1 /* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
12 * The above copyright notice and this permission notice (including the
13 * next paragraph) shall be included in all copies or substantial portions
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
17 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
19 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
20 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
21 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
22 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
28 #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
31 * The Bridge device's PCI config space has information about the
32 * fb aperture size and the amount of pre-reserved memory.
33 * This is all handled in the intel-gtt.ko module. i915.ko only
34 * cares about the vga bit for the vga rbiter.
36 #define INTEL_GMCH_CTRL 0x52
37 #define INTEL_GMCH_VGA_DISABLE (1 << 1)
39 /* PCI config space */
41 #define HPLLCC 0xc0 /* 855 only */
42 #define GC_CLOCK_CONTROL_MASK (0xf << 0)
43 #define GC_CLOCK_133_200 (0 << 0)
44 #define GC_CLOCK_100_200 (1 << 0)
45 #define GC_CLOCK_100_133 (2 << 0)
46 #define GC_CLOCK_166_250 (3 << 0)
48 #define GCFGC 0xf0 /* 915+ only */
49 #define GC_LOW_FREQUENCY_ENABLE (1 << 7)
50 #define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4)
51 #define GC_DISPLAY_CLOCK_333_MHZ (4 << 4)
52 #define GC_DISPLAY_CLOCK_MASK (7 << 4)
53 #define GM45_GC_RENDER_CLOCK_MASK (0xf << 0)
54 #define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0)
55 #define GM45_GC_RENDER_CLOCK_320_MHZ (9 << 0)
56 #define GM45_GC_RENDER_CLOCK_400_MHZ (0xb << 0)
57 #define GM45_GC_RENDER_CLOCK_533_MHZ (0xc << 0)
58 #define I965_GC_RENDER_CLOCK_MASK (0xf << 0)
59 #define I965_GC_RENDER_CLOCK_267_MHZ (2 << 0)
60 #define I965_GC_RENDER_CLOCK_333_MHZ (3 << 0)
61 #define I965_GC_RENDER_CLOCK_444_MHZ (4 << 0)
62 #define I965_GC_RENDER_CLOCK_533_MHZ (5 << 0)
63 #define I945_GC_RENDER_CLOCK_MASK (7 << 0)
64 #define I945_GC_RENDER_CLOCK_166_MHZ (0 << 0)
65 #define I945_GC_RENDER_CLOCK_200_MHZ (1 << 0)
66 #define I945_GC_RENDER_CLOCK_250_MHZ (3 << 0)
67 #define I945_GC_RENDER_CLOCK_400_MHZ (5 << 0)
68 #define I915_GC_RENDER_CLOCK_MASK (7 << 0)
69 #define I915_GC_RENDER_CLOCK_166_MHZ (0 << 0)
70 #define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0)
71 #define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0)
74 /* Graphics reset regs */
75 #define I965_GDRST 0xc0 /* PCI config register */
76 #define ILK_GDSR 0x2ca4 /* MCHBAR offset */
77 #define GRDOM_FULL (0<<2)
78 #define GRDOM_RENDER (1<<2)
79 #define GRDOM_MEDIA (3<<2)
81 #define GEN6_GDRST 0x941c
82 #define GEN6_GRDOM_FULL (1 << 0)
83 #define GEN6_GRDOM_RENDER (1 << 1)
84 #define GEN6_GRDOM_MEDIA (1 << 2)
85 #define GEN6_GRDOM_BLT (1 << 3)
89 #define VGA_ST01_MDA 0x3ba
90 #define VGA_ST01_CGA 0x3da
92 #define VGA_MSR_WRITE 0x3c2
93 #define VGA_MSR_READ 0x3cc
94 #define VGA_MSR_MEM_EN (1<<1)
95 #define VGA_MSR_CGA_MODE (1<<0)
97 #define VGA_SR_INDEX 0x3c4
98 #define VGA_SR_DATA 0x3c5
100 #define VGA_AR_INDEX 0x3c0
101 #define VGA_AR_VID_EN (1<<5)
102 #define VGA_AR_DATA_WRITE 0x3c0
103 #define VGA_AR_DATA_READ 0x3c1
105 #define VGA_GR_INDEX 0x3ce
106 #define VGA_GR_DATA 0x3cf
108 #define VGA_GR_MEM_READ_MODE_SHIFT 3
109 #define VGA_GR_MEM_READ_MODE_PLANE 1
111 #define VGA_GR_MEM_MODE_MASK 0xc
112 #define VGA_GR_MEM_MODE_SHIFT 2
113 #define VGA_GR_MEM_A0000_AFFFF 0
114 #define VGA_GR_MEM_A0000_BFFFF 1
115 #define VGA_GR_MEM_B0000_B7FFF 2
116 #define VGA_GR_MEM_B0000_BFFFF 3
118 #define VGA_DACMASK 0x3c6
119 #define VGA_DACRX 0x3c7
120 #define VGA_DACWX 0x3c8
121 #define VGA_DACDATA 0x3c9
123 #define VGA_CR_INDEX_MDA 0x3b4
124 #define VGA_CR_DATA_MDA 0x3b5
125 #define VGA_CR_INDEX_CGA 0x3d4
126 #define VGA_CR_DATA_CGA 0x3d5
129 * Memory interface instructions used by the kernel
131 #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
133 #define MI_NOOP MI_INSTR(0, 0)
134 #define MI_USER_INTERRUPT MI_INSTR(0x02, 0)
135 #define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0)
136 #define MI_WAIT_FOR_OVERLAY_FLIP (1<<16)
137 #define MI_WAIT_FOR_PLANE_B_FLIP (1<<6)
138 #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2)
139 #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
140 #define MI_FLUSH MI_INSTR(0x04, 0)
141 #define MI_READ_FLUSH (1 << 0)
142 #define MI_EXE_FLUSH (1 << 1)
143 #define MI_NO_WRITE_FLUSH (1 << 2)
144 #define MI_SCENE_COUNT (1 << 3) /* just increment scene count */
145 #define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */
146 #define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */
147 #define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)
148 #define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0)
149 #define MI_SUSPEND_FLUSH_EN (1<<0)
150 #define MI_REPORT_HEAD MI_INSTR(0x07, 0)
151 #define MI_OVERLAY_FLIP MI_INSTR(0x11,0)
152 #define MI_OVERLAY_CONTINUE (0x0<<21)
153 #define MI_OVERLAY_ON (0x1<<21)
154 #define MI_OVERLAY_OFF (0x2<<21)
155 #define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
156 #define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
157 #define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
158 #define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
159 #define MI_SET_CONTEXT MI_INSTR(0x18, 0)
160 #define MI_MM_SPACE_GTT (1<<8)
161 #define MI_MM_SPACE_PHYSICAL (0<<8)
162 #define MI_SAVE_EXT_STATE_EN (1<<3)
163 #define MI_RESTORE_EXT_STATE_EN (1<<2)
164 #define MI_FORCE_RESTORE (1<<1)
165 #define MI_RESTORE_INHIBIT (1<<0)
166 #define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)
167 #define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */
168 #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
169 #define MI_STORE_DWORD_INDEX_SHIFT 2
170 /* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM:
171 * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw
172 * simply ignores the register load under certain conditions.
173 * - One can actually load arbitrary many arbitrary registers: Simply issue x
174 * address/value pairs. Don't overdue it, though, x <= 2^4 must hold!
176 #define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1)
177 #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */
178 #define MI_INVALIDATE_TLB (1<<18)
179 #define MI_INVALIDATE_BSD (1<<7)
180 #define MI_BATCH_BUFFER MI_INSTR(0x30, 1)
181 #define MI_BATCH_NON_SECURE (1)
182 #define MI_BATCH_NON_SECURE_I965 (1<<8)
183 #define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0)
184 #define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1) /* gen6+ */
185 #define MI_SEMAPHORE_GLOBAL_GTT (1<<22)
186 #define MI_SEMAPHORE_UPDATE (1<<21)
187 #define MI_SEMAPHORE_COMPARE (1<<20)
188 #define MI_SEMAPHORE_REGISTER (1<<18)
190 * 3D instructions used by the kernel
192 #define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
194 #define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24))
195 #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19))
196 #define SC_UPDATE_SCISSOR (0x1<<1)
197 #define SC_ENABLE_MASK (0x1<<0)
198 #define SC_ENABLE (0x1<<0)
199 #define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16))
200 #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
201 #define SCI_YMIN_MASK (0xffff<<16)
202 #define SCI_XMIN_MASK (0xffff<<0)
203 #define SCI_YMAX_MASK (0xffff<<16)
204 #define SCI_XMAX_MASK (0xffff<<0)
205 #define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19))
206 #define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
207 #define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
208 #define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16))
209 #define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4)
210 #define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
211 #define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
212 #define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
213 #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
214 #define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4)
215 #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6)
216 #define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5)
217 #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21)
218 #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20)
219 #define BLT_DEPTH_8 (0<<24)
220 #define BLT_DEPTH_16_565 (1<<24)
221 #define BLT_DEPTH_16_1555 (2<<24)
222 #define BLT_DEPTH_32 (3<<24)
223 #define BLT_ROP_GXCOPY (0xcc<<16)
224 #define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */
225 #define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */
226 #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
227 #define ASYNC_FLIP (1<<22)
228 #define DISPLAY_PLANE_A (0<<20)
229 #define DISPLAY_PLANE_B (1<<20)
230 #define GFX_OP_PIPE_CONTROL ((0x3<<29)|(0x3<<27)|(0x2<<24)|2)
231 #define PIPE_CONTROL_QW_WRITE (1<<14)
232 #define PIPE_CONTROL_DEPTH_STALL (1<<13)
233 #define PIPE_CONTROL_WC_FLUSH (1<<12)
234 #define PIPE_CONTROL_IS_FLUSH (1<<11) /* MBZ on Ironlake */
235 #define PIPE_CONTROL_TC_FLUSH (1<<10) /* GM45+ only */
236 #define PIPE_CONTROL_ISP_DIS (1<<9)
237 #define PIPE_CONTROL_NOTIFY (1<<8)
238 #define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
239 #define PIPE_CONTROL_STALL_EN (1<<1) /* in addr word, Ironlake+ only */
245 #define DEBUG_RESET_I830 0x6070
246 #define DEBUG_RESET_FULL (1<<7)
247 #define DEBUG_RESET_RENDER (1<<8)
248 #define DEBUG_RESET_DISPLAY (1<<9)
254 #define FENCE_REG_830_0 0x2000
255 #define FENCE_REG_945_8 0x3000
256 #define I830_FENCE_START_MASK 0x07f80000
257 #define I830_FENCE_TILING_Y_SHIFT 12
258 #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
259 #define I830_FENCE_PITCH_SHIFT 4
260 #define I830_FENCE_REG_VALID (1<<0)
261 #define I915_FENCE_MAX_PITCH_VAL 4
262 #define I830_FENCE_MAX_PITCH_VAL 6
263 #define I830_FENCE_MAX_SIZE_VAL (1<<8)
265 #define I915_FENCE_START_MASK 0x0ff00000
266 #define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8)
268 #define FENCE_REG_965_0 0x03000
269 #define I965_FENCE_PITCH_SHIFT 2
270 #define I965_FENCE_TILING_Y_SHIFT 1
271 #define I965_FENCE_REG_VALID (1<<0)
272 #define I965_FENCE_MAX_PITCH_VAL 0x0400
274 #define FENCE_REG_SANDYBRIDGE_0 0x100000
275 #define SANDYBRIDGE_FENCE_PITCH_SHIFT 32
278 * Instruction and interrupt control regs
280 #define PGTBL_ER 0x02024
281 #define RENDER_RING_BASE 0x02000
282 #define BSD_RING_BASE 0x04000
283 #define GEN6_BSD_RING_BASE 0x12000
284 #define BLT_RING_BASE 0x22000
285 #define RING_TAIL(base) ((base)+0x30)
286 #define RING_HEAD(base) ((base)+0x34)
287 #define RING_START(base) ((base)+0x38)
288 #define RING_CTL(base) ((base)+0x3c)
289 #define RING_SYNC_0(base) ((base)+0x40)
290 #define RING_SYNC_1(base) ((base)+0x44)
291 #define RING_MAX_IDLE(base) ((base)+0x54)
292 #define RING_HWS_PGA(base) ((base)+0x80)
293 #define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
294 #define RENDER_HWS_PGA_GEN7 (0x04080)
295 #define BSD_HWS_PGA_GEN7 (0x04180)
296 #define BLT_HWS_PGA_GEN7 (0x04280)
297 #define RING_ACTHD(base) ((base)+0x74)
298 #define RING_NOPID(base) ((base)+0x94)
299 #define RING_IMR(base) ((base)+0xa8)
300 #define TAIL_ADDR 0x001FFFF8
301 #define HEAD_WRAP_COUNT 0xFFE00000
302 #define HEAD_WRAP_ONE 0x00200000
303 #define HEAD_ADDR 0x001FFFFC
304 #define RING_NR_PAGES 0x001FF000
305 #define RING_REPORT_MASK 0x00000006
306 #define RING_REPORT_64K 0x00000002
307 #define RING_REPORT_128K 0x00000004
308 #define RING_NO_REPORT 0x00000000
309 #define RING_VALID_MASK 0x00000001
310 #define RING_VALID 0x00000001
311 #define RING_INVALID 0x00000000
312 #define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */
313 #define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */
314 #define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */
316 #define PRB0_TAIL 0x02030
317 #define PRB0_HEAD 0x02034
318 #define PRB0_START 0x02038
319 #define PRB0_CTL 0x0203c
320 #define PRB1_TAIL 0x02040 /* 915+ only */
321 #define PRB1_HEAD 0x02044 /* 915+ only */
322 #define PRB1_START 0x02048 /* 915+ only */
323 #define PRB1_CTL 0x0204c /* 915+ only */
325 #define IPEIR_I965 0x02064
326 #define IPEHR_I965 0x02068
327 #define INSTDONE_I965 0x0206c
328 #define INSTPS 0x02070 /* 965+ only */
329 #define INSTDONE1 0x0207c /* 965+ only */
330 #define ACTHD_I965 0x02074
331 #define HWS_PGA 0x02080
332 #define HWS_ADDRESS_MASK 0xfffff000
333 #define HWS_START_ADDRESS_SHIFT 4
334 #define PWRCTXA 0x2088 /* 965GM+ only */
335 #define PWRCTX_EN (1<<0)
336 #define IPEIR 0x02088
337 #define IPEHR 0x0208c
338 #define INSTDONE 0x02090
339 #define NOPID 0x02094
340 #define HWSTAM 0x02098
341 #define VCS_INSTDONE 0x1206C
342 #define VCS_IPEIR 0x12064
343 #define VCS_IPEHR 0x12068
344 #define VCS_ACTHD 0x12074
345 #define BCS_INSTDONE 0x2206C
346 #define BCS_IPEIR 0x22064
347 #define BCS_IPEHR 0x22068
348 #define BCS_ACTHD 0x22074
350 #define ERROR_GEN6 0x040a0
352 /* GM45+ chicken bits -- debug workaround bits that may be required
353 * for various sorts of correct behavior. The top 16 bits of each are
354 * the enables for writing to the corresponding low bit.
356 #define _3D_CHICKEN 0x02084
357 #define _3D_CHICKEN2 0x0208c
358 /* Disables pipelining of read flushes past the SF-WIZ interface.
359 * Required on all Ironlake steppings according to the B-Spec, but the
360 * particular danger of not doing so is not specified.
362 # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14)
363 #define _3D_CHICKEN3 0x02090
365 #define MI_MODE 0x0209c
366 # define VS_TIMER_DISPATCH (1 << 6)
367 # define MI_FLUSH_ENABLE (1 << 11)
369 #define GFX_MODE 0x02520
370 #define GFX_RUN_LIST_ENABLE (1<<15)
371 #define GFX_TLB_INVALIDATE_ALWAYS (1<<13)
372 #define GFX_SURFACE_FAULT_ENABLE (1<<12)
373 #define GFX_REPLAY_MODE (1<<11)
374 #define GFX_PSMI_GRANULARITY (1<<10)
375 #define GFX_PPGTT_ENABLE (1<<9)
377 #define SCPD0 0x0209c /* 915+ only */
382 #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
383 #define I915_DISPLAY_PORT_INTERRUPT (1<<17)
384 #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
385 #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
386 #define I915_HWB_OOM_INTERRUPT (1<<13)
387 #define I915_SYNC_STATUS_INTERRUPT (1<<12)
388 #define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
389 #define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
390 #define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
391 #define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
392 #define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
393 #define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
394 #define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
395 #define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
396 #define I915_DEBUG_INTERRUPT (1<<2)
397 #define I915_USER_INTERRUPT (1<<1)
398 #define I915_ASLE_INTERRUPT (1<<0)
399 #define I915_BSD_USER_INTERRUPT (1<<25)
403 #define GM45_ERROR_PAGE_TABLE (1<<5)
404 #define GM45_ERROR_MEM_PRIV (1<<4)
405 #define I915_ERROR_PAGE_TABLE (1<<4)
406 #define GM45_ERROR_CP_PRIV (1<<3)
407 #define I915_ERROR_MEMORY_REFRESH (1<<1)
408 #define I915_ERROR_INSTRUCTION (1<<0)
409 #define INSTPM 0x020c0
410 #define INSTPM_SELF_EN (1<<12) /* 915GM only */
411 #define INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts
412 will not assert AGPBUSY# and will only
413 be delivered when out of C3. */
414 #define ACTHD 0x020c8
415 #define FW_BLC 0x020d8
416 #define FW_BLC2 0x020dc
417 #define FW_BLC_SELF 0x020e0 /* 915+ only */
418 #define FW_BLC_SELF_EN_MASK (1<<31)
419 #define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */
420 #define FW_BLC_SELF_EN (1<<15) /* 945 only */
421 #define MM_BURST_LENGTH 0x00700000
422 #define MM_FIFO_WATERMARK 0x0001F000
423 #define LM_BURST_LENGTH 0x00000700
424 #define LM_FIFO_WATERMARK 0x0000001F
425 #define MI_ARB_STATE 0x020e4 /* 915+ only */
426 #define MI_ARB_MASK_SHIFT 16 /* shift for enable bits */
428 /* Make render/texture TLB fetches lower priorty than associated data
429 * fetches. This is not turned on by default
431 #define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15)
433 /* Isoch request wait on GTT enable (Display A/B/C streams).
434 * Make isoch requests stall on the TLB update. May cause
435 * display underruns (test mode only)
437 #define MI_ARB_ISOCH_WAIT_GTT (1 << 14)
439 /* Block grant count for isoch requests when block count is
440 * set to a finite value.
442 #define MI_ARB_BLOCK_GRANT_MASK (3 << 12)
443 #define MI_ARB_BLOCK_GRANT_8 (0 << 12) /* for 3 display planes */
444 #define MI_ARB_BLOCK_GRANT_4 (1 << 12) /* for 2 display planes */
445 #define MI_ARB_BLOCK_GRANT_2 (2 << 12) /* for 1 display plane */
446 #define MI_ARB_BLOCK_GRANT_0 (3 << 12) /* don't use */
448 /* Enable render writes to complete in C2/C3/C4 power states.
449 * If this isn't enabled, render writes are prevented in low
450 * power states. That seems bad to me.
452 #define MI_ARB_C3_LP_WRITE_ENABLE (1 << 11)
454 /* This acknowledges an async flip immediately instead
455 * of waiting for 2TLB fetches.
