_READ(GEN7_ERR_INT
);
2287 if (err_int
& ERR_INT_POISON
)
2288 DRM_ERROR("Poison interrupt\n");
2290 for_each_pipe(dev_priv
, pipe
) {
2291 if (err_int
& ERR_INT_FIFO_UNDERRUN(pipe
)) {
2292 if (intel_set_cpu_fifo_underrun_reporting(dev
, pipe
,
2294 DRM_ERROR("Pipe %c FIFO underrun\n",
2298 if (err_int
& ERR_INT_PIPE_CRC_DONE(pipe
)) {
2299 if (IS_IVYBRIDGE(dev
))
2300 ivb_pipe_crc_irq_handler(dev
, pipe
);
2302 hsw_pipe_crc_irq_handler(dev
, pipe
);
2306 I915_WRITE(GEN7_ERR_INT
, err_int
);
2309 static void cpt_serr_int_handler(struct drm_device
*dev
)
2311 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2312 u32 serr_int
= I915_READ(SERR_INT
);
2314 if (serr_int
& SERR_INT_POISON
)
2315 DRM_ERROR("PCH poison interrupt\n");
2317 if (serr_int
& SERR_INT_TRANS_A_FIFO_UNDERRUN
)
2318 if (intel_set_pch_fifo_underrun_reporting(dev
, TRANSCODER_A
,
2320 DRM_ERROR("PCH transcoder A FIFO underrun\n");
2322 if (serr_int
& SERR_INT_TRANS_B_FIFO_UNDERRUN
)
2323 if (intel_set_pch_fifo_underrun_reporting(dev
, TRANSCODER_B
,
2325 DRM_ERROR("PCH transcoder B FIFO underrun\n");
2327 if (serr_int
& SERR_INT_TRANS_C_FIFO_UNDERRUN
)
2328 if (intel_set_pch_fifo_underrun_reporting(dev
, TRANSCODER_C
,
2330 DRM_ERROR("PCH transcoder C FIFO underrun\n");
2332 I915_WRITE(SERR_INT
, serr_int
);
2335 static void cpt_irq_handler(struct drm_device
*dev
, u32 pch_iir
)
2337 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2339 u32 hotplug_trigger
= pch_iir
& SDE_HOTPLUG_MASK_CPT
;
2340 u32 dig_hotplug_reg
;
2342 dig_hotplug_reg
= I915_READ(PCH_PORT_HOTPLUG
);
2343 I915_WRITE(PCH_PORT_HOTPLUG
, dig_hotplug_reg
);
2345 intel_hpd_irq_handler(dev
, hotplug_trigger
, dig_hotplug_reg
, hpd_cpt
);
2347 if (pch_iir
& SDE_AUDIO_POWER_MASK_CPT
) {
2348 int port
= ffs((pch_iir
& SDE_AUDIO_POWER_MASK_CPT
) >>
2349 SDE_AUDIO_POWER_SHIFT_CPT
);
2350 DRM_DEBUG_DRIVER("PCH audio power change on port %c\n",
2354 if (pch_iir
& SDE_AUX_MASK_CPT
)
2355 dp_aux_irq_handler(dev
);
2357 if (pch_iir
& SDE_GMBUS_CPT
)
2358 gmbus_irq_handler(dev
);
2360 if (pch_iir
& SDE_AUDIO_CP_REQ_CPT
)
2361 DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
2363 if (pch_iir
& SDE_AUDIO_CP_CHG_CPT
)
2364 DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
2366 if (pch_iir
& SDE_FDI_MASK_CPT
)
2367 for_each_pipe(dev_priv
, pipe
)
2368 DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
2370 I915_READ(FDI_RX_IIR(pipe
)));
2372 if (pch_iir
& SDE_ERROR_CPT
)
2373 cpt_serr_int_handler(dev
);
2376 static void ilk_display_irq_handler(struct drm_device
*dev
, u32 de_iir
)
2378 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2381 if (de_iir
& DE_AUX_CHANNEL_A
)
2382 dp_aux_irq_handler(dev
);
2384 if (de_iir
& DE_GSE
)
2385 intel_opregion_asle_intr(dev
);
2387 if (de_iir
& DE_POISON
)
2388 DRM_ERROR("Poison interrupt\n");
2390 for_each_pipe(dev_priv
, pipe
) {
2391 if (de_iir
& DE_PIPE_VBLANK(pipe
) &&
2392 intel_pipe_handle_vblank(dev
, pipe
))
2393 intel_check_page_flip(dev
, pipe
);
2395 if (de_iir
& DE_PIPE_FIFO_UNDERRUN(pipe
))
2396 if (intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, false))
2397 DRM_ERROR("Pipe %c FIFO underrun\n",
2400 if (de_iir
& DE_PIPE_CRC_DONE(pipe
))
2401 i9xx_pipe_crc_irq_handler(dev
, pipe
);
2403 /* plane/pipes map 1:1 on ilk+ */
2404 if (de_iir
& DE_PLANE_FLIP_DONE(pipe
)) {
2405 intel_prepare_page_flip(dev
, pipe
);
2406 intel_finish_page_flip_plane(dev
, pipe
);
2410 /* check event from PCH */
2411 if (de_iir
& DE_PCH_EVENT
) {
2412 u32 pch_iir
= I915_READ(SDEIIR
);
2414 if (HAS_PCH_CPT(dev
))
2415 cpt_irq_handler(dev
, pch_iir
);
2417 ibx_irq_handler(dev
, pch_iir
);
2419 /* should clear PCH hotplug event before clear CPU irq */
2420 I915_WRITE(SDEIIR
, pch_iir
);
2423 if (IS_GEN5(dev
) && de_iir
& DE_PCU_EVENT
)
2424 ironlake_rps_change_irq_handler(dev
);
2427 static void ivb_display_irq_handler(struct drm_device
*dev
, u32 de_iir
)
2429 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2432 if (de_iir
& DE_ERR_INT_IVB
)
2433 ivb_err_int_handler(dev
);
2435 if (de_iir
& DE_AUX_CHANNEL_A_IVB
)
2436 dp_aux_irq_handler(dev
);
2438 if (de_iir
& DE_GSE_IVB
)
2439 intel_opregion_asle_intr(dev
);
2441 for_each_pipe(dev_priv
, pipe
) {
2442 if (de_iir
& (DE_PIPE_VBLANK_IVB(pipe
)) &&
2443 intel_pipe_handle_vblank(dev
, pipe
))
2444 intel_check_page_flip(dev
, pipe
);
2446 /* plane/pipes map 1:1 on ilk+ */
2447 if (de_iir
& DE_PLANE_FLIP_DONE_IVB(pipe
)) {
2448 intel_prepare_page_flip(dev
, pipe
);
2449 intel_finish_page_flip_plane(dev
, pipe
);
2453 /* check event from PCH */
2454 if (!HAS_PCH_NOP(dev
) && (de_iir
& DE_PCH_EVENT_IVB
)) {
2455 u32 pch_iir
= I915_READ(SDEIIR
);
2457 cpt_irq_handler(dev
, pch_iir
);
2459 /* clear PCH hotplug event before clear CPU irq */
2460 I915_WRITE(SDEIIR
, pch_iir
);
2465 * To handle irqs with the minimum potential races with fresh interrupts, we:
2466 * 1 - Disable Master Interrupt Control.
2467 * 2 - Find the source(s) of the interrupt.
2468 * 3 - Clear the Interrupt Identity bits (IIR).
2469 * 4 - Process the interrupt(s) that had bits set in the IIRs.
2470 * 5 - Re-enable Master Interrupt Control.
2472 static irqreturn_t
ironlake_irq_handler(int irq
, void *arg
)
2474 struct drm_device
*dev
= arg
;
2475 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2476 u32 de_iir
, gt_iir
, de_ier
, sde_ier
= 0;
2477 irqreturn_t ret
= IRQ_NONE
;
2479 /* We get interrupts on unclaimed registers, so check for this before we
2480 * do any I915_{READ,WRITE}. */
2481 intel_uncore_check_errors(dev
);
2483 /* disable master interrupt before clearing iir */
2484 de_ier
= I915_READ(DEIER
);
2485 I915_WRITE(DEIER
, de_ier
& ~DE_MASTER_IRQ_CONTROL
);
2486 POSTING_READ(DEIER
);
2488 /* Disable south interrupts. We'll only write to SDEIIR once, so further
2489 * interrupts will will be stored on its back queue, and then we'll be
2490 * able to process them after we restore SDEIER (as soon as we restore
2491 * it, we'll get an interrupt if SDEIIR still has something to process
2492 * due to its back queue). */
2493 if (!HAS_PCH_NOP(dev
)) {
2494 sde_ier
= I915_READ(SDEIER
);
2495 I915_WRITE(SDEIER
, 0);
2496 POSTING_READ(SDEIER
);
2499 /* Find, clear, then process each source of interrupt */
2501 gt_iir
= I915_READ(GTIIR
);
2503 I915_WRITE(GTIIR
, gt_iir
);
2505 if (INTEL_INFO(dev
)->gen
>= 6)
2506 snb_gt_irq_handler(dev
, dev_priv
, gt_iir
);
2508 ilk_gt_irq_handler(dev
, dev_priv
, gt_iir
);
2511 de_iir
= I915_READ(DEIIR
);
2513 I915_WRITE(DEIIR
, de_iir
);
2515 if (INTEL_INFO(dev
)->gen
>= 7)
2516 ivb_display_irq_handler(dev
, de_iir
);
2518 ilk_display_irq_handler(dev
, de_iir
);
2521 if (INTEL_INFO(dev
)->gen
>= 6) {
2522 u32 pm_iir
= I915_READ(GEN6_PMIIR
);
2524 I915_WRITE(GEN6_PMIIR
, pm_iir
);
2526 gen6_rps_irq_handler(dev_priv
, pm_iir
);
2530 I915_WRITE(DEIER
, de_ier
);
2531 POSTING_READ(DEIER
);
2532 if (!HAS_PCH_NOP(dev
)) {
2533 I915_WRITE(SDEIER
, sde_ier
);
2534 POSTING_READ(SDEIER
);
2540 static irqreturn_t
gen8_irq_handler(int irq
, void *arg
)
2542 struct drm_device
*dev
= arg
;
2543 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2545 irqreturn_t ret
= IRQ_NONE
;
2549 master_ctl
= I915_READ(GEN8_MASTER_IRQ
);
2550 master_ctl
&= ~GEN8_MASTER_IRQ_CONTROL
;
2554 I915_WRITE(GEN8_MASTER_IRQ
, 0);
2555 POSTING_READ(GEN8_MASTER_IRQ
);
2557 /* Find, clear, then process each source of interrupt */
2559 ret
= gen8_gt_irq_handler(dev
, dev_priv
, master_ctl
);
2561 if (master_ctl
& GEN8_DE_MISC_IRQ
) {
2562 tmp
= I915_READ(GEN8_DE_MISC_IIR
);
2564 I915_WRITE(GEN8_DE_MISC_IIR
, tmp
);
2566 if (tmp
& GEN8_DE_MISC_GSE
)
2567 intel_opregion_asle_intr(dev
);
2569 DRM_ERROR("Unexpected DE Misc interrupt\n");
2572 DRM_ERROR("The master control interrupt lied (DE MISC)!\n");
2575 if (master_ctl
& GEN8_DE_PORT_IRQ
) {
2576 tmp
= I915_READ(GEN8_DE_PORT_IIR
);
2578 I915_WRITE(GEN8_DE_PORT_IIR
, tmp
);
2580 if (tmp
& GEN8_AUX_CHANNEL_A
)
2581 dp_aux_irq_handler(dev
);
2583 DRM_ERROR("Unexpected DE Port interrupt\n");
2586 DRM_ERROR("The master control interrupt lied (DE PORT)!\n");
2589 for_each_pipe(dev_priv
, pipe
) {
2590 uint32_t pipe_iir
, flip_done
= 0, fault_errors
= 0;
2592 if (!(master_ctl
& GEN8_DE_PIPE_IRQ(pipe
)))
2595 pipe_iir
= I915_READ(GEN8_DE_PIPE_IIR(pipe
));
2598 I915_WRITE(GEN8_DE_PIPE_IIR(pipe
), pipe_iir
);
2600 if (pipe_iir
& GEN8_PIPE_VBLANK
&&
2601 intel_pipe_handle_vblank(dev
, pipe
))
2602 intel_check_page_flip(dev
, pipe
);
2605 flip_done
= pipe_iir
& GEN9_PIPE_PLANE1_FLIP_DONE
;
2607 flip_done
= pipe_iir
& GEN8_PIPE_PRIMARY_FLIP_DONE
;
2610 intel_prepare_page_flip(dev
, pipe
);
2611 intel_finish_page_flip_plane(dev
, pipe
);
2614 if (pipe_iir
& GEN8_PIPE_CDCLK_CRC_DONE
)
2615 hsw_pipe_crc_irq_handler(dev
, pipe
);
2617 if (pipe_iir
& GEN8_PIPE_FIFO_UNDERRUN
) {
2618 if (intel_set_cpu_fifo_underrun_reporting(dev
, pipe
,
2620 DRM_ERROR("Pipe %c FIFO underrun\n",
2626 fault_errors
= pipe_iir
& GEN9_DE_PIPE_IRQ_FAULT_ERRORS
;
2628 fault_errors
= pipe_iir
& GEN8_DE_PIPE_IRQ_FAULT_ERRORS
;
2631 DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
2633 pipe_iir
& GEN8_DE_PIPE_IRQ_FAULT_ERRORS
);
2635 DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
2638 if (!HAS_PCH_NOP(dev
) && master_ctl
& GEN8_DE_PCH_IRQ
) {
2640 * FIXME(BDW): Assume for now that the new interrupt handling
2641 * scheme also closed the SDE interrupt handling race we've seen
2642 * on older pch-split platforms. But this needs testing.
