2 * Copyright © 2006 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24 * Eric Anholt <eric@anholt.net>
34 u8 signature
[20]; /**< Always starts with 'VBT$' */
35 u16 version
; /**< decimal */
36 u16 header_size
; /**< in bytes */
37 u16 vbt_size
; /**< in bytes */
40 u32 bdb_offset
; /**< from beginning of VBT */
41 u32 aim_offset
[4]; /**< from beginning of VBT */
45 u8 signature
[16]; /**< Always 'BIOS_DATA_BLOCK' */
46 u16 version
; /**< decimal */
47 u16 header_size
; /**< in bytes */
48 u16 bdb_size
; /**< in bytes */
51 /* strictly speaking, this is a "skip" block, but it has interesting info */
53 u8 type
; /* 0 == desktop, 1 == mobile */
58 u8 rsvd2
:6; /* finish byte */
65 u8 rsvd4
; /* popup memory size */
67 u8 rsvd5
; /* is crt already on ddc2 */
71 * There are several types of BIOS data blocks (BDBs), each block has
72 * an ID and size in the first 3 bytes (ID in first, size in next 2).
73 * Known types are listed below.
75 #define BDB_GENERAL_FEATURES 1
76 #define BDB_GENERAL_DEFINITIONS 2
77 #define BDB_OLD_TOGGLE_LIST 3
78 #define BDB_MODE_SUPPORT_LIST 4
79 #define BDB_GENERIC_MODE_TABLE 5
80 #define BDB_EXT_MMIO_REGS 6
82 #define BDB_SWF_MMIO 8
84 #define BDB_MODE_REMOVAL_TABLE 10
85 #define BDB_CHILD_DEVICE_TABLE 11
86 #define BDB_DRIVER_FEATURES 12
87 #define BDB_DRIVER_PERSISTENCE 13
88 #define BDB_EXT_TABLE_PTRS 14
89 #define BDB_DOT_CLOCK_OVERRIDE 15
90 #define BDB_DISPLAY_SELECT 16
92 #define BDB_DRIVER_ROTATION 18
93 #define BDB_DISPLAY_REMOVE 19
94 #define BDB_OEM_CUSTOM 20
95 #define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */
96 #define BDB_SDVO_LVDS_OPTIONS 22
97 #define BDB_SDVO_PANEL_DTDS 23
98 #define BDB_SDVO_LVDS_PNP_IDS 24
99 #define BDB_SDVO_LVDS_POWER_SEQ 25
100 #define BDB_TV_OPTIONS 26
102 #define BDB_LVDS_OPTIONS 40
103 #define BDB_LVDS_LFP_DATA_PTRS 41
104 #define BDB_LVDS_LFP_DATA 42
105 #define BDB_LVDS_BACKLIGHT 43
106 #define BDB_LVDS_POWER 44
107 #define BDB_MIPI_CONFIG 52
108 #define BDB_MIPI_SEQUENCE 53
109 #define BDB_SKIP 254 /* VBIOS private block, ignore */
111 struct bdb_general_features
{
120 u8 download_ext_vbt
:1;
123 u8 enable_lfp_on_override
:1;
124 u8 disable_ssc_ddt
:1;
126 u8 display_clock_mode
:1;
127 u8 rsvd8
:1; /* finish byte */
130 u8 disable_smooth_vision
:1;
133 u8 fdi_rx_polarity_inverted
:1;
134 u8 rsvd10
:4; /* finish byte */
137 u8 legacy_monitor_detect
;
140 u8 int_crt_support
:1;
142 u8 int_efp_support
:1;
143 u8 dp_ssc_enb
:1; /* PCH attached eDP supports SSC */
144 u8 dp_ssc_freq
:1; /* SSC freq for PCH attached eDP */
145 u8 rsvd11
:3; /* finish byte */
149 #define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */
150 #define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */
151 #define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */
152 #define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */
155 #define DEVICE_TYPE_NONE 0x00
156 #define DEVICE_TYPE_CRT 0x01
157 #define DEVICE_TYPE_TV 0x09
158 #define DEVICE_TYPE_EFP 0x12
159 #define DEVICE_TYPE_LFP 0x22
161 #define DEVICE_TYPE_CRT_DPMS 0x6001
162 #define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001
163 #define DEVICE_TYPE_TV_COMPOSITE 0x0209
164 #define DEVICE_TYPE_TV_MACROVISION 0x0289
165 #define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c