457 #define MI_ARB_ASYNC_FLIP_ACK_IMMEDIATE (1 << 10)
459 /* Enables non-sequential data reads through arbiter
461 #define MI_ARB_DUAL_DATA_PHASE_DISABLE (1 << 9)
463 /* Disable FSB snooping of cacheable write cycles from binner/render
466 #define MI_ARB_CACHE_SNOOP_DISABLE (1 << 8)
468 /* Arbiter time slice for non-isoch streams */
469 #define MI_ARB_TIME_SLICE_MASK (7 << 5)
470 #define MI_ARB_TIME_SLICE_1 (0 << 5)
471 #define MI_ARB_TIME_SLICE_2 (1 << 5)
472 #define MI_ARB_TIME_SLICE_4 (2 << 5)
473 #define MI_ARB_TIME_SLICE_6 (3 << 5)
474 #define MI_ARB_TIME_SLICE_8 (4 << 5)
475 #define MI_ARB_TIME_SLICE_10 (5 << 5)
476 #define MI_ARB_TIME_SLICE_14 (6 << 5)
477 #define MI_ARB_TIME_SLICE_16 (7 << 5)
479 /* Low priority grace period page size */
480 #define MI_ARB_LOW_PRIORITY_GRACE_4KB (0 << 4) /* default */
481 #define MI_ARB_LOW_PRIORITY_GRACE_8KB (1 << 4)
483 /* Disable display A/B trickle feed */
484 #define MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2)
486 /* Set display plane priority */
487 #define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */
488 #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */
490 #define CACHE_MODE_0 0x02120 /* 915+ only */
491 #define CM0_MASK_SHIFT 16
492 #define CM0_IZ_OPT_DISABLE (1<<6)
493 #define CM0_ZR_OPT_DISABLE (1<<5)
494 #define CM0_DEPTH_EVICT_DISABLE (1<<4)
495 #define CM0_COLOR_EVICT_DISABLE (1<<3)
496 #define CM0_DEPTH_WRITE_DISABLE (1<<1)
497 #define CM0_RC_OP_FLUSH_DISABLE (1<<0)
498 #define BB_ADDR 0x02140 /* 8 bytes */
499 #define GFX_FLSH_CNTL 0x02170 /* 915+ only */
500 #define ECOSKPD 0x021d0
501 #define ECO_GATING_CX_ONLY (1<<3)
502 #define ECO_FLIP_DONE (1<<0)
504 /* GEN6 interrupt control */
505 #define GEN6_RENDER_HWSTAM 0x2098
506 #define GEN6_RENDER_IMR 0x20a8
507 #define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
508 #define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
509 #define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6)
510 #define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
511 #define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
512 #define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
513 #define GEN6_RENDER_SYNC_STATUS (1 << 2)
514 #define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
515 #define GEN6_RENDER_USER_INTERRUPT (1 << 0)
517 #define GEN6_BLITTER_HWSTAM 0x22098
518 #define GEN6_BLITTER_IMR 0x220a8
519 #define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
520 #define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
521 #define GEN6_BLITTER_SYNC_STATUS (1 << 24)
522 #define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
524 #define GEN6_BLITTER_ECOSKPD 0x221d0
525 #define GEN6_BLITTER_LOCK_SHIFT 16
526 #define GEN6_BLITTER_FBC_NOTIFY (1<<3)
528 #define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050
529 #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK (1 << 16)
530 #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE (1 << 0)
531 #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0
532 #define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3)
534 #define GEN6_BSD_HWSTAM 0x12098
535 #define GEN6_BSD_IMR 0x120a8
536 #define GEN6_BSD_USER_INTERRUPT (1 << 12)
538 #define GEN6_BSD_RNCID 0x12198
541 * Framebuffer compression (915+ only)
544 #define FBC_CFB_BASE 0x03200 /* 4k page aligned */
545 #define FBC_LL_BASE 0x03204 /* 4k page aligned */
546 #define FBC_CONTROL 0x03208
547 #define FBC_CTL_EN (1<<31)
548 #define FBC_CTL_PERIODIC (1<<30)
549 #define FBC_CTL_INTERVAL_SHIFT (16)
550 #define FBC_CTL_UNCOMPRESSIBLE (1<<14)
551 #define FBC_CTL_C3_IDLE (1<<13)
552 #define FBC_CTL_STRIDE_SHIFT (5)
553 #define FBC_CTL_FENCENO (1<<0)
554 #define FBC_COMMAND 0x0320c
555 #define FBC_CMD_COMPRESS (1<<0)
556 #define FBC_STATUS 0x03210
557 #define FBC_STAT_COMPRESSING (1<<31)
558 #define FBC_STAT_COMPRESSED (1<<30)
559 #define FBC_STAT_MODIFIED (1<<29)
560 #define FBC_STAT_CURRENT_LINE (1<<0)
561 #define FBC_CONTROL2 0x03214
562 #define FBC_CTL_FENCE_DBL (0<<4)
563 #define FBC_CTL_IDLE_IMM (0<<2)
564 #define FBC_CTL_IDLE_FULL (1<<2)
565 #define FBC_CTL_IDLE_LINE (2<<2)
566 #define FBC_CTL_IDLE_DEBUG (3<<2)
567 #define FBC_CTL_CPU_FENCE (1<<1)
568 #define FBC_CTL_PLANEA (0<<0)
569 #define FBC_CTL_PLANEB (1<<0)
570 #define FBC_FENCE_OFF 0x0321b
571 #define FBC_TAG 0x03300
573 #define FBC_LL_SIZE (1536)
575 /* Framebuffer compression for GM45+ */
576 #define DPFC_CB_BASE 0x3200
577 #define DPFC_CONTROL 0x3208
578 #define DPFC_CTL_EN (1<<31)
579 #define DPFC_CTL_PLANEA (0<<30)
580 #define DPFC_CTL_PLANEB (1<<30)
581 #define DPFC_CTL_FENCE_EN (1<<29)
582 #define DPFC_SR_EN (1<<10)
583 #define DPFC_CTL_LIMIT_1X (0<<6)
584 #define DPFC_CTL_LIMIT_2X (1<<6)
585 #define DPFC_CTL_LIMIT_4X (2<<6)
586 #define DPFC_RECOMP_CTL 0x320c
587 #define DPFC_RECOMP_STALL_EN (1<<27)
588 #define DPFC_RECOMP_STALL_WM_SHIFT (16)
589 #define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000)
590 #define DPFC_RECOMP_TIMER_COUNT_SHIFT (0)
591 #define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f)
592 #define DPFC_STATUS 0x3210
593 #define DPFC_INVAL_SEG_SHIFT (16)
594 #define DPFC_INVAL_SEG_MASK (0x07ff0000)
595 #define DPFC_COMP_SEG_SHIFT (0)
596 #define DPFC_COMP_SEG_MASK (0x000003ff)
597 #define DPFC_STATUS2 0x3214
598 #define DPFC_FENCE_YOFF 0x3218
599 #define DPFC_CHICKEN 0x3224
600 #define DPFC_HT_MODIFY (1<<31)
602 /* Framebuffer compression for Ironlake */
603 #define ILK_DPFC_CB_BASE 0x43200
604 #define ILK_DPFC_CONTROL 0x43208
605 /* The bit 28-8 is reserved */
606 #define DPFC_RESERVED (0x1FFFFF00)
607 #define ILK_DPFC_RECOMP_CTL 0x4320c
608 #define ILK_DPFC_STATUS 0x43210
609 #define ILK_DPFC_FENCE_YOFF 0x43218
610 #define ILK_DPFC_CHICKEN 0x43224
611 #define ILK_FBC_RT_BASE 0x2128
612 #define ILK_FBC_RT_VALID (1<<0)
614 #define ILK_DISPLAY_CHICKEN1 0x42000
615 #define ILK_FBCQ_DIS (1<<22)
616 #define ILK_PABSTRETCH_DIS (1<<21)
620 * Framebuffer compression for Sandybridge
622 * The following two registers are of type GTTMMADR
624 #define SNB_DPFC_CTL_SA 0x100100
625 #define SNB_CPU_FENCE_ENABLE (1<<29)
626 #define DPFC_CPU_FENCE_OFFSET 0x100104
640 # define GPIO_CLOCK_DIR_MASK (1 << 0)
641 # define GPIO_CLOCK_DIR_IN (0 << 1)
642 # define GPIO_CLOCK_DIR_OUT (1 << 1)
643 # define GPIO_CLOCK_VAL_MASK (1 << 2)
644 # define GPIO_CLOCK_VAL_OUT (1 << 3)
645 # define GPIO_CLOCK_VAL_IN (1 << 4)
646 # define GPIO_CLOCK_PULLUP_DISABLE (1 << 5)
647 # define GPIO_DATA_DIR_MASK (1 << 8)
648 # define GPIO_DATA_DIR_IN (0 << 9)
649 # define GPIO_DATA_DIR_OUT (1 << 9)
650 # define GPIO_DATA_VAL_MASK (1 << 10)
651 # define GPIO_DATA_VAL_OUT (1 << 11)
652 # define GPIO_DATA_VAL_IN (1 << 12)
653 # define GPIO_DATA_PULLUP_DISABLE (1 << 13)
655 #define GMBUS0 0x5100 /* clock/port select */
656 #define GMBUS_RATE_100KHZ (0<<8)
657 #define GMBUS_RATE_50KHZ (1<<8)
658 #define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */
659 #define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */
660 #define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */
661 #define GMBUS_PORT_DISABLED 0
662 #define GMBUS_PORT_SSC 1
663 #define GMBUS_PORT_VGADDC 2
664 #define GMBUS_PORT_PANEL 3
665 #define GMBUS_PORT_DPC 4 /* HDMIC */
666 #define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */
668 #define GMBUS_PORT_DPD 7 /* HDMID */
669 #define GMBUS_NUM_PORTS 8
670 #define GMBUS1 0x5104 /* command/status */
671 #define GMBUS_SW_CLR_INT (1<<31)
672 #define GMBUS_SW_RDY (1<<30)
673 #define GMBUS_ENT (1<<29) /* enable timeout */
674 #define GMBUS_CYCLE_NONE (0<<25)
675 #define GMBUS_CYCLE_WAIT (1<<25)
676 #define GMBUS_CYCLE_INDEX (2<<25)
677 #define GMBUS_CYCLE_STOP (4<<25)
678 #define GMBUS_BYTE_COUNT_SHIFT 16
679 #define GMBUS_SLAVE_INDEX_SHIFT 8
680 #define GMBUS_SLAVE_ADDR_SHIFT 1
681 #define GMBUS_SLAVE_READ (1<<0)
682 #define GMBUS_SLAVE_WRITE (0<<0)
683 #define GMBUS2 0x5108 /* status */
684 #define GMBUS_INUSE (1<<15)
685 #define GMBUS_HW_WAIT_PHASE (1<<14)
686 #define GMBUS_STALL_TIMEOUT (1<<13)
687 #define GMBUS_INT (1<<12)
688 #define GMBUS_HW_RDY (1<<11)
689 #define GMBUS_SATOER (1<<10)
690 #define GMBUS_ACTIVE (1<<9)
691 #define GMBUS3 0x510c /* data buffer bytes 3-0 */
692 #define GMBUS4 0x5110 /* interrupt mask (Pineview+) */
693 #define GMBUS_SLAVE_TIMEOUT_EN (1<<4)
694 #define GMBUS_NAK_EN (1<<3)
695 #define GMBUS_IDLE_EN (1<<2)
696 #define GMBUS_HW_WAIT_EN (1<<1)
697 #define GMBUS_HW_RDY_EN (1<<0)
698 #define GMBUS5 0x5120 /* byte index */
699 #define GMBUS_2BYTE_INDEX_EN (1<<31)
702 * Clock control & power management
707 #define VGA_PD 0x6010
708 #define VGA0_PD_P2_DIV_4 (1 << 7)
709 #define VGA0_PD_P1_DIV_2 (1 << 5)
710 #define VGA0_PD_P1_SHIFT 0
711 #define VGA0_PD_P1_MASK (0x1f << 0)
712 #define VGA1_PD_P2_DIV_4 (1 << 15)
713 #define VGA1_PD_P1_DIV_2 (1 << 13)
714 #define VGA1_PD_P1_SHIFT 8
715 #define VGA1_PD_P1_MASK (0x1f << 8)
716 #define _DPLL_A 0x06014
717 #define _DPLL_B 0x06018
718 #define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
719 #define DPLL_VCO_ENABLE (1 << 31)
720 #define DPLL_DVO_HIGH_SPEED (1 << 30)
721 #define DPLL_SYNCLOCK_ENABLE (1 << 29)
722 #define DPLL_VGA_MODE_DIS (1 << 28)
723 #define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
724 #define DPLLB_MODE_LVDS (2 << 26) /* i915 */
725 #define DPLL_MODE_MASK (3 << 26)
726 #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
727 #define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
728 #define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */
729 #define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */
730 #define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
731 #define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
732 #define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
734 #define SRX_INDEX 0x3c4
735 #define SRX_DATA 0x3c5
737 #define SR01_SCREEN_OFF (1<<5)
740 #define PPCR_ON (1<<0)
743 #define DVOB_ON (1<<31)
745 #define DVOC_ON (1<<31)
747 #define LVDS_ON (1<<31)
749 /* Scratch pad debug 0 reg:
751 #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
753 * The i830 generation, in LVDS mode, defines P1 as the bit number set within
754 * this field (only one bit may be set).
756 #define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000
757 #define DPLL_FPA01_P1_POST_DIV_SHIFT 16
758 #define DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15
759 /* i830, required in DVO non-gang */
760 #define PLL_P2_DIVIDE_BY_4 (1 << 23)
761 #define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */
762 #define PLL_REF_INPUT_DREFCLK (0 << 13)
763 #define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */
764 #define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */
765 #define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
766 #define PLL_REF_INPUT_MASK (3 << 13)
767 #define PLL_LOAD_PULSE_PHASE_SHIFT 9
769 # define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9
770 # define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9)
771 # define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9)
772 # define DPLL_FPA1_P1_POST_DIV_SHIFT 0
773 # define DPLL_FPA1_P1_POST_DIV_MASK 0xff
776 * Parallel to Serial Load Pulse phase selection.
777 * Selects the phase for the 10X DPLL clock for the PCIe
778 * digital display port. The range is 4 to 13; 10 or more
779 * is just a flip delay. The default is 6
781 #define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
782 #define DISPLAY_RATE_SELECT_FPA1 (1 << 8)
784 * SDVO multiplier for 945G/GM. Not used on 965.
786 #define SDVO_MULTIPLIER_MASK 0x000000ff
787 #define SDVO_MULTIPLIER_SHIFT_HIRES 4
788 #define SDVO_MULTIPLIER_SHIFT_VGA 0
789 #define _DPLL_A_MD 0x0601c /* 965+ only */
791 * UDI pixel divider, controlling how many pixels are stuffed into a packet.
793 * Value is pixels minus 1. Must be set to 1 pixel for SDVO.
795 #define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000
796 #define DPLL_MD_UDI_DIVIDER_SHIFT 24
797 /* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
798 #define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000
799 #define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16
801 * SDVO/UDI pixel multiplier.
803 * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
804 * clock rate is 10 times the DPLL clock. At low resolution/refresh rate
805 * modes, the bus rate would be below the limits, so SDVO allows for stuffing
806 * dummy bytes in the datastream at an increased clock rate, with both sides of
807 * the link knowing how many bytes are fill.
809 * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
810 * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be
811 * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
812 * through an SDVO command.
814 * This register field has values of multiplication factor minus 1, with
815 * a maximum multiplier of 5 for SDVO.
817 #define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00
818 #define DPLL_MD_UDI_MULTIPLIER_SHIFT 8
820 * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
821 * This best be set to the default value (3) or the CRT won't work. No,
822 * I don't entirely understand what this does...
824 #define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f
825 #define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
826 #define _DPLL_B_MD 0x06020 /* 965+ only */
827 #define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD)
828 #define _FPA0 0x06040
829 #define _FPA1 0x06044
830 #define _FPB0 0x06048
831 #define _FPB1 0x0604c
832 #define FP0(pipe) _PIPE(pipe, _FPA0, _FPB0)
833 #define FP1(pipe) _PIPE(pipe, _FPA1, _FPB1)
834 #define FP_N_DIV_MASK 0x003f0000
835 #define FP_N_PINEVIEW_DIV_MASK 0x00ff0000
836 #define FP_N_DIV_SHIFT 16
837 #define FP_M1_DIV_MASK 0x00003f00
838 #define FP_M1_DIV_SHIFT 8
839 #define FP_M2_DIV_MASK 0x0000003f
840 #define FP_M2_PINEVIEW_DIV_MASK 0x000000ff
841 #define FP_M2_DIV_SHIFT 0
842 #define DPLL_TEST 0x606c
843 #define DPLLB_TEST_SDVO_DIV_1 (0 << 22)
844 #define DPLLB_TEST_SDVO_DIV_2 (1 << 22)
845 #define DPLLB_TEST_SDVO_DIV_4 (2 << 22)
846 #define DPLLB_TEST_SDVO_DIV_MASK (3 << 22)
847 #define DPLLB_TEST_N_BYPASS (1 << 19)
848 #define DPLLB_TEST_M_BYPASS (1 << 18)
849 #define DPLLB_INPUT_BUFFER_ENABLE (1 << 16)
850 #define DPLLA_TEST_N_BYPASS (1 << 3)
851 #define DPLLA_TEST_M_BYPASS (1 << 2)
852 #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
853 #define D_STATE 0x6104
854 #define DSTATE_GFX_RESET_I830 (1<<6)
855 #define DSTATE_PLL_D3_OFF (1<<3)
856 #define DSTATE_GFX_CLOCK_GATING (1<<1)
857 #define DSTATE_DOT_CLOCK_GATING (1<<0)
858 #define DSPCLK_GATE_D 0x6200
859 # define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */
860 # define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */
861 # define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */
862 # define VRDUNIT_CLOCK_GATE_DISABLE (1 << 27) /* 965 */
863 # define AUDUNIT_CLOCK_GATE_DISABLE (1 << 26) /* 965 */
864 # define DPUNIT_A_CLOCK_GATE_DISABLE (1 << 25) /* 965 */
865 # define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) /* 965 */
866 # define TVRUNIT_CLOCK_GATE_DISABLE (1 << 23) /* 915-945 */
867 # define TVCUNIT_CLOCK_GATE_DISABLE (1 << 22) /* 915-945 */
868 # define TVFUNIT_CLOCK_GATE_DISABLE (1 << 21) /* 915-945 */
869 # define TVEUNIT_CLOCK_GATE_DISABLE (1 << 20) /* 915-945 */
870 # define DVSUNIT_CLOCK_GATE_DISABLE (1 << 19) /* 915-945 */
871 # define DSSUNIT_CLOCK_GATE_DISABLE (1 << 18) /* 915-945 */
872 # define DDBUNIT_CLOCK_GATE_DISABLE (1 << 17) /* 915-945 */
873 # define DPRUNIT_CLOCK_GATE_DISABLE (1 << 16) /* 915-945 */
874 # define DPFUNIT_CLOCK_GATE_DISABLE (1 << 15) /* 915-945 */
875 # define DPBMUNIT_CLOCK_GATE_DISABLE (1 << 14) /* 915-945 */
876 # define DPLSUNIT_CLOCK_GATE_DISABLE (1 << 13) /* 915-945 */
877 # define DPLUNIT_CLOCK_GATE_DISABLE (1 << 12) /* 915-945 */
878 # define DPOUNIT_CLOCK_GATE_DISABLE (1 << 11)
879 # define DPBUNIT_CLOCK_GATE_DISABLE (1 << 10)
880 # define DCUNIT_CLOCK_GATE_DISABLE (1 << 9)
881 # define DPUNIT_CLOCK_GATE_DISABLE (1 << 8)
882 # define VRUNIT_CLOCK_GATE_DISABLE (1 << 7) /* 915+: reserved */
883 # define OVHUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 830-865 */
884 # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */
885 # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5)
886 # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4)
888 * This bit must be set on the 830 to prevent hangs when turning off the
891 # define OVRUNIT_CLOCK_GATE_DISABLE (1 << 3)
892 # define OVCUNIT_CLOCK_GATE_DISABLE (1 << 2)
893 # define OVUUNIT_CLOCK_GATE_DISABLE (1 << 1)
894 # define ZVUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 830 */
895 # define OVLUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 845,865 */
897 #define RENCLK_GATE_D1 0x6204
898 # define BLITTER_CLOCK_GATE_DISABLE (1 << 13) /* 945GM only */
899 # define MPEG_CLOCK_GATE_DISABLE (1 << 12) /* 945GM only */
900 # define PC_FE_CLOCK_GATE_DISABLE (1 << 11)
901 # define PC_BE_CLOCK_GATE_DISABLE (1 << 10)
902 # define WINDOWER_CLOCK_GATE_DISABLE (1 << 9)
903 # define INTERPOLATOR_CLOCK_GATE_DISABLE (1 << 8)
904 # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7)
905 # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6)
906 # define MAG_CLOCK_GATE_DISABLE (1 << 5)
907 /** This bit must be unset on 855,865 */
908 # define MECI_CLOCK_GATE_DISABLE (1 << 4)
909 # define DCMP_CLOCK_GATE_DISABLE (1 << 3)
910 # define MEC_CLOCK_GATE_DISABLE (1 << 2)
911 # define MECO_CLOCK_GATE_DISABLE (1 << 1)
912 /** This bit must be set on 855,865. */
913 # define SV_CLOCK_GATE_DISABLE (1 << 0)
914 # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16)
915 # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15)
916 # define I915_MOTION_COMP_CLOCK_GATE_DISABLE (1 << 14)
917 # define I915_BD_BF_CLOCK_GATE_DISABLE (1 << 13)
918 # define I915_SF_SE_CLOCK_GATE_DISABLE (1 << 12)
919 # define I915_WM_CLOCK_GATE_DISABLE (1 << 11)
920 # define I915_IZ_CLOCK_GATE_DISABLE (1 << 10)
921 # define I915_PI_CLOCK_GATE_DISABLE (1 << 9)
922 # define I915_DI_CLOCK_GATE_DISABLE (1 << 8)
923 # define I915_SH_SV_CLOCK_GATE_DISABLE (1 << 7)
924 # define I915_PL_DG_QC_FT_CLOCK_GATE_DISABLE (1 << 6)
925 # define I915_SC_CLOCK_GATE_DISABLE (1 << 5)
926 # define I915_FL_CLOCK_GATE_DISABLE (1 << 4)
927 # define I915_DM_CLOCK_GATE_DISABLE (1 << 3)
928 # define I915_PS_CLOCK_GATE_DISABLE (1 << 2)
929 # define I915_CC_CLOCK_GATE_DISABLE (1 << 1)
930 # define I915_BY_CLOCK_GATE_DISABLE (1 << 0)
932 # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30)
933 /** This bit must always be set on 965G/965GM */
934 # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29)
935 # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28)
936 # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27)
937 # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26)
938 # define I965_GW_CLOCK_GATE_DISABLE (1 << 25)
939 # define I965_TD_CLOCK_GATE_DISABLE (1 << 24)
940 /** This bit must always be set on 965G */
941 # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23)
942 # define I965_IC_CLOCK_GATE_DISABLE (1 << 22)
943 # define I965_EU_CLOCK_GATE_DISABLE (1 << 21)
944 # define I965_IF_CLOCK_GATE_DISABLE (1 << 20)
945 # define I965_TC_CLOCK_GATE_DISABLE (1 << 19)
946 # define I965_SO_CLOCK_GATE_DISABLE (1 << 17)
947 # define I965_FBC_CLOCK_GATE_DISABLE (1 << 16)
948 # define I965_MARI_CLOCK_GATE_DISABLE (1 << 15)
949 # define I965_MASF_CLOCK_GATE_DISABLE (1 << 14)
950 # define I965_MAWB_CLOCK_GATE_DISABLE (1 << 13)
951 # define I965_EM_CLOCK_GATE_DISABLE (1 << 12)
952 # define I965_UC_CLOCK_GATE_DISABLE (1 << 11)
953 # define I965_SI_CLOCK_GATE_DISABLE (1 << 6)
954 # define I965_MT_CLOCK_GATE_DISABLE (1 << 5)
955 # define I965_PL_CLOCK_GATE_DISABLE (1 << 4)
956 # define I965_DG_CLOCK_GATE_DISABLE (1 << 3)
957 # define I965_QC_CLOCK_GATE_DISABLE (1 << 2)
958 # define I965_FT_CLOCK_GATE_DISABLE (1 << 1)
959 # define I965_DM_CLOCK_GATE_DISABLE (1 << 0)
961 #define RENCLK_GATE_D2 0x6208
962 #define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9)
963 #define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7)
964 #define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6)
965 #define RAMCLK_GATE_D 0x6210 /* CRL only */
966 #define DEUC 0x6214 /* CRL only */
972 #define _PALETTE_A 0x0a000
973 #define _PALETTE_B 0x0a800
974 #define PALETTE(pipe) _PIPE(pipe, _PALETTE_A, _PALETTE_B)
981 * This mirrors the MCHBAR MMIO space whose location is determined by
982 * device 0 function 0's pci config register 0x44 or 0x48 and matches it in
983 * every way. It is not accessible from the CP register read instructions.