2644 u32 pch_iir
= I915_READ(SDEIIR
);
2646 I915_WRITE(SDEIIR
, pch_iir
);
2648 cpt_irq_handler(dev
, pch_iir
);
2650 DRM_ERROR("The master control interrupt lied (SDE)!\n");
2654 I915_WRITE(GEN8_MASTER_IRQ
, GEN8_MASTER_IRQ_CONTROL
);
2655 POSTING_READ(GEN8_MASTER_IRQ
);
2660 static void i915_error_wake_up(struct drm_i915_private
*dev_priv
,
2661 bool reset_completed
)
2663 struct intel_engine_cs
*ring
;
2667 * Notify all waiters for GPU completion events that reset state has
2668 * been changed, and that they need to restart their wait after
2669 * checking for potential errors (and bail out to drop locks if there is
2670 * a gpu reset pending so that i915_error_work_func can acquire them).
2673 /* Wake up __wait_seqno, potentially holding dev->struct_mutex. */
2674 for_each_ring(ring
, dev_priv
, i
)
2675 wake_up_all(&ring
->irq_queue
);
2677 /* Wake up intel_crtc_wait_for_pending_flips, holding crtc->mutex. */
2678 wake_up_all(&dev_priv
->pending_flip_queue
);
2681 * Signal tasks blocked in i915_gem_wait_for_error that the pending
2682 * reset state is cleared.
2684 if (reset_completed
)
2685 wake_up_all(&dev_priv
->gpu_error
.reset_queue
);
2689 * i915_error_work_func - do process context error handling work
2690 * @work: work struct
2692 * Fire an error uevent so userspace can see that a hang or error
2695 static void i915_error_work_func(struct work_struct
*work
)
2697 struct i915_gpu_error
*error
= container_of(work
, struct i915_gpu_error
,
2699 struct drm_i915_private
*dev_priv
=
2700 container_of(error
, struct drm_i915_private
, gpu_error
);
2701 struct drm_device
*dev
= dev_priv
->dev
;
2702 char *error_event
[] = { I915_ERROR_UEVENT
"=1", NULL
};
2703 char *reset_event
[] = { I915_RESET_UEVENT
"=1", NULL
};
2704 char *reset_done_event
[] = { I915_ERROR_UEVENT
"=0", NULL
};
2707 kobject_uevent_env(&dev
->primary
->kdev
->kobj
, KOBJ_CHANGE
, error_event
);
2710 * Note that there's only one work item which does gpu resets, so we
2711 * need not worry about concurrent gpu resets potentially incrementing
2712 * error->reset_counter twice. We only need to take care of another
2713 * racing irq/hangcheck declaring the gpu dead for a second time. A
2714 * quick check for that is good enough: schedule_work ensures the
2715 * correct ordering between hang detection and this work item, and since
2716 * the reset in-progress bit is only ever set by code outside of this
2717 * work we don't need to worry about any other races.
2719 if (i915_reset_in_progress(error
) && !i915_terminally_wedged(error
)) {
2720 DRM_DEBUG_DRIVER("resetting chip\n");
2721 kobject_uevent_env(&dev
->primary
->kdev
->kobj
, KOBJ_CHANGE
,
2725 * In most cases it's guaranteed that we get here with an RPM
2726 * reference held, for example because there is a pending GPU
2727 * request that won't finish until the reset is done. This
2728 * isn't the case at least when we get here by doing a
2729 * simulated reset via debugs, so get an RPM reference.
2731 intel_runtime_pm_get(dev_priv
);
2733 * All state reset _must_ be completed before we update the
2734 * reset counter, for otherwise waiters might miss the reset
2735 * pending state and not properly drop locks, resulting in
2736 * deadlocks with the reset work.
2738 ret
= i915_reset(dev
);
2740 intel_display_handle_reset(dev
);
2742 intel_runtime_pm_put(dev_priv
);
2746 * After all the gem state is reset, increment the reset
2747 * counter and wake up everyone waiting for the reset to
2750 * Since unlock operations are a one-sided barrier only,
2751 * we need to insert a barrier here to order any seqno
2753 * the counter increment.
2755 smp_mb__before_atomic();
2756 atomic_inc(&dev_priv
->gpu_error
.reset_counter
);
2758 kobject_uevent_env(&dev
->primary
->kdev
->kobj
,
2759 KOBJ_CHANGE
, reset_done_event
);
2761 atomic_set_mask(I915_WEDGED
, &error
->reset_counter
);
2765 * Note: The wake_up also serves as a memory barrier so that
2766 * waiters see the update value of the reset counter atomic_t.
2768 i915_error_wake_up(dev_priv
, true);
2772 static void i915_report_and_clear_eir(struct drm_device
*dev
)
2774 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2775 uint32_t instdone
[I915_NUM_INSTDONE_REG
];
2776 u32 eir
= I915_READ(EIR
);
2782 pr_err("render error detected, EIR: 0x%08x\n", eir
);
2784 i915_get_extra_instdone(dev
, instdone
);
2787 if (eir
& (GM45_ERROR_MEM_PRIV
| GM45_ERROR_CP_PRIV
)) {
2788 u32 ipeir
= I915_READ(IPEIR_I965
);
2790 pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965
));
2791 pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965
));
2792 for (i
= 0; i
< ARRAY_SIZE(instdone
); i
++)
2793 pr_err(" INSTDONE_%d: 0x%08x\n", i
, instdone
[i
]);
2794 pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS
));
2795 pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965
));
2796 I915_WRITE(IPEIR_I965
, ipeir
);
2797 POSTING_READ(IPEIR_I965
);
2799 if (eir
& GM45_ERROR_PAGE_TABLE
) {
2800 u32 pgtbl_err
= I915_READ(PGTBL_ER
);
2801 pr_err("page table error\n");
2802 pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err
);
2803 I915_WRITE(PGTBL_ER
, pgtbl_err
);
2804 POSTING_READ(PGTBL_ER
);
2808 if (!IS_GEN2(dev
)) {
2809 if (eir
& I915_ERROR_PAGE_TABLE
) {
2810 u32 pgtbl_err
= I915_READ(PGTBL_ER
);
2811 pr_err("page table error\n");
2812 pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err
);
2813 I915_WRITE(PGTBL_ER
, pgtbl_err
);
2814 POSTING_READ(PGTBL_ER
);
2818 if (eir
& I915_ERROR_MEMORY_REFRESH
) {
2819 pr_err("memory refresh error:\n");
2820 for_each_pipe(dev_priv
, pipe
)
2821 pr_err("pipe %c stat: 0x%08x\n",
2822 pipe_name(pipe
), I915_READ(PIPESTAT(pipe
)));
2823 /* pipestat has already been acked */
2825 if (eir
& I915_ERROR_INSTRUCTION
) {
2826 pr_err("instruction error\n");
2827 pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM
));
2828 for (i
= 0; i
< ARRAY_SIZE(instdone
); i
++)
2829 pr_err(" INSTDONE_%d: 0x%08x\n", i
, instdone
[i
]);
2830 if (INTEL_INFO(dev
)->gen
< 4) {
2831 u32 ipeir
= I915_READ(IPEIR
);
2833 pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR
));
2834 pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR
));
2835 pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD
));
2836 I915_WRITE(IPEIR
, ipeir
);
2837 POSTING_READ(IPEIR
);
2839 u32 ipeir
= I915_READ(IPEIR_I965
);
2841 pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965
));
2842 pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965
));
2843 pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS
));
2844 pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965
));
2845 I915_WRITE(IPEIR_I965
, ipeir
);
2846 POSTING_READ(IPEIR_I965
);
2850 I915_WRITE(EIR
, eir
);
2852 eir
= I915_READ(EIR
);
2855 * some errors might have become stuck,
2858 DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir
);
2859 I915_WRITE(EMR
, I915_READ(EMR
) | eir
);
2860 I915_WRITE(IIR
, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
);
2865 * i915_handle_error - handle an error interrupt
2868 * Do some basic checking of regsiter state at error interrupt time and
2869 * dump it to the syslog. Also call i915_capture_error_state() to make
2870 * sure we get a record and make it available in debugfs. Fire a uevent
2871 * so userspace knows something bad happened (should trigger collection
2872 * of a ring dump etc.).
2874 void i915_handle_error(struct drm_device
*dev
, bool wedged
,
2875 const char *fmt
, ...)
2877 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2881 va_start(args
, fmt
);
2882 vscnprintf(error_msg
, sizeof(error_msg
), fmt
, args
);
2885 i915_capture_error_state(dev
, wedged
, error_msg
);
2886 i915_report_and_clear_eir(dev
);
2889 atomic_set_mask(I915_RESET_IN_PROGRESS_FLAG
,
2890 &dev_priv
->gpu_error
.reset_counter
);
2893 * Wakeup waiting processes so that the reset work function
2894 * i915_error_work_func doesn't deadlock trying to grab various
2895 * locks. By bumping the reset counter first, the woken
2896 * processes will see a reset in progress and back off,
2897 * releasing their locks and then wait for the reset completion.
2898 * We must do this for _all_ gpu waiters that might hold locks
2899 * that the reset work needs to acquire.
2901 * Note: The wake_up serves as the required memory barrier to
2902 * ensure that the waiters see the updated value of the reset
2905 i915_error_wake_up(dev_priv
, false);
2909 * Our reset work can grab modeset locks (since it needs to reset the
2910 * state of outstanding pagelips). Hence it must not be run on our own
2911 * dev-priv->wq work queue for otherwise the flush_work in the pageflip
2912 * code will deadlock.
