2 * Copyright © 2008 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 * Keith Packard <keithp@keithp.com>
28 #include <linux/i2c.h>
29 #include <linux/slab.h>
30 #include <linux/export.h>
31 #include <linux/notifier.h>
32 #include <linux/reboot.h>
34 #include <drm/drm_crtc.h>
35 #include <drm/drm_crtc_helper.h>
36 #include <drm/drm_edid.h>
37 #include "intel_drv.h"
38 #include <drm/i915_drm.h>
41 #define DP_LINK_CHECK_TIMEOUT (10 * 1000)
48 static const struct dp_link_dpll gen4_dpll
[] = {
50 { .p1
= 2, .p2
= 10, .n
= 2, .m1
= 23, .m2
= 8 } },
52 { .p1
= 1, .p2
= 10, .n
= 1, .m1
= 14, .m2
= 2 } }
55 static const struct dp_link_dpll pch_dpll
[] = {
57 { .p1
= 2, .p2
= 10, .n
= 1, .m1
= 12, .m2
= 9 } },
59 { .p1
= 1, .p2
= 10, .n
= 2, .m1
= 14, .m2
= 8 } }
62 static const struct dp_link_dpll vlv_dpll
[] = {
64 { .p1
= 3, .p2
= 2, .n
= 5, .m1
= 3, .m2
= 81 } },
66 { .p1
= 2, .p2
= 2, .n
= 1, .m1
= 2, .m2
= 27 } }
70 * CHV supports eDP 1.4 that have more link rates.
71 * Below only provides the fixed rate but exclude variable rate.
73 static const struct dp_link_dpll chv_dpll
[] = {
75 * CHV requires to program fractional division for m2.
76 * m2 is stored in fixed point format using formula below
77 * (m2_int << 22) | m2_fraction
79 { DP_LINK_BW_1_62
, /* m2_int = 32, m2_fraction = 1677722 */
80 { .p1
= 4, .p2
= 2, .n
= 1, .m1
= 2, .m2
= 0x819999a } },
81 { DP_LINK_BW_2_7
, /* m2_int = 27, m2_fraction = 0 */
82 { .p1
= 4, .p2
= 1, .n
= 1, .m1
= 2, .m2
= 0x6c00000 } },
83 { DP_LINK_BW_5_4
, /* m2_int = 27, m2_fraction = 0 */
84 { .p1
= 2, .p2
= 1, .n
= 1, .m1
= 2, .m2
= 0x6c00000 } }
88 * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
89 * @intel_dp: DP struct
91 * If a CPU or PCH DP output is attached to an eDP panel, this function
92 * will return true, and false otherwise.
94 static bool is_edp(struct intel_dp
*intel_dp
)
96 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
98 return intel_dig_port
->base
.type
== INTEL_OUTPUT_EDP
;
101 static struct drm_device
*intel_dp_to_dev(struct intel_dp
*intel_dp
)
103 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
105 return intel_dig_port
->base
.base
.dev
;
108 static struct intel_dp
*intel_attached_dp(struct drm_connector
*connector
)
110 return enc_to_intel_dp(&intel_attached_encoder(connector
)->base
);
113 static void intel_dp_link_down(struct intel_dp
*intel_dp
);
114 static bool edp_panel_vdd_on(struct intel_dp
*intel_dp
);
115 static void edp_panel_vdd_off(struct intel_dp
*intel_dp
, bool sync
);
118 intel_dp_max_link_bw(struct intel_dp
*intel_dp
)
120 int max_link_bw
= intel_dp
->dpcd
[DP_MAX_LINK_RATE
];
121 struct drm_device
*dev
= intel_dp
->attached_connector
->base
.dev
;
123 switch (max_link_bw
) {
124 case DP_LINK_BW_1_62
:
127 case DP_LINK_BW_5_4
: /* 1.2 capable displays may advertise higher bw */
128 if (((IS_HASWELL(dev
) && !IS_HSW_ULX(dev
)) ||
129 INTEL_INFO(dev
)->gen
>= 8) &&
130 intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x12)
131 max_link_bw
= DP_LINK_BW_5_4
;
133 max_link_bw
= DP_LINK_BW_2_7
;
136 WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n",
138 max_link_bw
= DP_LINK_BW_1_62
;
144 static u8
intel_dp_max_lane_count(struct intel_dp
*intel_dp
)
146 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
147 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
148 u8 source_max
, sink_max
;
151 if (HAS_DDI(dev
) && intel_dig_port
->port
== PORT_A
&&
152 (intel_dig_port
->saved_port_bits
& DDI_A_4_LANES
) == 0)
155 sink_max
= drm_dp_max_lane_count(intel_dp
->dpcd
);
157 return min(source_max
, sink_max
);
161 * The units on the numbers in the next two are... bizarre. Examples will
162 * make it clearer; this one parallels an example in the eDP spec.
164 * intel_dp_max_data_rate for one lane of 2.7GHz evaluates as:
166 * 270000 * 1 * 8 / 10 == 216000
168 * The actual data capacity of that configuration is 2.16Gbit/s, so the
169 * units are decakilobits. ->clock in a drm_display_mode is in kilohertz -
170 * or equivalently, kilopixels per second - so for 1680x1050R it'd be
171 * 119000. At 18bpp that's 2142000 kilobits per second.
173 * Thus the strange-looking division by 10 in intel_dp_link_required, to
174 * get the result in decakilobits instead of kilobits.
178 intel_dp_link_required(int pixel_clock
, int bpp
)
180 return (pixel_clock
* bpp
+ 9) / 10;
184 intel_dp_max_data_rate(int max_link_clock
, int max_lanes
)
186 return (max_link_clock
* max_lanes
* 8) / 10;
189 static enum drm_mode_status
190 intel_dp_mode_valid(struct drm_connector
*connector
,
191 struct drm_display_mode
*mode
)
193 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
194 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
195 struct drm_display_mode
*fixed_mode
= intel_connector
->panel
.fixed_mode
;
196 int target_clock
= mode
->clock
;
197 int max_rate
, mode_rate
, max_lanes
, max_link_clock
;
199 if (is_edp(intel_dp
) && fixed_mode
) {
200 if (mode
->hdisplay
> fixed_mode
->hdisplay
)
203 if (mode
->vdisplay
> fixed_mode
->vdisplay
)
206 target_clock
= fixed_mode
->clock
;
209 max_link_clock
= drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp
));
210 max_lanes
= intel_dp_max_lane_count(intel_dp
);
212 max_rate
= intel_dp_max_data_rate(max_link_clock
, max_lanes
);
213 mode_rate
= intel_dp_link_required(target_clock
, 18);
215 if (mode_rate
> max_rate
)
216 return MODE_CLOCK_HIGH
;
218 if (mode
->clock
< 10000)
219 return MODE_CLOCK_LOW
;
221 if (mode
->flags
& DRM_MODE_FLAG_DBLCLK
)
222 return MODE_H_ILLEGAL
;
228 pack_aux(const uint8_t *src
, int src_bytes
)
235 for (i
= 0; i
< src_bytes
; i
++)
236 v
|= ((uint32_t) src
[i
]) << ((3-i
) * 8);
241 unpack_aux(uint32_t src
, uint8_t *dst
, int dst_bytes
)
246 for (i
= 0; i
< dst_bytes
; i
++)
247 dst
[i
] = src
>> ((3-i
) * 8);
250 /* hrawclock is 1/4 the FSB frequency */
252 intel_hrawclk(struct drm_device
*dev
)
254 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
257 /* There is no CLKCFG reg in Valleyview. VLV hrawclk is 200 MHz */
258 if (IS_VALLEYVIEW(dev
))
261 clkcfg
= I915_READ(CLKCFG
);
262 switch (clkcfg
& CLKCFG_FSB_MASK
) {
271 case CLKCFG_FSB_1067
:
273 case CLKCFG_FSB_1333
:
275 /* these two are just a guess; one of them might be right */
276 case CLKCFG_FSB_1600
:
277 case CLKCFG_FSB_1600_ALT
:
285 intel_dp_init_panel_power_sequencer(struct drm_device
*dev
,
286 struct intel_dp
*intel_dp
);
288 intel_dp_init_panel_power_sequencer_registers(struct drm_device
*dev
,
289 struct intel_dp
*intel_dp
);
291 static void pps_lock(struct intel_dp
*intel_dp
)
293 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
294 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
295 struct drm_device
*dev
= encoder
->base
.dev
;
296 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
297 enum intel_display_power_domain power_domain
;
300 * See vlv_power_sequencer_reset() why we need
301 * a power domain reference here.
303 power_domain
= intel_display_port_power_domain(encoder
);
304 intel_display_power_get(dev_priv
, power_domain
);
306 mutex_lock(&dev_priv
->pps_mutex
);
309 static void pps_unlock(struct intel_dp
*intel_dp
)
311 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
312 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
313 struct drm_device
*dev
= encoder
->base
.dev
;
314 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
315 enum intel_display_power_domain power_domain
;
317 mutex_unlock(&dev_priv
->pps_mutex
);
319 power_domain
= intel_display_port_power_domain(encoder
);
320 intel_display_power_put(dev_priv
, power_domain
);
324 vlv_power_sequencer_pipe(struct intel_dp
*intel_dp
)
326 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
327 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
328 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
329 struct intel_encoder
*encoder
;
330 unsigned int pipes
= (1 << PIPE_A
) | (1 << PIPE_B
);
332 lockdep_assert_held(&dev_priv
->pps_mutex
);
334 if (intel_dp
->pps_pipe
!= INVALID_PIPE
)
335 return intel_dp
->pps_pipe
;
338 * We don't have power sequencer currently.
339 * Pick one that's not used by other ports.
341 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
,
343 struct intel_dp
*tmp
;
345 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
348 tmp
= enc_to_intel_dp(&encoder
->base
);
350 if (tmp
->pps_pipe
!= INVALID_PIPE
)
351 pipes
&= ~(1 << tmp
->pps_pipe
);
355 * Didn't find one. This should not happen since there
356 * are two power sequencers and up to two eDP ports.
358 if (WARN_ON(pipes
== 0))
361 intel_dp
->pps_pipe
= ffs(pipes
) - 1;
363 DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n",
364 pipe_name(intel_dp
->pps_pipe
),
365 port_name(intel_dig_port
->port
));
367 /* init power sequencer on this pipe and port */
368 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
369 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
371 return intel_dp
->pps_pipe
;
374 typedef bool (*vlv_pipe_check
)(struct drm_i915_private
*dev_priv
,
377 static bool vlv_pipe_has_pp_on(struct drm_i915_private
*dev_priv
,
380 return I915_READ(VLV_PIPE_PP_STATUS(pipe
)) & PP_ON
;
383 static bool vlv_pipe_has_vdd_on(struct drm_i915_private
*dev_priv
,
386 return I915_READ(VLV_PIPE_PP_CONTROL(pipe
)) & EDP_FORCE_VDD
;
389 static bool vlv_pipe_any(struct drm_i915_private
*dev_priv
,
396 vlv_initial_pps_pipe(struct drm_i915_private
*dev_priv
,
398 vlv_pipe_check pipe_check
)
402 for (pipe
= PIPE_A
; pipe
<= PIPE_B
; pipe
++) {
403 u32 port_sel
= I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe
)) &
404 PANEL_PORT_SELECT_MASK
;
406 if (port_sel
!= PANEL_PORT_SELECT_VLV(port
))
409 if (!pipe_check(dev_priv
, pipe
))
419 vlv_initial_power_sequencer_setup(struct intel_dp
*intel_dp
)
421 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
422 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
423 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
424 enum port port
= intel_dig_port
->port
;
426 lockdep_assert_held(&dev_priv
->pps_mutex
);
428 /* try to find a pipe with this port selected */
429 /* first pick one where the panel is on */
430 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
432 /* didn't find one? pick one where vdd is on */
433 if (intel_dp
->pps_pipe
== INVALID_PIPE
)
434 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
435 vlv_pipe_has_vdd_on
);
436 /* didn't find one? pick one with just the correct port */
437 if (intel_dp
->pps_pipe
== INVALID_PIPE
)
438 intel_dp
->pps_pipe
= vlv_initial_pps_pipe(dev_priv
, port
,
441 /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
442 if (intel_dp
->pps_pipe
== INVALID_PIPE
) {
443 DRM_DEBUG_KMS("no initial power sequencer for port %c\n",
448 DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
449 port_name(port
), pipe_name(intel_dp
->pps_pipe
));
451 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
452 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
455 void vlv_power_sequencer_reset(struct drm_i915_private
*dev_priv
)
457 struct drm_device
*dev
= dev_priv
->dev
;
458 struct intel_encoder
*encoder
;
460 if (WARN_ON(!IS_VALLEYVIEW(dev
)))
464 * We can't grab pps_mutex here due to deadlock with power_domain
465 * mutex when power_domain functions are called while holding pps_mutex.
466 * That also means that in order to use pps_pipe the code needs to
467 * hold both a power domain reference and pps_mutex, and the power domain
468 * reference get/put must be done while _not_ holding pps_mutex.
469 * pps_{lock,unlock}() do these steps in the correct order, so one
470 * should use them always.
473 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
, base
.head
) {
474 struct intel_dp
*intel_dp
;
476 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
479 intel_dp
= enc_to_intel_dp(&encoder
->base
);
480 intel_dp
->pps_pipe
= INVALID_PIPE
;
484 static u32
_pp_ctrl_reg(struct intel_dp
*intel_dp
)
486 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
488 if (HAS_PCH_SPLIT(dev
))
489 return PCH_PP_CONTROL
;
491 return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp
));
494 static u32
_pp_stat_reg(struct intel_dp
*intel_dp
)
496 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
498 if (HAS_PCH_SPLIT(dev
))
499 return PCH_PP_STATUS
;
501 return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp
));
504 /* Reboot notifier handler to shutdown panel power to guarantee T12 timing
505 This function only applicable when panel PM state is not to be tracked */
506 static int edp_notify_handler(struct notifier_block
*this, unsigned long code
,
509 struct intel_dp
*intel_dp
= container_of(this, typeof(* intel_dp
),
511 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
512 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
514 u32 pp_ctrl_reg
, pp_div_reg
;
516 if (!is_edp(intel_dp
) || code
!= SYS_RESTART
)
521 if (IS_VALLEYVIEW(dev
)) {
522 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
524 pp_ctrl_reg
= VLV_PIPE_PP_CONTROL(pipe
);
525 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
526 pp_div
= I915_READ(pp_div_reg
);
527 pp_div
&= PP_REFERENCE_DIVIDER_MASK
;
529 /* 0x1F write to PP_DIV_REG sets max cycle delay */
530 I915_WRITE(pp_div_reg
, pp_div
| 0x1F);
531 I915_WRITE(pp_ctrl_reg
, PANEL_UNLOCK_REGS
| PANEL_POWER_OFF
);
532 msleep(intel_dp
->panel_power_cycle_delay
);
535 pps_unlock(intel_dp
);
540 static bool edp_have_panel_power(struct intel_dp
*intel_dp
)
542 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
543 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
545 lockdep_assert_held(&dev_priv
->pps_mutex
);
547 return (I915_READ(_pp_stat_reg(intel_dp
)) & PP_ON
) != 0;
550 static bool edp_have_panel_vdd(struct intel_dp
*intel_dp
)
552 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
553 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
555 lockdep_assert_held(&dev_priv
->pps_mutex
);
557 return I915_READ(_pp_ctrl_reg(intel_dp
)) & EDP_FORCE_VDD
;
561 intel_dp_check_edp(struct intel_dp
*intel_dp
)
563 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
564 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
566 if (!is_edp(intel_dp
))
569 if (!edp_have_panel_power(intel_dp
) && !edp_have_panel_vdd(intel_dp
)) {
570 WARN(1, "eDP powered off while attempting aux channel communication.\n");
571 DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
572 I915_READ(_pp_stat_reg(intel_dp
)),
573 I915_READ(_pp_ctrl_reg(intel_dp
)));
578 intel_dp_aux_wait_done(struct intel_dp
*intel_dp
, bool has_aux_irq
)
580 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
581 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
582 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
583 uint32_t ch_ctl
= intel_dp
->aux_ch_ctl_reg
;
587 #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
589 done
= wait_event_timeout(dev_priv
->gmbus_wait_queue
, C
,
590 msecs_to_jiffies_timeout(10));
592 done
= wait_for_atomic(C
, 10) == 0;
594 DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
601 static uint32_t i9xx_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
603 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
604 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
607 * The clock divider is based off the hrawclk, and would like to run at
608 * 2MHz. So, take the hrawclk value and divide by 2 and use that
610 return index
? 0 : intel_hrawclk(dev
) / 2;
613 static uint32_t ilk_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
615 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
616 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
621 if (intel_dig_port
->port
== PORT_A
) {
622 if (IS_GEN6(dev
) || IS_GEN7(dev
))
623 return 200; /* SNB & IVB eDP input clock at 400Mhz */
625 return 225; /* eDP input clock at 450Mhz */
627 return DIV_ROUND_UP(intel_pch_rawclk(dev
), 2);
631 static uint32_t hsw_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
633 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
634 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
635 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
637 if (intel_dig_port
->port
== PORT_A
) {
640 return DIV_ROUND_CLOSEST(intel_ddi_get_cdclk_freq(dev_priv
), 2000);
641 } else if (dev_priv
->pch_id
== INTEL_PCH_LPT_DEVICE_ID_TYPE
) {
642 /* Workaround for non-ULT HSW */
649 return index
? 0 : DIV_ROUND_UP(intel_pch_rawclk(dev
), 2);
653 static uint32_t vlv_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
655 return index
? 0 : 100;
658 static uint32_t skl_get_aux_clock_divider(struct intel_dp
*intel_dp
, int index
)
661 * SKL doesn't need us to program the AUX clock divider (Hardware will
662 * derive the clock from CDCLK automatically). We still implement the
663 * get_aux_clock_divider vfunc to plug-in into the existing code.
665 return index
? 0 : 1;
668 static uint32_t i9xx_get_aux_send_ctl(struct intel_dp
*intel_dp
,
671 uint32_t aux_clock_divider
)
673 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
674 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
675 uint32_t precharge
, timeout
;
682 if (IS_BROADWELL(dev
) && intel_dp
->aux_ch_ctl_reg
== DPA_AUX_CH_CTL
)
683 timeout
= DP_AUX_CH_CTL_TIME_OUT_600us
;
685 timeout
= DP_AUX_CH_CTL_TIME_OUT_400us
;
687 return DP_AUX_CH_CTL_SEND_BUSY
|
689 (has_aux_irq
? DP_AUX_CH_CTL_INTERRUPT
: 0) |
690 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
692 DP_AUX_CH_CTL_RECEIVE_ERROR
|
693 (send_bytes
<< DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
) |
694 (precharge
<< DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT
) |
695 (aux_clock_divider
<< DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT
);
698 static uint32_t skl_get_aux_send_ctl(struct intel_dp
*intel_dp
,
703 return DP_AUX_CH_CTL_SEND_BUSY
|
705 (has_aux_irq
? DP_AUX_CH_CTL_INTERRUPT
: 0) |
706 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
707 DP_AUX_CH_CTL_TIME_OUT_1600us
|
708 DP_AUX_CH_CTL_RECEIVE_ERROR
|
709 (send_bytes
<< DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
) |
710 DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
714 intel_dp_aux_ch(struct intel_dp
*intel_dp
,
715 const uint8_t *send
, int send_bytes
,
716 uint8_t *recv
, int recv_size
)
718 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
719 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
720 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
721 uint32_t ch_ctl
= intel_dp
->aux_ch_ctl_reg
;
722 uint32_t ch_data
= ch_ctl
+ 4;
723 uint32_t aux_clock_divider
;
724 int i
, ret
, recv_bytes
;
727 bool has_aux_irq
= HAS_AUX_IRQ(dev
);
733 * We will be called with VDD already enabled for dpcd/edid/oui reads.
734 * In such cases we want to leave VDD enabled and it's up to upper layers
735 * to turn it off. But for eg. i2c-dev access we need to turn it on/off
738 vdd
= edp_panel_vdd_on(intel_dp
);
740 /* dp aux is extremely sensitive to irq latency, hence request the
741 * lowest possible wakeup latency and so prevent the cpu from going into
744 pm_qos_update_request(&dev_priv
->pm_qos
, 0);
746 intel_dp_check_edp(intel_dp
);
748 intel_aux_display_runtime_get(dev_priv
);
750 /* Try to wait for any previous AUX channel activity */
751 for (try = 0; try < 3; try++) {
752 status
= I915_READ_NOTRACE(ch_ctl
);
753 if ((status
& DP_AUX_CH_CTL_SEND_BUSY
) == 0)
759 WARN(1, "dp_aux_ch not started status 0x%08x\n",
765 /* Only 5 data registers! */
766 if (WARN_ON(send_bytes
> 20 || recv_size
> 20)) {
771 while ((aux_clock_divider
= intel_dp
->get_aux_clock_divider(intel_dp
, clock
++))) {
772 u32 send_ctl
= intel_dp
->get_aux_send_ctl(intel_dp
,
777 /* Must try at least 3 times according to DP spec */
778 for (try = 0; try < 5; try++) {
779 /* Load the send data into the aux channel data registers */
780 for (i
= 0; i
< send_bytes
; i
+= 4)
781 I915_WRITE(ch_data
+ i
,
782 pack_aux(send
+ i
, send_bytes
- i
));
784 /* Send the command and wait for it to complete */
785 I915_WRITE(ch_ctl
, send_ctl
);
787 status
= intel_dp_aux_wait_done(intel_dp
, has_aux_irq
);
789 /* Clear done status and any errors */
793 DP_AUX_CH_CTL_TIME_OUT_ERROR
|
794 DP_AUX_CH_CTL_RECEIVE_ERROR
);
796 if (status
& (DP_AUX_CH_CTL_TIME_OUT_ERROR
|
797 DP_AUX_CH_CTL_RECEIVE_ERROR
))
799 if (status
& DP_AUX_CH_CTL_DONE
)
802 if (status
& DP_AUX_CH_CTL_DONE
)
806 if ((status
& DP_AUX_CH_CTL_DONE
) == 0) {
807 DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status
);
812 /* Check for timeout or receive error.