986 #define MCHBAR_MIRROR_BASE 0x10000
988 #define MCHBAR_MIRROR_BASE_SNB 0x140000
990 /** 915-945 and GM965 MCH register controlling DRAM channel access */
992 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0)
993 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0)
994 #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0)
995 #define DCC_ADDRESSING_MODE_MASK (3 << 0)
996 #define DCC_CHANNEL_XOR_DISABLE (1 << 10)
997 #define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
999 /** Pineview MCH register contains DDR3 setting */
1000 #define CSHRDDR3CTL 0x101a8
1001 #define CSHRDDR3CTL_DDR3 (1 << 2)
1003 /** 965 MCH register controlling DRAM channel configuration */
1004 #define C0DRB3 0x10206
1005 #define C1DRB3 0x10606
1007 /* Clocking configuration register */
1008 #define CLKCFG 0x10c00
1009 #define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */
1010 #define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */
1011 #define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */
1012 #define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */
1013 #define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */
1014 #define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */
1015 /* Note, below two are guess */
1016 #define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */
1017 #define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */
1018 #define CLKCFG_FSB_MASK (7 << 0)
1019 #define CLKCFG_MEM_533 (1 << 4)
1020 #define CLKCFG_MEM_667 (2 << 4)
1021 #define CLKCFG_MEM_800 (3 << 4)
1022 #define CLKCFG_MEM_MASK (7 << 4)
1024 #define TSC1 0x11001
1027 #define TSFS 0x11020
1028 #define TSFS_SLOPE_MASK 0x0000ff00
1029 #define TSFS_SLOPE_SHIFT 8
1030 #define TSFS_INTR_MASK 0x000000ff
1032 #define CRSTANDVID 0x11100
1033 #define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */
1034 #define PXVFREQ_PX_MASK 0x7f000000
1035 #define PXVFREQ_PX_SHIFT 24
1036 #define VIDFREQ_BASE 0x11110
1037 #define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */
1038 #define VIDFREQ2 0x11114
1039 #define VIDFREQ3 0x11118
1040 #define VIDFREQ4 0x1111c
1041 #define VIDFREQ_P0_MASK 0x1f000000
1042 #define VIDFREQ_P0_SHIFT 24
1043 #define VIDFREQ_P0_CSCLK_MASK 0x00f00000
1044 #define VIDFREQ_P0_CSCLK_SHIFT 20
1045 #define VIDFREQ_P0_CRCLK_MASK 0x000f0000
1046 #define VIDFREQ_P0_CRCLK_SHIFT 16
1047 #define VIDFREQ_P1_MASK 0x00001f00
1048 #define VIDFREQ_P1_SHIFT 8
1049 #define VIDFREQ_P1_CSCLK_MASK 0x000000f0
1050 #define VIDFREQ_P1_CSCLK_SHIFT 4
1051 #define VIDFREQ_P1_CRCLK_MASK 0x0000000f
1052 #define INTTOEXT_BASE_ILK 0x11300
1053 #define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */
1054 #define INTTOEXT_MAP3_SHIFT 24
1055 #define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT)
1056 #define INTTOEXT_MAP2_SHIFT 16
1057 #define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT)
1058 #define INTTOEXT_MAP1_SHIFT 8
1059 #define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT)
1060 #define INTTOEXT_MAP0_SHIFT 0
1061 #define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT)
1062 #define MEMSWCTL 0x11170 /* Ironlake only */
1063 #define MEMCTL_CMD_MASK 0xe000
1064 #define MEMCTL_CMD_SHIFT 13
1065 #define MEMCTL_CMD_RCLK_OFF 0
1066 #define MEMCTL_CMD_RCLK_ON 1
1067 #define MEMCTL_CMD_CHFREQ 2
1068 #define MEMCTL_CMD_CHVID 3
1069 #define MEMCTL_CMD_VMMOFF 4
1070 #define MEMCTL_CMD_VMMON 5
1071 #define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears
1072 when command complete */
1073 #define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */
1074 #define MEMCTL_FREQ_SHIFT 8
1075 #define MEMCTL_SFCAVM (1<<7)
1076 #define MEMCTL_TGT_VID_MASK 0x007f
1077 #define MEMIHYST 0x1117c
1078 #define MEMINTREN 0x11180 /* 16 bits */
1079 #define MEMINT_RSEXIT_EN (1<<8)
1080 #define MEMINT_CX_SUPR_EN (1<<7)
1081 #define MEMINT_CONT_BUSY_EN (1<<6)
1082 #define MEMINT_AVG_BUSY_EN (1<<5)
1083 #define MEMINT_EVAL_CHG_EN (1<<4)
1084 #define MEMINT_MON_IDLE_EN (1<<3)
1085 #define MEMINT_UP_EVAL_EN (1<<2)
1086 #define MEMINT_DOWN_EVAL_EN (1<<1)
1087 #define MEMINT_SW_CMD_EN (1<<0)
1088 #define MEMINTRSTR 0x11182 /* 16 bits */
1089 #define MEM_RSEXIT_MASK 0xc000
1090 #define MEM_RSEXIT_SHIFT 14
1091 #define MEM_CONT_BUSY_MASK 0x3000
1092 #define MEM_CONT_BUSY_SHIFT 12
1093 #define MEM_AVG_BUSY_MASK 0x0c00
1094 #define MEM_AVG_BUSY_SHIFT 10
1095 #define MEM_EVAL_CHG_MASK 0x0300
1096 #define MEM_EVAL_BUSY_SHIFT 8
1097 #define MEM_MON_IDLE_MASK 0x00c0
1098 #define MEM_MON_IDLE_SHIFT 6
1099 #define MEM_UP_EVAL_MASK 0x0030
1100 #define MEM_UP_EVAL_SHIFT 4
1101 #define MEM_DOWN_EVAL_MASK 0x000c
1102 #define MEM_DOWN_EVAL_SHIFT 2
1103 #define MEM_SW_CMD_MASK 0x0003
1104 #define MEM_INT_STEER_GFX 0
1105 #define MEM_INT_STEER_CMR 1
1106 #define MEM_INT_STEER_SMI 2
1107 #define MEM_INT_STEER_SCI 3
1108 #define MEMINTRSTS 0x11184
1109 #define MEMINT_RSEXIT (1<<7)
1110 #define MEMINT_CONT_BUSY (1<<6)
1111 #define MEMINT_AVG_BUSY (1<<5)
1112 #define MEMINT_EVAL_CHG (1<<4)
1113 #define MEMINT_MON_IDLE (1<<3)
1114 #define MEMINT_UP_EVAL (1<<2)
1115 #define MEMINT_DOWN_EVAL (1<<1)
1116 #define MEMINT_SW_CMD (1<<0)
1117 #define MEMMODECTL 0x11190
1118 #define MEMMODE_BOOST_EN (1<<31)
1119 #define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */
1120 #define MEMMODE_BOOST_FREQ_SHIFT 24
1121 #define MEMMODE_IDLE_MODE_MASK 0x00030000
1122 #define MEMMODE_IDLE_MODE_SHIFT 16
1123 #define MEMMODE_IDLE_MODE_EVAL 0
1124 #define MEMMODE_IDLE_MODE_CONT 1
1125 #define MEMMODE_HWIDLE_EN (1<<15)
1126 #define MEMMODE_SWMODE_EN (1<<14)
1127 #define MEMMODE_RCLK_GATE (1<<13)
1128 #define MEMMODE_HW_UPDATE (1<<12)
1129 #define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */
1130 #define MEMMODE_FSTART_SHIFT 8
1131 #define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */
1132 #define MEMMODE_FMAX_SHIFT 4
1133 #define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */
1134 #define RCBMAXAVG 0x1119c
1135 #define MEMSWCTL2 0x1119e /* Cantiga only */
1136 #define SWMEMCMD_RENDER_OFF (0 << 13)
1137 #define SWMEMCMD_RENDER_ON (1 << 13)
1138 #define SWMEMCMD_SWFREQ (2 << 13)
1139 #define SWMEMCMD_TARVID (3 << 13)
1140 #define SWMEMCMD_VRM_OFF (4 << 13)
1141 #define SWMEMCMD_VRM_ON (5 << 13)
1142 #define CMDSTS (1<<12)
1143 #define SFCAVM (1<<11)
1144 #define SWFREQ_MASK 0x0380 /* P0-7 */
1145 #define SWFREQ_SHIFT 7
1146 #define TARVID_MASK 0x001f
1147 #define MEMSTAT_CTG 0x111a0
1148 #define RCBMINAVG 0x111a0
1149 #define RCUPEI 0x111b0
1150 #define RCDNEI 0x111b4
1151 #define RSTDBYCTL 0x111b8
1152 #define RS1EN (1<<31)
1153 #define RS2EN (1<<30)
1154 #define RS3EN (1<<29)
1155 #define D3RS3EN (1<<28) /* Display D3 imlies RS3 */
1156 #define SWPROMORSX (1<<27) /* RSx promotion timers ignored */
1157 #define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */
1158 #define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */
1159 #define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */
1160 #define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */
1161 #define RSX_STATUS_MASK (7<<20)
1162 #define RSX_STATUS_ON (0<<20)
1163 #define RSX_STATUS_RC1 (1<<20)
1164 #define RSX_STATUS_RC1E (2<<20)
1165 #define RSX_STATUS_RS1 (3<<20)
1166 #define RSX_STATUS_RS2 (4<<20) /* aka rc6 */
1167 #define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */
1168 #define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */
1169 #define RSX_STATUS_RSVD2 (7<<20)
1170 #define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */
1171 #define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */
1172 #define JRSC (1<<17) /* rsx coupled to cpu c-state */
1173 #define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */
1174 #define RS1CONTSAV_MASK (3<<14)
1175 #define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */
1176 #define RS1CONTSAV_RSVD (1<<14)
1177 #define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */
1178 #define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */
1179 #define NORMSLEXLAT_MASK (3<<12)
1180 #define SLOW_RS123 (0<<12)
1181 #define SLOW_RS23 (1<<12)
1182 #define SLOW_RS3 (2<<12)
1183 #define NORMAL_RS123 (3<<12)
1184 #define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */
1185 #define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */
1186 #define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */
1187 #define STATELOCK (1<<7) /* locked to rs_cstate if 0 */
1188 #define RS_CSTATE_MASK (3<<4)
1189 #define RS_CSTATE_C367_RS1 (0<<4)
1190 #define RS_CSTATE_C36_RS1_C7_RS2 (1<<4)
1191 #define RS_CSTATE_RSVD (2<<4)
1192 #define RS_CSTATE_C367_RS2 (3<<4)
1193 #define REDSAVES (1<<3) /* no context save if was idle during rs0 */
1194 #define REDRESTORES (1<<2) /* no restore if was idle during rs0 */
1195 #define VIDCTL 0x111c0
1196 #define VIDSTS 0x111c8
1197 #define VIDSTART 0x111cc /* 8 bits */
1198 #define MEMSTAT_ILK 0x111f8
1199 #define MEMSTAT_VID_MASK 0x7f00
1200 #define MEMSTAT_VID_SHIFT 8
1201 #define MEMSTAT_PSTATE_MASK 0x00f8
1202 #define MEMSTAT_PSTATE_SHIFT 3
1203 #define MEMSTAT_MON_ACTV (1<<2)
1204 #define MEMSTAT_SRC_CTL_MASK 0x0003
1205 #define MEMSTAT_SRC_CTL_CORE 0
1206 #define MEMSTAT_SRC_CTL_TRB 1
1207 #define MEMSTAT_SRC_CTL_THM 2
1208 #define MEMSTAT_SRC_CTL_STDBY 3
1209 #define RCPREVBSYTUPAVG 0x113b8
1210 #define RCPREVBSYTDNAVG 0x113bc
1211 #define PMMISC 0x11214
1212 #define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */
1213 #define SDEW 0x1124c
1214 #define CSIEW0 0x11250
1215 #define CSIEW1 0x11254
1216 #define CSIEW2 0x11258
1219 #define MCHAFE 0x112c0
1220 #define CSIEC 0x112e0
1221 #define DMIEC 0x112e4
1222 #define DDREC 0x112e8
1223 #define PEG0EC 0x112ec
1224 #define PEG1EC 0x112f0
1225 #define GFXEC 0x112f4
1226 #define RPPREVBSYTUPAVG 0x113b8
1227 #define RPPREVBSYTDNAVG 0x113bc
1229 #define ECR_GPFE (1<<31)
1230 #define ECR_IMONE (1<<30)
1231 #define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */
1232 #define OGW0 0x11608
1233 #define OGW1 0x1160c
1243 #define PXWL 0x11680
1244 #define LCFUSE02 0x116c0
1245 #define LCFUSE_HIV_MASK 0x000000ff
1246 #define CSIPLL0 0x12c10
1247 #define DDRMPLL1 0X12c20
1248 #define PEG_BAND_GAP_DATA 0x14d68
1250 #define GEN6_GT_PERF_STATUS 0x145948
1251 #define GEN6_RP_STATE_LIMITS 0x145994
1252 #define GEN6_RP_STATE_CAP 0x145998
1255 * Logical Context regs
1258 #define CCID_EN (1<<0)
1263 #define OVADD 0x30000
1264 #define DOVSTA 0x30008
1265 #define OC_BUF (0x3<<20)
1266 #define OGAMC5 0x30010
1267 #define OGAMC4 0x30014
1268 #define OGAMC3 0x30018
1269 #define OGAMC2 0x3001c
1270 #define OGAMC1 0x30020
1271 #define OGAMC0 0x30024
1274 * Display engine regs
1277 /* Pipe A timing regs */
1278 #define _HTOTAL_A 0x60000
1279 #define _HBLANK_A 0x60004
1280 #define _HSYNC_A 0x60008
1281 #define _VTOTAL_A 0x6000c
1282 #define _VBLANK_A 0x60010
1283 #define _VSYNC_A 0x60014
1284 #define _PIPEASRC 0x6001c
1285 #define _BCLRPAT_A 0x60020
1287 /* Pipe B timing regs */
1288 #define _HTOTAL_B 0x61000
1289 #define _HBLANK_B 0x61004
1290 #define _HSYNC_B 0x61008
1291 #define _VTOTAL_B 0x6100c
1292 #define _VBLANK_B 0x61010
1293 #define _VSYNC_B 0x61014
1294 #define _PIPEBSRC 0x6101c
1295 #define _BCLRPAT_B 0x61020
1297 #define HTOTAL(pipe) _PIPE(pipe, _HTOTAL_A, _HTOTAL_B)
1298 #define HBLANK(pipe) _PIPE(pipe, _HBLANK_A, _HBLANK_B)
1299 #define HSYNC(pipe) _PIPE(pipe, _HSYNC_A, _HSYNC_B)
1300 #define VTOTAL(pipe) _PIPE(pipe, _VTOTAL_A, _VTOTAL_B)
1301 #define VBLANK(pipe) _PIPE(pipe, _VBLANK_A, _VBLANK_B)
1302 #define VSYNC(pipe) _PIPE(pipe, _VSYNC_A, _VSYNC_B)
1303 #define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B)
1305 /* VGA port control */
1306 #define ADPA 0x61100
1307 #define ADPA_DAC_ENABLE (1<<31)
1308 #define ADPA_DAC_DISABLE 0
1309 #define ADPA_PIPE_SELECT_MASK (1<<30)
1310 #define ADPA_PIPE_A_SELECT 0
1311 #define ADPA_PIPE_B_SELECT (1<<30)
1312 #define ADPA_USE_VGA_HVPOLARITY (1<<15)
1313 #define ADPA_SETS_HVPOLARITY 0
1314 #define ADPA_VSYNC_CNTL_DISABLE (1<<11)
1315 #define ADPA_VSYNC_CNTL_ENABLE 0
1316 #define ADPA_HSYNC_CNTL_DISABLE (1<<10)
1317 #define ADPA_HSYNC_CNTL_ENABLE 0
1318 #define ADPA_VSYNC_ACTIVE_HIGH (1<<4)
1319 #define ADPA_VSYNC_ACTIVE_LOW 0
1320 #define ADPA_HSYNC_ACTIVE_HIGH (1<<3)
1321 #define ADPA_HSYNC_ACTIVE_LOW 0
1322 #define ADPA_DPMS_MASK (~(3<<10))
1323 #define ADPA_DPMS_ON (0<<10)
1324 #define ADPA_DPMS_SUSPEND (1<<10)
1325 #define ADPA_DPMS_STANDBY (2<<10)
1326 #define ADPA_DPMS_OFF (3<<10)
1329 /* Hotplug control (945+ only) */
1330 #define PORT_HOTPLUG_EN 0x61110
1331 #define HDMIB_HOTPLUG_INT_EN (1 << 29)
1332 #define DPB_HOTPLUG_INT_EN (1 << 29)
1333 #define HDMIC_HOTPLUG_INT_EN (1 << 28)
1334 #define DPC_HOTPLUG_INT_EN (1 << 28)
1335 #define HDMID_HOTPLUG_INT_EN (1 << 27)
1336 #define DPD_HOTPLUG_INT_EN (1 << 27)
1337 #define SDVOB_HOTPLUG_INT_EN (1 << 26)
1338 #define SDVOC_HOTPLUG_INT_EN (1 << 25)
1339 #define TV_HOTPLUG_INT_EN (1 << 18)
1340 #define CRT_HOTPLUG_INT_EN (1 << 9)
1341 #define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
1342 #define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
1343 /* must use period 64 on GM45 according to docs */
1344 #define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8)
1345 #define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7)
1346 #define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7)
1347 #define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5)
1348 #define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5)
1349 #define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5)
1350 #define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5)
1351 #define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5)
1352 #define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4)
1353 #define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4)
1354 #define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2)
1355 #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
1357 #define PORT_HOTPLUG_STAT 0x61114
1358 #define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
1359 #define DPB_HOTPLUG_INT_STATUS (1 << 29)
1360 #define HDMIC_HOTPLUG_INT_STATUS (1 << 28)
1361 #define DPC_HOTPLUG_INT_STATUS (1 << 28)
1362 #define HDMID_HOTPLUG_INT_STATUS (1 << 27)
1363 #define DPD_HOTPLUG_INT_STATUS (1 << 27)
1364 #define CRT_HOTPLUG_INT_STATUS (1 << 11)
1365 #define TV_HOTPLUG_INT_STATUS (1 << 10)
1366 #define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
1367 #define CRT_HOTPLUG_MONITOR_COLOR (3 << 8)
1368 #define CRT_HOTPLUG_MONITOR_MONO (2 << 8)
1369 #define CRT_HOTPLUG_MONITOR_NONE (0 << 8)
1370 #define SDVOC_HOTPLUG_INT_STATUS (1 << 7)
1371 #define SDVOB_HOTPLUG_INT_STATUS (1 << 6)
1373 /* SDVO port control */
1374 #define SDVOB 0x61140
1375 #define SDVOC 0x61160
1376 #define SDVO_ENABLE (1 << 31)
1377 #define SDVO_PIPE_B_SELECT (1 << 30)
1378 #define SDVO_STALL_SELECT (1 << 29)
1379 #define SDVO_INTERRUPT_ENABLE (1 << 26)
1381 * 915G/GM SDVO pixel multiplier.