2914 schedule_work(&dev_priv
->gpu_error
.work
);
2917 /* Called from drm generic code, passed 'crtc' which
2918 * we use as a pipe index
2920 static int i915_enable_vblank(struct drm_device
*dev
, int pipe
)
2922 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2923 unsigned long irqflags
;
2925 if (!i915_pipe_enabled(dev
, pipe
))
2928 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
2929 if (INTEL_INFO(dev
)->gen
>= 4)
2930 i915_enable_pipestat(dev_priv
, pipe
,
2931 PIPE_START_VBLANK_INTERRUPT_STATUS
);
2933 i915_enable_pipestat(dev_priv
, pipe
,
2934 PIPE_VBLANK_INTERRUPT_STATUS
);
2935 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
2940 static int ironlake_enable_vblank(struct drm_device
*dev
, int pipe
)
2942 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2943 unsigned long irqflags
;
2944 uint32_t bit
= (INTEL_INFO(dev
)->gen
>= 7) ? DE_PIPE_VBLANK_IVB(pipe
) :
2945 DE_PIPE_VBLANK(pipe
);
2947 if (!i915_pipe_enabled(dev
, pipe
))
2950 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
2951 ironlake_enable_display_irq(dev_priv
, bit
);
2952 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
2957 static int valleyview_enable_vblank(struct drm_device
*dev
, int pipe
)
2959 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2960 unsigned long irqflags
;
2962 if (!i915_pipe_enabled(dev
, pipe
))
2965 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
2966 i915_enable_pipestat(dev_priv
, pipe
,
2967 PIPE_START_VBLANK_INTERRUPT_STATUS
);
2968 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
2973 static int gen8_enable_vblank(struct drm_device
*dev
, int pipe
)
2975 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2976 unsigned long irqflags
;
2978 if (!i915_pipe_enabled(dev
, pipe
))
2981 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
2982 dev_priv
->de_irq_mask
[pipe
] &= ~GEN8_PIPE_VBLANK
;
2983 I915_WRITE(GEN8_DE_PIPE_IMR(pipe
), dev_priv
->de_irq_mask
[pipe
]);
2984 POSTING_READ(GEN8_DE_PIPE_IMR(pipe
));
2985 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
2989 /* Called from drm generic code, passed 'crtc' which
2990 * we use as a pipe index
2992 static void i915_disable_vblank(struct drm_device
*dev
, int pipe
)
2994 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2995 unsigned long irqflags
;
2997 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
2998 i915_disable_pipestat(dev_priv
, pipe
,
2999 PIPE_VBLANK_INTERRUPT_STATUS
|
3000 PIPE_START_VBLANK_INTERRUPT_STATUS
);
3001 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3004 static void ironlake_disable_vblank(struct drm_device
*dev
, int pipe
)
3006 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3007 unsigned long irqflags
;
3008 uint32_t bit
= (INTEL_INFO(dev
)->gen
>= 7) ? DE_PIPE_VBLANK_IVB(pipe
) :
3009 DE_PIPE_VBLANK(pipe
);
3011 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3012 ironlake_disable_display_irq(dev_priv
, bit
);
3013 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3016 static void valleyview_disable_vblank(struct drm_device
*dev
, int pipe
)
3018 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3019 unsigned long irqflags
;
3021 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3022 i915_disable_pipestat(dev_priv
, pipe
,
3023 PIPE_START_VBLANK_INTERRUPT_STATUS
);
3024 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3027 static void gen8_disable_vblank(struct drm_device
*dev
, int pipe
)
3029 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3030 unsigned long irqflags
;
3032 if (!i915_pipe_enabled(dev
, pipe
))
3035 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3036 dev_priv
->de_irq_mask
[pipe
] |= GEN8_PIPE_VBLANK
;
3037 I915_WRITE(GEN8_DE_PIPE_IMR(pipe
), dev_priv
->de_irq_mask
[pipe
]);
3038 POSTING_READ(GEN8_DE_PIPE_IMR(pipe
));
3039 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3043 ring_last_seqno(struct intel_engine_cs
*ring
)
3045 return list_entry(ring
->request_list
.prev
,
3046 struct drm_i915_gem_request
, list
)->seqno
;
3050 ring_idle(struct intel_engine_cs
*ring
, u32 seqno
)
3052 return (list_empty(&ring
->request_list
) ||
3053 i915_seqno_passed(seqno
, ring_last_seqno(ring
)));
3057 ipehr_is_semaphore_wait(struct drm_device
*dev
, u32 ipehr
)
3059 if (INTEL_INFO(dev
)->gen
>= 8) {
3060 return (ipehr
>> 23) == 0x1c;
3062 ipehr
&= ~MI_SEMAPHORE_SYNC_MASK
;
3063 return ipehr
== (MI_SEMAPHORE_MBOX
| MI_SEMAPHORE_COMPARE
|
3064 MI_SEMAPHORE_REGISTER
);
3068 static struct intel_engine_cs
*
3069 semaphore_wait_to_signaller_ring(struct intel_engine_cs
*ring
, u32 ipehr
, u64 offset
)
3071 struct drm_i915_private
*dev_priv
= ring
->dev
->dev_private
;
3072 struct intel_engine_cs
*signaller
;
3075 if (INTEL_INFO(dev_priv
->dev
)->gen
>= 8) {
3076 for_each_ring(signaller
, dev_priv
, i
) {
3077 if (ring
== signaller
)
3080 if (offset
== signaller
->semaphore
.signal_ggtt
[ring
->id
])
3084 u32 sync_bits
= ipehr
& MI_SEMAPHORE_SYNC_MASK
;
3086 for_each_ring(signaller
, dev_priv
, i
) {
3087 if(ring
== signaller
)
3090 if (sync_bits
== signaller
->semaphore
.mbox
.wait
[ring
->id
])
3095 DRM_ERROR("No signaller ring found for ring %i, ipehr 0x%08x, offset 0x%016llx\n",
3096 ring
->id
, ipehr
, offset
);
3101 static struct intel_engine_cs
*
3102 semaphore_waits_for(struct intel_engine_cs
*ring
, u32
*seqno
)
3104 struct drm_i915_private
*dev_priv
= ring
->dev
->dev_private
;
3105 u32 cmd
, ipehr
, head
;
3109 ipehr
= I915_READ(RING_IPEHR(ring
->mmio_base
));
3110 if (!ipehr_is_semaphore_wait(ring
->dev
, ipehr
))
3114 * HEAD is likely pointing to the dword after the actual command,
3115 * so scan backwards until we find the MBOX. But limit it to just 3
3116 * or 4 dwords depending on the semaphore wait command size.
3117 * Note that we don't care about ACTHD here since that might
3118 * point at at batch, and semaphores are always emitted into the
3119 * ringbuffer itself.
3121 head
= I915_READ_HEAD(ring
) & HEAD_ADDR
;
3122 backwards
= (INTEL_INFO(ring
->dev
)->gen
>= 8) ? 5 : 4;
3124 for (i
= backwards
; i
; --i
) {
3126 * Be paranoid and presume the hw has gone off into the wild -
3127 * our ring is smaller than what the hardware (and hence
3128 * HEAD_ADDR) allows. Also handles wrap-around.
3130 head
&= ring
->buffer
->size
- 1;
3132 /* This here seems to blow up */
3133 cmd
= ioread32(ring
->buffer
->virtual_start
+ head
);
3143 *seqno
= ioread32(ring
->buffer
->virtual_start
+ head
+ 4) + 1;
3144 if (INTEL_INFO(ring
->dev
)->gen
>= 8) {
3145 offset
= ioread32(ring
->buffer
->virtual_start
+ head
+ 12);
3147 offset
= ioread32(ring
->buffer
->virtual_start
+ head
+ 8);
3149 return semaphore_wait_to_signaller_ring(ring
, ipehr
, offset
);
3152 static int semaphore_passed(struct intel_engine_cs
*ring
)
3154 struct drm_i915_private
*dev_priv
= ring
->dev
->dev_private
;
3155 struct intel_engine_cs
*signaller
;
3158 ring
->hangcheck
.deadlock
++;
3160 signaller
= semaphore_waits_for(ring
, &seqno
);
3161 if (signaller
== NULL
)
3164 /* Prevent pathological recursion due to driver bugs */
3165 if (signaller
->hangcheck
.deadlock
>= I915_NUM_RINGS
)
3168 if (i915_seqno_passed(signaller
->get_seqno(signaller
, false), seqno
))
3171 /* cursory check for an unkickable deadlock */
3172 if (I915_READ_CTL(signaller
) & RING_WAIT_SEMAPHORE
&&
3173 semaphore_passed(signaller
) < 0)
3179 static void semaphore_clear_deadlocks(struct drm_i915_private
*dev_priv
)
3181 struct intel_engine_cs
*ring
;
3184 for_each_ring(ring
, dev_priv
, i
)
3185 ring
->hangcheck
.deadlock
= 0;
3188 static enum intel_ring_hangcheck_action
3189 ring_stuck(struct intel_engine_cs
*ring
, u64 acthd
)
3191 struct drm_device
*dev
= ring
->dev
;
3192 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3195 if (acthd
!= ring
->hangcheck
.acthd
) {
3196 if (acthd
> ring
->hangcheck
.max_acthd
) {
3197 ring
->hangcheck
.max_acthd
= acthd
;
3198 return HANGCHECK_ACTIVE
;
3201 return HANGCHECK_ACTIVE_LOOP
;
3205 return HANGCHECK_HUNG
;
3207 /* Is the chip hanging on a WAIT_FOR_EVENT?
3208 * If so we can simply poke the RB_WAIT bit
3209 * and break the hang. This should work on
3210 * all but the second generation chipsets.
3212 tmp
= I915_READ_CTL(ring
);
3213 if (tmp
& RING_WAIT
) {
3214 i915_handle_error(dev
, false,
3215 "Kicking stuck wait on %s",
3217 I915_WRITE_CTL(ring
, tmp
);
3218 return HANGCHECK_KICK
;
3221 if (INTEL_INFO(dev
)->gen
>= 6 && tmp
& RING_WAIT_SEMAPHORE
) {
3222 switch (semaphore_passed(ring
)) {
3224 return HANGCHECK_HUNG
;
3226 i915_handle_error(dev
, false,
3227 "Kicking stuck semaphore on %s",
3229 I915_WRITE_CTL(ring
, tmp
);
3230 return HANGCHECK_KICK
;
3232 return HANGCHECK_WAIT
;
3236 return HANGCHECK_HUNG
;
3240 * This is called when the chip hasn't reported back with completed
3241 * batchbuffers in a long time. We keep track per ring seqno progress and
3242 * if there are no progress, hangcheck score for that ring is increased.
3243 * Further, acthd is inspected to see if the ring is stuck. On stuck case
3244 * we kick the ring. If we see no progress on three subsequent calls
3245 * we assume chip is wedged and try to fix it by resetting the chip.
3247 static void i915_hangcheck_elapsed(unsigned long data
)
3249 struct drm_device
*dev
= (struct drm_device
*)data
;
3250 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3251 struct intel_engine_cs
*ring
;
3253 int busy_count
= 0, rings_hung
= 0;
3254 bool stuck
[I915_NUM_RINGS
] = { 0 };
3259 if (!i915
.enable_hangcheck
)
3262 for_each_ring(ring
, dev_priv
, i
) {
3267 semaphore_clear_deadlocks(dev_priv
);
3269 seqno
= ring
->get_seqno(ring
, false);
3270 acthd
= intel_ring_get_active_head(ring
);
3272 if (ring
->hangcheck
.seqno
== seqno
) {
3273 if (ring_idle(ring
, seqno
)) {
3274 ring
->hangcheck
.action
= HANGCHECK_IDLE
;
3276 if (waitqueue_active(&ring
->irq_queue
)) {
3277 /* Issue a wake-up to catch stuck h/w. */
3278 if (!test_and_set_bit(ring
->id
, &dev_priv
->gpu_error
.missed_irq_rings
)) {
3279 if (!(dev_priv
->gpu_error
.test_irq_rings
& intel_ring_flag(ring
)))
3280 DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
3283 DRM_INFO("Fake missed irq on %s\n",
3285 wake_up_all(&ring
->irq_queue
);
3287 /* Safeguard against driver failure */
3288 ring
->hangcheck
.score
+= BUSY
;
3292 /* We always increment the hangcheck score
3293 * if the ring is busy and still processing
3294 * the same request, so that no single request
3295 * can run indefinitely (such as a chain of
3296 * batches). The only time we do not increment
3297 * the hangcheck score on this ring, if this
3298 * ring is in a legitimate wait for another
3299 * ring. In that case the waiting ring is a
3300 * victim and we want to be sure we catch the
3301 * right culprit. Then every time we do kick
3302 * the ring, add a small increment to the
3303 * score so that we can catch a batch that is
3304 * being repeatedly kicked and so responsible
3305 * for stalling the machine.