813 * Timeouts occur when the sink is not connected
815 if (status
& DP_AUX_CH_CTL_RECEIVE_ERROR
) {
816 DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status
);
821 /* Timeouts occur when the device isn't connected, so they're
822 * "normal" -- don't fill the kernel log with these */
823 if (status
& DP_AUX_CH_CTL_TIME_OUT_ERROR
) {
824 DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status
);
829 /* Unload any bytes sent back from the other side */
830 recv_bytes
= ((status
& DP_AUX_CH_CTL_MESSAGE_SIZE_MASK
) >>
831 DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
);
832 if (recv_bytes
> recv_size
)
833 recv_bytes
= recv_size
;
835 for (i
= 0; i
< recv_bytes
; i
+= 4)
836 unpack_aux(I915_READ(ch_data
+ i
),
837 recv
+ i
, recv_bytes
- i
);
841 pm_qos_update_request(&dev_priv
->pm_qos
, PM_QOS_DEFAULT_VALUE
);
842 intel_aux_display_runtime_put(dev_priv
);
845 edp_panel_vdd_off(intel_dp
, false);
847 pps_unlock(intel_dp
);
852 #define BARE_ADDRESS_SIZE 3
853 #define HEADER_SIZE (BARE_ADDRESS_SIZE + 1)
855 intel_dp_aux_transfer(struct drm_dp_aux
*aux
, struct drm_dp_aux_msg
*msg
)
857 struct intel_dp
*intel_dp
= container_of(aux
, struct intel_dp
, aux
);
858 uint8_t txbuf
[20], rxbuf
[20];
859 size_t txsize
, rxsize
;
862 txbuf
[0] = msg
->request
<< 4;
863 txbuf
[1] = msg
->address
>> 8;
864 txbuf
[2] = msg
->address
& 0xff;
865 txbuf
[3] = msg
->size
- 1;
867 switch (msg
->request
& ~DP_AUX_I2C_MOT
) {
868 case DP_AUX_NATIVE_WRITE
:
869 case DP_AUX_I2C_WRITE
:
870 txsize
= msg
->size
? HEADER_SIZE
+ msg
->size
: BARE_ADDRESS_SIZE
;
873 if (WARN_ON(txsize
> 20))
876 memcpy(txbuf
+ HEADER_SIZE
, msg
->buffer
, msg
->size
);
878 ret
= intel_dp_aux_ch(intel_dp
, txbuf
, txsize
, rxbuf
, rxsize
);
880 msg
->reply
= rxbuf
[0] >> 4;
882 /* Return payload size. */
887 case DP_AUX_NATIVE_READ
:
888 case DP_AUX_I2C_READ
:
889 txsize
= msg
->size
? HEADER_SIZE
: BARE_ADDRESS_SIZE
;
890 rxsize
= msg
->size
+ 1;
892 if (WARN_ON(rxsize
> 20))
895 ret
= intel_dp_aux_ch(intel_dp
, txbuf
, txsize
, rxbuf
, rxsize
);
897 msg
->reply
= rxbuf
[0] >> 4;
899 * Assume happy day, and copy the data. The caller is
900 * expected to check msg->reply before touching it.
902 * Return payload size.
905 memcpy(msg
->buffer
, rxbuf
+ 1, ret
);
918 intel_dp_aux_init(struct intel_dp
*intel_dp
, struct intel_connector
*connector
)
920 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
921 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
922 enum port port
= intel_dig_port
->port
;
923 const char *name
= NULL
;
928 intel_dp
->aux_ch_ctl_reg
= DPA_AUX_CH_CTL
;
932 intel_dp
->aux_ch_ctl_reg
= PCH_DPB_AUX_CH_CTL
;
936 intel_dp
->aux_ch_ctl_reg
= PCH_DPC_AUX_CH_CTL
;
940 intel_dp
->aux_ch_ctl_reg
= PCH_DPD_AUX_CH_CTL
;
948 * The AUX_CTL register is usually DP_CTL + 0x10.
950 * On Haswell and Broadwell though:
951 * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
952 * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
954 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
956 if (!IS_HASWELL(dev
) && !IS_BROADWELL(dev
))
957 intel_dp
->aux_ch_ctl_reg
= intel_dp
->output_reg
+ 0x10;
959 intel_dp
->aux
.name
= name
;
960 intel_dp
->aux
.dev
= dev
->dev
;
961 intel_dp
->aux
.transfer
= intel_dp_aux_transfer
;
963 DRM_DEBUG_KMS("registering %s bus for %s\n", name
,
964 connector
->base
.kdev
->kobj
.name
);
966 ret
= drm_dp_aux_register(&intel_dp
->aux
);
968 DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
973 ret
= sysfs_create_link(&connector
->base
.kdev
->kobj
,
974 &intel_dp
->aux
.ddc
.dev
.kobj
,
975 intel_dp
->aux
.ddc
.dev
.kobj
.name
);
977 DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name
, ret
);
978 drm_dp_aux_unregister(&intel_dp
->aux
);
983 intel_dp_connector_unregister(struct intel_connector
*intel_connector
)
985 struct intel_dp
*intel_dp
= intel_attached_dp(&intel_connector
->base
);
987 if (!intel_connector
->mst_port
)
988 sysfs_remove_link(&intel_connector
->base
.kdev
->kobj
,
989 intel_dp
->aux
.ddc
.dev
.kobj
.name
);
990 intel_connector_unregister(intel_connector
);
994 hsw_dp_set_ddi_pll_sel(struct intel_crtc_config
*pipe_config
, int link_bw
)
997 case DP_LINK_BW_1_62
:
998 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_810
;
1000 case DP_LINK_BW_2_7
:
1001 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_1350
;
1003 case DP_LINK_BW_5_4
:
1004 pipe_config
->ddi_pll_sel
= PORT_CLK_SEL_LCPLL_2700
;
1010 intel_dp_set_clock(struct intel_encoder
*encoder
,
1011 struct intel_crtc_config
*pipe_config
, int link_bw
)
1013 struct drm_device
*dev
= encoder
->base
.dev
;
1014 const struct dp_link_dpll
*divisor
= NULL
;
1018 divisor
= gen4_dpll
;
1019 count
= ARRAY_SIZE(gen4_dpll
);
1020 } else if (HAS_PCH_SPLIT(dev
)) {
1022 count
= ARRAY_SIZE(pch_dpll
);
1023 } else if (IS_CHERRYVIEW(dev
)) {
1025 count
= ARRAY_SIZE(chv_dpll
);
1026 } else if (IS_VALLEYVIEW(dev
)) {
1028 count
= ARRAY_SIZE(vlv_dpll
);
1031 if (divisor
&& count
) {
1032 for (i
= 0; i
< count
; i
++) {
1033 if (link_bw
== divisor
[i
].link_bw
) {
1034 pipe_config
->dpll
= divisor
[i
].dpll
;
1035 pipe_config
->clock_set
= true;
1043 intel_dp_compute_config(struct intel_encoder
*encoder
,
1044 struct intel_crtc_config
*pipe_config
)
1046 struct drm_device
*dev
= encoder
->base
.dev
;
1047 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1048 struct drm_display_mode
*adjusted_mode
= &pipe_config
->adjusted_mode
;
1049 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1050 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1051 struct intel_crtc
*intel_crtc
= encoder
->new_crtc
;
1052 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
1053 int lane_count
, clock
;
1054 int min_lane_count
= 1;
1055 int max_lane_count
= intel_dp_max_lane_count(intel_dp
);
1056 /* Conveniently, the link BW constants become indices with a shift...*/
1058 int max_clock
= intel_dp_max_link_bw(intel_dp
) >> 3;
1060 static int bws
[] = { DP_LINK_BW_1_62
, DP_LINK_BW_2_7
, DP_LINK_BW_5_4
};
1061 int link_avail
, link_clock
;
1063 if (HAS_PCH_SPLIT(dev
) && !HAS_DDI(dev
) && port
!= PORT_A
)
1064 pipe_config
->has_pch_encoder
= true;
1066 pipe_config
->has_dp_encoder
= true;
1067 pipe_config
->has_drrs
= false;
1068 pipe_config
->has_audio
= intel_dp
->has_audio
;
1070 if (is_edp(intel_dp
) && intel_connector
->panel
.fixed_mode
) {
1071 intel_fixed_panel_mode(intel_connector
->panel
.fixed_mode
,
1073 if (!HAS_PCH_SPLIT(dev
))
1074 intel_gmch_panel_fitting(intel_crtc
, pipe_config
,
1075 intel_connector
->panel
.fitting_mode
);
1077 intel_pch_panel_fitting(intel_crtc
, pipe_config
,
1078 intel_connector
->panel
.fitting_mode
);
1081 if (adjusted_mode
->flags
& DRM_MODE_FLAG_DBLCLK
)
1084 DRM_DEBUG_KMS("DP link computation with max lane count %i "
1085 "max bw %02x pixel clock %iKHz\n",
1086 max_lane_count
, bws
[max_clock
],
1087 adjusted_mode
->crtc_clock
);
1089 /* Walk through all bpp values. Luckily they're all nicely spaced with 2
1090 * bpc in between. */
1091 bpp
= pipe_config
->pipe_bpp
;
1092 if (is_edp(intel_dp
)) {
1093 if (dev_priv
->vbt
.edp_bpp
&& dev_priv
->vbt
.edp_bpp
< bpp
) {
1094 DRM_DEBUG_KMS("clamping bpp for eDP panel to BIOS-provided %i\n",
1095 dev_priv
->vbt
.edp_bpp
);
1096 bpp
= dev_priv
->vbt
.edp_bpp
;
1100 * Use the maximum clock and number of lanes the eDP panel
1101 * advertizes being capable of. The panels are generally
1102 * designed to support only a single clock and lane
1103 * configuration, and typically these values correspond to the
1104 * native resolution of the panel.
1106 min_lane_count
= max_lane_count
;
1107 min_clock
= max_clock
;
1110 for (; bpp
>= 6*3; bpp
-= 2*3) {
1111 mode_rate
= intel_dp_link_required(adjusted_mode
->crtc_clock
,
1114 for (clock
= min_clock
; clock
<= max_clock
; clock
++) {
1115 for (lane_count
= min_lane_count
; lane_count
<= max_lane_count
; lane_count
<<= 1) {
1116 link_clock
= drm_dp_bw_code_to_link_rate(bws
[clock
]);
1117 link_avail
= intel_dp_max_data_rate(link_clock
,
1120 if (mode_rate
<= link_avail
) {
1130 if (intel_dp
->color_range_auto
) {
1133 * CEA-861-E - 5.1 Default Encoding Parameters
1134 * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
1136 if (bpp
!= 18 && drm_match_cea_mode(adjusted_mode
) > 1)
1137 intel_dp
->color_range
= DP_COLOR_RANGE_16_235
;
1139 intel_dp
->color_range
= 0;
1142 if (intel_dp
->color_range
)
1143 pipe_config
->limited_color_range
= true;
1145 intel_dp
->link_bw
= bws
[clock
];
1146 intel_dp
->lane_count
= lane_count
;
1147 pipe_config
->pipe_bpp
= bpp
;
1148 pipe_config
->port_clock
= drm_dp_bw_code_to_link_rate(intel_dp
->link_bw
);
1150 DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
1151 intel_dp
->link_bw
, intel_dp
->lane_count
,
1152 pipe_config
->port_clock
, bpp
);
1153 DRM_DEBUG_KMS("DP link bw required %i available %i\n",
1154 mode_rate
, link_avail
);
1156 intel_link_compute_m_n(bpp
, lane_count
,
1157 adjusted_mode
->crtc_clock
,
1158 pipe_config
->port_clock
,
1159 &pipe_config
->dp_m_n
);
1161 if (intel_connector
->panel
.downclock_mode
!= NULL
&&
1162 intel_dp
->drrs_state
.type
== SEAMLESS_DRRS_SUPPORT
) {
1163 pipe_config
->has_drrs
= true;
1164 intel_link_compute_m_n(bpp
, lane_count
,
1165 intel_connector
->panel
.downclock_mode
->clock
,
1166 pipe_config
->port_clock
,
1167 &pipe_config
->dp_m2_n2
);
1170 if (IS_HASWELL(dev
) || IS_BROADWELL(dev
))
1171 hsw_dp_set_ddi_pll_sel(pipe_config
, intel_dp
->link_bw
);
1173 intel_dp_set_clock(encoder
, pipe_config
, intel_dp
->link_bw
);
1178 static void ironlake_set_pll_cpu_edp(struct intel_dp
*intel_dp
)
1180 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
1181 struct intel_crtc
*crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
1182 struct drm_device
*dev
= crtc
->base
.dev
;
1183 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1186 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", crtc
->config
.port_clock
);
1187 dpa_ctl
= I915_READ(DP_A
);
1188 dpa_ctl
&= ~DP_PLL_FREQ_MASK
;
1190 if (crtc
->config
.port_clock
== 162000) {
1191 /* For a long time we've carried around a ILK-DevA w/a for the
1192 * 160MHz clock. If we're really unlucky, it's still required.
1194 DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
1195 dpa_ctl
|= DP_PLL_FREQ_160MHZ
;
1196 intel_dp
->DP
|= DP_PLL_FREQ_160MHZ
;
1198 dpa_ctl
|= DP_PLL_FREQ_270MHZ
;
1199 intel_dp
->DP
|= DP_PLL_FREQ_270MHZ
;
1202 I915_WRITE(DP_A
, dpa_ctl
);
1208 static void intel_dp_prepare(struct intel_encoder
*encoder
)
1210 struct drm_device
*dev
= encoder
->base
.dev
;
1211 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1212 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1213 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1214 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
1215 struct drm_display_mode
*adjusted_mode
= &crtc
->config
.adjusted_mode
;
1218 * There are four kinds of DP registers:
1225 * IBX PCH and CPU are the same for almost everything,
1226 * except that the CPU DP PLL is configured in this
1229 * CPT PCH is quite different, having many bits moved
1230 * to the TRANS_DP_CTL register instead. That
1231 * configuration happens (oddly) in ironlake_pch_enable
1234 /* Preserve the BIOS-computed detected bit. This is
1235 * supposed to be read-only.
1237 intel_dp
->DP
= I915_READ(intel_dp
->output_reg
) & DP_DETECTED
;
1239 /* Handle DP bits in common between all three register formats */
1240 intel_dp
->DP
|= DP_VOLTAGE_0_4
| DP_PRE_EMPHASIS_0
;
1241 intel_dp
->DP
|= DP_PORT_WIDTH(intel_dp
->lane_count
);
1243 if (crtc
->config
.has_audio
) {
1244 DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
1245 pipe_name(crtc
->pipe
));
1246 intel_dp
->DP
|= DP_AUDIO_OUTPUT_ENABLE
;
1247 intel_write_eld(encoder
);
1250 /* Split out the IBX/CPU vs CPT settings */
1252 if (port
== PORT_A
&& IS_GEN7(dev
) && !IS_VALLEYVIEW(dev
)) {
1253 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PHSYNC
)
1254 intel_dp
->DP
|= DP_SYNC_HS_HIGH
;
1255 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PVSYNC
)
1256 intel_dp
->DP
|= DP_SYNC_VS_HIGH
;
1257 intel_dp
->DP
|= DP_LINK_TRAIN_OFF_CPT
;
1259 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
1260 intel_dp
->DP
|= DP_ENHANCED_FRAMING
;
1262 intel_dp
->DP
|= crtc
->pipe
<< 29;
1263 } else if (!HAS_PCH_CPT(dev
) || port
== PORT_A
) {
1264 if (!HAS_PCH_SPLIT(dev
) && !IS_VALLEYVIEW(dev
))
1265 intel_dp
->DP
|= intel_dp
->color_range
;
1267 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PHSYNC
)
1268 intel_dp
->DP
|= DP_SYNC_HS_HIGH
;
1269 if (adjusted_mode
->flags
& DRM_MODE_FLAG_PVSYNC
)
1270 intel_dp
->DP
|= DP_SYNC_VS_HIGH
;
1271 intel_dp
->DP
|= DP_LINK_TRAIN_OFF
;
1273 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
1274 intel_dp
->DP
|= DP_ENHANCED_FRAMING
;
1276 if (!IS_CHERRYVIEW(dev
)) {
1277 if (crtc
->pipe
== 1)
1278 intel_dp
->DP
|= DP_PIPEB_SELECT
;
1280 intel_dp
->DP
|= DP_PIPE_SELECT_CHV(crtc
->pipe
);
1283 intel_dp
->DP
|= DP_LINK_TRAIN_OFF_CPT
;
1287 #define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
1288 #define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
1290 #define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0)
1291 #define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0)
1293 #define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK)
1294 #define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE)
1296 static void wait_panel_status(struct intel_dp
*intel_dp
,
1300 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1301 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1302 u32 pp_stat_reg
, pp_ctrl_reg
;
1304 lockdep_assert_held(&dev_priv
->pps_mutex
);
1306 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1307 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1309 DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
1311 I915_READ(pp_stat_reg
),
1312 I915_READ(pp_ctrl_reg
));
1314 if (_wait_for((I915_READ(pp_stat_reg
) & mask
) == value
, 5000, 10)) {
1315 DRM_ERROR("Panel status timeout: status %08x control %08x\n",
1316 I915_READ(pp_stat_reg
),
1317 I915_READ(pp_ctrl_reg
));
1320 DRM_DEBUG_KMS("Wait complete\n");
1323 static void wait_panel_on(struct intel_dp
*intel_dp
)
1325 DRM_DEBUG_KMS("Wait for panel power on\n");
1326 wait_panel_status(intel_dp
, IDLE_ON_MASK
, IDLE_ON_VALUE
);
1329 static void wait_panel_off(struct intel_dp
*intel_dp
)
1331 DRM_DEBUG_KMS("Wait for panel power off time\n");
1332 wait_panel_status(intel_dp
, IDLE_OFF_MASK
, IDLE_OFF_VALUE
);
1335 static void wait_panel_power_cycle(struct intel_dp
*intel_dp
)
1337 DRM_DEBUG_KMS("Wait for panel power cycle\n");
1339 /* When we disable the VDD override bit last we have to do the manual
1341 wait_remaining_ms_from_jiffies(intel_dp
->last_power_cycle
,
1342 intel_dp
->panel_power_cycle_delay
);
1344 wait_panel_status(intel_dp
, IDLE_CYCLE_MASK
, IDLE_CYCLE_VALUE
);
1347 static void wait_backlight_on(struct intel_dp
*intel_dp
)
1349 wait_remaining_ms_from_jiffies(intel_dp
->last_power_on
,
1350 intel_dp
->backlight_on_delay
);
1353 static void edp_wait_backlight_off(struct intel_dp
*intel_dp
)
1355 wait_remaining_ms_from_jiffies(intel_dp
->last_backlight_off
,
1356 intel_dp
->backlight_off_delay
);
1359 /* Read the current pp_control value, unlocking the register if it
1363 static u32
ironlake_get_pp_control(struct intel_dp
*intel_dp
)
1365 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1366 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1369 lockdep_assert_held(&dev_priv
->pps_mutex
);
1371 control
= I915_READ(_pp_ctrl_reg(intel_dp
));
1372 control
&= ~PANEL_UNLOCK_MASK
;
1373 control
|= PANEL_UNLOCK_REGS
;
1378 * Must be paired with edp_panel_vdd_off().
1379 * Must hold pps_mutex around the whole on/off sequence.
1380 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1382 static bool edp_panel_vdd_on(struct intel_dp
*intel_dp
)
1384 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1385 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1386 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1387 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1388 enum intel_display_power_domain power_domain
;
1390 u32 pp_stat_reg
, pp_ctrl_reg
;
1391 bool need_to_disable
= !intel_dp
->want_panel_vdd
;
1393 lockdep_assert_held(&dev_priv
->pps_mutex
);
1395 if (!is_edp(intel_dp
))
1398 intel_dp
->want_panel_vdd
= true;
1400 if (edp_have_panel_vdd(intel_dp
))
1401 return need_to_disable
;
1403 power_domain
= intel_display_port_power_domain(intel_encoder
);
1404 intel_display_power_get(dev_priv
, power_domain
);
1406 DRM_DEBUG_KMS("Turning eDP VDD on\n");
1408 if (!edp_have_panel_power(intel_dp
))
1409 wait_panel_power_cycle(intel_dp
);
1411 pp
= ironlake_get_pp_control(intel_dp
);
1412 pp
|= EDP_FORCE_VDD
;
1414 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1415 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1417 I915_WRITE(pp_ctrl_reg
, pp
);
1418 POSTING_READ(pp_ctrl_reg
);
1419 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1420 I915_READ(pp_stat_reg
), I915_READ(pp_ctrl_reg
));
1422 * If the panel wasn't on, delay before accessing aux channel
1424 if (!edp_have_panel_power(intel_dp
)) {
1425 DRM_DEBUG_KMS("eDP was not running\n");
1426 msleep(intel_dp
->panel_power_up_delay
);
1429 return need_to_disable
;
1433 * Must be paired with intel_edp_panel_vdd_off() or
1434 * intel_edp_panel_off().
1435 * Nested calls to these functions are not allowed since
1436 * we drop the lock. Caller must use some higher level
1437 * locking to prevent nested calls from other threads.