1383 * Programmed value is multiplier - 1, up to 5x.
1385 * \sa DPLL_MD_UDI_MULTIPLIER_MASK
1387 #define SDVO_PORT_MULTIPLY_MASK (7 << 23)
1388 #define SDVO_PORT_MULTIPLY_SHIFT 23
1389 #define SDVO_PHASE_SELECT_MASK (15 << 19)
1390 #define SDVO_PHASE_SELECT_DEFAULT (6 << 19)
1391 #define SDVO_CLOCK_OUTPUT_INVERT (1 << 18)
1392 #define SDVOC_GANG_MODE (1 << 16)
1393 #define SDVO_ENCODING_SDVO (0x0 << 10)
1394 #define SDVO_ENCODING_HDMI (0x2 << 10)
1395 /** Requird for HDMI operation */
1396 #define SDVO_NULL_PACKETS_DURING_VSYNC (1 << 9)
1397 #define SDVO_COLOR_RANGE_16_235 (1 << 8)
1398 #define SDVO_BORDER_ENABLE (1 << 7)
1399 #define SDVO_AUDIO_ENABLE (1 << 6)
1400 /** New with 965, default is to be set */
1401 #define SDVO_VSYNC_ACTIVE_HIGH (1 << 4)
1402 /** New with 965, default is to be set */
1403 #define SDVO_HSYNC_ACTIVE_HIGH (1 << 3)
1404 #define SDVOB_PCIE_CONCURRENCY (1 << 3)
1405 #define SDVO_DETECTED (1 << 2)
1406 /* Bits to be preserved when writing */
1407 #define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
1408 #define SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
1410 /* DVO port control */
1411 #define DVOA 0x61120
1412 #define DVOB 0x61140
1413 #define DVOC 0x61160
1414 #define DVO_ENABLE (1 << 31)
1415 #define DVO_PIPE_B_SELECT (1 << 30)
1416 #define DVO_PIPE_STALL_UNUSED (0 << 28)
1417 #define DVO_PIPE_STALL (1 << 28)
1418 #define DVO_PIPE_STALL_TV (2 << 28)
1419 #define DVO_PIPE_STALL_MASK (3 << 28)
1420 #define DVO_USE_VGA_SYNC (1 << 15)
1421 #define DVO_DATA_ORDER_I740 (0 << 14)
1422 #define DVO_DATA_ORDER_FP (1 << 14)
1423 #define DVO_VSYNC_DISABLE (1 << 11)
1424 #define DVO_HSYNC_DISABLE (1 << 10)
1425 #define DVO_VSYNC_TRISTATE (1 << 9)
1426 #define DVO_HSYNC_TRISTATE (1 << 8)
1427 #define DVO_BORDER_ENABLE (1 << 7)
1428 #define DVO_DATA_ORDER_GBRG (1 << 6)
1429 #define DVO_DATA_ORDER_RGGB (0 << 6)
1430 #define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6)
1431 #define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6)
1432 #define DVO_VSYNC_ACTIVE_HIGH (1 << 4)
1433 #define DVO_HSYNC_ACTIVE_HIGH (1 << 3)
1434 #define DVO_BLANK_ACTIVE_HIGH (1 << 2)
1435 #define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */
1436 #define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */
1437 #define DVO_PRESERVE_MASK (0x7<<24)
1438 #define DVOA_SRCDIM 0x61124
1439 #define DVOB_SRCDIM 0x61144
1440 #define DVOC_SRCDIM 0x61164
1441 #define DVO_SRCDIM_HORIZONTAL_SHIFT 12
1442 #define DVO_SRCDIM_VERTICAL_SHIFT 0
1444 /* LVDS port control */
1445 #define LVDS 0x61180
1447 * Enables the LVDS port. This bit must be set before DPLLs are enabled, as
1448 * the DPLL semantics change when the LVDS is assigned to that pipe.
1450 #define LVDS_PORT_EN (1 << 31)
1451 /* Selects pipe B for LVDS data. Must be set on pre-965. */
1452 #define LVDS_PIPEB_SELECT (1 << 30)
1453 #define LVDS_PIPE_MASK (1 << 30)
1454 /* LVDS dithering flag on 965/g4x platform */
1455 #define LVDS_ENABLE_DITHER (1 << 25)
1456 /* LVDS sync polarity flags. Set to invert (i.e. negative) */
1457 #define LVDS_VSYNC_POLARITY (1 << 21)
1458 #define LVDS_HSYNC_POLARITY (1 << 20)
1460 /* Enable border for unscaled (or aspect-scaled) display */
1461 #define LVDS_BORDER_ENABLE (1 << 15)
1463 * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
1466 #define LVDS_A0A2_CLKA_POWER_MASK (3 << 8)
1467 #define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8)
1468 #define LVDS_A0A2_CLKA_POWER_UP (3 << 8)
1470 * Controls the A3 data pair, which contains the additional LSBs for 24 bit
1471 * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
1474 #define LVDS_A3_POWER_MASK (3 << 6)
1475 #define LVDS_A3_POWER_DOWN (0 << 6)
1476 #define LVDS_A3_POWER_UP (3 << 6)
1478 * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP
1481 #define LVDS_CLKB_POWER_MASK (3 << 4)
1482 #define LVDS_CLKB_POWER_DOWN (0 << 4)
1483 #define LVDS_CLKB_POWER_UP (3 << 4)
1485 * Controls the B0-B3 data pairs. This must be set to match the DPLL p2
1486 * setting for whether we are in dual-channel mode. The B3 pair will
1487 * additionally only be powered up when LVDS_A3_POWER_UP is set.
1489 #define LVDS_B0B3_POWER_MASK (3 << 2)
1490 #define LVDS_B0B3_POWER_DOWN (0 << 2)
1491 #define LVDS_B0B3_POWER_UP (3 << 2)
1493 #define LVDS_PIPE_ENABLED(V, P) \
1494 (((V) & (LVDS_PIPE_MASK | LVDS_PORT_EN)) == ((P) << 30 | LVDS_PORT_EN))
1496 /* Video Data Island Packet control */
1497 #define VIDEO_DIP_DATA 0x61178
1498 #define VIDEO_DIP_CTL 0x61170
1499 #define VIDEO_DIP_ENABLE (1 << 31)
1500 #define VIDEO_DIP_PORT_B (1 << 29)
1501 #define VIDEO_DIP_PORT_C (2 << 29)
1502 #define VIDEO_DIP_ENABLE_AVI (1 << 21)
1503 #define VIDEO_DIP_ENABLE_VENDOR (2 << 21)
1504 #define VIDEO_DIP_ENABLE_SPD (8 << 21)
1505 #define VIDEO_DIP_SELECT_AVI (0 << 19)
1506 #define VIDEO_DIP_SELECT_VENDOR (1 << 19)
1507 #define VIDEO_DIP_SELECT_SPD (3 << 19)
1508 #define VIDEO_DIP_FREQ_ONCE (0 << 16)
1509 #define VIDEO_DIP_FREQ_VSYNC (1 << 16)
1510 #define VIDEO_DIP_FREQ_2VSYNC (2 << 16)
1512 /* Panel power sequencing */
1513 #define PP_STATUS 0x61200
1514 #define PP_ON (1 << 31)
1516 * Indicates that all dependencies of the panel are on:
1520 * - LVDS/DVOB/DVOC on
1522 #define PP_READY (1 << 30)
1523 #define PP_SEQUENCE_NONE (0 << 28)
1524 #define PP_SEQUENCE_ON (1 << 28)
1525 #define PP_SEQUENCE_OFF (2 << 28)
1526 #define PP_SEQUENCE_MASK 0x30000000
1527 #define PP_CYCLE_DELAY_ACTIVE (1 << 27)
1528 #define PP_SEQUENCE_STATE_ON_IDLE (1 << 3)
1529 #define PP_SEQUENCE_STATE_MASK 0x0000000f
1530 #define PP_CONTROL 0x61204
1531 #define POWER_TARGET_ON (1 << 0)
1532 #define PP_ON_DELAYS 0x61208
1533 #define PP_OFF_DELAYS 0x6120c
1534 #define PP_DIVISOR 0x61210
1537 #define PFIT_CONTROL 0x61230
1538 #define PFIT_ENABLE (1 << 31)
1539 #define PFIT_PIPE_MASK (3 << 29)
1540 #define PFIT_PIPE_SHIFT 29
1541 #define VERT_INTERP_DISABLE (0 << 10)
1542 #define VERT_INTERP_BILINEAR (1 << 10)
1543 #define VERT_INTERP_MASK (3 << 10)
1544 #define VERT_AUTO_SCALE (1 << 9)
1545 #define HORIZ_INTERP_DISABLE (0 << 6)
1546 #define HORIZ_INTERP_BILINEAR (1 << 6)
1547 #define HORIZ_INTERP_MASK (3 << 6)
1548 #define HORIZ_AUTO_SCALE (1 << 5)
1549 #define PANEL_8TO6_DITHER_ENABLE (1 << 3)
1550 #define PFIT_FILTER_FUZZY (0 << 24)
1551 #define PFIT_SCALING_AUTO (0 << 26)
1552 #define PFIT_SCALING_PROGRAMMED (1 << 26)
1553 #define PFIT_SCALING_PILLAR (2 << 26)
1554 #define PFIT_SCALING_LETTER (3 << 26)
1555 #define PFIT_PGM_RATIOS 0x61234
1556 #define PFIT_VERT_SCALE_MASK 0xfff00000
1557 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0
1559 #define PFIT_VERT_SCALE_SHIFT 20
1560 #define PFIT_VERT_SCALE_MASK 0xfff00000
1561 #define PFIT_HORIZ_SCALE_SHIFT 4
1562 #define PFIT_HORIZ_SCALE_MASK 0x0000fff0
1564 #define PFIT_VERT_SCALE_SHIFT_965 16
1565 #define PFIT_VERT_SCALE_MASK_965 0x1fff0000
1566 #define PFIT_HORIZ_SCALE_SHIFT_965 0
1567 #define PFIT_HORIZ_SCALE_MASK_965 0x00001fff
1569 #define PFIT_AUTO_RATIOS 0x61238
1571 /* Backlight control */
1572 #define BLC_PWM_CTL 0x61254
1573 #define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
1574 #define BLC_PWM_CTL2 0x61250 /* 965+ only */
1575 #define BLM_COMBINATION_MODE (1 << 30)
1577 * This is the most significant 15 bits of the number of backlight cycles in a
1578 * complete cycle of the modulated backlight control.
1580 * The actual value is this field multiplied by two.
1582 #define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
1583 #define BLM_LEGACY_MODE (1 << 16)
1585 * This is the number of cycles out of the backlight modulation cycle for which
1586 * the backlight is on.
1588 * This field must be no greater than the number of cycles in the complete
1589 * backlight modulation cycle.
1591 #define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
1592 #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
1594 #define BLC_HIST_CTL 0x61260
1596 /* TV port control */
1597 #define TV_CTL 0x68000
1598 /** Enables the TV encoder */
1599 # define TV_ENC_ENABLE (1 << 31)
1600 /** Sources the TV encoder input from pipe B instead of A. */
1601 # define TV_ENC_PIPEB_SELECT (1 << 30)
1602 /** Outputs composite video (DAC A only) */
1603 # define TV_ENC_OUTPUT_COMPOSITE (0 << 28)
1604 /** Outputs SVideo video (DAC B/C) */
1605 # define TV_ENC_OUTPUT_SVIDEO (1 << 28)
1606 /** Outputs Component video (DAC A/B/C) */
1607 # define TV_ENC_OUTPUT_COMPONENT (2 << 28)
1608 /** Outputs Composite and SVideo (DAC A/B/C) */
1609 # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28)
1610 # define TV_TRILEVEL_SYNC (1 << 21)
1611 /** Enables slow sync generation (945GM only) */
1612 # define TV_SLOW_SYNC (1 << 20)
1613 /** Selects 4x oversampling for 480i and 576p */
1614 # define TV_OVERSAMPLE_4X (0 << 18)
1615 /** Selects 2x oversampling for 720p and 1080i */
1616 # define TV_OVERSAMPLE_2X (1 << 18)
1617 /** Selects no oversampling for 1080p */
1618 # define TV_OVERSAMPLE_NONE (2 << 18)
1619 /** Selects 8x oversampling */
1620 # define TV_OVERSAMPLE_8X (3 << 18)
1621 /** Selects progressive mode rather than interlaced */
1622 # define TV_PROGRESSIVE (1 << 17)
1623 /** Sets the colorburst to PAL mode. Required for non-M PAL modes. */
1624 # define TV_PAL_BURST (1 << 16)
1625 /** Field for setting delay of Y compared to C */
1626 # define TV_YC_SKEW_MASK (7 << 12)
1627 /** Enables a fix for 480p/576p standard definition modes on the 915GM only */
1628 # define TV_ENC_SDP_FIX (1 << 11)
1630 * Enables a fix for the 915GM only.
1632 * Not sure what it does.
1634 # define TV_ENC_C0_FIX (1 << 10)
1635 /** Bits that must be preserved by software */
1636 # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf)
1637 # define TV_FUSE_STATE_MASK (3 << 4)
1638 /** Read-only state that reports all features enabled */
1639 # define TV_FUSE_STATE_ENABLED (0 << 4)
1640 /** Read-only state that reports that Macrovision is disabled in hardware*/
1641 # define TV_FUSE_STATE_NO_MACROVISION (1 << 4)
1642 /** Read-only state that reports that TV-out is disabled in hardware. */
1643 # define TV_FUSE_STATE_DISABLED (2 << 4)
1644 /** Normal operation */
1645 # define TV_TEST_MODE_NORMAL (0 << 0)
1646 /** Encoder test pattern 1 - combo pattern */
1647 # define TV_TEST_MODE_PATTERN_1 (1 << 0)
1648 /** Encoder test pattern 2 - full screen vertical 75% color bars */
1649 # define TV_TEST_MODE_PATTERN_2 (2 << 0)
1650 /** Encoder test pattern 3 - full screen horizontal 75% color bars */
1651 # define TV_TEST_MODE_PATTERN_3 (3 << 0)
1652 /** Encoder test pattern 4 - random noise */
1653 # define TV_TEST_MODE_PATTERN_4 (4 << 0)
1654 /** Encoder test pattern 5 - linear color ramps */
1655 # define TV_TEST_MODE_PATTERN_5 (5 << 0)
1657 * This test mode forces the DACs to 50% of full output.
1659 * This is used for load detection in combination with TVDAC_SENSE_MASK
1661 # define TV_TEST_MODE_MONITOR_DETECT (7 << 0)
1662 # define TV_TEST_MODE_MASK (7 << 0)
1664 #define TV_DAC 0x68004
1665 # define TV_DAC_SAVE 0x00ffff00
1667 * Reports that DAC state change logic has reported change (RO).
1669 * This gets cleared when TV_DAC_STATE_EN is cleared
1671 # define TVDAC_STATE_CHG (1 << 31)
1672 # define TVDAC_SENSE_MASK (7 << 28)
1673 /** Reports that DAC A voltage is above the detect threshold */
1674 # define TVDAC_A_SENSE (1 << 30)
1675 /** Reports that DAC B voltage is above the detect threshold */
1676 # define TVDAC_B_SENSE (1 << 29)
1677 /** Reports that DAC C voltage is above the detect threshold */
1678 # define TVDAC_C_SENSE (1 << 28)
1680 * Enables DAC state detection logic, for load-based TV detection.
1682 * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
1683 * to off, for load detection to work.
1685 # define TVDAC_STATE_CHG_EN (1 << 27)
1686 /** Sets the DAC A sense value to high */
1687 # define TVDAC_A_SENSE_CTL (1 << 26)
1688 /** Sets the DAC B sense value to high */
1689 # define TVDAC_B_SENSE_CTL (1 << 25)
1690 /** Sets the DAC C sense value to high */
1691 # define TVDAC_C_SENSE_CTL (1 << 24)
1692 /** Overrides the ENC_ENABLE and DAC voltage levels */
1693 # define DAC_CTL_OVERRIDE (1 << 7)
1694 /** Sets the slew rate. Must be preserved in software */
1695 # define ENC_TVDAC_SLEW_FAST (1 << 6)
1696 # define DAC_A_1_3_V (0 << 4)
1697 # define DAC_A_1_1_V (1 << 4)
1698 # define DAC_A_0_7_V (2 << 4)
1699 # define DAC_A_MASK (3 << 4)
1700 # define DAC_B_1_3_V (0 << 2)
1701 # define DAC_B_1_1_V (1 << 2)
1702 # define DAC_B_0_7_V (2 << 2)
1703 # define DAC_B_MASK (3 << 2)
1704 # define DAC_C_1_3_V (0 << 0)
1705 # define DAC_C_1_1_V (1 << 0)
1706 # define DAC_C_0_7_V (2 << 0)
1707 # define DAC_C_MASK (3 << 0)
1710 * CSC coefficients are stored in a floating point format with 9 bits of
1711 * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n,
1712 * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
1713 * -1 (0x3) being the only legal negative value.
1715 #define TV_CSC_Y 0x68010
1716 # define TV_RY_MASK 0x07ff0000
1717 # define TV_RY_SHIFT 16
1718 # define TV_GY_MASK 0x00000fff
1719 # define TV_GY_SHIFT 0
1721 #define TV_CSC_Y2 0x68014
1722 # define TV_BY_MASK 0x07ff0000
1723 # define TV_BY_SHIFT 16
1725 * Y attenuation for component video.
1727 * Stored in 1.9 fixed point.
1729 # define TV_AY_MASK 0x000003ff
1730 # define TV_AY_SHIFT 0
1732 #define TV_CSC_U 0x68018
1733 # define TV_RU_MASK 0x07ff0000
1734 # define TV_RU_SHIFT 16
1735 # define TV_GU_MASK 0x000007ff
1736 # define TV_GU_SHIFT 0
1738 #define TV_CSC_U2 0x6801c
1739 # define TV_BU_MASK 0x07ff0000
1740 # define TV_BU_SHIFT 16
1742 * U attenuation for component video.
1744 * Stored in 1.9 fixed point.
1746 # define TV_AU_MASK 0x000003ff
1747 # define TV_AU_SHIFT 0
1749 #define TV_CSC_V 0x68020
1750 # define TV_RV_MASK 0x0fff0000
1751 # define TV_RV_SHIFT 16
1752 # define TV_GV_MASK 0x000007ff
1753 # define TV_GV_SHIFT 0
1755 #define TV_CSC_V2 0x68024
1756 # define TV_BV_MASK 0x07ff0000
1757 # define TV_BV_SHIFT 16
1759 * V attenuation for component video.
1761 * Stored in 1.9 fixed point.