3307 ring
->hangcheck
.action
= ring_stuck(ring
,
3310 switch (ring
->hangcheck
.action
) {
3311 case HANGCHECK_IDLE
:
3312 case HANGCHECK_WAIT
:
3313 case HANGCHECK_ACTIVE
:
3315 case HANGCHECK_ACTIVE_LOOP
:
3316 ring
->hangcheck
.score
+= BUSY
;
3318 case HANGCHECK_KICK
:
3319 ring
->hangcheck
.score
+= KICK
;
3321 case HANGCHECK_HUNG
:
3322 ring
->hangcheck
.score
+= HUNG
;
3328 ring
->hangcheck
.action
= HANGCHECK_ACTIVE
;
3330 /* Gradually reduce the count so that we catch DoS
3331 * attempts across multiple batches.
3333 if (ring
->hangcheck
.score
> 0)
3334 ring
->hangcheck
.score
--;
3336 ring
->hangcheck
.acthd
= ring
->hangcheck
.max_acthd
= 0;
3339 ring
->hangcheck
.seqno
= seqno
;
3340 ring
->hangcheck
.acthd
= acthd
;
3344 for_each_ring(ring
, dev_priv
, i
) {
3345 if (ring
->hangcheck
.score
>= HANGCHECK_SCORE_RING_HUNG
) {
3346 DRM_INFO("%s on %s\n",
3347 stuck
[i
] ? "stuck" : "no progress",
3354 return i915_handle_error(dev
, true, "Ring hung");
3357 /* Reset timer case chip hangs without another request
3359 i915_queue_hangcheck(dev
);
3362 void i915_queue_hangcheck(struct drm_device
*dev
)
3364 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3365 if (!i915
.enable_hangcheck
)
3368 mod_timer(&dev_priv
->gpu_error
.hangcheck_timer
,
3369 round_jiffies_up(jiffies
+ DRM_I915_HANGCHECK_JIFFIES
));
3372 static void ibx_irq_reset(struct drm_device
*dev
)
3374 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3376 if (HAS_PCH_NOP(dev
))
3379 GEN5_IRQ_RESET(SDE
);
3381 if (HAS_PCH_CPT(dev
) || HAS_PCH_LPT(dev
))
3382 I915_WRITE(SERR_INT
, 0xffffffff);
3386 * SDEIER is also touched by the interrupt handler to work around missed PCH
3387 * interrupts. Hence we can't update it after the interrupt handler is enabled -
3388 * instead we unconditionally enable all PCH interrupt sources here, but then
3389 * only unmask them as needed with SDEIMR.
3391 * This function needs to be called before interrupts are enabled.
3393 static void ibx_irq_pre_postinstall(struct drm_device
*dev
)
3395 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3397 if (HAS_PCH_NOP(dev
))
3400 WARN_ON(I915_READ(SDEIER
) != 0);
3401 I915_WRITE(SDEIER
, 0xffffffff);
3402 POSTING_READ(SDEIER
);
3405 static void gen5_gt_irq_reset(struct drm_device
*dev
)
3407 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3410 if (INTEL_INFO(dev
)->gen
>= 6)
3411 GEN5_IRQ_RESET(GEN6_PM
);
3416 static void ironlake_irq_reset(struct drm_device
*dev
)
3418 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3420 I915_WRITE(HWSTAM
, 0xffffffff);
3424 I915_WRITE(GEN7_ERR_INT
, 0xffffffff);
3426 gen5_gt_irq_reset(dev
);
3431 static void valleyview_irq_preinstall(struct drm_device
*dev
)
3433 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3437 I915_WRITE(VLV_IMR
, 0);
3438 I915_WRITE(RING_IMR(RENDER_RING_BASE
), 0);
3439 I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE
), 0);
3440 I915_WRITE(RING_IMR(BLT_RING_BASE
), 0);
3443 I915_WRITE(GTIIR
, I915_READ(GTIIR
));
3444 I915_WRITE(GTIIR
, I915_READ(GTIIR
));
3446 gen5_gt_irq_reset(dev
);
3448 I915_WRITE(DPINVGTT
, 0xff);
3450 I915_WRITE(PORT_HOTPLUG_EN
, 0);
3451 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
3452 for_each_pipe(dev_priv
, pipe
)
3453 I915_WRITE(PIPESTAT(pipe
), 0xffff);
3454 I915_WRITE(VLV_IIR
, 0xffffffff);
3455 I915_WRITE(VLV_IMR
, 0xffffffff);
3456 I915_WRITE(VLV_IER
, 0x0);
3457 POSTING_READ(VLV_IER
);
3460 static void gen8_gt_irq_reset(struct drm_i915_private
*dev_priv
)
3462 GEN8_IRQ_RESET_NDX(GT
, 0);
3463 GEN8_IRQ_RESET_NDX(GT
, 1);
3464 GEN8_IRQ_RESET_NDX(GT
, 2);
3465 GEN8_IRQ_RESET_NDX(GT
, 3);
3468 static void gen8_irq_reset(struct drm_device
*dev
)
3470 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3473 I915_WRITE(GEN8_MASTER_IRQ
, 0);
3474 POSTING_READ(GEN8_MASTER_IRQ
);
3476 gen8_gt_irq_reset(dev_priv
);
3478 for_each_pipe(dev_priv
, pipe
)
3479 if (intel_display_power_enabled(dev_priv
,
3480 POWER_DOMAIN_PIPE(pipe
)))
3481 GEN8_IRQ_RESET_NDX(DE_PIPE
, pipe
);
3483 GEN5_IRQ_RESET(GEN8_DE_PORT_
);
3484 GEN5_IRQ_RESET(GEN8_DE_MISC_
);
3485 GEN5_IRQ_RESET(GEN8_PCU_
);
3490 void gen8_irq_power_well_post_enable(struct drm_i915_private
*dev_priv
)
3492 unsigned long irqflags
;
3494 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3495 GEN8_IRQ_INIT_NDX(DE_PIPE
, PIPE_B
, dev_priv
->de_irq_mask
[PIPE_B
],
3496 ~dev_priv
->de_irq_mask
[PIPE_B
]);
3497 GEN8_IRQ_INIT_NDX(DE_PIPE
, PIPE_C
, dev_priv
->de_irq_mask
[PIPE_C
],
3498 ~dev_priv
->de_irq_mask
[PIPE_C
]);
3499 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3502 static void cherryview_irq_preinstall(struct drm_device
*dev
)
3504 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3507 I915_WRITE(GEN8_MASTER_IRQ
, 0);
3508 POSTING_READ(GEN8_MASTER_IRQ
);
3510 gen8_gt_irq_reset(dev_priv
);
3512 GEN5_IRQ_RESET(GEN8_PCU_
);
3514 POSTING_READ(GEN8_PCU_IIR
);
3516 I915_WRITE(DPINVGTT
, DPINVGTT_STATUS_MASK_CHV
);
3518 I915_WRITE(PORT_HOTPLUG_EN
, 0);
3519 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
3521 for_each_pipe(dev_priv
, pipe
)
3522 I915_WRITE(PIPESTAT(pipe
), 0xffff);
3524 I915_WRITE(VLV_IMR
, 0xffffffff);
3525 I915_WRITE(VLV_IER
, 0x0);
3526 I915_WRITE(VLV_IIR
, 0xffffffff);
3527 POSTING_READ(VLV_IIR
);
3530 static void ibx_hpd_irq_setup(struct drm_device
*dev
)
3532 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3533 struct intel_encoder
*intel_encoder
;
3534 u32 hotplug_irqs
, hotplug
, enabled_irqs
= 0;
3536 if (HAS_PCH_IBX(dev
)) {
3537 hotplug_irqs
= SDE_HOTPLUG_MASK
;
3538 for_each_intel_encoder(dev
, intel_encoder
)
3539 if (dev_priv
->hpd_stats
[intel_encoder
->hpd_pin
].hpd_mark
== HPD_ENABLED
)
3540 enabled_irqs
|= hpd_ibx
[intel_encoder
->hpd_pin
];
3542 hotplug_irqs
= SDE_HOTPLUG_MASK_CPT
;
3543 for_each_intel_encoder(dev
, intel_encoder
)
3544 if (dev_priv
->hpd_stats
[intel_encoder
->hpd_pin
].hpd_mark
== HPD_ENABLED
)
3545 enabled_irqs
|= hpd_cpt
[intel_encoder
->hpd_pin
];
3548 ibx_display_interrupt_update(dev_priv
, hotplug_irqs
, enabled_irqs
);
3551 * Enable digital hotplug on the PCH, and configure the DP short pulse
3552 * duration to 2ms (which is the minimum in the Display Port spec)
3554 * This register is the same on all known PCH chips.