166 #define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609
167 #define DEVICE_TYPE_TV_SCART 0x0209
168 #define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
169 #define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012
170 #define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052
171 #define DEVICE_TYPE_EFP_DVI_I 0x6053
172 #define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152
173 #define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2
174 #define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062
175 #define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162
176 #define DEVICE_TYPE_LFP_PANELLINK 0x5012
177 #define DEVICE_TYPE_LFP_CMOS_PWR 0x5042
178 #define DEVICE_TYPE_LFP_LVDS_PWR 0x5062
179 #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162
180 #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2
182 #define DEVICE_CFG_NONE 0x00
183 #define DEVICE_CFG_12BIT_DVOB 0x01
184 #define DEVICE_CFG_12BIT_DVOC 0x02
185 #define DEVICE_CFG_24BIT_DVOBC 0x09
186 #define DEVICE_CFG_24BIT_DVOCB 0x0a
187 #define DEVICE_CFG_DUAL_DVOB 0x11
188 #define DEVICE_CFG_DUAL_DVOC 0x12
189 #define DEVICE_CFG_DUAL_DVOBC 0x13
190 #define DEVICE_CFG_DUAL_LINK_DVOBC 0x19
191 #define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a
193 #define DEVICE_WIRE_NONE 0x00
194 #define DEVICE_WIRE_DVOB 0x01
195 #define DEVICE_WIRE_DVOC 0x02
196 #define DEVICE_WIRE_DVOBC 0x03
197 #define DEVICE_WIRE_DVOBB 0x05
198 #define DEVICE_WIRE_DVOCC 0x06
199 #define DEVICE_WIRE_DVOB_MASTER 0x0d
200 #define DEVICE_WIRE_DVOC_MASTER 0x0e
202 #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
203 #define DEVICE_PORT_DVOB 0x01
204 #define DEVICE_PORT_DVOC 0x02
206 /* We used to keep this struct but without any version control. We should avoid
207 * using it in the future, but it should be safe to keep using it in the old
209 struct old_child_dev_config
{
212 u8 device_id
[10]; /* ascii string */
214 u8 dvo_port
; /* See Device_PORT_* above */
219 u8 dvo_cfg
; /* See DEVICE_CFG_* above */
225 u8 dvo_wiring
;/* See DEVICE_WIRE_* above */
231 /* This one contains field offsets that are known to be common for all BDB
232 * versions. Notice that the meaning of the contents contents may still change,
233 * but at least the offsets are consistent. */
235 /* Definitions for flags_1 */
236 #define IBOOST_ENABLE (1<<3)
238 struct common_child_dev_config
{
253 /* This field changes depending on the BDB version, so the most reliable way to
254 * read it is by checking the BDB version and reading the raw pointer. */
255 union child_device_config
{
256 /* This one is safe to be used anywhere, but the code should still check
257 * the BDB version. */
259 /* This one should only be kept for legacy code. */
260 struct old_child_dev_config old
;
261 /* This one should also be safe to use anywhere, even without version
263 struct common_child_dev_config common
;
266 struct bdb_general_definitions
{
268 u8 crt_ddc_gmbus_pin
;
272 u8 skip_boot_crt_detect
:1;
274 u8 rsvd1
:5; /* finish byte */
276 /* boot device bits */
282 * If TV is present, it'll be at devices[0].
283 * LVDS will be next, either devices[0] or [1], if present.
284 * On some platforms the number of device is 6. But could be as few as
285 * 4 if both TV and LVDS are missing.