1763 # define TV_AV_MASK 0x000007ff
1764 # define TV_AV_SHIFT 0
1766 #define TV_CLR_KNOBS 0x68028
1767 /** 2s-complement brightness adjustment */
1768 # define TV_BRIGHTNESS_MASK 0xff000000
1769 # define TV_BRIGHTNESS_SHIFT 24
1770 /** Contrast adjustment, as a 2.6 unsigned floating point number */
1771 # define TV_CONTRAST_MASK 0x00ff0000
1772 # define TV_CONTRAST_SHIFT 16
1773 /** Saturation adjustment, as a 2.6 unsigned floating point number */
1774 # define TV_SATURATION_MASK 0x0000ff00
1775 # define TV_SATURATION_SHIFT 8
1776 /** Hue adjustment, as an integer phase angle in degrees */
1777 # define TV_HUE_MASK 0x000000ff
1778 # define TV_HUE_SHIFT 0
1780 #define TV_CLR_LEVEL 0x6802c
1781 /** Controls the DAC level for black */
1782 # define TV_BLACK_LEVEL_MASK 0x01ff0000
1783 # define TV_BLACK_LEVEL_SHIFT 16
1784 /** Controls the DAC level for blanking */
1785 # define TV_BLANK_LEVEL_MASK 0x000001ff
1786 # define TV_BLANK_LEVEL_SHIFT 0
1788 #define TV_H_CTL_1 0x68030
1789 /** Number of pixels in the hsync. */
1790 # define TV_HSYNC_END_MASK 0x1fff0000
1791 # define TV_HSYNC_END_SHIFT 16
1792 /** Total number of pixels minus one in the line (display and blanking). */
1793 # define TV_HTOTAL_MASK 0x00001fff
1794 # define TV_HTOTAL_SHIFT 0
1796 #define TV_H_CTL_2 0x68034
1797 /** Enables the colorburst (needed for non-component color) */
1798 # define TV_BURST_ENA (1 << 31)
1799 /** Offset of the colorburst from the start of hsync, in pixels minus one. */
1800 # define TV_HBURST_START_SHIFT 16
1801 # define TV_HBURST_START_MASK 0x1fff0000
1802 /** Length of the colorburst */
1803 # define TV_HBURST_LEN_SHIFT 0
1804 # define TV_HBURST_LEN_MASK 0x0001fff
1806 #define TV_H_CTL_3 0x68038
1807 /** End of hblank, measured in pixels minus one from start of hsync */
1808 # define TV_HBLANK_END_SHIFT 16
1809 # define TV_HBLANK_END_MASK 0x1fff0000
1810 /** Start of hblank, measured in pixels minus one from start of hsync */
1811 # define TV_HBLANK_START_SHIFT 0
1812 # define TV_HBLANK_START_MASK 0x0001fff
1814 #define TV_V_CTL_1 0x6803c
1816 # define TV_NBR_END_SHIFT 16
1817 # define TV_NBR_END_MASK 0x07ff0000
1819 # define TV_VI_END_F1_SHIFT 8
1820 # define TV_VI_END_F1_MASK 0x00003f00
1822 # define TV_VI_END_F2_SHIFT 0
1823 # define TV_VI_END_F2_MASK 0x0000003f
1825 #define TV_V_CTL_2 0x68040
1826 /** Length of vsync, in half lines */
1827 # define TV_VSYNC_LEN_MASK 0x07ff0000
1828 # define TV_VSYNC_LEN_SHIFT 16
1829 /** Offset of the start of vsync in field 1, measured in one less than the
1830 * number of half lines.
1832 # define TV_VSYNC_START_F1_MASK 0x00007f00
1833 # define TV_VSYNC_START_F1_SHIFT 8
1835 * Offset of the start of vsync in field 2, measured in one less than the
1836 * number of half lines.
1838 # define TV_VSYNC_START_F2_MASK 0x0000007f
1839 # define TV_VSYNC_START_F2_SHIFT 0
1841 #define TV_V_CTL_3 0x68044
1842 /** Enables generation of the equalization signal */
1843 # define TV_EQUAL_ENA (1 << 31)
1844 /** Length of vsync, in half lines */
1845 # define TV_VEQ_LEN_MASK 0x007f0000
1846 # define TV_VEQ_LEN_SHIFT 16
1847 /** Offset of the start of equalization in field 1, measured in one less than
1848 * the number of half lines.
1850 # define TV_VEQ_START_F1_MASK 0x0007f00
1851 # define TV_VEQ_START_F1_SHIFT 8
1853 * Offset of the start of equalization in field 2, measured in one less than
1854 * the number of half lines.
1856 # define TV_VEQ_START_F2_MASK 0x000007f
1857 # define TV_VEQ_START_F2_SHIFT 0
1859 #define TV_V_CTL_4 0x68048
1861 * Offset to start of vertical colorburst, measured in one less than the
1862 * number of lines from vertical start.
1864 # define TV_VBURST_START_F1_MASK 0x003f0000
1865 # define TV_VBURST_START_F1_SHIFT 16
1867 * Offset to the end of vertical colorburst, measured in one less than the
1868 * number of lines from the start of NBR.
1870 # define TV_VBURST_END_F1_MASK 0x000000ff
1871 # define TV_VBURST_END_F1_SHIFT 0
1873 #define TV_V_CTL_5 0x6804c
1875 * Offset to start of vertical colorburst, measured in one less than the
1876 * number of lines from vertical start.
1878 # define TV_VBURST_START_F2_MASK 0x003f0000
1879 # define TV_VBURST_START_F2_SHIFT 16
1881 * Offset to the end of vertical colorburst, measured in one less than the
1882 * number of lines from the start of NBR.
1884 # define TV_VBURST_END_F2_MASK 0x000000ff
1885 # define TV_VBURST_END_F2_SHIFT 0
1887 #define TV_V_CTL_6 0x68050
1889 * Offset to start of vertical colorburst, measured in one less than the
1890 * number of lines from vertical start.
1892 # define TV_VBURST_START_F3_MASK 0x003f0000
1893 # define TV_VBURST_START_F3_SHIFT 16
1895 * Offset to the end of vertical colorburst, measured in one less than the
1896 * number of lines from the start of NBR.
1898 # define TV_VBURST_END_F3_MASK 0x000000ff
1899 # define TV_VBURST_END_F3_SHIFT 0
1901 #define TV_V_CTL_7 0x68054
1903 * Offset to start of vertical colorburst, measured in one less than the
1904 * number of lines from vertical start.
1906 # define TV_VBURST_START_F4_MASK 0x003f0000
1907 # define TV_VBURST_START_F4_SHIFT 16
1909 * Offset to the end of vertical colorburst, measured in one less than the
1910 * number of lines from the start of NBR.
1912 # define TV_VBURST_END_F4_MASK 0x000000ff
1913 # define TV_VBURST_END_F4_SHIFT 0
1915 #define TV_SC_CTL_1 0x68060
1916 /** Turns on the first subcarrier phase generation DDA */
1917 # define TV_SC_DDA1_EN (1 << 31)
1918 /** Turns on the first subcarrier phase generation DDA */
1919 # define TV_SC_DDA2_EN (1 << 30)
1920 /** Turns on the first subcarrier phase generation DDA */
1921 # define TV_SC_DDA3_EN (1 << 29)
1922 /** Sets the subcarrier DDA to reset frequency every other field */
1923 # define TV_SC_RESET_EVERY_2 (0 << 24)
1924 /** Sets the subcarrier DDA to reset frequency every fourth field */
1925 # define TV_SC_RESET_EVERY_4 (1 << 24)
1926 /** Sets the subcarrier DDA to reset frequency every eighth field */
1927 # define TV_SC_RESET_EVERY_8 (2 << 24)
1928 /** Sets the subcarrier DDA to never reset the frequency */
1929 # define TV_SC_RESET_NEVER (3 << 24)
1930 /** Sets the peak amplitude of the colorburst.*/
1931 # define TV_BURST_LEVEL_MASK 0x00ff0000
1932 # define TV_BURST_LEVEL_SHIFT 16
1933 /** Sets the increment of the first subcarrier phase generation DDA */
1934 # define TV_SCDDA1_INC_MASK 0x00000fff
1935 # define TV_SCDDA1_INC_SHIFT 0
1937 #define TV_SC_CTL_2 0x68064
1938 /** Sets the rollover for the second subcarrier phase generation DDA */
1939 # define TV_SCDDA2_SIZE_MASK 0x7fff0000
1940 # define TV_SCDDA2_SIZE_SHIFT 16
1941 /** Sets the increent of the second subcarrier phase generation DDA */
1942 # define TV_SCDDA2_INC_MASK 0x00007fff
1943 # define TV_SCDDA2_INC_SHIFT 0
1945 #define TV_SC_CTL_3 0x68068
1946 /** Sets the rollover for the third subcarrier phase generation DDA */
1947 # define TV_SCDDA3_SIZE_MASK 0x7fff0000
1948 # define TV_SCDDA3_SIZE_SHIFT 16
1949 /** Sets the increent of the third subcarrier phase generation DDA */
1950 # define TV_SCDDA3_INC_MASK 0x00007fff
1951 # define TV_SCDDA3_INC_SHIFT 0
1953 #define TV_WIN_POS 0x68070
1954 /** X coordinate of the display from the start of horizontal active */
1955 # define TV_XPOS_MASK 0x1fff0000
1956 # define TV_XPOS_SHIFT 16
1957 /** Y coordinate of the display from the start of vertical active (NBR) */
1958 # define TV_YPOS_MASK 0x00000fff
1959 # define TV_YPOS_SHIFT 0
1961 #define TV_WIN_SIZE 0x68074
1962 /** Horizontal size of the display window, measured in pixels*/
1963 # define TV_XSIZE_MASK 0x1fff0000
1964 # define TV_XSIZE_SHIFT 16
1966 * Vertical size of the display window, measured in pixels.
1968 * Must be even for interlaced modes.
1970 # define TV_YSIZE_MASK 0x00000fff
1971 # define TV_YSIZE_SHIFT 0
1973 #define TV_FILTER_CTL_1 0x68080
1975 * Enables automatic scaling calculation.
1977 * If set, the rest of the registers are ignored, and the calculated values can
1978 * be read back from the register.
1980 # define TV_AUTO_SCALE (1 << 31)
1982 * Disables the vertical filter.
1984 * This is required on modes more than 1024 pixels wide */
1985 # define TV_V_FILTER_BYPASS (1 << 29)
1986 /** Enables adaptive vertical filtering */
1987 # define TV_VADAPT (1 << 28)
1988 # define TV_VADAPT_MODE_MASK (3 << 26)
1989 /** Selects the least adaptive vertical filtering mode */
1990 # define TV_VADAPT_MODE_LEAST (0 << 26)
1991 /** Selects the moderately adaptive vertical filtering mode */
1992 # define TV_VADAPT_MODE_MODERATE (1 << 26)
1993 /** Selects the most adaptive vertical filtering mode */
1994 # define TV_VADAPT_MODE_MOST (3 << 26)
1996 * Sets the horizontal scaling factor.
1998 * This should be the fractional part of the horizontal scaling factor divided
1999 * by the oversampling rate. TV_HSCALE should be less than 1, and set to:
2001 * (src width - 1) / ((oversample * dest width) - 1)
2003 # define TV_HSCALE_FRAC_MASK 0x00003fff
2004 # define TV_HSCALE_FRAC_SHIFT 0
2006 #define TV_FILTER_CTL_2 0x68084
2008 * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
2010 * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
2012 # define TV_VSCALE_INT_MASK 0x00038000
2013 # define TV_VSCALE_INT_SHIFT 15
2015 * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
2017 * \sa TV_VSCALE_INT_MASK
2019 # define TV_VSCALE_FRAC_MASK 0x00007fff
2020 # define TV_VSCALE_FRAC_SHIFT 0
2022 #define TV_FILTER_CTL_3 0x68088
2024 * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
2026 * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
2028 * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
2030 # define TV_VSCALE_IP_INT_MASK 0x00038000
2031 # define TV_VSCALE_IP_INT_SHIFT 15
2033 * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
2035 * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
2037 * \sa TV_VSCALE_IP_INT_MASK
2039 # define TV_VSCALE_IP_FRAC_MASK 0x00007fff
2040 # define TV_VSCALE_IP_FRAC_SHIFT 0
2042 #define TV_CC_CONTROL 0x68090
2043 # define TV_CC_ENABLE (1 << 31)
2045 * Specifies which field to send the CC data in.
2047 * CC data is usually sent in field 0.
2049 # define TV_CC_FID_MASK (1 << 27)
2050 # define TV_CC_FID_SHIFT 27
2051 /** Sets the horizontal position of the CC data. Usually 135. */
2052 # define TV_CC_HOFF_MASK 0x03ff0000
2053 # define TV_CC_HOFF_SHIFT 16
2054 /** Sets the vertical position of the CC data. Usually 21 */
2055 # define TV_CC_LINE_MASK 0x0000003f
2056 # define TV_CC_LINE_SHIFT 0
2058 #define TV_CC_DATA 0x68094
2059 # define TV_CC_RDY (1 << 31)
2060 /** Second word of CC data to be transmitted. */
2061 # define TV_CC_DATA_2_MASK 0x007f0000
2062 # define TV_CC_DATA_2_SHIFT 16
2063 /** First word of CC data to be transmitted. */
2064 # define TV_CC_DATA_1_MASK 0x0000007f
2065 # define TV_CC_DATA_1_SHIFT 0
2067 #define TV_H_LUMA_0 0x68100
2068 #define TV_H_LUMA_59 0x681ec
2069 #define TV_H_CHROMA_0 0x68200
2070 #define TV_H_CHROMA_59 0x682ec
2071 #define TV_V_LUMA_0 0x68300
2072 #define TV_V_LUMA_42 0x683a8
2073 #define TV_V_CHROMA_0 0x68400
2074 #define TV_V_CHROMA_42 0x684a8
2077 #define DP_A 0x64000 /* eDP */
2078 #define DP_B 0x64100
2079 #define DP_C 0x64200
2080 #define DP_D 0x64300
2082 #define DP_PORT_EN (1 << 31)
2083 #define DP_PIPEB_SELECT (1 << 30)
2084 #define DP_PIPE_MASK (1 << 30)
2086 /* Link training mode - select a suitable mode for each stage */
2087 #define DP_LINK_TRAIN_PAT_1 (0 << 28)
2088 #define DP_LINK_TRAIN_PAT_2 (1 << 28)
2089 #define DP_LINK_TRAIN_PAT_IDLE (2 << 28)
2090 #define DP_LINK_TRAIN_OFF (3 << 28)
2091 #define DP_LINK_TRAIN_MASK (3 << 28)
2092 #define DP_LINK_TRAIN_SHIFT 28
2094 /* CPT Link training mode */
2095 #define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)
2096 #define DP_LINK_TRAIN_PAT_2_CPT (1 << 8)
2097 #define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8)
2098 #define DP_LINK_TRAIN_OFF_CPT (3 << 8)
2099 #define DP_LINK_TRAIN_MASK_CPT (7 << 8)
2100 #define DP_LINK_TRAIN_SHIFT_CPT 8
2102 /* Signal voltages. These are mostly controlled by the other end */
2103 #define DP_VOLTAGE_0_4 (0 << 25)
2104 #define DP_VOLTAGE_0_6 (1 << 25)
2105 #define DP_VOLTAGE_0_8 (2 << 25)
2106 #define DP_VOLTAGE_1_2 (3 << 25)
2107 #define DP_VOLTAGE_MASK (7 << 25)
2108 #define DP_VOLTAGE_SHIFT 25
2110 /* Signal pre-emphasis levels, like voltages, the other end tells us what
2113 #define DP_PRE_EMPHASIS_0 (0 << 22)
2114 #define DP_PRE_EMPHASIS_3_5 (1 << 22)
2115 #define DP_PRE_EMPHASIS_6 (2 << 22)
2116 #define DP_PRE_EMPHASIS_9_5 (3 << 22)
2117 #define DP_PRE_EMPHASIS_MASK (7 << 22)
2118 #define DP_PRE_EMPHASIS_SHIFT 22
2120 /* How many wires to use. I guess 3 was too hard */
2121 #define DP_PORT_WIDTH_1 (0 << 19)
2122 #define DP_PORT_WIDTH_2 (1 << 19)
2123 #define DP_PORT_WIDTH_4 (3 << 19)
2124 #define DP_PORT_WIDTH_MASK (7 << 19)
2126 /* Mystic DPCD version 1.1 special mode */
2127 #define DP_ENHANCED_FRAMING (1 << 18)
2130 #define DP_PLL_FREQ_270MHZ (0 << 16)
2131 #define DP_PLL_FREQ_160MHZ (1 << 16)
2132 #define DP_PLL_FREQ_MASK (3 << 16)
2134 /** locked once port is enabled */
2135 #define DP_PORT_REVERSAL (1 << 15)
2138 #define DP_PLL_ENABLE (1 << 14)
2140 /** sends the clock on lane 15 of the PEG for debug */
2141 #define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
2143 #define DP_SCRAMBLING_DISABLE (1 << 12)
2144 #define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7)
2146 /** limit RGB values to avoid confusing TVs */
2147 #define DP_COLOR_RANGE_16_235 (1 << 8)
2149 /** Turn on the audio link */
2150 #define DP_AUDIO_OUTPUT_ENABLE (1 << 6)
2152 /** vs and hs sync polarity */
2153 #define DP_SYNC_VS_HIGH (1 << 4)
2154 #define DP_SYNC_HS_HIGH (1 << 3)
2157 #define DP_DETECTED (1 << 2)
2159 /** The aux channel provides a way to talk to the
2160 * signal sink for DDC etc. Max packet size supported
2161 * is 20 bytes in each direction, hence the 5 fixed
2164 #define DPA_AUX_CH_CTL 0x64010
2165 #define DPA_AUX_CH_DATA1 0x64014
2166 #define DPA_AUX_CH_DATA2 0x64018
2167 #define DPA_AUX_CH_DATA3 0x6401c
2168 #define DPA_AUX_CH_DATA4 0x64020
2169 #define DPA_AUX_CH_DATA5 0x64024
2171 #define DPB_AUX_CH_CTL 0x64110
2172 #define DPB_AUX_CH_DATA1 0x64114
2173 #define DPB_AUX_CH_DATA2 0x64118
2174 #define DPB_AUX_CH_DATA3 0x6411c
2175 #define DPB_AUX_CH_DATA4 0x64120
2176 #define DPB_AUX_CH_DATA5 0x64124
2178 #define DPC_AUX_CH_CTL 0x64210
2179 #define DPC_AUX_CH_DATA1 0x64214
2180 #define DPC_AUX_CH_DATA2 0x64218
2181 #define DPC_AUX_CH_DATA3 0x6421c
2182 #define DPC_AUX_CH_DATA4 0x64220
2183 #define DPC_AUX_CH_DATA5 0x64224
2185 #define DPD_AUX_CH_CTL 0x64310
2186 #define DPD_AUX_CH_DATA1 0x64314
2187 #define DPD_AUX_CH_DATA2 0x64318
2188 #define DPD_AUX_CH_DATA3 0x6431c
2189 #define DPD_AUX_CH_DATA4 0x64320
2190 #define DPD_AUX_CH_DATA5 0x64324
2192 #define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
2193 #define DP_AUX_CH_CTL_DONE (1 << 30)
2194 #define DP_AUX_CH_CTL_INTERRUPT (1 << 29)
2195 #define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28)
2196 #define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26)
2197 #define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26)
2198 #define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26)
2199 #define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26)
2200 #define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26)
2201 #define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25)
2202 #define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20)
2203 #define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20
2204 #define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16)
2205 #define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16
2206 #define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15)
2207 #define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14)
2208 #define DP_AUX_CH_CTL_SYNC_TEST (1 << 13)
2209 #define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12)
2210 #define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11)
2211 #define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff)
2212 #define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0
2215 * Computing GMCH M and N values for the Display Port link
2217 * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes
2219 * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz)
2221 * The GMCH value is used internally
2223 * bytes_per_pixel is the number of bytes coming out of the plane,
2224 * which is after the LUTs, so we want the bytes for our color format.
2225 * For our current usage, this is always 3, one byte for R, G and B.
2227 #define _PIPEA_GMCH_DATA_M 0x70050
2228 #define _PIPEB_GMCH_DATA_M 0x71050
2230 /* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
2231 #define PIPE_GMCH_DATA_M_TU_SIZE_MASK (0x3f << 25)
2232 #define PIPE_GMCH_DATA_M_TU_SIZE_SHIFT 25
2234 #define PIPE_GMCH_DATA_M_MASK (0xffffff)
2236 #define _PIPEA_GMCH_DATA_N 0x70054
2237 #define _PIPEB_GMCH_DATA_N 0x71054
2238 #define PIPE_GMCH_DATA_N_MASK (0xffffff)
2241 * Computing Link M and N values for the Display Port link
2243 * Link M / N = pixel_clock / ls_clk
2245 * (the DP spec calls pixel_clock the 'strm_clk')
2247 * The Link value is transmitted in the Main Stream
2248 * Attributes and VB-ID.