1439 void intel_edp_panel_vdd_on(struct intel_dp
*intel_dp
)
1443 if (!is_edp(intel_dp
))
1447 vdd
= edp_panel_vdd_on(intel_dp
);
1448 pps_unlock(intel_dp
);
1450 WARN(!vdd
, "eDP VDD already requested on\n");
1453 static void edp_panel_vdd_off_sync(struct intel_dp
*intel_dp
)
1455 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1456 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1457 struct intel_digital_port
*intel_dig_port
=
1458 dp_to_dig_port(intel_dp
);
1459 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1460 enum intel_display_power_domain power_domain
;
1462 u32 pp_stat_reg
, pp_ctrl_reg
;
1464 lockdep_assert_held(&dev_priv
->pps_mutex
);
1466 WARN_ON(intel_dp
->want_panel_vdd
);
1468 if (!edp_have_panel_vdd(intel_dp
))
1471 DRM_DEBUG_KMS("Turning eDP VDD off\n");
1473 pp
= ironlake_get_pp_control(intel_dp
);
1474 pp
&= ~EDP_FORCE_VDD
;
1476 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1477 pp_stat_reg
= _pp_stat_reg(intel_dp
);
1479 I915_WRITE(pp_ctrl_reg
, pp
);
1480 POSTING_READ(pp_ctrl_reg
);
1482 /* Make sure sequencer is idle before allowing subsequent activity */
1483 DRM_DEBUG_KMS("PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n",
1484 I915_READ(pp_stat_reg
), I915_READ(pp_ctrl_reg
));
1486 if ((pp
& POWER_TARGET_ON
) == 0)
1487 intel_dp
->last_power_cycle
= jiffies
;
1489 power_domain
= intel_display_port_power_domain(intel_encoder
);
1490 intel_display_power_put(dev_priv
, power_domain
);
1493 static void edp_panel_vdd_work(struct work_struct
*__work
)
1495 struct intel_dp
*intel_dp
= container_of(to_delayed_work(__work
),
1496 struct intel_dp
, panel_vdd_work
);
1499 if (!intel_dp
->want_panel_vdd
)
1500 edp_panel_vdd_off_sync(intel_dp
);
1501 pps_unlock(intel_dp
);
1504 static void edp_panel_vdd_schedule_off(struct intel_dp
*intel_dp
)
1506 unsigned long delay
;
1509 * Queue the timer to fire a long time from now (relative to the power
1510 * down delay) to keep the panel power up across a sequence of
1513 delay
= msecs_to_jiffies(intel_dp
->panel_power_cycle_delay
* 5);
1514 schedule_delayed_work(&intel_dp
->panel_vdd_work
, delay
);
1518 * Must be paired with edp_panel_vdd_on().
1519 * Must hold pps_mutex around the whole on/off sequence.
1520 * Can be nested with intel_edp_panel_vdd_{on,off}() calls.
1522 static void edp_panel_vdd_off(struct intel_dp
*intel_dp
, bool sync
)
1524 struct drm_i915_private
*dev_priv
=
1525 intel_dp_to_dev(intel_dp
)->dev_private
;
1527 lockdep_assert_held(&dev_priv
->pps_mutex
);
1529 if (!is_edp(intel_dp
))
1532 WARN(!intel_dp
->want_panel_vdd
, "eDP VDD not forced on");
1534 intel_dp
->want_panel_vdd
= false;
1537 edp_panel_vdd_off_sync(intel_dp
);
1539 edp_panel_vdd_schedule_off(intel_dp
);
1543 * Must be paired with intel_edp_panel_vdd_on().
1544 * Nested calls to these functions are not allowed since
1545 * we drop the lock. Caller must use some higher level
1546 * locking to prevent nested calls from other threads.
1548 static void intel_edp_panel_vdd_off(struct intel_dp
*intel_dp
, bool sync
)
1550 if (!is_edp(intel_dp
))
1554 edp_panel_vdd_off(intel_dp
, sync
);
1555 pps_unlock(intel_dp
);
1558 void intel_edp_panel_on(struct intel_dp
*intel_dp
)
1560 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1561 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1565 if (!is_edp(intel_dp
))
1568 DRM_DEBUG_KMS("Turn eDP power on\n");
1572 if (edp_have_panel_power(intel_dp
)) {
1573 DRM_DEBUG_KMS("eDP power already on\n");
1577 wait_panel_power_cycle(intel_dp
);
1579 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1580 pp
= ironlake_get_pp_control(intel_dp
);
1582 /* ILK workaround: disable reset around power sequence */
1583 pp
&= ~PANEL_POWER_RESET
;
1584 I915_WRITE(pp_ctrl_reg
, pp
);
1585 POSTING_READ(pp_ctrl_reg
);
1588 pp
|= POWER_TARGET_ON
;
1590 pp
|= PANEL_POWER_RESET
;
1592 I915_WRITE(pp_ctrl_reg
, pp
);
1593 POSTING_READ(pp_ctrl_reg
);
1595 wait_panel_on(intel_dp
);
1596 intel_dp
->last_power_on
= jiffies
;
1599 pp
|= PANEL_POWER_RESET
; /* restore panel reset bit */
1600 I915_WRITE(pp_ctrl_reg
, pp
);
1601 POSTING_READ(pp_ctrl_reg
);
1605 pps_unlock(intel_dp
);
1608 void intel_edp_panel_off(struct intel_dp
*intel_dp
)
1610 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1611 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
1612 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1613 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1614 enum intel_display_power_domain power_domain
;
1618 if (!is_edp(intel_dp
))
1621 DRM_DEBUG_KMS("Turn eDP power off\n");
1625 WARN(!intel_dp
->want_panel_vdd
, "Need VDD to turn off panel\n");
1627 pp
= ironlake_get_pp_control(intel_dp
);
1628 /* We need to switch off panel power _and_ force vdd, for otherwise some
1629 * panels get very unhappy and cease to work. */
1630 pp
&= ~(POWER_TARGET_ON
| PANEL_POWER_RESET
| EDP_FORCE_VDD
|
1633 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1635 intel_dp
->want_panel_vdd
= false;
1637 I915_WRITE(pp_ctrl_reg
, pp
);
1638 POSTING_READ(pp_ctrl_reg
);
1640 intel_dp
->last_power_cycle
= jiffies
;
1641 wait_panel_off(intel_dp
);
1643 /* We got a reference when we enabled the VDD. */
1644 power_domain
= intel_display_port_power_domain(intel_encoder
);
1645 intel_display_power_put(dev_priv
, power_domain
);
1647 pps_unlock(intel_dp
);
1650 /* Enable backlight in the panel power control. */
1651 static void _intel_edp_backlight_on(struct intel_dp
*intel_dp
)
1653 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1654 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
1655 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1660 * If we enable the backlight right away following a panel power
1661 * on, we may see slight flicker as the panel syncs with the eDP
1662 * link. So delay a bit to make sure the image is solid before
1663 * allowing it to appear.
1665 wait_backlight_on(intel_dp
);
1669 pp
= ironlake_get_pp_control(intel_dp
);
1670 pp
|= EDP_BLC_ENABLE
;
1672 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1674 I915_WRITE(pp_ctrl_reg
, pp
);
1675 POSTING_READ(pp_ctrl_reg
);
1677 pps_unlock(intel_dp
);
1680 /* Enable backlight PWM and backlight PP control. */
1681 void intel_edp_backlight_on(struct intel_dp
*intel_dp
)
1683 if (!is_edp(intel_dp
))
1686 DRM_DEBUG_KMS("\n");
1688 intel_panel_enable_backlight(intel_dp
->attached_connector
);
1689 _intel_edp_backlight_on(intel_dp
);
1692 /* Disable backlight in the panel power control. */
1693 static void _intel_edp_backlight_off(struct intel_dp
*intel_dp
)
1695 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
1696 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1700 if (!is_edp(intel_dp
))
1705 pp
= ironlake_get_pp_control(intel_dp
);
1706 pp
&= ~EDP_BLC_ENABLE
;
1708 pp_ctrl_reg
= _pp_ctrl_reg(intel_dp
);
1710 I915_WRITE(pp_ctrl_reg
, pp
);
1711 POSTING_READ(pp_ctrl_reg
);
1713 pps_unlock(intel_dp
);
1715 intel_dp
->last_backlight_off
= jiffies
;
1716 edp_wait_backlight_off(intel_dp
);
1719 /* Disable backlight PP control and backlight PWM. */
1720 void intel_edp_backlight_off(struct intel_dp
*intel_dp
)
1722 if (!is_edp(intel_dp
))
1725 DRM_DEBUG_KMS("\n");
1727 _intel_edp_backlight_off(intel_dp
);
1728 intel_panel_disable_backlight(intel_dp
->attached_connector
);
1732 * Hook for controlling the panel power control backlight through the bl_power
1733 * sysfs attribute. Take care to handle multiple calls.
1735 static void intel_edp_backlight_power(struct intel_connector
*connector
,
1738 struct intel_dp
*intel_dp
= intel_attached_dp(&connector
->base
);
1742 is_enabled
= ironlake_get_pp_control(intel_dp
) & EDP_BLC_ENABLE
;
1743 pps_unlock(intel_dp
);
1745 if (is_enabled
== enable
)
1748 DRM_DEBUG_KMS("panel power control backlight %s\n",
1749 enable
? "enable" : "disable");
1752 _intel_edp_backlight_on(intel_dp
);
1754 _intel_edp_backlight_off(intel_dp
);
1757 static void ironlake_edp_pll_on(struct intel_dp
*intel_dp
)
1759 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1760 struct drm_crtc
*crtc
= intel_dig_port
->base
.base
.crtc
;
1761 struct drm_device
*dev
= crtc
->dev
;
1762 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1765 assert_pipe_disabled(dev_priv
,
1766 to_intel_crtc(crtc
)->pipe
);
1768 DRM_DEBUG_KMS("\n");
1769 dpa_ctl
= I915_READ(DP_A
);
1770 WARN(dpa_ctl
& DP_PLL_ENABLE
, "dp pll on, should be off\n");
1771 WARN(dpa_ctl
& DP_PORT_EN
, "dp port still on, should be off\n");
1773 /* We don't adjust intel_dp->DP while tearing down the link, to
1774 * facilitate link retraining (e.g. after hotplug). Hence clear all
1775 * enable bits here to ensure that we don't enable too much. */
1776 intel_dp
->DP
&= ~(DP_PORT_EN
| DP_AUDIO_OUTPUT_ENABLE
);
1777 intel_dp
->DP
|= DP_PLL_ENABLE
;
1778 I915_WRITE(DP_A
, intel_dp
->DP
);
1783 static void ironlake_edp_pll_off(struct intel_dp
*intel_dp
)
1785 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
1786 struct drm_crtc
*crtc
= intel_dig_port
->base
.base
.crtc
;
1787 struct drm_device
*dev
= crtc
->dev
;
1788 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1791 assert_pipe_disabled(dev_priv
,
1792 to_intel_crtc(crtc
)->pipe
);
1794 dpa_ctl
= I915_READ(DP_A
);
1795 WARN((dpa_ctl
& DP_PLL_ENABLE
) == 0,
1796 "dp pll off, should be on\n");
1797 WARN(dpa_ctl
& DP_PORT_EN
, "dp port still on, should be off\n");
1799 /* We can't rely on the value tracked for the DP register in
1800 * intel_dp->DP because link_down must not change that (otherwise link
1801 * re-training will fail. */
1802 dpa_ctl
&= ~DP_PLL_ENABLE
;
1803 I915_WRITE(DP_A
, dpa_ctl
);
1808 /* If the sink supports it, try to set the power state appropriately */
1809 void intel_dp_sink_dpms(struct intel_dp
*intel_dp
, int mode
)
1813 /* Should have a valid DPCD by this point */
1814 if (intel_dp
->dpcd
[DP_DPCD_REV
] < 0x11)
1817 if (mode
!= DRM_MODE_DPMS_ON
) {
1818 ret
= drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_SET_POWER
,
1822 * When turning on, we need to retry for 1ms to give the sink
1825 for (i
= 0; i
< 3; i
++) {
1826 ret
= drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_SET_POWER
,
1835 DRM_DEBUG_KMS("failed to %s sink power state\n",
1836 mode
== DRM_MODE_DPMS_ON
? "enable" : "disable");
1839 static bool intel_dp_get_hw_state(struct intel_encoder
*encoder
,
1842 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1843 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1844 struct drm_device
*dev
= encoder
->base
.dev
;
1845 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1846 enum intel_display_power_domain power_domain
;
1849 power_domain
= intel_display_port_power_domain(encoder
);
1850 if (!intel_display_power_is_enabled(dev_priv
, power_domain
))
1853 tmp
= I915_READ(intel_dp
->output_reg
);
1855 if (!(tmp
& DP_PORT_EN
))
1858 if (port
== PORT_A
&& IS_GEN7(dev
) && !IS_VALLEYVIEW(dev
)) {
1859 *pipe
= PORT_TO_PIPE_CPT(tmp
);
1860 } else if (IS_CHERRYVIEW(dev
)) {
1861 *pipe
= DP_PORT_TO_PIPE_CHV(tmp
);
1862 } else if (!HAS_PCH_CPT(dev
) || port
== PORT_A
) {
1863 *pipe
= PORT_TO_PIPE(tmp
);
1869 switch (intel_dp
->output_reg
) {
1871 trans_sel
= TRANS_DP_PORT_SEL_B
;
1874 trans_sel
= TRANS_DP_PORT_SEL_C
;
1877 trans_sel
= TRANS_DP_PORT_SEL_D
;
1883 for_each_pipe(dev_priv
, i
) {
1884 trans_dp
= I915_READ(TRANS_DP_CTL(i
));
1885 if ((trans_dp
& TRANS_DP_PORT_SEL_MASK
) == trans_sel
) {
1891 DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n",
1892 intel_dp
->output_reg
);
1898 static void intel_dp_get_config(struct intel_encoder
*encoder
,
1899 struct intel_crtc_config
*pipe_config
)
1901 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
1903 struct drm_device
*dev
= encoder
->base
.dev
;
1904 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1905 enum port port
= dp_to_dig_port(intel_dp
)->port
;
1906 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
1909 tmp
= I915_READ(intel_dp
->output_reg
);
1910 if (tmp
& DP_AUDIO_OUTPUT_ENABLE
)
1911 pipe_config
->has_audio
= true;
1913 if ((port
== PORT_A
) || !HAS_PCH_CPT(dev
)) {
1914 if (tmp
& DP_SYNC_HS_HIGH
)
1915 flags
|= DRM_MODE_FLAG_PHSYNC
;
1917 flags
|= DRM_MODE_FLAG_NHSYNC
;
1919 if (tmp
& DP_SYNC_VS_HIGH
)
1920 flags
|= DRM_MODE_FLAG_PVSYNC
;
1922 flags
|= DRM_MODE_FLAG_NVSYNC
;
1924 tmp
= I915_READ(TRANS_DP_CTL(crtc
->pipe
));
1925 if (tmp
& TRANS_DP_HSYNC_ACTIVE_HIGH
)
1926 flags
|= DRM_MODE_FLAG_PHSYNC
;
1928 flags
|= DRM_MODE_FLAG_NHSYNC
;
1930 if (tmp
& TRANS_DP_VSYNC_ACTIVE_HIGH
)
1931 flags
|= DRM_MODE_FLAG_PVSYNC
;
1933 flags
|= DRM_MODE_FLAG_NVSYNC
;
1936 pipe_config
->adjusted_mode
.flags
|= flags
;
1938 if (!HAS_PCH_SPLIT(dev
) && !IS_VALLEYVIEW(dev
) &&
1939 tmp
& DP_COLOR_RANGE_16_235
)
1940 pipe_config
->limited_color_range
= true;
1942 pipe_config
->has_dp_encoder
= true;
1944 intel_dp_get_m_n(crtc
, pipe_config
);
1946 if (port
== PORT_A
) {
1947 if ((I915_READ(DP_A
) & DP_PLL_FREQ_MASK
) == DP_PLL_FREQ_160MHZ
)
1948 pipe_config
->port_clock
= 162000;
1950 pipe_config
->port_clock
= 270000;
1953 dotclock
= intel_dotclock_calculate(pipe_config
->port_clock
,
1954 &pipe_config
->dp_m_n
);
1956 if (HAS_PCH_SPLIT(dev_priv
->dev
) && port
!= PORT_A
)
1957 ironlake_check_encoder_dotclock(pipe_config
, dotclock
);
1959 pipe_config
->adjusted_mode
.crtc_clock
= dotclock
;
1961 if (is_edp(intel_dp
) && dev_priv
->vbt
.edp_bpp
&&
1962 pipe_config
->pipe_bpp
> dev_priv
->vbt
.edp_bpp
) {
1964 * This is a big fat ugly hack.
1966 * Some machines in UEFI boot mode provide us a VBT that has 18
1967 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
1968 * unknown we fail to light up. Yet the same BIOS boots up with
1969 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
1970 * max, not what it tells us to use.
1972 * Note: This will still be broken if the eDP panel is not lit
1973 * up by the BIOS, and thus we can't get the mode at module
1976 DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
1977 pipe_config
->pipe_bpp
, dev_priv
->vbt
.edp_bpp
);
1978 dev_priv
->vbt
.edp_bpp
= pipe_config
->pipe_bpp
;
1982 static bool is_edp_psr(struct intel_dp
*intel_dp
)
1984 return intel_dp
->psr_dpcd
[0] & DP_PSR_IS_SUPPORTED
;
1987 static bool intel_edp_is_psr_enabled(struct drm_device
*dev
)
1989 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
1994 return I915_READ(EDP_PSR_CTL(dev
)) & EDP_PSR_ENABLE
;
1997 static void intel_edp_psr_write_vsc(struct intel_dp
*intel_dp
,
1998 struct edp_vsc_psr
*vsc_psr
)
2000 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
2001 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
2002 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2003 struct intel_crtc
*crtc
= to_intel_crtc(dig_port
->base
.base
.crtc
);
2004 u32 ctl_reg
= HSW_TVIDEO_DIP_CTL(crtc
->config
.cpu_transcoder
);
2005 u32 data_reg
= HSW_TVIDEO_DIP_VSC_DATA(crtc
->config
.cpu_transcoder
);
2006 uint32_t *data
= (uint32_t *) vsc_psr
;
2009 /* As per BSPec (Pipe Video Data Island Packet), we need to disable
2010 the video DIP being updated before program video DIP data buffer
2011 registers for DIP being updated. */
2012 I915_WRITE(ctl_reg
, 0);
2013 POSTING_READ(ctl_reg
);
2015 for (i
= 0; i
< VIDEO_DIP_VSC_DATA_SIZE
; i
+= 4) {
2016 if (i
< sizeof(struct edp_vsc_psr
))
2017 I915_WRITE(data_reg
+ i
, *data
++);
2019 I915_WRITE(data_reg
+ i
, 0);
2022 I915_WRITE(ctl_reg
, VIDEO_DIP_ENABLE_VSC_HSW
);
2023 POSTING_READ(ctl_reg
);
2026 static void intel_edp_psr_setup_vsc(struct intel_dp
*intel_dp
)
2028 struct edp_vsc_psr psr_vsc
;
2030 /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
2031 memset(&psr_vsc
, 0, sizeof(psr_vsc
));
2032 psr_vsc
.sdp_header
.HB0
= 0;
2033 psr_vsc
.sdp_header
.HB1
= 0x7;
2034 psr_vsc
.sdp_header
.HB2
= 0x2;
2035 psr_vsc
.sdp_header
.HB3
= 0x8;
2036 intel_edp_psr_write_vsc(intel_dp
, &psr_vsc
);
2039 static void intel_edp_psr_enable_sink(struct intel_dp
*intel_dp
)
2041 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
2042 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
2043 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2044 uint32_t aux_clock_divider
;
2045 int precharge
= 0x3;
2046 bool only_standby
= false;
2047 static const uint8_t aux_msg
[] = {
2048 [0] = DP_AUX_NATIVE_WRITE
<< 4,
2049 [1] = DP_SET_POWER
>> 8,
2050 [2] = DP_SET_POWER
& 0xff,
2052 [4] = DP_SET_POWER_D0
,
2056 BUILD_BUG_ON(sizeof(aux_msg
) > 20);
2058 aux_clock_divider
= intel_dp
->get_aux_clock_divider(intel_dp
, 0);
2060 if (IS_BROADWELL(dev
) && dig_port
->port
!= PORT_A
)
2061 only_standby
= true;
2063 /* Enable PSR in sink */
2064 if (intel_dp
->psr_dpcd
[1] & DP_PSR_NO_TRAIN_ON_EXIT
|| only_standby
)
2065 drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_PSR_EN_CFG
,
2066 DP_PSR_ENABLE
& ~DP_PSR_MAIN_LINK_ACTIVE
);
2068 drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_PSR_EN_CFG
,
2069 DP_PSR_ENABLE
| DP_PSR_MAIN_LINK_ACTIVE
);
2071 /* Setup AUX registers */
2072 for (i
= 0; i
< sizeof(aux_msg
); i
+= 4)
2073 I915_WRITE(EDP_PSR_AUX_DATA1(dev
) + i
,
2074 pack_aux(&aux_msg
[i
], sizeof(aux_msg
) - i
));
2076 I915_WRITE(EDP_PSR_AUX_CTL(dev
),
2077 DP_AUX_CH_CTL_TIME_OUT_400us
|
2078 (sizeof(aux_msg
) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT
) |
2079 (precharge
<< DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT
) |
2080 (aux_clock_divider
<< DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT
));
2083 static void intel_edp_psr_enable_source(struct intel_dp
*intel_dp
)
2085 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
2086 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
2087 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2088 uint32_t max_sleep_time
= 0x1f;
2089 uint32_t idle_frames
= 1;
2091 const uint32_t link_entry_time
= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES
;
2092 bool only_standby
= false;
2094 if (IS_BROADWELL(dev
) && dig_port
->port
!= PORT_A
)
2095 only_standby
= true;
2097 if (intel_dp
->psr_dpcd
[1] & DP_PSR_NO_TRAIN_ON_EXIT
|| only_standby
) {
2098 val
|= EDP_PSR_LINK_STANDBY
;
2099 val
|= EDP_PSR_TP2_TP3_TIME_0us
;
2100 val
|= EDP_PSR_TP1_TIME_0us
;
2101 val
|= EDP_PSR_SKIP_AUX_EXIT
;
2102 val
|= IS_BROADWELL(dev
) ? BDW_PSR_SINGLE_FRAME
: 0;
2104 val
|= EDP_PSR_LINK_DISABLE
;
2106 I915_WRITE(EDP_PSR_CTL(dev
), val
|
2107 (IS_BROADWELL(dev
) ? 0 : link_entry_time
) |
2108 max_sleep_time
<< EDP_PSR_MAX_SLEEP_TIME_SHIFT
|
2109 idle_frames
<< EDP_PSR_IDLE_FRAME_SHIFT
|
2113 static bool intel_edp_psr_match_conditions(struct intel_dp
*intel_dp
)
2115 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
2116 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
2117 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2118 struct drm_crtc
*crtc
= dig_port
->base
.base
.crtc
;
2119 struct intel_crtc
*intel_crtc
= to_intel_crtc(crtc
);
2121 lockdep_assert_held(&dev_priv
->psr
.lock
);
2122 WARN_ON(!drm_modeset_is_locked(&dev
->mode_config
.connection_mutex
));
2123 WARN_ON(!drm_modeset_is_locked(&crtc
->mutex
));
2125 dev_priv
->psr
.source_ok
= false;
2127 if (IS_HASWELL(dev
) && dig_port
->port
!= PORT_A
) {
2128 DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
2132 if (!i915
.enable_psr
) {
2133 DRM_DEBUG_KMS("PSR disable by flag\n");
2137 /* Below limitations aren't valid for Broadwell */
2138 if (IS_BROADWELL(dev
))
2141 if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc
->config
.cpu_transcoder
)) &
2143 DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
2147 if (intel_crtc
->config
.adjusted_mode
.flags
& DRM_MODE_FLAG_INTERLACE
) {
2148 DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
2153 dev_priv
->psr
.source_ok
= true;
2157 static void intel_edp_psr_do_enable(struct intel_dp
*intel_dp
)
2159 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2160 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
2161 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2163 WARN_ON(I915_READ(EDP_PSR_CTL(dev
)) & EDP_PSR_ENABLE
);
2164 WARN_ON(dev_priv
->psr
.active
);
2165 lockdep_assert_held(&dev_priv
->psr
.lock
);
2167 /* Enable/Re-enable PSR on the host */
2168 intel_edp_psr_enable_source(intel_dp
);
2170 dev_priv
->psr
.active
= true;
2173 void intel_edp_psr_enable(struct intel_dp
*intel_dp
)
2175 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2176 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2178 if (!HAS_PSR(dev
)) {
2179 DRM_DEBUG_KMS("PSR not supported on this platform\n");
2183 if (!is_edp_psr(intel_dp
)) {
2184 DRM_DEBUG_KMS("PSR not supported by this panel\n");
2188 mutex_lock(&dev_priv
->psr
.lock
);
2189 if (dev_priv
->psr
.enabled
) {
2190 DRM_DEBUG_KMS("PSR already in use\n");
2194 if (!intel_edp_psr_match_conditions(intel_dp
))
2197 dev_priv
->psr
.busy_frontbuffer_bits
= 0;
2199 intel_edp_psr_setup_vsc(intel_dp
);
2201 /* Avoid continuous PSR exit by masking memup and hpd */
2202 I915_WRITE(EDP_PSR_DEBUG_CTL(dev
), EDP_PSR_DEBUG_MASK_MEMUP
|
2203 EDP_PSR_DEBUG_MASK_HPD
| EDP_PSR_DEBUG_MASK_LPSP
);
2205 /* Enable PSR on the panel */
2206 intel_edp_psr_enable_sink(intel_dp
);
2208 dev_priv
->psr
.enabled
= intel_dp
;
2210 mutex_unlock(&dev_priv
->psr
.lock
);
2213 void intel_edp_psr_disable(struct intel_dp
*intel_dp
)
2215 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2216 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2218 mutex_lock(&dev_priv
->psr
.lock
);
2219 if (!dev_priv
->psr
.enabled
) {
2220 mutex_unlock(&dev_priv
->psr
.lock
);
2224 if (dev_priv
->psr
.active
) {
2225 I915_WRITE(EDP_PSR_CTL(dev
),
2226 I915_READ(EDP_PSR_CTL(dev
)) & ~EDP_PSR_ENABLE
);
2228 /* Wait till PSR is idle */
2229 if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev
)) &
2230 EDP_PSR_STATUS_STATE_MASK
) == 0, 2000, 10))
2231 DRM_ERROR("Timed out waiting for PSR Idle State\n");
2233 dev_priv
->psr
.active
= false;
2235 WARN_ON(I915_READ(EDP_PSR_CTL(dev
)) & EDP_PSR_ENABLE
);
2238 dev_priv
->psr
.enabled
= NULL
;
2239 mutex_unlock(&dev_priv
->psr
.lock
);
2241 cancel_delayed_work_sync(&dev_priv
->psr
.work
);
2244 static void intel_edp_psr_work(struct work_struct
*work
)
2246 struct drm_i915_private
*dev_priv
=
2247 container_of(work
, typeof(*dev_priv
), psr
.work
.work
);
2248 struct intel_dp
*intel_dp
= dev_priv
->psr
.enabled
;
2250 /* We have to make sure PSR is ready for re-enable
2251 * otherwise it keeps disabled until next full enable/disable cycle.