3556 hotplug
= I915_READ(PCH_PORT_HOTPLUG
);
3557 hotplug
&= ~(PORTD_PULSE_DURATION_MASK
|PORTC_PULSE_DURATION_MASK
|PORTB_PULSE_DURATION_MASK
);
3558 hotplug
|= PORTD_HOTPLUG_ENABLE
| PORTD_PULSE_DURATION_2ms
;
3559 hotplug
|= PORTC_HOTPLUG_ENABLE
| PORTC_PULSE_DURATION_2ms
;
3560 hotplug
|= PORTB_HOTPLUG_ENABLE
| PORTB_PULSE_DURATION_2ms
;
3561 I915_WRITE(PCH_PORT_HOTPLUG
, hotplug
);
3564 static void ibx_irq_postinstall(struct drm_device
*dev
)
3566 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3569 if (HAS_PCH_NOP(dev
))
3572 if (HAS_PCH_IBX(dev
))
3573 mask
= SDE_GMBUS
| SDE_AUX_MASK
| SDE_POISON
;
3575 mask
= SDE_GMBUS_CPT
| SDE_AUX_MASK_CPT
;
3577 GEN5_ASSERT_IIR_IS_ZERO(SDEIIR
);
3578 I915_WRITE(SDEIMR
, ~mask
);
3581 static void gen5_gt_irq_postinstall(struct drm_device
*dev
)
3583 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3584 u32 pm_irqs
, gt_irqs
;
3586 pm_irqs
= gt_irqs
= 0;
3588 dev_priv
->gt_irq_mask
= ~0;
3589 if (HAS_L3_DPF(dev
)) {
3590 /* L3 parity interrupt is always unmasked. */
3591 dev_priv
->gt_irq_mask
= ~GT_PARITY_ERROR(dev
);
3592 gt_irqs
|= GT_PARITY_ERROR(dev
);
3595 gt_irqs
|= GT_RENDER_USER_INTERRUPT
;
3597 gt_irqs
|= GT_RENDER_PIPECTL_NOTIFY_INTERRUPT
|
3598 ILK_BSD_USER_INTERRUPT
;
3600 gt_irqs
|= GT_BLT_USER_INTERRUPT
| GT_BSD_USER_INTERRUPT
;
3603 GEN5_IRQ_INIT(GT
, dev_priv
->gt_irq_mask
, gt_irqs
);
3605 if (INTEL_INFO(dev
)->gen
>= 6) {
3606 pm_irqs
|= dev_priv
->pm_rps_events
;
3609 pm_irqs
|= PM_VEBOX_USER_INTERRUPT
;
3611 dev_priv
->pm_irq_mask
= 0xffffffff;
3612 GEN5_IRQ_INIT(GEN6_PM
, dev_priv
->pm_irq_mask
, pm_irqs
);
3616 static int ironlake_irq_postinstall(struct drm_device
*dev
)
3618 unsigned long irqflags
;
3619 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3620 u32 display_mask
, extra_mask
;
3622 if (INTEL_INFO(dev
)->gen
>= 7) {
3623 display_mask
= (DE_MASTER_IRQ_CONTROL
| DE_GSE_IVB
|
3624 DE_PCH_EVENT_IVB
| DE_PLANEC_FLIP_DONE_IVB
|
3625 DE_PLANEB_FLIP_DONE_IVB
|
3626 DE_PLANEA_FLIP_DONE_IVB
| DE_AUX_CHANNEL_A_IVB
);
3627 extra_mask
= (DE_PIPEC_VBLANK_IVB
| DE_PIPEB_VBLANK_IVB
|
3628 DE_PIPEA_VBLANK_IVB
| DE_ERR_INT_IVB
);
3630 display_mask
= (DE_MASTER_IRQ_CONTROL
| DE_GSE
| DE_PCH_EVENT
|
3631 DE_PLANEA_FLIP_DONE
| DE_PLANEB_FLIP_DONE
|
3633 DE_PIPEB_CRC_DONE
| DE_PIPEA_CRC_DONE
|
3635 extra_mask
= DE_PIPEA_VBLANK
| DE_PIPEB_VBLANK
| DE_PCU_EVENT
|
3636 DE_PIPEB_FIFO_UNDERRUN
| DE_PIPEA_FIFO_UNDERRUN
;
3639 dev_priv
->irq_mask
= ~display_mask
;
3641 I915_WRITE(HWSTAM
, 0xeffe);
3643 ibx_irq_pre_postinstall(dev
);
3645 GEN5_IRQ_INIT(DE
, dev_priv
->irq_mask
, display_mask
| extra_mask
);
3647 gen5_gt_irq_postinstall(dev
);
3649 ibx_irq_postinstall(dev
);
3651 if (IS_IRONLAKE_M(dev
)) {
3652 /* Enable PCU event interrupts
3654 * spinlocking not required here for correctness since interrupt
3655 * setup is guaranteed to run in single-threaded context. But we
3656 * need it to make the assert_spin_locked happy. */
3657 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3658 ironlake_enable_display_irq(dev_priv
, DE_PCU_EVENT
);
3659 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3665 static void valleyview_display_irqs_install(struct drm_i915_private
*dev_priv
)
3670 pipestat_mask
= PIPESTAT_INT_STATUS_MASK
|
3671 PIPE_FIFO_UNDERRUN_STATUS
;
3673 I915_WRITE(PIPESTAT(PIPE_A
), pipestat_mask
);
3674 I915_WRITE(PIPESTAT(PIPE_B
), pipestat_mask
);
3675 POSTING_READ(PIPESTAT(PIPE_A
));
3677 pipestat_mask
= PLANE_FLIP_DONE_INT_STATUS_VLV
|
3678 PIPE_CRC_DONE_INTERRUPT_STATUS
;
3680 i915_enable_pipestat(dev_priv
, PIPE_A
, pipestat_mask
|
3681 PIPE_GMBUS_INTERRUPT_STATUS
);
3682 i915_enable_pipestat(dev_priv
, PIPE_B
, pipestat_mask
);
3684 iir_mask
= I915_DISPLAY_PORT_INTERRUPT
|
3685 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
3686 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
;
3687 dev_priv
->irq_mask
&= ~iir_mask
;
3689 I915_WRITE(VLV_IIR
, iir_mask
);
3690 I915_WRITE(VLV_IIR
, iir_mask
);
3691 I915_WRITE(VLV_IMR
, dev_priv
->irq_mask
);
3692 I915_WRITE(VLV_IER
, ~dev_priv
->irq_mask
);
3693 POSTING_READ(VLV_IER
);
3696 static void valleyview_display_irqs_uninstall(struct drm_i915_private
*dev_priv
)
3701 iir_mask
= I915_DISPLAY_PORT_INTERRUPT
|
3702 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
3703 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
;
3705 dev_priv
->irq_mask
|= iir_mask
;
3706 I915_WRITE(VLV_IER
, ~dev_priv
->irq_mask
);
3707 I915_WRITE(VLV_IMR
, dev_priv
->irq_mask
);
3708 I915_WRITE(VLV_IIR
, iir_mask
);
3709 I915_WRITE(VLV_IIR
, iir_mask
);
3710 POSTING_READ(VLV_IIR
);
3712 pipestat_mask
= PLANE_FLIP_DONE_INT_STATUS_VLV
|
3713 PIPE_CRC_DONE_INTERRUPT_STATUS
;
3715 i915_disable_pipestat(dev_priv
, PIPE_A
, pipestat_mask
|
3716 PIPE_GMBUS_INTERRUPT_STATUS
);
3717 i915_disable_pipestat(dev_priv
, PIPE_B
, pipestat_mask
);
3719 pipestat_mask
= PIPESTAT_INT_STATUS_MASK
|
3720 PIPE_FIFO_UNDERRUN_STATUS
;
3721 I915_WRITE(PIPESTAT(PIPE_A
), pipestat_mask
);
3722 I915_WRITE(PIPESTAT(PIPE_B
), pipestat_mask
);
3723 POSTING_READ(PIPESTAT(PIPE_A
));
3726 void valleyview_enable_display_irqs(struct drm_i915_private
*dev_priv
)
3728 assert_spin_locked(&dev_priv
->irq_lock
);
3730 if (dev_priv
->display_irqs_enabled
)
3733 dev_priv
->display_irqs_enabled
= true;
3735 if (dev_priv
->dev
->irq_enabled
)
3736 valleyview_display_irqs_install(dev_priv
);
3739 void valleyview_disable_display_irqs(struct drm_i915_private
*dev_priv
)
3741 assert_spin_locked(&dev_priv
->irq_lock
);
3743 if (!dev_priv
->display_irqs_enabled
)
3746 dev_priv
->display_irqs_enabled
= false;
3748 if (dev_priv
->dev
->irq_enabled
)
3749 valleyview_display_irqs_uninstall(dev_priv
);
3752 static int valleyview_irq_postinstall(struct drm_device
*dev
)
3754 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3755 unsigned long irqflags
;
3757 dev_priv
->irq_mask
= ~0;
3759 I915_WRITE(PORT_HOTPLUG_EN
, 0);
3760 POSTING_READ(PORT_HOTPLUG_EN
);
3762 I915_WRITE(VLV_IMR
, dev_priv
->irq_mask
);
3763 I915_WRITE(VLV_IER
, ~dev_priv
->irq_mask
);
3764 I915_WRITE(VLV_IIR
, 0xffffffff);
3765 POSTING_READ(VLV_IER
);
3767 /* Interrupt setup is already guaranteed to be single-threaded, this is
3768 * just to make the assert_spin_locked check happy. */
3769 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3770 if (dev_priv
->display_irqs_enabled
)
3771 valleyview_display_irqs_install(dev_priv
);
3772 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3774 I915_WRITE(VLV_IIR
, 0xffffffff);
3775 I915_WRITE(VLV_IIR
, 0xffffffff);
3777 gen5_gt_irq_postinstall(dev
);
3779 /* ack & enable invalid PTE error interrupts */
3780 #if 0 /* FIXME: add support to irq handler for checking these bits */
3781 I915_WRITE(DPINVGTT
, DPINVGTT_STATUS_MASK
);
3782 I915_WRITE(DPINVGTT
, DPINVGTT_EN_MASK
);
3785 I915_WRITE(VLV_MASTER_IER
, MASTER_INTERRUPT_ENABLE
);
3790 static void gen8_gt_irq_postinstall(struct drm_i915_private
*dev_priv
)
3792 /* These are interrupts we'll toggle with the ring mask register */
3793 uint32_t gt_interrupts
[] = {
3794 GT_RENDER_USER_INTERRUPT
<< GEN8_RCS_IRQ_SHIFT
|
3795 GT_CONTEXT_SWITCH_INTERRUPT
<< GEN8_RCS_IRQ_SHIFT
|
3796 GT_RENDER_L3_PARITY_ERROR_INTERRUPT
|
3797 GT_RENDER_USER_INTERRUPT
<< GEN8_BCS_IRQ_SHIFT
|
3798 GT_CONTEXT_SWITCH_INTERRUPT
<< GEN8_BCS_IRQ_SHIFT
,
3799 GT_RENDER_USER_INTERRUPT
<< GEN8_VCS1_IRQ_SHIFT
|
3800 GT_CONTEXT_SWITCH_INTERRUPT
<< GEN8_VCS1_IRQ_SHIFT
|
3801 GT_RENDER_USER_INTERRUPT
<< GEN8_VCS2_IRQ_SHIFT
|
3802 GT_CONTEXT_SWITCH_INTERRUPT
<< GEN8_VCS2_IRQ_SHIFT
,
3804 GT_RENDER_USER_INTERRUPT
<< GEN8_VECS_IRQ_SHIFT
|
3805 GT_CONTEXT_SWITCH_INTERRUPT
<< GEN8_VECS_IRQ_SHIFT
3808 dev_priv
->pm_irq_mask
= 0xffffffff;
3809 GEN8_IRQ_INIT_NDX(GT
, 0, ~gt_interrupts
[0], gt_interrupts
[0]);
3810 GEN8_IRQ_INIT_NDX(GT
, 1, ~gt_interrupts
[1], gt_interrupts
[1]);
3811 GEN8_IRQ_INIT_NDX(GT
, 2, dev_priv
->pm_irq_mask
, dev_priv
->pm_rps_events
);
3812 GEN8_IRQ_INIT_NDX(GT
, 3, ~gt_interrupts
[3], gt_interrupts
[3]);
3815 static void gen8_de_irq_postinstall(struct drm_i915_private
*dev_priv
)
3817 uint32_t de_pipe_masked
= GEN8_PIPE_CDCLK_CRC_DONE
;
3818 uint32_t de_pipe_enables
;
3821 if (IS_GEN9(dev_priv
))
3822 de_pipe_masked
|= GEN9_PIPE_PLANE1_FLIP_DONE
|
3823 GEN9_DE_PIPE_IRQ_FAULT_ERRORS
;
3825 de_pipe_masked
|= GEN8_PIPE_PRIMARY_FLIP_DONE
|
3826 GEN8_DE_PIPE_IRQ_FAULT_ERRORS
;
3828 de_pipe_enables
= de_pipe_masked
| GEN8_PIPE_VBLANK
|
3829 GEN8_PIPE_FIFO_UNDERRUN
;
3831 dev_priv
->de_irq_mask
[PIPE_A
] = ~de_pipe_masked
;
3832 dev_priv
->de_irq_mask
[PIPE_B
] = ~de_pipe_masked
;
3833 dev_priv
->de_irq_mask
[PIPE_C
] = ~de_pipe_masked
;
3835 for_each_pipe(dev_priv
, pipe
)
3836 if (intel_display_power_enabled(dev_priv
,
3837 POWER_DOMAIN_PIPE(pipe
)))
3838 GEN8_IRQ_INIT_NDX(DE_PIPE
, pipe
,
3839 dev_priv
->de_irq_mask
[pipe
],
3842 GEN5_IRQ_INIT(GEN8_DE_PORT_
, ~GEN8_AUX_CHANNEL_A
, GEN8_AUX_CHANNEL_A
);
3845 static int gen8_irq_postinstall(struct drm_device
*dev
)
3847 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3849 ibx_irq_pre_postinstall(dev
);
3851 gen8_gt_irq_postinstall(dev_priv
);
3852 gen8_de_irq_postinstall(dev_priv
);
3854 ibx_irq_postinstall(dev
);
3856 I915_WRITE(GEN8_MASTER_IRQ
, DE_MASTER_IRQ_CONTROL
);
3857 POSTING_READ(GEN8_MASTER_IRQ
);
3862 static int cherryview_irq_postinstall(struct drm_device
*dev
)
3864 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3865 u32 enable_mask
= I915_DISPLAY_PORT_INTERRUPT
|
3866 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
3867 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
3868 I915_DISPLAY_PIPE_C_EVENT_INTERRUPT
;
3869 u32 pipestat_enable
= PLANE_FLIP_DONE_INT_STATUS_VLV
|
3870 PIPE_CRC_DONE_INTERRUPT_STATUS
;
3871 unsigned long irqflags
;
3875 * Leave vblank interrupts masked initially. enable/disable will
3876 * toggle them based on usage.