2251 #define _PIPEA_DP_LINK_M 0x70060
2252 #define _PIPEB_DP_LINK_M 0x71060
2253 #define PIPEA_DP_LINK_M_MASK (0xffffff)
2255 #define _PIPEA_DP_LINK_N 0x70064
2256 #define _PIPEB_DP_LINK_N 0x71064
2257 #define PIPEA_DP_LINK_N_MASK (0xffffff)
2259 #define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M)
2260 #define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N)
2261 #define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M)
2262 #define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N)
2264 /* Display & cursor control */
2267 #define _PIPEADSL 0x70000
2268 #define DSL_LINEMASK 0x00000fff
2269 #define _PIPEACONF 0x70008
2270 #define PIPECONF_ENABLE (1<<31)
2271 #define PIPECONF_DISABLE 0
2272 #define PIPECONF_DOUBLE_WIDE (1<<30)
2273 #define I965_PIPECONF_ACTIVE (1<<30)
2274 #define PIPECONF_SINGLE_WIDE 0
2275 #define PIPECONF_PIPE_UNLOCKED 0
2276 #define PIPECONF_PIPE_LOCKED (1<<25)
2277 #define PIPECONF_PALETTE 0
2278 #define PIPECONF_GAMMA (1<<24)
2279 #define PIPECONF_FORCE_BORDER (1<<25)
2280 #define PIPECONF_PROGRESSIVE (0 << 21)
2281 #define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
2282 #define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
2283 #define PIPECONF_CXSR_DOWNCLOCK (1<<16)
2284 #define PIPECONF_BPP_MASK (0x000000e0)
2285 #define PIPECONF_BPP_8 (0<<5)
2286 #define PIPECONF_BPP_10 (1<<5)
2287 #define PIPECONF_BPP_6 (2<<5)
2288 #define PIPECONF_BPP_12 (3<<5)
2289 #define PIPECONF_DITHER_EN (1<<4)
2290 #define PIPECONF_DITHER_TYPE_MASK (0x0000000c)
2291 #define PIPECONF_DITHER_TYPE_SP (0<<2)
2292 #define PIPECONF_DITHER_TYPE_ST1 (1<<2)
2293 #define PIPECONF_DITHER_TYPE_ST2 (2<<2)
2294 #define PIPECONF_DITHER_TYPE_TEMP (3<<2)
2295 #define _PIPEASTAT 0x70024
2296 #define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31)
2297 #define PIPE_CRC_ERROR_ENABLE (1UL<<29)
2298 #define PIPE_CRC_DONE_ENABLE (1UL<<28)
2299 #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27)
2300 #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26)
2301 #define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25)
2302 #define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
2303 #define PIPE_DPST_EVENT_ENABLE (1UL<<23)
2304 #define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
2305 #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
2306 #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
2307 #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */
2308 #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
2309 #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17)
2310 #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16)
2311 #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
2312 #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
2313 #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11)
2314 #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10)
2315 #define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9)
2316 #define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
2317 #define PIPE_DPST_EVENT_STATUS (1UL<<7)
2318 #define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6)
2319 #define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5)
2320 #define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4)
2321 #define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */
2322 #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
2323 #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
2324 #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
2325 #define PIPE_BPC_MASK (7 << 5) /* Ironlake */
2326 #define PIPE_8BPC (0 << 5)
2327 #define PIPE_10BPC (1 << 5)
2328 #define PIPE_6BPC (2 << 5)
2329 #define PIPE_12BPC (3 << 5)
2331 #define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
2332 #define PIPECONF(pipe) _PIPE(pipe, _PIPEACONF, _PIPEBCONF)
2333 #define PIPEDSL(pipe) _PIPE(pipe, _PIPEADSL, _PIPEBDSL)
2334 #define PIPEFRAME(pipe) _PIPE(pipe, _PIPEAFRAMEHIGH, _PIPEBFRAMEHIGH)
2335 #define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
2336 #define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
2338 #define DSPARB 0x70030
2339 #define DSPARB_CSTART_MASK (0x7f << 7)
2340 #define DSPARB_CSTART_SHIFT 7
2341 #define DSPARB_BSTART_MASK (0x7f)
2342 #define DSPARB_BSTART_SHIFT 0
2343 #define DSPARB_BEND_SHIFT 9 /* on 855 */
2344 #define DSPARB_AEND_SHIFT 0
2346 #define DSPFW1 0x70034
2347 #define DSPFW_SR_SHIFT 23
2348 #define DSPFW_SR_MASK (0x1ff<<23)
2349 #define DSPFW_CURSORB_SHIFT 16
2350 #define DSPFW_CURSORB_MASK (0x3f<<16)
2351 #define DSPFW_PLANEB_SHIFT 8
2352 #define DSPFW_PLANEB_MASK (0x7f<<8)
2353 #define DSPFW_PLANEA_MASK (0x7f)
2354 #define DSPFW2 0x70038
2355 #define DSPFW_CURSORA_MASK 0x00003f00
2356 #define DSPFW_CURSORA_SHIFT 8
2357 #define DSPFW_PLANEC_MASK (0x7f)
2358 #define DSPFW3 0x7003c
2359 #define DSPFW_HPLL_SR_EN (1<<31)
2360 #define DSPFW_CURSOR_SR_SHIFT 24
2361 #define PINEVIEW_SELF_REFRESH_EN (1<<30)
2362 #define DSPFW_CURSOR_SR_MASK (0x3f<<24)
2363 #define DSPFW_HPLL_CURSOR_SHIFT 16
2364 #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16)
2365 #define DSPFW_HPLL_SR_MASK (0x1ff)
2367 /* FIFO watermark sizes etc */
2368 #define G4X_FIFO_LINE_SIZE 64
2369 #define I915_FIFO_LINE_SIZE 64
2370 #define I830_FIFO_LINE_SIZE 32
2372 #define G4X_FIFO_SIZE 127
2373 #define I965_FIFO_SIZE 512
2374 #define I945_FIFO_SIZE 127
2375 #define I915_FIFO_SIZE 95
2376 #define I855GM_FIFO_SIZE 127 /* In cachelines */
2377 #define I830_FIFO_SIZE 95
2379 #define G4X_MAX_WM 0x3f
2380 #define I915_MAX_WM 0x3f
2382 #define PINEVIEW_DISPLAY_FIFO 512 /* in 64byte unit */
2383 #define PINEVIEW_FIFO_LINE_SIZE 64
2384 #define PINEVIEW_MAX_WM 0x1ff
2385 #define PINEVIEW_DFT_WM 0x3f
2386 #define PINEVIEW_DFT_HPLLOFF_WM 0
2387 #define PINEVIEW_GUARD_WM 10
2388 #define PINEVIEW_CURSOR_FIFO 64
2389 #define PINEVIEW_CURSOR_MAX_WM 0x3f
2390 #define PINEVIEW_CURSOR_DFT_WM 0
2391 #define PINEVIEW_CURSOR_GUARD_WM 5
2393 #define I965_CURSOR_FIFO 64
2394 #define I965_CURSOR_MAX_WM 32
2395 #define I965_CURSOR_DFT_WM 8
2397 /* define the Watermark register on Ironlake */
2398 #define WM0_PIPEA_ILK 0x45100
2399 #define WM0_PIPE_PLANE_MASK (0x7f<<16)
2400 #define WM0_PIPE_PLANE_SHIFT 16
2401 #define WM0_PIPE_SPRITE_MASK (0x3f<<8)
2402 #define WM0_PIPE_SPRITE_SHIFT 8
2403 #define WM0_PIPE_CURSOR_MASK (0x1f)
2405 #define WM0_PIPEB_ILK 0x45104
2406 #define WM1_LP_ILK 0x45108
2407 #define WM1_LP_SR_EN (1<<31)
2408 #define WM1_LP_LATENCY_SHIFT 24
2409 #define WM1_LP_LATENCY_MASK (0x7f<<24)
2410 #define WM1_LP_FBC_MASK (0xf<<20)
2411 #define WM1_LP_FBC_SHIFT 20
2412 #define WM1_LP_SR_MASK (0x1ff<<8)
2413 #define WM1_LP_SR_SHIFT 8
2414 #define WM1_LP_CURSOR_MASK (0x3f)
2415 #define WM2_LP_ILK 0x4510c
2416 #define WM2_LP_EN (1<<31)
2417 #define WM3_LP_ILK 0x45110
2418 #define WM3_LP_EN (1<<31)
2419 #define WM1S_LP_ILK 0x45120
2420 #define WM1S_LP_EN (1<<31)
2422 /* Memory latency timer register */
2423 #define MLTR_ILK 0x11222
2424 #define MLTR_WM1_SHIFT 0
2425 #define MLTR_WM2_SHIFT 8
2426 /* the unit of memory self-refresh latency time is 0.5us */
2427 #define ILK_SRLT_MASK 0x3f
2428 #define ILK_LATENCY(shift) (I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK)
2429 #define ILK_READ_WM1_LATENCY() ILK_LATENCY(MLTR_WM1_SHIFT)
2430 #define ILK_READ_WM2_LATENCY() ILK_LATENCY(MLTR_WM2_SHIFT)
2432 /* define the fifo size on Ironlake */
2433 #define ILK_DISPLAY_FIFO 128
2434 #define ILK_DISPLAY_MAXWM 64
2435 #define ILK_DISPLAY_DFTWM 8
2436 #define ILK_CURSOR_FIFO 32
2437 #define ILK_CURSOR_MAXWM 16
2438 #define ILK_CURSOR_DFTWM 8
2440 #define ILK_DISPLAY_SR_FIFO 512
2441 #define ILK_DISPLAY_MAX_SRWM 0x1ff
2442 #define ILK_DISPLAY_DFT_SRWM 0x3f
2443 #define ILK_CURSOR_SR_FIFO 64
2444 #define ILK_CURSOR_MAX_SRWM 0x3f
2445 #define ILK_CURSOR_DFT_SRWM 8
2447 #define ILK_FIFO_LINE_SIZE 64
2449 /* define the WM info on Sandybridge */
2450 #define SNB_DISPLAY_FIFO 128
2451 #define SNB_DISPLAY_MAXWM 0x7f /* bit 16:22 */
2452 #define SNB_DISPLAY_DFTWM 8
2453 #define SNB_CURSOR_FIFO 32
2454 #define SNB_CURSOR_MAXWM 0x1f /* bit 4:0 */
2455 #define SNB_CURSOR_DFTWM 8
2457 #define SNB_DISPLAY_SR_FIFO 512
2458 #define SNB_DISPLAY_MAX_SRWM 0x1ff /* bit 16:8 */
2459 #define SNB_DISPLAY_DFT_SRWM 0x3f
2460 #define SNB_CURSOR_SR_FIFO 64
2461 #define SNB_CURSOR_MAX_SRWM 0x3f /* bit 5:0 */
2462 #define SNB_CURSOR_DFT_SRWM 8
2464 #define SNB_FBC_MAX_SRWM 0xf /* bit 23:20 */
2466 #define SNB_FIFO_LINE_SIZE 64
2469 /* the address where we get all kinds of latency value */
2470 #define SSKPD 0x5d10
2471 #define SSKPD_WM_MASK 0x3f
2472 #define SSKPD_WM0_SHIFT 0
2473 #define SSKPD_WM1_SHIFT 8
2474 #define SSKPD_WM2_SHIFT 16
2475 #define SSKPD_WM3_SHIFT 24
2477 #define SNB_LATENCY(shift) (I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK)
2478 #define SNB_READ_WM0_LATENCY() SNB_LATENCY(SSKPD_WM0_SHIFT)
2479 #define SNB_READ_WM1_LATENCY() SNB_LATENCY(SSKPD_WM1_SHIFT)
2480 #define SNB_READ_WM2_LATENCY() SNB_LATENCY(SSKPD_WM2_SHIFT)
2481 #define SNB_READ_WM3_LATENCY() SNB_LATENCY(SSKPD_WM3_SHIFT)
2484 * The two pipe frame counter registers are not synchronized, so
2485 * reading a stable value is somewhat tricky. The following code
2489 * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
2490 * PIPE_FRAME_HIGH_SHIFT;
2491 * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
2492 * PIPE_FRAME_LOW_SHIFT);
2493 * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
2494 * PIPE_FRAME_HIGH_SHIFT);
2495 * } while (high1 != high2);
2496 * frame = (high1 << 8) | low1;
2498 #define _PIPEAFRAMEHIGH 0x70040
2499 #define PIPE_FRAME_HIGH_MASK 0x0000ffff
2500 #define PIPE_FRAME_HIGH_SHIFT 0
2501 #define _PIPEAFRAMEPIXEL 0x70044
2502 #define PIPE_FRAME_LOW_MASK 0xff000000
2503 #define PIPE_FRAME_LOW_SHIFT 24
2504 #define PIPE_PIXEL_MASK 0x00ffffff
2505 #define PIPE_PIXEL_SHIFT 0
2506 /* GM45+ just has to be different */
2507 #define _PIPEA_FRMCOUNT_GM45 0x70040
2508 #define _PIPEA_FLIPCOUNT_GM45 0x70044
2509 #define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45)
2511 /* Cursor A & B regs */
2512 #define _CURACNTR 0x70080
2513 /* Old style CUR*CNTR flags (desktop 8xx) */
2514 #define CURSOR_ENABLE 0x80000000
2515 #define CURSOR_GAMMA_ENABLE 0x40000000
2516 #define CURSOR_STRIDE_MASK 0x30000000
2517 #define CURSOR_FORMAT_SHIFT 24
2518 #define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT)
2519 #define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT)
2520 #define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT)
2521 #define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT)
2522 #define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT)
2523 #define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT)
2524 /* New style CUR*CNTR flags */
2525 #define CURSOR_MODE 0x27
2526 #define CURSOR_MODE_DISABLE 0x00
2527 #define CURSOR_MODE_64_32B_AX 0x07
2528 #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
2529 #define MCURSOR_PIPE_SELECT (1 << 28)
2530 #define MCURSOR_PIPE_A 0x00
2531 #define MCURSOR_PIPE_B (1 << 28)
2532 #define MCURSOR_GAMMA_ENABLE (1 << 26)
2533 #define _CURABASE 0x70084
2534 #define _CURAPOS 0x70088
2535 #define CURSOR_POS_MASK 0x007FF
2536 #define CURSOR_POS_SIGN 0x8000
2537 #define CURSOR_X_SHIFT 0
2538 #define CURSOR_Y_SHIFT 16
2539 #define CURSIZE 0x700a0
2540 #define _CURBCNTR 0x700c0
2541 #define _CURBBASE 0x700c4
2542 #define _CURBPOS 0x700c8
2544 #define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR)
2545 #define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE)
2546 #define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS)
2548 /* Display A control */
2549 #define _DSPACNTR 0x70180
2550 #define DISPLAY_PLANE_ENABLE (1<<31)
2551 #define DISPLAY_PLANE_DISABLE 0
2552 #define DISPPLANE_GAMMA_ENABLE (1<<30)
2553 #define DISPPLANE_GAMMA_DISABLE 0
2554 #define DISPPLANE_PIXFORMAT_MASK (0xf<<26)
2555 #define DISPPLANE_8BPP (0x2<<26)
2556 #define DISPPLANE_15_16BPP (0x4<<26)
2557 #define DISPPLANE_16BPP (0x5<<26)
2558 #define DISPPLANE_32BPP_NO_ALPHA (0x6<<26)
2559 #define DISPPLANE_32BPP (0x7<<26)
2560 #define DISPPLANE_32BPP_30BIT_NO_ALPHA (0xa<<26)
2561 #define DISPPLANE_STEREO_ENABLE (1<<25)
2562 #define DISPPLANE_STEREO_DISABLE 0
2563 #define DISPPLANE_SEL_PIPE_SHIFT 24
2564 #define DISPPLANE_SEL_PIPE_MASK (3<<DISPPLANE_SEL_PIPE_SHIFT)
2565 #define DISPPLANE_SEL_PIPE_A 0
2566 #define DISPPLANE_SEL_PIPE_B (1<<DISPPLANE_SEL_PIPE_SHIFT)
2567 #define DISPPLANE_SRC_KEY_ENABLE (1<<22)
2568 #define DISPPLANE_SRC_KEY_DISABLE 0
2569 #define DISPPLANE_LINE_DOUBLE (1<<20)
2570 #define DISPPLANE_NO_LINE_DOUBLE 0
2571 #define DISPPLANE_STEREO_POLARITY_FIRST 0
2572 #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
2573 #define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */
2574 #define DISPPLANE_TILED (1<<10)
2575 #define _DSPAADDR 0x70184
2576 #define _DSPASTRIDE 0x70188
2577 #define _DSPAPOS 0x7018C /* reserved */
2578 #define _DSPASIZE 0x70190
2579 #define _DSPASURF 0x7019C /* 965+ only */
2580 #define _DSPATILEOFF 0x701A4 /* 965+ only */
2582 #define DSPCNTR(plane) _PIPE(plane, _DSPACNTR, _DSPBCNTR)
2583 #define DSPADDR(plane) _PIPE(plane, _DSPAADDR, _DSPBADDR)
2584 #define DSPSTRIDE(plane) _PIPE(plane, _DSPASTRIDE, _DSPBSTRIDE)
2585 #define DSPPOS(plane) _PIPE(plane, _DSPAPOS, _DSPBPOS)
2586 #define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE)
2587 #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
2588 #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
2591 #define SWF00 0x71410
2592 #define SWF01 0x71414
2593 #define SWF02 0x71418
2594 #define SWF03 0x7141c
2595 #define SWF04 0x71420
2596 #define SWF05 0x71424
2597 #define SWF06 0x71428
2598 #define SWF10 0x70410
2599 #define SWF11 0x70414
2600 #define SWF14 0x71420
2601 #define SWF30 0x72414
2602 #define SWF31 0x72418
2603 #define SWF32 0x7241c
2606 #define _PIPEBDSL 0x71000
2607 #define _PIPEBCONF 0x71008
2608 #define _PIPEBSTAT 0x71024
2609 #define _PIPEBFRAMEHIGH 0x71040
2610 #define _PIPEBFRAMEPIXEL 0x71044
2611 #define _PIPEB_FRMCOUNT_GM45 0x71040
2612 #define _PIPEB_FLIPCOUNT_GM45 0x71044
2615 /* Display B control */
2616 #define _DSPBCNTR 0x71180
2617 #define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15)
2618 #define DISPPLANE_ALPHA_TRANS_DISABLE 0
2619 #define DISPPLANE_SPRITE_ABOVE_DISPLAY 0
2620 #define DISPPLANE_SPRITE_ABOVE_OVERLAY (1)
2621 #define _DSPBADDR 0x71184
2622 #define _DSPBSTRIDE 0x71188
2623 #define _DSPBPOS 0x7118C
2624 #define _DSPBSIZE 0x71190
2625 #define _DSPBSURF 0x7119C
2626 #define _DSPBTILEOFF 0x711A4
2629 #define VGACNTRL 0x71400
2630 # define VGA_DISP_DISABLE (1 << 31)
2631 # define VGA_2X_MODE (1 << 30)
2632 # define VGA_PIPE_B_SELECT (1 << 29)
2636 #define CPU_VGACNTRL 0x41000
2638 #define DIGITAL_PORT_HOTPLUG_CNTRL 0x44030
2639 #define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4)
2640 #define DIGITAL_PORTA_SHORT_PULSE_2MS (0 << 2)
2641 #define DIGITAL_PORTA_SHORT_PULSE_4_5MS (1 << 2)
2642 #define DIGITAL_PORTA_SHORT_PULSE_6MS (2 << 2)
2643 #define DIGITAL_PORTA_SHORT_PULSE_100MS (3 << 2)
2644 #define DIGITAL_PORTA_NO_DETECT (0 << 0)
2645 #define DIGITAL_PORTA_LONG_PULSE_DETECT_MASK (1 << 1)
2646 #define DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK (1 << 0)
2648 /* refresh rate hardware control */
2649 #define RR_HW_CTL 0x45300
2650 #define RR_HW_LOW_POWER_FRAMES_MASK 0xff
2651 #define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00
2653 #define FDI_PLL_BIOS_0 0x46000
2654 #define FDI_PLL_FB_CLOCK_MASK 0xff
2655 #define FDI_PLL_BIOS_1 0x46004
2656 #define FDI_PLL_BIOS_2 0x46008
2657 #define DISPLAY_PORT_PLL_BIOS_0 0x4600c
2658 #define DISPLAY_PORT_PLL_BIOS_1 0x46010
2659 #define DISPLAY_PORT_PLL_BIOS_2 0x46014
2661 #define PCH_DSPCLK_GATE_D 0x42020
2662 # define DPFCUNIT_CLOCK_GATE_DISABLE (1 << 9)
2663 # define DPFCRUNIT_CLOCK_GATE_DISABLE (1 << 8)
2664 # define DPFDUNIT_CLOCK_GATE_DISABLE (1 << 7)
2665 # define DPARBUNIT_CLOCK_GATE_DISABLE (1 << 5)
2667 #define PCH_3DCGDIS0 0x46020
2668 # define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18)
2669 # define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1)
2671 #define PCH_3DCGDIS1 0x46024
2672 # define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11)
2674 #define FDI_PLL_FREQ_CTL 0x46030
2675 #define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24)
2676 #define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00
2677 #define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff
2680 #define _PIPEA_DATA_M1 0x60030