286 * And the device num is related with the size of general definition
287 * block. It is obtained by using the following formula:
288 * number = (block_size - sizeof(bdb_general_definitions))/
289 * defs->child_dev_size;
294 /* Mask for DRRS / Panel Channel / SSC / BLT control bits extraction */
295 #define MODE_MASK 0x3
297 struct bdb_lvds_options
{
300 /* LVDS capabilities, stored in a dword */
302 u8 pfit_text_mode_enhanced
:1;
303 u8 pfit_gfx_mode_enhanced
:1;
304 u8 pfit_ratio_auto
:1;
309 /* LVDS Panel channel bits stored here */
310 u32 lvds_panel_channel_bits
;
311 /* LVDS SSC (Spread Spectrum Clock) bits stored here. */
315 /* Panel color depth defined here */
316 u16 panel_color_depth
;
317 /* LVDS panel type bits stored here */
318 u32 dps_panel_type_bits
;
319 /* LVDS backlight control type bits stored here */
320 u32 blt_control_type_bits
;
323 /* LFP pointer table contains entries to the struct below */
324 struct bdb_lvds_lfp_data_ptr
{
325 u16 fp_timing_offset
; /* offsets are from start of bdb */
327 u16 dvo_timing_offset
;
329 u16 panel_pnp_id_offset
;
333 struct bdb_lvds_lfp_data_ptrs
{
334 u8 lvds_entries
; /* followed by one or more lvds_data_ptr structs */
335 struct bdb_lvds_lfp_data_ptr ptr
[16];
338 /* LFP data has 3 blocks per entry */
339 struct lvds_fp_timing
{
349 u32 pp_cycle_reg_val
;
355 struct lvds_dvo_timing
{
356 u16 clock
; /**< In 10khz */
366 u8 hsync_pulse_width
;
367 u8 vsync_pulse_width
:4;
391 struct bdb_lvds_lfp_data_entry
{
392 struct lvds_fp_timing fp_timing
;
393 struct lvds_dvo_timing dvo_timing
;
394 struct lvds_pnp_id pnp_id
;
397 struct bdb_lvds_lfp_data
{
398 struct bdb_lvds_lfp_data_entry data
[16];
401 #define BDB_BACKLIGHT_TYPE_NONE 0
402 #define BDB_BACKLIGHT_TYPE_PWM 2
404 struct bdb_lfp_backlight_data_entry
{
414 struct bdb_lfp_backlight_data
{
416 struct bdb_lfp_backlight_data_entry data
[16];
420 struct aimdb_header
{
424 u16 aimdb_header_size
;
433 struct vch_panel_data
{
434 u16 fp_timing_offset
;
436 u16 dvo_timing_offset
;
438 u16 text_fitting_offset
;
439 u8 text_fitting_size
;
440 u16 graphics_fitting_offset
;
441 u8 graphics_fitting_size
;
445 struct aimdb_block aimdb_block
;
446 struct vch_panel_data panels
[16];
449 struct bdb_sdvo_lvds_options
{
451 u8 h40_set_panel_type
;
456 u8 sclalarcoeff_tab_row_num
;
457 u8 sclalarcoeff_tab_row_size
;
459 u8 panel_misc_bits_1
;
460 u8 panel_misc_bits_2
;
461 u8 panel_misc_bits_3
;
462 u8 panel_misc_bits_4
;
466 #define BDB_DRIVER_FEATURE_NO_LVDS 0
467 #define BDB_DRIVER_FEATURE_INT_LVDS 1
468 #define BDB_DRIVER_FEATURE_SDVO_LVDS 2
469 #define BDB_DRIVER_FEATURE_EDP 3
471 struct bdb_driver_features
{
472 u8 boot_dev_algorithm
:1;
473 u8 block_display_switch
:1;
474 u8 allow_display_switch
:1;
478 u8 sprite_in_clone
:1;
484 u8 boot_mode_refresh
;
486 u16 enable_lfp_primary
:1;
487 u16 selective_mode_pruning
