2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/module.h>
28 #include <linux/input.h>
29 #include <linux/i2c.h>
30 #include <linux/kernel.h>
31 #include <linux/slab.h>
33 #include "intel_drv.h"
36 #include "i915_trace.h"
37 #include "drm_dp_helper.h"
39 #include "drm_crtc_helper.h"
41 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
43 bool intel_pipe_has_type (struct drm_crtc
*crtc
, int type
);
44 static void intel_update_watermarks(struct drm_device
*dev
);
45 static void intel_increase_pllclock(struct drm_crtc
*crtc
, bool schedule
);
68 #define INTEL_P2_NUM 2
69 typedef struct intel_limit intel_limit_t
;
71 intel_range_t dot
, vco
, n
, m
, m1
, m2
, p
, p1
;
73 bool (* find_pll
)(const intel_limit_t
*, struct drm_crtc
*,
74 int, int, intel_clock_t
*);
77 #define I8XX_DOT_MIN 25000
78 #define I8XX_DOT_MAX 350000
79 #define I8XX_VCO_MIN 930000
80 #define I8XX_VCO_MAX 1400000
84 #define I8XX_M_MAX 140
85 #define I8XX_M1_MIN 18
86 #define I8XX_M1_MAX 26
88 #define I8XX_M2_MAX 16
90 #define I8XX_P_MAX 128
92 #define I8XX_P1_MAX 33
93 #define I8XX_P1_LVDS_MIN 1
94 #define I8XX_P1_LVDS_MAX 6
95 #define I8XX_P2_SLOW 4
96 #define I8XX_P2_FAST 2
97 #define I8XX_P2_LVDS_SLOW 14
98 #define I8XX_P2_LVDS_FAST 7
99 #define I8XX_P2_SLOW_LIMIT 165000
101 #define I9XX_DOT_MIN 20000
102 #define I9XX_DOT_MAX 400000
103 #define I9XX_VCO_MIN 1400000
104 #define I9XX_VCO_MAX 2800000
105 #define PINEVIEW_VCO_MIN 1700000
106 #define PINEVIEW_VCO_MAX 3500000
109 /* Pineview's Ncounter is a ring counter */
110 #define PINEVIEW_N_MIN 3
111 #define PINEVIEW_N_MAX 6
112 #define I9XX_M_MIN 70
113 #define I9XX_M_MAX 120
114 #define PINEVIEW_M_MIN 2
115 #define PINEVIEW_M_MAX 256
116 #define I9XX_M1_MIN 10
117 #define I9XX_M1_MAX 22
118 #define I9XX_M2_MIN 5
119 #define I9XX_M2_MAX 9
120 /* Pineview M1 is reserved, and must be 0 */
121 #define PINEVIEW_M1_MIN 0
122 #define PINEVIEW_M1_MAX 0
123 #define PINEVIEW_M2_MIN 0
124 #define PINEVIEW_M2_MAX 254
125 #define I9XX_P_SDVO_DAC_MIN 5
126 #define I9XX_P_SDVO_DAC_MAX 80
127 #define I9XX_P_LVDS_MIN 7
128 #define I9XX_P_LVDS_MAX 98
129 #define PINEVIEW_P_LVDS_MIN 7
130 #define PINEVIEW_P_LVDS_MAX 112
131 #define I9XX_P1_MIN 1
132 #define I9XX_P1_MAX 8
133 #define I9XX_P2_SDVO_DAC_SLOW 10
134 #define I9XX_P2_SDVO_DAC_FAST 5
135 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000
136 #define I9XX_P2_LVDS_SLOW 14
137 #define I9XX_P2_LVDS_FAST 7
138 #define I9XX_P2_LVDS_SLOW_LIMIT 112000
140 /*The parameter is for SDVO on G4x platform*/
141 #define G4X_DOT_SDVO_MIN 25000
142 #define G4X_DOT_SDVO_MAX 270000
143 #define G4X_VCO_MIN 1750000
144 #define G4X_VCO_MAX 3500000
145 #define G4X_N_SDVO_MIN 1
146 #define G4X_N_SDVO_MAX 4
147 #define G4X_M_SDVO_MIN 104
148 #define G4X_M_SDVO_MAX 138
149 #define G4X_M1_SDVO_MIN 17
150 #define G4X_M1_SDVO_MAX 23
151 #define G4X_M2_SDVO_MIN 5
152 #define G4X_M2_SDVO_MAX 11
153 #define G4X_P_SDVO_MIN 10
154 #define G4X_P_SDVO_MAX 30
155 #define G4X_P1_SDVO_MIN 1
156 #define G4X_P1_SDVO_MAX 3
157 #define G4X_P2_SDVO_SLOW 10
158 #define G4X_P2_SDVO_FAST 10
159 #define G4X_P2_SDVO_LIMIT 270000
161 /*The parameter is for HDMI_DAC on G4x platform*/
162 #define G4X_DOT_HDMI_DAC_MIN 22000
163 #define G4X_DOT_HDMI_DAC_MAX 400000
164 #define G4X_N_HDMI_DAC_MIN 1
165 #define G4X_N_HDMI_DAC_MAX 4
166 #define G4X_M_HDMI_DAC_MIN 104
167 #define G4X_M_HDMI_DAC_MAX 138
168 #define G4X_M1_HDMI_DAC_MIN 16
169 #define G4X_M1_HDMI_DAC_MAX 23
170 #define G4X_M2_HDMI_DAC_MIN 5
171 #define G4X_M2_HDMI_DAC_MAX 11
172 #define G4X_P_HDMI_DAC_MIN 5
173 #define G4X_P_HDMI_DAC_MAX 80
174 #define G4X_P1_HDMI_DAC_MIN 1
175 #define G4X_P1_HDMI_DAC_MAX 8
176 #define G4X_P2_HDMI_DAC_SLOW 10
177 #define G4X_P2_HDMI_DAC_FAST 5
178 #define G4X_P2_HDMI_DAC_LIMIT 165000
180 /*The parameter is for SINGLE_CHANNEL_LVDS on G4x platform*/
181 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MIN 20000
182 #define G4X_DOT_SINGLE_CHANNEL_LVDS_MAX 115000
183 #define G4X_N_SINGLE_CHANNEL_LVDS_MIN 1
184 #define G4X_N_SINGLE_CHANNEL_LVDS_MAX 3
185 #define G4X_M_SINGLE_CHANNEL_LVDS_MIN 104
186 #define G4X_M_SINGLE_CHANNEL_LVDS_MAX 138
187 #define G4X_M1_SINGLE_CHANNEL_LVDS_MIN 17
188 #define G4X_M1_SINGLE_CHANNEL_LVDS_MAX 23
189 #define G4X_M2_SINGLE_CHANNEL_LVDS_MIN 5
190 #define G4X_M2_SINGLE_CHANNEL_LVDS_MAX 11
191 #define G4X_P_SINGLE_CHANNEL_LVDS_MIN 28
192 #define G4X_P_SINGLE_CHANNEL_LVDS_MAX 112
193 #define G4X_P1_SINGLE_CHANNEL_LVDS_MIN 2
194 #define G4X_P1_SINGLE_CHANNEL_LVDS_MAX 8
195 #define G4X_P2_SINGLE_CHANNEL_LVDS_SLOW 14
196 #define G4X_P2_SINGLE_CHANNEL_LVDS_FAST 14
197 #define G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT 0
199 /*The parameter is for DUAL_CHANNEL_LVDS on G4x platform*/
200 #define G4X_DOT_DUAL_CHANNEL_LVDS_MIN 80000
201 #define G4X_DOT_DUAL_CHANNEL_LVDS_MAX 224000
202 #define G4X_N_DUAL_CHANNEL_LVDS_MIN 1
203 #define G4X_N_DUAL_CHANNEL_LVDS_MAX 3
204 #define G4X_M_DUAL_CHANNEL_LVDS_MIN 104
205 #define G4X_M_DUAL_CHANNEL_LVDS_MAX 138
206 #define G4X_M1_DUAL_CHANNEL_LVDS_MIN 17
207 #define G4X_M1_DUAL_CHANNEL_LVDS_MAX 23
208 #define G4X_M2_DUAL_CHANNEL_LVDS_MIN 5
209 #define G4X_M2_DUAL_CHANNEL_LVDS_MAX 11
210 #define G4X_P_DUAL_CHANNEL_LVDS_MIN 14
211 #define G4X_P_DUAL_CHANNEL_LVDS_MAX 42
212 #define G4X_P1_DUAL_CHANNEL_LVDS_MIN 2
213 #define G4X_P1_DUAL_CHANNEL_LVDS_MAX 6
214 #define G4X_P2_DUAL_CHANNEL_LVDS_SLOW 7
215 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST 7
216 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT 0
218 /*The parameter is for DISPLAY PORT on G4x platform*/
219 #define G4X_DOT_DISPLAY_PORT_MIN 161670
220 #define G4X_DOT_DISPLAY_PORT_MAX 227000
221 #define G4X_N_DISPLAY_PORT_MIN 1
222 #define G4X_N_DISPLAY_PORT_MAX 2
223 #define G4X_M_DISPLAY_PORT_MIN 97
224 #define G4X_M_DISPLAY_PORT_MAX 108
225 #define G4X_M1_DISPLAY_PORT_MIN 0x10
226 #define G4X_M1_DISPLAY_PORT_MAX 0x12
227 #define G4X_M2_DISPLAY_PORT_MIN 0x05
228 #define G4X_M2_DISPLAY_PORT_MAX 0x06
229 #define G4X_P_DISPLAY_PORT_MIN 10
230 #define G4X_P_DISPLAY_PORT_MAX 20
231 #define G4X_P1_DISPLAY_PORT_MIN 1
232 #define G4X_P1_DISPLAY_PORT_MAX 2
233 #define G4X_P2_DISPLAY_PORT_SLOW 10
234 #define G4X_P2_DISPLAY_PORT_FAST 10
235 #define G4X_P2_DISPLAY_PORT_LIMIT 0
237 /* Ironlake / Sandybridge */
238 /* as we calculate clock using (register_value + 2) for
239 N/M1/M2, so here the range value for them is (actual_value-2).
241 #define IRONLAKE_DOT_MIN 25000
242 #define IRONLAKE_DOT_MAX 350000
243 #define IRONLAKE_VCO_MIN 1760000
244 #define IRONLAKE_VCO_MAX 3510000
245 #define IRONLAKE_M1_MIN 12
246 #define IRONLAKE_M1_MAX 22
247 #define IRONLAKE_M2_MIN 5
248 #define IRONLAKE_M2_MAX 9
249 #define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
251 /* We have parameter ranges for different type of outputs. */
253 /* DAC & HDMI Refclk 120Mhz */
254 #define IRONLAKE_DAC_N_MIN 1
255 #define IRONLAKE_DAC_N_MAX 5
256 #define IRONLAKE_DAC_M_MIN 79
257 #define IRONLAKE_DAC_M_MAX 127
258 #define IRONLAKE_DAC_P_MIN 5
259 #define IRONLAKE_DAC_P_MAX 80
260 #define IRONLAKE_DAC_P1_MIN 1
261 #define IRONLAKE_DAC_P1_MAX 8
262 #define IRONLAKE_DAC_P2_SLOW 10
263 #define IRONLAKE_DAC_P2_FAST 5
265 /* LVDS single-channel 120Mhz refclk */
266 #define IRONLAKE_LVDS_S_N_MIN 1
267 #define IRONLAKE_LVDS_S_N_MAX 3
268 #define IRONLAKE_LVDS_S_M_MIN 79
269 #define IRONLAKE_LVDS_S_M_MAX 118
270 #define IRONLAKE_LVDS_S_P_MIN 28
271 #define IRONLAKE_LVDS_S_P_MAX 112
272 #define IRONLAKE_LVDS_S_P1_MIN 2
273 #define IRONLAKE_LVDS_S_P1_MAX 8
274 #define IRONLAKE_LVDS_S_P2_SLOW 14
275 #define IRONLAKE_LVDS_S_P2_FAST 14
277 /* LVDS dual-channel 120Mhz refclk */
278 #define IRONLAKE_LVDS_D_N_MIN 1
279 #define IRONLAKE_LVDS_D_N_MAX 3
280 #define IRONLAKE_LVDS_D_M_MIN 79
281 #define IRONLAKE_LVDS_D_M_MAX 127
282 #define IRONLAKE_LVDS_D_P_MIN 14
283 #define IRONLAKE_LVDS_D_P_MAX 56
284 #define IRONLAKE_LVDS_D_P1_MIN 2
285 #define IRONLAKE_LVDS_D_P1_MAX 8
286 #define IRONLAKE_LVDS_D_P2_SLOW 7
287 #define IRONLAKE_LVDS_D_P2_FAST 7
289 /* LVDS single-channel 100Mhz refclk */
290 #define IRONLAKE_LVDS_S_SSC_N_MIN 1
291 #define IRONLAKE_LVDS_S_SSC_N_MAX 2
292 #define IRONLAKE_LVDS_S_SSC_M_MIN 79
293 #define IRONLAKE_LVDS_S_SSC_M_MAX 126
294 #define IRONLAKE_LVDS_S_SSC_P_MIN 28
295 #define IRONLAKE_LVDS_S_SSC_P_MAX 112
296 #define IRONLAKE_LVDS_S_SSC_P1_MIN 2
297 #define IRONLAKE_LVDS_S_SSC_P1_MAX 8
298 #define IRONLAKE_LVDS_S_SSC_P2_SLOW 14
299 #define IRONLAKE_LVDS_S_SSC_P2_FAST 14
301 /* LVDS dual-channel 100Mhz refclk */
302 #define IRONLAKE_LVDS_D_SSC_N_MIN 1
303 #define IRONLAKE_LVDS_D_SSC_N_MAX 3
304 #define IRONLAKE_LVDS_D_SSC_M_MIN 79
305 #define IRONLAKE_LVDS_D_SSC_M_MAX 126
306 #define IRONLAKE_LVDS_D_SSC_P_MIN 14
307 #define IRONLAKE_LVDS_D_SSC_P_MAX 42
308 #define IRONLAKE_LVDS_D_SSC_P1_MIN 2
309 #define IRONLAKE_LVDS_D_SSC_P1_MAX 6
310 #define IRONLAKE_LVDS_D_SSC_P2_SLOW 7
311 #define IRONLAKE_LVDS_D_SSC_P2_FAST 7
314 #define IRONLAKE_DP_N_MIN 1
315 #define IRONLAKE_DP_N_MAX 2
316 #define IRONLAKE_DP_M_MIN 81
317 #define IRONLAKE_DP_M_MAX 90
318 #define IRONLAKE_DP_P_MIN 10
319 #define IRONLAKE_DP_P_MAX 20
320 #define IRONLAKE_DP_P2_FAST 10
321 #define IRONLAKE_DP_P2_SLOW 10
322 #define IRONLAKE_DP_P2_LIMIT 0
323 #define IRONLAKE_DP_P1_MIN 1
324 #define IRONLAKE_DP_P1_MAX 2
327 intel_find_best_PLL(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
328 int target
, int refclk
, intel_clock_t
*best_clock
);
330 intel_g4x_find_best_PLL(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
331 int target
, int refclk
, intel_clock_t
*best_clock
);
334 intel_find_pll_g4x_dp(const intel_limit_t
*, struct drm_crtc
*crtc
,
335 int target
, int refclk
, intel_clock_t
*best_clock
);
337 intel_find_pll_ironlake_dp(const intel_limit_t
*, struct drm_crtc
*crtc
,
338 int target
, int refclk
, intel_clock_t
*best_clock
);
340 static const intel_limit_t intel_limits_i8xx_dvo
= {
341 .dot
= { .min
= I8XX_DOT_MIN
, .max
= I8XX_DOT_MAX
},
342 .vco
= { .min
= I8XX_VCO_MIN
, .max
= I8XX_VCO_MAX
},
343 .n
= { .min
= I8XX_N_MIN
, .max
= I8XX_N_MAX
},
344 .m
= { .min
= I8XX_M_MIN
, .max
= I8XX_M_MAX
},
345 .m1
= { .min
= I8XX_M1_MIN
, .max
= I8XX_M1_MAX
},
346 .m2
= { .min
= I8XX_M2_MIN
, .max
= I8XX_M2_MAX
},
347 .p
= { .min
= I8XX_P_MIN
, .max
= I8XX_P_MAX
},
348 .p1
= { .min
= I8XX_P1_MIN
, .max
= I8XX_P1_MAX
},
349 .p2
= { .dot_limit
= I8XX_P2_SLOW_LIMIT
,
350 .p2_slow
= I8XX_P2_SLOW
, .p2_fast
= I8XX_P2_FAST
},
351 .find_pll
= intel_find_best_PLL
,
354 static const intel_limit_t intel_limits_i8xx_lvds
= {
355 .dot
= { .min
= I8XX_DOT_MIN
, .max
= I8XX_DOT_MAX
},
356 .vco
= { .min
= I8XX_VCO_MIN
, .max
= I8XX_VCO_MAX
},
357 .n
= { .min
= I8XX_N_MIN
, .max
= I8XX_N_MAX
},
358 .m
= { .min
= I8XX_M_MIN
, .max
= I8XX_M_MAX
},
359 .m1
= { .min
= I8XX_M1_MIN
, .max
= I8XX_M1_MAX
},
360 .m2
= { .min
= I8XX_M2_MIN
, .max
= I8XX_M2_MAX
},
361 .p
= { .min
= I8XX_P_MIN
, .max
= I8XX_P_MAX
},
362 .p1
= { .min
= I8XX_P1_LVDS_MIN
, .max
= I8XX_P1_LVDS_MAX
},
363 .p2
= { .dot_limit
= I8XX_P2_SLOW_LIMIT
,
364 .p2_slow
= I8XX_P2_LVDS_SLOW
, .p2_fast
= I8XX_P2_LVDS_FAST
},
365 .find_pll
= intel_find_best_PLL
,
368 static const intel_limit_t intel_limits_i9xx_sdvo
= {
369 .dot
= { .min
= I9XX_DOT_MIN
, .max
= I9XX_DOT_MAX
},
370 .vco
= { .min
= I9XX_VCO_MIN
, .max
= I9XX_VCO_MAX
},
371 .n
= { .min
= I9XX_N_MIN
, .max
= I9XX_N_MAX
},
372 .m
= { .min
= I9XX_M_MIN
, .max
= I9XX_M_MAX
},
373 .m1
= { .min
= I9XX_M1_MIN
, .max
= I9XX_M1_MAX
},
374 .m2
= { .min
= I9XX_M2_MIN
, .max
= I9XX_M2_MAX
},
375 .p
= { .min
= I9XX_P_SDVO_DAC_MIN
, .max
= I9XX_P_SDVO_DAC_MAX
},
376 .p1
= { .min
= I9XX_P1_MIN
, .max
= I9XX_P1_MAX
},
377 .p2
= { .dot_limit
= I9XX_P2_SDVO_DAC_SLOW_LIMIT
,
378 .p2_slow
= I9XX_P2_SDVO_DAC_SLOW
, .p2_fast
= I9XX_P2_SDVO_DAC_FAST
},
379 .find_pll
= intel_find_best_PLL
,
382 static const intel_limit_t intel_limits_i9xx_lvds
= {
383 .dot
= { .min
= I9XX_DOT_MIN
, .max
= I9XX_DOT_MAX
},
384 .vco
= { .min
= I9XX_VCO_MIN
, .max
= I9XX_VCO_MAX
},
385 .n
= { .min
= I9XX_N_MIN
, .max
= I9XX_N_MAX
},
386 .m
= { .min
= I9XX_M_MIN
, .max
= I9XX_M_MAX
},
387 .m1
= { .min
= I9XX_M1_MIN
, .max
= I9XX_M1_MAX
},
388 .m2
= { .min
= I9XX_M2_MIN
, .max
= I9XX_M2_MAX
},
389 .p
= { .min
= I9XX_P_LVDS_MIN
, .max
= I9XX_P_LVDS_MAX
},
390 .p1
= { .min
= I9XX_P1_MIN
, .max
= I9XX_P1_MAX
},
391 /* The single-channel range is 25-112Mhz, and dual-channel
392 * is 80-224Mhz. Prefer single channel as much as possible.