2681 #define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */
2682 #define TU_SIZE_MASK 0x7e000000
2683 #define PIPE_DATA_M1_OFFSET 0
2684 #define _PIPEA_DATA_N1 0x60034
2685 #define PIPE_DATA_N1_OFFSET 0
2687 #define _PIPEA_DATA_M2 0x60038
2688 #define PIPE_DATA_M2_OFFSET 0
2689 #define _PIPEA_DATA_N2 0x6003c
2690 #define PIPE_DATA_N2_OFFSET 0
2692 #define _PIPEA_LINK_M1 0x60040
2693 #define PIPE_LINK_M1_OFFSET 0
2694 #define _PIPEA_LINK_N1 0x60044
2695 #define PIPE_LINK_N1_OFFSET 0
2697 #define _PIPEA_LINK_M2 0x60048
2698 #define PIPE_LINK_M2_OFFSET 0
2699 #define _PIPEA_LINK_N2 0x6004c
2700 #define PIPE_LINK_N2_OFFSET 0
2702 /* PIPEB timing regs are same start from 0x61000 */
2704 #define _PIPEB_DATA_M1 0x61030
2705 #define _PIPEB_DATA_N1 0x61034
2707 #define _PIPEB_DATA_M2 0x61038
2708 #define _PIPEB_DATA_N2 0x6103c
2710 #define _PIPEB_LINK_M1 0x61040
2711 #define _PIPEB_LINK_N1 0x61044
2713 #define _PIPEB_LINK_M2 0x61048
2714 #define _PIPEB_LINK_N2 0x6104c
2716 #define PIPE_DATA_M1(pipe) _PIPE(pipe, _PIPEA_DATA_M1, _PIPEB_DATA_M1)
2717 #define PIPE_DATA_N1(pipe) _PIPE(pipe, _PIPEA_DATA_N1, _PIPEB_DATA_N1)
2718 #define PIPE_DATA_M2(pipe) _PIPE(pipe, _PIPEA_DATA_M2, _PIPEB_DATA_M2)
2719 #define PIPE_DATA_N2(pipe) _PIPE(pipe, _PIPEA_DATA_N2, _PIPEB_DATA_N2)
2720 #define PIPE_LINK_M1(pipe) _PIPE(pipe, _PIPEA_LINK_M1, _PIPEB_LINK_M1)
2721 #define PIPE_LINK_N1(pipe) _PIPE(pipe, _PIPEA_LINK_N1, _PIPEB_LINK_N1)
2722 #define PIPE_LINK_M2(pipe) _PIPE(pipe, _PIPEA_LINK_M2, _PIPEB_LINK_M2)
2723 #define PIPE_LINK_N2(pipe) _PIPE(pipe, _PIPEA_LINK_N2, _PIPEB_LINK_N2)
2725 /* CPU panel fitter */
2726 /* IVB+ has 3 fitters, 0 is 7x5 capable, the other two only 3x3 */
2727 #define _PFA_CTL_1 0x68080
2728 #define _PFB_CTL_1 0x68880
2729 #define PF_ENABLE (1<<31)
2730 #define PF_FILTER_MASK (3<<23)
2731 #define PF_FILTER_PROGRAMMED (0<<23)
2732 #define PF_FILTER_MED_3x3 (1<<23)
2733 #define PF_FILTER_EDGE_ENHANCE (2<<23)
2734 #define PF_FILTER_EDGE_SOFTEN (3<<23)
2735 #define _PFA_WIN_SZ 0x68074
2736 #define _PFB_WIN_SZ 0x68874
2737 #define _PFA_WIN_POS 0x68070
2738 #define _PFB_WIN_POS 0x68870
2739 #define _PFA_VSCALE 0x68084
2740 #define _PFB_VSCALE 0x68884
2741 #define _PFA_HSCALE 0x68090
2742 #define _PFB_HSCALE 0x68890
2744 #define PF_CTL(pipe) _PIPE(pipe, _PFA_CTL_1, _PFB_CTL_1)
2745 #define PF_WIN_SZ(pipe) _PIPE(pipe, _PFA_WIN_SZ, _PFB_WIN_SZ)
2746 #define PF_WIN_POS(pipe) _PIPE(pipe, _PFA_WIN_POS, _PFB_WIN_POS)
2747 #define PF_VSCALE(pipe) _PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE)
2748 #define PF_HSCALE(pipe) _PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE)
2750 /* legacy palette */
2751 #define _LGC_PALETTE_A 0x4a000
2752 #define _LGC_PALETTE_B 0x4a800
2753 #define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B)
2756 #define DE_MASTER_IRQ_CONTROL (1 << 31)
2757 #define DE_SPRITEB_FLIP_DONE (1 << 29)
2758 #define DE_SPRITEA_FLIP_DONE (1 << 28)
2759 #define DE_PLANEB_FLIP_DONE (1 << 27)
2760 #define DE_PLANEA_FLIP_DONE (1 << 26)
2761 #define DE_PCU_EVENT (1 << 25)
2762 #define DE_GTT_FAULT (1 << 24)
2763 #define DE_POISON (1 << 23)
2764 #define DE_PERFORM_COUNTER (1 << 22)
2765 #define DE_PCH_EVENT (1 << 21)
2766 #define DE_AUX_CHANNEL_A (1 << 20)
2767 #define DE_DP_A_HOTPLUG (1 << 19)
2768 #define DE_GSE (1 << 18)
2769 #define DE_PIPEB_VBLANK (1 << 15)
2770 #define DE_PIPEB_EVEN_FIELD (1 << 14)
2771 #define DE_PIPEB_ODD_FIELD (1 << 13)
2772 #define DE_PIPEB_LINE_COMPARE (1 << 12)
2773 #define DE_PIPEB_VSYNC (1 << 11)
2774 #define DE_PIPEB_FIFO_UNDERRUN (1 << 8)
2775 #define DE_PIPEA_VBLANK (1 << 7)
2776 #define DE_PIPEA_EVEN_FIELD (1 << 6)
2777 #define DE_PIPEA_ODD_FIELD (1 << 5)
2778 #define DE_PIPEA_LINE_COMPARE (1 << 4)
2779 #define DE_PIPEA_VSYNC (1 << 3)
2780 #define DE_PIPEA_FIFO_UNDERRUN (1 << 0)
2782 /* More Ivybridge lolz */
2783 #define DE_ERR_DEBUG_IVB (1<<30)
2784 #define DE_GSE_IVB (1<<29)
2785 #define DE_PCH_EVENT_IVB (1<<28)
2786 #define DE_DP_A_HOTPLUG_IVB (1<<27)
2787 #define DE_AUX_CHANNEL_A_IVB (1<<26)
2788 #define DE_SPRITEB_FLIP_DONE_IVB (1<<9)
2789 #define DE_SPRITEA_FLIP_DONE_IVB (1<<4)
2790 #define DE_PLANEB_FLIP_DONE_IVB (1<<8)
2791 #define DE_PLANEA_FLIP_DONE_IVB (1<<3)
2792 #define DE_PIPEB_VBLANK_IVB (1<<5)
2793 #define DE_PIPEA_VBLANK_IVB (1<<0)
2795 #define DEISR 0x44000
2796 #define DEIMR 0x44004
2797 #define DEIIR 0x44008
2798 #define DEIER 0x4400c
2801 #define GT_PIPE_NOTIFY (1 << 4)
2802 #define GT_SYNC_STATUS (1 << 2)
2803 #define GT_USER_INTERRUPT (1 << 0)
2804 #define GT_BSD_USER_INTERRUPT (1 << 5)
2805 #define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
2806 #define GT_BLT_USER_INTERRUPT (1 << 22)
2808 #define GTISR 0x44010
2809 #define GTIMR 0x44014
2810 #define GTIIR 0x44018
2811 #define GTIER 0x4401c
2813 #define ILK_DISPLAY_CHICKEN2 0x42004
2814 /* Required on all Ironlake and Sandybridge according to the B-Spec. */
2815 #define ILK_ELPIN_409_SELECT (1 << 25)
2816 #define ILK_DPARB_GATE (1<<22)
2817 #define ILK_VSDPFD_FULL (1<<21)
2818 #define ILK_DISPLAY_CHICKEN_FUSES 0x42014
2819 #define ILK_INTERNAL_GRAPHICS_DISABLE (1<<31)
2820 #define ILK_INTERNAL_DISPLAY_DISABLE (1<<30)
2821 #define ILK_DISPLAY_DEBUG_DISABLE (1<<29)
2822 #define ILK_HDCP_DISABLE (1<<25)
2823 #define ILK_eDP_A_DISABLE (1<<24)
2824 #define ILK_DESKTOP (1<<23)
2825 #define ILK_DSPCLK_GATE 0x42020
2826 #define IVB_VRHUNIT_CLK_GATE (1<<28)
2827 #define ILK_DPARB_CLK_GATE (1<<5)
2828 #define ILK_DPFD_CLK_GATE (1<<7)
2830 /* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
2831 #define ILK_CLK_FBC (1<<7)
2832 #define ILK_DPFC_DIS1 (1<<8)
2833 #define ILK_DPFC_DIS2 (1<<9)
2835 #define DISP_ARB_CTL 0x45000
2836 #define DISP_TILE_SURFACE_SWIZZLING (1<<13)
2837 #define DISP_FBC_WM_DIS (1<<15)
2841 /* south display engine interrupt */
2842 #define SDE_AUDIO_POWER_D (1 << 27)
2843 #define SDE_AUDIO_POWER_C (1 << 26)
2844 #define SDE_AUDIO_POWER_B (1 << 25)
2845 #define SDE_AUDIO_POWER_SHIFT (25)
2846 #define SDE_AUDIO_POWER_MASK (7 << SDE_AUDIO_POWER_SHIFT)
2847 #define SDE_GMBUS (1 << 24)
2848 #define SDE_AUDIO_HDCP_TRANSB (1 << 23)
2849 #define SDE_AUDIO_HDCP_TRANSA (1 << 22)
2850 #define SDE_AUDIO_HDCP_MASK (3 << 22)
2851 #define SDE_AUDIO_TRANSB (1 << 21)
2852 #define SDE_AUDIO_TRANSA (1 << 20)
2853 #define SDE_AUDIO_TRANS_MASK (3 << 20)
2854 #define SDE_POISON (1 << 19)
2856 #define SDE_FDI_RXB (1 << 17)
2857 #define SDE_FDI_RXA (1 << 16)
2858 #define SDE_FDI_MASK (3 << 16)
2859 #define SDE_AUXD (1 << 15)
2860 #define SDE_AUXC (1 << 14)
2861 #define SDE_AUXB (1 << 13)
2862 #define SDE_AUX_MASK (7 << 13)
2864 #define SDE_CRT_HOTPLUG (1 << 11)
2865 #define SDE_PORTD_HOTPLUG (1 << 10)
2866 #define SDE_PORTC_HOTPLUG (1 << 9)
2867 #define SDE_PORTB_HOTPLUG (1 << 8)
2868 #define SDE_SDVOB_HOTPLUG (1 << 6)
2869 #define SDE_HOTPLUG_MASK (0xf << 8)
2870 #define SDE_TRANSB_CRC_DONE (1 << 5)
2871 #define SDE_TRANSB_CRC_ERR (1 << 4)
2872 #define SDE_TRANSB_FIFO_UNDER (1 << 3)
2873 #define SDE_TRANSA_CRC_DONE (1 << 2)
2874 #define SDE_TRANSA_CRC_ERR (1 << 1)
2875 #define SDE_TRANSA_FIFO_UNDER (1 << 0)
2876 #define SDE_TRANS_MASK (0x3f)
2878 #define SDE_CRT_HOTPLUG_CPT (1 << 19)
2879 #define SDE_PORTD_HOTPLUG_CPT (1 << 23)
2880 #define SDE_PORTC_HOTPLUG_CPT (1 << 22)
2881 #define SDE_PORTB_HOTPLUG_CPT (1 << 21)
2882 #define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \
2883 SDE_PORTD_HOTPLUG_CPT | \
2884 SDE_PORTC_HOTPLUG_CPT | \
2885 SDE_PORTB_HOTPLUG_CPT)
2887 #define SDEISR 0xc4000
2888 #define SDEIMR 0xc4004
2889 #define SDEIIR 0xc4008
2890 #define SDEIER 0xc400c
2892 /* digital port hotplug */
2893 #define PCH_PORT_HOTPLUG 0xc4030
2894 #define PORTD_HOTPLUG_ENABLE (1 << 20)
2895 #define PORTD_PULSE_DURATION_2ms (0)
2896 #define PORTD_PULSE_DURATION_4_5ms (1 << 18)
2897 #define PORTD_PULSE_DURATION_6ms (2 << 18)
2898 #define PORTD_PULSE_DURATION_100ms (3 << 18)
2899 #define PORTD_HOTPLUG_NO_DETECT (0)
2900 #define PORTD_HOTPLUG_SHORT_DETECT (1 << 16)
2901 #define PORTD_HOTPLUG_LONG_DETECT (1 << 17)
2902 #define PORTC_HOTPLUG_ENABLE (1 << 12)
2903 #define PORTC_PULSE_DURATION_2ms (0)
2904 #define PORTC_PULSE_DURATION_4_5ms (1 << 10)
2905 #define PORTC_PULSE_DURATION_6ms (2 << 10)
2906 #define PORTC_PULSE_DURATION_100ms (3 << 10)
2907 #define PORTC_HOTPLUG_NO_DETECT (0)
2908 #define PORTC_HOTPLUG_SHORT_DETECT (1 << 8)
2909 #define PORTC_HOTPLUG_LONG_DETECT (1 << 9)
2910 #define PORTB_HOTPLUG_ENABLE (1 << 4)
2911 #define PORTB_PULSE_DURATION_2ms (0)
2912 #define PORTB_PULSE_DURATION_4_5ms (1 << 2)
2913 #define PORTB_PULSE_DURATION_6ms (2 << 2)
2914 #define PORTB_PULSE_DURATION_100ms (3 << 2)
2915 #define PORTB_HOTPLUG_NO_DETECT (0)
2916 #define PORTB_HOTPLUG_SHORT_DETECT (1 << 0)
2917 #define PORTB_HOTPLUG_LONG_DETECT (1 << 1)
2919 #define PCH_GPIOA 0xc5010
2920 #define PCH_GPIOB 0xc5014
2921 #define PCH_GPIOC 0xc5018
2922 #define PCH_GPIOD 0xc501c
2923 #define PCH_GPIOE 0xc5020
2924 #define PCH_GPIOF 0xc5024
2926 #define PCH_GMBUS0 0xc5100
2927 #define PCH_GMBUS1 0xc5104
2928 #define PCH_GMBUS2 0xc5108
2929 #define PCH_GMBUS3 0xc510c
2930 #define PCH_GMBUS4 0xc5110
2931 #define PCH_GMBUS5 0xc5120
2933 #define _PCH_DPLL_A 0xc6014
2934 #define _PCH_DPLL_B 0xc6018
2935 #define PCH_DPLL(pipe) _PIPE(pipe, _PCH_DPLL_A, _PCH_DPLL_B)
2937 #define _PCH_FPA0 0xc6040
2938 #define FP_CB_TUNE (0x3<<22)
2939 #define _PCH_FPA1 0xc6044
2940 #define _PCH_FPB0 0xc6048
2941 #define _PCH_FPB1 0xc604c
2942 #define PCH_FP0(pipe) _PIPE(pipe, _PCH_FPA0, _PCH_FPB0)
2943 #define PCH_FP1(pipe) _PIPE(pipe, _PCH_FPA1, _PCH_FPB1)
2945 #define PCH_DPLL_TEST 0xc606c
2947 #define PCH_DREF_CONTROL 0xC6200
2948 #define DREF_CONTROL_MASK 0x7fc3
2949 #define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13)
2950 #define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13)
2951 #define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13)
2952 #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13)
2953 #define DREF_SSC_SOURCE_DISABLE (0<<11)
2954 #define DREF_SSC_SOURCE_ENABLE (2<<11)
2955 #define DREF_SSC_SOURCE_MASK (3<<11)
2956 #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9)
2957 #define DREF_NONSPREAD_CK505_ENABLE (1<<9)
2958 #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9)
2959 #define DREF_NONSPREAD_SOURCE_MASK (3<<9)
2960 #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7)
2961 #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7)
2962 #define DREF_SUPERSPREAD_SOURCE_MASK (3<<7)
2963 #define DREF_SSC4_DOWNSPREAD (0<<6)
2964 #define DREF_SSC4_CENTERSPREAD (1<<6)
2965 #define DREF_SSC1_DISABLE (0<<1)
2966 #define DREF_SSC1_ENABLE (1<<1)
2967 #define DREF_SSC4_DISABLE (0)
2968 #define DREF_SSC4_ENABLE (1)
2970 #define PCH_RAWCLK_FREQ 0xc6204
2971 #define FDL_TP1_TIMER_SHIFT 12
2972 #define FDL_TP1_TIMER_MASK (3<<12)
2973 #define FDL_TP2_TIMER_SHIFT 10
2974 #define FDL_TP2_TIMER_MASK (3<<10)
2975 #define RAWCLK_FREQ_MASK 0x3ff
2977 #define PCH_DPLL_TMR_CFG 0xc6208
2979 #define PCH_SSC4_PARMS 0xc6210
2980 #define PCH_SSC4_AUX_PARMS 0xc6214
2982 #define PCH_DPLL_SEL 0xc7000
2983 #define TRANSA_DPLL_ENABLE (1<<3)
2984 #define TRANSA_DPLLB_SEL (1<<0)
2985 #define TRANSA_DPLLA_SEL 0
2986 #define TRANSB_DPLL_ENABLE (1<<7)
2987 #define TRANSB_DPLLB_SEL (1<<4)
2988 #define TRANSB_DPLLA_SEL (0)
2989 #define TRANSC_DPLL_ENABLE (1<<11)
2990 #define TRANSC_DPLLB_SEL (1<<8)
2991 #define TRANSC_DPLLA_SEL (0)
2995 #define _TRANS_HTOTAL_A 0xe0000
2996 #define TRANS_HTOTAL_SHIFT 16
2997 #define TRANS_HACTIVE_SHIFT 0
2998 #define _TRANS_HBLANK_A 0xe0004
2999 #define TRANS_HBLANK_END_SHIFT 16
3000 #define TRANS_HBLANK_START_SHIFT 0
3001 #define _TRANS_HSYNC_A 0xe0008
3002 #define TRANS_HSYNC_END_SHIFT 16
3003 #define TRANS_HSYNC_START_SHIFT 0
3004 #define _TRANS_VTOTAL_A 0xe000c
3005 #define TRANS_VTOTAL_SHIFT 16
3006 #define TRANS_VACTIVE_SHIFT 0
3007 #define _TRANS_VBLANK_A 0xe0010
3008 #define TRANS_VBLANK_END_SHIFT 16
3009 #define TRANS_VBLANK_START_SHIFT 0
3010 #define _TRANS_VSYNC_A 0xe0014
3011 #define TRANS_VSYNC_END_SHIFT 16
3012 #define TRANS_VSYNC_START_SHIFT 0
3014 #define _TRANSA_DATA_M1 0xe0030
3015 #define _TRANSA_DATA_N1 0xe0034
3016 #define _TRANSA_DATA_M2 0xe0038
3017 #define _TRANSA_DATA_N2 0xe003c
3018 #define _TRANSA_DP_LINK_M1 0xe0040
3019 #define _TRANSA_DP_LINK_N1 0xe0044
3020 #define _TRANSA_DP_LINK_M2 0xe0048
3021 #define _TRANSA_DP_LINK_N2 0xe004c
3023 #define _TRANS_HTOTAL_B 0xe1000
3024 #define _TRANS_HBLANK_B 0xe1004
3025 #define _TRANS_HSYNC_B 0xe1008
3026 #define _TRANS_VTOTAL_B 0xe100c
3027 #define _TRANS_VBLANK_B 0xe1010
3028 #define _TRANS_VSYNC_B 0xe1014
3030 #define TRANS_HTOTAL(pipe) _PIPE(pipe, _TRANS_HTOTAL_A, _TRANS_HTOTAL_B)
3031 #define TRANS_HBLANK(pipe) _PIPE(pipe, _TRANS_HBLANK_A, _TRANS_HBLANK_B)
3032 #define TRANS_HSYNC(pipe) _PIPE(pipe, _TRANS_HSYNC_A, _TRANS_HSYNC_B)
3033 #define TRANS_VTOTAL(pipe) _PIPE(pipe, _TRANS_VTOTAL_A, _TRANS_VTOTAL_B)
3034 #define TRANS_VBLANK(pipe) _PIPE(pipe, _TRANS_VBLANK_A, _TRANS_VBLANK_B)
3035 #define TRANS_VSYNC(pipe) _PIPE(pipe, _TRANS_VSYNC_A, _TRANS_VSYNC_B)
3037 #define _TRANSB_DATA_M1 0xe1030
3038 #define _TRANSB_DATA_N1 0xe1034
3039 #define _TRANSB_DATA_M2 0xe1038
3040 #define _TRANSB_DATA_N2 0xe103c
3041 #define _TRANSB_DP_LINK_M1 0xe1040
3042 #define _TRANSB_DP_LINK_N1 0xe1044
3043 #define _TRANSB_DP_LINK_M2 0xe1048
3044 #define _TRANSB_DP_LINK_N2 0xe104c
3046 #define TRANSDATA_M1(pipe) _PIPE(pipe, _TRANSA_DATA_M1, _TRANSB_DATA_M1)
3047 #define TRANSDATA_N1(pipe) _PIPE(pipe, _TRANSA_DATA_N1, _TRANSB_DATA_N1)
3048 #define TRANSDATA_M2(pipe) _PIPE(pipe, _TRANSA_DATA_M2, _TRANSB_DATA_M2)
3049 #define TRANSDATA_N2(pipe) _PIPE(pipe, _TRANSA_DATA_N2, _TRANSB_DATA_N2)
3050 #define TRANSDPLINK_M1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M1, _TRANSB_DP_LINK_M1)
3051 #define TRANSDPLINK_N1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N1, _TRANSB_DP_LINK_N1)
3052 #define TRANSDPLINK_M2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M2, _TRANSB_DP_LINK_M2)
3053 #define TRANSDPLINK_N2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N2, _TRANSB_DP_LINK_N2)
3055 #define _TRANSACONF 0xf0008
3056 #define _TRANSBCONF 0xf1008
3057 #define TRANSCONF(plane) _PIPE(plane, _TRANSACONF, _TRANSBCONF)
3058 #define TRANS_DISABLE (0<<31)
3059 #define TRANS_ENABLE (1<<31)
3060 #define TRANS_STATE_MASK (1<<30)
3061 #define TRANS_STATE_DISABLE (0<<30)
3062 #define TRANS_STATE_ENABLE (1<<30)
3063 #define TRANS_FSYNC_DELAY_HB1 (0<<27)
3064 #define TRANS_FSYNC_DELAY_HB2 (1<<27)
3065 #define TRANS_FSYNC_DELAY_HB3 (2<<27)
3066 #define TRANS_FSYNC_DELAY_HB4 (3<<27)
3067 #define TRANS_DP_AUDIO_ONLY (1<<26)
3068 #define TRANS_DP_VIDEO_AUDIO (0<<26)
3069 #define TRANS_PROGRESSIVE (0<<21)
3070 #define TRANS_8BPC (0<<5)
3071 #define TRANS_10BPC (1<<5)
3072 #define TRANS_6BPC (2<<5)
3073 #define TRANS_12BPC (3<<5)
3075 #define _TRANSA_CHICKEN2 0xf0064
3076 #define _TRANSB_CHICKEN2 0xf1064
3077 #define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
3078 #define TRANS_AUTOTRAIN_GEN_STALL_DIS (1<<31)
3080 #define SOUTH_CHICKEN2 0xc2004
3081 #define DPLS_EDP_PPS_FIX_DIS (1<<0)
3083 #define _FDI_RXA_CHICKEN 0xc200c
3084 #define _FDI_RXB_CHICKEN 0xc2010
3085 #define FDI_RX_PHASE_SYNC_POINTER_OVR (1<<1)
3086 #define FDI_RX_PHASE_SYNC_POINTER_EN (1<<0)
3087 #define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN)
3089 #define SOUTH_DSPCLK_GATE_D 0xc2020
3090 #define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29)
3093 #define _FDI_TXA_CTL 0x60100
3094 #define _FDI_TXB_CTL 0x61100
3095 #define FDI_TX_CTL(pipe) _PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL)
3096 #define FDI_TX_DISABLE (0<<31)
3097 #define FDI_TX_ENABLE (1<<31)
3098 #define FDI_LINK_TRAIN_PATTERN_1 (0<<28)
3099 #define FDI_LINK_TRAIN_PATTERN_2 (1<<28)
3100 #define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28)
3101 #define FDI_LINK_TRAIN_NONE (3<<28)
3102 #define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25)
3103 #define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25)
3104 #define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25)
3105 #define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25)
3106 #define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22)
3107 #define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22)
3108 #define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22)
3109 #define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22)
3110 /* ILK always use 400mV 0dB for voltage swing and pre-emphasis level.