:1;
488 u16 dual_frequency
:1;
489 u16 render_clock_freq
:1; /* 0: high freq; 1: low freq */
490 u16 nt_clone_support
:1;
491 u16 power_scheme_ui
:1; /* 0: CUI; 1: 3rd party */
492 u16 sprite_display_assign
:1; /* 0: secondary; 1: primary */
493 u16 cui_aspect_scaling
:1;
494 u16 preserve_aspect_ratio
:1;
495 u16 sdvo_device_power_down
:1;
503 u16 legacy_crt_max_x
;
504 u16 legacy_crt_max_y
;
505 u8 legacy_crt_max_refresh
;
508 u8 custom_vbt_version
;
509 /* Driver features data block */
513 u16 bltclt_enabled
:1;
522 u16 pc_feature_valid
:1;
528 #define EDP_RATE_1_62 0
529 #define EDP_RATE_2_7 1
533 #define EDP_PREEMPHASIS_NONE 0
534 #define EDP_PREEMPHASIS_3_5dB 1
535 #define EDP_PREEMPHASIS_6dB 2
536 #define EDP_PREEMPHASIS_9_5dB 3
537 #define EDP_VSWING_0_4V 0
538 #define EDP_VSWING_0_6V 1
539 #define EDP_VSWING_0_8V 2
540 #define EDP_VSWING_1_2V 3
542 struct edp_power_seq
{
550 struct edp_link_params
{
558 struct edp_power_seq power_seqs
[16];
560 struct edp_link_params link_params
[16];
561 u32 sdrrs_msa_timing_delay
;
563 /* ith bit indicates enabled/disabled for (i+1)th panel */
565 u16 edp_t3_optimization
;
566 u64 edp_vswing_preemph
; /* v173 */
572 u8 require_aux_to_wakeup
:1;
573 u8 feature_bits_rsvd
:6;
578 u8 wait_times_rsvd
:1;
580 /* TP wake up time in multiple of 100 */
582 u16 tp2_tp3_wakeup_time
;
586 struct psr_table psr_table
[16];
589 void intel_setup_bios(struct drm_device
*dev
);
590 int intel_parse_bios(struct drm_device
*dev
);
593 * Driver<->VBIOS interaction occurs through scratch bits in
597 /* GR18 bits are set on display switch and hotkey events */
598 #define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */
599 #define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */
600 #define GR18_HK_NONE (0x0<<3)
601 #define GR18_HK_LFP_STRETCH (0x1<<3)
602 #define GR18_HK_TOGGLE_DISP (0x2<<3)
603 #define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */
604 #define GR18_HK_POPUP_DISABLED (0x6<<3)
605 #define GR18_HK_POPUP_ENABLED (0x7<<3)
606 #define GR18_HK_PFIT (0x8<<3)
607 #define GR18_HK_APM_CHANGE (0xa<<3)
608 #define GR18_HK_MULTIPLE (0xc<<3)
609 #define GR18_USER_INT_EN (1<<2)
610 #define GR18_A0000_FLUSH_EN (1<<1)
611 #define GR18_SMM_EN (1<<0)
613 /* Set by driver, cleared by VBIOS */
614 #define SWF00_YRES_SHIFT 16
615 #define SWF00_XRES_SHIFT 0
616 #define SWF00_RES_MASK 0xffff
618 /* Set by VBIOS at boot time and driver at runtime */
619 #define SWF01_TV2_FORMAT_SHIFT 8
620 #define SWF01_TV1_FORMAT_SHIFT 0
621 #define SWF01_TV_FORMAT_MASK 0xffff
623 #define SWF10_VBIOS_BLC_I2C_EN (1<<29)
624 #define SWF10_GTT_OVERRIDE_EN (1<<28)
625 #define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */
626 #define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
627 #define SWF10_OLD_TOGGLE 0x0
628 #define SWF10_TOGGLE_LIST_1 0x1
629 #define SWF10_TOGGLE_LIST_2 0x2