394 .p2
= { .dot_limit
= I9XX_P2_LVDS_SLOW_LIMIT
,
395 .p2_slow
= I9XX_P2_LVDS_SLOW
, .p2_fast
= I9XX_P2_LVDS_FAST
},
396 .find_pll
= intel_find_best_PLL
,
399 /* below parameter and function is for G4X Chipset Family*/
400 static const intel_limit_t intel_limits_g4x_sdvo
= {
401 .dot
= { .min
= G4X_DOT_SDVO_MIN
, .max
= G4X_DOT_SDVO_MAX
},
402 .vco
= { .min
= G4X_VCO_MIN
, .max
= G4X_VCO_MAX
},
403 .n
= { .min
= G4X_N_SDVO_MIN
, .max
= G4X_N_SDVO_MAX
},
404 .m
= { .min
= G4X_M_SDVO_MIN
, .max
= G4X_M_SDVO_MAX
},
405 .m1
= { .min
= G4X_M1_SDVO_MIN
, .max
= G4X_M1_SDVO_MAX
},
406 .m2
= { .min
= G4X_M2_SDVO_MIN
, .max
= G4X_M2_SDVO_MAX
},
407 .p
= { .min
= G4X_P_SDVO_MIN
, .max
= G4X_P_SDVO_MAX
},
408 .p1
= { .min
= G4X_P1_SDVO_MIN
, .max
= G4X_P1_SDVO_MAX
},
409 .p2
= { .dot_limit
= G4X_P2_SDVO_LIMIT
,
410 .p2_slow
= G4X_P2_SDVO_SLOW
,
411 .p2_fast
= G4X_P2_SDVO_FAST
413 .find_pll
= intel_g4x_find_best_PLL
,
416 static const intel_limit_t intel_limits_g4x_hdmi
= {
417 .dot
= { .min
= G4X_DOT_HDMI_DAC_MIN
, .max
= G4X_DOT_HDMI_DAC_MAX
},
418 .vco
= { .min
= G4X_VCO_MIN
, .max
= G4X_VCO_MAX
},
419 .n
= { .min
= G4X_N_HDMI_DAC_MIN
, .max
= G4X_N_HDMI_DAC_MAX
},
420 .m
= { .min
= G4X_M_HDMI_DAC_MIN
, .max
= G4X_M_HDMI_DAC_MAX
},
421 .m1
= { .min
= G4X_M1_HDMI_DAC_MIN
, .max
= G4X_M1_HDMI_DAC_MAX
},
422 .m2
= { .min
= G4X_M2_HDMI_DAC_MIN
, .max
= G4X_M2_HDMI_DAC_MAX
},
423 .p
= { .min
= G4X_P_HDMI_DAC_MIN
, .max
= G4X_P_HDMI_DAC_MAX
},
424 .p1
= { .min
= G4X_P1_HDMI_DAC_MIN
, .max
= G4X_P1_HDMI_DAC_MAX
},
425 .p2
= { .dot_limit
= G4X_P2_HDMI_DAC_LIMIT
,
426 .p2_slow
= G4X_P2_HDMI_DAC_SLOW
,
427 .p2_fast
= G4X_P2_HDMI_DAC_FAST
429 .find_pll
= intel_g4x_find_best_PLL
,
432 static const intel_limit_t intel_limits_g4x_single_channel_lvds
= {
433 .dot
= { .min
= G4X_DOT_SINGLE_CHANNEL_LVDS_MIN
,
434 .max
= G4X_DOT_SINGLE_CHANNEL_LVDS_MAX
},
435 .vco
= { .min
= G4X_VCO_MIN
,
436 .max
= G4X_VCO_MAX
},
437 .n
= { .min
= G4X_N_SINGLE_CHANNEL_LVDS_MIN
,
438 .max
= G4X_N_SINGLE_CHANNEL_LVDS_MAX
},
439 .m
= { .min
= G4X_M_SINGLE_CHANNEL_LVDS_MIN
,
440 .max
= G4X_M_SINGLE_CHANNEL_LVDS_MAX
},
441 .m1
= { .min
= G4X_M1_SINGLE_CHANNEL_LVDS_MIN
,
442 .max
= G4X_M1_SINGLE_CHANNEL_LVDS_MAX
},
443 .m2
= { .min
= G4X_M2_SINGLE_CHANNEL_LVDS_MIN
,
444 .max
= G4X_M2_SINGLE_CHANNEL_LVDS_MAX
},
445 .p
= { .min
= G4X_P_SINGLE_CHANNEL_LVDS_MIN
,
446 .max
= G4X_P_SINGLE_CHANNEL_LVDS_MAX
},
447 .p1
= { .min
= G4X_P1_SINGLE_CHANNEL_LVDS_MIN
,
448 .max
= G4X_P1_SINGLE_CHANNEL_LVDS_MAX
},
449 .p2
= { .dot_limit
= G4X_P2_SINGLE_CHANNEL_LVDS_LIMIT
,
450 .p2_slow
= G4X_P2_SINGLE_CHANNEL_LVDS_SLOW
,
451 .p2_fast
= G4X_P2_SINGLE_CHANNEL_LVDS_FAST
453 .find_pll
= intel_g4x_find_best_PLL
,
456 static const intel_limit_t intel_limits_g4x_dual_channel_lvds
= {
457 .dot
= { .min
= G4X_DOT_DUAL_CHANNEL_LVDS_MIN
,
458 .max
= G4X_DOT_DUAL_CHANNEL_LVDS_MAX
},
459 .vco
= { .min
= G4X_VCO_MIN
,
460 .max
= G4X_VCO_MAX
},
461 .n
= { .min
= G4X_N_DUAL_CHANNEL_LVDS_MIN
,
462 .max
= G4X_N_DUAL_CHANNEL_LVDS_MAX
},
463 .m
= { .min
= G4X_M_DUAL_CHANNEL_LVDS_MIN
,
464 .max
= G4X_M_DUAL_CHANNEL_LVDS_MAX
},
465 .m1
= { .min
= G4X_M1_DUAL_CHANNEL_LVDS_MIN
,
466 .max
= G4X_M1_DUAL_CHANNEL_LVDS_MAX
},
467 .m2
= { .min
= G4X_M2_DUAL_CHANNEL_LVDS_MIN
,
468 .max
= G4X_M2_DUAL_CHANNEL_LVDS_MAX
},
469 .p
= { .min
= G4X_P_DUAL_CHANNEL_LVDS_MIN
,
470 .max
= G4X_P_DUAL_CHANNEL_LVDS_MAX
},
471 .p1
= { .min
= G4X_P1_DUAL_CHANNEL_LVDS_MIN
,
472 .max
= G4X_P1_DUAL_CHANNEL_LVDS_MAX
},
473 .p2
= { .dot_limit
= G4X_P2_DUAL_CHANNEL_LVDS_LIMIT
,
474 .p2_slow
= G4X_P2_DUAL_CHANNEL_LVDS_SLOW
,
475 .p2_fast
= G4X_P2_DUAL_CHANNEL_LVDS_FAST
477 .find_pll
= intel_g4x_find_best_PLL
,
480 static const intel_limit_t intel_limits_g4x_display_port
= {
481 .dot
= { .min
= G4X_DOT_DISPLAY_PORT_MIN
,
482 .max
= G4X_DOT_DISPLAY_PORT_MAX
},
483 .vco
= { .min
= G4X_VCO_MIN
,
485 .n
= { .min
= G4X_N_DISPLAY_PORT_MIN
,
486 .max
= G4X_N_DISPLAY_PORT_MAX
},
487 .m
= { .min
= G4X_M_DISPLAY_PORT_MIN
,
488 .max
= G4X_M_DISPLAY_PORT_MAX
},
489 .m1
= { .min
= G4X_M1_DISPLAY_PORT_MIN
,
490 .max
= G4X_M1_DISPLAY_PORT_MAX
},
491 .m2
= { .min
= G4X_M2_DISPLAY_PORT_MIN
,
492 .max
= G4X_M2_DISPLAY_PORT_MAX
},
493 .p
= { .min
= G4X_P_DISPLAY_PORT_MIN
,
494 .max
= G4X_P_DISPLAY_PORT_MAX
},
495 .p1
= { .min
= G4X_P1_DISPLAY_PORT_MIN
,
496 .max
= G4X_P1_DISPLAY_PORT_MAX
},
497 .p2
= { .dot_limit
= G4X_P2_DISPLAY_PORT_LIMIT
,
498 .p2_slow
= G4X_P2_DISPLAY_PORT_SLOW
,
499 .p2_fast
= G4X_P2_DISPLAY_PORT_FAST
},
500 .find_pll
= intel_find_pll_g4x_dp
,
503 static const intel_limit_t intel_limits_pineview_sdvo
= {
504 .dot
= { .min
= I9XX_DOT_MIN
, .max
= I9XX_DOT_MAX
},
505 .vco
= { .min
= PINEVIEW_VCO_MIN
, .max
= PINEVIEW_VCO_MAX
},
506 .n
= { .min
= PINEVIEW_N_MIN
, .max
= PINEVIEW_N_MAX
},
507 .m
= { .min
= PINEVIEW_M_MIN
, .max
= PINEVIEW_M_MAX
},
508 .m1
= { .min
= PINEVIEW_M1_MIN
, .max
= PINEVIEW_M1_MAX
},
509 .m2
= { .min
= PINEVIEW_M2_MIN
, .max
= PINEVIEW_M2_MAX
},
510 .p
= { .min
= I9XX_P_SDVO_DAC_MIN
, .max
= I9XX_P_SDVO_DAC_MAX
},
511 .p1
= { .min
= I9XX_P1_MIN
, .max
= I9XX_P1_MAX
},
512 .p2
= { .dot_limit
= I9XX_P2_SDVO_DAC_SLOW_LIMIT
,
513 .p2_slow
= I9XX_P2_SDVO_DAC_SLOW
, .p2_fast
= I9XX_P2_SDVO_DAC_FAST
},
514 .find_pll
= intel_find_best_PLL
,
517 static const intel_limit_t intel_limits_pineview_lvds
= {
518 .dot
= { .min
= I9XX_DOT_MIN
, .max
= I9XX_DOT_MAX
},
519 .vco
= { .min
= PINEVIEW_VCO_MIN
, .max
= PINEVIEW_VCO_MAX
},
520 .n
= { .min
= PINEVIEW_N_MIN
, .max
= PINEVIEW_N_MAX
},
521 .m
= { .min
= PINEVIEW_M_MIN
, .max
= PINEVIEW_M_MAX
},
522 .m1
= { .min
= PINEVIEW_M1_MIN
, .max
= PINEVIEW_M1_MAX
},
523 .m2
= { .min
= PINEVIEW_M2_MIN
, .max
= PINEVIEW_M2_MAX
},
524 .p
= { .min
= PINEVIEW_P_LVDS_MIN
, .max
= PINEVIEW_P_LVDS_MAX
},
525 .p1
= { .min
= I9XX_P1_MIN
, .max
= I9XX_P1_MAX
},
526 /* Pineview only supports single-channel mode. */
527 .p2
= { .dot_limit
= I9XX_P2_LVDS_SLOW_LIMIT
,
528 .p2_slow
= I9XX_P2_LVDS_SLOW
, .p2_fast
= I9XX_P2_LVDS_SLOW
},
529 .find_pll
= intel_find_best_PLL
,
532 static const intel_limit_t intel_limits_ironlake_dac
= {
533 .dot
= { .min
= IRONLAKE_DOT_MIN
, .max
= IRONLAKE_DOT_MAX
},
534 .vco
= { .min
= IRONLAKE_VCO_MIN
, .max
= IRONLAKE_VCO_MAX
},
535 .n
= { .min
= IRONLAKE_DAC_N_MIN
, .max
= IRONLAKE_DAC_N_MAX
},
536 .m
= { .min
= IRONLAKE_DAC_M_MIN
, .max
= IRONLAKE_DAC_M_MAX
},
537 .m1
= { .min
= IRONLAKE_M1_MIN
, .max
= IRONLAKE_M1_MAX
},
538 .m2
= { .min
= IRONLAKE_M2_MIN
, .max
= IRONLAKE_M2_MAX
},
539 .p
= { .min
= IRONLAKE_DAC_P_MIN
, .max
= IRONLAKE_DAC_P_MAX
},
540 .p1
= { .min
= IRONLAKE_DAC_P1_MIN
, .max
= IRONLAKE_DAC_P1_MAX
},
541 .p2
= { .dot_limit
= IRONLAKE_P2_DOT_LIMIT
,
542 .p2_slow
= IRONLAKE_DAC_P2_SLOW
,
543 .p2_fast
= IRONLAKE_DAC_P2_FAST
},
544 .find_pll
= intel_g4x_find_best_PLL
,
547 static const intel_limit_t intel_limits_ironlake_single_lvds
= {
548 .dot
= { .min
= IRONLAKE_DOT_MIN
, .max
= IRONLAKE_DOT_MAX
},
549 .vco
= { .min
= IRONLAKE_VCO_MIN
, .max
= IRONLAKE_VCO_MAX
},
550 .n
= { .min
= IRONLAKE_LVDS_S_N_MIN
, .max
= IRONLAKE_LVDS_S_N_MAX
},
551 .m
= { .min
= IRONLAKE_LVDS_S_M_MIN
, .max
= IRONLAKE_LVDS_S_M_MAX
},
552 .m1
= { .min
= IRONLAKE_M1_MIN
, .max
= IRONLAKE_M1_MAX
},
553 .m2
= { .min
= IRONLAKE_M2_MIN
, .max
= IRONLAKE_M2_MAX
},
554 .p
= { .min
= IRONLAKE_LVDS_S_P_MIN
, .max
= IRONLAKE_LVDS_S_P_MAX
},
555 .p1
= { .min
= IRONLAKE_LVDS_S_P1_MIN
, .max
= IRONLAKE_LVDS_S_P1_MAX
},
556 .p2
= { .dot_limit
= IRONLAKE_P2_DOT_LIMIT
,
557 .p2_slow
= IRONLAKE_LVDS_S_P2_SLOW
,
558 .p2_fast
= IRONLAKE_LVDS_S_P2_FAST
},
559 .find_pll
= intel_g4x_find_best_PLL
,
562 static const intel_limit_t intel_limits_ironlake_dual_lvds
= {
563 .dot
= { .min
= IRONLAKE_DOT_MIN
, .max
= IRONLAKE_DOT_MAX
},
564 .vco
= { .min
= IRONLAKE_VCO_MIN
, .max
= IRONLAKE_VCO_MAX
},
565 .n
= { .min
= IRONLAKE_LVDS_D_N_MIN
, .max
= IRONLAKE_LVDS_D_N_MAX
},
566 .m
= { .min
= IRONLAKE_LVDS_D_M_MIN
, .max
= IRONLAKE_LVDS_D_M_MAX
},
567 .m1
= { .min
= IRONLAKE_M1_MIN
, .max
= IRONLAKE_M1_MAX
},
568 .m2
= { .min
= IRONLAKE_M2_MIN
, .max
= IRONLAKE_M2_MAX
},
569 .p
= { .min
= IRONLAKE_LVDS_D_P_MIN
, .max
= IRONLAKE_LVDS_D_P_MAX
},
570 .p1
= { .min
= IRONLAKE_LVDS_D_P1_MIN
, .max
= IRONLAKE_LVDS_D_P1_MAX
},
571 .p2
= { .dot_limit
= IRONLAKE_P2_DOT_LIMIT
,
572 .p2_slow
= IRONLAKE_LVDS_D_P2_SLOW
,
573 .p2_fast
= IRONLAKE_LVDS_D_P2_FAST
},
574 .find_pll
= intel_g4x_find_best_PLL
,
577 static const intel_limit_t intel_limits_ironlake_single_lvds_100m
= {
578 .dot
= { .min
= IRONLAKE_DOT_MIN
, .max
= IRONLAKE_DOT_MAX
},
579 .vco
= { .min
= IRONLAKE_VCO_MIN
, .max
= IRONLAKE_VCO_MAX
},
580 .n
= { .min
= IRONLAKE_LVDS_S_SSC_N_MIN
, .max
= IRONLAKE_LVDS_S_SSC_N_MAX
},
581 .m
= { .min
= IRONLAKE_LVDS_S_SSC_M_MIN
, .max
= IRONLAKE_LVDS_S_SSC_M_MAX
},
582 .m1
= { .min
= IRONLAKE_M1_MIN
, .max
= IRONLAKE_M1_MAX
},
583 .m2
= { .min
= IRONLAKE_M2_MIN
, .max
= IRONLAKE_M2_MAX
},
584 .p
= { .min
= IRONLAKE_LVDS_S_SSC_P_MIN
, .max
= IRONLAKE_LVDS_S_SSC_P_MAX
},
585 .p1
= { .min
= IRONLAKE_LVDS_S_SSC_P1_MIN
,.max
= IRONLAKE_LVDS_S_SSC_P1_MAX
},
586 .p2
= { .dot_limit
= IRONLAKE_P2_DOT_LIMIT
,
587 .p2_slow
= IRONLAKE_LVDS_S_SSC_P2_SLOW
,
588 .p2_fast
= IRONLAKE_LVDS_S_SSC_P2_FAST
},
589 .find_pll
= intel_g4x_find_best_PLL
,
592 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m
= {
593 .dot
= { .min
= IRONLAKE_DOT_MIN
, .max
= IRONLAKE_DOT_MAX
},
594 .vco
= { .min
= IRONLAKE_VCO_MIN
, .max
= IRONLAKE_VCO_MAX
},
595 .n
= { .min
= IRONLAKE_LVDS_D_SSC_N_MIN
, .max
= IRONLAKE_LVDS_D_SSC_N_MAX
},
596 .m
= { .min
= IRONLAKE_LVDS_D_SSC_M_MIN
, .max
= IRONLAKE_LVDS_D_SSC_M_MAX
},
597 .m1
= { .min
= IRONLAKE_M1_MIN
, .max
= IRONLAKE_M1_MAX
},
598 .m2
= { .min
= IRONLAKE_M2_MIN
, .max
= IRONLAKE_M2_MAX
},
599 .p
= { .min
= IRONLAKE_LVDS_D_SSC_P_MIN
, .max
= IRONLAKE_LVDS_D_SSC_P_MAX
},
600 .p1
= { .min
= IRONLAKE_LVDS_D_SSC_P1_MIN
,.max
= IRONLAKE_LVDS_D_SSC_P1_MAX
},
601 .p2
= { .dot_limit
= IRONLAKE_P2_DOT_LIMIT
,
602 .p2_slow
= IRONLAKE_LVDS_D_SSC_P2_SLOW
,
603 .p2_fast
= IRONLAKE_LVDS_D_SSC_P2_FAST
},
604 .find_pll
= intel_g4x_find_best_PLL
,
607 static const intel_limit_t intel_limits_ironlake_display_port
= {
608 .dot
= { .min
= IRONLAKE_DOT_MIN
,
609 .max
= IRONLAKE_DOT_MAX
},
610 .vco
= { .min
= IRONLAKE_VCO_MIN
,
611 .max
= IRONLAKE_VCO_MAX
},
612 .n
= { .min
= IRONLAKE_DP_N_MIN
,
613 .max
= IRONLAKE_DP_N_MAX
},
614 .m
= { .min
= IRONLAKE_DP_M_MIN
,
615 .max
= IRONLAKE_DP_M_MAX
},
616 .m1
= { .min
= IRONLAKE_M1_MIN
,
617 .max
= IRONLAKE_M1_MAX
},
618 .m2
= { .min
= IRONLAKE_M2_MIN
,
619 .max
= IRONLAKE_M2_MAX
},
620 .p
= { .min
= IRONLAKE_DP_P_MIN
,
621 .max
= IRONLAKE_DP_P_MAX
},
622 .p1
= { .min
= IRONLAKE_DP_P1_MIN
,
623 .max
= IRONLAKE_DP_P1_MAX
},
624 .p2
= { .dot_limit
= IRONLAKE_DP_P2_LIMIT
,
625 .p2_slow
= IRONLAKE_DP_P2_SLOW
,
626 .p2_fast
= IRONLAKE_DP_P2_FAST
},
627 .find_pll
= intel_find_pll_ironlake_dp
,
630 static const intel_limit_t
*intel_ironlake_limit(struct drm_crtc
*crtc
)
632 struct drm_device
*dev
= crtc
->dev
;
633 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
634 const intel_limit_t
*limit
;
637 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
638 if (dev_priv
->lvds_use_ssc
&& dev_priv
->lvds_ssc_freq
== 100)
641 if ((I915_READ(PCH_LVDS
) & LVDS_CLKB_POWER_MASK
) ==
642 LVDS_CLKB_POWER_UP
) {
643 /* LVDS dual channel */
645 limit
= &intel_limits_ironlake_dual_lvds_100m
;
647 limit
= &intel_limits_ironlake_dual_lvds
;
650 limit
= &intel_limits_ironlake_single_lvds_100m
;
652 limit
= &intel_limits_ironlake_single_lvds
;
654 } else if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_DISPLAYPORT
) ||
656 limit
= &intel_limits_ironlake_display_port
;
658 limit
= &intel_limits_ironlake_dac
;
663 static const intel_limit_t
*intel_g4x_limit(struct drm_crtc
*crtc
)
665 struct drm_device
*dev
= crtc
->dev
;
666 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
667 const intel_limit_t
*limit
;
669 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
670 if ((I915_READ(LVDS
) & LVDS_CLKB_POWER_MASK
) ==
672 /* LVDS with dual channel */
673 limit
= &intel_limits_g4x_dual_channel_lvds
;
675 /* LVDS with dual channel */
676 limit
= &intel_limits_g4x_single_channel_lvds
;
677 } else if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_HDMI
) ||
678 intel_pipe_has_type(crtc
, INTEL_OUTPUT_ANALOG
)) {
679 limit
= &intel_limits_g4x_hdmi
;
680 } else if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_SDVO
)) {
681 limit
= &intel_limits_g4x_sdvo
;
682 } else if (intel_pipe_has_type (crtc
, INTEL_OUTPUT_DISPLAYPORT
)) {
683 limit
= &intel_limits_g4x_display_port
;
684 } else /* The option is for other outputs */
685 limit
= &intel_limits_i9xx_sdvo
;
690 static const intel_limit_t
*intel_limit(struct drm_crtc
*crtc
)
692 struct drm_device
*dev
= crtc
->dev
;
693 const intel_limit_t
*limit
;
695 if (HAS_PCH_SPLIT(dev
))
696 limit
= intel_ironlake_limit(crtc
);
697 else if (IS_G4X(dev
)) {
698 limit
= intel_g4x_limit(crtc
);
699 } else if (IS_I9XX(dev
) && !IS_PINEVIEW(dev
)) {
700 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
))
701 limit
= &intel_limits_i9xx_lvds
;
703 limit
= &intel_limits_i9xx_sdvo
;
704 } else if (IS_PINEVIEW(dev
)) {
705 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
))
706 limit
= &intel_limits_pineview_lvds
;
708 limit
= &intel_limits_pineview_sdvo
;
710 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
))
711 limit
= &intel_limits_i8xx_lvds
;
713 limit
= &intel_limits_i8xx_dvo
;
718 /* m1 is reserved as 0 in Pineview, n is a ring counter */
719 static void pineview_clock(int refclk
, intel_clock_t
*clock
)
721 clock
->m
= clock
->m2
+ 2;
722 clock
->p
= clock
->p1
* clock
->p2
;
723 clock
->vco
= refclk
* clock
->m
/ clock
->n
;
724 clock
->dot
= clock
->vco
/ clock
->p
;
727 static void intel_clock(struct drm_device
*dev
, int refclk
, intel_clock_t
*clock
)
729 if (IS_PINEVIEW(dev
)) {
730 pineview_clock(refclk
, clock
);
733 clock
->m
= 5 * (clock
->m1
+ 2) + (clock
->m2
+ 2);
734 clock
->p
= clock
->p1
* clock
->p2
;
735 clock
->vco
= refclk
* clock
->m
/ (clock
->n
+ 2);
736 clock
->dot
= clock
->vco
/ clock
->p
;
740 * Returns whether any output on the specified pipe is of the specified type
742 bool intel_pipe_has_type (struct drm_crtc
*crtc
, int type
)
744 struct drm_device
*dev
= crtc
->dev
;
745 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
746 struct drm_encoder
*l_entry
;
748 list_for_each_entry(l_entry
, &mode_config
->encoder_list
, head
) {
749 if (l_entry
&& l_entry
->crtc
== crtc
) {
750 struct intel_encoder
*intel_encoder
= enc_to_intel_encoder(l_entry
);
751 if (intel_encoder
->type
== type
)
758 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
760 * Returns whether the given set of divisors are valid for a given refclk with
761 * the given connectors.
764 static bool intel_PLL_is_valid(struct drm_crtc
*crtc
, intel_clock_t
*clock
)
766 const intel_limit_t
*limit
= intel_limit (crtc
);
767 struct drm_device
*dev
= crtc
->dev
;
769 if (clock
->p1
< limit
->p1
.min
|| limit
->p1
.max
< clock
->p1
)
770 INTELPllInvalid ("p1 out of range\n");
771 if (clock
->p
< limit
->p
.min
|| limit
->p
.max
< clock
->p
)
772 INTELPllInvalid ("p out of range\n");
773 if (clock
->m2
< limit
->m2
.min
|| limit
->m2
.max
< clock
->m2
)
774 INTELPllInvalid ("m2 out of range\n");
775 if (clock
->m1
< limit
->m1
.min
|| limit
->m1
.max
< clock
->m1
)
776 INTELPllInvalid ("m1 out of range\n");
777 if (clock
->m1
<= clock
->m2
&& !IS_PINEVIEW(dev
))
778 INTELPllInvalid ("m1 <= m2\n");
779 if (clock
->m
< limit
->m
.min
|| limit
->m
.max
< clock
->m
)
780 INTELPllInvalid ("m out of range\n");
781 if (clock
->n
< limit
->n
.min
|| limit
->n
.max
< clock
->n
)
782 INTELPllInvalid ("n out of range\n");
783 if (clock
->vco
< limit
->vco
.min
|| limit
->vco
.max
< clock
->vco
)
784 INTELPllInvalid ("vco out of range\n");
785 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
786 * connector, etc., rather than just a single range.
788 if (clock
->dot
< limit
->dot
.min
|| limit
->dot
.max
< clock
->dot
)
789 INTELPllInvalid ("dot out of range\n");
795 intel_find_best_PLL(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
796 int target
, int refclk
, intel_clock_t
*best_clock
)
799 struct drm_device
*dev
= crtc
->dev
;
800 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
804 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
) &&
805 (I915_READ(LVDS
)) != 0) {
807 * For LVDS, if the panel is on, just rely on its current
808 * settings for dual-channel. We haven't figured out how to
809 * reliably set up different single/dual channel state, if we
812 if ((I915_READ(LVDS
) & LVDS_CLKB_POWER_MASK
) ==
814 clock
.p2
= limit
->p2
.p2_fast
;
816 clock
.p2
= limit
->p2
.p2_slow
;
818 if (target
< limit
->p2
.dot_limit
)
819 clock
.p2
= limit
->p2
.p2_slow
;
821 clock
.p2
= limit
->p2
.p2_fast
;
824 memset (best_clock
, 0, sizeof (*best_clock
));
826 for (clock
.m1
= limit
->m1
.min
; clock
.m1
<= limit
->m1
.max
;
828 for (clock
.m2
= limit
->m2
.min
;
829 clock
.m2
<= limit
->m2
.max
; clock
.m2
++) {
830 /* m1 is always 0 in Pineview */
831 if (clock
.m2
>= clock
.m1
&& !IS_PINEVIEW(dev
))
833 for (clock
.n
= limit
->n
.min
;
834 clock
.n
<= limit
->n
.max
; clock
.n
++) {
835 for (clock
.p1
= limit
->p1
.min
;
836 clock
.p1
<= limit
->p1
.max
; clock
.p1
++) {
839 intel_clock(dev
, refclk
, &clock
);
841 if (!intel_PLL_is_valid(crtc
, &clock
))
844 this_err
= abs(clock
.dot
- target
);
845 if (this_err
< err
) {
854 return (err
!= target
);
858 intel_g4x_find_best_PLL(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
859 int target
, int refclk
, intel_clock_t
*best_clock
)
861 struct drm_device
*dev
= crtc
->dev
;
862 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
866 /* approximately equals target * 0.00488 */
867 int err_most
= (target
>> 8) + (target
>> 10);
870 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
873 if (HAS_PCH_SPLIT(dev
))
877 if ((I915_READ(lvds_reg
) & LVDS_CLKB_POWER_MASK
) ==
879 clock
.p2
= limit
->p2
.p2_fast
;
881 clock
.p2
= limit
->p2
.p2_slow
;
883 if (target
< limit
->p2
.dot_limit
)
884 clock
.p2
= limit
->p2
.p2_slow
;
886 clock
.p2
= limit
->p2
.p2_fast
;
889 memset(best_clock
, 0, sizeof(*best_clock
));
890 max_n
= limit
->n
.max
;
891 /* based on hardware requirement, prefer smaller n to precision */
892 for (clock
.n
= limit
->n
.min
; clock
.n
<= max_n
; clock
.n
++) {
893 /* based on hardware requirement, prefere larger m1,m2 */
894 for (clock
.m1
= limit
->m1
.max
;
895 clock
.m1
>= limit
->m1
.min
; clock
.m1
--) {
896 for (clock
.m2
= limit
->m2
.max
;
897 clock
.m2
>= limit
->m2
.min
; clock
.m2
--) {
898 for (clock
.p1
= limit
->p1
.max
;
899 clock
.p1
>= limit
->p1
.min
; clock
.p1
--) {
902 intel_clock(dev
, refclk
, &clock
);
903 if (!intel_PLL_is_valid(crtc
, &clock
))
905 this_err
= abs(clock
.dot
- target
) ;
906 if (this_err
< err_most
) {
920 intel_find_pll_ironlake_dp(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
921 int target
, int refclk
, intel_clock_t
*best_clock
)
923 struct drm_device
*dev
= crtc
->dev
;
926 /* return directly when it is eDP */
930 if (target
< 200000) {
943 intel_clock(dev
, refclk
, &clock
);
944 memcpy(best_clock
, &clock
, sizeof(intel_clock_t
));
948 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
950 intel_find_pll_g4x_dp(const intel_limit_t
*limit
, struct drm_crtc
*crtc
,
951 int target
, int refclk
, intel_clock_t
*best_clock
)
954 if (target
< 200000) {
967 clock
.m
= 5 * (clock
.m1
+ 2) + (clock
.m2
+ 2);
968 clock
.p
= (clock
.p1
* clock
.p2
);
969 clock
.dot
= 96000 * clock
.m
/ (clock
.n
+ 2) / clock
.p
;
971 memcpy(best_clock
, &clock
, sizeof(intel_clock_t
));
976 intel_wait_for_vblank(struct drm_device
*dev
)
978 /* Wait for 20ms, i.e. one cycle at 50hz. */
982 /* Parameters have changed, update FBC info */
983 static void i8xx_enable_fbc(struct drm_crtc
*crtc
, unsigned long interval
)
985 struct drm_device
*dev
= crtc
->dev
;
986 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
987 struct drm_framebuffer
*fb
= crtc
->fb
;
988 struct intel_framebuffer
*intel_fb
= to_intel_framebuffer(fb
);
989 struct drm_i915_gem_object
*obj_priv
= to_intel_bo(intel_fb
->obj
);
990 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
992 u32 fbc_ctl
, fbc_ctl2
;
994 dev_priv
->cfb_pitch
= dev_priv
->cfb_size
/ FBC_LL_SIZE
;
996 if (fb
->pitch
< dev_priv
->cfb_pitch
)
997 dev_priv
->cfb_pitch
= fb
->pitch
;
999 /* FBC_CTL wants 64B units */
1000 dev_priv
->cfb_pitch
= (dev_priv
->cfb_pitch
/ 64) - 1;
1001 dev_priv
->cfb_fence
= obj_priv
->fence_reg
;
1002 dev_priv
->cfb_plane
= intel_crtc
->plane
;
1003 plane
= dev_priv
->cfb_plane
== 0 ? FBC_CTL_PLANEA
: FBC_CTL_PLANEB
;
1005 /* Clear old tags */
1006 for (i
= 0; i
< (FBC_LL_SIZE
/ 32) + 1; i
++)
1007 I915_WRITE(FBC_TAG
+ (i
* 4), 0);
1010 fbc_ctl2
= FBC_CTL_FENCE_DBL
| FBC_CTL_IDLE_IMM
| plane
;
1011 if (obj_priv
->tiling_mode
!= I915_TILING_NONE
)
1012 fbc_ctl2
|= FBC_CTL_CPU_FENCE
;
1013 I915_WRITE(FBC_CONTROL2
, fbc_ctl2
);
1014 I915_WRITE(FBC_FENCE_OFF
, crtc
->y
);
1017 fbc_ctl
= FBC_CTL_EN
| FBC_CTL_PERIODIC
;
1019 fbc_ctl
|= FBC_CTL_C3_IDLE
; /* 945 needs special SR handling */
1020 fbc_ctl
|= (dev_priv
->cfb_pitch
& 0xff) << FBC_CTL_STRIDE_SHIFT
;
1021 fbc_ctl
|= (interval
& 0x2fff) << FBC_CTL_INTERVAL_SHIFT
;
1022 if (obj_priv
->tiling_mode
!= I915_TILING_NONE
)
1023 fbc_ctl
|= dev_priv
->cfb_fence
;
1024 I915_WRITE(FBC_CONTROL
, fbc_ctl
);
1026 DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ",
1027 dev_priv
->cfb_pitch
, crtc
->y
, dev_priv
->cfb_plane
);
1030 void i8xx_disable_fbc(struct drm_device
*dev
)
1032 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1033 unsigned long timeout
= jiffies
+ msecs_to_jiffies(1);
1036 if (!I915_HAS_FBC(dev
))
1039 if (!(I915_READ(FBC_CONTROL
) & FBC_CTL_EN
))
1040 return; /* Already off, just return */
1042 /* Disable compression */
1043 fbc_ctl
= I915_READ(FBC_CONTROL
);
1044 fbc_ctl
&= ~FBC_CTL_EN
;
1045 I915_WRITE(FBC_CONTROL
, fbc_ctl
);
1047 /* Wait for compressing bit to clear */
1048 while (I915_READ(FBC_STATUS
) & FBC_STAT_COMPRESSING
) {
1049 if (time_after(jiffies
, timeout
)) {
1050 DRM_DEBUG_DRIVER("FBC idle timed out\n");
1056 intel_wait_for_vblank(dev
);
1058 DRM_DEBUG_KMS("disabled FBC\n");
1061 static bool i8xx_fbc_enabled(struct drm_device
*dev
)
1063 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1065 return I915_READ(FBC_CONTROL
) & FBC_CTL_EN
;
1068 static void g4x_enable_fbc(struct drm_crtc
*crtc
, unsigned long interval
)
1070 struct drm_device
*dev
= crtc
->dev
;
1071 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1072 struct drm_framebuffer
*fb
= crtc
->fb
;
1073 struct intel_framebuffer
*intel_fb
= to_intel_framebuffer(fb
);
1074 struct drm_i915_gem_object
*obj_priv
= to_intel_bo(intel_fb
->obj
);
1075 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1076 int plane
= (intel_crtc
->plane
== 0 ? DPFC_CTL_PLANEA
:
1078 unsigned long stall_watermark
= 200;
1081 dev_priv
->cfb_pitch
= (dev_priv
->cfb_pitch
/ 64) - 1;
1082 dev_priv
->cfb_fence
= obj_priv
->fence_reg
;
1083 dev_priv
->cfb_plane
= intel_crtc
->plane
;
1085 dpfc_ctl
= plane
| DPFC_SR_EN
| DPFC_CTL_LIMIT_1X
;
1086 if (obj_priv
->tiling_mode
!= I915_TILING_NONE
) {
1087 dpfc_ctl
|= DPFC_CTL_FENCE_EN
| dev_priv
->cfb_fence
;
1088 I915_WRITE(DPFC_CHICKEN
, DPFC_HT_MODIFY
);
1090 I915_WRITE(DPFC_CHICKEN
, ~DPFC_HT_MODIFY
);
1093 I915_WRITE(DPFC_CONTROL
, dpfc_ctl
);
1094 I915_WRITE(DPFC_RECOMP_CTL
, DPFC_RECOMP_STALL_EN
|
1095 (stall_watermark
<< DPFC_RECOMP_STALL_WM_SHIFT
) |
1096 (interval
<< DPFC_RECOMP_TIMER_COUNT_SHIFT
));
1097 I915_WRITE(DPFC_FENCE_YOFF
, crtc
->y
);
1100 I915_WRITE(DPFC_CONTROL
, I915_READ(DPFC_CONTROL
) | DPFC_CTL_EN
);
1102 DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc
->plane
);
1105 void g4x_disable_fbc(struct drm_device
*dev
)
1107 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1110 /* Disable compression */
1111 dpfc_ctl
= I915_READ(DPFC_CONTROL
);
1112 dpfc_ctl
&= ~DPFC_CTL_EN
;
1113 I915_WRITE(DPFC_CONTROL
, dpfc_ctl
);
1114 intel_wait_for_vblank(dev
);
1116 DRM_DEBUG_KMS("disabled FBC\n");
1119 static bool g4x_fbc_enabled(struct drm_device
*dev
)
1121 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1123 return I915_READ(DPFC_CONTROL
) & DPFC_CTL_EN
;
1126 bool intel_fbc_enabled(struct drm_device
*dev
)
1128 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1130 if (!dev_priv
->display
.fbc_enabled
)
1133 return dev_priv
->display
.fbc_enabled(dev
);
1136 void intel_enable_fbc(struct drm_crtc
*crtc
, unsigned long interval
)
1138 struct drm_i915_private
*dev_priv
= crtc
->dev
->dev_private
;
1140 if (!dev_priv
->display
.enable_fbc
)
1143 dev_priv
->display
.enable_fbc(crtc
, interval
);
1146 void intel_disable_fbc(struct drm_device
*dev
)
1148 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1150 if (!dev_priv
->display
.disable_fbc
)
1153 dev_priv
->display
.disable_fbc(dev
);
1157 * intel_update_fbc - enable/disable FBC as needed
1158 * @crtc: CRTC to point the compressor at
1159 * @mode: mode in use
1161 * Set up the framebuffer compression hardware at mode set time. We
1162 * enable it if possible:
1163 * - plane A only (on pre-965)
1164 * - no pixel mulitply/line duplication
1165 * - no alpha buffer discard
1167 * - framebuffer <= 2048 in width, 1536 in height
1169 * We can't assume that any compression will take place (worst case),
1170 * so the compressed buffer has to be the same size as the uncompressed
1171 * one. It also must reside (along with the line length buffer) in
1174 * We need to enable/disable FBC on a global basis.