2252 * PSR might take some time to get fully disabled
2253 * and be ready for re-enable.
2255 if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv
->dev
)) &
2256 EDP_PSR_STATUS_STATE_MASK
) == 0, 50)) {
2257 DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
2261 mutex_lock(&dev_priv
->psr
.lock
);
2262 intel_dp
= dev_priv
->psr
.enabled
;
2268 * The delayed work can race with an invalidate hence we need to
2269 * recheck. Since psr_flush first clears this and then reschedules we
2270 * won't ever miss a flush when bailing out here.
2272 if (dev_priv
->psr
.busy_frontbuffer_bits
)
2275 intel_edp_psr_do_enable(intel_dp
);
2277 mutex_unlock(&dev_priv
->psr
.lock
);
2280 static void intel_edp_psr_do_exit(struct drm_device
*dev
)
2282 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2284 if (dev_priv
->psr
.active
) {
2285 u32 val
= I915_READ(EDP_PSR_CTL(dev
));
2287 WARN_ON(!(val
& EDP_PSR_ENABLE
));
2289 I915_WRITE(EDP_PSR_CTL(dev
), val
& ~EDP_PSR_ENABLE
);
2291 dev_priv
->psr
.active
= false;
2296 void intel_edp_psr_invalidate(struct drm_device
*dev
,
2297 unsigned frontbuffer_bits
)
2299 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2300 struct drm_crtc
*crtc
;
2303 mutex_lock(&dev_priv
->psr
.lock
);
2304 if (!dev_priv
->psr
.enabled
) {
2305 mutex_unlock(&dev_priv
->psr
.lock
);
2309 crtc
= dp_to_dig_port(dev_priv
->psr
.enabled
)->base
.base
.crtc
;
2310 pipe
= to_intel_crtc(crtc
)->pipe
;
2312 intel_edp_psr_do_exit(dev
);
2314 frontbuffer_bits
&= INTEL_FRONTBUFFER_ALL_MASK(pipe
);
2316 dev_priv
->psr
.busy_frontbuffer_bits
|= frontbuffer_bits
;
2317 mutex_unlock(&dev_priv
->psr
.lock
);
2320 void intel_edp_psr_flush(struct drm_device
*dev
,
2321 unsigned frontbuffer_bits
)
2323 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2324 struct drm_crtc
*crtc
;
2327 mutex_lock(&dev_priv
->psr
.lock
);
2328 if (!dev_priv
->psr
.enabled
) {
2329 mutex_unlock(&dev_priv
->psr
.lock
);
2333 crtc
= dp_to_dig_port(dev_priv
->psr
.enabled
)->base
.base
.crtc
;
2334 pipe
= to_intel_crtc(crtc
)->pipe
;
2335 dev_priv
->psr
.busy_frontbuffer_bits
&= ~frontbuffer_bits
;
2338 * On Haswell sprite plane updates don't result in a psr invalidating
2339 * signal in the hardware. Which means we need to manually fake this in
2340 * software for all flushes, not just when we've seen a preceding
2341 * invalidation through frontbuffer rendering.
2343 if (IS_HASWELL(dev
) &&
2344 (frontbuffer_bits
& INTEL_FRONTBUFFER_SPRITE(pipe
)))
2345 intel_edp_psr_do_exit(dev
);
2347 if (!dev_priv
->psr
.active
&& !dev_priv
->psr
.busy_frontbuffer_bits
)
2348 schedule_delayed_work(&dev_priv
->psr
.work
,
2349 msecs_to_jiffies(100));
2350 mutex_unlock(&dev_priv
->psr
.lock
);
2353 void intel_edp_psr_init(struct drm_device
*dev
)
2355 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2357 INIT_DELAYED_WORK(&dev_priv
->psr
.work
, intel_edp_psr_work
);
2358 mutex_init(&dev_priv
->psr
.lock
);
2361 static void intel_disable_dp(struct intel_encoder
*encoder
)
2363 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2364 struct drm_device
*dev
= encoder
->base
.dev
;
2366 /* Make sure the panel is off before trying to change the mode. But also
2367 * ensure that we have vdd while we switch off the panel. */
2368 intel_edp_panel_vdd_on(intel_dp
);
2369 intel_edp_backlight_off(intel_dp
);
2370 intel_dp_sink_dpms(intel_dp
, DRM_MODE_DPMS_OFF
);
2371 intel_edp_panel_off(intel_dp
);
2373 /* disable the port before the pipe on g4x */
2374 if (INTEL_INFO(dev
)->gen
< 5)
2375 intel_dp_link_down(intel_dp
);
2378 static void ilk_post_disable_dp(struct intel_encoder
*encoder
)
2380 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2381 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2383 intel_dp_link_down(intel_dp
);
2385 ironlake_edp_pll_off(intel_dp
);
2388 static void vlv_post_disable_dp(struct intel_encoder
*encoder
)
2390 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2392 intel_dp_link_down(intel_dp
);
2395 static void chv_post_disable_dp(struct intel_encoder
*encoder
)
2397 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2398 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2399 struct drm_device
*dev
= encoder
->base
.dev
;
2400 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2401 struct intel_crtc
*intel_crtc
=
2402 to_intel_crtc(encoder
->base
.crtc
);
2403 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
2404 enum pipe pipe
= intel_crtc
->pipe
;
2407 intel_dp_link_down(intel_dp
);
2409 mutex_lock(&dev_priv
->dpio_lock
);
2411 /* Propagate soft reset to data lane reset */
2412 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW1(ch
));
2413 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2414 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW1(ch
), val
);
2416 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW1(ch
));
2417 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2418 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW1(ch
), val
);
2420 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW0(ch
));
2421 val
&= ~(DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2422 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW0(ch
), val
);
2424 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW0(ch
));
2425 val
&= ~(DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2426 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW0(ch
), val
);
2428 mutex_unlock(&dev_priv
->dpio_lock
);
2432 _intel_dp_set_link_train(struct intel_dp
*intel_dp
,
2434 uint8_t dp_train_pat
)
2436 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2437 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
2438 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2439 enum port port
= intel_dig_port
->port
;
2442 uint32_t temp
= I915_READ(DP_TP_CTL(port
));
2444 if (dp_train_pat
& DP_LINK_SCRAMBLING_DISABLE
)
2445 temp
|= DP_TP_CTL_SCRAMBLE_DISABLE
;
2447 temp
&= ~DP_TP_CTL_SCRAMBLE_DISABLE
;
2449 temp
&= ~DP_TP_CTL_LINK_TRAIN_MASK
;
2450 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2451 case DP_TRAINING_PATTERN_DISABLE
:
2452 temp
|= DP_TP_CTL_LINK_TRAIN_NORMAL
;
2455 case DP_TRAINING_PATTERN_1
:
2456 temp
|= DP_TP_CTL_LINK_TRAIN_PAT1
;
2458 case DP_TRAINING_PATTERN_2
:
2459 temp
|= DP_TP_CTL_LINK_TRAIN_PAT2
;
2461 case DP_TRAINING_PATTERN_3
:
2462 temp
|= DP_TP_CTL_LINK_TRAIN_PAT3
;
2465 I915_WRITE(DP_TP_CTL(port
), temp
);
2467 } else if (HAS_PCH_CPT(dev
) && (IS_GEN7(dev
) || port
!= PORT_A
)) {
2468 *DP
&= ~DP_LINK_TRAIN_MASK_CPT
;
2470 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2471 case DP_TRAINING_PATTERN_DISABLE
:
2472 *DP
|= DP_LINK_TRAIN_OFF_CPT
;
2474 case DP_TRAINING_PATTERN_1
:
2475 *DP
|= DP_LINK_TRAIN_PAT_1_CPT
;
2477 case DP_TRAINING_PATTERN_2
:
2478 *DP
|= DP_LINK_TRAIN_PAT_2_CPT
;
2480 case DP_TRAINING_PATTERN_3
:
2481 DRM_ERROR("DP training pattern 3 not supported\n");
2482 *DP
|= DP_LINK_TRAIN_PAT_2_CPT
;
2487 if (IS_CHERRYVIEW(dev
))
2488 *DP
&= ~DP_LINK_TRAIN_MASK_CHV
;
2490 *DP
&= ~DP_LINK_TRAIN_MASK
;
2492 switch (dp_train_pat
& DP_TRAINING_PATTERN_MASK
) {
2493 case DP_TRAINING_PATTERN_DISABLE
:
2494 *DP
|= DP_LINK_TRAIN_OFF
;
2496 case DP_TRAINING_PATTERN_1
:
2497 *DP
|= DP_LINK_TRAIN_PAT_1
;
2499 case DP_TRAINING_PATTERN_2
:
2500 *DP
|= DP_LINK_TRAIN_PAT_2
;
2502 case DP_TRAINING_PATTERN_3
:
2503 if (IS_CHERRYVIEW(dev
)) {
2504 *DP
|= DP_LINK_TRAIN_PAT_3_CHV
;
2506 DRM_ERROR("DP training pattern 3 not supported\n");
2507 *DP
|= DP_LINK_TRAIN_PAT_2
;
2514 static void intel_dp_enable_port(struct intel_dp
*intel_dp
)
2516 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2517 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2519 intel_dp
->DP
|= DP_PORT_EN
;
2521 /* enable with pattern 1 (as per spec) */
2522 _intel_dp_set_link_train(intel_dp
, &intel_dp
->DP
,
2523 DP_TRAINING_PATTERN_1
);
2525 I915_WRITE(intel_dp
->output_reg
, intel_dp
->DP
);
2526 POSTING_READ(intel_dp
->output_reg
);
2529 static void intel_enable_dp(struct intel_encoder
*encoder
)
2531 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2532 struct drm_device
*dev
= encoder
->base
.dev
;
2533 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2534 uint32_t dp_reg
= I915_READ(intel_dp
->output_reg
);
2536 if (WARN_ON(dp_reg
& DP_PORT_EN
))
2539 intel_dp_enable_port(intel_dp
);
2540 intel_edp_panel_vdd_on(intel_dp
);
2541 intel_edp_panel_on(intel_dp
);
2542 intel_edp_panel_vdd_off(intel_dp
, true);
2543 intel_dp_sink_dpms(intel_dp
, DRM_MODE_DPMS_ON
);
2544 intel_dp_start_link_train(intel_dp
);
2545 intel_dp_complete_link_train(intel_dp
);
2546 intel_dp_stop_link_train(intel_dp
);
2549 static void g4x_enable_dp(struct intel_encoder
*encoder
)
2551 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2553 intel_enable_dp(encoder
);
2554 intel_edp_backlight_on(intel_dp
);
2557 static void vlv_enable_dp(struct intel_encoder
*encoder
)
2559 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2561 intel_edp_backlight_on(intel_dp
);
2564 static void g4x_pre_enable_dp(struct intel_encoder
*encoder
)
2566 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2567 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2569 intel_dp_prepare(encoder
);
2571 /* Only ilk+ has port A */
2572 if (dport
->port
== PORT_A
) {
2573 ironlake_set_pll_cpu_edp(intel_dp
);
2574 ironlake_edp_pll_on(intel_dp
);
2578 static void vlv_steal_power_sequencer(struct drm_device
*dev
,
2581 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2582 struct intel_encoder
*encoder
;
2584 lockdep_assert_held(&dev_priv
->pps_mutex
);
2586 list_for_each_entry(encoder
, &dev
->mode_config
.encoder_list
,
2588 struct intel_dp
*intel_dp
;
2591 if (encoder
->type
!= INTEL_OUTPUT_EDP
)
2594 intel_dp
= enc_to_intel_dp(&encoder
->base
);
2595 port
= dp_to_dig_port(intel_dp
)->port
;
2597 if (intel_dp
->pps_pipe
!= pipe
)
2600 DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n",
2601 pipe_name(pipe
), port_name(port
));
2603 /* make sure vdd is off before we steal it */
2604 edp_panel_vdd_off_sync(intel_dp
);
2606 intel_dp
->pps_pipe
= INVALID_PIPE
;
2610 static void vlv_init_panel_power_sequencer(struct intel_dp
*intel_dp
)
2612 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
2613 struct intel_encoder
*encoder
= &intel_dig_port
->base
;
2614 struct drm_device
*dev
= encoder
->base
.dev
;
2615 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2616 struct intel_crtc
*crtc
= to_intel_crtc(encoder
->base
.crtc
);
2618 lockdep_assert_held(&dev_priv
->pps_mutex
);
2620 if (intel_dp
->pps_pipe
== crtc
->pipe
)
2624 * If another power sequencer was being used on this
2625 * port previously make sure to turn off vdd there while
2626 * we still have control of it.
2628 if (intel_dp
->pps_pipe
!= INVALID_PIPE
)
2629 edp_panel_vdd_off_sync(intel_dp
);
2632 * We may be stealing the power
2633 * sequencer from another port.
2635 vlv_steal_power_sequencer(dev
, crtc
->pipe
);
2637 /* now it's all ours */
2638 intel_dp
->pps_pipe
= crtc
->pipe
;
2640 DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
2641 pipe_name(intel_dp
->pps_pipe
), port_name(intel_dig_port
->port
));
2643 /* init power sequencer on this pipe and port */
2644 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
2645 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
2648 static void vlv_pre_enable_dp(struct intel_encoder
*encoder
)
2650 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2651 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2652 struct drm_device
*dev
= encoder
->base
.dev
;
2653 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2654 struct intel_crtc
*intel_crtc
= to_intel_crtc(encoder
->base
.crtc
);
2655 enum dpio_channel port
= vlv_dport_to_channel(dport
);
2656 int pipe
= intel_crtc
->pipe
;
2659 mutex_lock(&dev_priv
->dpio_lock
);
2661 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW8(port
));
2668 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW8(port
), val
);
2669 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW14(port
), 0x00760018);
2670 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW23(port
), 0x00400888);
2672 mutex_unlock(&dev_priv
->dpio_lock
);
2674 if (is_edp(intel_dp
)) {
2676 vlv_init_panel_power_sequencer(intel_dp
);
2677 pps_unlock(intel_dp
);
2680 intel_enable_dp(encoder
);
2682 vlv_wait_port_ready(dev_priv
, dport
);
2685 static void vlv_dp_pre_pll_enable(struct intel_encoder
*encoder
)
2687 struct intel_digital_port
*dport
= enc_to_dig_port(&encoder
->base
);
2688 struct drm_device
*dev
= encoder
->base
.dev
;
2689 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2690 struct intel_crtc
*intel_crtc
=
2691 to_intel_crtc(encoder
->base
.crtc
);
2692 enum dpio_channel port
= vlv_dport_to_channel(dport
);
2693 int pipe
= intel_crtc
->pipe
;
2695 intel_dp_prepare(encoder
);
2697 /* Program Tx lane resets to default */
2698 mutex_lock(&dev_priv
->dpio_lock
);
2699 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW0(port
),
2700 DPIO_PCS_TX_LANE2_RESET
|
2701 DPIO_PCS_TX_LANE1_RESET
);
2702 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW1(port
),
2703 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN
|
2704 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN
|
2705 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT
) |
2706 DPIO_PCS_CLK_SOFT_RESET
);
2708 /* Fix up inter-pair skew failure */
2709 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW12(port
), 0x00750f00);
2710 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW11(port
), 0x00001500);
2711 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW14(port
), 0x40400000);
2712 mutex_unlock(&dev_priv
->dpio_lock
);
2715 static void chv_pre_enable_dp(struct intel_encoder
*encoder
)
2717 struct intel_dp
*intel_dp
= enc_to_intel_dp(&encoder
->base
);
2718 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2719 struct drm_device
*dev
= encoder
->base
.dev
;
2720 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2721 struct intel_crtc
*intel_crtc
=
2722 to_intel_crtc(encoder
->base
.crtc
);
2723 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
2724 int pipe
= intel_crtc
->pipe
;
2728 mutex_lock(&dev_priv
->dpio_lock
);
2730 /* allow hardware to manage TX FIFO reset source */
2731 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW11(ch
));
2732 val
&= ~DPIO_LANEDESKEW_STRAP_OVRD
;
2733 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW11(ch
), val
);
2735 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW11(ch
));
2736 val
&= ~DPIO_LANEDESKEW_STRAP_OVRD
;
2737 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW11(ch
), val
);
2739 /* Deassert soft data lane reset*/
2740 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW1(ch
));
2741 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2742 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW1(ch
), val
);
2744 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW1(ch
));
2745 val
|= CHV_PCS_REQ_SOFTRESET_EN
;
2746 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW1(ch
), val
);
2748 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW0(ch
));
2749 val
|= (DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2750 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW0(ch
), val
);
2752 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW0(ch
));
2753 val
|= (DPIO_PCS_TX_LANE2_RESET
| DPIO_PCS_TX_LANE1_RESET
);
2754 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW0(ch
), val
);
2756 /* Program Tx lane latency optimal setting*/
2757 for (i
= 0; i
< 4; i
++) {
2758 /* Set the latency optimal bit */
2759 data
= (i
== 1) ? 0x0 : 0x6;
2760 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW11(ch
, i
),
2761 data
<< DPIO_FRC_LATENCY_SHFIT
);
2763 /* Set the upar bit */
2764 data
= (i
== 1) ? 0x0 : 0x1;
2765 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW14(ch
, i
),
2766 data
<< DPIO_UPAR_SHIFT
);
2769 /* Data lane stagger programming */
2770 /* FIXME: Fix up value only after power analysis */
2772 mutex_unlock(&dev_priv
->dpio_lock
);
2774 if (is_edp(intel_dp
)) {
2776 vlv_init_panel_power_sequencer(intel_dp
);
2777 pps_unlock(intel_dp
);
2780 intel_enable_dp(encoder
);
2782 vlv_wait_port_ready(dev_priv
, dport
);
2785 static void chv_dp_pre_pll_enable(struct intel_encoder
*encoder
)
2787 struct intel_digital_port
*dport
= enc_to_dig_port(&encoder
->base
);
2788 struct drm_device
*dev
= encoder
->base
.dev
;
2789 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2790 struct intel_crtc
*intel_crtc
=
2791 to_intel_crtc(encoder
->base
.crtc
);
2792 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
2793 enum pipe pipe
= intel_crtc
->pipe
;
2796 intel_dp_prepare(encoder
);
2798 mutex_lock(&dev_priv
->dpio_lock
);
2800 /* program left/right clock distribution */
2801 if (pipe
!= PIPE_B
) {
2802 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
);
2803 val
&= ~(CHV_BUFLEFTENA1_MASK
| CHV_BUFRIGHTENA1_MASK
);
2805 val
|= CHV_BUFLEFTENA1_FORCE
;
2807 val
|= CHV_BUFRIGHTENA1_FORCE
;
2808 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW5_CH0
, val
);
2810 val
= vlv_dpio_read(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
);
2811 val
&= ~(CHV_BUFLEFTENA2_MASK
| CHV_BUFRIGHTENA2_MASK
);
2813 val
|= CHV_BUFLEFTENA2_FORCE
;
2815 val
|= CHV_BUFRIGHTENA2_FORCE
;
2816 vlv_dpio_write(dev_priv
, pipe
, _CHV_CMN_DW1_CH1
, val
);
2819 /* program clock channel usage */
2820 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW8(ch
));
2821 val
|= CHV_PCS_USEDCLKCHANNEL_OVRRIDE
;
2823 val
&= ~CHV_PCS_USEDCLKCHANNEL
;
2825 val
|= CHV_PCS_USEDCLKCHANNEL
;
2826 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW8(ch
), val
);
2828 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW8(ch
));
2829 val
|= CHV_PCS_USEDCLKCHANNEL_OVRRIDE
;
2831 val
&= ~CHV_PCS_USEDCLKCHANNEL
;
2833 val
|= CHV_PCS_USEDCLKCHANNEL
;
2834 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW8(ch
), val
);
2837 * This a a bit weird since generally CL
2838 * matches the pipe, but here we need to
2839 * pick the CL based on the port.