3111 SNB has different settings. */
3112 /* SNB A-stepping */
3113 #define FDI_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22)
3114 #define FDI_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22)
3115 #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22)
3116 #define FDI_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22)
3117 /* SNB B-stepping */
3118 #define FDI_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22)
3119 #define FDI_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22)
3120 #define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
3121 #define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
3122 #define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22)
3123 #define FDI_DP_PORT_WIDTH_X1 (0<<19)
3124 #define FDI_DP_PORT_WIDTH_X2 (1<<19)
3125 #define FDI_DP_PORT_WIDTH_X3 (2<<19)
3126 #define FDI_DP_PORT_WIDTH_X4 (3<<19)
3127 #define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18)
3128 /* Ironlake: hardwired to 1 */
3129 #define FDI_TX_PLL_ENABLE (1<<14)
3131 /* Ivybridge has different bits for lolz */
3132 #define FDI_LINK_TRAIN_PATTERN_1_IVB (0<<8)
3133 #define FDI_LINK_TRAIN_PATTERN_2_IVB (1<<8)
3134 #define FDI_LINK_TRAIN_PATTERN_IDLE_IVB (2<<8)
3135 #define FDI_LINK_TRAIN_NONE_IVB (3<<8)
3137 /* both Tx and Rx */
3138 #define FDI_LINK_TRAIN_AUTO (1<<10)
3139 #define FDI_SCRAMBLING_ENABLE (0<<7)
3140 #define FDI_SCRAMBLING_DISABLE (1<<7)
3142 /* FDI_RX, FDI_X is hard-wired to Transcoder_X */
3143 #define _FDI_RXA_CTL 0xf000c
3144 #define _FDI_RXB_CTL 0xf100c
3145 #define FDI_RX_CTL(pipe) _PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL)
3146 #define FDI_RX_ENABLE (1<<31)
3147 /* train, dp width same as FDI_TX */
3148 #define FDI_FS_ERRC_ENABLE (1<<27)
3149 #define FDI_FE_ERRC_ENABLE (1<<26)
3150 #define FDI_DP_PORT_WIDTH_X8 (7<<19)
3151 #define FDI_8BPC (0<<16)
3152 #define FDI_10BPC (1<<16)
3153 #define FDI_6BPC (2<<16)
3154 #define FDI_12BPC (3<<16)
3155 #define FDI_LINK_REVERSE_OVERWRITE (1<<15)
3156 #define FDI_DMI_LINK_REVERSE_MASK (1<<14)
3157 #define FDI_RX_PLL_ENABLE (1<<13)
3158 #define FDI_FS_ERR_CORRECT_ENABLE (1<<11)
3159 #define FDI_FE_ERR_CORRECT_ENABLE (1<<10)
3160 #define FDI_FS_ERR_REPORT_ENABLE (1<<9)
3161 #define FDI_FE_ERR_REPORT_ENABLE (1<<8)
3162 #define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6)
3163 #define FDI_PCDCLK (1<<4)
3165 #define FDI_AUTO_TRAINING (1<<10)
3166 #define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8)
3167 #define FDI_LINK_TRAIN_PATTERN_2_CPT (1<<8)
3168 #define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8)
3169 #define FDI_LINK_TRAIN_NORMAL_CPT (3<<8)
3170 #define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8)
3172 #define _FDI_RXA_MISC 0xf0010
3173 #define _FDI_RXB_MISC 0xf1010
3174 #define _FDI_RXA_TUSIZE1 0xf0030
3175 #define _FDI_RXA_TUSIZE2 0xf0038
3176 #define _FDI_RXB_TUSIZE1 0xf1030
3177 #define _FDI_RXB_TUSIZE2 0xf1038
3178 #define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC)
3179 #define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1)
3180 #define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2)
3182 /* FDI_RX interrupt register format */
3183 #define FDI_RX_INTER_LANE_ALIGN (1<<10)
3184 #define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */
3185 #define FDI_RX_BIT_LOCK (1<<8) /* train 1 */
3186 #define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7)
3187 #define FDI_RX_FS_CODE_ERR (1<<6)
3188 #define FDI_RX_FE_CODE_ERR (1<<5)
3189 #define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4)
3190 #define FDI_RX_HDCP_LINK_FAIL (1<<3)
3191 #define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2)
3192 #define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1)
3193 #define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0)
3195 #define _FDI_RXA_IIR 0xf0014
3196 #define _FDI_RXA_IMR 0xf0018
3197 #define _FDI_RXB_IIR 0xf1014
3198 #define _FDI_RXB_IMR 0xf1018
3199 #define FDI_RX_IIR(pipe) _PIPE(pipe, _FDI_RXA_IIR, _FDI_RXB_IIR)
3200 #define FDI_RX_IMR(pipe) _PIPE(pipe, _FDI_RXA_IMR, _FDI_RXB_IMR)
3202 #define FDI_PLL_CTL_1 0xfe000
3203 #define FDI_PLL_CTL_2 0xfe004
3206 #define PCH_ADPA 0xe1100
3207 #define ADPA_TRANS_SELECT_MASK (1<<30)
3208 #define ADPA_TRANS_A_SELECT 0
3209 #define ADPA_TRANS_B_SELECT (1<<30)
3210 #define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */
3211 #define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24)
3212 #define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24)
3213 #define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24)
3214 #define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24)
3215 #define ADPA_CRT_HOTPLUG_ENABLE (1<<23)
3216 #define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22)
3217 #define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22)
3218 #define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21)
3219 #define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21)
3220 #define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20)
3221 #define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20)
3222 #define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18)
3223 #define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18)
3224 #define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18)
3225 #define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18)
3226 #define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17)
3227 #define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17)
3228 #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
3230 #define ADPA_PIPE_ENABLED(V, P) \
3231 (((V) & (ADPA_TRANS_SELECT_MASK | ADPA_DAC_ENABLE)) == ((P) << 30 | ADPA_DAC_ENABLE))
3234 #define HDMIB 0xe1140
3235 #define PORT_ENABLE (1 << 31)
3236 #define TRANSCODER_A (0)
3237 #define TRANSCODER_B (1 << 30)
3238 #define TRANSCODER_MASK (1 << 30)
3239 #define COLOR_FORMAT_8bpc (0)
3240 #define COLOR_FORMAT_12bpc (3 << 26)
3241 #define SDVOB_HOTPLUG_ENABLE (1 << 23)
3242 #define SDVO_ENCODING (0)
3243 #define TMDS_ENCODING (2 << 10)
3244 #define NULL_PACKET_VSYNC_ENABLE (1 << 9)
3246 #define HDMI_MODE_SELECT (1 << 9)
3247 #define DVI_MODE_SELECT (0)
3248 #define SDVOB_BORDER_ENABLE (1 << 7)
3249 #define AUDIO_ENABLE (1 << 6)
3250 #define VSYNC_ACTIVE_HIGH (1 << 4)
3251 #define HSYNC_ACTIVE_HIGH (1 << 3)
3252 #define PORT_DETECTED (1 << 2)
3254 #define HDMI_PIPE_ENABLED(V, P) \
3255 (((V) & (TRANSCODER_MASK | PORT_ENABLE)) == ((P) << 30 | PORT_ENABLE))
3257 /* PCH SDVOB multiplex with HDMIB */
3258 #define PCH_SDVOB HDMIB
3260 #define HDMIC 0xe1150
3261 #define HDMID 0xe1160
3263 #define PCH_LVDS 0xe1180
3264 #define LVDS_DETECTED (1 << 1)
3266 #define BLC_PWM_CPU_CTL2 0x48250
3267 #define PWM_ENABLE (1 << 31)
3268 #define PWM_PIPE_A (0 << 29)
3269 #define PWM_PIPE_B (1 << 29)
3270 #define BLC_PWM_CPU_CTL 0x48254
3272 #define BLC_PWM_PCH_CTL1 0xc8250
3273 #define PWM_PCH_ENABLE (1 << 31)
3274 #define PWM_POLARITY_ACTIVE_LOW (1 << 29)
3275 #define PWM_POLARITY_ACTIVE_HIGH (0 << 29)
3276 #define PWM_POLARITY_ACTIVE_LOW2 (1 << 28)
3277 #define PWM_POLARITY_ACTIVE_HIGH2 (0 << 28)
3279 #define BLC_PWM_PCH_CTL2 0xc8254
3281 #define PCH_PP_STATUS 0xc7200
3282 #define PCH_PP_CONTROL 0xc7204
3283 #define PANEL_UNLOCK_REGS (0xabcd << 16)
3284 #define EDP_FORCE_VDD (1 << 3)
3285 #define EDP_BLC_ENABLE (1 << 2)
3286 #define PANEL_POWER_RESET (1 << 1)
3287 #define PANEL_POWER_OFF (0 << 0)
3288 #define PANEL_POWER_ON (1 << 0)
3289 #define PCH_PP_ON_DELAYS 0xc7208
3290 #define EDP_PANEL (1 << 30)
3291 #define PCH_PP_OFF_DELAYS 0xc720c
3292 #define PCH_PP_DIVISOR 0xc7210
3294 #define PCH_DP_B 0xe4100
3295 #define PCH_DPB_AUX_CH_CTL 0xe4110
3296 #define PCH_DPB_AUX_CH_DATA1 0xe4114
3297 #define PCH_DPB_AUX_CH_DATA2 0xe4118
3298 #define PCH_DPB_AUX_CH_DATA3 0xe411c
3299 #define PCH_DPB_AUX_CH_DATA4 0xe4120
3300 #define PCH_DPB_AUX_CH_DATA5 0xe4124
3302 #define PCH_DP_C 0xe4200
3303 #define PCH_DPC_AUX_CH_CTL 0xe4210
3304 #define PCH_DPC_AUX_CH_DATA1 0xe4214
3305 #define PCH_DPC_AUX_CH_DATA2 0xe4218
3306 #define PCH_DPC_AUX_CH_DATA3 0xe421c
3307 #define PCH_DPC_AUX_CH_DATA4 0xe4220
3308 #define PCH_DPC_AUX_CH_DATA5 0xe4224
3310 #define PCH_DP_D 0xe4300
3311 #define PCH_DPD_AUX_CH_CTL 0xe4310
3312 #define PCH_DPD_AUX_CH_DATA1 0xe4314
3313 #define PCH_DPD_AUX_CH_DATA2 0xe4318
3314 #define PCH_DPD_AUX_CH_DATA3 0xe431c
3315 #define PCH_DPD_AUX_CH_DATA4 0xe4320
3316 #define PCH_DPD_AUX_CH_DATA5 0xe4324
3319 #define PORT_TRANS_A_SEL_CPT 0
3320 #define PORT_TRANS_B_SEL_CPT (1<<29)
3321 #define PORT_TRANS_C_SEL_CPT (2<<29)
3322 #define PORT_TRANS_SEL_MASK (3<<29)
3324 #define TRANS_DP_CTL_A 0xe0300
3325 #define TRANS_DP_CTL_B 0xe1300
3326 #define TRANS_DP_CTL_C 0xe2300
3327 #define TRANS_DP_CTL(pipe) (TRANS_DP_CTL_A + (pipe) * 0x01000)
3328 #define TRANS_DP_OUTPUT_ENABLE (1<<31)
3329 #define TRANS_DP_PORT_SEL_B (0<<29)
3330 #define TRANS_DP_PORT_SEL_C (1<<29)
3331 #define TRANS_DP_PORT_SEL_D (2<<29)
3332 #define TRANS_DP_PORT_SEL_NONE (3<<29)
3333 #define TRANS_DP_PORT_SEL_MASK (3<<29)
3334 #define TRANS_DP_AUDIO_ONLY (1<<26)
3335 #define TRANS_DP_ENH_FRAMING (1<<18)
3336 #define TRANS_DP_8BPC (0<<9)
3337 #define TRANS_DP_10BPC (1<<9)
3338 #define TRANS_DP_6BPC (2<<9)
3339 #define TRANS_DP_12BPC (3<<9)
3340 #define TRANS_DP_BPC_MASK (3<<9)
3341 #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
3342 #define TRANS_DP_VSYNC_ACTIVE_LOW 0
3343 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
3344 #define TRANS_DP_HSYNC_ACTIVE_LOW 0
3345 #define TRANS_DP_SYNC_MASK (3<<3)
3347 /* SNB eDP training params */
3348 /* SNB A-stepping */
3349 #define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22)
3350 #define EDP_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22)
3351 #define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22)
3352 #define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22)
3353 /* SNB B-stepping */
3354 #define EDP_LINK_TRAIN_400_600MV_0DB_SNB_B (0x0<<22)
3355 #define EDP_LINK_TRAIN_400MV_3_5DB_SNB_B (0x1<<22)
3356 #define EDP_LINK_TRAIN_400_600MV_6DB_SNB_B (0x3a<<22)
3357 #define EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B (0x39<<22)
3358 #define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22)
3359 #define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22)
3361 #define FORCEWAKE 0xA18C
3362 #define FORCEWAKE_ACK 0x130090
3364 #define GT_FIFO_FREE_ENTRIES 0x120008
3366 #define GEN6_RPNSWREQ 0xA008
3367 #define GEN6_TURBO_DISABLE (1<<31)
3368 #define GEN6_FREQUENCY(x) ((x)<<25)
3369 #define GEN6_OFFSET(x) ((x)<<19)
3370 #define GEN6_AGGRESSIVE_TURBO (0<<15)
3371 #define GEN6_RC_VIDEO_FREQ 0xA00C
3372 #define GEN6_RC_CONTROL 0xA090
3373 #define GEN6_RC_CTL_RC6pp_ENABLE (1<<16)
3374 #define GEN6_RC_CTL_RC6p_ENABLE (1<<17)
3375 #define GEN6_RC_CTL_RC6_ENABLE (1<<18)
3376 #define GEN6_RC_CTL_RC1e_ENABLE (1<<20)
3377 #define GEN6_RC_CTL_RC7_ENABLE (1<<22)
3378 #define GEN6_RC_CTL_EI_MODE(x) ((x)<<27)
3379 #define GEN6_RC_CTL_HW_ENABLE (1<<31)
3380 #define GEN6_RP_DOWN_TIMEOUT 0xA010
3381 #define GEN6_RP_INTERRUPT_LIMITS 0xA014
3382 #define GEN6_RPSTAT1 0xA01C
3383 #define GEN6_CAGF_SHIFT 8
3384 #define GEN6_CAGF_MASK (0x7f << GEN6_CAGF_SHIFT)
3385 #define GEN6_RP_CONTROL 0xA024
3386 #define GEN6_RP_MEDIA_TURBO (1<<11)
3387 #define GEN6_RP_USE_NORMAL_FREQ (1<<9)
3388 #define GEN6_RP_MEDIA_IS_GFX (1<<8)
3389 #define GEN6_RP_ENABLE (1<<7)
3390 #define GEN6_RP_UP_IDLE_MIN (0x1<<3)
3391 #define GEN6_RP_UP_BUSY_AVG (0x2<<3)
3392 #define GEN6_RP_UP_BUSY_CONT (0x4<<3)
3393 #define GEN6_RP_DOWN_IDLE_CONT (0x1<<0)
3394 #define GEN6_RP_UP_THRESHOLD 0xA02C
3395 #define GEN6_RP_DOWN_THRESHOLD 0xA030
3396 #define GEN6_RP_CUR_UP_EI 0xA050
3397 #define GEN6_CURICONT_MASK 0xffffff
3398 #define GEN6_RP_CUR_UP 0xA054
3399 #define GEN6_CURBSYTAVG_MASK 0xffffff
3400 #define GEN6_RP_PREV_UP 0xA058
3401 #define GEN6_RP_CUR_DOWN_EI 0xA05C
3402 #define GEN6_CURIAVG_MASK 0xffffff
3403 #define GEN6_RP_CUR_DOWN 0xA060
3404 #define GEN6_RP_PREV_DOWN 0xA064
3405 #define GEN6_RP_UP_EI 0xA068
3406 #define GEN6_RP_DOWN_EI 0xA06C
3407 #define GEN6_RP_IDLE_HYSTERSIS 0xA070
3408 #define GEN6_RC_STATE 0xA094
3409 #define GEN6_RC1_WAKE_RATE_LIMIT 0xA098
3410 #define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C
3411 #define GEN6_RC6pp_WAKE_RATE_LIMIT 0xA0A0
3412 #define GEN6_RC_EVALUATION_INTERVAL 0xA0A8
3413 #define GEN6_RC_IDLE_HYSTERSIS 0xA0AC
3414 #define GEN6_RC_SLEEP 0xA0B0
3415 #define GEN6_RC1e_THRESHOLD 0xA0B4
3416 #define GEN6_RC6_THRESHOLD 0xA0B8
3417 #define GEN6_RC6p_THRESHOLD 0xA0BC
3418 #define GEN6_RC6pp_THRESHOLD 0xA0C0
3419 #define GEN6_PMINTRMSK 0xA168
3421 #define GEN6_PMISR 0x44020
3422 #define GEN6_PMIMR 0x44024 /* rps_lock */
3423 #define GEN6_PMIIR 0x44028
3424 #define GEN6_PMIER 0x4402C
3425 #define GEN6_PM_MBOX_EVENT (1<<25)
3426 #define GEN6_PM_THERMAL_EVENT (1<<24)
3427 #define GEN6_PM_RP_DOWN_TIMEOUT (1<<6)
3428 #define GEN6_PM_RP_UP_THRESHOLD (1<<5)
3429 #define GEN6_PM_RP_DOWN_THRESHOLD (1<<4)
3430 #define GEN6_PM_RP_UP_EI_EXPIRED (1<<2)
3431 #define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1)
3432 #define GEN6_PM_DEFERRED_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \
3433 GEN6_PM_RP_DOWN_THRESHOLD | \
3434 GEN6_PM_RP_DOWN_TIMEOUT)
3436 #define GEN6_PCODE_MAILBOX 0x138124
3437 #define GEN6_PCODE_READY (1<<31)
3438 #define GEN6_READ_OC_PARAMS 0xc
3439 #define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x9
3440 #define GEN6_PCODE_DATA 0x138128
3442 #endif /* _I915_REG_H_ */
This page took 0.160476 seconds and 5 git commands to generate.
projects / deliverable / linux.git / blob