1176 static void intel_update_fbc(struct drm_crtc
*crtc
,
1177 struct drm_display_mode
*mode
)
1179 struct drm_device
*dev
= crtc
->dev
;
1180 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1181 struct drm_framebuffer
*fb
= crtc
->fb
;
1182 struct intel_framebuffer
*intel_fb
;
1183 struct drm_i915_gem_object
*obj_priv
;
1184 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1185 int plane
= intel_crtc
->plane
;
1187 if (!i915_powersave
)
1190 if (!I915_HAS_FBC(dev
))
1196 intel_fb
= to_intel_framebuffer(fb
);
1197 obj_priv
= to_intel_bo(intel_fb
->obj
);
1200 * If FBC is already on, we just have to verify that we can
1201 * keep it that way...
1202 * Need to disable if:
1203 * - changing FBC params (stride, fence, mode)
1204 * - new fb is too large to fit in compressed buffer
1205 * - going to an unsupported config (interlace, pixel multiply, etc.)
1207 if (intel_fb
->obj
->size
> dev_priv
->cfb_size
) {
1208 DRM_DEBUG_KMS("framebuffer too large, disabling "
1210 dev_priv
->no_fbc_reason
= FBC_STOLEN_TOO_SMALL
;
1213 if ((mode
->flags
& DRM_MODE_FLAG_INTERLACE
) ||
1214 (mode
->flags
& DRM_MODE_FLAG_DBLSCAN
)) {
1215 DRM_DEBUG_KMS("mode incompatible with compression, "
1217 dev_priv
->no_fbc_reason
= FBC_UNSUPPORTED_MODE
;
1220 if ((mode
->hdisplay
> 2048) ||
1221 (mode
->vdisplay
> 1536)) {
1222 DRM_DEBUG_KMS("mode too large for compression, disabling\n");
1223 dev_priv
->no_fbc_reason
= FBC_MODE_TOO_LARGE
;
1226 if ((IS_I915GM(dev
) || IS_I945GM(dev
)) && plane
!= 0) {
1227 DRM_DEBUG_KMS("plane not 0, disabling compression\n");
1228 dev_priv
->no_fbc_reason
= FBC_BAD_PLANE
;
1231 if (obj_priv
->tiling_mode
!= I915_TILING_X
) {
1232 DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n");
1233 dev_priv
->no_fbc_reason
= FBC_NOT_TILED
;
1237 if (intel_fbc_enabled(dev
)) {
1238 /* We can re-enable it in this case, but need to update pitch */
1239 if ((fb
->pitch
> dev_priv
->cfb_pitch
) ||
1240 (obj_priv
->fence_reg
!= dev_priv
->cfb_fence
) ||
1241 (plane
!= dev_priv
->cfb_plane
))
1242 intel_disable_fbc(dev
);
1245 /* Now try to turn it back on if possible */
1246 if (!intel_fbc_enabled(dev
))
1247 intel_enable_fbc(crtc
, 500);
1252 /* Multiple disables should be harmless */
1253 if (intel_fbc_enabled(dev
)) {
1254 DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
1255 intel_disable_fbc(dev
);
1260 intel_pin_and_fence_fb_obj(struct drm_device
*dev
, struct drm_gem_object
*obj
)
1262 struct drm_i915_gem_object
*obj_priv
= to_intel_bo(obj
);
1266 switch (obj_priv
->tiling_mode
) {
1267 case I915_TILING_NONE
:
1268 alignment
= 64 * 1024;
1271 /* pin() will align the object as required by fence */
1275 /* FIXME: Is this true? */
1276 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1282 ret
= i915_gem_object_pin(obj
, alignment
);
1286 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1287 * fence, whereas 965+ only requires a fence if using
1288 * framebuffer compression. For simplicity, we always install
1289 * a fence as the cost is not that onerous.
1291 if (obj_priv
->fence_reg
== I915_FENCE_REG_NONE
&&
1292 obj_priv
->tiling_mode
!= I915_TILING_NONE
) {
1293 ret
= i915_gem_object_get_fence_reg(obj
);
1295 i915_gem_object_unpin(obj
);
1304 intel_pipe_set_base(struct drm_crtc
*crtc
, int x
, int y
,
1305 struct drm_framebuffer
*old_fb
)
1307 struct drm_device
*dev
= crtc
->dev
;
1308 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1309 struct drm_i915_master_private
*master_priv
;
1310 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1311 struct intel_framebuffer
*intel_fb
;
1312 struct drm_i915_gem_object
*obj_priv
;
1313 struct drm_gem_object
*obj
;
1314 int pipe
= intel_crtc
->pipe
;
1315 int plane
= intel_crtc
->plane
;
1316 unsigned long Start
, Offset
;
1317 int dspbase
= (plane
== 0 ? DSPAADDR
: DSPBADDR
);
1318 int dspsurf
= (plane
== 0 ? DSPASURF
: DSPBSURF
);
1319 int dspstride
= (plane
== 0) ? DSPASTRIDE
: DSPBSTRIDE
;
1320 int dsptileoff
= (plane
== 0 ? DSPATILEOFF
: DSPBTILEOFF
);
1321 int dspcntr_reg
= (plane
== 0) ? DSPACNTR
: DSPBCNTR
;
1327 DRM_DEBUG_KMS("No FB bound\n");
1336 DRM_ERROR("Can't update plane %d in SAREA\n", plane
);
1340 intel_fb
= to_intel_framebuffer(crtc
->fb
);
1341 obj
= intel_fb
->obj
;
1342 obj_priv
= to_intel_bo(obj
);
1344 mutex_lock(&dev
->struct_mutex
);
1345 ret
= intel_pin_and_fence_fb_obj(dev
, obj
);
1347 mutex_unlock(&dev
->struct_mutex
);
1351 ret
= i915_gem_object_set_to_display_plane(obj
);
1353 i915_gem_object_unpin(obj
);
1354 mutex_unlock(&dev
->struct_mutex
);
1358 dspcntr
= I915_READ(dspcntr_reg
);
1359 /* Mask out pixel format bits in case we change it */
1360 dspcntr
&= ~DISPPLANE_PIXFORMAT_MASK
;
1361 switch (crtc
->fb
->bits_per_pixel
) {
1363 dspcntr
|= DISPPLANE_8BPP
;
1366 if (crtc
->fb
->depth
== 15)
1367 dspcntr
|= DISPPLANE_15_16BPP
;
1369 dspcntr
|= DISPPLANE_16BPP
;
1373 if (crtc
->fb
->depth
== 30)
1374 dspcntr
|= DISPPLANE_32BPP_30BIT_NO_ALPHA
;
1376 dspcntr
|= DISPPLANE_32BPP_NO_ALPHA
;
1379 DRM_ERROR("Unknown color depth\n");
1380 i915_gem_object_unpin(obj
);
1381 mutex_unlock(&dev
->struct_mutex
);
1384 if (IS_I965G(dev
)) {
1385 if (obj_priv
->tiling_mode
!= I915_TILING_NONE
)
1386 dspcntr
|= DISPPLANE_TILED
;
1388 dspcntr
&= ~DISPPLANE_TILED
;
1391 if (HAS_PCH_SPLIT(dev
))
1393 dspcntr
|= DISPPLANE_TRICKLE_FEED_DISABLE
;
1395 I915_WRITE(dspcntr_reg
, dspcntr
);
1397 Start
= obj_priv
->gtt_offset
;
1398 Offset
= y
* crtc
->fb
->pitch
+ x
* (crtc
->fb
->bits_per_pixel
/ 8);
1400 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
1401 Start
, Offset
, x
, y
, crtc
->fb
->pitch
);
1402 I915_WRITE(dspstride
, crtc
->fb
->pitch
);
1403 if (IS_I965G(dev
)) {
1404 I915_WRITE(dspbase
, Offset
);
1406 I915_WRITE(dspsurf
, Start
);
1408 I915_WRITE(dsptileoff
, (y
<< 16) | x
);
1410 I915_WRITE(dspbase
, Start
+ Offset
);
1414 if ((IS_I965G(dev
) || plane
== 0))
1415 intel_update_fbc(crtc
, &crtc
->mode
);
1417 intel_wait_for_vblank(dev
);
1420 intel_fb
= to_intel_framebuffer(old_fb
);
1421 obj_priv
= to_intel_bo(intel_fb
->obj
);
1422 i915_gem_object_unpin(intel_fb
->obj
);
1424 intel_increase_pllclock(crtc
, true);
1426 mutex_unlock(&dev
->struct_mutex
);
1428 if (!dev
->primary
->master
)
1431 master_priv
= dev
->primary
->master
->driver_priv
;
1432 if (!master_priv
->sarea_priv
)
1436 master_priv
->sarea_priv
->pipeB_x
= x
;
1437 master_priv
->sarea_priv
->pipeB_y
= y
;
1439 master_priv
->sarea_priv
->pipeA_x
= x
;
1440 master_priv
->sarea_priv
->pipeA_y
= y
;
1446 /* Disable the VGA plane that we never use */
1447 static void i915_disable_vga (struct drm_device
*dev
)
1449 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1453 if (HAS_PCH_SPLIT(dev
))
1454 vga_reg
= CPU_VGACNTRL
;
1458 if (I915_READ(vga_reg
) & VGA_DISP_DISABLE
)
1461 I915_WRITE8(VGA_SR_INDEX
, 1);
1462 sr1
= I915_READ8(VGA_SR_DATA
);
1463 I915_WRITE8(VGA_SR_DATA
, sr1
| (1 << 5));
1466 I915_WRITE(vga_reg
, VGA_DISP_DISABLE
);
1469 static void ironlake_disable_pll_edp (struct drm_crtc
*crtc
)
1471 struct drm_device
*dev
= crtc
->dev
;
1472 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1475 DRM_DEBUG_KMS("\n");
1476 dpa_ctl
= I915_READ(DP_A
);
1477 dpa_ctl
&= ~DP_PLL_ENABLE
;
1478 I915_WRITE(DP_A
, dpa_ctl
);
1481 static void ironlake_enable_pll_edp (struct drm_crtc
*crtc
)
1483 struct drm_device
*dev
= crtc
->dev
;
1484 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1487 dpa_ctl
= I915_READ(DP_A
);
1488 dpa_ctl
|= DP_PLL_ENABLE
;
1489 I915_WRITE(DP_A
, dpa_ctl
);
1494 static void ironlake_set_pll_edp (struct drm_crtc
*crtc
, int clock
)
1496 struct drm_device
*dev
= crtc
->dev
;
1497 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1500 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock
);
1501 dpa_ctl
= I915_READ(DP_A
);
1502 dpa_ctl
&= ~DP_PLL_FREQ_MASK
;
1504 if (clock
< 200000) {
1506 dpa_ctl
|= DP_PLL_FREQ_160MHZ
;
1507 /* workaround for 160Mhz:
1508 1) program 0x4600c bits 15:0 = 0x8124
1509 2) program 0x46010 bit 0 = 1
1510 3) program 0x46034 bit 24 = 1
1511 4) program 0x64000 bit 14 = 1
1513 temp
= I915_READ(0x4600c);
1515 I915_WRITE(0x4600c, temp
| 0x8124);
1517 temp
= I915_READ(0x46010);
1518 I915_WRITE(0x46010, temp
| 1);
1520 temp
= I915_READ(0x46034);
1521 I915_WRITE(0x46034, temp
| (1 << 24));
1523 dpa_ctl
|= DP_PLL_FREQ_270MHZ
;
1525 I915_WRITE(DP_A
, dpa_ctl
);
1530 /* The FDI link training functions for ILK/Ibexpeak. */
1531 static void ironlake_fdi_link_train(struct drm_crtc
*crtc
)
1533 struct drm_device
*dev
= crtc
->dev
;
1534 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1535 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1536 int pipe
= intel_crtc
->pipe
;
1537 int fdi_tx_reg
= (pipe
== 0) ? FDI_TXA_CTL
: FDI_TXB_CTL
;
1538 int fdi_rx_reg
= (pipe
== 0) ? FDI_RXA_CTL
: FDI_RXB_CTL
;
1539 int fdi_rx_iir_reg
= (pipe
== 0) ? FDI_RXA_IIR
: FDI_RXB_IIR
;
1540 int fdi_rx_imr_reg
= (pipe
== 0) ? FDI_RXA_IMR
: FDI_RXB_IMR
;
1541 u32 temp
, tries
= 0;
1543 /* enable CPU FDI TX and PCH FDI RX */
1544 temp
= I915_READ(fdi_tx_reg
);
1545 temp
|= FDI_TX_ENABLE
;
1547 temp
|= (intel_crtc
->fdi_lanes
- 1) << 19;
1548 temp
&= ~FDI_LINK_TRAIN_NONE
;
1549 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
1550 I915_WRITE(fdi_tx_reg
, temp
);
1551 I915_READ(fdi_tx_reg
);
1553 temp
= I915_READ(fdi_rx_reg
);
1554 temp
&= ~FDI_LINK_TRAIN_NONE
;
1555 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
1556 I915_WRITE(fdi_rx_reg
, temp
| FDI_RX_ENABLE
);
1557 I915_READ(fdi_rx_reg
);
1560 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1562 temp
= I915_READ(fdi_rx_imr_reg
);
1563 temp
&= ~FDI_RX_SYMBOL_LOCK
;
1564 temp
&= ~FDI_RX_BIT_LOCK
;
1565 I915_WRITE(fdi_rx_imr_reg
, temp
);
1566 I915_READ(fdi_rx_imr_reg
);
1570 temp
= I915_READ(fdi_rx_iir_reg
);
1571 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp
);
1573 if ((temp
& FDI_RX_BIT_LOCK
)) {
1574 DRM_DEBUG_KMS("FDI train 1 done.\n");
1575 I915_WRITE(fdi_rx_iir_reg
,
1576 temp
| FDI_RX_BIT_LOCK
);
1583 DRM_DEBUG_KMS("FDI train 1 fail!\n");
1589 temp
= I915_READ(fdi_tx_reg
);
1590 temp
&= ~FDI_LINK_TRAIN_NONE
;
1591 temp
|= FDI_LINK_TRAIN_PATTERN_2
;
1592 I915_WRITE(fdi_tx_reg
, temp
);
1594 temp
= I915_READ(fdi_rx_reg
);
1595 temp
&= ~FDI_LINK_TRAIN_NONE
;
1596 temp
|= FDI_LINK_TRAIN_PATTERN_2
;
1597 I915_WRITE(fdi_rx_reg
, temp
);
1603 temp
= I915_READ(fdi_rx_iir_reg
);
1604 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp
);
1606 if (temp
& FDI_RX_SYMBOL_LOCK
) {
1607 I915_WRITE(fdi_rx_iir_reg
,
1608 temp
| FDI_RX_SYMBOL_LOCK
);
1609 DRM_DEBUG_KMS("FDI train 2 done.\n");
1616 DRM_DEBUG_KMS("FDI train 2 fail!\n");
1621 DRM_DEBUG_KMS("FDI train done\n");
1624 static int snb_b_fdi_train_param
[] = {
1625 FDI_LINK_TRAIN_400MV_0DB_SNB_B
,
1626 FDI_LINK_TRAIN_400MV_6DB_SNB_B
,
1627 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B
,
1628 FDI_LINK_TRAIN_800MV_0DB_SNB_B
,
1631 /* The FDI link training functions for SNB/Cougarpoint. */
1632 static void gen6_fdi_link_train(struct drm_crtc
*crtc
)
1634 struct drm_device
*dev
= crtc
->dev
;
1635 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1636 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1637 int pipe
= intel_crtc
->pipe
;
1638 int fdi_tx_reg
= (pipe
== 0) ? FDI_TXA_CTL
: FDI_TXB_CTL
;
1639 int fdi_rx_reg
= (pipe
== 0) ? FDI_RXA_CTL
: FDI_RXB_CTL
;
1640 int fdi_rx_iir_reg
= (pipe
== 0) ? FDI_RXA_IIR
: FDI_RXB_IIR
;
1641 int fdi_rx_imr_reg
= (pipe
== 0) ? FDI_RXA_IMR
: FDI_RXB_IMR
;
1644 /* enable CPU FDI TX and PCH FDI RX */
1645 temp
= I915_READ(fdi_tx_reg
);
1646 temp
|= FDI_TX_ENABLE
;
1648 temp
|= (intel_crtc
->fdi_lanes
- 1) << 19;
1649 temp
&= ~FDI_LINK_TRAIN_NONE
;
1650 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
1651 temp
&= ~FDI_LINK_TRAIN_VOL_EMP_MASK
;
1653 temp
|= FDI_LINK_TRAIN_400MV_0DB_SNB_B
;
1654 I915_WRITE(fdi_tx_reg
, temp
);
1655 I915_READ(fdi_tx_reg
);
1657 temp
= I915_READ(fdi_rx_reg
);
1658 if (HAS_PCH_CPT(dev
)) {
1659 temp
&= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT
;
1660 temp
|= FDI_LINK_TRAIN_PATTERN_1_CPT
;
1662 temp
&= ~FDI_LINK_TRAIN_NONE
;
1663 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
1665 I915_WRITE(fdi_rx_reg
, temp
| FDI_RX_ENABLE
);
1666 I915_READ(fdi_rx_reg
);
1669 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
1671 temp
= I915_READ(fdi_rx_imr_reg
);
1672 temp
&= ~FDI_RX_SYMBOL_LOCK
;
1673 temp
&= ~FDI_RX_BIT_LOCK
;
1674 I915_WRITE(fdi_rx_imr_reg
, temp
);
1675 I915_READ(fdi_rx_imr_reg
);
1678 for (i
= 0; i
< 4; i
++ ) {
1679 temp
= I915_READ(fdi_tx_reg
);
1680 temp
&= ~FDI_LINK_TRAIN_VOL_EMP_MASK
;
1681 temp
|= snb_b_fdi_train_param
[i
];
1682 I915_WRITE(fdi_tx_reg
, temp
);
1685 temp
= I915_READ(fdi_rx_iir_reg
);
1686 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp
);
1688 if (temp
& FDI_RX_BIT_LOCK
) {
1689 I915_WRITE(fdi_rx_iir_reg
,
1690 temp
| FDI_RX_BIT_LOCK
);
1691 DRM_DEBUG_KMS("FDI train 1 done.\n");
1696 DRM_DEBUG_KMS("FDI train 1 fail!\n");
1699 temp
= I915_READ(fdi_tx_reg
);
1700 temp
&= ~FDI_LINK_TRAIN_NONE
;
1701 temp
|= FDI_LINK_TRAIN_PATTERN_2
;
1703 temp
&= ~FDI_LINK_TRAIN_VOL_EMP_MASK
;
1705 temp
|= FDI_LINK_TRAIN_400MV_0DB_SNB_B
;
1707 I915_WRITE(fdi_tx_reg
, temp
);
1709 temp
= I915_READ(fdi_rx_reg
);
1710 if (HAS_PCH_CPT(dev
)) {
1711 temp
&= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT
;
1712 temp
|= FDI_LINK_TRAIN_PATTERN_2_CPT
;
1714 temp
&= ~FDI_LINK_TRAIN_NONE
;
1715 temp
|= FDI_LINK_TRAIN_PATTERN_2
;
1717 I915_WRITE(fdi_rx_reg
, temp
);
1720 for (i
= 0; i
< 4; i
++ ) {
1721 temp
= I915_READ(fdi_tx_reg
);
1722 temp
&= ~FDI_LINK_TRAIN_VOL_EMP_MASK
;
1723 temp
|= snb_b_fdi_train_param
[i
];
1724 I915_WRITE(fdi_tx_reg
, temp
);
1727 temp
= I915_READ(fdi_rx_iir_reg
);
1728 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp
);
1730 if (temp
& FDI_RX_SYMBOL_LOCK
) {
1731 I915_WRITE(fdi_rx_iir_reg
,
1732 temp
| FDI_RX_SYMBOL_LOCK
);
1733 DRM_DEBUG_KMS("FDI train 2 done.\n");
1738 DRM_DEBUG_KMS("FDI train 2 fail!\n");
1740 DRM_DEBUG_KMS("FDI train done.\n");
1743 static void ironlake_crtc_dpms(struct drm_crtc
*crtc
, int mode
)
1745 struct drm_device
*dev
= crtc
->dev
;
1746 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1747 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
1748 int pipe
= intel_crtc
->pipe
;
1749 int plane
= intel_crtc
->plane
;
1750 int pch_dpll_reg
= (pipe
== 0) ? PCH_DPLL_A
: PCH_DPLL_B
;
1751 int pipeconf_reg
= (pipe
== 0) ? PIPEACONF
: PIPEBCONF
;
1752 int dspcntr_reg
= (plane
== 0) ? DSPACNTR
: DSPBCNTR
;
1753 int dspbase_reg
= (plane
== 0) ? DSPAADDR
: DSPBADDR
;
1754 int fdi_tx_reg
= (pipe
== 0) ? FDI_TXA_CTL
: FDI_TXB_CTL
;
1755 int fdi_rx_reg
= (pipe
== 0) ? FDI_RXA_CTL
: FDI_RXB_CTL
;
1756 int transconf_reg
= (pipe
== 0) ? TRANSACONF
: TRANSBCONF
;
1757 int pf_ctl_reg
= (pipe
== 0) ? PFA_CTL_1
: PFB_CTL_1
;
1758 int pf_win_size
= (pipe
== 0) ? PFA_WIN_SZ
: PFB_WIN_SZ
;
1759 int pf_win_pos
= (pipe
== 0) ? PFA_WIN_POS
: PFB_WIN_POS
;
1760 int cpu_htot_reg
= (pipe
== 0) ? HTOTAL_A
: HTOTAL_B
;
1761 int cpu_hblank_reg
= (pipe
== 0) ? HBLANK_A
: HBLANK_B
;
1762 int cpu_hsync_reg
= (pipe
== 0) ? HSYNC_A
: HSYNC_B
;
1763 int cpu_vtot_reg
= (pipe
== 0) ? VTOTAL_A
: VTOTAL_B
;
1764 int cpu_vblank_reg
= (pipe
== 0) ? VBLANK_A
: VBLANK_B
;
1765 int cpu_vsync_reg
= (pipe
== 0) ? VSYNC_A
: VSYNC_B
;
1766 int trans_htot_reg
= (pipe
== 0) ? TRANS_HTOTAL_A
: TRANS_HTOTAL_B
;
1767 int trans_hblank_reg
= (pipe
== 0) ? TRANS_HBLANK_A
: TRANS_HBLANK_B
;
1768 int trans_hsync_reg
= (pipe
== 0) ? TRANS_HSYNC_A
: TRANS_HSYNC_B
;
1769 int trans_vtot_reg
= (pipe
== 0) ? TRANS_VTOTAL_A
: TRANS_VTOTAL_B
;
1770 int trans_vblank_reg
= (pipe
== 0) ? TRANS_VBLANK_A
: TRANS_VBLANK_B
;
1771 int trans_vsync_reg
= (pipe
== 0) ? TRANS_VSYNC_A
: TRANS_VSYNC_B
;
1772 int trans_dpll_sel
= (pipe
== 0) ? 0 : 1;
1777 temp
= I915_READ(pipeconf_reg
);
1778 pipe_bpc
= temp
& PIPE_BPC_MASK
;
1780 /* XXX: When our outputs are all unaware of DPMS modes other than off
1781 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
1784 case DRM_MODE_DPMS_ON
:
1785 case DRM_MODE_DPMS_STANDBY
:
1786 case DRM_MODE_DPMS_SUSPEND
:
1787 DRM_DEBUG_KMS("crtc %d dpms on\n", pipe
);
1789 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
1790 temp
= I915_READ(PCH_LVDS
);
1791 if ((temp
& LVDS_PORT_EN
) == 0) {
1792 I915_WRITE(PCH_LVDS
, temp
| LVDS_PORT_EN
);
1793 POSTING_READ(PCH_LVDS
);
1798 /* enable eDP PLL */
1799 ironlake_enable_pll_edp(crtc
);
1802 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
1803 temp
= I915_READ(fdi_rx_reg
);
1805 * make the BPC in FDI Rx be consistent with that in
1808 temp
&= ~(0x7 << 16);
1809 temp
|= (pipe_bpc
<< 11);
1811 temp
|= (intel_crtc
->fdi_lanes
- 1) << 19;
1812 I915_WRITE(fdi_rx_reg
, temp
| FDI_RX_PLL_ENABLE
);
1813 I915_READ(fdi_rx_reg
);
1816 /* Switch from Rawclk to PCDclk */
1817 temp
= I915_READ(fdi_rx_reg
);
1818 I915_WRITE(fdi_rx_reg
, temp
| FDI_SEL_PCDCLK
);
1819 I915_READ(fdi_rx_reg
);
1822 /* Enable CPU FDI TX PLL, always on for Ironlake */
1823 temp
= I915_READ(fdi_tx_reg
);
1824 if ((temp
& FDI_TX_PLL_ENABLE
) == 0) {
1825 I915_WRITE(fdi_tx_reg
, temp
| FDI_TX_PLL_ENABLE
);
1826 I915_READ(fdi_tx_reg
);
1831 /* Enable panel fitting for LVDS */
1832 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
1833 temp
= I915_READ(pf_ctl_reg
);
1834 I915_WRITE(pf_ctl_reg
, temp
| PF_ENABLE
| PF_FILTER_MED_3x3
);
1836 /* currently full aspect */
1837 I915_WRITE(pf_win_pos
, 0);
1839 I915_WRITE(pf_win_size
,
1840 (dev_priv
->panel_fixed_mode
->hdisplay
<< 16) |
1841 (dev_priv
->panel_fixed_mode
->vdisplay
));
1844 /* Enable CPU pipe */
1845 temp
= I915_READ(pipeconf_reg
);
1846 if ((temp
& PIPEACONF_ENABLE
) == 0) {
1847 I915_WRITE(pipeconf_reg
, temp
| PIPEACONF_ENABLE
);
1848 I915_READ(pipeconf_reg
);
1852 /* configure and enable CPU plane */
1853 temp
= I915_READ(dspcntr_reg
);
1854 if ((temp
& DISPLAY_PLANE_ENABLE
) == 0) {
1855 I915_WRITE(dspcntr_reg
, temp
| DISPLAY_PLANE_ENABLE
);
1856 /* Flush the plane changes */
1857 I915_WRITE(dspbase_reg
, I915_READ(dspbase_reg
));
1861 /* For PCH output, training FDI link */
1863 gen6_fdi_link_train(crtc
);
1865 ironlake_fdi_link_train(crtc
);
1867 /* enable PCH DPLL */
1868 temp
= I915_READ(pch_dpll_reg
);
1869 if ((temp
& DPLL_VCO_ENABLE
) == 0) {
1870 I915_WRITE(pch_dpll_reg
, temp
| DPLL_VCO_ENABLE
);
1871 I915_READ(pch_dpll_reg
);
1875 if (HAS_PCH_CPT(dev
)) {
1876 /* Be sure PCH DPLL SEL is set */
1877 temp
= I915_READ(PCH_DPLL_SEL
);
1878 if (trans_dpll_sel
== 0 &&
1879 (temp
& TRANSA_DPLL_ENABLE
) == 0)
1880 temp
|= (TRANSA_DPLL_ENABLE
| TRANSA_DPLLA_SEL
);
1881 else if (trans_dpll_sel
== 1 &&
1882 (temp
& TRANSB_DPLL_ENABLE
) == 0)
1883 temp
|= (TRANSB_DPLL_ENABLE
| TRANSB_DPLLB_SEL
);
1884 I915_WRITE(PCH_DPLL_SEL
, temp
);
1885 I915_READ(PCH_DPLL_SEL
);
1888 /* set transcoder timing */
1889 I915_WRITE(trans_htot_reg
, I915_READ(cpu_htot_reg
));
1890 I915_WRITE(trans_hblank_reg
, I915_READ(cpu_hblank_reg
));
1891 I915_WRITE(trans_hsync_reg
, I915_READ(cpu_hsync_reg
));
1893 I915_WRITE(trans_vtot_reg
, I915_READ(cpu_vtot_reg
));
1894 I915_WRITE(trans_vblank_reg
, I915_READ(cpu_vblank_reg
));
1895 I915_WRITE(trans_vsync_reg
, I915_READ(cpu_vsync_reg
));
1897 /* enable normal train */
1898 temp
= I915_READ(fdi_tx_reg
);
1899 temp
&= ~FDI_LINK_TRAIN_NONE
;
1900 I915_WRITE(fdi_tx_reg
, temp
| FDI_LINK_TRAIN_NONE
|
1901 FDI_TX_ENHANCE_FRAME_ENABLE
);
1902 I915_READ(fdi_tx_reg
);
1904 temp
= I915_READ(fdi_rx_reg
);
1905 if (HAS_PCH_CPT(dev
)) {
1906 temp
&= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT
;
1907 temp
|= FDI_LINK_TRAIN_NORMAL_CPT
;
1909 temp
&= ~FDI_LINK_TRAIN_NONE
;
1910 temp
|= FDI_LINK_TRAIN_NONE
;
1912 I915_WRITE(fdi_rx_reg
, temp
| FDI_RX_ENHANCE_FRAME_ENABLE
);
1913 I915_READ(fdi_rx_reg
);
1915 /* wait one idle pattern time */
1918 /* For PCH DP, enable TRANS_DP_CTL */
1919 if (HAS_PCH_CPT(dev
) &&
1920 intel_pipe_has_type(crtc
, INTEL_OUTPUT_DISPLAYPORT
)) {
1921 int trans_dp_ctl
= (pipe
== 0) ? TRANS_DP_CTL_A
: TRANS_DP_CTL_B
;
1924 reg
= I915_READ(trans_dp_ctl
);
1925 reg
&= ~TRANS_DP_PORT_SEL_MASK
;
1926 reg
= TRANS_DP_OUTPUT_ENABLE
|
1927 TRANS_DP_ENH_FRAMING
|
1928 TRANS_DP_VSYNC_ACTIVE_HIGH
|
1929 TRANS_DP_HSYNC_ACTIVE_HIGH
;
1931 switch (intel_trans_dp_port_sel(crtc
)) {
1933 reg
|= TRANS_DP_PORT_SEL_B
;
1936 reg
|= TRANS_DP_PORT_SEL_C
;
1939 reg
|= TRANS_DP_PORT_SEL_D
;
1942 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
1943 reg
|= TRANS_DP_PORT_SEL_B
;
1947 I915_WRITE(trans_dp_ctl
, reg
);
1948 POSTING_READ(trans_dp_ctl
);
1951 /* enable PCH transcoder */
1952 temp
= I915_READ(transconf_reg
);
1954 * make the BPC in transcoder be consistent with
1955 * that in pipeconf reg.