2841 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_CMN_DW19(ch
));
2843 val
&= ~CHV_CMN_USEDCLKCHANNEL
;
2845 val
|= CHV_CMN_USEDCLKCHANNEL
;
2846 vlv_dpio_write(dev_priv
, pipe
, CHV_CMN_DW19(ch
), val
);
2848 mutex_unlock(&dev_priv
->dpio_lock
);
2852 * Native read with retry for link status and receiver capability reads for
2853 * cases where the sink may still be asleep.
2855 * Sinks are *supposed* to come up within 1ms from an off state, but we're also
2856 * supposed to retry 3 times per the spec.
2859 intel_dp_dpcd_read_wake(struct drm_dp_aux
*aux
, unsigned int offset
,
2860 void *buffer
, size_t size
)
2865 for (i
= 0; i
< 3; i
++) {
2866 ret
= drm_dp_dpcd_read(aux
, offset
, buffer
, size
);
2876 * Fetch AUX CH registers 0x202 - 0x207 which contain
2877 * link status information
2880 intel_dp_get_link_status(struct intel_dp
*intel_dp
, uint8_t link_status
[DP_LINK_STATUS_SIZE
])
2882 return intel_dp_dpcd_read_wake(&intel_dp
->aux
,
2885 DP_LINK_STATUS_SIZE
) == DP_LINK_STATUS_SIZE
;
2888 /* These are source-specific values. */
2890 intel_dp_voltage_max(struct intel_dp
*intel_dp
)
2892 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2893 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2895 if (INTEL_INFO(dev
)->gen
>= 9)
2896 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
2897 else if (IS_VALLEYVIEW(dev
))
2898 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
2899 else if (IS_GEN7(dev
) && port
== PORT_A
)
2900 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
2901 else if (HAS_PCH_CPT(dev
) && port
!= PORT_A
)
2902 return DP_TRAIN_VOLTAGE_SWING_LEVEL_3
;
2904 return DP_TRAIN_VOLTAGE_SWING_LEVEL_2
;
2908 intel_dp_pre_emphasis_max(struct intel_dp
*intel_dp
, uint8_t voltage_swing
)
2910 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2911 enum port port
= dp_to_dig_port(intel_dp
)->port
;
2913 if (INTEL_INFO(dev
)->gen
>= 9) {
2914 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2915 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2916 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
2917 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2918 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2919 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2920 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
2922 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
2924 } else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
)) {
2925 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2926 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2927 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
2928 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2929 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2930 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2931 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
2932 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
2934 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
2936 } else if (IS_VALLEYVIEW(dev
)) {
2937 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2938 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2939 return DP_TRAIN_PRE_EMPH_LEVEL_3
;
2940 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2941 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2942 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2943 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
2944 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
2946 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
2948 } else if (IS_GEN7(dev
) && port
== PORT_A
) {
2949 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2950 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2951 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2952 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2953 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2954 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
2956 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
2959 switch (voltage_swing
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2960 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2961 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2962 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2963 return DP_TRAIN_PRE_EMPH_LEVEL_2
;
2964 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2965 return DP_TRAIN_PRE_EMPH_LEVEL_1
;
2966 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
2968 return DP_TRAIN_PRE_EMPH_LEVEL_0
;
2973 static uint32_t intel_vlv_signal_levels(struct intel_dp
*intel_dp
)
2975 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
2976 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
2977 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
2978 struct intel_crtc
*intel_crtc
=
2979 to_intel_crtc(dport
->base
.base
.crtc
);
2980 unsigned long demph_reg_value
, preemph_reg_value
,
2981 uniqtranscale_reg_value
;
2982 uint8_t train_set
= intel_dp
->train_set
[0];
2983 enum dpio_channel port
= vlv_dport_to_channel(dport
);
2984 int pipe
= intel_crtc
->pipe
;
2986 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
2987 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
2988 preemph_reg_value
= 0x0004000;
2989 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
2990 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
2991 demph_reg_value
= 0x2B405555;
2992 uniqtranscale_reg_value
= 0x552AB83A;
2994 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
2995 demph_reg_value
= 0x2B404040;
2996 uniqtranscale_reg_value
= 0x5548B83A;
2998 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
2999 demph_reg_value
= 0x2B245555;
3000 uniqtranscale_reg_value
= 0x5560B83A;
3002 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3003 demph_reg_value
= 0x2B405555;
3004 uniqtranscale_reg_value
= 0x5598DA3A;
3010 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3011 preemph_reg_value
= 0x0002000;
3012 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3013 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3014 demph_reg_value
= 0x2B404040;
3015 uniqtranscale_reg_value
= 0x5552B83A;
3017 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3018 demph_reg_value
= 0x2B404848;
3019 uniqtranscale_reg_value
= 0x5580B83A;
3021 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3022 demph_reg_value
= 0x2B404040;
3023 uniqtranscale_reg_value
= 0x55ADDA3A;
3029 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3030 preemph_reg_value
= 0x0000000;
3031 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3032 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3033 demph_reg_value
= 0x2B305555;
3034 uniqtranscale_reg_value
= 0x5570B83A;
3036 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3037 demph_reg_value
= 0x2B2B4040;
3038 uniqtranscale_reg_value
= 0x55ADDA3A;
3044 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3045 preemph_reg_value
= 0x0006000;
3046 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3047 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3048 demph_reg_value
= 0x1B405555;
3049 uniqtranscale_reg_value
= 0x55ADDA3A;
3059 mutex_lock(&dev_priv
->dpio_lock
);
3060 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW5(port
), 0x00000000);
3061 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW4(port
), demph_reg_value
);
3062 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW2(port
),
3063 uniqtranscale_reg_value
);
3064 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW3(port
), 0x0C782040);
3065 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW11(port
), 0x00030000);
3066 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS_DW9(port
), preemph_reg_value
);
3067 vlv_dpio_write(dev_priv
, pipe
, VLV_TX_DW5(port
), 0x80000000);
3068 mutex_unlock(&dev_priv
->dpio_lock
);
3073 static uint32_t intel_chv_signal_levels(struct intel_dp
*intel_dp
)
3075 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
3076 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3077 struct intel_digital_port
*dport
= dp_to_dig_port(intel_dp
);
3078 struct intel_crtc
*intel_crtc
= to_intel_crtc(dport
->base
.base
.crtc
);
3079 u32 deemph_reg_value
, margin_reg_value
, val
;
3080 uint8_t train_set
= intel_dp
->train_set
[0];
3081 enum dpio_channel ch
= vlv_dport_to_channel(dport
);
3082 enum pipe pipe
= intel_crtc
->pipe
;
3085 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
3086 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
3087 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3088 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3089 deemph_reg_value
= 128;
3090 margin_reg_value
= 52;
3092 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3093 deemph_reg_value
= 128;
3094 margin_reg_value
= 77;
3096 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3097 deemph_reg_value
= 128;
3098 margin_reg_value
= 102;
3100 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3101 deemph_reg_value
= 128;
3102 margin_reg_value
= 154;
3103 /* FIXME extra to set for 1200 */
3109 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3110 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3111 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3112 deemph_reg_value
= 85;
3113 margin_reg_value
= 78;
3115 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3116 deemph_reg_value
= 85;
3117 margin_reg_value
= 116;
3119 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3120 deemph_reg_value
= 85;
3121 margin_reg_value
= 154;
3127 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3128 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3129 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3130 deemph_reg_value
= 64;
3131 margin_reg_value
= 104;
3133 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3134 deemph_reg_value
= 64;
3135 margin_reg_value
= 154;
3141 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3142 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3143 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3144 deemph_reg_value
= 43;
3145 margin_reg_value
= 154;
3155 mutex_lock(&dev_priv
->dpio_lock
);
3157 /* Clear calc init */
3158 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW10(ch
));
3159 val
&= ~(DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
);
3160 val
&= ~(DPIO_PCS_TX1DEEMP_MASK
| DPIO_PCS_TX2DEEMP_MASK
);
3161 val
|= DPIO_PCS_TX1DEEMP_9P5
| DPIO_PCS_TX2DEEMP_9P5
;
3162 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW10(ch
), val
);
3164 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW10(ch
));
3165 val
&= ~(DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
);
3166 val
&= ~(DPIO_PCS_TX1DEEMP_MASK
| DPIO_PCS_TX2DEEMP_MASK
);
3167 val
|= DPIO_PCS_TX1DEEMP_9P5
| DPIO_PCS_TX2DEEMP_9P5
;
3168 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW10(ch
), val
);
3170 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW9(ch
));
3171 val
&= ~(DPIO_PCS_TX1MARGIN_MASK
| DPIO_PCS_TX2MARGIN_MASK
);
3172 val
|= DPIO_PCS_TX1MARGIN_000
| DPIO_PCS_TX2MARGIN_000
;
3173 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW9(ch
), val
);
3175 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW9(ch
));
3176 val
&= ~(DPIO_PCS_TX1MARGIN_MASK
| DPIO_PCS_TX2MARGIN_MASK
);
3177 val
|= DPIO_PCS_TX1MARGIN_000
| DPIO_PCS_TX2MARGIN_000
;
3178 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW9(ch
), val
);
3180 /* Program swing deemph */
3181 for (i
= 0; i
< 4; i
++) {
3182 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW4(ch
, i
));
3183 val
&= ~DPIO_SWING_DEEMPH9P5_MASK
;
3184 val
|= deemph_reg_value
<< DPIO_SWING_DEEMPH9P5_SHIFT
;
3185 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW4(ch
, i
), val
);
3188 /* Program swing margin */
3189 for (i
= 0; i
< 4; i
++) {
3190 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
));
3191 val
&= ~DPIO_SWING_MARGIN000_MASK
;
3192 val
|= margin_reg_value
<< DPIO_SWING_MARGIN000_SHIFT
;
3193 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
), val
);
3196 /* Disable unique transition scale */
3197 for (i
= 0; i
< 4; i
++) {
3198 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
));
3199 val
&= ~DPIO_TX_UNIQ_TRANS_SCALE_EN
;
3200 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
), val
);
3203 if (((train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
)
3204 == DP_TRAIN_PRE_EMPH_LEVEL_0
) &&
3205 ((train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
)
3206 == DP_TRAIN_VOLTAGE_SWING_LEVEL_3
)) {
3209 * The document said it needs to set bit 27 for ch0 and bit 26
3210 * for ch1. Might be a typo in the doc.
3211 * For now, for this unique transition scale selection, set bit
3212 * 27 for ch0 and ch1.
3214 for (i
= 0; i
< 4; i
++) {
3215 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
));
3216 val
|= DPIO_TX_UNIQ_TRANS_SCALE_EN
;
3217 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW3(ch
, i
), val
);
3220 for (i
= 0; i
< 4; i
++) {
3221 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
));
3222 val
&= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT
);
3223 val
|= (0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT
);
3224 vlv_dpio_write(dev_priv
, pipe
, CHV_TX_DW2(ch
, i
), val
);
3228 /* Start swing calculation */
3229 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS01_DW10(ch
));
3230 val
|= DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
;
3231 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS01_DW10(ch
), val
);
3233 val
= vlv_dpio_read(dev_priv
, pipe
, VLV_PCS23_DW10(ch
));
3234 val
|= DPIO_PCS_SWING_CALC_TX0_TX2
| DPIO_PCS_SWING_CALC_TX1_TX3
;
3235 vlv_dpio_write(dev_priv
, pipe
, VLV_PCS23_DW10(ch
), val
);
3238 val
= vlv_dpio_read(dev_priv
, pipe
, CHV_CMN_DW30
);
3239 val
|= DPIO_LRC_BYPASS
;
3240 vlv_dpio_write(dev_priv
, pipe
, CHV_CMN_DW30
, val
);
3242 mutex_unlock(&dev_priv
->dpio_lock
);
3248 intel_get_adjust_train(struct intel_dp
*intel_dp
,
3249 const uint8_t link_status
[DP_LINK_STATUS_SIZE
])
3254 uint8_t voltage_max
;
3255 uint8_t preemph_max
;
3257 for (lane
= 0; lane
< intel_dp
->lane_count
; lane
++) {
3258 uint8_t this_v
= drm_dp_get_adjust_request_voltage(link_status
, lane
);
3259 uint8_t this_p
= drm_dp_get_adjust_request_pre_emphasis(link_status
, lane
);
3267 voltage_max
= intel_dp_voltage_max(intel_dp
);
3268 if (v
>= voltage_max
)
3269 v
= voltage_max
| DP_TRAIN_MAX_SWING_REACHED
;
3271 preemph_max
= intel_dp_pre_emphasis_max(intel_dp
, v
);
3272 if (p
>= preemph_max
)
3273 p
= preemph_max
| DP_TRAIN_MAX_PRE_EMPHASIS_REACHED
;
3275 for (lane
= 0; lane
< 4; lane
++)
3276 intel_dp
->train_set
[lane
] = v
| p
;
3280 intel_gen4_signal_levels(uint8_t train_set
)
3282 uint32_t signal_levels
= 0;
3284 switch (train_set
& DP_TRAIN_VOLTAGE_SWING_MASK
) {
3285 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
:
3287 signal_levels
|= DP_VOLTAGE_0_4
;
3289 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
:
3290 signal_levels
|= DP_VOLTAGE_0_6
;
3292 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
:
3293 signal_levels
|= DP_VOLTAGE_0_8
;
3295 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
:
3296 signal_levels
|= DP_VOLTAGE_1_2
;
3299 switch (train_set
& DP_TRAIN_PRE_EMPHASIS_MASK
) {
3300 case DP_TRAIN_PRE_EMPH_LEVEL_0
:
3302 signal_levels
|= DP_PRE_EMPHASIS_0
;
3304 case DP_TRAIN_PRE_EMPH_LEVEL_1
:
3305 signal_levels
|= DP_PRE_EMPHASIS_3_5
;
3307 case DP_TRAIN_PRE_EMPH_LEVEL_2
:
3308 signal_levels
|= DP_PRE_EMPHASIS_6
;
3310 case DP_TRAIN_PRE_EMPH_LEVEL_3
:
3311 signal_levels
|= DP_PRE_EMPHASIS_9_5
;
3314 return signal_levels
;
3317 /* Gen6's DP voltage swing and pre-emphasis control */
3319 intel_gen6_edp_signal_levels(uint8_t train_set
)
3321 int signal_levels
= train_set
& (DP_TRAIN_VOLTAGE_SWING_MASK
|
3322 DP_TRAIN_PRE_EMPHASIS_MASK
);
3323 switch (signal_levels
) {
3324 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3325 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3326 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B
;
3327 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3328 return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B
;
3329 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3330 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3331 return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B
;
3332 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3333 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3334 return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B
;
3335 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3336 case DP_TRAIN_VOLTAGE_SWING_LEVEL_3
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3337 return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B
;
3339 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3340 "0x%x\n", signal_levels
);
3341 return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B
;
3345 /* Gen7's DP voltage swing and pre-emphasis control */
3347 intel_gen7_edp_signal_levels(uint8_t train_set
)
3349 int signal_levels
= train_set
& (DP_TRAIN_VOLTAGE_SWING_MASK
|
3350 DP_TRAIN_PRE_EMPHASIS_MASK
);
3351 switch (signal_levels
) {
3352 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3353 return EDP_LINK_TRAIN_400MV_0DB_IVB
;
3354 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3355 return EDP_LINK_TRAIN_400MV_3_5DB_IVB
;
3356 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3357 return EDP_LINK_TRAIN_400MV_6DB_IVB
;
3359 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3360 return EDP_LINK_TRAIN_600MV_0DB_IVB
;
3361 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3362 return EDP_LINK_TRAIN_600MV_3_5DB_IVB
;
3364 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3365 return EDP_LINK_TRAIN_800MV_0DB_IVB
;
3366 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3367 return EDP_LINK_TRAIN_800MV_3_5DB_IVB
;
3370 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3371 "0x%x\n", signal_levels
);
3372 return EDP_LINK_TRAIN_500MV_0DB_IVB
;
3376 /* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
3378 intel_hsw_signal_levels(uint8_t train_set
)
3380 int signal_levels
= train_set
& (DP_TRAIN_VOLTAGE_SWING_MASK
|
3381 DP_TRAIN_PRE_EMPHASIS_MASK
);
3382 switch (signal_levels
) {
3383 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3384 return DDI_BUF_TRANS_SELECT(0);
3385 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3386 return DDI_BUF_TRANS_SELECT(1);
3387 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3388 return DDI_BUF_TRANS_SELECT(2);
3389 case DP_TRAIN_VOLTAGE_SWING_LEVEL_0
| DP_TRAIN_PRE_EMPH_LEVEL_3
:
3390 return DDI_BUF_TRANS_SELECT(3);
3392 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3393 return DDI_BUF_TRANS_SELECT(4);
3394 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3395 return DDI_BUF_TRANS_SELECT(5);
3396 case DP_TRAIN_VOLTAGE_SWING_LEVEL_1
| DP_TRAIN_PRE_EMPH_LEVEL_2
:
3397 return DDI_BUF_TRANS_SELECT(6);
3399 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_0
:
3400 return DDI_BUF_TRANS_SELECT(7);
3401 case DP_TRAIN_VOLTAGE_SWING_LEVEL_2
| DP_TRAIN_PRE_EMPH_LEVEL_1
:
3402 return DDI_BUF_TRANS_SELECT(8);
3404 DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
3405 "0x%x\n", signal_levels
);
3406 return DDI_BUF_TRANS_SELECT(0);
3410 /* Properly updates "DP" with the correct signal levels. */
3412 intel_dp_set_signal_levels(struct intel_dp
*intel_dp
, uint32_t *DP
)
3414 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3415 enum port port
= intel_dig_port
->port
;
3416 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3417 uint32_t signal_levels
, mask
;
3418 uint8_t train_set
= intel_dp
->train_set
[0];
3420 if (IS_HASWELL(dev
) || IS_BROADWELL(dev
) || INTEL_INFO(dev
)->gen
>= 9) {
3421 signal_levels
= intel_hsw_signal_levels(train_set
);
3422 mask
= DDI_BUF_EMP_MASK
;
3423 } else if (IS_CHERRYVIEW(dev
)) {
3424 signal_levels
= intel_chv_signal_levels(intel_dp
);
3426 } else if (IS_VALLEYVIEW(dev
)) {
3427 signal_levels
= intel_vlv_signal_levels(intel_dp
);
3429 } else if (IS_GEN7(dev
) && port
== PORT_A
) {
3430 signal_levels
= intel_gen7_edp_signal_levels(train_set
);
3431 mask
= EDP_LINK_TRAIN_VOL_EMP_MASK_IVB
;
3432 } else if (IS_GEN6(dev
) && port
== PORT_A
) {
3433 signal_levels
= intel_gen6_edp_signal_levels(train_set
);
3434 mask
= EDP_LINK_TRAIN_VOL_EMP_MASK_SNB
;
3436 signal_levels
= intel_gen4_signal_levels(train_set
);
3437 mask
= DP_VOLTAGE_MASK
| DP_PRE_EMPHASIS_MASK
;
3440 DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels
);
3442 *DP
= (*DP
& ~mask
) | signal_levels
;
3446 intel_dp_set_link_train(struct intel_dp
*intel_dp
,
3448 uint8_t dp_train_pat
)
3450 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3451 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3452 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3453 uint8_t buf
[sizeof(intel_dp
->train_set
) + 1];
3456 _intel_dp_set_link_train(intel_dp
, DP
, dp_train_pat
);
3458 I915_WRITE(intel_dp
->output_reg
, *DP
);
3459 POSTING_READ(intel_dp
->output_reg
);
3461 buf
[0] = dp_train_pat
;
3462 if ((dp_train_pat
& DP_TRAINING_PATTERN_MASK
) ==
3463 DP_TRAINING_PATTERN_DISABLE
) {
3464 /* don't write DP_TRAINING_LANEx_SET on disable */
3467 /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
3468 memcpy(buf
+ 1, intel_dp
->train_set
, intel_dp
->lane_count
);
3469 len
= intel_dp
->lane_count
+ 1;
3472 ret
= drm_dp_dpcd_write(&intel_dp
->aux
, DP_TRAINING_PATTERN_SET
,
3479 intel_dp_reset_link_train(struct intel_dp
*intel_dp
, uint32_t *DP
,
3480 uint8_t dp_train_pat
)
3482 memset(intel_dp
->train_set
, 0, sizeof(intel_dp
->train_set
));
3483 intel_dp_set_signal_levels(intel_dp
, DP
);
3484 return intel_dp_set_link_train(intel_dp
, DP
, dp_train_pat
);
3488 intel_dp_update_link_train(struct intel_dp
*intel_dp
, uint32_t *DP
,
3489 const uint8_t link_status
[DP_LINK_STATUS_SIZE
])
3491 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3492 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3493 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3496 intel_get_adjust_train(intel_dp
, link_status
);
3497 intel_dp_set_signal_levels(intel_dp
, DP
);
3499 I915_WRITE(intel_dp
->output_reg
, *DP
);
3500 POSTING_READ(intel_dp
->output_reg
);
3502 ret
= drm_dp_dpcd_write(&intel_dp
->aux
, DP_TRAINING_LANE0_SET
,
3503 intel_dp
->train_set
, intel_dp
->lane_count
);
3505 return ret
== intel_dp
->lane_count
;
3508 static void intel_dp_set_idle_link_train(struct intel_dp
*intel_dp
)
3510 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3511 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3512 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3513 enum port port
= intel_dig_port
->port
;
3519 val
= I915_READ(DP_TP_CTL(port
));
3520 val
&= ~DP_TP_CTL_LINK_TRAIN_MASK
;
3521 val
|= DP_TP_CTL_LINK_TRAIN_IDLE
;
3522 I915_WRITE(DP_TP_CTL(port
), val
);
3525 * On PORT_A we can have only eDP in SST mode. There the only reason
3526 * we need to set idle transmission mode is to work around a HW issue
3527 * where we enable the pipe while not in idle link-training mode.