630 #define SWF10_TOGGLE_LIST_3 0x3
631 #define SWF10_TOGGLE_LIST_4 0x4
632 #define SWF10_PANNING_EN (1<<23)
633 #define SWF10_DRIVER_LOADED (1<<22)
634 #define SWF10_EXTENDED_DESKTOP (1<<21)
635 #define SWF10_EXCLUSIVE_MODE (1<<20)
636 #define SWF10_OVERLAY_EN (1<<19)
637 #define SWF10_PLANEB_HOLDOFF (1<<18)
638 #define SWF10_PLANEA_HOLDOFF (1<<17)
639 #define SWF10_VGA_HOLDOFF (1<<16)
640 #define SWF10_ACTIVE_DISP_MASK 0xffff
641 #define SWF10_PIPEB_LFP2 (1<<15)
642 #define SWF10_PIPEB_EFP2 (1<<14)
643 #define SWF10_PIPEB_TV2 (1<<13)
644 #define SWF10_PIPEB_CRT2 (1<<12)
645 #define SWF10_PIPEB_LFP (1<<11)
646 #define SWF10_PIPEB_EFP (1<<10)
647 #define SWF10_PIPEB_TV (1<<9)
648 #define SWF10_PIPEB_CRT (1<<8)
649 #define SWF10_PIPEA_LFP2 (1<<7)
650 #define SWF10_PIPEA_EFP2 (1<<6)
651 #define SWF10_PIPEA_TV2 (1<<5)
652 #define SWF10_PIPEA_CRT2 (1<<4)
653 #define SWF10_PIPEA_LFP (1<<3)
654 #define SWF10_PIPEA_EFP (1<<2)
655 #define SWF10_PIPEA_TV (1<<1)
656 #define SWF10_PIPEA_CRT (1<<0)
658 #define SWF11_MEMORY_SIZE_SHIFT 16
659 #define SWF11_SV_TEST_EN (1<<15)
660 #define SWF11_IS_AGP (1<<14)
661 #define SWF11_DISPLAY_HOLDOFF (1<<13)
662 #define SWF11_DPMS_REDUCED (1<<12)
663 #define SWF11_IS_VBE_MODE (1<<11)
664 #define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */
665 #define SWF11_DPMS_MASK 0x07
666 #define SWF11_DPMS_OFF (1<<2)
667 #define SWF11_DPMS_SUSPEND (1<<1)
668 #define SWF11_DPMS_STANDBY (1<<0)
669 #define SWF11_DPMS_ON 0
671 #define SWF14_GFX_PFIT_EN (1<<31)
672 #define SWF14_TEXT_PFIT_EN (1<<30)
673 #define SWF14_LID_STATUS_CLOSED (1<<29) /* 0 here means open */
674 #define SWF14_POPUP_EN (1<<28)
675 #define SWF14_DISPLAY_HOLDOFF (1<<27)
676 #define SWF14_DISP_DETECT_EN (1<<26)
677 #define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
678 #define SWF14_DRIVER_STATUS (1<<24)
679 #define SWF14_OS_TYPE_WIN9X (1<<23)
680 #define SWF14_OS_TYPE_WINNT (1<<22)
682 #define SWF14_PM_TYPE_MASK 0x00070000
683 #define SWF14_PM_ACPI_VIDEO (0x4 << 16)
684 #define SWF14_PM_ACPI (0x3 << 16)
685 #define SWF14_PM_APM_12 (0x2 << 16)
686 #define SWF14_PM_APM_11 (0x1 << 16)
687 #define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */
688 /* if GR18 indicates a display switch */
689 #define SWF14_DS_PIPEB_LFP2_EN (1<<15)
690 #define SWF14_DS_PIPEB_EFP2_EN (1<<14)
691 #define SWF14_DS_PIPEB_TV2_EN (1<<13)
692 #define SWF14_DS_PIPEB_CRT2_EN (1<<12)
693 #define SWF14_DS_PIPEB_LFP_EN (1<<11)
694 #define SWF14_DS_PIPEB_EFP_EN (1<<10)
695 #define SWF14_DS_PIPEB_TV_EN (1<<9)
696 #define SWF14_DS_PIPEB_CRT_EN (1<<8)
697 #define SWF14_DS_PIPEA_LFP2_EN (1<<7)
698 #define SWF14_DS_PIPEA_EFP2_EN (1<<6)
699 #define SWF14_DS_PIPEA_TV2_EN (1<<5)
700 #define SWF14_DS_PIPEA_CRT2_EN (1<<4)
701 #define SWF14_DS_PIPEA_LFP_EN (1<<3)
702 #define SWF14_DS_PIPEA_EFP_EN (1<<2)
703 #define SWF14_DS_PIPEA_TV_EN (1<<1)