1957 temp
&= ~PIPE_BPC_MASK
;
1959 I915_WRITE(transconf_reg
, temp
| TRANS_ENABLE
);
1960 I915_READ(transconf_reg
);
1962 while ((I915_READ(transconf_reg
) & TRANS_STATE_ENABLE
) == 0)
1967 intel_crtc_load_lut(crtc
);
1970 case DRM_MODE_DPMS_OFF
:
1971 DRM_DEBUG_KMS("crtc %d dpms off\n", pipe
);
1973 drm_vblank_off(dev
, pipe
);
1974 /* Disable display plane */
1975 temp
= I915_READ(dspcntr_reg
);
1976 if ((temp
& DISPLAY_PLANE_ENABLE
) != 0) {
1977 I915_WRITE(dspcntr_reg
, temp
& ~DISPLAY_PLANE_ENABLE
);
1978 /* Flush the plane changes */
1979 I915_WRITE(dspbase_reg
, I915_READ(dspbase_reg
));
1980 I915_READ(dspbase_reg
);
1983 i915_disable_vga(dev
);
1985 /* disable cpu pipe, disable after all planes disabled */
1986 temp
= I915_READ(pipeconf_reg
);
1987 if ((temp
& PIPEACONF_ENABLE
) != 0) {
1988 I915_WRITE(pipeconf_reg
, temp
& ~PIPEACONF_ENABLE
);
1989 I915_READ(pipeconf_reg
);
1991 /* wait for cpu pipe off, pipe state */
1992 while ((I915_READ(pipeconf_reg
) & I965_PIPECONF_ACTIVE
) != 0) {
1998 DRM_DEBUG_KMS("pipe %d off delay\n",
2004 DRM_DEBUG_KMS("crtc %d is disabled\n", pipe
);
2009 temp
= I915_READ(pf_ctl_reg
);
2010 if ((temp
& PF_ENABLE
) != 0) {
2011 I915_WRITE(pf_ctl_reg
, temp
& ~PF_ENABLE
);
2012 I915_READ(pf_ctl_reg
);
2014 I915_WRITE(pf_win_size
, 0);
2015 POSTING_READ(pf_win_size
);
2018 /* disable CPU FDI tx and PCH FDI rx */
2019 temp
= I915_READ(fdi_tx_reg
);
2020 I915_WRITE(fdi_tx_reg
, temp
& ~FDI_TX_ENABLE
);
2021 I915_READ(fdi_tx_reg
);
2023 temp
= I915_READ(fdi_rx_reg
);
2024 /* BPC in FDI rx is consistent with that in pipeconf */
2025 temp
&= ~(0x07 << 16);
2026 temp
|= (pipe_bpc
<< 11);
2027 I915_WRITE(fdi_rx_reg
, temp
& ~FDI_RX_ENABLE
);
2028 I915_READ(fdi_rx_reg
);
2032 /* still set train pattern 1 */
2033 temp
= I915_READ(fdi_tx_reg
);
2034 temp
&= ~FDI_LINK_TRAIN_NONE
;
2035 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
2036 I915_WRITE(fdi_tx_reg
, temp
);
2037 POSTING_READ(fdi_tx_reg
);
2039 temp
= I915_READ(fdi_rx_reg
);
2040 if (HAS_PCH_CPT(dev
)) {
2041 temp
&= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT
;
2042 temp
|= FDI_LINK_TRAIN_PATTERN_1_CPT
;
2044 temp
&= ~FDI_LINK_TRAIN_NONE
;
2045 temp
|= FDI_LINK_TRAIN_PATTERN_1
;
2047 I915_WRITE(fdi_rx_reg
, temp
);
2048 POSTING_READ(fdi_rx_reg
);
2052 if (intel_pipe_has_type(crtc
, INTEL_OUTPUT_LVDS
)) {
2053 temp
= I915_READ(PCH_LVDS
);
2054 I915_WRITE(PCH_LVDS
, temp
& ~LVDS_PORT_EN
);
2055 I915_READ(PCH_LVDS
);
2059 /* disable PCH transcoder */
2060 temp
= I915_READ(transconf_reg
);
2061 if ((temp
& TRANS_ENABLE
) != 0) {
2062 I915_WRITE(transconf_reg
, temp
& ~TRANS_ENABLE
);
2063 I915_READ(transconf_reg
);
2065 /* wait for PCH transcoder off, transcoder state */
2066 while ((I915_READ(transconf_reg
) & TRANS_STATE_ENABLE
) != 0) {
2072 DRM_DEBUG_KMS("transcoder %d off "
2079 temp
= I915_READ(transconf_reg
);
2080 /* BPC in transcoder is consistent with that in pipeconf */
2081 temp
&= ~PIPE_BPC_MASK
;
2083 I915_WRITE(transconf_reg
, temp
);
2084 I915_READ(transconf_reg
);
2087 if (HAS_PCH_CPT(dev
)) {
2088 /* disable TRANS_DP_CTL */
2089 int trans_dp_ctl
= (pipe
== 0) ? TRANS_DP_CTL_A
: TRANS_DP_CTL_B
;
2092 reg
= I915_READ(trans_dp_ctl
);
2093 reg
&= ~(TRANS_DP_OUTPUT_ENABLE
| TRANS_DP_PORT_SEL_MASK
);
2094 I915_WRITE(trans_dp_ctl
, reg
);
2095 POSTING_READ(trans_dp_ctl
);
2097 /* disable DPLL_SEL */
2098 temp
= I915_READ(PCH_DPLL_SEL
);
2099 if (trans_dpll_sel
== 0)
2100 temp
&= ~(TRANSA_DPLL_ENABLE
| TRANSA_DPLLB_SEL
);
2102 temp
&= ~(TRANSB_DPLL_ENABLE
| TRANSB_DPLLB_SEL
);
2103 I915_WRITE(PCH_DPLL_SEL
, temp
);
2104 I915_READ(PCH_DPLL_SEL
);
2108 /* disable PCH DPLL */
2109 temp
= I915_READ(pch_dpll_reg
);
2110 I915_WRITE(pch_dpll_reg
, temp
& ~DPLL_VCO_ENABLE
);
2111 I915_READ(pch_dpll_reg
);
2114 ironlake_disable_pll_edp(crtc
);
2117 /* Switch from PCDclk to Rawclk */
2118 temp
= I915_READ(fdi_rx_reg
);
2119 temp
&= ~FDI_SEL_PCDCLK
;
2120 I915_WRITE(fdi_rx_reg
, temp
);
2121 I915_READ(fdi_rx_reg
);
2123 /* Disable CPU FDI TX PLL */
2124 temp
= I915_READ(fdi_tx_reg
);
2125 I915_WRITE(fdi_tx_reg
, temp
& ~FDI_TX_PLL_ENABLE
);
2126 I915_READ(fdi_tx_reg
);
2129 temp
= I915_READ(fdi_rx_reg
);
2130 temp
&= ~FDI_RX_PLL_ENABLE
;
2131 I915_WRITE(fdi_rx_reg
, temp
);
2132 I915_READ(fdi_rx_reg
);
2134 /* Wait for the clocks to turn off. */
2140 static void intel_crtc_dpms_overlay(struct intel_crtc
*intel_crtc
, bool enable
)
2142 struct intel_overlay
*overlay
;
2145 if (!enable
&& intel_crtc
->overlay
) {
2146 overlay
= intel_crtc
->overlay
;
2147 mutex_lock(&overlay
->dev
->struct_mutex
);
2149 ret
= intel_overlay_switch_off(overlay
);
2153 ret
= intel_overlay_recover_from_interrupt(overlay
, 0);
2155 /* overlay doesn't react anymore. Usually
2156 * results in a black screen and an unkillable
2159 overlay
->hw_wedged
= HW_WEDGED
;
2163 mutex_unlock(&overlay
->dev
->struct_mutex
);
2165 /* Let userspace switch the overlay on again. In most cases userspace
2166 * has to recompute where to put it anyway. */
2171 static void i9xx_crtc_dpms(struct drm_crtc
*crtc
, int mode
)
2173 struct drm_device
*dev
= crtc
->dev
;
2174 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2175 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
2176 int pipe
= intel_crtc
->pipe
;
2177 int plane
= intel_crtc
->plane
;
2178 int dpll_reg
= (pipe
== 0) ? DPLL_A
: DPLL_B
;
2179 int dspcntr_reg
= (plane
== 0) ? DSPACNTR
: DSPBCNTR
;
2180 int dspbase_reg
= (plane
== 0) ? DSPAADDR
: DSPBADDR
;
2181 int pipeconf_reg
= (pipe
== 0) ? PIPEACONF
: PIPEBCONF
;
2184 /* XXX: When our outputs are all unaware of DPMS modes other than off
2185 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
2188 case DRM_MODE_DPMS_ON
:
2189 case DRM_MODE_DPMS_STANDBY
:
2190 case DRM_MODE_DPMS_SUSPEND
:
2191 intel_update_watermarks(dev
);
2193 /* Enable the DPLL */
2194 temp
= I915_READ(dpll_reg
);
2195 if ((temp
& DPLL_VCO_ENABLE
) == 0) {
2196 I915_WRITE(dpll_reg
, temp
);
2197 I915_READ(dpll_reg
);
2198 /* Wait for the clocks to stabilize. */
2200 I915_WRITE(dpll_reg
, temp
| DPLL_VCO_ENABLE
);
2201 I915_READ(dpll_reg
);
2202 /* Wait for the clocks to stabilize. */
2204 I915_WRITE(dpll_reg
, temp
| DPLL_VCO_ENABLE
);
2205 I915_READ(dpll_reg
);
2206 /* Wait for the clocks to stabilize. */
2210 /* Enable the pipe */
2211 temp
= I915_READ(pipeconf_reg
);
2212 if ((temp
& PIPEACONF_ENABLE
) == 0)
2213 I915_WRITE(pipeconf_reg
, temp
| PIPEACONF_ENABLE
);
2215 /* Enable the plane */
2216 temp
= I915_READ(dspcntr_reg
);
2217 if ((temp
& DISPLAY_PLANE_ENABLE
) == 0) {
2218 I915_WRITE(dspcntr_reg
, temp
| DISPLAY_PLANE_ENABLE
);
2219 /* Flush the plane changes */
2220 I915_WRITE(dspbase_reg
, I915_READ(dspbase_reg
));
2223 intel_crtc_load_lut(crtc
);
2225 if ((IS_I965G(dev
) || plane
== 0))
2226 intel_update_fbc(crtc
, &crtc
->mode
);
2228 /* Give the overlay scaler a chance to enable if it's on this pipe */
2229 intel_crtc_dpms_overlay(intel_crtc
, true);
2231 case DRM_MODE_DPMS_OFF
:
2232 intel_update_watermarks(dev
);
2234 /* Give the overlay scaler a chance to disable if it's on this pipe */
2235 intel_crtc_dpms_overlay(intel_crtc
, false);
2236 drm_vblank_off(dev
, pipe
);
2238 if (dev_priv
->cfb_plane
== plane
&&
2239 dev_priv
->display
.disable_fbc
)
2240 dev_priv
->display
.disable_fbc(dev
);
2242 /* Disable the VGA plane that we never use */
2243 i915_disable_vga(dev
);
2245 /* Disable display plane */
2246 temp
= I915_READ(dspcntr_reg
);
2247 if ((temp
& DISPLAY_PLANE_ENABLE
) != 0) {
2248 I915_WRITE(dspcntr_reg
, temp
& ~DISPLAY_PLANE_ENABLE
);
2249 /* Flush the plane changes */
2250 I915_WRITE(dspbase_reg
, I915_READ(dspbase_reg
));
2251 I915_READ(dspbase_reg
);
2254 if (!IS_I9XX(dev
)) {
2255 /* Wait for vblank for the disable to take effect */
2256 intel_wait_for_vblank(dev
);
2259 /* Next, disable display pipes */
2260 temp
= I915_READ(pipeconf_reg
);
2261 if ((temp
& PIPEACONF_ENABLE
) != 0) {
2262 I915_WRITE(pipeconf_reg
, temp
& ~PIPEACONF_ENABLE
);
2263 I915_READ(pipeconf_reg
);
2266 /* Wait for vblank for the disable to take effect. */
2267 intel_wait_for_vblank(dev
);
2269 temp
= I915_READ(dpll_reg
);
2270 if ((temp
& DPLL_VCO_ENABLE
) != 0) {
2271 I915_WRITE(dpll_reg
, temp
& ~DPLL_VCO_ENABLE
);
2272 I915_READ(dpll_reg
);
2275 /* Wait for the clocks to turn off. */
2282 * Sets the power management mode of the pipe and plane.
2284 * This code should probably grow support for turning the cursor off and back
2285 * on appropriately at the same time as we're turning the pipe off/on.
2287 static void intel_crtc_dpms(struct drm_crtc
*crtc
, int mode
)
2289 struct drm_device
*dev
= crtc
->dev
;
2290 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2291 struct drm_i915_master_private
*master_priv
;
2292 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
2293 int pipe
= intel_crtc
->pipe
;
2296 dev_priv
->display
.dpms(crtc
, mode
);
2298 intel_crtc
->dpms_mode
= mode
;
2300 if (!dev
->primary
->master
)
2303 master_priv
= dev
->primary
->master
->driver_priv
;
2304 if (!master_priv
->sarea_priv
)
2307 enabled
= crtc
->enabled
&& mode
!= DRM_MODE_DPMS_OFF
;
2311 master_priv
->sarea_priv
->pipeA_w
= enabled
? crtc
->mode
.hdisplay
: 0;
2312 master_priv
->sarea_priv
->pipeA_h
= enabled
? crtc
->mode
.vdisplay
: 0;
2315 master_priv
->sarea_priv
->pipeB_w
= enabled
? crtc
->mode
.hdisplay
: 0;
2316 master_priv
->sarea_priv
->pipeB_h
= enabled
? crtc
->mode
.vdisplay
: 0;
2319 DRM_ERROR("Can't update pipe %d in SAREA\n", pipe
);
2324 static void intel_crtc_prepare (struct drm_crtc
*crtc
)
2326 struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
2327 crtc_funcs
->dpms(crtc
, DRM_MODE_DPMS_OFF
);
2330 static void intel_crtc_commit (struct drm_crtc
*crtc
)
2332 struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
2333 crtc_funcs
->dpms(crtc
, DRM_MODE_DPMS_ON
);
2336 void intel_encoder_prepare (struct drm_encoder
*encoder
)
2338 struct drm_encoder_helper_funcs
*encoder_funcs
= encoder
->helper_private
;
2339 /* lvds has its own version of prepare see intel_lvds_prepare */
2340 encoder_funcs
->dpms(encoder
, DRM_MODE_DPMS_OFF
);
2343 void intel_encoder_commit (struct drm_encoder
*encoder
)
2345 struct drm_encoder_helper_funcs
*encoder_funcs
= encoder
->helper_private
;
2346 /* lvds has its own version of commit see intel_lvds_commit */
2347 encoder_funcs
->dpms(encoder
, DRM_MODE_DPMS_ON
);
2350 static bool intel_crtc_mode_fixup(struct drm_crtc
*crtc
,
2351 struct drm_display_mode
*mode
,
2352 struct drm_display_mode
*adjusted_mode
)
2354 struct drm_device
*dev
= crtc
->dev
;
2355 if (HAS_PCH_SPLIT(dev
)) {
2356 /* FDI link clock is fixed at 2.7G */
2357 if (mode
->clock
* 3 > 27000 * 4)
2358 return MODE_CLOCK_HIGH
;
2361 drm_mode_set_crtcinfo(adjusted_mode
, 0);
2365 static int i945_get_display_clock_speed(struct drm_device
*dev
)
2370 static int i915_get_display_clock_speed(struct drm_device
*dev
)
2375 static int i9xx_misc_get_display_clock_speed(struct drm_device
*dev
)
2380 static int i915gm_get_display_clock_speed(struct drm_device
*dev
)
2384 pci_read_config_word(dev
->pdev
, GCFGC
, &gcfgc
);
2386 if (gcfgc
& GC_LOW_FREQUENCY_ENABLE
)
2389 switch (gcfgc
& GC_DISPLAY_CLOCK_MASK
) {
2390 case GC_DISPLAY_CLOCK_333_MHZ
:
2393 case GC_DISPLAY_CLOCK_190_200_MHZ
:
2399 static int i865_get_display_clock_speed(struct drm_device
*dev
)
2404 static int i855_get_display_clock_speed(struct drm_device
*dev
)
2407 /* Assume that the hardware is in the high speed state. This
2408 * should be the default.
2410 switch (hpllcc
& GC_CLOCK_CONTROL_MASK
) {
2411 case GC_CLOCK_133_200
:
2412 case GC_CLOCK_100_200
:
2414 case GC_CLOCK_166_250
:
2416 case GC_CLOCK_100_133
:
2420 /* Shouldn't happen */
2424 static int i830_get_display_clock_speed(struct drm_device
*dev
)
2430 * Return the pipe currently connected to the panel fitter,
2431 * or -1 if the panel fitter is not present or not in use
2433 int intel_panel_fitter_pipe (struct drm_device
*dev
)
2435 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2438 /* i830 doesn't have a panel fitter */
2442 pfit_control
= I915_READ(PFIT_CONTROL
);
2444 /* See if the panel fitter is in use */
2445 if ((pfit_control
& PFIT_ENABLE
) == 0)
2448 /* 965 can place panel fitter on either pipe */
2450 return (pfit_control
>> 29) & 0x3;
2452 /* older chips can only use pipe 1 */
2465 fdi_reduce_ratio(u32
*num
, u32
*den
)
2467 while (*num
> 0xffffff || *den
> 0xffffff) {
2473 #define DATA_N 0x800000
2474 #define LINK_N 0x80000
2477 ironlake_compute_m_n(int bits_per_pixel
, int nlanes
, int pixel_clock
,
2478 int link_clock
, struct fdi_m_n
*m_n
)
2482 m_n
->tu
= 64; /* default size */
2484 temp
= (u64
) DATA_N
* pixel_clock
;
2485 temp
= div_u64(temp
, link_clock
);
2486 m_n
->gmch_m
= div_u64(temp
* bits_per_pixel
, nlanes
);
2487 m_n
->gmch_m
>>= 3; /* convert to bytes_per_pixel */
2488 m_n
->gmch_n
= DATA_N
;
2489 fdi_reduce_ratio(&m_n
->gmch_m
, &m_n
->gmch_n
);
2491 temp
= (u64
) LINK_N
* pixel_clock
;
2492 m_n
->link_m
= div_u64(temp
, link_clock
);
2493 m_n
->link_n
= LINK_N
;
2494 fdi_reduce_ratio(&m_n
->link_m
, &m_n
->link_n
);
2498 struct intel_watermark_params
{
2499 unsigned long fifo_size
;
2500 unsigned long max_wm
;
2501 unsigned long default_wm
;
2502 unsigned long guard_size
;
2503 unsigned long cacheline_size
;
2506 /* Pineview has different values for various configs */
2507 static struct intel_watermark_params pineview_display_wm
= {
2508 PINEVIEW_DISPLAY_FIFO
,
2512 PINEVIEW_FIFO_LINE_SIZE
2514 static struct intel_watermark_params pineview_display_hplloff_wm
= {
2515 PINEVIEW_DISPLAY_FIFO
,
2517 PINEVIEW_DFT_HPLLOFF_WM
,
2519 PINEVIEW_FIFO_LINE_SIZE
2521 static struct intel_watermark_params pineview_cursor_wm
= {
2522 PINEVIEW_CURSOR_FIFO
,
2523 PINEVIEW_CURSOR_MAX_WM
,
2524 PINEVIEW_CURSOR_DFT_WM
,
2525 PINEVIEW_CURSOR_GUARD_WM
,
2526 PINEVIEW_FIFO_LINE_SIZE
,
2528 static struct intel_watermark_params pineview_cursor_hplloff_wm
= {
2529 PINEVIEW_CURSOR_FIFO
,
2530 PINEVIEW_CURSOR_MAX_WM
,
2531 PINEVIEW_CURSOR_DFT_WM
,
2532 PINEVIEW_CURSOR_GUARD_WM
,
2533 PINEVIEW_FIFO_LINE_SIZE
2535 static struct intel_watermark_params g4x_wm_info
= {
2542 static struct intel_watermark_params g4x_cursor_wm_info
= {
2549 static struct intel_watermark_params i965_cursor_wm_info
= {
2554 I915_FIFO_LINE_SIZE
,
2556 static struct intel_watermark_params i945_wm_info
= {
2563 static struct intel_watermark_params i915_wm_info
= {
2570 static struct intel_watermark_params i855_wm_info
= {
2577 static struct intel_watermark_params i830_wm_info
= {
2585 static struct intel_watermark_params ironlake_display_wm_info
= {
2593 static struct intel_watermark_params ironlake_display_srwm_info
= {
2594 ILK_DISPLAY_SR_FIFO
,
2595 ILK_DISPLAY_MAX_SRWM
,
2596 ILK_DISPLAY_DFT_SRWM
,
2601 static struct intel_watermark_params ironlake_cursor_srwm_info
= {
2603 ILK_CURSOR_MAX_SRWM
,
2604 ILK_CURSOR_DFT_SRWM
,
2610 * intel_calculate_wm - calculate watermark level
2611 * @clock_in_khz: pixel clock
2612 * @wm: chip FIFO params
2613 * @pixel_size: display pixel size
2614 * @latency_ns: memory latency for the platform
2616 * Calculate the watermark level (the level at which the display plane will
2617 * start fetching from memory again). Each chip has a different display
2618 * FIFO size and allocation, so the caller needs to figure that out and pass
2619 * in the correct intel_watermark_params structure.
2621 * As the pixel clock runs, the FIFO will be drained at a rate that depends
2622 * on the pixel size. When it reaches the watermark level, it'll start
2623 * fetching FIFO line sized based chunks from memory until the FIFO fills
2624 * past the watermark point. If the FIFO drains completely, a FIFO underrun
2625 * will occur, and a display engine hang could result.
2627 static unsigned long intel_calculate_wm(unsigned long clock_in_khz
,
2628 struct intel_watermark_params
*wm
,
2630 unsigned long latency_ns
)
2632 long entries_required
, wm_size
;
2635 * Note: we need to make sure we don't overflow for various clock &
2637 * clocks go from a few thousand to several hundred thousand.
2638 * latency is usually a few thousand
2640 entries_required
= ((clock_in_khz
/ 1000) * pixel_size
* latency_ns
) /
2642 entries_required
/= wm
->cacheline_size
;
2644 DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required
);
2646 wm_size
= wm
->fifo_size
- (entries_required
+ wm
->guard_size
);
2648 DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size
);
2650 /* Don't promote wm_size to unsigned... */
2651 if (wm_size
> (long)wm
->max_wm
)
2652 wm_size
= wm
->max_wm
;
2654 wm_size
= wm
->default_wm
;
2658 struct cxsr_latency
{
2661 unsigned long fsb_freq
;
2662 unsigned long mem_freq
;
2663 unsigned long display_sr
;
2664 unsigned long display_hpll_disable
;
2665 unsigned long cursor_sr
;
2666 unsigned long cursor_hpll_disable
;
2669 static struct cxsr_latency cxsr_latency_table
[] = {
2670 {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */
2671 {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */
2672 {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */
2673 {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */
2674 {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */
2676 {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */
2677 {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */
2678 {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */
2679 {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */
2680 {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */
2682 {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */
2683 {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */
2684 {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */
2685 {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */
2686 {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */
2688 {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */
2689 {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */
2690 {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */
2691 {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */
2692 {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */
2694 {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */
2695 {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */
2696 {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */
2697 {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */
2698 {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */
2700 {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */
2701 {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */
2702 {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */
2703 {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */
2704 {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */
2707 static struct cxsr_latency
*intel_get_cxsr_latency(int is_desktop
, int is_ddr3
,
2711 struct cxsr_latency
*latency
;
2713 if (fsb
== 0 || mem
== 0)
2716 for (i
= 0; i
< ARRAY_SIZE(cxsr_latency_table
); i
++) {
2717 latency
= &cxsr_latency_table
[i
];
2718 if (is_desktop
== latency
->is_desktop
&&
2719 is_ddr3
== latency
->is_ddr3
&&
2720 fsb
== latency
->fsb_freq
&& mem
== latency
->mem_freq
)
2724 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2729 static void pineview_disable_cxsr(struct drm_device
*dev
)
2731 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2734 /* deactivate cxsr */
2735 reg
= I915_READ(DSPFW3
);
2736 reg
&= ~(PINEVIEW_SELF_REFRESH_EN
);
2737 I915_WRITE(DSPFW3
, reg
);
2738 DRM_INFO("Big FIFO is disabled\n");
2742 * Latency for FIFO fetches is dependent on several factors:
2743 * - memory configuration (speed, channels)
2745 * - current MCH state
2746 * It can be fairly high in some situations, so here we assume a fairly
2747 * pessimal value. It's a tradeoff between extra memory fetches (if we
2748 * set this value too high, the FIFO will fetch frequently to stay full)
2749 * and power consumption (set it too low to save power and we might see
2750 * FIFO underruns and display "flicker").