3528 * In this case there is requirement to wait for a minimum number of
3529 * idle patterns to be sent.
3534 if (wait_for((I915_READ(DP_TP_STATUS(port
)) & DP_TP_STATUS_IDLE_DONE
),
3536 DRM_ERROR("Timed out waiting for DP idle patterns\n");
3539 /* Enable corresponding port and start training pattern 1 */
3541 intel_dp_start_link_train(struct intel_dp
*intel_dp
)
3543 struct drm_encoder
*encoder
= &dp_to_dig_port(intel_dp
)->base
.base
;
3544 struct drm_device
*dev
= encoder
->dev
;
3547 int voltage_tries
, loop_tries
;
3548 uint32_t DP
= intel_dp
->DP
;
3549 uint8_t link_config
[2];
3552 intel_ddi_prepare_link_retrain(encoder
);
3554 /* Write the link configuration data */
3555 link_config
[0] = intel_dp
->link_bw
;
3556 link_config
[1] = intel_dp
->lane_count
;
3557 if (drm_dp_enhanced_frame_cap(intel_dp
->dpcd
))
3558 link_config
[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN
;
3559 drm_dp_dpcd_write(&intel_dp
->aux
, DP_LINK_BW_SET
, link_config
, 2);
3562 link_config
[1] = DP_SET_ANSI_8B10B
;
3563 drm_dp_dpcd_write(&intel_dp
->aux
, DP_DOWNSPREAD_CTRL
, link_config
, 2);
3567 /* clock recovery */
3568 if (!intel_dp_reset_link_train(intel_dp
, &DP
,
3569 DP_TRAINING_PATTERN_1
|
3570 DP_LINK_SCRAMBLING_DISABLE
)) {
3571 DRM_ERROR("failed to enable link training\n");
3579 uint8_t link_status
[DP_LINK_STATUS_SIZE
];
3581 drm_dp_link_train_clock_recovery_delay(intel_dp
->dpcd
);
3582 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
3583 DRM_ERROR("failed to get link status\n");
3587 if (drm_dp_clock_recovery_ok(link_status
, intel_dp
->lane_count
)) {
3588 DRM_DEBUG_KMS("clock recovery OK\n");
3592 /* Check to see if we've tried the max voltage */
3593 for (i
= 0; i
< intel_dp
->lane_count
; i
++)
3594 if ((intel_dp
->train_set
[i
] & DP_TRAIN_MAX_SWING_REACHED
) == 0)
3596 if (i
== intel_dp
->lane_count
) {
3598 if (loop_tries
== 5) {
3599 DRM_ERROR("too many full retries, give up\n");
3602 intel_dp_reset_link_train(intel_dp
, &DP
,
3603 DP_TRAINING_PATTERN_1
|
3604 DP_LINK_SCRAMBLING_DISABLE
);
3609 /* Check to see if we've tried the same voltage 5 times */
3610 if ((intel_dp
->train_set
[0] & DP_TRAIN_VOLTAGE_SWING_MASK
) == voltage
) {
3612 if (voltage_tries
== 5) {
3613 DRM_ERROR("too many voltage retries, give up\n");
3618 voltage
= intel_dp
->train_set
[0] & DP_TRAIN_VOLTAGE_SWING_MASK
;
3620 /* Update training set as requested by target */
3621 if (!intel_dp_update_link_train(intel_dp
, &DP
, link_status
)) {
3622 DRM_ERROR("failed to update link training\n");
3631 intel_dp_complete_link_train(struct intel_dp
*intel_dp
)
3633 bool channel_eq
= false;
3634 int tries
, cr_tries
;
3635 uint32_t DP
= intel_dp
->DP
;
3636 uint32_t training_pattern
= DP_TRAINING_PATTERN_2
;
3638 /* Training Pattern 3 for HBR2 ot 1.2 devices that support it*/
3639 if (intel_dp
->link_bw
== DP_LINK_BW_5_4
|| intel_dp
->use_tps3
)
3640 training_pattern
= DP_TRAINING_PATTERN_3
;
3642 /* channel equalization */
3643 if (!intel_dp_set_link_train(intel_dp
, &DP
,
3645 DP_LINK_SCRAMBLING_DISABLE
)) {
3646 DRM_ERROR("failed to start channel equalization\n");
3654 uint8_t link_status
[DP_LINK_STATUS_SIZE
];
3657 DRM_ERROR("failed to train DP, aborting\n");
3661 drm_dp_link_train_channel_eq_delay(intel_dp
->dpcd
);
3662 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
3663 DRM_ERROR("failed to get link status\n");
3667 /* Make sure clock is still ok */
3668 if (!drm_dp_clock_recovery_ok(link_status
, intel_dp
->lane_count
)) {
3669 intel_dp_start_link_train(intel_dp
);
3670 intel_dp_set_link_train(intel_dp
, &DP
,
3672 DP_LINK_SCRAMBLING_DISABLE
);
3677 if (drm_dp_channel_eq_ok(link_status
, intel_dp
->lane_count
)) {
3682 /* Try 5 times, then try clock recovery if that fails */
3684 intel_dp_link_down(intel_dp
);
3685 intel_dp_start_link_train(intel_dp
);
3686 intel_dp_set_link_train(intel_dp
, &DP
,
3688 DP_LINK_SCRAMBLING_DISABLE
);
3694 /* Update training set as requested by target */
3695 if (!intel_dp_update_link_train(intel_dp
, &DP
, link_status
)) {
3696 DRM_ERROR("failed to update link training\n");
3702 intel_dp_set_idle_link_train(intel_dp
);
3707 DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
3711 void intel_dp_stop_link_train(struct intel_dp
*intel_dp
)
3713 intel_dp_set_link_train(intel_dp
, &intel_dp
->DP
,
3714 DP_TRAINING_PATTERN_DISABLE
);
3718 intel_dp_link_down(struct intel_dp
*intel_dp
)
3720 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3721 enum port port
= intel_dig_port
->port
;
3722 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3723 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3724 struct intel_crtc
*intel_crtc
=
3725 to_intel_crtc(intel_dig_port
->base
.base
.crtc
);
3726 uint32_t DP
= intel_dp
->DP
;
3728 if (WARN_ON(HAS_DDI(dev
)))
3731 if (WARN_ON((I915_READ(intel_dp
->output_reg
) & DP_PORT_EN
) == 0))
3734 DRM_DEBUG_KMS("\n");
3736 if (HAS_PCH_CPT(dev
) && (IS_GEN7(dev
) || port
!= PORT_A
)) {
3737 DP
&= ~DP_LINK_TRAIN_MASK_CPT
;
3738 I915_WRITE(intel_dp
->output_reg
, DP
| DP_LINK_TRAIN_PAT_IDLE_CPT
);
3740 if (IS_CHERRYVIEW(dev
))
3741 DP
&= ~DP_LINK_TRAIN_MASK_CHV
;
3743 DP
&= ~DP_LINK_TRAIN_MASK
;
3744 I915_WRITE(intel_dp
->output_reg
, DP
| DP_LINK_TRAIN_PAT_IDLE
);
3746 POSTING_READ(intel_dp
->output_reg
);
3748 if (HAS_PCH_IBX(dev
) &&
3749 I915_READ(intel_dp
->output_reg
) & DP_PIPEB_SELECT
) {
3750 struct drm_crtc
*crtc
= intel_dig_port
->base
.base
.crtc
;
3752 /* Hardware workaround: leaving our transcoder select
3753 * set to transcoder B while it's off will prevent the
3754 * corresponding HDMI output on transcoder A.
3756 * Combine this with another hardware workaround:
3757 * transcoder select bit can only be cleared while the
3760 DP
&= ~DP_PIPEB_SELECT
;
3761 I915_WRITE(intel_dp
->output_reg
, DP
);
3763 /* Changes to enable or select take place the vblank
3764 * after being written.
3766 if (WARN_ON(crtc
== NULL
)) {
3767 /* We should never try to disable a port without a crtc
3768 * attached. For paranoia keep the code around for a
3770 POSTING_READ(intel_dp
->output_reg
);
3773 intel_wait_for_vblank(dev
, intel_crtc
->pipe
);
3776 DP
&= ~DP_AUDIO_OUTPUT_ENABLE
;
3777 I915_WRITE(intel_dp
->output_reg
, DP
& ~DP_PORT_EN
);
3778 POSTING_READ(intel_dp
->output_reg
);
3779 msleep(intel_dp
->panel_power_down_delay
);
3783 intel_dp_get_dpcd(struct intel_dp
*intel_dp
)
3785 struct intel_digital_port
*dig_port
= dp_to_dig_port(intel_dp
);
3786 struct drm_device
*dev
= dig_port
->base
.base
.dev
;
3787 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
3789 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, 0x000, intel_dp
->dpcd
,
3790 sizeof(intel_dp
->dpcd
)) < 0)
3791 return false; /* aux transfer failed */
3793 DRM_DEBUG_KMS("DPCD: %*ph\n", (int) sizeof(intel_dp
->dpcd
), intel_dp
->dpcd
);
3795 if (intel_dp
->dpcd
[DP_DPCD_REV
] == 0)
3796 return false; /* DPCD not present */
3798 /* Check if the panel supports PSR */
3799 memset(intel_dp
->psr_dpcd
, 0, sizeof(intel_dp
->psr_dpcd
));
3800 if (is_edp(intel_dp
)) {
3801 intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_PSR_SUPPORT
,
3803 sizeof(intel_dp
->psr_dpcd
));
3804 if (intel_dp
->psr_dpcd
[0] & DP_PSR_IS_SUPPORTED
) {
3805 dev_priv
->psr
.sink_support
= true;
3806 DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
3810 /* Training Pattern 3 support */
3811 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x12 &&
3812 intel_dp
->dpcd
[DP_MAX_LANE_COUNT
] & DP_TPS3_SUPPORTED
) {
3813 intel_dp
->use_tps3
= true;
3814 DRM_DEBUG_KMS("Displayport TPS3 supported\n");
3816 intel_dp
->use_tps3
= false;
3818 if (!(intel_dp
->dpcd
[DP_DOWNSTREAMPORT_PRESENT
] &
3819 DP_DWN_STRM_PORT_PRESENT
))
3820 return true; /* native DP sink */
3822 if (intel_dp
->dpcd
[DP_DPCD_REV
] == 0x10)
3823 return true; /* no per-port downstream info */
3825 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_DOWNSTREAM_PORT_0
,
3826 intel_dp
->downstream_ports
,
3827 DP_MAX_DOWNSTREAM_PORTS
) < 0)
3828 return false; /* downstream port status fetch failed */
3834 intel_dp_probe_oui(struct intel_dp
*intel_dp
)
3838 if (!(intel_dp
->dpcd
[DP_DOWN_STREAM_PORT_COUNT
] & DP_OUI_SUPPORT
))
3841 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_SINK_OUI
, buf
, 3) == 3)
3842 DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
3843 buf
[0], buf
[1], buf
[2]);
3845 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_BRANCH_OUI
, buf
, 3) == 3)
3846 DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
3847 buf
[0], buf
[1], buf
[2]);
3851 intel_dp_probe_mst(struct intel_dp
*intel_dp
)
3855 if (!intel_dp
->can_mst
)
3858 if (intel_dp
->dpcd
[DP_DPCD_REV
] < 0x12)
3861 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_MSTM_CAP
, buf
, 1)) {
3862 if (buf
[0] & DP_MST_CAP
) {
3863 DRM_DEBUG_KMS("Sink is MST capable\n");
3864 intel_dp
->is_mst
= true;
3866 DRM_DEBUG_KMS("Sink is not MST capable\n");
3867 intel_dp
->is_mst
= false;
3871 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
3872 return intel_dp
->is_mst
;
3875 int intel_dp_sink_crc(struct intel_dp
*intel_dp
, u8
*crc
)
3877 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
3878 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
3879 struct intel_crtc
*intel_crtc
=
3880 to_intel_crtc(intel_dig_port
->base
.base
.crtc
);
3885 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK_MISC
, &buf
) < 0)
3888 if (!(buf
& DP_TEST_CRC_SUPPORTED
))
3891 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK
, &buf
) < 0)
3894 if (drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_TEST_SINK
,
3895 buf
| DP_TEST_SINK_START
) < 0)
3898 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK_MISC
, &buf
) < 0)
3900 test_crc_count
= buf
& DP_TEST_COUNT_MASK
;
3903 if (drm_dp_dpcd_readb(&intel_dp
->aux
,
3904 DP_TEST_SINK_MISC
, &buf
) < 0)
3906 intel_wait_for_vblank(dev
, intel_crtc
->pipe
);
3907 } while (--attempts
&& (buf
& DP_TEST_COUNT_MASK
) == test_crc_count
);
3909 if (attempts
== 0) {
3910 DRM_ERROR("Panel is unable to calculate CRC after 6 vblanks\n");
3914 if (drm_dp_dpcd_read(&intel_dp
->aux
, DP_TEST_CRC_R_CR
, crc
, 6) < 0)
3917 if (drm_dp_dpcd_readb(&intel_dp
->aux
, DP_TEST_SINK
, &buf
) < 0)
3919 if (drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_TEST_SINK
,
3920 buf
& ~DP_TEST_SINK_START
) < 0)
3927 intel_dp_get_sink_irq(struct intel_dp
*intel_dp
, u8
*sink_irq_vector
)
3929 return intel_dp_dpcd_read_wake(&intel_dp
->aux
,
3930 DP_DEVICE_SERVICE_IRQ_VECTOR
,
3931 sink_irq_vector
, 1) == 1;
3935 intel_dp_get_sink_irq_esi(struct intel_dp
*intel_dp
, u8
*sink_irq_vector
)
3939 ret
= intel_dp_dpcd_read_wake(&intel_dp
->aux
,
3941 sink_irq_vector
, 14);
3949 intel_dp_handle_test_request(struct intel_dp
*intel_dp
)
3951 /* NAK by default */
3952 drm_dp_dpcd_writeb(&intel_dp
->aux
, DP_TEST_RESPONSE
, DP_TEST_NAK
);
3956 intel_dp_check_mst_status(struct intel_dp
*intel_dp
)
3960 if (intel_dp
->is_mst
) {
3965 bret
= intel_dp_get_sink_irq_esi(intel_dp
, esi
);
3969 /* check link status - esi[10] = 0x200c */
3970 if (intel_dp
->active_mst_links
&& !drm_dp_channel_eq_ok(&esi
[10], intel_dp
->lane_count
)) {
3971 DRM_DEBUG_KMS("channel EQ not ok, retraining\n");
3972 intel_dp_start_link_train(intel_dp
);
3973 intel_dp_complete_link_train(intel_dp
);
3974 intel_dp_stop_link_train(intel_dp
);
3977 DRM_DEBUG_KMS("got esi %02x %02x %02x\n", esi
[0], esi
[1], esi
[2]);
3978 ret
= drm_dp_mst_hpd_irq(&intel_dp
->mst_mgr
, esi
, &handled
);
3981 for (retry
= 0; retry
< 3; retry
++) {
3983 wret
= drm_dp_dpcd_write(&intel_dp
->aux
,
3984 DP_SINK_COUNT_ESI
+1,
3991 bret
= intel_dp_get_sink_irq_esi(intel_dp
, esi
);
3993 DRM_DEBUG_KMS("got esi2 %02x %02x %02x\n", esi
[0], esi
[1], esi
[2]);
4001 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4002 DRM_DEBUG_KMS("failed to get ESI - device may have failed\n");
4003 intel_dp
->is_mst
= false;
4004 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
4005 /* send a hotplug event */
4006 drm_kms_helper_hotplug_event(intel_dig_port
->base
.base
.dev
);
4013 * According to DP spec
4016 * 2. Configure link according to Receiver Capabilities
4017 * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
4018 * 4. Check link status on receipt of hot-plug interrupt
4021 intel_dp_check_link_status(struct intel_dp
*intel_dp
)
4023 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4024 struct intel_encoder
*intel_encoder
= &dp_to_dig_port(intel_dp
)->base
;
4026 u8 link_status
[DP_LINK_STATUS_SIZE
];
4028 WARN_ON(!drm_modeset_is_locked(&dev
->mode_config
.connection_mutex
));
4030 if (!intel_encoder
->connectors_active
)
4033 if (WARN_ON(!intel_encoder
->base
.crtc
))
4036 if (!to_intel_crtc(intel_encoder
->base
.crtc
)->active
)
4039 /* Try to read receiver status if the link appears to be up */
4040 if (!intel_dp_get_link_status(intel_dp
, link_status
)) {
4044 /* Now read the DPCD to see if it's actually running */
4045 if (!intel_dp_get_dpcd(intel_dp
)) {
4049 /* Try to read the source of the interrupt */
4050 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11 &&
4051 intel_dp_get_sink_irq(intel_dp
, &sink_irq_vector
)) {
4052 /* Clear interrupt source */
4053 drm_dp_dpcd_writeb(&intel_dp
->aux
,
4054 DP_DEVICE_SERVICE_IRQ_VECTOR
,
4057 if (sink_irq_vector
& DP_AUTOMATED_TEST_REQUEST
)
4058 intel_dp_handle_test_request(intel_dp
);
4059 if (sink_irq_vector
& (DP_CP_IRQ
| DP_SINK_SPECIFIC_IRQ
))
4060 DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
4063 if (!drm_dp_channel_eq_ok(link_status
, intel_dp
->lane_count
)) {
4064 DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
4065 intel_encoder
->base
.name
);
4066 intel_dp_start_link_train(intel_dp
);
4067 intel_dp_complete_link_train(intel_dp
);
4068 intel_dp_stop_link_train(intel_dp
);
4072 /* XXX this is probably wrong for multiple downstream ports */
4073 static enum drm_connector_status
4074 intel_dp_detect_dpcd(struct intel_dp
*intel_dp
)
4076 uint8_t *dpcd
= intel_dp
->dpcd
;
4079 if (!intel_dp_get_dpcd(intel_dp
))
4080 return connector_status_disconnected
;
4082 /* if there's no downstream port, we're done */
4083 if (!(dpcd
[DP_DOWNSTREAMPORT_PRESENT
] & DP_DWN_STRM_PORT_PRESENT
))
4084 return connector_status_connected
;
4086 /* If we're HPD-aware, SINK_COUNT changes dynamically */
4087 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11 &&
4088 intel_dp
->downstream_ports
[0] & DP_DS_PORT_HPD
) {
4091 if (intel_dp_dpcd_read_wake(&intel_dp
->aux
, DP_SINK_COUNT
,
4093 return connector_status_unknown
;
4095 return DP_GET_SINK_COUNT(reg
) ? connector_status_connected
4096 : connector_status_disconnected
;
4099 /* If no HPD, poke DDC gently */
4100 if (drm_probe_ddc(&intel_dp
->aux
.ddc
))
4101 return connector_status_connected
;
4103 /* Well we tried, say unknown for unreliable port types */
4104 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11) {
4105 type
= intel_dp
->downstream_ports
[0] & DP_DS_PORT_TYPE_MASK
;
4106 if (type
== DP_DS_PORT_TYPE_VGA
||
4107 type
== DP_DS_PORT_TYPE_NON_EDID
)
4108 return connector_status_unknown
;
4110 type
= intel_dp
->dpcd
[DP_DOWNSTREAMPORT_PRESENT
] &
4111 DP_DWN_STRM_PORT_TYPE_MASK
;
4112 if (type
== DP_DWN_STRM_PORT_TYPE_ANALOG
||
4113 type
== DP_DWN_STRM_PORT_TYPE_OTHER
)
4114 return connector_status_unknown
;
4117 /* Anything else is out of spec, warn and ignore */
4118 DRM_DEBUG_KMS("Broken DP branch device, ignoring\n");
4119 return connector_status_disconnected
;
4122 static enum drm_connector_status
4123 edp_detect(struct intel_dp
*intel_dp
)
4125 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4126 enum drm_connector_status status
;
4128 status
= intel_panel_detect(dev
);
4129 if (status
== connector_status_unknown
)
4130 status
= connector_status_connected
;
4135 static enum drm_connector_status
4136 ironlake_dp_detect(struct intel_dp
*intel_dp
)
4138 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4139 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4140 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4142 if (!ibx_digital_port_connected(dev_priv
, intel_dig_port
))
4143 return connector_status_disconnected
;
4145 return intel_dp_detect_dpcd(intel_dp
);
4148 static int g4x_digital_port_connected(struct drm_device
*dev
,
4149 struct intel_digital_port
*intel_dig_port
)
4151 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4154 if (IS_VALLEYVIEW(dev
)) {
4155 switch (intel_dig_port
->port
) {
4157 bit
= PORTB_HOTPLUG_LIVE_STATUS_VLV
;
4160 bit
= PORTC_HOTPLUG_LIVE_STATUS_VLV
;
4163 bit
= PORTD_HOTPLUG_LIVE_STATUS_VLV
;
4169 switch (intel_dig_port
->port
) {
4171 bit
= PORTB_HOTPLUG_LIVE_STATUS_G4X
;
4174 bit
= PORTC_HOTPLUG_LIVE_STATUS_G4X
;
4177 bit
= PORTD_HOTPLUG_LIVE_STATUS_G4X
;
4184 if ((I915_READ(PORT_HOTPLUG_STAT
) & bit
) == 0)
4189 static enum drm_connector_status
4190 g4x_dp_detect(struct intel_dp
*intel_dp
)
4192 struct drm_device
*dev
= intel_dp_to_dev(intel_dp
);
4193 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4196 /* Can't disconnect eDP, but you can close the lid... */
4197 if (is_edp(intel_dp
)) {
4198 enum drm_connector_status status
;
4200 status
= intel_panel_detect(dev
);
4201 if (status
== connector_status_unknown
)
4202 status
= connector_status_connected
;
4206 ret
= g4x_digital_port_connected(dev
, intel_dig_port
);
4208 return connector_status_unknown
;
4210 return connector_status_disconnected
;
4212 return intel_dp_detect_dpcd(intel_dp
);
4215 static struct edid
*
4216 intel_dp_get_edid(struct intel_dp
*intel_dp
)
4218 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4220 /* use cached edid if we have one */
4221 if (intel_connector
->edid
) {