3878 dev_priv
->irq_mask
= ~enable_mask
;
3880 for_each_pipe(dev_priv
, pipe
)
3881 I915_WRITE(PIPESTAT(pipe
), 0xffff);
3883 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3884 i915_enable_pipestat(dev_priv
, PIPE_A
, PIPE_GMBUS_INTERRUPT_STATUS
);
3885 for_each_pipe(dev_priv
, pipe
)
3886 i915_enable_pipestat(dev_priv
, pipe
, pipestat_enable
);
3887 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3889 I915_WRITE(VLV_IIR
, 0xffffffff);
3890 I915_WRITE(VLV_IMR
, dev_priv
->irq_mask
);
3891 I915_WRITE(VLV_IER
, enable_mask
);
3893 gen8_gt_irq_postinstall(dev_priv
);
3895 I915_WRITE(GEN8_MASTER_IRQ
, MASTER_INTERRUPT_ENABLE
);
3896 POSTING_READ(GEN8_MASTER_IRQ
);
3901 static void gen8_irq_uninstall(struct drm_device
*dev
)
3903 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3908 gen8_irq_reset(dev
);
3911 static void valleyview_irq_uninstall(struct drm_device
*dev
)
3913 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3914 unsigned long irqflags
;
3920 I915_WRITE(VLV_MASTER_IER
, 0);
3922 for_each_pipe(dev_priv
, pipe
)
3923 I915_WRITE(PIPESTAT(pipe
), 0xffff);
3925 I915_WRITE(HWSTAM
, 0xffffffff);
3926 I915_WRITE(PORT_HOTPLUG_EN
, 0);
3927 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
3929 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
3930 if (dev_priv
->display_irqs_enabled
)
3931 valleyview_display_irqs_uninstall(dev_priv
);
3932 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
3934 dev_priv
->irq_mask
= 0;
3936 I915_WRITE(VLV_IIR
, 0xffffffff);
3937 I915_WRITE(VLV_IMR
, 0xffffffff);
3938 I915_WRITE(VLV_IER
, 0x0);
3939 POSTING_READ(VLV_IER
);
3942 static void cherryview_irq_uninstall(struct drm_device
*dev
)
3944 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3950 I915_WRITE(GEN8_MASTER_IRQ
, 0);
3951 POSTING_READ(GEN8_MASTER_IRQ
);
3953 #define GEN8_IRQ_FINI_NDX(type, which) \
3955 I915_WRITE(GEN8_##type##_IMR(which), 0xffffffff); \
3956 I915_WRITE(GEN8_##type##_IER(which), 0); \
3957 I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
3958 POSTING_READ(GEN8_##type##_IIR(which)); \
3959 I915_WRITE(GEN8_##type##_IIR(which), 0xffffffff); \
3962 #define GEN8_IRQ_FINI(type) \
3964 I915_WRITE(GEN8_##type##_IMR, 0xffffffff); \
3965 I915_WRITE(GEN8_##type##_IER, 0); \
3966 I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
3967 POSTING_READ(GEN8_##type##_IIR); \
3968 I915_WRITE(GEN8_##type##_IIR, 0xffffffff); \
3971 GEN8_IRQ_FINI_NDX(GT
, 0);
3972 GEN8_IRQ_FINI_NDX(GT
, 1);
3973 GEN8_IRQ_FINI_NDX(GT
, 2);
3974 GEN8_IRQ_FINI_NDX(GT
, 3);
3978 #undef GEN8_IRQ_FINI
3979 #undef GEN8_IRQ_FINI_NDX
3981 I915_WRITE(PORT_HOTPLUG_EN
, 0);
3982 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
3984 for_each_pipe(dev_priv
, pipe
)
3985 I915_WRITE(PIPESTAT(pipe
), 0xffff);
3987 I915_WRITE(VLV_IMR
, 0xffffffff);
3988 I915_WRITE(VLV_IER
, 0x0);
3989 I915_WRITE(VLV_IIR
, 0xffffffff);
3990 POSTING_READ(VLV_IIR
);
3993 static void ironlake_irq_uninstall(struct drm_device
*dev
)
3995 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4000 ironlake_irq_reset(dev
);
4003 static void i8xx_irq_preinstall(struct drm_device
* dev
)
4005 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4008 for_each_pipe(dev_priv
, pipe
)
4009 I915_WRITE(PIPESTAT(pipe
), 0);
4010 I915_WRITE16(IMR
, 0xffff);
4011 I915_WRITE16(IER
, 0x0);
4012 POSTING_READ16(IER
);
4015 static int i8xx_irq_postinstall(struct drm_device
*dev
)
4017 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4018 unsigned long irqflags
;
4021 ~(I915_ERROR_PAGE_TABLE
| I915_ERROR_MEMORY_REFRESH
));
4023 /* Unmask the interrupts that we always want on. */
4024 dev_priv
->irq_mask
=
4025 ~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
4026 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
4027 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4028 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
|
4029 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
);
4030 I915_WRITE16(IMR
, dev_priv
->irq_mask
);
4033 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
4034 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
4035 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
|
4036 I915_USER_INTERRUPT
);
4037 POSTING_READ16(IER
);
4039 /* Interrupt setup is already guaranteed to be single-threaded, this is
4040 * just to make the assert_spin_locked check happy. */
4041 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4042 i915_enable_pipestat(dev_priv
, PIPE_A
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4043 i915_enable_pipestat(dev_priv
, PIPE_B
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4044 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4050 * Returns true when a page flip has completed.
4052 static bool i8xx_handle_vblank(struct drm_device
*dev
,
4053 int plane
, int pipe
, u32 iir
)
4055 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4056 u16 flip_pending
= DISPLAY_PLANE_FLIP_PENDING(plane
);
4058 if (!intel_pipe_handle_vblank(dev
, pipe
))
4061 if ((iir
& flip_pending
) == 0)
4062 goto check_page_flip
;
4064 intel_prepare_page_flip(dev
, plane
);
4066 /* We detect FlipDone by looking for the change in PendingFlip from '1'
4067 * to '0' on the following vblank, i.e. IIR has the Pendingflip
4068 * asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
4069 * the flip is completed (no longer pending). Since this doesn't raise
4070 * an interrupt per se, we watch for the change at vblank.
4072 if (I915_READ16(ISR
) & flip_pending
)
4073 goto check_page_flip
;
4075 intel_finish_page_flip(dev
, pipe
);
4079 intel_check_page_flip(dev
, pipe
);
4083 static irqreturn_t
i8xx_irq_handler(int irq
, void *arg
)
4085 struct drm_device
*dev
= arg
;
4086 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4089 unsigned long irqflags
;
4092 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4093 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
;
4095 iir
= I915_READ16(IIR
);
4099 while (iir
& ~flip_mask
) {
4100 /* Can't rely on pipestat interrupt bit in iir as it might
4101 * have been cleared after the pipestat interrupt was received.
4102 * It doesn't set the bit in iir again, but it still produces
4103 * interrupts (for non-MSI).
4105 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4106 if (iir
& I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
)
4107 i915_handle_error(dev
, false,
4108 "Command parser error, iir 0x%08x",
4111 for_each_pipe(dev_priv
, pipe
) {
4112 int reg
= PIPESTAT(pipe
);
4113 pipe_stats
[pipe
] = I915_READ(reg
);
4116 * Clear the PIPE*STAT regs before the IIR
4118 if (pipe_stats
[pipe
] & 0x8000ffff)
4119 I915_WRITE(reg
, pipe_stats
[pipe
]);
4121 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4123 I915_WRITE16(IIR
, iir
& ~flip_mask
);
4124 new_iir
= I915_READ16(IIR
); /* Flush posted writes */
4126 i915_update_dri1_breadcrumb(dev
);
4128 if (iir
& I915_USER_INTERRUPT
)
4129 notify_ring(dev
, &dev_priv
->ring
[RCS
]);
4131 for_each_pipe(dev_priv
, pipe
) {
4136 if (pipe_stats
[pipe
] & PIPE_VBLANK_INTERRUPT_STATUS
&&
4137 i8xx_handle_vblank(dev
, plane
, pipe
, iir
))
4138 flip_mask
&= ~DISPLAY_PLANE_FLIP_PENDING(plane
);
4140 if (pipe_stats
[pipe
] & PIPE_CRC_DONE_INTERRUPT_STATUS
)
4141 i9xx_pipe_crc_irq_handler(dev
, pipe
);
4143 if (pipe_stats
[pipe
] & PIPE_FIFO_UNDERRUN_STATUS
&&
4144 intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, false))
4145 DRM_ERROR("pipe %c underrun\n", pipe_name(pipe
));
4154 static void i8xx_irq_uninstall(struct drm_device
* dev
)
4156 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4159 for_each_pipe(dev_priv
, pipe
) {
4160 /* Clear enable bits; then clear status bits */
4161 I915_WRITE(PIPESTAT(pipe
), 0);
4162 I915_WRITE(PIPESTAT(pipe
), I915_READ(PIPESTAT(pipe
)));
4164 I915_WRITE16(IMR
, 0xffff);
4165 I915_WRITE16(IER
, 0x0);
4166 I915_WRITE16(IIR
, I915_READ16(IIR
));
4169 static void i915_irq_preinstall(struct drm_device
* dev
)
4171 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4174 if (I915_HAS_HOTPLUG(dev
)) {
4175 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4176 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
4179 I915_WRITE16(HWSTAM
, 0xeffe);
4180 for_each_pipe(dev_priv
, pipe
)
4181 I915_WRITE(PIPESTAT(pipe
), 0);
4182 I915_WRITE(IMR
, 0xffffffff);
4183 I915_WRITE(IER
, 0x0);
4187 static int i915_irq_postinstall(struct drm_device
*dev
)
4189 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4191 unsigned long irqflags
;
4193 I915_WRITE(EMR
, ~(I915_ERROR_PAGE_TABLE
| I915_ERROR_MEMORY_REFRESH
));
4195 /* Unmask the interrupts that we always want on. */
4196 dev_priv
->irq_mask
=
4197 ~(I915_ASLE_INTERRUPT
|
4198 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
4199 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
4200 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4201 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
|
4202 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
);
4205 I915_ASLE_INTERRUPT
|
4206 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
4207 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
4208 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
|
4209 I915_USER_INTERRUPT
;
4211 if (I915_HAS_HOTPLUG(dev
)) {
4212 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4213 POSTING_READ(PORT_HOTPLUG_EN
);
4215 /* Enable in IER... */
4216 enable_mask
|= I915_DISPLAY_PORT_INTERRUPT
;
4217 /* and unmask in IMR */
4218 dev_priv
->irq_mask
&= ~I915_DISPLAY_PORT_INTERRUPT
;
4221 I915_WRITE(IMR
, dev_priv
->irq_mask
);
4222 I915_WRITE(IER
, enable_mask
);
4225 i915_enable_asle_pipestat(dev
);
4227 /* Interrupt setup is already guaranteed to be single-threaded, this is
4228 * just to make the assert_spin_locked check happy. */
4229 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4230 i915_enable_pipestat(dev_priv
, PIPE_A
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4231 i915_enable_pipestat(dev_priv
, PIPE_B
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4232 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4238 * Returns true when a page flip has completed.