2752 * A value of 5us seems to be a good balance; safe for very low end
2753 * platforms but not overly aggressive on lower latency configs.
2755 static const int latency_ns
= 5000;
2757 static int i9xx_get_fifo_size(struct drm_device
*dev
, int plane
)
2759 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2760 uint32_t dsparb
= I915_READ(DSPARB
);
2764 size
= dsparb
& 0x7f;
2766 size
= ((dsparb
>> DSPARB_CSTART_SHIFT
) & 0x7f) -
2769 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb
,
2770 plane
? "B" : "A", size
);
2775 static int i85x_get_fifo_size(struct drm_device
*dev
, int plane
)
2777 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2778 uint32_t dsparb
= I915_READ(DSPARB
);
2782 size
= dsparb
& 0x1ff;
2784 size
= ((dsparb
>> DSPARB_BEND_SHIFT
) & 0x1ff) -
2786 size
>>= 1; /* Convert to cachelines */
2788 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb
,
2789 plane
? "B" : "A", size
);
2794 static int i845_get_fifo_size(struct drm_device
*dev
, int plane
)
2796 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2797 uint32_t dsparb
= I915_READ(DSPARB
);
2800 size
= dsparb
& 0x7f;
2801 size
>>= 2; /* Convert to cachelines */
2803 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb
,
2810 static int i830_get_fifo_size(struct drm_device
*dev
, int plane
)
2812 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2813 uint32_t dsparb
= I915_READ(DSPARB
);
2816 size
= dsparb
& 0x7f;
2817 size
>>= 1; /* Convert to cachelines */
2819 DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb
,
2820 plane
? "B" : "A", size
);
2825 static void pineview_update_wm(struct drm_device
*dev
, int planea_clock
,
2826 int planeb_clock
, int sr_hdisplay
, int unused
,
2829 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2832 struct cxsr_latency
*latency
;
2835 latency
= intel_get_cxsr_latency(IS_PINEVIEW_G(dev
), dev_priv
->is_ddr3
,
2836 dev_priv
->fsb_freq
, dev_priv
->mem_freq
);
2838 DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
2839 pineview_disable_cxsr(dev
);
2843 if (!planea_clock
|| !planeb_clock
) {
2844 sr_clock
= planea_clock
? planea_clock
: planeb_clock
;
2847 wm
= intel_calculate_wm(sr_clock
, &pineview_display_wm
,
2848 pixel_size
, latency
->display_sr
);
2849 reg
= I915_READ(DSPFW1
);
2850 reg
&= ~DSPFW_SR_MASK
;
2851 reg
|= wm
<< DSPFW_SR_SHIFT
;
2852 I915_WRITE(DSPFW1
, reg
);
2853 DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg
);
2856 wm
= intel_calculate_wm(sr_clock
, &pineview_cursor_wm
,
2857 pixel_size
, latency
->cursor_sr
);
2858 reg
= I915_READ(DSPFW3
);
2859 reg
&= ~DSPFW_CURSOR_SR_MASK
;
2860 reg
|= (wm
& 0x3f) << DSPFW_CURSOR_SR_SHIFT
;
2861 I915_WRITE(DSPFW3
, reg
);
2863 /* Display HPLL off SR */
2864 wm
= intel_calculate_wm(sr_clock
, &pineview_display_hplloff_wm
,
2865 pixel_size
, latency
->display_hpll_disable
);
2866 reg
= I915_READ(DSPFW3
);
2867 reg
&= ~DSPFW_HPLL_SR_MASK
;
2868 reg
|= wm
& DSPFW_HPLL_SR_MASK
;
2869 I915_WRITE(DSPFW3
, reg
);
2871 /* cursor HPLL off SR */
2872 wm
= intel_calculate_wm(sr_clock
, &pineview_cursor_hplloff_wm
,
2873 pixel_size
, latency
->cursor_hpll_disable
);
2874 reg
= I915_READ(DSPFW3
);
2875 reg
&= ~DSPFW_HPLL_CURSOR_MASK
;
2876 reg
|= (wm
& 0x3f) << DSPFW_HPLL_CURSOR_SHIFT
;
2877 I915_WRITE(DSPFW3
, reg
);
2878 DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg
);
2881 reg
= I915_READ(DSPFW3
);
2882 reg
|= PINEVIEW_SELF_REFRESH_EN
;
2883 I915_WRITE(DSPFW3
, reg
);
2884 DRM_DEBUG_KMS("Self-refresh is enabled\n");
2886 pineview_disable_cxsr(dev
);
2887 DRM_DEBUG_KMS("Self-refresh is disabled\n");
2891 static void g4x_update_wm(struct drm_device
*dev
, int planea_clock
,
2892 int planeb_clock
, int sr_hdisplay
, int sr_htotal
,
2895 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2896 int total_size
, cacheline_size
;
2897 int planea_wm
, planeb_wm
, cursora_wm
, cursorb_wm
, cursor_sr
;
2898 struct intel_watermark_params planea_params
, planeb_params
;
2899 unsigned long line_time_us
;
2900 int sr_clock
, sr_entries
= 0, entries_required
;
2902 /* Create copies of the base settings for each pipe */
2903 planea_params
= planeb_params
= g4x_wm_info
;
2905 /* Grab a couple of global values before we overwrite them */
2906 total_size
= planea_params
.fifo_size
;
2907 cacheline_size
= planea_params
.cacheline_size
;
2910 * Note: we need to make sure we don't overflow for various clock &
2912 * clocks go from a few thousand to several hundred thousand.
2913 * latency is usually a few thousand
2915 entries_required
= ((planea_clock
/ 1000) * pixel_size
* latency_ns
) /
2917 entries_required
/= G4X_FIFO_LINE_SIZE
;
2918 planea_wm
= entries_required
+ planea_params
.guard_size
;
2920 entries_required
= ((planeb_clock
/ 1000) * pixel_size
* latency_ns
) /
2922 entries_required
/= G4X_FIFO_LINE_SIZE
;
2923 planeb_wm
= entries_required
+ planeb_params
.guard_size
;
2925 cursora_wm
= cursorb_wm
= 16;
2928 DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm
, planeb_wm
);
2930 /* Calc sr entries for one plane configs */
2931 if (sr_hdisplay
&& (!planea_clock
|| !planeb_clock
)) {
2932 /* self-refresh has much higher latency */
2933 static const int sr_latency_ns
= 12000;
2935 sr_clock
= planea_clock
? planea_clock
: planeb_clock
;
2936 line_time_us
= ((sr_htotal
* 1000) / sr_clock
);
2938 /* Use ns/us then divide to preserve precision */
2939 sr_entries
= (((sr_latency_ns
/ line_time_us
) + 1000) / 1000) *
2940 pixel_size
* sr_hdisplay
;
2941 sr_entries
= roundup(sr_entries
/ cacheline_size
, 1);
2943 entries_required
= (((sr_latency_ns
/ line_time_us
) +
2944 1000) / 1000) * pixel_size
* 64;
2945 entries_required
= roundup(entries_required
/
2946 g4x_cursor_wm_info
.cacheline_size
, 1);
2947 cursor_sr
= entries_required
+ g4x_cursor_wm_info
.guard_size
;
2949 if (cursor_sr
> g4x_cursor_wm_info
.max_wm
)
2950 cursor_sr
= g4x_cursor_wm_info
.max_wm
;
2951 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
2952 "cursor %d\n", sr_entries
, cursor_sr
);
2954 I915_WRITE(FW_BLC_SELF
, FW_BLC_SELF_EN
);
2956 /* Turn off self refresh if both pipes are enabled */
2957 I915_WRITE(FW_BLC_SELF
, I915_READ(FW_BLC_SELF
)
2961 DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
2962 planea_wm
, planeb_wm
, sr_entries
);
2967 I915_WRITE(DSPFW1
, (sr_entries
<< DSPFW_SR_SHIFT
) |
2968 (cursorb_wm
<< DSPFW_CURSORB_SHIFT
) |
2969 (planeb_wm
<< DSPFW_PLANEB_SHIFT
) | planea_wm
);
2970 I915_WRITE(DSPFW2
, (I915_READ(DSPFW2
) & DSPFW_CURSORA_MASK
) |
2971 (cursora_wm
<< DSPFW_CURSORA_SHIFT
));
2972 /* HPLL off in SR has some issues on G4x... disable it */
2973 I915_WRITE(DSPFW3
, (I915_READ(DSPFW3
) & ~DSPFW_HPLL_SR_EN
) |
2974 (cursor_sr
<< DSPFW_CURSOR_SR_SHIFT
));
2977 static void i965_update_wm(struct drm_device
*dev
, int planea_clock
,
2978 int planeb_clock
, int sr_hdisplay
, int sr_htotal
,
2981 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2982 unsigned long line_time_us
;
2983 int sr_clock
, sr_entries
, srwm
= 1;
2986 /* Calc sr entries for one plane configs */
2987 if (sr_hdisplay
&& (!planea_clock
|| !planeb_clock
)) {
2988 /* self-refresh has much higher latency */
2989 static const int sr_latency_ns
= 12000;
2991 sr_clock
= planea_clock
? planea_clock
: planeb_clock
;
2992 line_time_us
= ((sr_htotal
* 1000) / sr_clock
);
2994 /* Use ns/us then divide to preserve precision */
2995 sr_entries
= (((sr_latency_ns
/ line_time_us
) + 1000) / 1000) *
2996 pixel_size
* sr_hdisplay
;
2997 sr_entries
= roundup(sr_entries
/ I915_FIFO_LINE_SIZE
, 1);
2998 DRM_DEBUG("self-refresh entries: %d\n", sr_entries
);
2999 srwm
= I965_FIFO_SIZE
- sr_entries
;
3004 sr_entries
= (((sr_latency_ns
/ line_time_us
) + 1000) / 1000) *
3006 sr_entries
= roundup(sr_entries
/
3007 i965_cursor_wm_info
.cacheline_size
, 1);
3008 cursor_sr
= i965_cursor_wm_info
.fifo_size
-
3009 (sr_entries
+ i965_cursor_wm_info
.guard_size
);
3011 if (cursor_sr
> i965_cursor_wm_info
.max_wm
)
3012 cursor_sr
= i965_cursor_wm_info
.max_wm
;
3014 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3015 "cursor %d\n", srwm
, cursor_sr
);
3018 I915_WRITE(FW_BLC_SELF
, FW_BLC_SELF_EN
);
3020 /* Turn off self refresh if both pipes are enabled */
3022 I915_WRITE(FW_BLC_SELF
, I915_READ(FW_BLC_SELF
)
3026 DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
3029 /* 965 has limitations... */
3030 I915_WRITE(DSPFW1
, (srwm
<< DSPFW_SR_SHIFT
) | (8 << 16) | (8 << 8) |
3032 I915_WRITE(DSPFW2
, (8 << 8) | (8 << 0));
3033 /* update cursor SR watermark */
3034 I915_WRITE(DSPFW3
, (cursor_sr
<< DSPFW_CURSOR_SR_SHIFT
));
3037 static void i9xx_update_wm(struct drm_device
*dev
, int planea_clock
,
3038 int planeb_clock
, int sr_hdisplay
, int sr_htotal
,
3041 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3044 int total_size
, cacheline_size
, cwm
, srwm
= 1;
3045 int planea_wm
, planeb_wm
;
3046 struct intel_watermark_params planea_params
, planeb_params
;
3047 unsigned long line_time_us
;
3048 int sr_clock
, sr_entries
= 0;
3050 /* Create copies of the base settings for each pipe */
3051 if (IS_I965GM(dev
) || IS_I945GM(dev
))
3052 planea_params
= planeb_params
= i945_wm_info
;
3053 else if (IS_I9XX(dev
))
3054 planea_params
= planeb_params
= i915_wm_info
;
3056 planea_params
= planeb_params
= i855_wm_info
;
3058 /* Grab a couple of global values before we overwrite them */
3059 total_size
= planea_params
.fifo_size
;
3060 cacheline_size
= planea_params
.cacheline_size
;
3062 /* Update per-plane FIFO sizes */
3063 planea_params
.fifo_size
= dev_priv
->display
.get_fifo_size(dev
, 0);
3064 planeb_params
.fifo_size
= dev_priv
->display
.get_fifo_size(dev
, 1);
3066 planea_wm
= intel_calculate_wm(planea_clock
, &planea_params
,
3067 pixel_size
, latency_ns
);
3068 planeb_wm
= intel_calculate_wm(planeb_clock
, &planeb_params
,
3069 pixel_size
, latency_ns
);
3070 DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm
, planeb_wm
);
3073 * Overlay gets an aggressive default since video jitter is bad.
3077 /* Calc sr entries for one plane configs */
3078 if (HAS_FW_BLC(dev
) && sr_hdisplay
&&
3079 (!planea_clock
|| !planeb_clock
)) {
3080 /* self-refresh has much higher latency */
3081 static const int sr_latency_ns
= 6000;
3083 sr_clock
= planea_clock
? planea_clock
: planeb_clock
;
3084 line_time_us
= ((sr_htotal
* 1000) / sr_clock
);
3086 /* Use ns/us then divide to preserve precision */
3087 sr_entries
= (((sr_latency_ns
/ line_time_us
) + 1000) / 1000) *
3088 pixel_size
* sr_hdisplay
;
3089 sr_entries
= roundup(sr_entries
/ cacheline_size
, 1);
3090 DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries
);
3091 srwm
= total_size
- sr_entries
;
3095 if (IS_I945G(dev
) || IS_I945GM(dev
))
3096 I915_WRITE(FW_BLC_SELF
, FW_BLC_SELF_FIFO_MASK
| (srwm
& 0xff));
3097 else if (IS_I915GM(dev
)) {
3098 /* 915M has a smaller SRWM field */
3099 I915_WRITE(FW_BLC_SELF
, srwm
& 0x3f);
3100 I915_WRITE(INSTPM
, I915_READ(INSTPM
) | INSTPM_SELF_EN
);
3103 /* Turn off self refresh if both pipes are enabled */
3104 if (IS_I945G(dev
) || IS_I945GM(dev
)) {
3105 I915_WRITE(FW_BLC_SELF
, I915_READ(FW_BLC_SELF
)
3107 } else if (IS_I915GM(dev
)) {
3108 I915_WRITE(INSTPM
, I915_READ(INSTPM
) & ~INSTPM_SELF_EN
);
3112 DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
3113 planea_wm
, planeb_wm
, cwm
, srwm
);
3115 fwater_lo
= ((planeb_wm
& 0x3f) << 16) | (planea_wm
& 0x3f);
3116 fwater_hi
= (cwm
& 0x1f);
3118 /* Set request length to 8 cachelines per fetch */
3119 fwater_lo
= fwater_lo
| (1 << 24) | (1 << 8);
3120 fwater_hi
= fwater_hi
| (1 << 8);
3122 I915_WRITE(FW_BLC
, fwater_lo
);
3123 I915_WRITE(FW_BLC2
, fwater_hi
);
3126 static void i830_update_wm(struct drm_device
*dev
, int planea_clock
, int unused
,
3127 int unused2
, int unused3
, int pixel_size
)
3129 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3130 uint32_t fwater_lo
= I915_READ(FW_BLC
) & ~0xfff;
3133 i830_wm_info
.fifo_size
= dev_priv
->display
.get_fifo_size(dev
, 0);
3135 planea_wm
= intel_calculate_wm(planea_clock
, &i830_wm_info
,
3136 pixel_size
, latency_ns
);
3137 fwater_lo
|= (3<<8) | planea_wm
;
3139 DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm
);
3141 I915_WRITE(FW_BLC
, fwater_lo
);
3144 #define ILK_LP0_PLANE_LATENCY 700
3146 static void ironlake_update_wm(struct drm_device
*dev
, int planea_clock
,
3147 int planeb_clock
, int sr_hdisplay
, int sr_htotal
,
3150 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3151 int planea_wm
, planeb_wm
, cursora_wm
, cursorb_wm
;
3152 int sr_wm
, cursor_wm
;
3153 unsigned long line_time_us
;
3154 int sr_clock
, entries_required
;
3157 /* Calculate and update the watermark for plane A */
3159 entries_required
= ((planea_clock
/ 1000) * pixel_size
*
3160 ILK_LP0_PLANE_LATENCY
) / 1000;
3161 entries_required
= DIV_ROUND_UP(entries_required
,
3162 ironlake_display_wm_info
.cacheline_size
);
3163 planea_wm
= entries_required
+
3164 ironlake_display_wm_info
.guard_size
;
3166 if (planea_wm
> (int)ironlake_display_wm_info
.max_wm
)
3167 planea_wm
= ironlake_display_wm_info
.max_wm
;
3170 reg_value
= I915_READ(WM0_PIPEA_ILK
);
3171 reg_value
&= ~(WM0_PIPE_PLANE_MASK
| WM0_PIPE_CURSOR_MASK
);
3172 reg_value
|= (planea_wm
<< WM0_PIPE_PLANE_SHIFT
) |
3173 (cursora_wm
& WM0_PIPE_CURSOR_MASK
);
3174 I915_WRITE(WM0_PIPEA_ILK
, reg_value
);
3175 DRM_DEBUG_KMS("FIFO watermarks For pipe A - plane %d, "
3176 "cursor: %d\n", planea_wm
, cursora_wm
);
3178 /* Calculate and update the watermark for plane B */
3180 entries_required
= ((planeb_clock
/ 1000) * pixel_size
*
3181 ILK_LP0_PLANE_LATENCY
) / 1000;
3182 entries_required
= DIV_ROUND_UP(entries_required
,
3183 ironlake_display_wm_info
.cacheline_size
);
3184 planeb_wm
= entries_required
+
3185 ironlake_display_wm_info
.guard_size
;
3187 if (planeb_wm
> (int)ironlake_display_wm_info
.max_wm
)
3188 planeb_wm
= ironlake_display_wm_info
.max_wm
;
3191 reg_value
= I915_READ(WM0_PIPEB_ILK
);
3192 reg_value
&= ~(WM0_PIPE_PLANE_MASK
| WM0_PIPE_CURSOR_MASK
);
3193 reg_value
|= (planeb_wm
<< WM0_PIPE_PLANE_SHIFT
) |
3194 (cursorb_wm
& WM0_PIPE_CURSOR_MASK
);
3195 I915_WRITE(WM0_PIPEB_ILK
, reg_value
);
3196 DRM_DEBUG_KMS("FIFO watermarks For pipe B - plane %d, "
3197 "cursor: %d\n", planeb_wm
, cursorb_wm
);
3201 * Calculate and update the self-refresh watermark only when one
3202 * display plane is used.
3204 if (!planea_clock
|| !planeb_clock
) {
3206 /* Read the self-refresh latency. The unit is 0.5us */
3207 int ilk_sr_latency
= I915_READ(MLTR_ILK
) & ILK_SRLT_MASK
;
3209 sr_clock
= planea_clock
? planea_clock
: planeb_clock
;
3210 line_time_us
= ((sr_htotal
* 1000) / sr_clock
);
3212 /* Use ns/us then divide to preserve precision */
3213 line_count
= ((ilk_sr_latency
* 500) / line_time_us
+ 1000)
3216 /* calculate the self-refresh watermark for display plane */
3217 entries_required
= line_count
* sr_hdisplay
* pixel_size
;
3218 entries_required
= DIV_ROUND_UP(entries_required
,
3219 ironlake_display_srwm_info
.cacheline_size
);
3220 sr_wm
= entries_required
+
3221 ironlake_display_srwm_info
.guard_size
;
3223 /* calculate the self-refresh watermark for display cursor */
3224 entries_required
= line_count
* pixel_size
* 64;
3225 entries_required
= DIV_ROUND_UP(entries_required
,
3226 ironlake_cursor_srwm_info
.cacheline_size
);
3227 cursor_wm
= entries_required
+
3228 ironlake_cursor_srwm_info
.guard_size
;
3230 /* configure watermark and enable self-refresh */
3231 reg_value
= I915_READ(WM1_LP_ILK
);
3232 reg_value
&= ~(WM1_LP_LATENCY_MASK
| WM1_LP_SR_MASK
|
3233 WM1_LP_CURSOR_MASK
);
3234 reg_value
|= WM1_LP_SR_EN
|
3235 (ilk_sr_latency
<< WM1_LP_LATENCY_SHIFT
) |
3236 (sr_wm
<< WM1_LP_SR_SHIFT
) | cursor_wm
;
3238 I915_WRITE(WM1_LP_ILK
, reg_value
);
3239 DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
3240 "cursor %d\n", sr_wm
, cursor_wm
);
3243 /* Turn off self refresh if both pipes are enabled */
3244 I915_WRITE(WM1_LP_ILK
, I915_READ(WM1_LP_ILK
) & ~WM1_LP_SR_EN
);
3248 * intel_update_watermarks - update FIFO watermark values based on current modes
3250 * Calculate watermark values for the various WM regs based on current mode
3251 * and plane configuration.
3253 * There are several cases to deal with here:
3254 * - normal (i.e. non-self-refresh)
3255 * - self-refresh (SR) mode
3256 * - lines are large relative to FIFO size (buffer can hold up to 2)
3257 * - lines are small relative to FIFO size (buffer can hold more than 2
3258 * lines), so need to account for TLB latency
3260 * The normal calculation is:
3261 * watermark = dotclock * bytes per pixel * latency
3262 * where latency is platform & configuration dependent (we assume pessimal
3265 * The SR calculation is:
3266 * watermark = (trunc(latency/line time)+1) * surface width *
3269 * line time = htotal / dotclock
3270 * surface width = hdisplay for normal plane and 64 for cursor
3271 * and latency is assumed to be high, as above.
3273 * The final value programmed to the register should always be rounded up,
3274 * and include an extra 2 entries to account for clock crossings.
3276 * We don't use the sprite, so we can ignore that. And on Crestline we have
3277 * to set the non-SR watermarks to 8.
3279 static void intel_update_watermarks(struct drm_device
*dev
)
3281 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3282 struct drm_crtc
*crtc
;
3283 struct intel_crtc
*intel_crtc
;
3284 int sr_hdisplay
= 0;
3285 unsigned long planea_clock
= 0, planeb_clock
= 0, sr_clock
= 0;
3286 int enabled
= 0, pixel_size
= 0;
3289 if (!dev_priv
->display
.update_wm
)
3292 /* Get the clock config from both planes */
3293 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
3294 intel_crtc
= to_intel_crtc(crtc
);
3295 if (crtc
->enabled
) {
3297 if (intel_crtc
->plane
== 0) {
3298 DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n",
3299 intel_crtc
->pipe
, crtc
->mode
.clock
);
3300 planea_clock
= crtc
->mode
.clock
;
3302 DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n",
3303 intel_crtc
->pipe
, crtc
->mode
.clock
);
3304 planeb_clock
= crtc
->mode
.clock
;
3306 sr_hdisplay
= crtc
->mode
.hdisplay
;
3307 sr_clock
= crtc
->mode
.clock
;
3308 sr_htotal
= crtc
->mode
.htotal
;
3310 pixel_size
= crtc
->fb
->bits_per_pixel
/ 8;
3312 pixel_size
= 4; /* by default */
3319 dev_priv
->display
.update_wm(dev
, planea_clock
, planeb_clock
,
3320 sr_hdisplay
, sr_htotal
, pixel_size
);
3323 static int intel_crtc_mode_set(struct drm_crtc
*crtc
,
3324 struct drm_display_mode
*mode
,
3325 struct drm_display_mode
*adjusted_mode
,
3327 struct drm_framebuffer
*old_fb
)
3329 struct drm_device
*dev
= crtc
->dev
;
3330 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3331 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
3332 int pipe
= intel_crtc
->pipe
;
3333 int plane
= intel_crtc
->plane
;
3334 int fp_reg
= (pipe
== 0) ? FPA0
: FPB0
;
3335 int dpll_reg
= (pipe
== 0) ? DPLL_A
: DPLL_B
;
3336 int dpll_md_reg
= (intel_crtc
->pipe
== 0) ? DPLL_A_MD
: DPLL_B_MD
;
3337 int dspcntr_reg
= (plane
== 0) ? DSPACNTR
: DSPBCNTR
;
3338 int pipeconf_reg
= (pipe
== 0) ? PIPEACONF
: PIPEBCONF
;
3339 int htot_reg
= (pipe
== 0) ? HTOTAL_A
: HTOTAL_B
;
3340 int hblank_reg
= (pipe
== 0) ? HBLANK_A
: HBLANK_B
;
3341 int hsync_reg
= (pipe
== 0) ? HSYNC_A
: HSYNC_B
;
3342 int vtot_reg
= (pipe
== 0) ? VTOTAL_A
: VTOTAL_B
;
3343 int vblank_reg
= (pipe
== 0) ? VBLANK_A
: VBLANK_B
;
3344 int vsync_reg
= (pipe
== 0) ? VSYNC_A
: VSYNC_B
;
3345 int dspsize_reg
= (plane
== 0) ? DSPASIZE
: DSPBSIZE
;
3346 int dsppos_reg
= (plane
== 0) ? DSPAPOS
: DSPBPOS
;
3347 int pipesrc_reg
= (pipe
== 0) ? PIPEASRC
: PIPEBSRC
;
3348 int refclk
, num_connectors
= 0;
3349 intel_clock_t clock
, reduced_clock
;
3350 u32 dpll
= 0, fp
= 0, fp2
= 0, dspcntr
, pipeconf
;
3351 bool ok
, has_reduced_clock
= false, is_sdvo
= false, is_dvo
= false;
3352 bool is_crt
= false, is_lvds
= false, is_tv
= false, is_dp
= false;
3353 bool is_edp
= false;
3354 struct drm_mode_config
*mode_config
= &dev
->mode_config
;
3355 struct drm_encoder
*encoder
;
3356 struct intel_encoder
*intel_encoder
= NULL
;
3357 const intel_limit_t
*limit
;
3359 struct fdi_m_n m_n
= {0};
3360 int data_m1_reg
= (pipe
== 0) ? PIPEA_DATA_M1
: PIPEB_DATA_M1
;
3361 int data_n1_reg
= (pipe
== 0) ? PIPEA_DATA_N1
: PIPEB_DATA_N1
;
3362 int link_m1_reg
= (pipe
== 0) ? PIPEA_LINK_M1
: PIPEB_LINK_M1
;
3363 int link_n1_reg
= (pipe
== 0) ? PIPEA_LINK_N1
: PIPEB_LINK_N1
;
3364 int pch_fp_reg
= (pipe
== 0) ? PCH_FPA0
: PCH_FPB0
;
3365 int pch_dpll_reg
= (pipe
== 0) ? PCH_DPLL_A
: PCH_DPLL_B
;
3366 int fdi_rx_reg
= (pipe
== 0) ? FDI_RXA_CTL
: FDI_RXB_CTL
;
3367 int fdi_tx_reg
= (pipe
== 0) ? FDI_TXA_CTL
: FDI_TXB_CTL
;
3368 int trans_dpll_sel
= (pipe
== 0) ? 0 : 1;
3369 int lvds_reg
= LVDS
;
3371 int sdvo_pixel_multiply
;
3374 drm_vblank_pre_modeset(dev
, pipe
);
3376 list_for_each_entry(encoder
, &mode_config
->encoder_list
, head
) {
3378 if (!encoder
|| encoder
->crtc
!= crtc
)
3381 intel_encoder
= enc_to_intel_encoder(encoder
);
3383 switch (intel_encoder
->type
) {
3384 case INTEL_OUTPUT_LVDS
:
3387 case INTEL_OUTPUT_SDVO
:
3388 case INTEL_OUTPUT_HDMI
:
3390 if (intel_encoder
->needs_tv_clock
)
3393 case INTEL_OUTPUT_DVO
:
3396 case INTEL_OUTPUT_TVOUT
:
3399 case INTEL_OUTPUT_ANALOG
:
3402 case INTEL_OUTPUT_DISPLAYPORT
:
3405 case INTEL_OUTPUT_EDP
:
3413 if (is_lvds
&& dev_priv
->lvds_use_ssc
&& num_connectors
< 2) {
3414 refclk
= dev_priv
->lvds_ssc_freq
* 1000;
3415 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
3417 } else if (IS_I9XX(dev
)) {
3419 if (HAS_PCH_SPLIT(dev
))
3420 refclk
= 120000; /* 120Mhz refclk */
3427 * Returns a set of divisors for the desired target clock with the given
3428 * refclk, or FALSE. The returned values represent the clock equation:
3429 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
3431 limit
= intel_limit(crtc
);
3432 ok
= limit
->find_pll(limit
, crtc
, adjusted_mode
->clock
, refclk
, &clock
);
3434 DRM_ERROR("Couldn't find PLL settings for mode!\n");
3435 drm_vblank_post_modeset(dev
, pipe
);
3439 if (is_lvds
&& dev_priv
->lvds_downclock_avail
) {
3440 has_reduced_clock
= limit
->find_pll(limit
, crtc
,
3441 dev_priv
->lvds_downclock
,
3444 if (has_reduced_clock
&& (clock
.p
!= reduced_clock
.p
)) {
3446 * If the different P is found, it means that we can't
3447 * switch the display clock by using the FP0/FP1.