4223 if (IS_ERR(intel_connector
->edid
))
4226 return drm_edid_duplicate(intel_connector
->edid
);
4228 return drm_get_edid(&intel_connector
->base
,
4229 &intel_dp
->aux
.ddc
);
4233 intel_dp_set_edid(struct intel_dp
*intel_dp
)
4235 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4238 edid
= intel_dp_get_edid(intel_dp
);
4239 intel_connector
->detect_edid
= edid
;
4241 if (intel_dp
->force_audio
!= HDMI_AUDIO_AUTO
)
4242 intel_dp
->has_audio
= intel_dp
->force_audio
== HDMI_AUDIO_ON
;
4244 intel_dp
->has_audio
= drm_detect_monitor_audio(edid
);
4248 intel_dp_unset_edid(struct intel_dp
*intel_dp
)
4250 struct intel_connector
*intel_connector
= intel_dp
->attached_connector
;
4252 kfree(intel_connector
->detect_edid
);
4253 intel_connector
->detect_edid
= NULL
;
4255 intel_dp
->has_audio
= false;
4258 static enum intel_display_power_domain
4259 intel_dp_power_get(struct intel_dp
*dp
)
4261 struct intel_encoder
*encoder
= &dp_to_dig_port(dp
)->base
;
4262 enum intel_display_power_domain power_domain
;
4264 power_domain
= intel_display_port_power_domain(encoder
);
4265 intel_display_power_get(to_i915(encoder
->base
.dev
), power_domain
);
4267 return power_domain
;
4271 intel_dp_power_put(struct intel_dp
*dp
,
4272 enum intel_display_power_domain power_domain
)
4274 struct intel_encoder
*encoder
= &dp_to_dig_port(dp
)->base
;
4275 intel_display_power_put(to_i915(encoder
->base
.dev
), power_domain
);
4278 static enum drm_connector_status
4279 intel_dp_detect(struct drm_connector
*connector
, bool force
)
4281 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
4282 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
4283 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
4284 struct drm_device
*dev
= connector
->dev
;
4285 enum drm_connector_status status
;
4286 enum intel_display_power_domain power_domain
;
4289 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4290 connector
->base
.id
, connector
->name
);
4291 intel_dp_unset_edid(intel_dp
);
4293 if (intel_dp
->is_mst
) {
4294 /* MST devices are disconnected from a monitor POV */
4295 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4296 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4297 return connector_status_disconnected
;
4300 power_domain
= intel_dp_power_get(intel_dp
);
4302 /* Can't disconnect eDP, but you can close the lid... */
4303 if (is_edp(intel_dp
))
4304 status
= edp_detect(intel_dp
);
4305 else if (HAS_PCH_SPLIT(dev
))
4306 status
= ironlake_dp_detect(intel_dp
);
4308 status
= g4x_dp_detect(intel_dp
);
4309 if (status
!= connector_status_connected
)
4312 intel_dp_probe_oui(intel_dp
);
4314 ret
= intel_dp_probe_mst(intel_dp
);
4316 /* if we are in MST mode then this connector
4317 won't appear connected or have anything with EDID on it */
4318 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4319 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4320 status
= connector_status_disconnected
;
4324 intel_dp_set_edid(intel_dp
);
4326 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4327 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4328 status
= connector_status_connected
;
4331 intel_dp_power_put(intel_dp
, power_domain
);
4336 intel_dp_force(struct drm_connector
*connector
)
4338 struct intel_dp
*intel_dp
= intel_attached_dp(connector
);
4339 struct intel_encoder
*intel_encoder
= &dp_to_dig_port(intel_dp
)->base
;
4340 enum intel_display_power_domain power_domain
;
4342 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
4343 connector
->base
.id
, connector
->name
);
4344 intel_dp_unset_edid(intel_dp
);
4346 if (connector
->status
!= connector_status_connected
)
4349 power_domain
= intel_dp_power_get(intel_dp
);
4351 intel_dp_set_edid(intel_dp
);
4353 intel_dp_power_put(intel_dp
, power_domain
);
4355 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
4356 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
4359 static int intel_dp_get_modes(struct drm_connector
*connector
)
4361 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4364 edid
= intel_connector
->detect_edid
;
4366 int ret
= intel_connector_update_modes(connector
, edid
);
4371 /* if eDP has no EDID, fall back to fixed mode */
4372 if (is_edp(intel_attached_dp(connector
)) &&
4373 intel_connector
->panel
.fixed_mode
) {
4374 struct drm_display_mode
*mode
;
4376 mode
= drm_mode_duplicate(connector
->dev
,
4377 intel_connector
->panel
.fixed_mode
);
4379 drm_mode_probed_add(connector
, mode
);
4388 intel_dp_detect_audio(struct drm_connector
*connector
)
4390 bool has_audio
= false;
4393 edid
= to_intel_connector(connector
)->detect_edid
;
4395 has_audio
= drm_detect_monitor_audio(edid
);
4401 intel_dp_set_property(struct drm_connector
*connector
,
4402 struct drm_property
*property
,
4405 struct drm_i915_private
*dev_priv
= connector
->dev
->dev_private
;
4406 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4407 struct intel_encoder
*intel_encoder
= intel_attached_encoder(connector
);
4408 struct intel_dp
*intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
4411 ret
= drm_object_property_set_value(&connector
->base
, property
, val
);
4415 if (property
== dev_priv
->force_audio_property
) {
4419 if (i
== intel_dp
->force_audio
)
4422 intel_dp
->force_audio
= i
;
4424 if (i
== HDMI_AUDIO_AUTO
)
4425 has_audio
= intel_dp_detect_audio(connector
);
4427 has_audio
= (i
== HDMI_AUDIO_ON
);
4429 if (has_audio
== intel_dp
->has_audio
)
4432 intel_dp
->has_audio
= has_audio
;
4436 if (property
== dev_priv
->broadcast_rgb_property
) {
4437 bool old_auto
= intel_dp
->color_range_auto
;
4438 uint32_t old_range
= intel_dp
->color_range
;
4441 case INTEL_BROADCAST_RGB_AUTO
:
4442 intel_dp
->color_range_auto
= true;
4444 case INTEL_BROADCAST_RGB_FULL
:
4445 intel_dp
->color_range_auto
= false;
4446 intel_dp
->color_range
= 0;
4448 case INTEL_BROADCAST_RGB_LIMITED
:
4449 intel_dp
->color_range_auto
= false;
4450 intel_dp
->color_range
= DP_COLOR_RANGE_16_235
;
4456 if (old_auto
== intel_dp
->color_range_auto
&&
4457 old_range
== intel_dp
->color_range
)
4463 if (is_edp(intel_dp
) &&
4464 property
== connector
->dev
->mode_config
.scaling_mode_property
) {
4465 if (val
== DRM_MODE_SCALE_NONE
) {
4466 DRM_DEBUG_KMS("no scaling not supported\n");
4470 if (intel_connector
->panel
.fitting_mode
== val
) {
4471 /* the eDP scaling property is not changed */
4474 intel_connector
->panel
.fitting_mode
= val
;
4482 if (intel_encoder
->base
.crtc
)
4483 intel_crtc_restore_mode(intel_encoder
->base
.crtc
);
4489 intel_dp_connector_destroy(struct drm_connector
*connector
)
4491 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4493 kfree(intel_connector
->detect_edid
);
4495 if (!IS_ERR_OR_NULL(intel_connector
->edid
))
4496 kfree(intel_connector
->edid
);
4498 /* Can't call is_edp() since the encoder may have been destroyed
4500 if (connector
->connector_type
== DRM_MODE_CONNECTOR_eDP
)
4501 intel_panel_fini(&intel_connector
->panel
);
4503 drm_connector_cleanup(connector
);
4507 void intel_dp_encoder_destroy(struct drm_encoder
*encoder
)
4509 struct intel_digital_port
*intel_dig_port
= enc_to_dig_port(encoder
);
4510 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
4512 drm_dp_aux_unregister(&intel_dp
->aux
);
4513 intel_dp_mst_encoder_cleanup(intel_dig_port
);
4514 drm_encoder_cleanup(encoder
);
4515 if (is_edp(intel_dp
)) {
4516 cancel_delayed_work_sync(&intel_dp
->panel_vdd_work
);
4518 * vdd might still be enabled do to the delayed vdd off.
4519 * Make sure vdd is actually turned off here.
4522 edp_panel_vdd_off_sync(intel_dp
);
4523 pps_unlock(intel_dp
);
4525 if (intel_dp
->edp_notifier
.notifier_call
) {
4526 unregister_reboot_notifier(&intel_dp
->edp_notifier
);
4527 intel_dp
->edp_notifier
.notifier_call
= NULL
;
4530 kfree(intel_dig_port
);
4533 static void intel_dp_encoder_suspend(struct intel_encoder
*intel_encoder
)
4535 struct intel_dp
*intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
4537 if (!is_edp(intel_dp
))
4541 * vdd might still be enabled do to the delayed vdd off.
4542 * Make sure vdd is actually turned off here.
4545 edp_panel_vdd_off_sync(intel_dp
);
4546 pps_unlock(intel_dp
);
4549 static void intel_dp_encoder_reset(struct drm_encoder
*encoder
)
4551 intel_edp_panel_vdd_sanitize(to_intel_encoder(encoder
));
4554 static const struct drm_connector_funcs intel_dp_connector_funcs
= {
4555 .dpms
= intel_connector_dpms
,
4556 .detect
= intel_dp_detect
,
4557 .force
= intel_dp_force
,
4558 .fill_modes
= drm_helper_probe_single_connector_modes
,
4559 .set_property
= intel_dp_set_property
,
4560 .destroy
= intel_dp_connector_destroy
,
4563 static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs
= {
4564 .get_modes
= intel_dp_get_modes
,
4565 .mode_valid
= intel_dp_mode_valid
,
4566 .best_encoder
= intel_best_encoder
,
4569 static const struct drm_encoder_funcs intel_dp_enc_funcs
= {
4570 .reset
= intel_dp_encoder_reset
,
4571 .destroy
= intel_dp_encoder_destroy
,
4575 intel_dp_hot_plug(struct intel_encoder
*intel_encoder
)
4581 intel_dp_hpd_pulse(struct intel_digital_port
*intel_dig_port
, bool long_hpd
)
4583 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
4584 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
4585 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
4586 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4587 enum intel_display_power_domain power_domain
;
4590 if (intel_dig_port
->base
.type
!= INTEL_OUTPUT_EDP
)
4591 intel_dig_port
->base
.type
= INTEL_OUTPUT_DISPLAYPORT
;
4593 DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
4594 port_name(intel_dig_port
->port
),
4595 long_hpd
? "long" : "short");
4597 power_domain
= intel_display_port_power_domain(intel_encoder
);
4598 intel_display_power_get(dev_priv
, power_domain
);
4602 if (HAS_PCH_SPLIT(dev
)) {
4603 if (!ibx_digital_port_connected(dev_priv
, intel_dig_port
))
4606 if (g4x_digital_port_connected(dev
, intel_dig_port
) != 1)
4610 if (!intel_dp_get_dpcd(intel_dp
)) {
4614 intel_dp_probe_oui(intel_dp
);
4616 if (!intel_dp_probe_mst(intel_dp
))
4620 if (intel_dp
->is_mst
) {
4621 if (intel_dp_check_mst_status(intel_dp
) == -EINVAL
)
4625 if (!intel_dp
->is_mst
) {
4627 * we'll check the link status via the normal hot plug path later -
4628 * but for short hpds we should check it now
4630 drm_modeset_lock(&dev
->mode_config
.connection_mutex
, NULL
);
4631 intel_dp_check_link_status(intel_dp
);
4632 drm_modeset_unlock(&dev
->mode_config
.connection_mutex
);
4638 /* if we were in MST mode, and device is not there get out of MST mode */
4639 if (intel_dp
->is_mst
) {
4640 DRM_DEBUG_KMS("MST device may have disappeared %d vs %d\n", intel_dp
->is_mst
, intel_dp
->mst_mgr
.mst_state
);
4641 intel_dp
->is_mst
= false;
4642 drm_dp_mst_topology_mgr_set_mst(&intel_dp
->mst_mgr
, intel_dp
->is_mst
);
4645 intel_display_power_put(dev_priv
, power_domain
);
4650 /* Return which DP Port should be selected for Transcoder DP control */
4652 intel_trans_dp_port_sel(struct drm_crtc
*crtc
)
4654 struct drm_device
*dev
= crtc
->dev
;
4655 struct intel_encoder
*intel_encoder
;
4656 struct intel_dp
*intel_dp
;
4658 for_each_encoder_on_crtc(dev
, crtc
, intel_encoder
) {
4659 intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
4661 if (intel_encoder
->type
== INTEL_OUTPUT_DISPLAYPORT
||
4662 intel_encoder
->type
== INTEL_OUTPUT_EDP
)
4663 return intel_dp
->output_reg
;
4669 /* check the VBT to see whether the eDP is on DP-D port */
4670 bool intel_dp_is_edp(struct drm_device
*dev
, enum port port
)
4672 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4673 union child_device_config
*p_child
;
4675 static const short port_mapping
[] = {
4676 [PORT_B
] = PORT_IDPB
,
4677 [PORT_C
] = PORT_IDPC
,
4678 [PORT_D
] = PORT_IDPD
,
4684 if (!dev_priv
->vbt
.child_dev_num
)
4687 for (i
= 0; i
< dev_priv
->vbt
.child_dev_num
; i
++) {
4688 p_child
= dev_priv
->vbt
.child_dev
+ i
;
4690 if (p_child
->common
.dvo_port
== port_mapping
[port
] &&
4691 (p_child
->common
.device_type
& DEVICE_TYPE_eDP_BITS
) ==
4692 (DEVICE_TYPE_eDP
& DEVICE_TYPE_eDP_BITS
))
4699 intel_dp_add_properties(struct intel_dp
*intel_dp
, struct drm_connector
*connector
)
4701 struct intel_connector
*intel_connector
= to_intel_connector(connector
);
4703 intel_attach_force_audio_property(connector
);
4704 intel_attach_broadcast_rgb_property(connector
);
4705 intel_dp
->color_range_auto
= true;
4707 if (is_edp(intel_dp
)) {
4708 drm_mode_create_scaling_mode_property(connector
->dev
);
4709 drm_object_attach_property(
4711 connector
->dev
->mode_config
.scaling_mode_property
,
4712 DRM_MODE_SCALE_ASPECT
);
4713 intel_connector
->panel
.fitting_mode
= DRM_MODE_SCALE_ASPECT
;
4717 static void intel_dp_init_panel_power_timestamps(struct intel_dp
*intel_dp
)
4719 intel_dp
->last_power_cycle
= jiffies
;
4720 intel_dp
->last_power_on
= jiffies
;
4721 intel_dp
->last_backlight_off
= jiffies
;
4725 intel_dp_init_panel_power_sequencer(struct drm_device
*dev
,
4726 struct intel_dp
*intel_dp
)
4728 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4729 struct edp_power_seq cur
, vbt
, spec
,
4730 *final
= &intel_dp
->pps_delays
;
4731 u32 pp_on
, pp_off
, pp_div
, pp
;
4732 int pp_ctrl_reg
, pp_on_reg
, pp_off_reg
, pp_div_reg
;
4734 lockdep_assert_held(&dev_priv
->pps_mutex
);
4736 /* already initialized? */
4737 if (final
->t11_t12
!= 0)
4740 if (HAS_PCH_SPLIT(dev
)) {
4741 pp_ctrl_reg
= PCH_PP_CONTROL
;
4742 pp_on_reg
= PCH_PP_ON_DELAYS
;
4743 pp_off_reg
= PCH_PP_OFF_DELAYS
;
4744 pp_div_reg
= PCH_PP_DIVISOR
;
4746 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
4748 pp_ctrl_reg
= VLV_PIPE_PP_CONTROL(pipe
);
4749 pp_on_reg
= VLV_PIPE_PP_ON_DELAYS(pipe
);
4750 pp_off_reg
= VLV_PIPE_PP_OFF_DELAYS(pipe
);
4751 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
4754 /* Workaround: Need to write PP_CONTROL with the unlock key as
4755 * the very first thing. */
4756 pp
= ironlake_get_pp_control(intel_dp
);
4757 I915_WRITE(pp_ctrl_reg
, pp
);
4759 pp_on
= I915_READ(pp_on_reg
);
4760 pp_off
= I915_READ(pp_off_reg
);
4761 pp_div
= I915_READ(pp_div_reg
);
4763 /* Pull timing values out of registers */
4764 cur
.t1_t3
= (pp_on
& PANEL_POWER_UP_DELAY_MASK
) >>
4765 PANEL_POWER_UP_DELAY_SHIFT
;
4767 cur
.t8
= (pp_on
& PANEL_LIGHT_ON_DELAY_MASK
) >>
4768 PANEL_LIGHT_ON_DELAY_SHIFT
;
4770 cur
.t9
= (pp_off
& PANEL_LIGHT_OFF_DELAY_MASK
) >>
4771 PANEL_LIGHT_OFF_DELAY_SHIFT
;
4773 cur
.t10
= (pp_off
& PANEL_POWER_DOWN_DELAY_MASK
) >>
4774 PANEL_POWER_DOWN_DELAY_SHIFT
;
4776 cur
.t11_t12
= ((pp_div
& PANEL_POWER_CYCLE_DELAY_MASK
) >>
4777 PANEL_POWER_CYCLE_DELAY_SHIFT
) * 1000;
4779 DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
4780 cur
.t1_t3
, cur
.t8
, cur
.t9
, cur
.t10
, cur
.t11_t12
);
4782 vbt
= dev_priv
->vbt
.edp_pps
;
4784 /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
4785 * our hw here, which are all in 100usec. */
4786 spec
.t1_t3
= 210 * 10;
4787 spec
.t8
= 50 * 10; /* no limit for t8, use t7 instead */
4788 spec
.t9
= 50 * 10; /* no limit for t9, make it symmetric with t8 */
4789 spec
.t10
= 500 * 10;
4790 /* This one is special and actually in units of 100ms, but zero
4791 * based in the hw (so we need to add 100 ms). But the sw vbt
4792 * table multiplies it with 1000 to make it in units of 100usec,
4794 spec
.t11_t12
= (510 + 100) * 10;
4796 DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
4797 vbt
.t1_t3
, vbt
.t8
, vbt
.t9
, vbt
.t10
, vbt
.t11_t12
);
4799 /* Use the max of the register settings and vbt. If both are
4800 * unset, fall back to the spec limits. */
4801 #define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \
4803 max(cur.field, vbt.field))
4804 assign_final(t1_t3
);
4808 assign_final(t11_t12
);
4811 #define get_delay(field) (DIV_ROUND_UP(final->field, 10))
4812 intel_dp
->panel_power_up_delay
= get_delay(t1_t3
);
4813 intel_dp
->backlight_on_delay
= get_delay(t8
);
4814 intel_dp
->backlight_off_delay
= get_delay(t9
);
4815 intel_dp
->panel_power_down_delay
= get_delay(t10
);
4816 intel_dp
->panel_power_cycle_delay
= get_delay(t11_t12
);
4819 DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n",
4820 intel_dp
->panel_power_up_delay
, intel_dp
->panel_power_down_delay
,
4821 intel_dp
->panel_power_cycle_delay
);
4823 DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
4824 intel_dp
->backlight_on_delay
, intel_dp
->backlight_off_delay
);
4828 intel_dp_init_panel_power_sequencer_registers(struct drm_device
*dev
,
4829 struct intel_dp
*intel_dp
)
4831 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4832 u32 pp_on
, pp_off
, pp_div
, port_sel
= 0;
4833 int div
= HAS_PCH_SPLIT(dev
) ? intel_pch_rawclk(dev
) : intel_hrawclk(dev
);
4834 int pp_on_reg
, pp_off_reg
, pp_div_reg
;
4835 enum port port
= dp_to_dig_port(intel_dp
)->port
;
4836 const struct edp_power_seq
*seq
= &intel_dp
->pps_delays
;
4838 lockdep_assert_held(&dev_priv
->pps_mutex
);
4840 if (HAS_PCH_SPLIT(dev
)) {
4841 pp_on_reg
= PCH_PP_ON_DELAYS
;
4842 pp_off_reg
= PCH_PP_OFF_DELAYS
;
4843 pp_div_reg
= PCH_PP_DIVISOR
;
4845 enum pipe pipe
= vlv_power_sequencer_pipe(intel_dp
);
4847 pp_on_reg
= VLV_PIPE_PP_ON_DELAYS(pipe
);
4848 pp_off_reg
= VLV_PIPE_PP_OFF_DELAYS(pipe
);
4849 pp_div_reg
= VLV_PIPE_PP_DIVISOR(pipe
);
4853 * And finally store the new values in the power sequencer. The
4854 * backlight delays are set to 1 because we do manual waits on them. For
4855 * T8, even BSpec recommends doing it. For T9, if we don't do this,
4856 * we'll end up waiting for the backlight off delay twice: once when we
4857 * do the manual sleep, and once when we disable the panel and wait for
4858 * the PP_STATUS bit to become zero.