704 #define SWF14_DS_PIPEA_CRT_EN (1<<0)
705 /* if GR18 indicates a panel fitting request */
706 #define SWF14_PFIT_EN (1<<0) /* 0 means disable */
707 /* if GR18 indicates an APM change request */
708 #define SWF14_APM_HIBERNATE 0x4
709 #define SWF14_APM_SUSPEND 0x3
710 #define SWF14_APM_STANDBY 0x1
711 #define SWF14_APM_RESTORE 0x0
713 /* Add the device class for LFP, TV, HDMI */
714 #define DEVICE_TYPE_INT_LFP 0x1022
715 #define DEVICE_TYPE_INT_TV 0x1009
716 #define DEVICE_TYPE_HDMI 0x60D2
717 #define DEVICE_TYPE_DP 0x68C6
718 #define DEVICE_TYPE_eDP 0x78C6
720 #define DEVICE_TYPE_CLASS_EXTENSION (1 << 15)
721 #define DEVICE_TYPE_POWER_MANAGEMENT (1 << 14)
722 #define DEVICE_TYPE_HOTPLUG_SIGNALING (1 << 13)
723 #define DEVICE_TYPE_INTERNAL_CONNECTOR (1 << 12)
724 #define DEVICE_TYPE_NOT_HDMI_OUTPUT (1 << 11)
725 #define DEVICE_TYPE_MIPI_OUTPUT (1 << 10)
726 #define DEVICE_TYPE_COMPOSITE_OUTPUT (1 << 9)
727 #define DEVICE_TYPE_DUAL_CHANNEL (1 << 8)
728 #define DEVICE_TYPE_HIGH_SPEED_LINK (1 << 6)
729 #define DEVICE_TYPE_LVDS_SINGALING (1 << 5)
730 #define DEVICE_TYPE_TMDS_DVI_SIGNALING (1 << 4)
731 #define DEVICE_TYPE_VIDEO_SIGNALING (1 << 3)
732 #define DEVICE_TYPE_DISPLAYPORT_OUTPUT (1 << 2)
733 #define DEVICE_TYPE_DIGITAL_OUTPUT (1 << 1)
734 #define DEVICE_TYPE_ANALOG_OUTPUT (1 << 0)
737 * Bits we care about when checking for DEVICE_TYPE_eDP
738 * Depending on the system, the other bits may or may not
739 * be set for eDP outputs.
741 #define DEVICE_TYPE_eDP_BITS \
742 (DEVICE_TYPE_INTERNAL_CONNECTOR | \
743 DEVICE_TYPE_NOT_HDMI_OUTPUT | \
744 DEVICE_TYPE_MIPI_OUTPUT | \
745 DEVICE_TYPE_COMPOSITE_OUTPUT | \
746 DEVICE_TYPE_DUAL_CHANNEL | \
747 DEVICE_TYPE_LVDS_SINGALING | \
748 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
749 DEVICE_TYPE_VIDEO_SIGNALING | \
750 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
751 DEVICE_TYPE_DIGITAL_OUTPUT | \
752 DEVICE_TYPE_ANALOG_OUTPUT)
754 /* define the DVO port for HDMI output type */
759 /* define the PORT for DP output type */
764 /* Possible values for the "DVO Port" field for versions >= 155: */
765 #define DVO_PORT_HDMIA 0
766 #define DVO_PORT_HDMIB 1
767 #define DVO_PORT_HDMIC 2
768 #define DVO_PORT_HDMID 3
769 #define DVO_PORT_LVDS 4
770 #define DVO_PORT_TV 5
771 #define DVO_PORT_CRT 6
772 #define DVO_PORT_DPB 7
773 #define DVO_PORT_DPC 8
774 #define DVO_PORT_DPD 9
775 #define DVO_PORT_DPA 10
776 #define DVO_PORT_MIPIA 21
777 #define DVO_PORT_MIPIB 22
778 #define DVO_PORT_MIPIC 23
779 #define DVO_PORT_MIPID 24
781 /* Block 52 contains MIPI Panel info
782 * 6 such enteries will there. Index into correct
783 * entery is based on the panel_index in #40 LFP
785 #define MAX_MIPI_CONFIGURATIONS 6
787 #define MIPI_DSI_UNDEFINED_PANEL_ID 0
788 #define MIPI_DSI_GENERIC_PANEL_ID 1
791 * PMIC vs SoC Backlight support specified in pwm_blc
792 * field in mipi_config block below.
