drivers/gpu/drm/i915/intel_dvo.c

   1 /*
   2  * Copyright 2006 Dave Airlie <airlied@linux.ie>
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  */
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29 #include <drm/drmP.h>
  30 #include <drm/drm_crtc.h>
  31 #include "intel_drv.h"
  32 #include <drm/i915_drm.h>
  33 #include "i915_drv.h"
  34 #include "dvo.h"
  35
  36 #define SIL164_ADDR     0x38
  37 #define CH7xxx_ADDR     0x76
  38 #define TFP410_ADDR     0x38
  39 #define NS2501_ADDR     0x38
  40
  41 static const struct intel_dvo_device intel_dvo_devices[] = {
  42         {
  43                 .type = INTEL_DVO_CHIP_TMDS,
  44                 .name = "sil164",
  45                 .dvo_reg = DVOC,
  46                 .slave_addr = SIL164_ADDR,
  47                 .dev_ops = &sil164_ops,
  48         },
  49         {
  50                 .type = INTEL_DVO_CHIP_TMDS,
  51                 .name = "ch7xxx",
  52                 .dvo_reg = DVOC,
  53                 .slave_addr = CH7xxx_ADDR,
  54                 .dev_ops = &ch7xxx_ops,
  55         },
  56         {
  57                 .type = INTEL_DVO_CHIP_TMDS,
  58                 .name = "ch7xxx",
  59                 .dvo_reg = DVOC,
  60                 .slave_addr = 0x75, /* For some ch7010 */
  61                 .dev_ops = &ch7xxx_ops,
  62         },
  63         {
  64                 .type = INTEL_DVO_CHIP_LVDS,
  65                 .name = "ivch",
  66                 .dvo_reg = DVOA,
  67                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  68                 .dev_ops = &ivch_ops,
  69         },
  70         {
  71                 .type = INTEL_DVO_CHIP_TMDS,
  72                 .name = "tfp410",
  73                 .dvo_reg = DVOC,
  74                 .slave_addr = TFP410_ADDR,
  75                 .dev_ops = &tfp410_ops,
  76         },
  77         {
  78                 .type = INTEL_DVO_CHIP_LVDS,
  79                 .name = "ch7017",
  80                 .dvo_reg = DVOC,
  81                 .slave_addr = 0x75,
  82                 .gpio = GMBUS_PORT_DPB,
  83                 .dev_ops = &ch7017_ops,
  84         },
  85         {
  86                 .type = INTEL_DVO_CHIP_TMDS,
  87                 .name = "ns2501",
  88                 .dvo_reg = DVOB,
  89                 .slave_addr = NS2501_ADDR,
  90                 .dev_ops = &ns2501_ops,
  91        }
  92 };
  93
  94 struct intel_dvo {
  95         struct intel_encoder base;
  96
  97         struct intel_dvo_device dev;
  98
  99         struct drm_display_mode *panel_fixed_mode;
 100         bool panel_wants_dither;
 101 };
 102
 103 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
 104 {
 105         return container_of(encoder, struct intel_dvo, base);
 106 }
 107
 108 static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
 109 {
 110         return enc_to_dvo(intel_attached_encoder(connector));
 111 }
 112
 113 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 114 {
 115         struct drm_device *dev = connector->base.dev;
 116         struct drm_i915_private *dev_priv = dev->dev_private;
 117         struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
 118         u32 tmp;
 119
 120         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 121
 122         if (!(tmp & DVO_ENABLE))
 123                 return false;
 124
 125         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
 126 }
 127
 128 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
 129                                    enum pipe *pipe)
 130 {
 131         struct drm_device *dev = encoder->base.dev;
 132         struct drm_i915_private *dev_priv = dev->dev_private;
 133         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 134         u32 tmp;
 135
 136         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 137
 138         if (!(tmp & DVO_ENABLE))
 139                 return false;
 140
 141         *pipe = PORT_TO_PIPE(tmp);
 142
 143         return true;
 144 }
 145
 146 static void intel_dvo_get_config(struct intel_encoder *encoder,
 147                                  struct intel_crtc_state *pipe_config)
 148 {
 149         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 150         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 151         u32 tmp, flags = 0;
 152
 153         tmp = I915_READ(intel_dvo->dev.dvo_reg);
 154         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 155                 flags |= DRM_MODE_FLAG_PHSYNC;