4860 pp_on
= (seq
->t1_t3
<< PANEL_POWER_UP_DELAY_SHIFT
) |
4861 (1 << PANEL_LIGHT_ON_DELAY_SHIFT
);
4862 pp_off
= (1 << PANEL_LIGHT_OFF_DELAY_SHIFT
) |
4863 (seq
->t10
<< PANEL_POWER_DOWN_DELAY_SHIFT
);
4864 /* Compute the divisor for the pp clock, simply match the Bspec
4866 pp_div
= ((100 * div
)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT
;
4867 pp_div
|= (DIV_ROUND_UP(seq
->t11_t12
, 1000)
4868 << PANEL_POWER_CYCLE_DELAY_SHIFT
);
4870 /* Haswell doesn't have any port selection bits for the panel
4871 * power sequencer any more. */
4872 if (IS_VALLEYVIEW(dev
)) {
4873 port_sel
= PANEL_PORT_SELECT_VLV(port
);
4874 } else if (HAS_PCH_IBX(dev
) || HAS_PCH_CPT(dev
)) {
4876 port_sel
= PANEL_PORT_SELECT_DPA
;
4878 port_sel
= PANEL_PORT_SELECT_DPD
;
4883 I915_WRITE(pp_on_reg
, pp_on
);
4884 I915_WRITE(pp_off_reg
, pp_off
);
4885 I915_WRITE(pp_div_reg
, pp_div
);
4887 DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
4888 I915_READ(pp_on_reg
),
4889 I915_READ(pp_off_reg
),
4890 I915_READ(pp_div_reg
));
4893 void intel_dp_set_drrs_state(struct drm_device
*dev
, int refresh_rate
)
4895 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4896 struct intel_encoder
*encoder
;
4897 struct intel_dp
*intel_dp
= NULL
;
4898 struct intel_crtc_config
*config
= NULL
;
4899 struct intel_crtc
*intel_crtc
= NULL
;
4900 struct intel_connector
*intel_connector
= dev_priv
->drrs
.connector
;
4902 enum edp_drrs_refresh_rate_type index
= DRRS_HIGH_RR
;
4904 if (refresh_rate
<= 0) {
4905 DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
4909 if (intel_connector
== NULL
) {
4910 DRM_DEBUG_KMS("DRRS supported for eDP only.\n");
4915 * FIXME: This needs proper synchronization with psr state. But really
4916 * hard to tell without seeing the user of this function of this code.
4917 * Check locking and ordering once that lands.
4919 if (INTEL_INFO(dev
)->gen
< 8 && intel_edp_is_psr_enabled(dev
)) {
4920 DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n");
4924 encoder
= intel_attached_encoder(&intel_connector
->base
);
4925 intel_dp
= enc_to_intel_dp(&encoder
->base
);
4926 intel_crtc
= encoder
->new_crtc
;
4929 DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
4933 config
= &intel_crtc
->config
;
4935 if (intel_dp
->drrs_state
.type
< SEAMLESS_DRRS_SUPPORT
) {
4936 DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
4940 if (intel_connector
->panel
.downclock_mode
->vrefresh
== refresh_rate
)
4941 index
= DRRS_LOW_RR
;
4943 if (index
== intel_dp
->drrs_state
.refresh_rate_type
) {
4945 "DRRS requested for previously set RR...ignoring\n");
4949 if (!intel_crtc
->active
) {
4950 DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
4954 if (INTEL_INFO(dev
)->gen
> 6 && INTEL_INFO(dev
)->gen
< 8) {
4955 reg
= PIPECONF(intel_crtc
->config
.cpu_transcoder
);
4956 val
= I915_READ(reg
);
4957 if (index
> DRRS_HIGH_RR
) {
4958 val
|= PIPECONF_EDP_RR_MODE_SWITCH
;
4959 intel_dp_set_m_n(intel_crtc
);
4961 val
&= ~PIPECONF_EDP_RR_MODE_SWITCH
;
4963 I915_WRITE(reg
, val
);
4967 * mutex taken to ensure that there is no race between differnt
4968 * drrs calls trying to update refresh rate. This scenario may occur
4969 * in future when idleness detection based DRRS in kernel and
4970 * possible calls from user space to set differnt RR are made.
4973 mutex_lock(&intel_dp
->drrs_state
.mutex
);
4975 intel_dp
->drrs_state
.refresh_rate_type
= index
;
4977 mutex_unlock(&intel_dp
->drrs_state
.mutex
);
4979 DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate
);
4982 static struct drm_display_mode
*
4983 intel_dp_drrs_init(struct intel_digital_port
*intel_dig_port
,
4984 struct intel_connector
*intel_connector
,
4985 struct drm_display_mode
*fixed_mode
)
4987 struct drm_connector
*connector
= &intel_connector
->base
;
4988 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
4989 struct drm_device
*dev
= intel_dig_port
->base
.base
.dev
;
4990 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
4991 struct drm_display_mode
*downclock_mode
= NULL
;
4993 if (INTEL_INFO(dev
)->gen
<= 6) {
4994 DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
4998 if (dev_priv
->vbt
.drrs_type
!= SEAMLESS_DRRS_SUPPORT
) {
4999 DRM_DEBUG_KMS("VBT doesn't support DRRS\n");
5003 downclock_mode
= intel_find_panel_downclock
5004 (dev
, fixed_mode
, connector
);
5006 if (!downclock_mode
) {
5007 DRM_DEBUG_KMS("DRRS not supported\n");
5011 dev_priv
->drrs
.connector
= intel_connector
;
5013 mutex_init(&intel_dp
->drrs_state
.mutex
);
5015 intel_dp
->drrs_state
.type
= dev_priv
->vbt
.drrs_type
;
5017 intel_dp
->drrs_state
.refresh_rate_type
= DRRS_HIGH_RR
;
5018 DRM_DEBUG_KMS("seamless DRRS supported for eDP panel.\n");
5019 return downclock_mode
;
5022 void intel_edp_panel_vdd_sanitize(struct intel_encoder
*intel_encoder
)
5024 struct drm_device
*dev
= intel_encoder
->base
.dev
;
5025 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5026 struct intel_dp
*intel_dp
;
5027 enum intel_display_power_domain power_domain
;
5029 if (intel_encoder
->type
!= INTEL_OUTPUT_EDP
)
5032 intel_dp
= enc_to_intel_dp(&intel_encoder
->base
);
5036 if (!edp_have_panel_vdd(intel_dp
))
5039 * The VDD bit needs a power domain reference, so if the bit is
5040 * already enabled when we boot or resume, grab this reference and
5041 * schedule a vdd off, so we don't hold on to the reference
5044 DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
5045 power_domain
= intel_display_port_power_domain(intel_encoder
);
5046 intel_display_power_get(dev_priv
, power_domain
);
5048 edp_panel_vdd_schedule_off(intel_dp
);
5050 pps_unlock(intel_dp
);
5053 static bool intel_edp_init_connector(struct intel_dp
*intel_dp
,
5054 struct intel_connector
*intel_connector
)
5056 struct drm_connector
*connector
= &intel_connector
->base
;
5057 struct intel_digital_port
*intel_dig_port
= dp_to_dig_port(intel_dp
);
5058 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
5059 struct drm_device
*dev
= intel_encoder
->base
.dev
;
5060 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5061 struct drm_display_mode
*fixed_mode
= NULL
;
5062 struct drm_display_mode
*downclock_mode
= NULL
;
5064 struct drm_display_mode
*scan
;
5067 intel_dp
->drrs_state
.type
= DRRS_NOT_SUPPORTED
;
5069 if (!is_edp(intel_dp
))
5072 intel_edp_panel_vdd_sanitize(intel_encoder
);
5074 /* Cache DPCD and EDID for edp. */
5075 has_dpcd
= intel_dp_get_dpcd(intel_dp
);
5078 if (intel_dp
->dpcd
[DP_DPCD_REV
] >= 0x11)
5079 dev_priv
->no_aux_handshake
=
5080 intel_dp
->dpcd
[DP_MAX_DOWNSPREAD
] &
5081 DP_NO_AUX_HANDSHAKE_LINK_TRAINING
;
5083 /* if this fails, presume the device is a ghost */
5084 DRM_INFO("failed to retrieve link info, disabling eDP\n");
5088 /* We now know it's not a ghost, init power sequence regs. */
5090 intel_dp_init_panel_power_sequencer_registers(dev
, intel_dp
);
5091 pps_unlock(intel_dp
);
5093 mutex_lock(&dev
->mode_config
.mutex
);
5094 edid
= drm_get_edid(connector
, &intel_dp
->aux
.ddc
);
5096 if (drm_add_edid_modes(connector
, edid
)) {
5097 drm_mode_connector_update_edid_property(connector
,
5099 drm_edid_to_eld(connector
, edid
);
5102 edid
= ERR_PTR(-EINVAL
);
5105 edid
= ERR_PTR(-ENOENT
);
5107 intel_connector
->edid
= edid
;
5109 /* prefer fixed mode from EDID if available */
5110 list_for_each_entry(scan
, &connector
->probed_modes
, head
) {
5111 if ((scan
->type
& DRM_MODE_TYPE_PREFERRED
)) {
5112 fixed_mode
= drm_mode_duplicate(dev
, scan
);
5113 downclock_mode
= intel_dp_drrs_init(
5115 intel_connector
, fixed_mode
);
5120 /* fallback to VBT if available for eDP */
5121 if (!fixed_mode
&& dev_priv
->vbt
.lfp_lvds_vbt_mode
) {
5122 fixed_mode
= drm_mode_duplicate(dev
,
5123 dev_priv
->vbt
.lfp_lvds_vbt_mode
);
5125 fixed_mode
->type
|= DRM_MODE_TYPE_PREFERRED
;
5127 mutex_unlock(&dev
->mode_config
.mutex
);
5129 if (IS_VALLEYVIEW(dev
)) {
5130 intel_dp
->edp_notifier
.notifier_call
= edp_notify_handler
;
5131 register_reboot_notifier(&intel_dp
->edp_notifier
);
5134 intel_panel_init(&intel_connector
->panel
, fixed_mode
, downclock_mode
);
5135 intel_connector
->panel
.backlight_power
= intel_edp_backlight_power
;
5136 intel_panel_setup_backlight(connector
);
5142 intel_dp_init_connector(struct intel_digital_port
*intel_dig_port
,
5143 struct intel_connector
*intel_connector
)
5145 struct drm_connector
*connector
= &intel_connector
->base
;
5146 struct intel_dp
*intel_dp
= &intel_dig_port
->dp
;
5147 struct intel_encoder
*intel_encoder
= &intel_dig_port
->base
;
5148 struct drm_device
*dev
= intel_encoder
->base
.dev
;
5149 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5150 enum port port
= intel_dig_port
->port
;
5153 intel_dp
->pps_pipe
= INVALID_PIPE
;
5155 /* intel_dp vfuncs */
5156 if (INTEL_INFO(dev
)->gen
>= 9)
5157 intel_dp
->get_aux_clock_divider
= skl_get_aux_clock_divider
;
5158 else if (IS_VALLEYVIEW(dev
))
5159 intel_dp
->get_aux_clock_divider
= vlv_get_aux_clock_divider
;
5160 else if (IS_HASWELL(dev
) || IS_BROADWELL(dev
))
5161 intel_dp
->get_aux_clock_divider
= hsw_get_aux_clock_divider
;
5162 else if (HAS_PCH_SPLIT(dev
))
5163 intel_dp
->get_aux_clock_divider
= ilk_get_aux_clock_divider
;
5165 intel_dp
->get_aux_clock_divider
= i9xx_get_aux_clock_divider
;
5167 if (INTEL_INFO(dev
)->gen
>= 9)
5168 intel_dp
->get_aux_send_ctl
= skl_get_aux_send_ctl
;
5170 intel_dp
->get_aux_send_ctl
= i9xx_get_aux_send_ctl
;
5172 /* Preserve the current hw state. */
5173 intel_dp
->DP
= I915_READ(intel_dp
->output_reg
);
5174 intel_dp
->attached_connector
= intel_connector
;
5176 if (intel_dp_is_edp(dev
, port
))
5177 type
= DRM_MODE_CONNECTOR_eDP
;
5179 type
= DRM_MODE_CONNECTOR_DisplayPort
;
5182 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
5183 * for DP the encoder type can be set by the caller to
5184 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
5186 if (type
== DRM_MODE_CONNECTOR_eDP
)
5187 intel_encoder
->type
= INTEL_OUTPUT_EDP
;
5189 /* eDP only on port B and/or C on vlv/chv */
5190 if (WARN_ON(IS_VALLEYVIEW(dev
) && is_edp(intel_dp
) &&
5191 port
!= PORT_B
&& port
!= PORT_C
))
5194 DRM_DEBUG_KMS("Adding %s connector on port %c\n",
5195 type
== DRM_MODE_CONNECTOR_eDP
? "eDP" : "DP",
5198 drm_connector_init(dev
, connector
, &intel_dp_connector_funcs
, type
);
5199 drm_connector_helper_add(connector
, &intel_dp_connector_helper_funcs
);
5201 connector
->interlace_allowed
= true;
5202 connector
->doublescan_allowed
= 0;
5204 INIT_DELAYED_WORK(&intel_dp
->panel_vdd_work
,
5205 edp_panel_vdd_work
);
5207 intel_connector_attach_encoder(intel_connector
, intel_encoder
);
5208 drm_connector_register(connector
);
5211 intel_connector
->get_hw_state
= intel_ddi_connector_get_hw_state
;
5213 intel_connector
->get_hw_state
= intel_connector_get_hw_state
;
5214 intel_connector
->unregister
= intel_dp_connector_unregister
;
5216 /* Set up the hotplug pin. */
5219 intel_encoder
->hpd_pin
= HPD_PORT_A
;
5222 intel_encoder
->hpd_pin
= HPD_PORT_B
;
5225 intel_encoder
->hpd_pin
= HPD_PORT_C
;
5228 intel_encoder
->hpd_pin
= HPD_PORT_D
;
5234 if (is_edp(intel_dp
)) {
5236 if (IS_VALLEYVIEW(dev
)) {
5237 vlv_initial_power_sequencer_setup(intel_dp
);
5239 intel_dp_init_panel_power_timestamps(intel_dp
);
5240 intel_dp_init_panel_power_sequencer(dev
, intel_dp
);
5242 pps_unlock(intel_dp
);
5245 intel_dp_aux_init(intel_dp
, intel_connector
);
5247 /* init MST on ports that can support it */
5248 if (IS_HASWELL(dev
) || IS_BROADWELL(dev
)) {
5249 if (port
== PORT_B
|| port
== PORT_C
|| port
== PORT_D
) {
5250 intel_dp_mst_encoder_init(intel_dig_port
,
5251 intel_connector
->base
.base
.id
);
5255 if (!intel_edp_init_connector(intel_dp
, intel_connector
)) {
5256 drm_dp_aux_unregister(&intel_dp
->aux
);
5257 if (is_edp(intel_dp
)) {
5258 cancel_delayed_work_sync(&intel_dp
->panel_vdd_work
);
5260 * vdd might still be enabled do to the delayed vdd off.
5261 * Make sure vdd is actually turned off here.
5264 edp_panel_vdd_off_sync(intel_dp
);
5265 pps_unlock(intel_dp
);
5267 drm_connector_unregister(connector
);
5268 drm_connector_cleanup(connector
);
5272 intel_dp_add_properties(intel_dp
, connector
);
5274 /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
5275 * 0xd. Failure to do so will result in spurious interrupts being
5276 * generated on the port when a cable is not attached.
5278 if (IS_G4X(dev
) && !IS_GM45(dev
)) {
5279 u32 temp
= I915_READ(PEG_BAND_GAP_DATA
);
5280 I915_WRITE(PEG_BAND_GAP_DATA
, (temp
& ~0xf) | 0xd);
5287 intel_dp_init(struct drm_device
*dev
, int output_reg
, enum port port
)
5289 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5290 struct intel_digital_port
*intel_dig_port
;
5291 struct intel_encoder
*intel_encoder
;
5292 struct drm_encoder
*encoder
;
5293 struct intel_connector
*intel_connector
;
5295 intel_dig_port
= kzalloc(sizeof(*intel_dig_port
), GFP_KERNEL
);
5296 if (!intel_dig_port
)
5299 intel_connector
= kzalloc(sizeof(*intel_connector
), GFP_KERNEL
);
5300 if (!intel_connector
) {
5301 kfree(intel_dig_port
);
5305 intel_encoder
= &intel_dig_port
->base
;
5306 encoder
= &intel_encoder
->base
;
5308 drm_encoder_init(dev
, &intel_encoder
->base
, &intel_dp_enc_funcs
,
5309 DRM_MODE_ENCODER_TMDS
);
5311 intel_encoder
->compute_config
= intel_dp_compute_config
;
5312 intel_encoder
->disable
= intel_disable_dp
;
5313 intel_encoder
->get_hw_state
= intel_dp_get_hw_state
;
5314 intel_encoder
->get_config
= intel_dp_get_config
;
5315 intel_encoder
->suspend
= intel_dp_encoder_suspend
;
5316 if (IS_CHERRYVIEW(dev
)) {
5317 intel_encoder
->pre_pll_enable
= chv_dp_pre_pll_enable
;
5318 intel_encoder
->pre_enable
= chv_pre_enable_dp
;
5319 intel_encoder
->enable
= vlv_enable_dp
;
5320 intel_encoder
->post_disable
= chv_post_disable_dp
;
5321 } else if (IS_VALLEYVIEW(dev
)) {
5322 intel_encoder
->pre_pll_enable
= vlv_dp_pre_pll_enable
;
5323 intel_encoder
->pre_enable
= vlv_pre_enable_dp
;
5324 intel_encoder
->enable
= vlv_enable_dp
;
5325 intel_encoder
->post_disable
= vlv_post_disable_dp
;
5327 intel_encoder
->pre_enable
= g4x_pre_enable_dp
;
5328 intel_encoder
->enable
= g4x_enable_dp
;
5329 if (INTEL_INFO(dev
)->gen
>= 5)
5330 intel_encoder
->post_disable
= ilk_post_disable_dp
;
5333 intel_dig_port
->port
= port
;
5334 intel_dig_port
->dp
.output_reg
= output_reg
;
5336 intel_encoder
->type
= INTEL_OUTPUT_DISPLAYPORT
;
5337 if (IS_CHERRYVIEW(dev
)) {
5339 intel_encoder
->crtc_mask
= 1 << 2;
5341 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1);
5343 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1) | (1 << 2);
5345 intel_encoder
->cloneable
= 0;
5346 intel_encoder
->hot_plug
= intel_dp_hot_plug
;
5348 intel_dig_port
->hpd_pulse
= intel_dp_hpd_pulse
;
5349 dev_priv
->hpd_irq_port
[port
] = intel_dig_port
;
5351 if (!intel_dp_init_connector(intel_dig_port
, intel_connector
)) {
5352 drm_encoder_cleanup(encoder
);
5353 kfree(intel_dig_port
);
5354 kfree(intel_connector
);
5358 void intel_dp_mst_suspend(struct drm_device
*dev
)
5360 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5364 for (i
= 0; i
< I915_MAX_PORTS
; i
++) {
5365 struct intel_digital_port
*intel_dig_port
= dev_priv
->hpd_irq_port
[i
];
5366 if (!intel_dig_port
)
5369 if (intel_dig_port
->base
.type
== INTEL_OUTPUT_DISPLAYPORT
) {
5370 if (!intel_dig_port
->dp
.can_mst
)
5372 if (intel_dig_port
->dp
.is_mst
)
5373 drm_dp_mst_topology_mgr_suspend(&intel_dig_port
->dp
.mst_mgr
);
5378 void intel_dp_mst_resume(struct drm_device
*dev
)
5380 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
5383 for (i
= 0; i
< I915_MAX_PORTS
; i
++) {
5384 struct intel_digital_port
*intel_dig_port
= dev_priv
->hpd_irq_port
[i
];
5385 if (!intel_dig_port
)
5387 if (intel_dig_port
->base
.type
== INTEL_OUTPUT_DISPLAYPORT
) {
5390 if (!intel_dig_port
->dp
.can_mst
)
5393 ret
= drm_dp_mst_topology_mgr_resume(&intel_dig_port
->dp
.mst_mgr
);
5395 intel_dp_check_mst_status(&intel_dig_port
->dp
);