3448 * In such case we will disable the LVDS downclock
3451 DRM_DEBUG_KMS("Different P is found for "
3452 "LVDS clock/downclock\n");
3453 has_reduced_clock
= 0;
3456 /* SDVO TV has fixed PLL values depend on its clock range,
3457 this mirrors vbios setting. */
3458 if (is_sdvo
&& is_tv
) {
3459 if (adjusted_mode
->clock
>= 100000
3460 && adjusted_mode
->clock
< 140500) {
3466 } else if (adjusted_mode
->clock
>= 140500
3467 && adjusted_mode
->clock
<= 200000) {
3477 if (HAS_PCH_SPLIT(dev
)) {
3478 int lane
= 0, link_bw
, bpp
;
3479 /* eDP doesn't require FDI link, so just set DP M/N
3480 according to current link config */
3482 target_clock
= mode
->clock
;
3483 intel_edp_link_config(intel_encoder
,
3486 /* DP over FDI requires target mode clock
3487 instead of link clock */
3489 target_clock
= mode
->clock
;
3491 target_clock
= adjusted_mode
->clock
;
3495 /* determine panel color depth */
3496 temp
= I915_READ(pipeconf_reg
);
3497 temp
&= ~PIPE_BPC_MASK
;
3499 int lvds_reg
= I915_READ(PCH_LVDS
);
3500 /* the BPC will be 6 if it is 18-bit LVDS panel */
3501 if ((lvds_reg
& LVDS_A3_POWER_MASK
) == LVDS_A3_POWER_UP
)
3505 } else if (is_edp
|| (is_dp
&& intel_pch_has_edp(crtc
))) {
3506 switch (dev_priv
->edp_bpp
/3) {
3522 I915_WRITE(pipeconf_reg
, temp
);
3523 I915_READ(pipeconf_reg
);
3525 switch (temp
& PIPE_BPC_MASK
) {
3539 DRM_ERROR("unknown pipe bpc value\n");
3545 * Account for spread spectrum to avoid
3546 * oversubscribing the link. Max center spread
3547 * is 2.5%; use 5% for safety's sake.
3549 u32 bps
= target_clock
* bpp
* 21 / 20;
3550 lane
= bps
/ (link_bw
* 8) + 1;
3553 intel_crtc
->fdi_lanes
= lane
;
3555 ironlake_compute_m_n(bpp
, lane
, target_clock
, link_bw
, &m_n
);
3558 /* Ironlake: try to setup display ref clock before DPLL
3559 * enabling. This is only under driver's control after
3560 * PCH B stepping, previous chipset stepping should be
3561 * ignoring this setting.
3563 if (HAS_PCH_SPLIT(dev
)) {
3564 temp
= I915_READ(PCH_DREF_CONTROL
);
3565 /* Always enable nonspread source */
3566 temp
&= ~DREF_NONSPREAD_SOURCE_MASK
;
3567 temp
|= DREF_NONSPREAD_SOURCE_ENABLE
;
3568 I915_WRITE(PCH_DREF_CONTROL
, temp
);
3569 POSTING_READ(PCH_DREF_CONTROL
);
3571 temp
&= ~DREF_SSC_SOURCE_MASK
;
3572 temp
|= DREF_SSC_SOURCE_ENABLE
;
3573 I915_WRITE(PCH_DREF_CONTROL
, temp
);
3574 POSTING_READ(PCH_DREF_CONTROL
);
3579 if (dev_priv
->lvds_use_ssc
) {
3580 temp
|= DREF_SSC1_ENABLE
;
3581 I915_WRITE(PCH_DREF_CONTROL
, temp
);
3582 POSTING_READ(PCH_DREF_CONTROL
);
3586 temp
&= ~DREF_CPU_SOURCE_OUTPUT_MASK
;
3587 temp
|= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD
;
3588 I915_WRITE(PCH_DREF_CONTROL
, temp
);
3589 POSTING_READ(PCH_DREF_CONTROL
);
3591 temp
|= DREF_CPU_SOURCE_OUTPUT_NONSPREAD
;
3592 I915_WRITE(PCH_DREF_CONTROL
, temp
);
3593 POSTING_READ(PCH_DREF_CONTROL
);
3598 if (IS_PINEVIEW(dev
)) {
3599 fp
= (1 << clock
.n
) << 16 | clock
.m1
<< 8 | clock
.m2
;
3600 if (has_reduced_clock
)
3601 fp2
= (1 << reduced_clock
.n
) << 16 |
3602 reduced_clock
.m1
<< 8 | reduced_clock
.m2
;
3604 fp
= clock
.n
<< 16 | clock
.m1
<< 8 | clock
.m2
;
3605 if (has_reduced_clock
)
3606 fp2
= reduced_clock
.n
<< 16 | reduced_clock
.m1
<< 8 |
3610 if (!HAS_PCH_SPLIT(dev
))
3611 dpll
= DPLL_VGA_MODE_DIS
;
3615 dpll
|= DPLLB_MODE_LVDS
;
3617 dpll
|= DPLLB_MODE_DAC_SERIAL
;
3619 dpll
|= DPLL_DVO_HIGH_SPEED
;
3620 sdvo_pixel_multiply
= adjusted_mode
->clock
/ mode
->clock
;
3621 if (IS_I945G(dev
) || IS_I945GM(dev
) || IS_G33(dev
))
3622 dpll
|= (sdvo_pixel_multiply
- 1) << SDVO_MULTIPLIER_SHIFT_HIRES
;
3623 else if (HAS_PCH_SPLIT(dev
))
3624 dpll
|= (sdvo_pixel_multiply
- 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT
;
3627 dpll
|= DPLL_DVO_HIGH_SPEED
;
3629 /* compute bitmask from p1 value */
3630 if (IS_PINEVIEW(dev
))
3631 dpll
|= (1 << (clock
.p1
- 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW
;
3633 dpll
|= (1 << (clock
.p1
- 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT
;
3635 if (HAS_PCH_SPLIT(dev
))
3636 dpll
|= (1 << (clock
.p1
- 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT
;
3637 if (IS_G4X(dev
) && has_reduced_clock
)
3638 dpll
|= (1 << (reduced_clock
.p1
- 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT
;
3642 dpll
|= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5
;
3645 dpll
|= DPLLB_LVDS_P2_CLOCK_DIV_7
;
3648 dpll
|= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10
;
3651 dpll
|= DPLLB_LVDS_P2_CLOCK_DIV_14
;
3654 if (IS_I965G(dev
) && !HAS_PCH_SPLIT(dev
))
3655 dpll
|= (6 << PLL_LOAD_PULSE_PHASE_SHIFT
);
3658 dpll
|= (1 << (clock
.p1
- 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT
;
3661 dpll
|= PLL_P1_DIVIDE_BY_TWO
;
3663 dpll
|= (clock
.p1
- 2) << DPLL_FPA01_P1_POST_DIV_SHIFT
;
3665 dpll
|= PLL_P2_DIVIDE_BY_4
;
3669 if (is_sdvo
&& is_tv
)
3670 dpll
|= PLL_REF_INPUT_TVCLKINBC
;
3672 /* XXX: just matching BIOS for now */
3673 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
3675 else if (is_lvds
&& dev_priv
->lvds_use_ssc
&& num_connectors
< 2)
3676 dpll
|= PLLB_REF_INPUT_SPREADSPECTRUMIN
;
3678 dpll
|= PLL_REF_INPUT_DREFCLK
;
3680 /* setup pipeconf */
3681 pipeconf
= I915_READ(pipeconf_reg
);
3683 /* Set up the display plane register */
3684 dspcntr
= DISPPLANE_GAMMA_ENABLE
;
3686 /* Ironlake's plane is forced to pipe, bit 24 is to
3687 enable color space conversion */
3688 if (!HAS_PCH_SPLIT(dev
)) {
3690 dspcntr
&= ~DISPPLANE_SEL_PIPE_MASK
;
3692 dspcntr
|= DISPPLANE_SEL_PIPE_B
;
3695 if (pipe
== 0 && !IS_I965G(dev
)) {
3696 /* Enable pixel doubling when the dot clock is > 90% of the (display)
3699 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
3703 dev_priv
->display
.get_display_clock_speed(dev
) * 9 / 10)
3704 pipeconf
|= PIPEACONF_DOUBLE_WIDE
;
3706 pipeconf
&= ~PIPEACONF_DOUBLE_WIDE
;
3709 dspcntr
|= DISPLAY_PLANE_ENABLE
;
3710 pipeconf
|= PIPEACONF_ENABLE
;
3711 dpll
|= DPLL_VCO_ENABLE
;
3714 /* Disable the panel fitter if it was on our pipe */
3715 if (!HAS_PCH_SPLIT(dev
) && intel_panel_fitter_pipe(dev
) == pipe
)
3716 I915_WRITE(PFIT_CONTROL
, 0);
3718 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe
== 0 ? 'A' : 'B');
3719 drm_mode_debug_printmodeline(mode
);
3721 /* assign to Ironlake registers */
3722 if (HAS_PCH_SPLIT(dev
)) {
3723 fp_reg
= pch_fp_reg
;
3724 dpll_reg
= pch_dpll_reg
;
3728 ironlake_disable_pll_edp(crtc
);
3729 } else if ((dpll
& DPLL_VCO_ENABLE
)) {
3730 I915_WRITE(fp_reg
, fp
);
3731 I915_WRITE(dpll_reg
, dpll
& ~DPLL_VCO_ENABLE
);
3732 I915_READ(dpll_reg
);
3736 /* enable transcoder DPLL */
3737 if (HAS_PCH_CPT(dev
)) {
3738 temp
= I915_READ(PCH_DPLL_SEL
);
3739 if (trans_dpll_sel
== 0)
3740 temp
|= (TRANSA_DPLL_ENABLE
| TRANSA_DPLLA_SEL
);
3742 temp
|= (TRANSB_DPLL_ENABLE
| TRANSB_DPLLB_SEL
);
3743 I915_WRITE(PCH_DPLL_SEL
, temp
);
3744 I915_READ(PCH_DPLL_SEL
);
3748 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
3749 * This is an exception to the general rule that mode_set doesn't turn
3755 if (HAS_PCH_SPLIT(dev
))
3756 lvds_reg
= PCH_LVDS
;
3758 lvds
= I915_READ(lvds_reg
);
3759 lvds
|= LVDS_PORT_EN
| LVDS_A0A2_CLKA_POWER_UP
;
3761 if (HAS_PCH_CPT(dev
))
3762 lvds
|= PORT_TRANS_B_SEL_CPT
;
3764 lvds
|= LVDS_PIPEB_SELECT
;
3766 if (HAS_PCH_CPT(dev
))
3767 lvds
&= ~PORT_TRANS_SEL_MASK
;
3769 lvds
&= ~LVDS_PIPEB_SELECT
;
3771 /* set the corresponsding LVDS_BORDER bit */
3772 lvds
|= dev_priv
->lvds_border_bits
;
3773 /* Set the B0-B3 data pairs corresponding to whether we're going to
3774 * set the DPLLs for dual-channel mode or not.
3777 lvds
|= LVDS_B0B3_POWER_UP
| LVDS_CLKB_POWER_UP
;
3779 lvds
&= ~(LVDS_B0B3_POWER_UP
| LVDS_CLKB_POWER_UP
);
3781 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
3782 * appropriately here, but we need to look more thoroughly into how
3783 * panels behave in the two modes.
3785 /* set the dithering flag */
3786 if (IS_I965G(dev
)) {
3787 if (dev_priv
->lvds_dither
) {
3788 if (HAS_PCH_SPLIT(dev
)) {
3789 pipeconf
|= PIPE_ENABLE_DITHER
;
3790 pipeconf
|= PIPE_DITHER_TYPE_ST01
;
3792 lvds
|= LVDS_ENABLE_DITHER
;
3794 if (HAS_PCH_SPLIT(dev
)) {
3795 pipeconf
&= ~PIPE_ENABLE_DITHER
;
3796 pipeconf
&= ~PIPE_DITHER_TYPE_MASK
;
3798 lvds
&= ~LVDS_ENABLE_DITHER
;
3801 I915_WRITE(lvds_reg
, lvds
);
3802 I915_READ(lvds_reg
);
3805 intel_dp_set_m_n(crtc
, mode
, adjusted_mode
);
3806 else if (HAS_PCH_SPLIT(dev
)) {
3807 /* For non-DP output, clear any trans DP clock recovery setting.*/
3809 I915_WRITE(TRANSA_DATA_M1
, 0);
3810 I915_WRITE(TRANSA_DATA_N1
, 0);
3811 I915_WRITE(TRANSA_DP_LINK_M1
, 0);
3812 I915_WRITE(TRANSA_DP_LINK_N1
, 0);
3814 I915_WRITE(TRANSB_DATA_M1
, 0);
3815 I915_WRITE(TRANSB_DATA_N1
, 0);
3816 I915_WRITE(TRANSB_DP_LINK_M1
, 0);
3817 I915_WRITE(TRANSB_DP_LINK_N1
, 0);
3822 I915_WRITE(fp_reg
, fp
);
3823 I915_WRITE(dpll_reg
, dpll
);
3824 I915_READ(dpll_reg
);
3825 /* Wait for the clocks to stabilize. */
3828 if (IS_I965G(dev
) && !HAS_PCH_SPLIT(dev
)) {
3830 sdvo_pixel_multiply
= adjusted_mode
->clock
/ mode
->clock
;
3831 I915_WRITE(dpll_md_reg
, (0 << DPLL_MD_UDI_DIVIDER_SHIFT
) |
3832 ((sdvo_pixel_multiply
- 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT
));
3834 I915_WRITE(dpll_md_reg
, 0);
3836 /* write it again -- the BIOS does, after all */
3837 I915_WRITE(dpll_reg
, dpll
);
3839 I915_READ(dpll_reg
);
3840 /* Wait for the clocks to stabilize. */
3844 if (is_lvds
&& has_reduced_clock
&& i915_powersave
) {
3845 I915_WRITE(fp_reg
+ 4, fp2
);
3846 intel_crtc
->lowfreq_avail
= true;
3847 if (HAS_PIPE_CXSR(dev
)) {
3848 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
3849 pipeconf
|= PIPECONF_CXSR_DOWNCLOCK
;
3852 I915_WRITE(fp_reg
+ 4, fp
);
3853 intel_crtc
->lowfreq_avail
= false;
3854 if (HAS_PIPE_CXSR(dev
)) {
3855 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
3856 pipeconf
&= ~PIPECONF_CXSR_DOWNCLOCK
;
3860 if (adjusted_mode
->flags
& DRM_MODE_FLAG_INTERLACE
) {
3861 pipeconf
|= PIPECONF_INTERLACE_W_FIELD_INDICATION
;
3862 /* the chip adds 2 halflines automatically */
3863 adjusted_mode
->crtc_vdisplay
-= 1;
3864 adjusted_mode
->crtc_vtotal
-= 1;
3865 adjusted_mode
->crtc_vblank_start
-= 1;
3866 adjusted_mode
->crtc_vblank_end
-= 1;
3867 adjusted_mode
->crtc_vsync_end
-= 1;
3868 adjusted_mode
->crtc_vsync_start
-= 1;
3870 pipeconf
&= ~PIPECONF_INTERLACE_W_FIELD_INDICATION
; /* progressive */
3872 I915_WRITE(htot_reg
, (adjusted_mode
->crtc_hdisplay
- 1) |
3873 ((adjusted_mode
->crtc_htotal
- 1) << 16));
3874 I915_WRITE(hblank_reg
, (adjusted_mode
->crtc_hblank_start
- 1) |
3875 ((adjusted_mode
->crtc_hblank_end
- 1) << 16));
3876 I915_WRITE(hsync_reg
, (adjusted_mode
->crtc_hsync_start
- 1) |
3877 ((adjusted_mode
->crtc_hsync_end
- 1) << 16));
3878 I915_WRITE(vtot_reg
, (adjusted_mode
->crtc_vdisplay
- 1) |
3879 ((adjusted_mode
->crtc_vtotal
- 1) << 16));
3880 I915_WRITE(vblank_reg
, (adjusted_mode
->crtc_vblank_start
- 1) |
3881 ((adjusted_mode
->crtc_vblank_end
- 1) << 16));
3882 I915_WRITE(vsync_reg
, (adjusted_mode
->crtc_vsync_start
- 1) |
3883 ((adjusted_mode
->crtc_vsync_end
- 1) << 16));
3884 /* pipesrc and dspsize control the size that is scaled from, which should
3885 * always be the user's requested size.
3887 if (!HAS_PCH_SPLIT(dev
)) {
3888 I915_WRITE(dspsize_reg
, ((mode
->vdisplay
- 1) << 16) |
3889 (mode
->hdisplay
- 1));
3890 I915_WRITE(dsppos_reg
, 0);
3892 I915_WRITE(pipesrc_reg
, ((mode
->hdisplay
- 1) << 16) | (mode
->vdisplay
- 1));
3894 if (HAS_PCH_SPLIT(dev
)) {
3895 I915_WRITE(data_m1_reg
, TU_SIZE(m_n
.tu
) | m_n
.gmch_m
);
3896 I915_WRITE(data_n1_reg
, TU_SIZE(m_n
.tu
) | m_n
.gmch_n
);
3897 I915_WRITE(link_m1_reg
, m_n
.link_m
);
3898 I915_WRITE(link_n1_reg
, m_n
.link_n
);
3901 ironlake_set_pll_edp(crtc
, adjusted_mode
->clock
);
3903 /* enable FDI RX PLL too */
3904 temp
= I915_READ(fdi_rx_reg
);
3905 I915_WRITE(fdi_rx_reg
, temp
| FDI_RX_PLL_ENABLE
);
3906 I915_READ(fdi_rx_reg
);
3909 /* enable FDI TX PLL too */
3910 temp
= I915_READ(fdi_tx_reg
);
3911 I915_WRITE(fdi_tx_reg
, temp
| FDI_TX_PLL_ENABLE
);
3912 I915_READ(fdi_tx_reg
);
3914 /* enable FDI RX PCDCLK */
3915 temp
= I915_READ(fdi_rx_reg
);
3916 I915_WRITE(fdi_rx_reg
, temp
| FDI_SEL_PCDCLK
);
3917 I915_READ(fdi_rx_reg
);
3922 I915_WRITE(pipeconf_reg
, pipeconf
);
3923 I915_READ(pipeconf_reg
);
3925 intel_wait_for_vblank(dev
);
3927 if (IS_IRONLAKE(dev
)) {
3928 /* enable address swizzle for tiling buffer */
3929 temp
= I915_READ(DISP_ARB_CTL
);
3930 I915_WRITE(DISP_ARB_CTL
, temp
| DISP_TILE_SURFACE_SWIZZLING
);
3933 I915_WRITE(dspcntr_reg
, dspcntr
);
3935 /* Flush the plane changes */
3936 ret
= intel_pipe_set_base(crtc
, x
, y
, old_fb
);
3938 if ((IS_I965G(dev
) || plane
== 0))
3939 intel_update_fbc(crtc
, &crtc
->mode
);
3941 intel_update_watermarks(dev
);
3943 drm_vblank_post_modeset(dev
, pipe
);
3948 /** Loads the palette/gamma unit for the CRTC with the prepared values */
3949 void intel_crtc_load_lut(struct drm_crtc
*crtc
)
3951 struct drm_device
*dev
= crtc
->dev
;
3952 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3953 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
3954 int palreg
= (intel_crtc
->pipe
== 0) ? PALETTE_A
: PALETTE_B
;
3957 /* The clocks have to be on to load the palette. */
3961 /* use legacy palette for Ironlake */
3962 if (HAS_PCH_SPLIT(dev
))
3963 palreg
= (intel_crtc
->pipe
== 0) ? LGC_PALETTE_A
:
3966 for (i
= 0; i
< 256; i
++) {
3967 I915_WRITE(palreg
+ 4 * i
,
3968 (intel_crtc
->lut_r
[i
] << 16) |
3969 (intel_crtc
->lut_g
[i
] << 8) |
3970 intel_crtc
->lut_b
[i
]);
3974 static int intel_crtc_cursor_set(struct drm_crtc
*crtc
,
3975 struct drm_file
*file_priv
,
3977 uint32_t width
, uint32_t height
)
3979 struct drm_device
*dev
= crtc
->dev
;
3980 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3981 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
3982 struct drm_gem_object
*bo
;
3983 struct drm_i915_gem_object
*obj_priv
;
3984 int pipe
= intel_crtc
->pipe
;
3985 uint32_t control
= (pipe
== 0) ? CURACNTR
: CURBCNTR
;
3986 uint32_t base
= (pipe
== 0) ? CURABASE
: CURBBASE
;
3987 uint32_t temp
= I915_READ(control
);
3991 DRM_DEBUG_KMS("\n");
3993 /* if we want to turn off the cursor ignore width and height */
3995 DRM_DEBUG_KMS("cursor off\n");
3996 if (IS_MOBILE(dev
) || IS_I9XX(dev
)) {
3997 temp
&= ~(CURSOR_MODE
| MCURSOR_GAMMA_ENABLE
);
3998 temp
|= CURSOR_MODE_DISABLE
;
4000 temp
&= ~(CURSOR_ENABLE
| CURSOR_GAMMA_ENABLE
);
4004 mutex_lock(&dev
->struct_mutex
);
4008 /* Currently we only support 64x64 cursors */
4009 if (width
!= 64 || height
!= 64) {
4010 DRM_ERROR("we currently only support 64x64 cursors\n");
4014 bo
= drm_gem_object_lookup(dev
, file_priv
, handle
);
4018 obj_priv
= to_intel_bo(bo
);
4020 if (bo
->size
< width
* height
* 4) {
4021 DRM_ERROR("buffer is to small\n");
4026 /* we only need to pin inside GTT if cursor is non-phy */
4027 mutex_lock(&dev
->struct_mutex
);
4028 if (!dev_priv
->info
->cursor_needs_physical
) {
4029 ret
= i915_gem_object_pin(bo
, PAGE_SIZE
);
4031 DRM_ERROR("failed to pin cursor bo\n");
4035 ret
= i915_gem_object_set_to_gtt_domain(bo
, 0);
4037 DRM_ERROR("failed to move cursor bo into the GTT\n");
4041 addr
= obj_priv
->gtt_offset
;
4043 ret
= i915_gem_attach_phys_object(dev
, bo
, (pipe
== 0) ? I915_GEM_PHYS_CURSOR_0
: I915_GEM_PHYS_CURSOR_1
);
4045 DRM_ERROR("failed to attach phys object\n");
4048 addr
= obj_priv
->phys_obj
->handle
->busaddr
;
4052 I915_WRITE(CURSIZE
, (height
<< 12) | width
);
4054 /* Hooray for CUR*CNTR differences */
4055 if (IS_MOBILE(dev
) || IS_I9XX(dev
)) {
4056 temp
&= ~(CURSOR_MODE
| MCURSOR_PIPE_SELECT
);
4057 temp
|= CURSOR_MODE_64_ARGB_AX
| MCURSOR_GAMMA_ENABLE
;
4058 temp
|= (pipe
<< 28); /* Connect to correct pipe */
4060 temp
&= ~(CURSOR_FORMAT_MASK
);
4061 temp
|= CURSOR_ENABLE
;
4062 temp
|= CURSOR_FORMAT_ARGB
| CURSOR_GAMMA_ENABLE
;
4066 I915_WRITE(control
, temp
);
4067 I915_WRITE(base
, addr
);
4069 if (intel_crtc
->cursor_bo
) {
4070 if (dev_priv
->info
->cursor_needs_physical
) {
4071 if (intel_crtc
->cursor_bo
!= bo
)
4072 i915_gem_detach_phys_object(dev
, intel_crtc
->cursor_bo
);
4074 i915_gem_object_unpin(intel_crtc
->cursor_bo
);
4075 drm_gem_object_unreference(intel_crtc
->cursor_bo
);
4078 mutex_unlock(&dev
->struct_mutex
);
4080 intel_crtc
->cursor_addr
= addr
;
4081 intel_crtc
->cursor_bo
= bo
;
4085 i915_gem_object_unpin(bo
);
4087 mutex_unlock(&dev
->struct_mutex
);
4089 drm_gem_object_unreference_unlocked(bo
);
4093 static int intel_crtc_cursor_move(struct drm_crtc
*crtc
, int x
, int y
)
4095 struct drm_device
*dev
= crtc
->dev
;
4096 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4097 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4098 struct intel_framebuffer
*intel_fb
;
4099 int pipe
= intel_crtc
->pipe
;
4104 intel_fb
= to_intel_framebuffer(crtc
->fb
);
4105 intel_mark_busy(dev
, intel_fb
->obj
);
4109 temp
|= CURSOR_POS_SIGN
<< CURSOR_X_SHIFT
;
4113 temp
|= CURSOR_POS_SIGN
<< CURSOR_Y_SHIFT
;
4117 temp
|= x
<< CURSOR_X_SHIFT
;
4118 temp
|= y
<< CURSOR_Y_SHIFT
;
4120 adder
= intel_crtc
->cursor_addr
;
4121 I915_WRITE((pipe
== 0) ? CURAPOS
: CURBPOS
, temp
);
4122 I915_WRITE((pipe
== 0) ? CURABASE
: CURBBASE
, adder
);
4127 /** Sets the color ramps on behalf of RandR */
4128 void intel_crtc_fb_gamma_set(struct drm_crtc
*crtc
, u16 red
, u16 green
,
4129 u16 blue
, int regno
)
4131 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4133 intel_crtc
->lut_r
[regno
] = red
>> 8;
4134 intel_crtc
->lut_g
[regno
] = green
>> 8;
4135 intel_crtc
->lut_b
[regno
] = blue
>> 8;
4138 void intel_crtc_fb_gamma_get(struct drm_crtc
*crtc
, u16
*red
, u16
*green
,
4139 u16
*blue
, int regno
)
4141 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4143 *red
= intel_crtc
->lut_r
[regno
] << 8;
4144 *green
= intel_crtc
->lut_g
[regno
] << 8;
4145 *blue
= intel_crtc
->lut_b
[regno
] << 8;
4148 static void intel_crtc_gamma_set(struct drm_crtc
*crtc
, u16
*red
, u16
*green
,
4149 u16
*blue
, uint32_t size
)
4151 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4157 for (i
= 0; i
< 256; i
++) {
4158 intel_crtc
->lut_r
[i
] = red
[i
] >> 8;
4159 intel_crtc
->lut_g
[i
] = green
[i
] >> 8;
4160 intel_crtc
->lut_b
[i
] = blue
[i
] >> 8;
4163 intel_crtc_load_lut(crtc
);
4167 * Get a pipe with a simple mode set on it for doing load-based monitor
4170 * It will be up to the load-detect code to adjust the pipe as appropriate for
4171 * its requirements. The pipe will be connected to no other encoders.
4173 * Currently this code will only succeed if there is a pipe with no encoders
4174 * configured for it. In the future, it could choose to temporarily disable
4175 * some outputs to free up a pipe for its use.
4177 * \return crtc, or NULL if no pipes are available.