4240 static bool i915_handle_vblank(struct drm_device
*dev
,
4241 int plane
, int pipe
, u32 iir
)
4243 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4244 u32 flip_pending
= DISPLAY_PLANE_FLIP_PENDING(plane
);
4246 if (!intel_pipe_handle_vblank(dev
, pipe
))
4249 if ((iir
& flip_pending
) == 0)
4250 goto check_page_flip
;
4252 intel_prepare_page_flip(dev
, plane
);
4254 /* We detect FlipDone by looking for the change in PendingFlip from '1'
4255 * to '0' on the following vblank, i.e. IIR has the Pendingflip
4256 * asserted following the MI_DISPLAY_FLIP, but ISR is deasserted, hence
4257 * the flip is completed (no longer pending). Since this doesn't raise
4258 * an interrupt per se, we watch for the change at vblank.
4260 if (I915_READ(ISR
) & flip_pending
)
4261 goto check_page_flip
;
4263 intel_finish_page_flip(dev
, pipe
);
4267 intel_check_page_flip(dev
, pipe
);
4271 static irqreturn_t
i915_irq_handler(int irq
, void *arg
)
4273 struct drm_device
*dev
= arg
;
4274 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4275 u32 iir
, new_iir
, pipe_stats
[I915_MAX_PIPES
];
4276 unsigned long irqflags
;
4278 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4279 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
;
4280 int pipe
, ret
= IRQ_NONE
;
4282 iir
= I915_READ(IIR
);
4284 bool irq_received
= (iir
& ~flip_mask
) != 0;
4285 bool blc_event
= false;
4287 /* Can't rely on pipestat interrupt bit in iir as it might
4288 * have been cleared after the pipestat interrupt was received.
4289 * It doesn't set the bit in iir again, but it still produces
4290 * interrupts (for non-MSI).
4292 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4293 if (iir
& I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
)
4294 i915_handle_error(dev
, false,
4295 "Command parser error, iir 0x%08x",
4298 for_each_pipe(dev_priv
, pipe
) {
4299 int reg
= PIPESTAT(pipe
);
4300 pipe_stats
[pipe
] = I915_READ(reg
);
4302 /* Clear the PIPE*STAT regs before the IIR */
4303 if (pipe_stats
[pipe
] & 0x8000ffff) {
4304 I915_WRITE(reg
, pipe_stats
[pipe
]);
4305 irq_received
= true;
4308 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4313 /* Consume port. Then clear IIR or we'll miss events */
4314 if (I915_HAS_HOTPLUG(dev
) &&
4315 iir
& I915_DISPLAY_PORT_INTERRUPT
)
4316 i9xx_hpd_irq_handler(dev
);
4318 I915_WRITE(IIR
, iir
& ~flip_mask
);
4319 new_iir
= I915_READ(IIR
); /* Flush posted writes */
4321 if (iir
& I915_USER_INTERRUPT
)
4322 notify_ring(dev
, &dev_priv
->ring
[RCS
]);
4324 for_each_pipe(dev_priv
, pipe
) {
4329 if (pipe_stats
[pipe
] & PIPE_VBLANK_INTERRUPT_STATUS
&&
4330 i915_handle_vblank(dev
, plane
, pipe
, iir
))
4331 flip_mask
&= ~DISPLAY_PLANE_FLIP_PENDING(plane
);
4333 if (pipe_stats
[pipe
] & PIPE_LEGACY_BLC_EVENT_STATUS
)
4336 if (pipe_stats
[pipe
] & PIPE_CRC_DONE_INTERRUPT_STATUS
)
4337 i9xx_pipe_crc_irq_handler(dev
, pipe
);
4339 if (pipe_stats
[pipe
] & PIPE_FIFO_UNDERRUN_STATUS
&&
4340 intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, false))
4341 DRM_ERROR("pipe %c underrun\n", pipe_name(pipe
));
4344 if (blc_event
|| (iir
& I915_ASLE_INTERRUPT
))
4345 intel_opregion_asle_intr(dev
);
4347 /* With MSI, interrupts are only generated when iir
4348 * transitions from zero to nonzero. If another bit got
4349 * set while we were handling the existing iir bits, then
4350 * we would never get another interrupt.
4352 * This is fine on non-MSI as well, as if we hit this path
4353 * we avoid exiting the interrupt handler only to generate
4356 * Note that for MSI this could cause a stray interrupt report
4357 * if an interrupt landed in the time between writing IIR and
4358 * the posting read. This should be rare enough to never
4359 * trigger the 99% of 100,000 interrupts test for disabling
4364 } while (iir
& ~flip_mask
);
4366 i915_update_dri1_breadcrumb(dev
);
4371 static void i915_irq_uninstall(struct drm_device
* dev
)
4373 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4376 if (I915_HAS_HOTPLUG(dev
)) {
4377 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4378 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
4381 I915_WRITE16(HWSTAM
, 0xffff);
4382 for_each_pipe(dev_priv
, pipe
) {
4383 /* Clear enable bits; then clear status bits */
4384 I915_WRITE(PIPESTAT(pipe
), 0);
4385 I915_WRITE(PIPESTAT(pipe
), I915_READ(PIPESTAT(pipe
)));
4387 I915_WRITE(IMR
, 0xffffffff);
4388 I915_WRITE(IER
, 0x0);
4390 I915_WRITE(IIR
, I915_READ(IIR
));
4393 static void i965_irq_preinstall(struct drm_device
* dev
)
4395 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4398 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4399 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
4401 I915_WRITE(HWSTAM
, 0xeffe);
4402 for_each_pipe(dev_priv
, pipe
)
4403 I915_WRITE(PIPESTAT(pipe
), 0);
4404 I915_WRITE(IMR
, 0xffffffff);
4405 I915_WRITE(IER
, 0x0);
4409 static int i965_irq_postinstall(struct drm_device
*dev
)
4411 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4414 unsigned long irqflags
;
4416 /* Unmask the interrupts that we always want on. */
4417 dev_priv
->irq_mask
= ~(I915_ASLE_INTERRUPT
|
4418 I915_DISPLAY_PORT_INTERRUPT
|
4419 I915_DISPLAY_PIPE_A_EVENT_INTERRUPT
|
4420 I915_DISPLAY_PIPE_B_EVENT_INTERRUPT
|
4421 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4422 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
|
4423 I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
);
4425 enable_mask
= ~dev_priv
->irq_mask
;
4426 enable_mask
&= ~(I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4427 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
);
4428 enable_mask
|= I915_USER_INTERRUPT
;
4431 enable_mask
|= I915_BSD_USER_INTERRUPT
;
4433 /* Interrupt setup is already guaranteed to be single-threaded, this is
4434 * just to make the assert_spin_locked check happy. */
4435 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4436 i915_enable_pipestat(dev_priv
, PIPE_A
, PIPE_GMBUS_INTERRUPT_STATUS
);
4437 i915_enable_pipestat(dev_priv
, PIPE_A
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4438 i915_enable_pipestat(dev_priv
, PIPE_B
, PIPE_CRC_DONE_INTERRUPT_STATUS
);
4439 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4442 * Enable some error detection, note the instruction error mask
4443 * bit is reserved, so we leave it masked.
4446 error_mask
= ~(GM45_ERROR_PAGE_TABLE
|
4447 GM45_ERROR_MEM_PRIV
|
4448 GM45_ERROR_CP_PRIV
|
4449 I915_ERROR_MEMORY_REFRESH
);
4451 error_mask
= ~(I915_ERROR_PAGE_TABLE
|
4452 I915_ERROR_MEMORY_REFRESH
);
4454 I915_WRITE(EMR
, error_mask
);
4456 I915_WRITE(IMR
, dev_priv
->irq_mask
);
4457 I915_WRITE(IER
, enable_mask
);
4460 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4461 POSTING_READ(PORT_HOTPLUG_EN
);
4463 i915_enable_asle_pipestat(dev
);
4468 static void i915_hpd_irq_setup(struct drm_device
*dev
)
4470 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4471 struct intel_encoder
*intel_encoder
;
4474 assert_spin_locked(&dev_priv
->irq_lock
);
4476 if (I915_HAS_HOTPLUG(dev
)) {
4477 hotplug_en
= I915_READ(PORT_HOTPLUG_EN
);
4478 hotplug_en
&= ~HOTPLUG_INT_EN_MASK
;
4479 /* Note HDMI and DP share hotplug bits */
4480 /* enable bits are the same for all generations */
4481 for_each_intel_encoder(dev
, intel_encoder
)
4482 if (dev_priv
->hpd_stats
[intel_encoder
->hpd_pin
].hpd_mark
== HPD_ENABLED
)
4483 hotplug_en
|= hpd_mask_i915
[intel_encoder
->hpd_pin
];
4484 /* Programming the CRT detection parameters tends
4485 to generate a spurious hotplug event about three
4486 seconds later. So just do it once.
4489 hotplug_en
|= CRT_HOTPLUG_ACTIVATION_PERIOD_64
;
4490 hotplug_en
&= ~CRT_HOTPLUG_VOLTAGE_COMPARE_MASK
;
4491 hotplug_en
|= CRT_HOTPLUG_VOLTAGE_COMPARE_50
;
4493 /* Ignore TV since it's buggy */
4494 I915_WRITE(PORT_HOTPLUG_EN
, hotplug_en
);
4498 static irqreturn_t
i965_irq_handler(int irq
, void *arg
)
4500 struct drm_device
*dev
= arg
;
4501 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4503 u32 pipe_stats
[I915_MAX_PIPES
];
4504 unsigned long irqflags
;
4505 int ret
= IRQ_NONE
, pipe
;
4507 I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
|
4508 I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
;
4510 iir
= I915_READ(IIR
);
4513 bool irq_received
= (iir
& ~flip_mask
) != 0;
4514 bool blc_event
= false;
4516 /* Can't rely on pipestat interrupt bit in iir as it might
4517 * have been cleared after the pipestat interrupt was received.
4518 * It doesn't set the bit in iir again, but it still produces
4519 * interrupts (for non-MSI).
4521 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4522 if (iir
& I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT
)
4523 i915_handle_error(dev
, false,
4524 "Command parser error, iir 0x%08x",
4527 for_each_pipe(dev_priv
, pipe
) {
4528 int reg
= PIPESTAT(pipe
);
4529 pipe_stats
[pipe
] = I915_READ(reg
);
4532 * Clear the PIPE*STAT regs before the IIR
4534 if (pipe_stats
[pipe
] & 0x8000ffff) {
4535 I915_WRITE(reg
, pipe_stats
[pipe
]);
4536 irq_received
= true;
4539 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4546 /* Consume port. Then clear IIR or we'll miss events */
4547 if (iir
& I915_DISPLAY_PORT_INTERRUPT
)
4548 i9xx_hpd_irq_handler(dev
);
4550 I915_WRITE(IIR
, iir
& ~flip_mask
);
4551 new_iir
= I915_READ(IIR
); /* Flush posted writes */
4553 if (iir
& I915_USER_INTERRUPT
)
4554 notify_ring(dev
, &dev_priv
->ring
[RCS
]);
4555 if (iir
& I915_BSD_USER_INTERRUPT
)
4556 notify_ring(dev
, &dev_priv
->ring
[VCS
]);
4558 for_each_pipe(dev_priv
, pipe
) {
4559 if (pipe_stats
[pipe
] & PIPE_START_VBLANK_INTERRUPT_STATUS
&&
4560 i915_handle_vblank(dev
, pipe
, pipe
, iir
))
4561 flip_mask
&= ~DISPLAY_PLANE_FLIP_PENDING(pipe
);
4563 if (pipe_stats
[pipe
] & PIPE_LEGACY_BLC_EVENT_STATUS
)
4566 if (pipe_stats
[pipe
] & PIPE_CRC_DONE_INTERRUPT_STATUS
)
4567 i9xx_pipe_crc_irq_handler(dev
, pipe
);
4569 if (pipe_stats
[pipe
] & PIPE_FIFO_UNDERRUN_STATUS
&&
4570 intel_set_cpu_fifo_underrun_reporting(dev
, pipe
, false))
4571 DRM_ERROR("pipe %c underrun\n", pipe_name(pipe
));
4574 if (blc_event
|| (iir
& I915_ASLE_INTERRUPT
))
4575 intel_opregion_asle_intr(dev
);
4577 if (pipe_stats
[0] & PIPE_GMBUS_INTERRUPT_STATUS
)
4578 gmbus_irq_handler(dev
);
4580 /* With MSI, interrupts are only generated when iir
4581 * transitions from zero to nonzero. If another bit got
4582 * set while we were handling the existing iir bits, then
4583 * we would never get another interrupt.