794 #define PPS_BLC_PMIC 0
795 #define PPS_BLC_SOC 1
801 u32 enable_dithering
:1;
805 u32 panel_arch_type
:2;
808 #define NON_BURST_SYNC_PULSE 0x1
809 #define NON_BURST_SYNC_EVENTS 0x2
810 #define BURST_MODE 0x3
811 u32 video_transfer_mode
:2;
813 u32 cabc_supported
:1;
817 #define PIXEL_FORMAT_RGB565 0x1
818 #define PIXEL_FORMAT_RGB666 0x2
819 #define PIXEL_FORMAT_RGB666_LOOSELY_PACKED 0x3
820 #define PIXEL_FORMAT_RGB888 0x4
821 u32 videomode_color_format
:4;
824 #define ENABLE_ROTATION_0 0x0
825 #define ENABLE_ROTATION_90 0x1
826 #define ENABLE_ROTATION_180 0x2
827 #define ENABLE_ROTATION_270 0x3
832 /* 2 byte Port Description */
833 #define DUAL_LINK_NOT_SUPPORTED 0
834 #define DUAL_LINK_FRONT_BACK 1
835 #define DUAL_LINK_PIXEL_ALT 2
844 u32 target_burst_mode_freq
;
848 #define BYTE_CLK_SEL_20MHZ 0
849 #define BYTE_CLK_SEL_10MHZ 1
850 #define BYTE_CLK_SEL_5MHZ 2
856 u16 dphy_param_valid
:1;
857 u16 eot_pkt_disabled
:1;
858 u16 enable_clk_stop
:1;
863 u32 turn_around_timeout
;
864 u32 device_reset_timer
;
865 u32 master_init_timer
;
869 /* 4 byte Dphy Params */
878 u32 clk_lane_switch_cnt
;
883 /* timings based on dphy spec */
892 u16 tclk_prepare_clkzero
;
898 u16 ths_prepare_hszero
;
917 /* Block 52 contains MIPI configuration block
918 * 6 * bdb_mipi_config, followed by 6 pps data
921 * all delays has a unit of 100us
923 struct mipi_pps_data
{
926 u16 bl_disable_delay
;
928 u16 panel_power_cycle_delay
;
931 struct bdb_mipi_config
{
932 struct mipi_config config
[MAX_MIPI_CONFIGURATIONS
];
933 struct mipi_pps_data pps
[MAX_MIPI_CONFIGURATIONS
];
936 /* Block 53 contains MIPI sequences as needed by the panel
937 * for enabling it. This block can be variable in size and
938 * can be maximum of 6 blocks
940 struct bdb_mipi_sequence
{
945 /* MIPI Sequnece Block definitions */
947 MIPI_SEQ_UNDEFINED
= 0,
948 MIPI_SEQ_ASSERT_RESET
,
951 MIPI_SEQ_DISPLAY_OFF
,
952 MIPI_SEQ_DEASSERT_RESET
,
956 enum mipi_seq_element
{
957 MIPI_SEQ_ELEM_UNDEFINED
= 0,
958 MIPI_SEQ_ELEM_SEND_PKT
,
961 MIPI_SEQ_ELEM_STATUS
,
965 enum mipi_gpio_pin_index
{
966 MIPI_GPIO_UNDEFINED
= 0,
967 MIPI_GPIO_PANEL_ENABLE
,
969 MIPI_GPIO_PWM_ENABLE
,
971 MIPI_GPIO_PWR_DOWN_R
,
972 MIPI_GPIO_STDBY_RST_N
,
976 #endif /* _I830_BIOS_H_ */