4180 /* VESA 640x480x72Hz mode to set on the pipe */
4181 static struct drm_display_mode load_detect_mode
= {
4182 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT
, 31500, 640, 664,
4183 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_NVSYNC
),
4186 struct drm_crtc
*intel_get_load_detect_pipe(struct intel_encoder
*intel_encoder
,
4187 struct drm_connector
*connector
,
4188 struct drm_display_mode
*mode
,
4191 struct intel_crtc
*intel_crtc
;
4192 struct drm_crtc
*possible_crtc
;
4193 struct drm_crtc
*supported_crtc
=NULL
;
4194 struct drm_encoder
*encoder
= &intel_encoder
->enc
;
4195 struct drm_crtc
*crtc
= NULL
;
4196 struct drm_device
*dev
= encoder
->dev
;
4197 struct drm_encoder_helper_funcs
*encoder_funcs
= encoder
->helper_private
;
4198 struct drm_crtc_helper_funcs
*crtc_funcs
;
4202 * Algorithm gets a little messy:
4203 * - if the connector already has an assigned crtc, use it (but make
4204 * sure it's on first)
4205 * - try to find the first unused crtc that can drive this connector,
4206 * and use that if we find one
4207 * - if there are no unused crtcs available, try to use the first
4208 * one we found that supports the connector
4211 /* See if we already have a CRTC for this connector */
4212 if (encoder
->crtc
) {
4213 crtc
= encoder
->crtc
;
4214 /* Make sure the crtc and connector are running */
4215 intel_crtc
= to_intel_crtc(crtc
);
4216 *dpms_mode
= intel_crtc
->dpms_mode
;
4217 if (intel_crtc
->dpms_mode
!= DRM_MODE_DPMS_ON
) {
4218 crtc_funcs
= crtc
->helper_private
;
4219 crtc_funcs
->dpms(crtc
, DRM_MODE_DPMS_ON
);
4220 encoder_funcs
->dpms(encoder
, DRM_MODE_DPMS_ON
);
4225 /* Find an unused one (if possible) */
4226 list_for_each_entry(possible_crtc
, &dev
->mode_config
.crtc_list
, head
) {
4228 if (!(encoder
->possible_crtcs
& (1 << i
)))
4230 if (!possible_crtc
->enabled
) {
4231 crtc
= possible_crtc
;
4234 if (!supported_crtc
)
4235 supported_crtc
= possible_crtc
;
4239 * If we didn't find an unused CRTC, don't use any.
4245 encoder
->crtc
= crtc
;
4246 connector
->encoder
= encoder
;
4247 intel_encoder
->load_detect_temp
= true;
4249 intel_crtc
= to_intel_crtc(crtc
);
4250 *dpms_mode
= intel_crtc
->dpms_mode
;
4252 if (!crtc
->enabled
) {
4254 mode
= &load_detect_mode
;
4255 drm_crtc_helper_set_mode(crtc
, mode
, 0, 0, crtc
->fb
);
4257 if (intel_crtc
->dpms_mode
!= DRM_MODE_DPMS_ON
) {
4258 crtc_funcs
= crtc
->helper_private
;
4259 crtc_funcs
->dpms(crtc
, DRM_MODE_DPMS_ON
);
4262 /* Add this connector to the crtc */
4263 encoder_funcs
->mode_set(encoder
, &crtc
->mode
, &crtc
->mode
);
4264 encoder_funcs
->commit(encoder
);
4266 /* let the connector get through one full cycle before testing */
4267 intel_wait_for_vblank(dev
);
4272 void intel_release_load_detect_pipe(struct intel_encoder
*intel_encoder
,
4273 struct drm_connector
*connector
, int dpms_mode
)
4275 struct drm_encoder
*encoder
= &intel_encoder
->enc
;
4276 struct drm_device
*dev
= encoder
->dev
;
4277 struct drm_crtc
*crtc
= encoder
->crtc
;
4278 struct drm_encoder_helper_funcs
*encoder_funcs
= encoder
->helper_private
;
4279 struct drm_crtc_helper_funcs
*crtc_funcs
= crtc
->helper_private
;
4281 if (intel_encoder
->load_detect_temp
) {
4282 encoder
->crtc
= NULL
;
4283 connector
->encoder
= NULL
;
4284 intel_encoder
->load_detect_temp
= false;
4285 crtc
->enabled
= drm_helper_crtc_in_use(crtc
);
4286 drm_helper_disable_unused_functions(dev
);
4289 /* Switch crtc and encoder back off if necessary */
4290 if (crtc
->enabled
&& dpms_mode
!= DRM_MODE_DPMS_ON
) {
4291 if (encoder
->crtc
== crtc
)
4292 encoder_funcs
->dpms(encoder
, dpms_mode
);
4293 crtc_funcs
->dpms(crtc
, dpms_mode
);
4297 /* Returns the clock of the currently programmed mode of the given pipe. */
4298 static int intel_crtc_clock_get(struct drm_device
*dev
, struct drm_crtc
*crtc
)
4300 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4301 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4302 int pipe
= intel_crtc
->pipe
;
4303 u32 dpll
= I915_READ((pipe
== 0) ? DPLL_A
: DPLL_B
);
4305 intel_clock_t clock
;
4307 if ((dpll
& DISPLAY_RATE_SELECT_FPA1
) == 0)
4308 fp
= I915_READ((pipe
== 0) ? FPA0
: FPB0
);
4310 fp
= I915_READ((pipe
== 0) ? FPA1
: FPB1
);
4312 clock
.m1
= (fp
& FP_M1_DIV_MASK
) >> FP_M1_DIV_SHIFT
;
4313 if (IS_PINEVIEW(dev
)) {
4314 clock
.n
= ffs((fp
& FP_N_PINEVIEW_DIV_MASK
) >> FP_N_DIV_SHIFT
) - 1;
4315 clock
.m2
= (fp
& FP_M2_PINEVIEW_DIV_MASK
) >> FP_M2_DIV_SHIFT
;
4317 clock
.n
= (fp
& FP_N_DIV_MASK
) >> FP_N_DIV_SHIFT
;
4318 clock
.m2
= (fp
& FP_M2_DIV_MASK
) >> FP_M2_DIV_SHIFT
;
4322 if (IS_PINEVIEW(dev
))
4323 clock
.p1
= ffs((dpll
& DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW
) >>
4324 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW
);
4326 clock
.p1
= ffs((dpll
& DPLL_FPA01_P1_POST_DIV_MASK
) >>
4327 DPLL_FPA01_P1_POST_DIV_SHIFT
);
4329 switch (dpll
& DPLL_MODE_MASK
) {
4330 case DPLLB_MODE_DAC_SERIAL
:
4331 clock
.p2
= dpll
& DPLL_DAC_SERIAL_P2_CLOCK_DIV_5
?
4334 case DPLLB_MODE_LVDS
:
4335 clock
.p2
= dpll
& DPLLB_LVDS_P2_CLOCK_DIV_7
?
4339 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
4340 "mode\n", (int)(dpll
& DPLL_MODE_MASK
));
4344 /* XXX: Handle the 100Mhz refclk */
4345 intel_clock(dev
, 96000, &clock
);
4347 bool is_lvds
= (pipe
== 1) && (I915_READ(LVDS
) & LVDS_PORT_EN
);
4350 clock
.p1
= ffs((dpll
& DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS
) >>
4351 DPLL_FPA01_P1_POST_DIV_SHIFT
);
4354 if ((dpll
& PLL_REF_INPUT_MASK
) ==
4355 PLLB_REF_INPUT_SPREADSPECTRUMIN
) {
4356 /* XXX: might not be 66MHz */
4357 intel_clock(dev
, 66000, &clock
);
4359 intel_clock(dev
, 48000, &clock
);
4361 if (dpll
& PLL_P1_DIVIDE_BY_TWO
)
4364 clock
.p1
= ((dpll
& DPLL_FPA01_P1_POST_DIV_MASK_I830
) >>
4365 DPLL_FPA01_P1_POST_DIV_SHIFT
) + 2;
4367 if (dpll
& PLL_P2_DIVIDE_BY_4
)
4372 intel_clock(dev
, 48000, &clock
);
4376 /* XXX: It would be nice to validate the clocks, but we can't reuse
4377 * i830PllIsValid() because it relies on the xf86_config connector
4378 * configuration being accurate, which it isn't necessarily.
4384 /** Returns the currently programmed mode of the given pipe. */
4385 struct drm_display_mode
*intel_crtc_mode_get(struct drm_device
*dev
,
4386 struct drm_crtc
*crtc
)
4388 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4389 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4390 int pipe
= intel_crtc
->pipe
;
4391 struct drm_display_mode
*mode
;
4392 int htot
= I915_READ((pipe
== 0) ? HTOTAL_A
: HTOTAL_B
);
4393 int hsync
= I915_READ((pipe
== 0) ? HSYNC_A
: HSYNC_B
);
4394 int vtot
= I915_READ((pipe
== 0) ? VTOTAL_A
: VTOTAL_B
);
4395 int vsync
= I915_READ((pipe
== 0) ? VSYNC_A
: VSYNC_B
);
4397 mode
= kzalloc(sizeof(*mode
), GFP_KERNEL
);
4401 mode
->clock
= intel_crtc_clock_get(dev
, crtc
);
4402 mode
->hdisplay
= (htot
& 0xffff) + 1;
4403 mode
->htotal
= ((htot
& 0xffff0000) >> 16) + 1;
4404 mode
->hsync_start
= (hsync
& 0xffff) + 1;
4405 mode
->hsync_end
= ((hsync
& 0xffff0000) >> 16) + 1;
4406 mode
->vdisplay
= (vtot
& 0xffff) + 1;
4407 mode
->vtotal
= ((vtot
& 0xffff0000) >> 16) + 1;
4408 mode
->vsync_start
= (vsync
& 0xffff) + 1;
4409 mode
->vsync_end
= ((vsync
& 0xffff0000) >> 16) + 1;
4411 drm_mode_set_name(mode
);
4412 drm_mode_set_crtcinfo(mode
, 0);
4417 #define GPU_IDLE_TIMEOUT 500 /* ms */
4419 /* When this timer fires, we've been idle for awhile */
4420 static void intel_gpu_idle_timer(unsigned long arg
)
4422 struct drm_device
*dev
= (struct drm_device
*)arg
;
4423 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4425 DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4427 dev_priv
->busy
= false;
4429 queue_work(dev_priv
->wq
, &dev_priv
->idle_work
);
4432 #define CRTC_IDLE_TIMEOUT 1000 /* ms */
4434 static void intel_crtc_idle_timer(unsigned long arg
)
4436 struct intel_crtc
*intel_crtc
= (struct intel_crtc
*)arg
;
4437 struct drm_crtc
*crtc
= &intel_crtc
->base
;
4438 drm_i915_private_t
*dev_priv
= crtc
->dev
->dev_private
;
4440 DRM_DEBUG_DRIVER("idle timer fired, downclocking\n");
4442 intel_crtc
->busy
= false;
4444 queue_work(dev_priv
->wq
, &dev_priv
->idle_work
);
4447 static void intel_increase_pllclock(struct drm_crtc
*crtc
, bool schedule
)
4449 struct drm_device
*dev
= crtc
->dev
;
4450 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4451 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4452 int pipe
= intel_crtc
->pipe
;
4453 int dpll_reg
= (pipe
== 0) ? DPLL_A
: DPLL_B
;
4454 int dpll
= I915_READ(dpll_reg
);
4456 if (HAS_PCH_SPLIT(dev
))
4459 if (!dev_priv
->lvds_downclock_avail
)
4462 if (!HAS_PIPE_CXSR(dev
) && (dpll
& DISPLAY_RATE_SELECT_FPA1
)) {
4463 DRM_DEBUG_DRIVER("upclocking LVDS\n");
4465 /* Unlock panel regs */
4466 I915_WRITE(PP_CONTROL
, I915_READ(PP_CONTROL
) | (0xabcd << 16));
4468 dpll
&= ~DISPLAY_RATE_SELECT_FPA1
;
4469 I915_WRITE(dpll_reg
, dpll
);
4470 dpll
= I915_READ(dpll_reg
);
4471 intel_wait_for_vblank(dev
);
4472 dpll
= I915_READ(dpll_reg
);
4473 if (dpll
& DISPLAY_RATE_SELECT_FPA1
)
4474 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
4476 /* ...and lock them again */
4477 I915_WRITE(PP_CONTROL
, I915_READ(PP_CONTROL
) & 0x3);
4480 /* Schedule downclock */
4482 mod_timer(&intel_crtc
->idle_timer
, jiffies
+
4483 msecs_to_jiffies(CRTC_IDLE_TIMEOUT
));
4486 static void intel_decrease_pllclock(struct drm_crtc
*crtc
)
4488 struct drm_device
*dev
= crtc
->dev
;
4489 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4490 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4491 int pipe
= intel_crtc
->pipe
;
4492 int dpll_reg
= (pipe
== 0) ? DPLL_A
: DPLL_B
;
4493 int dpll
= I915_READ(dpll_reg
);
4495 if (HAS_PCH_SPLIT(dev
))
4498 if (!dev_priv
->lvds_downclock_avail
)
4502 * Since this is called by a timer, we should never get here in
4505 if (!HAS_PIPE_CXSR(dev
) && intel_crtc
->lowfreq_avail
) {
4506 DRM_DEBUG_DRIVER("downclocking LVDS\n");
4508 /* Unlock panel regs */
4509 I915_WRITE(PP_CONTROL
, I915_READ(PP_CONTROL
) | (0xabcd << 16));
4511 dpll
|= DISPLAY_RATE_SELECT_FPA1
;
4512 I915_WRITE(dpll_reg
, dpll
);
4513 dpll
= I915_READ(dpll_reg
);
4514 intel_wait_for_vblank(dev
);
4515 dpll
= I915_READ(dpll_reg
);
4516 if (!(dpll
& DISPLAY_RATE_SELECT_FPA1
))
4517 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
4519 /* ...and lock them again */
4520 I915_WRITE(PP_CONTROL
, I915_READ(PP_CONTROL
) & 0x3);
4526 * intel_idle_update - adjust clocks for idleness
4527 * @work: work struct
4529 * Either the GPU or display (or both) went idle. Check the busy status
4530 * here and adjust the CRTC and GPU clocks as necessary.
4532 static void intel_idle_update(struct work_struct
*work
)
4534 drm_i915_private_t
*dev_priv
= container_of(work
, drm_i915_private_t
,
4536 struct drm_device
*dev
= dev_priv
->dev
;
4537 struct drm_crtc
*crtc
;
4538 struct intel_crtc
*intel_crtc
;
4541 if (!i915_powersave
)
4544 mutex_lock(&dev
->struct_mutex
);
4546 i915_update_gfx_val(dev_priv
);
4548 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
4549 /* Skip inactive CRTCs */
4554 intel_crtc
= to_intel_crtc(crtc
);
4555 if (!intel_crtc
->busy
)
4556 intel_decrease_pllclock(crtc
);
4559 if ((enabled
== 1) && (IS_I945G(dev
) || IS_I945GM(dev
))) {
4560 DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
4561 I915_WRITE(FW_BLC_SELF
, FW_BLC_SELF_EN_MASK
| FW_BLC_SELF_EN
);
4564 mutex_unlock(&dev
->struct_mutex
);
4568 * intel_mark_busy - mark the GPU and possibly the display busy
4570 * @obj: object we're operating on
4572 * Callers can use this function to indicate that the GPU is busy processing
4573 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
4574 * buffer), we'll also mark the display as busy, so we know to increase its
4577 void intel_mark_busy(struct drm_device
*dev
, struct drm_gem_object
*obj
)
4579 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4580 struct drm_crtc
*crtc
= NULL
;
4581 struct intel_framebuffer
*intel_fb
;
4582 struct intel_crtc
*intel_crtc
;
4584 if (!drm_core_check_feature(dev
, DRIVER_MODESET
))
4587 if (!dev_priv
->busy
) {
4588 if (IS_I945G(dev
) || IS_I945GM(dev
)) {
4591 DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4592 fw_blc_self
= I915_READ(FW_BLC_SELF
);
4593 fw_blc_self
&= ~FW_BLC_SELF_EN
;
4594 I915_WRITE(FW_BLC_SELF
, fw_blc_self
| FW_BLC_SELF_EN_MASK
);
4596 dev_priv
->busy
= true;
4598 mod_timer(&dev_priv
->idle_timer
, jiffies
+
4599 msecs_to_jiffies(GPU_IDLE_TIMEOUT
));
4601 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
4605 intel_crtc
= to_intel_crtc(crtc
);
4606 intel_fb
= to_intel_framebuffer(crtc
->fb
);
4607 if (intel_fb
->obj
== obj
) {
4608 if (!intel_crtc
->busy
) {
4609 if (IS_I945G(dev
) || IS_I945GM(dev
)) {
4612 DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
4613 fw_blc_self
= I915_READ(FW_BLC_SELF
);
4614 fw_blc_self
&= ~FW_BLC_SELF_EN
;
4615 I915_WRITE(FW_BLC_SELF
, fw_blc_self
| FW_BLC_SELF_EN_MASK
);
4617 /* Non-busy -> busy, upclock */
4618 intel_increase_pllclock(crtc
, true);
4619 intel_crtc
->busy
= true;
4621 /* Busy -> busy, put off timer */
4622 mod_timer(&intel_crtc
->idle_timer
, jiffies
+
4623 msecs_to_jiffies(CRTC_IDLE_TIMEOUT
));
4629 static void intel_crtc_destroy(struct drm_crtc
*crtc
)
4631 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4633 drm_crtc_cleanup(crtc
);
4637 struct intel_unpin_work
{
4638 struct work_struct work
;
4639 struct drm_device
*dev
;
4640 struct drm_gem_object
*old_fb_obj
;
4641 struct drm_gem_object
*pending_flip_obj
;
4642 struct drm_pending_vblank_event
*event
;
4646 static void intel_unpin_work_fn(struct work_struct
*__work
)
4648 struct intel_unpin_work
*work
=
4649 container_of(__work
, struct intel_unpin_work
, work
);
4651 mutex_lock(&work
->dev
->struct_mutex
);
4652 i915_gem_object_unpin(work
->old_fb_obj
);
4653 drm_gem_object_unreference(work
->pending_flip_obj
);
4654 drm_gem_object_unreference(work
->old_fb_obj
);
4655 mutex_unlock(&work
->dev
->struct_mutex
);
4659 static void do_intel_finish_page_flip(struct drm_device
*dev
,
4660 struct drm_crtc
*crtc
)
4662 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4663 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4664 struct intel_unpin_work
*work
;
4665 struct drm_i915_gem_object
*obj_priv
;
4666 struct drm_pending_vblank_event
*e
;
4668 unsigned long flags
;
4670 /* Ignore early vblank irqs */
4671 if (intel_crtc
== NULL
)
4674 spin_lock_irqsave(&dev
->event_lock
, flags
);
4675 work
= intel_crtc
->unpin_work
;
4676 if (work
== NULL
|| !work
->pending
) {
4677 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4681 intel_crtc
->unpin_work
= NULL
;
4682 drm_vblank_put(dev
, intel_crtc
->pipe
);
4686 do_gettimeofday(&now
);
4687 e
->event
.sequence
= drm_vblank_count(dev
, intel_crtc
->pipe
);
4688 e
->event
.tv_sec
= now
.tv_sec
;
4689 e
->event
.tv_usec
= now
.tv_usec
;
4690 list_add_tail(&e
->base
.link
,
4691 &e
->base
.file_priv
->event_list
);
4692 wake_up_interruptible(&e
->base
.file_priv
->event_wait
);
4695 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4697 obj_priv
= to_intel_bo(work
->pending_flip_obj
);
4699 /* Initial scanout buffer will have a 0 pending flip count */
4700 if ((atomic_read(&obj_priv
->pending_flip
) == 0) ||
4701 atomic_dec_and_test(&obj_priv
->pending_flip
))
4702 DRM_WAKEUP(&dev_priv
->pending_flip_queue
);
4703 schedule_work(&work
->work
);
4705 trace_i915_flip_complete(intel_crtc
->plane
, work
->pending_flip_obj
);
4708 void intel_finish_page_flip(struct drm_device
*dev
, int pipe
)
4710 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4711 struct drm_crtc
*crtc
= dev_priv
->pipe_to_crtc_mapping
[pipe
];
4713 do_intel_finish_page_flip(dev
, crtc
);
4716 void intel_finish_page_flip_plane(struct drm_device
*dev
, int plane
)
4718 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4719 struct drm_crtc
*crtc
= dev_priv
->plane_to_crtc_mapping
[plane
];
4721 do_intel_finish_page_flip(dev
, crtc
);
4724 void intel_prepare_page_flip(struct drm_device
*dev
, int plane
)
4726 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4727 struct intel_crtc
*intel_crtc
=
4728 to_intel_crtc(dev_priv
->plane_to_crtc_mapping
[plane
]);
4729 unsigned long flags
;
4731 spin_lock_irqsave(&dev
->event_lock
, flags
);
4732 if (intel_crtc
->unpin_work
) {
4733 intel_crtc
->unpin_work
->pending
= 1;
4735 DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n");
4737 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4740 static int intel_crtc_page_flip(struct drm_crtc
*crtc
,
4741 struct drm_framebuffer
*fb
,
4742 struct drm_pending_vblank_event
*event
)
4744 struct drm_device
*dev
= crtc
->dev
;
4745 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4746 struct intel_framebuffer
*intel_fb
;
4747 struct drm_i915_gem_object
*obj_priv
;
4748 struct drm_gem_object
*obj
;
4749 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4750 struct intel_unpin_work
*work
;
4751 unsigned long flags
;
4752 int pipesrc_reg
= (intel_crtc
->pipe
== 0) ? PIPEASRC
: PIPEBSRC
;
4756 work
= kzalloc(sizeof *work
, GFP_KERNEL
);
4760 work
->event
= event
;
4761 work
->dev
= crtc
->dev
;
4762 intel_fb
= to_intel_framebuffer(crtc
->fb
);
4763 work
->old_fb_obj
= intel_fb
->obj
;
4764 INIT_WORK(&work
->work
, intel_unpin_work_fn
);
4766 /* We borrow the event spin lock for protecting unpin_work */
4767 spin_lock_irqsave(&dev
->event_lock
, flags
);
4768 if (intel_crtc
->unpin_work
) {
4769 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4772 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
4775 intel_crtc
->unpin_work
= work
;
4776 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4778 intel_fb
= to_intel_framebuffer(fb
);
4779 obj
= intel_fb
->obj
;
4781 mutex_lock(&dev
->struct_mutex
);
4782 ret
= intel_pin_and_fence_fb_obj(dev
, obj
);
4784 mutex_unlock(&dev
->struct_mutex
);
4786 spin_lock_irqsave(&dev
->event_lock
, flags
);
4787 intel_crtc
->unpin_work
= NULL
;
4788 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
4792 DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
4797 /* Reference the objects for the scheduled work. */
4798 drm_gem_object_reference(work
->old_fb_obj
);
4799 drm_gem_object_reference(obj
);
4802 i915_gem_object_flush_write_domain(obj
);
4803 drm_vblank_get(dev
, intel_crtc
->pipe
);
4804 obj_priv
= to_intel_bo(obj
);
4805 atomic_inc(&obj_priv
->pending_flip
);
4806 work
->pending_flip_obj
= obj
;
4808 if (intel_crtc
->plane
)
4809 flip_mask
= I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
;
4811 flip_mask
= I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT
;
4813 /* Wait for any previous flip to finish */
4815 while (I915_READ(ISR
) & flip_mask
)
4819 if (IS_I965G(dev
)) {
4820 OUT_RING(MI_DISPLAY_FLIP
|
4821 MI_DISPLAY_FLIP_PLANE(intel_crtc
->plane
));
4822 OUT_RING(fb
->pitch
);
4823 OUT_RING(obj_priv
->gtt_offset
| obj_priv
->tiling_mode
);
4824 pipesrc
= I915_READ(pipesrc_reg
);
4825 OUT_RING(pipesrc
& 0x0fff0fff);
4827 OUT_RING(MI_DISPLAY_FLIP_I915
|
4828 MI_DISPLAY_FLIP_PLANE(intel_crtc
->plane
));
4829 OUT_RING(fb
->pitch
);
4830 OUT_RING(obj_priv
->gtt_offset
);
4835 mutex_unlock(&dev
->struct_mutex
);
4837 trace_i915_flip_request(intel_crtc
->plane
, obj
);
4842 static const struct drm_crtc_helper_funcs intel_helper_funcs
= {
4843 .dpms
= intel_crtc_dpms
,
4844 .mode_fixup
= intel_crtc_mode_fixup
,
4845 .mode_set
= intel_crtc_mode_set
,
4846 .mode_set_base
= intel_pipe_set_base
,
4847 .prepare
= intel_crtc_prepare
,
4848 .commit
= intel_crtc_commit
,
4849 .load_lut
= intel_crtc_load_lut
,
4852 static const struct drm_crtc_funcs intel_crtc_funcs
= {
4853 .cursor_set
= intel_crtc_cursor_set
,
4854 .cursor_move
= intel_crtc_cursor_move
,
4855 .gamma_set
= intel_crtc_gamma_set
,
4856 .set_config
= drm_crtc_helper_set_config
,
4857 .destroy
= intel_crtc_destroy
,
4858 .page_flip
= intel_crtc_page_flip
,
4862 static void intel_crtc_init(struct drm_device
*dev
, int pipe
)
4864 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4865 struct intel_crtc
*intel_crtc
;
4868 intel_crtc
= kzalloc(sizeof(struct intel_crtc
) + (INTELFB_CONN_LIMIT
* sizeof(struct drm_connector
*)), GFP_KERNEL
);
4869 if (intel_crtc
== NULL
)
4872 drm_crtc_init(dev
, &intel_crtc
->base
, &intel_crtc_funcs
);
4874 drm_mode_crtc_set_gamma_size(&intel_crtc
->base
, 256);
4875 intel_crtc
->pipe
= pipe
;
4876 intel_crtc
->plane
= pipe
;
4877 for (i
= 0; i
< 256; i
++) {
4878 intel_crtc
->lut_r
[i
] = i
;
4879 intel_crtc
->lut_g
[i
] = i
;
4880 intel_crtc
->lut_b
[i
] = i
;
4883 /* Swap pipes & planes for FBC on pre-965 */
4884 intel_crtc
->pipe
= pipe
;
4885 intel_crtc
->plane
= pipe
;
4886 if (IS_MOBILE(dev
) && (IS_I9XX(dev
) && !IS_I965G(dev
))) {
4887 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
4888 intel_crtc
->plane
= ((pipe
== 0) ? 1 : 0);
4891 BUG_ON(pipe
>= ARRAY_SIZE(dev_priv
->plane_to_crtc_mapping
) ||
4892 dev_priv
->plane_to_crtc_mapping
[intel_crtc
->plane
] != NULL
);
4893 dev_priv
->plane_to_crtc_mapping
[intel_crtc
->plane
] = &intel_crtc
->base
;
4894 dev_priv
->pipe_to_crtc_mapping
[intel_crtc
->pipe
] = &intel_crtc
->base
;
4896 intel_crtc
->cursor_addr
= 0;
4897 intel_crtc
->dpms_mode