4585 * This is fine on non-MSI as well, as if we hit this path
4586 * we avoid exiting the interrupt handler only to generate
4589 * Note that for MSI this could cause a stray interrupt report
4590 * if an interrupt landed in the time between writing IIR and
4591 * the posting read. This should be rare enough to never
4592 * trigger the 99% of 100,000 interrupts test for disabling
4598 i915_update_dri1_breadcrumb(dev
);
4603 static void i965_irq_uninstall(struct drm_device
* dev
)
4605 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4611 I915_WRITE(PORT_HOTPLUG_EN
, 0);
4612 I915_WRITE(PORT_HOTPLUG_STAT
, I915_READ(PORT_HOTPLUG_STAT
));
4614 I915_WRITE(HWSTAM
, 0xffffffff);
4615 for_each_pipe(dev_priv
, pipe
)
4616 I915_WRITE(PIPESTAT(pipe
), 0);
4617 I915_WRITE(IMR
, 0xffffffff);
4618 I915_WRITE(IER
, 0x0);
4620 for_each_pipe(dev_priv
, pipe
)
4621 I915_WRITE(PIPESTAT(pipe
),
4622 I915_READ(PIPESTAT(pipe
)) & 0x8000ffff);
4623 I915_WRITE(IIR
, I915_READ(IIR
));
4626 static void intel_hpd_irq_reenable(struct work_struct
*work
)
4628 struct drm_i915_private
*dev_priv
=
4629 container_of(work
, typeof(*dev_priv
),
4630 hotplug_reenable_work
.work
);
4631 struct drm_device
*dev
= dev_priv
->dev
;
4632 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
4633 unsigned long irqflags
;
4636 intel_runtime_pm_get(dev_priv
);
4638 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4639 for (i
= (HPD_NONE
+ 1); i
< HPD_NUM_PINS
; i
++) {
4640 struct drm_connector
*connector
;
4642 if (dev_priv
->hpd_stats
[i
].hpd_mark
!= HPD_DISABLED
)
4645 dev_priv
->hpd_stats
[i
].hpd_mark
= HPD_ENABLED
;
4647 list_for_each_entry(connector
, &mode_config
->connector_list
, head
) {
4648 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4650 if (intel_connector
->encoder
->hpd_pin
== i
) {
4651 if (connector
->polled
!= intel_connector
->polled
)
4652 DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
4654 connector
->polled
= intel_connector
->polled
;
4655 if (!connector
->polled
)
4656 connector
->polled
= DRM_CONNECTOR_POLL_HPD
;
4660 if (dev_priv
->display
.hpd_irq_setup
)
4661 dev_priv
->display
.hpd_irq_setup(dev
);
4662 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4664 intel_runtime_pm_put(dev_priv
);
4667 void intel_irq_init(struct drm_device
*dev
)
4669 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4671 INIT_WORK(&dev_priv
->hotplug_work
, i915_hotplug_work_func
);
4672 INIT_WORK(&dev_priv
->dig_port_work
, i915_digport_work_func
);
4673 INIT_WORK(&dev_priv
->gpu_error
.work
, i915_error_work_func
);
4674 INIT_WORK(&dev_priv
->rps
.work
, gen6_pm_rps_work
);
4675 INIT_WORK(&dev_priv
->l3_parity
.error_work
, ivybridge_parity_work
);
4677 /* Let's track the enabled rps events */
4678 if (IS_VALLEYVIEW(dev
) && !IS_CHERRYVIEW(dev
))
4679 /* WaGsvRC0ResidencyMethod:vlv */
4680 dev_priv
->pm_rps_events
= GEN6_PM_RP_UP_EI_EXPIRED
;
4682 dev_priv
->pm_rps_events
= GEN6_PM_RPS_EVENTS
;
4684 setup_timer(&dev_priv
->gpu_error
.hangcheck_timer
,
4685 i915_hangcheck_elapsed
,
4686 (unsigned long) dev
);
4687 INIT_DELAYED_WORK(&dev_priv
->hotplug_reenable_work
,
4688 intel_hpd_irq_reenable
);
4690 pm_qos_add_request(&dev_priv
->pm_qos
, PM_QOS_CPU_DMA_LATENCY
, PM_QOS_DEFAULT_VALUE
);
4692 /* Haven't installed the IRQ handler yet */
4693 dev_priv
->pm
._irqs_disabled
= true;
4696 dev
->max_vblank_count
= 0;
4697 dev
->driver
->get_vblank_counter
= i8xx_get_vblank_counter
;
4698 } else if (IS_G4X(dev
) || INTEL_INFO(dev
)->gen
>= 5) {
4699 dev
->max_vblank_count
= 0xffffffff; /* full 32 bit counter */
4700 dev
->driver
->get_vblank_counter
= gm45_get_vblank_counter
;
4702 dev
->driver
->get_vblank_counter
= i915_get_vblank_counter
;
4703 dev
->max_vblank_count
= 0xffffff; /* only 24 bits of frame count */
4707 * Opt out of the vblank disable timer on everything except gen2.
4708 * Gen2 doesn't have a hardware frame counter and so depends on
4709 * vblank interrupts to produce sane vblank seuquence numbers.
4712 dev
->vblank_disable_immediate
= true;
4714 if (drm_core_check_feature(dev
, DRIVER_MODESET
)) {
4715 dev
->driver
->get_vblank_timestamp
= i915_get_vblank_timestamp
;
4716 dev
->driver
->get_scanout_position
= i915_get_crtc_scanoutpos
;
4719 if (IS_CHERRYVIEW(dev
)) {
4720 dev
->driver
->irq_handler
= cherryview_irq_handler
;
4721 dev
->driver
->irq_preinstall
= cherryview_irq_preinstall
;
4722 dev
->driver
->irq_postinstall
= cherryview_irq_postinstall
;
4723 dev
->driver
->irq_uninstall
= cherryview_irq_uninstall
;
4724 dev
->driver
->enable_vblank
= valleyview_enable_vblank
;
4725 dev
->driver
->disable_vblank
= valleyview_disable_vblank
;
4726 dev_priv
->display
.hpd_irq_setup
= i915_hpd_irq_setup
;
4727 } else if (IS_VALLEYVIEW(dev
)) {
4728 dev
->driver
->irq_handler
= valleyview_irq_handler
;
4729 dev
->driver
->irq_preinstall
= valleyview_irq_preinstall
;
4730 dev
->driver
->irq_postinstall
= valleyview_irq_postinstall
;
4731 dev
->driver
->irq_uninstall
= valleyview_irq_uninstall
;
4732 dev
->driver
->enable_vblank
= valleyview_enable_vblank
;
4733 dev
->driver
->disable_vblank
= valleyview_disable_vblank
;
4734 dev_priv
->display
.hpd_irq_setup
= i915_hpd_irq_setup
;
4735 } else if (INTEL_INFO(dev
)->gen
>= 8) {
4736 dev
->driver
->irq_handler
= gen8_irq_handler
;
4737 dev
->driver
->irq_preinstall
= gen8_irq_reset
;
4738 dev
->driver
->irq_postinstall
= gen8_irq_postinstall
;
4739 dev
->driver
->irq_uninstall
= gen8_irq_uninstall
;
4740 dev
->driver
->enable_vblank
= gen8_enable_vblank
;
4741 dev
->driver
->disable_vblank
= gen8_disable_vblank
;
4742 dev_priv
->display
.hpd_irq_setup
= ibx_hpd_irq_setup
;
4743 } else if (HAS_PCH_SPLIT(dev
)) {
4744 dev
->driver
->irq_handler
= ironlake_irq_handler
;
4745 dev
->driver
->irq_preinstall
= ironlake_irq_reset
;
4746 dev
->driver
->irq_postinstall
= ironlake_irq_postinstall
;
4747 dev
->driver
->irq_uninstall
= ironlake_irq_uninstall
;
4748 dev
->driver
->enable_vblank
= ironlake_enable_vblank
;
4749 dev
->driver
->disable_vblank
= ironlake_disable_vblank
;
4750 dev_priv
->display
.hpd_irq_setup
= ibx_hpd_irq_setup
;
4752 if (INTEL_INFO(dev
)->gen
== 2) {
4753 dev
->driver
->irq_preinstall
= i8xx_irq_preinstall
;
4754 dev
->driver
->irq_postinstall
= i8xx_irq_postinstall
;
4755 dev
->driver
->irq_handler
= i8xx_irq_handler
;
4756 dev
->driver
->irq_uninstall
= i8xx_irq_uninstall
;
4757 } else if (INTEL_INFO(dev
)->gen
== 3) {
4758 dev
->driver
->irq_preinstall
= i915_irq_preinstall
;
4759 dev
->driver
->irq_postinstall
= i915_irq_postinstall
;
4760 dev
->driver
->irq_uninstall
= i915_irq_uninstall
;
4761 dev
->driver
->irq_handler
= i915_irq_handler
;
4762 dev_priv
->display
.hpd_irq_setup
= i915_hpd_irq_setup
;
4764 dev
->driver
->irq_preinstall
= i965_irq_preinstall
;
4765 dev
->driver
->irq_postinstall
= i965_irq_postinstall
;
4766 dev
->driver
->irq_uninstall
= i965_irq_uninstall
;
4767 dev
->driver
->irq_handler
= i965_irq_handler
;
4768 dev_priv
->display
.hpd_irq_setup
= i915_hpd_irq_setup
;
4770 dev
->driver
->enable_vblank
= i915_enable_vblank
;
4771 dev
->driver
->disable_vblank
= i915_disable_vblank
;
4775 void intel_hpd_init(struct drm_device
*dev
)
4777 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4778 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
4779 struct drm_connector
*connector
;
4780 unsigned long irqflags
;
4783 for (i
= 1; i
< HPD_NUM_PINS
; i
++) {
4784 dev_priv
->hpd_stats
[i
].hpd_cnt
= 0;
4785 dev_priv
->hpd_stats
[i
].hpd_mark
= HPD_ENABLED
;
4787 list_for_each_entry(connector
, &mode_config
->connector_list
, head
) {
4788 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4789 connector
->polled
= intel_connector
->polled
;
4790 if (connector
->encoder
&& !connector
->polled
&& I915_HAS_HOTPLUG(dev
) && intel_connector
->encoder
->hpd_pin
> HPD_NONE
)
4791 connector
->polled
= DRM_CONNECTOR_POLL_HPD
;
4792 if (intel_connector
->mst_port
)
4793 connector
->polled
= DRM_CONNECTOR_POLL_HPD
;
4796 /* Interrupt setup is already guaranteed to be single-threaded, this is
4797 * just to make the assert_spin_locked checks happy. */
4798 spin_lock_irqsave(&dev_priv
->irq_lock
, irqflags
);
4799 if (dev_priv
->display
.hpd_irq_setup
)
4800 dev_priv
->display
.hpd_irq_setup(dev
);
4801 spin_unlock_irqrestore(&dev_priv
->irq_lock
, irqflags
);
4804 /* Disable interrupts so we can allow runtime PM. */
4805 void intel_runtime_pm_disable_interrupts(struct drm_device
*dev
)
4807 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4809 dev
->driver
->irq_uninstall(dev
);
4810 dev_priv
->pm
._irqs_disabled
= true;
4813 /* Restore interrupts so we can recover from runtime PM. */
4814 void intel_runtime_pm_restore_interrupts(struct drm_device
*dev
)
4816 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4818 dev_priv
->pm
._irqs_disabled
= false;
4819 dev
->driver
->irq_preinstall(dev
);
4820 dev
->driver
->irq_postinstall(dev
);