= DRM_MODE_DPMS_OFF
;
4898 drm_crtc_helper_add(&intel_crtc
->base
, &intel_helper_funcs
);
4900 intel_crtc
->busy
= false;
4902 setup_timer(&intel_crtc
->idle_timer
, intel_crtc_idle_timer
,
4903 (unsigned long)intel_crtc
);
4906 int intel_get_pipe_from_crtc_id(struct drm_device
*dev
, void *data
,
4907 struct drm_file
*file_priv
)
4909 drm_i915_private_t
*dev_priv
= dev
->dev_private
;
4910 struct drm_i915_get_pipe_from_crtc_id
*pipe_from_crtc_id
= data
;
4911 struct drm_mode_object
*drmmode_obj
;
4912 struct intel_crtc
*crtc
;
4915 DRM_ERROR("called with no initialization\n");
4919 drmmode_obj
= drm_mode_object_find(dev
, pipe_from_crtc_id
->crtc_id
,
4920 DRM_MODE_OBJECT_CRTC
);
4923 DRM_ERROR("no such CRTC id\n");
4927 crtc
= to_intel_crtc(obj_to_crtc(drmmode_obj
));
4928 pipe_from_crtc_id
->pipe
= crtc
->pipe
;
4933 struct drm_crtc
*intel_get_crtc_from_pipe(struct drm_device
*dev
, int pipe
)
4935 struct drm_crtc
*crtc
= NULL
;
4937 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
4938 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
4939 if (intel_crtc
->pipe
== pipe
)
4945 static int intel_encoder_clones(struct drm_device
*dev
, int type_mask
)
4948 struct drm_encoder
*encoder
;
4951 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, head
) {
4952 struct intel_encoder
*intel_encoder
= enc_to_intel_encoder(encoder
);
4953 if (type_mask
& intel_encoder
->clone_mask
)
4954 index_mask
|= (1 << entry
);
4961 static void intel_setup_outputs(struct drm_device
*dev
)
4963 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4964 struct drm_encoder
*encoder
;
4966 intel_crt_init(dev
);
4968 /* Set up integrated LVDS */
4969 if (IS_MOBILE(dev
) && !IS_I830(dev
))
4970 intel_lvds_init(dev
);
4972 if (HAS_PCH_SPLIT(dev
)) {
4975 if (IS_MOBILE(dev
) && (I915_READ(DP_A
) & DP_DETECTED
))
4976 intel_dp_init(dev
, DP_A
);
4978 if (I915_READ(HDMIB
) & PORT_DETECTED
) {
4979 /* PCH SDVOB multiplex with HDMIB */
4980 found
= intel_sdvo_init(dev
, PCH_SDVOB
);
4982 intel_hdmi_init(dev
, HDMIB
);
4983 if (!found
&& (I915_READ(PCH_DP_B
) & DP_DETECTED
))
4984 intel_dp_init(dev
, PCH_DP_B
);
4987 if (I915_READ(HDMIC
) & PORT_DETECTED
)
4988 intel_hdmi_init(dev
, HDMIC
);
4990 if (I915_READ(HDMID
) & PORT_DETECTED
)
4991 intel_hdmi_init(dev
, HDMID
);
4993 if (I915_READ(PCH_DP_C
) & DP_DETECTED
)
4994 intel_dp_init(dev
, PCH_DP_C
);
4996 if (I915_READ(PCH_DP_D
) & DP_DETECTED
)
4997 intel_dp_init(dev
, PCH_DP_D
);
4999 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev
)) {
5002 if (I915_READ(SDVOB
) & SDVO_DETECTED
) {
5003 DRM_DEBUG_KMS("probing SDVOB\n");
5004 found
= intel_sdvo_init(dev
, SDVOB
);
5005 if (!found
&& SUPPORTS_INTEGRATED_HDMI(dev
)) {
5006 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
5007 intel_hdmi_init(dev
, SDVOB
);
5010 if (!found
&& SUPPORTS_INTEGRATED_DP(dev
)) {
5011 DRM_DEBUG_KMS("probing DP_B\n");
5012 intel_dp_init(dev
, DP_B
);
5016 /* Before G4X SDVOC doesn't have its own detect register */
5018 if (I915_READ(SDVOB
) & SDVO_DETECTED
) {
5019 DRM_DEBUG_KMS("probing SDVOC\n");
5020 found
= intel_sdvo_init(dev
, SDVOC
);
5023 if (!found
&& (I915_READ(SDVOC
) & SDVO_DETECTED
)) {
5025 if (SUPPORTS_INTEGRATED_HDMI(dev
)) {
5026 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
5027 intel_hdmi_init(dev
, SDVOC
);
5029 if (SUPPORTS_INTEGRATED_DP(dev
)) {
5030 DRM_DEBUG_KMS("probing DP_C\n");
5031 intel_dp_init(dev
, DP_C
);
5035 if (SUPPORTS_INTEGRATED_DP(dev
) &&
5036 (I915_READ(DP_D
) & DP_DETECTED
)) {
5037 DRM_DEBUG_KMS("probing DP_D\n");
5038 intel_dp_init(dev
, DP_D
);
5040 } else if (IS_GEN2(dev
))
5041 intel_dvo_init(dev
);
5043 if (SUPPORTS_TV(dev
))
5046 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, head
) {
5047 struct intel_encoder
*intel_encoder
= enc_to_intel_encoder(encoder
);
5049 encoder
->possible_crtcs
= intel_encoder
->crtc_mask
;
5050 encoder
->possible_clones
= intel_encoder_clones(dev
,
5051 intel_encoder
->clone_mask
);
5055 static void intel_user_framebuffer_destroy(struct drm_framebuffer
*fb
)
5057 struct intel_framebuffer
*intel_fb
= to_intel_framebuffer(fb
);
5059 drm_framebuffer_cleanup(fb
);
5060 drm_gem_object_unreference_unlocked(intel_fb
->obj
);
5065 static int intel_user_framebuffer_create_handle(struct drm_framebuffer
*fb
,
5066 struct drm_file
*file_priv
,
5067 unsigned int *handle
)
5069 struct intel_framebuffer
*intel_fb
= to_intel_framebuffer(fb
);
5070 struct drm_gem_object
*object
= intel_fb
->obj
;
5072 return drm_gem_handle_create(file_priv
, object
, handle
);
5075 static const struct drm_framebuffer_funcs intel_fb_funcs
= {
5076 .destroy
= intel_user_framebuffer_destroy
,
5077 .create_handle
= intel_user_framebuffer_create_handle
,
5080 int intel_framebuffer_init(struct drm_device
*dev
,
5081 struct intel_framebuffer
*intel_fb
,
5082 struct drm_mode_fb_cmd
*mode_cmd
,
5083 struct drm_gem_object
*obj
)
5087 ret
= drm_framebuffer_init(dev
, &intel_fb
->base
, &intel_fb_funcs
);
5089 DRM_ERROR("framebuffer init failed %d\n", ret
);
5093 drm_helper_mode_fill_fb_struct(&intel_fb
->base
, mode_cmd
);
5094 intel_fb
->obj
= obj
;
5098 static struct drm_framebuffer
*
5099 intel_user_framebuffer_create(struct drm_device
*dev
,
5100 struct drm_file
*filp
,
5101 struct drm_mode_fb_cmd
*mode_cmd
)
5103 struct drm_gem_object
*obj
;
5104 struct intel_framebuffer
*intel_fb
;
5107 obj
= drm_gem_object_lookup(dev
, filp
, mode_cmd
->handle
);
5111 intel_fb
= kzalloc(sizeof(*intel_fb
), GFP_KERNEL
);
5115 ret
= intel_framebuffer_init(dev
, intel_fb
,
5118 drm_gem_object_unreference_unlocked(obj
);
5123 return &intel_fb
->base
;
5126 static const struct drm_mode_config_funcs intel_mode_funcs
= {
5127 .fb_create
= intel_user_framebuffer_create
,
5128 .output_poll_changed
= intel_fb_output_poll_changed
,
5131 static struct drm_gem_object
*
5132 intel_alloc_power_context(struct drm_device
*dev
)
5134 struct drm_gem_object
*pwrctx
;
5137 pwrctx
= i915_gem_alloc_object(dev
, 4096);
5139 DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
5143 mutex_lock(&dev
->struct_mutex
);
5144 ret
= i915_gem_object_pin(pwrctx
, 4096);
5146 DRM_ERROR("failed to pin power context: %d\n", ret
);
5150 ret
= i915_gem_object_set_to_gtt_domain(pwrctx
, 1);
5152 DRM_ERROR("failed to set-domain on power context: %d\n", ret
);
5155 mutex_unlock(&dev
->struct_mutex
);
5160 i915_gem_object_unpin(pwrctx
);
5162 drm_gem_object_unreference(pwrctx
);
5163 mutex_unlock(&dev
->struct_mutex
);
5167 bool ironlake_set_drps(struct drm_device
*dev
, u8 val
)
5169 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5172 rgvswctl
= I915_READ16(MEMSWCTL
);
5173 if (rgvswctl
& MEMCTL_CMD_STS
) {
5174 DRM_DEBUG("gpu busy, RCS change rejected\n");
5175 return false; /* still busy with another command */
5178 rgvswctl
= (MEMCTL_CMD_CHFREQ
<< MEMCTL_CMD_SHIFT
) |
5179 (val
<< MEMCTL_FREQ_SHIFT
) | MEMCTL_SFCAVM
;
5180 I915_WRITE16(MEMSWCTL
, rgvswctl
);
5181 POSTING_READ16(MEMSWCTL
);
5183 rgvswctl
|= MEMCTL_CMD_STS
;
5184 I915_WRITE16(MEMSWCTL
, rgvswctl
);
5189 void ironlake_enable_drps(struct drm_device
*dev
)
5191 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5192 u32 rgvmodectl
= I915_READ(MEMMODECTL
);
5193 u8 fmax
, fmin
, fstart
, vstart
;
5196 /* 100ms RC evaluation intervals */
5197 I915_WRITE(RCUPEI
, 100000);
5198 I915_WRITE(RCDNEI
, 100000);
5200 /* Set max/min thresholds to 90ms and 80ms respectively */
5201 I915_WRITE(RCBMAXAVG
, 90000);
5202 I915_WRITE(RCBMINAVG
, 80000);
5204 I915_WRITE(MEMIHYST
, 1);
5206 /* Set up min, max, and cur for interrupt handling */
5207 fmax
= (rgvmodectl
& MEMMODE_FMAX_MASK
) >> MEMMODE_FMAX_SHIFT
;
5208 fmin
= (rgvmodectl
& MEMMODE_FMIN_MASK
);
5209 fstart
= (rgvmodectl
& MEMMODE_FSTART_MASK
) >>
5210 MEMMODE_FSTART_SHIFT
;
5213 vstart
= (I915_READ(PXVFREQ_BASE
+ (fstart
* 4)) & PXVFREQ_PX_MASK
) >>
5216 dev_priv
->fmax
= fstart
; /* IPS callback will increase this */
5217 dev_priv
->fstart
= fstart
;
5219 dev_priv
->max_delay
= fmax
;
5220 dev_priv
->min_delay
= fmin
;
5221 dev_priv
->cur_delay
= fstart
;
5223 DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax
, fmin
,
5226 I915_WRITE(MEMINTREN
, MEMINT_CX_SUPR_EN
| MEMINT_EVAL_CHG_EN
);
5229 * Interrupts will be enabled in ironlake_irq_postinstall
5232 I915_WRITE(VIDSTART
, vstart
);
5233 POSTING_READ(VIDSTART
);
5235 rgvmodectl
|= MEMMODE_SWMODE_EN
;
5236 I915_WRITE(MEMMODECTL
, rgvmodectl
);
5238 while (I915_READ(MEMSWCTL
) & MEMCTL_CMD_STS
) {
5240 DRM_ERROR("stuck trying to change perf mode\n");
5247 ironlake_set_drps(dev
, fstart
);
5249 dev_priv
->last_count1
= I915_READ(0x112e4) + I915_READ(0x112e8) +
5251 dev_priv
->last_time1
= jiffies_to_msecs(jiffies
);
5252 dev_priv
->last_count2
= I915_READ(0x112f4);
5253 getrawmonotonic(&dev_priv
->last_time2
);
5256 void ironlake_disable_drps(struct drm_device
*dev
)
5258 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5259 u16 rgvswctl
= I915_READ16(MEMSWCTL
);
5261 /* Ack interrupts, disable EFC interrupt */
5262 I915_WRITE(MEMINTREN
, I915_READ(MEMINTREN
) & ~MEMINT_EVAL_CHG_EN
);
5263 I915_WRITE(MEMINTRSTS
, MEMINT_EVAL_CHG
);
5264 I915_WRITE(DEIER
, I915_READ(DEIER
) & ~DE_PCU_EVENT
);
5265 I915_WRITE(DEIIR
, DE_PCU_EVENT
);
5266 I915_WRITE(DEIMR
, I915_READ(DEIMR
) | DE_PCU_EVENT
);
5268 /* Go back to the starting frequency */
5269 ironlake_set_drps(dev
, dev_priv
->fstart
);
5271 rgvswctl
|= MEMCTL_CMD_STS
;
5272 I915_WRITE(MEMSWCTL
, rgvswctl
);
5277 static unsigned long intel_pxfreq(u32 vidfreq
)
5280 int div
= (vidfreq
& 0x3f0000) >> 16;
5281 int post
= (vidfreq
& 0x3000) >> 12;
5282 int pre
= (vidfreq
& 0x7);
5287 freq
= ((div
* 133333) / ((1<<post
) * pre
));
5292 void intel_init_emon(struct drm_device
*dev
)
5294 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5299 /* Disable to program */
5303 /* Program energy weights for various events */
5304 I915_WRITE(SDEW
, 0x15040d00);
5305 I915_WRITE(CSIEW0
, 0x007f0000);
5306 I915_WRITE(CSIEW1
, 0x1e220004);
5307 I915_WRITE(CSIEW2
, 0x04000004);
5309 for (i
= 0; i
< 5; i
++)
5310 I915_WRITE(PEW
+ (i
* 4), 0);
5311 for (i
= 0; i
< 3; i
++)
5312 I915_WRITE(DEW
+ (i
* 4), 0);
5314 /* Program P-state weights to account for frequency power adjustment */
5315 for (i
= 0; i
< 16; i
++) {
5316 u32 pxvidfreq
= I915_READ(PXVFREQ_BASE
+ (i
* 4));
5317 unsigned long freq
= intel_pxfreq(pxvidfreq
);
5318 unsigned long vid
= (pxvidfreq
& PXVFREQ_PX_MASK
) >>
5323 val
*= (freq
/ 1000);
5325 val
/= (127*127*900);
5327 DRM_ERROR("bad pxval: %ld\n", val
);
5330 /* Render standby states get 0 weight */
5334 for (i
= 0; i
< 4; i
++) {
5335 u32 val
= (pxw
[i
*4] << 24) | (pxw
[(i
*4)+1] << 16) |
5336 (pxw
[(i
*4)+2] << 8) | (pxw
[(i
*4)+3]);
5337 I915_WRITE(PXW
+ (i
* 4), val
);
5340 /* Adjust magic regs to magic values (more experimental results) */
5341 I915_WRITE(OGW0
, 0);
5342 I915_WRITE(OGW1
, 0);
5343 I915_WRITE(EG0
, 0x00007f00);
5344 I915_WRITE(EG1
, 0x0000000e);
5345 I915_WRITE(EG2
, 0x000e0000);
5346 I915_WRITE(EG3
, 0x68000300);
5347 I915_WRITE(EG4
, 0x42000000);
5348 I915_WRITE(EG5
, 0x00140031);
5352 for (i
= 0; i
< 8; i
++)
5353 I915_WRITE(PXWL
+ (i
* 4), 0);
5355 /* Enable PMON + select events */
5356 I915_WRITE(ECR
, 0x80000019);
5358 lcfuse
= I915_READ(LCFUSE02
);
5360 dev_priv
->corr
= (lcfuse
& LCFUSE_HIV_MASK
);
5363 void intel_init_clock_gating(struct drm_device
*dev
)
5365 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5368 * Disable clock gating reported to work incorrectly according to the
5369 * specs, but enable as much else as we can.
5371 if (HAS_PCH_SPLIT(dev
)) {
5372 uint32_t dspclk_gate
= VRHUNIT_CLOCK_GATE_DISABLE
;
5374 if (IS_IRONLAKE(dev
)) {
5375 /* Required for FBC */
5376 dspclk_gate
|= DPFDUNIT_CLOCK_GATE_DISABLE
;
5377 /* Required for CxSR */
5378 dspclk_gate
|= DPARBUNIT_CLOCK_GATE_DISABLE
;
5380 I915_WRITE(PCH_3DCGDIS0
,
5381 MARIUNIT_CLOCK_GATE_DISABLE
|
5382 SVSMUNIT_CLOCK_GATE_DISABLE
);
5385 I915_WRITE(PCH_DSPCLK_GATE_D
, dspclk_gate
);
5388 * According to the spec the following bits should be set in
5389 * order to enable memory self-refresh
5390 * The bit 22/21 of 0x42004
5391 * The bit 5 of 0x42020
5392 * The bit 15 of 0x45000
5394 if (IS_IRONLAKE(dev
)) {
5395 I915_WRITE(ILK_DISPLAY_CHICKEN2
,
5396 (I915_READ(ILK_DISPLAY_CHICKEN2
) |
5397 ILK_DPARB_GATE
| ILK_VSDPFD_FULL
));
5398 I915_WRITE(ILK_DSPCLK_GATE
,
5399 (I915_READ(ILK_DSPCLK_GATE
) |
5400 ILK_DPARB_CLK_GATE
));
5401 I915_WRITE(DISP_ARB_CTL
,
5402 (I915_READ(DISP_ARB_CTL
) |
5406 } else if (IS_G4X(dev
)) {
5407 uint32_t dspclk_gate
;
5408 I915_WRITE(RENCLK_GATE_D1
, 0);
5409 I915_WRITE(RENCLK_GATE_D2
, VF_UNIT_CLOCK_GATE_DISABLE
|
5410 GS_UNIT_CLOCK_GATE_DISABLE
|
5411 CL_UNIT_CLOCK_GATE_DISABLE
);
5412 I915_WRITE(RAMCLK_GATE_D
, 0);
5413 dspclk_gate
= VRHUNIT_CLOCK_GATE_DISABLE
|
5414 OVRUNIT_CLOCK_GATE_DISABLE
|
5415 OVCUNIT_CLOCK_GATE_DISABLE
;
5417 dspclk_gate
|= DSSUNIT_CLOCK_GATE_DISABLE
;
5418 I915_WRITE(DSPCLK_GATE_D
, dspclk_gate
);
5419 } else if (IS_I965GM(dev
)) {
5420 I915_WRITE(RENCLK_GATE_D1
, I965_RCC_CLOCK_GATE_DISABLE
);
5421 I915_WRITE(RENCLK_GATE_D2
, 0);
5422 I915_WRITE(DSPCLK_GATE_D
, 0);
5423 I915_WRITE(RAMCLK_GATE_D
, 0);
5424 I915_WRITE16(DEUC
, 0);
5425 } else if (IS_I965G(dev
)) {
5426 I915_WRITE(RENCLK_GATE_D1
, I965_RCZ_CLOCK_GATE_DISABLE
|
5427 I965_RCC_CLOCK_GATE_DISABLE
|
5428 I965_RCPB_CLOCK_GATE_DISABLE
|
5429 I965_ISC_CLOCK_GATE_DISABLE
|
5430 I965_FBC_CLOCK_GATE_DISABLE
);
5431 I915_WRITE(RENCLK_GATE_D2
, 0);
5432 } else if (IS_I9XX(dev
)) {
5433 u32 dstate
= I915_READ(D_STATE
);
5435 dstate
|= DSTATE_PLL_D3_OFF
| DSTATE_GFX_CLOCK_GATING
|
5436 DSTATE_DOT_CLOCK_GATING
;
5437 I915_WRITE(D_STATE
, dstate
);
5438 } else if (IS_I85X(dev
) || IS_I865G(dev
)) {
5439 I915_WRITE(RENCLK_GATE_D1
, SV_CLOCK_GATE_DISABLE
);
5440 } else if (IS_I830(dev
)) {
5441 I915_WRITE(DSPCLK_GATE_D
, OVRUNIT_CLOCK_GATE_DISABLE
);
5445 * GPU can automatically power down the render unit if given a page
5448 if (I915_HAS_RC6(dev
) && drm_core_check_feature(dev
, DRIVER_MODESET
)) {
5449 struct drm_i915_gem_object
*obj_priv
= NULL
;
5451 if (dev_priv
->pwrctx
) {
5452 obj_priv
= to_intel_bo(dev_priv
->pwrctx
);
5454 struct drm_gem_object
*pwrctx
;
5456 pwrctx
= intel_alloc_power_context(dev
);
5458 dev_priv
->pwrctx
= pwrctx
;
5459 obj_priv
= to_intel_bo(pwrctx
);
5464 I915_WRITE(PWRCTXA
, obj_priv
->gtt_offset
| PWRCTX_EN
);
5465 I915_WRITE(MCHBAR_RENDER_STANDBY
,
5466 I915_READ(MCHBAR_RENDER_STANDBY
) & ~RCX_SW_EXIT
);
5471 /* Set up chip specific display functions */
5472 static void intel_init_display(struct drm_device
*dev
)
5474 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5476 /* We always want a DPMS function */
5477 if (HAS_PCH_SPLIT(dev
))
5478 dev_priv
->display
.dpms
= ironlake_crtc_dpms
;
5480 dev_priv
->display
.dpms
= i9xx_crtc_dpms
;
5482 if (I915_HAS_FBC(dev
)) {
5484 dev_priv
->display
.fbc_enabled
= g4x_fbc_enabled
;
5485 dev_priv
->display
.enable_fbc
= g4x_enable_fbc
;
5486 dev_priv
->display
.disable_fbc
= g4x_disable_fbc
;
5487 } else if (IS_I965GM(dev
)) {
5488 dev_priv
->display
.fbc_enabled
= i8xx_fbc_enabled
;
5489 dev_priv
->display
.enable_fbc
= i8xx_enable_fbc
;
5490 dev_priv
->display
.disable_fbc
= i8xx_disable_fbc
;
5492 /* 855GM needs testing */
5495 /* Returns the core display clock speed */
5496 if (IS_I945G(dev
) || (IS_G33(dev
) && ! IS_PINEVIEW_M(dev
)))
5497 dev_priv
->display
.get_display_clock_speed
=
5498 i945_get_display_clock_speed
;
5499 else if (IS_I915G(dev
))
5500 dev_priv
->display
.get_display_clock_speed
=
5501 i915_get_display_clock_speed
;
5502 else if (IS_I945GM(dev
) || IS_845G(dev
) || IS_PINEVIEW_M(dev
))
5503 dev_priv
->display
.get_display_clock_speed
=
5504 i9xx_misc_get_display_clock_speed
;
5505 else if (IS_I915GM(dev
))
5506 dev_priv
->display
.get_display_clock_speed
=
5507 i915gm_get_display_clock_speed
;
5508 else if (IS_I865G(dev
))
5509 dev_priv
->display
.get_display_clock_speed
=
5510 i865_get_display_clock_speed
;
5511 else if (IS_I85X(dev
))
5512 dev_priv
->display
.get_display_clock_speed
=
5513 i855_get_display_clock_speed
;
5515 dev_priv
->display
.get_display_clock_speed
=
5516 i830_get_display_clock_speed
;
5518 /* For FIFO watermark updates */
5519 if (HAS_PCH_SPLIT(dev
)) {
5520 if (IS_IRONLAKE(dev
)) {
5521 if (I915_READ(MLTR_ILK
) & ILK_SRLT_MASK
)
5522 dev_priv
->display
.update_wm
= ironlake_update_wm
;
5524 DRM_DEBUG_KMS("Failed to get proper latency. "
5526 dev_priv
->display
.update_wm
= NULL
;
5529 dev_priv
->display
.update_wm
= NULL
;
5530 } else if (IS_PINEVIEW(dev
)) {
5531 if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev
),
5534 dev_priv
->mem_freq
)) {
5535 DRM_INFO("failed to find known CxSR latency "
5536 "(found ddr%s fsb freq %d, mem freq %d), "
5538 (dev_priv
->is_ddr3
== 1) ? "3": "2",
5539 dev_priv
->fsb_freq
, dev_priv
->mem_freq
);
5540 /* Disable CxSR and never update its watermark again */
5541 pineview_disable_cxsr(dev
);
5542 dev_priv
->display
.update_wm
= NULL
;
5544 dev_priv
->display
.update_wm
= pineview_update_wm
;
5545 } else if (IS_G4X(dev
))
5546 dev_priv
->display
.update_wm
= g4x_update_wm
;
5547 else if (IS_I965G(dev
))
5548 dev_priv
->display
.update_wm
= i965_update_wm
;
5549 else if (IS_I9XX(dev
)) {
5550 dev_priv
->display
.update_wm
= i9xx_update_wm
;
5551 dev_priv
->display
.get_fifo_size
= i9xx_get_fifo_size
;
5552 } else if (IS_I85X(dev
)) {
5553 dev_priv
->display
.update_wm
= i9xx_update_wm
;
5554 dev_priv
->display
.get_fifo_size
= i85x_get_fifo_size
;
5556 dev_priv
->display
.update_wm
= i830_update_wm
;
5558 dev_priv
->display
.get_fifo_size
= i845_get_fifo_size
;
5560 dev_priv
->display
.get_fifo_size
= i830_get_fifo_size
;
5564 void intel_modeset_init(struct drm_device
*dev
)
5566 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5569 drm_mode_config_init(dev
);
5571 dev
->mode_config
.min_width
= 0;
5572 dev
->mode_config
.min_height
= 0;
5574 dev
->mode_config
.funcs
= (void *)&intel_mode_funcs
;
5576 intel_init_display(dev
);
5578 if (IS_I965G(dev
)) {
5579 dev
->mode_config
.max_width
= 8192;
5580 dev
->mode_config
.max_height
= 8192;
5581 } else if (IS_I9XX(dev
)) {
5582 dev
->mode_config
.max_width
= 4096;
5583 dev
->mode_config
.max_height
= 4096;
5585 dev
->mode_config
.max_width
= 2048;
5586 dev
->mode_config
.max_height
= 2048;
5589 /* set memory base */
5591 dev
->mode_config
.fb_base
= pci_resource_start(dev
->pdev
, 2);
5593 dev
->mode_config
.fb_base
= pci_resource_start(dev
->pdev
, 0);
5595 if (IS_MOBILE(dev
) || IS_I9XX(dev
))
5596 dev_priv
->num_pipe
= 2;
5598 dev_priv
->num_pipe
= 1;
5599 DRM_DEBUG_KMS("%d display pipe%s available.\n",
5600 dev_priv
->num_pipe
, dev_priv
->num_pipe
> 1 ? "s" : "");
5602 for (i
= 0; i
< dev_priv
->num_pipe
; i
++) {
5603 intel_crtc_init(dev
, i
);
5606 intel_setup_outputs(dev
);
5608 intel_init_clock_gating(dev
);
5610 if (IS_IRONLAKE_M(dev
)) {
5611 ironlake_enable_drps(dev
);
5612 intel_init_emon(dev
);
5615 INIT_WORK(&dev_priv
->idle_work
, intel_idle_update
);
5616 setup_timer(&dev_priv
->idle_timer
, intel_gpu_idle_timer
,
5617 (unsigned long)dev
);
5619 intel_setup_overlay(dev
);
5622 void intel_modeset_cleanup(struct drm_device
*dev
)
5624 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5625 struct drm_crtc
*crtc
;
5626 struct intel_crtc
*intel_crtc
;
5628 mutex_lock(&dev
->struct_mutex
);
5630 drm_kms_helper_poll_fini(dev
);
5631 intel_fbdev_fini(dev
);
5633 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
5634 /* Skip inactive CRTCs */
5638 intel_crtc
= to_intel_crtc(crtc
);
5639 intel_increase_pllclock(crtc
, false);
5640 del_timer_sync(&intel_crtc
->idle_timer
);
5643 del_timer_sync(&dev_priv
->idle_timer
);
5645 if (dev_priv
->display
.disable_fbc
)
5646 dev_priv
->display
.disable_fbc(dev
);
5648 if (dev_priv
->pwrctx
) {
5649 struct drm_i915_gem_object
*obj_priv
;
5651 obj_priv
= to_intel_bo(dev_priv
->pwrctx
);
5652 I915_WRITE(PWRCTXA
, obj_priv
->gtt_offset
&~ PWRCTX_EN
);
5654 i915_gem_object_unpin(dev_priv
->pwrctx
);
5655 drm_gem_object_unreference(dev_priv
->pwrctx
);
5658 if (IS_IRONLAKE_M(dev
))
5659 ironlake_disable_drps(dev
);
5661 mutex_unlock(&dev
->struct_mutex
);
5663 drm_mode_config_cleanup(dev
);
5668 * Return which encoder is currently attached for connector.
5670 struct drm_encoder
*intel_attached_encoder (struct drm_connector
*connector
)
5672 struct drm_mode_object
*obj
;
5673 struct drm_encoder
*encoder
;
5676 for (i
= 0; i
< DRM_CONNECTOR_MAX_ENCODER
; i
++) {
5677 if (connector
->encoder_ids
[i
] == 0)
5680 obj
= drm_mode_object_find(connector
->dev
,
5681 connector
->encoder_ids
[i
],
5682 DRM_MODE_OBJECT_ENCODER
);
5686 encoder
= obj_to_encoder(obj
);
5693 * set vga decode state - true == enable VGA decode
5695 int intel_modeset_vga_set_state(struct drm_device
*dev
, bool state
)
5697 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5700 pci_read_config_word(dev_priv
->bridge_dev
, INTEL_GMCH_CTRL
, &gmch_ctrl
);
5702 gmch_ctrl
&= ~INTEL_GMCH_VGA_DISABLE
;
5704 gmch_ctrl
|= INTEL_GMCH_VGA_DISABLE
;
5705 pci_write_config_word(dev_priv
->bridge_dev
, INTEL_GMCH_CTRL
, gmch_ctrl
);