 156         else
 157                 flags |= DRM_MODE_FLAG_NHSYNC;
 158         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
 159                 flags |= DRM_MODE_FLAG_PVSYNC;
 160         else
 161                 flags |= DRM_MODE_FLAG_NVSYNC;
 162
 163         pipe_config->base.adjusted_mode.flags |= flags;
 164
 165         pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
 166 }
 167
 168 static void intel_disable_dvo(struct intel_encoder *encoder)
 169 {
 170         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 171         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 172         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 173         u32 temp = I915_READ(dvo_reg);
 174
 175         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 176         I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
 177         I915_READ(dvo_reg);
 178 }
 179
 180 static void intel_enable_dvo(struct intel_encoder *encoder)
 181 {
 182         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 183         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 184         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 185         u32 dvo_reg = intel_dvo->dev.dvo_reg;
 186         u32 temp = I915_READ(dvo_reg);
 187
 188         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 189                                          &crtc->config.base.mode,
 190                                          &crtc->config.base.adjusted_mode);
 191
 192         I915_WRITE(dvo_reg, temp | DVO_ENABLE);
 193         I915_READ(dvo_reg);
 194
 195         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 196 }
 197
 198 /* Special dpms function to support cloning between dvo/sdvo/crt. */
 199 static void intel_dvo_dpms(struct drm_connector *connector, int mode)
 200 {
 201         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 202         struct drm_crtc *crtc;
 203         struct intel_crtc_state *config;
 204
 205         /* dvo supports only 2 dpms states. */
 206         if (mode != DRM_MODE_DPMS_ON)
 207                 mode = DRM_MODE_DPMS_OFF;
 208
 209         if (mode == connector->dpms)
 210                 return;
 211
 212         connector->dpms = mode;
 213
 214         /* Only need to change hw state when actually enabled */
 215         crtc = intel_dvo->base.base.crtc;
 216         if (!crtc) {
 217                 intel_dvo->base.connectors_active = false;
 218                 return;
 219         }
 220
 221         /* We call connector dpms manually below in case pipe dpms doesn't
 222          * change due to cloning. */
 223         if (mode == DRM_MODE_DPMS_ON) {
 224                 config = &to_intel_crtc(crtc)->config;
 225
 226                 intel_dvo->base.connectors_active = true;
 227
 228                 intel_crtc_update_dpms(crtc);
 229
 230                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 231         } else {
 232                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 233
 234                 intel_dvo->base.connectors_active = false;
 235
 236                 intel_crtc_update_dpms(crtc);
 237         }
 238
 239         intel_modeset_check_state(connector->dev);
 240 }
 241
 242 static enum drm_mode_status
 243 intel_dvo_mode_valid(struct drm_connector *connector,
 244                      struct drm_display_mode *mode)
 245 {
 246         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 247
 248         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 249                 return MODE_NO_DBLESCAN;
 250
 251         /* XXX: Validate clock range */
 252
 253         if (intel_dvo->panel_fixed_mode) {
 254                 if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
 255                         return MODE_PANEL;
 256                 if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
 257                         return MODE_PANEL;
 258         }
 259
 260         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 261 }
 262
 263 static bool intel_dvo_compute_config(struct intel_encoder *encoder,
 264                                      struct intel_crtc_state *pipe_config)
 265 {
 266         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 267         struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
 268
 269         /* If we have timings from the BIOS for the panel, put them in
 270          * to the adjusted mode.  The CRTC will be set up for this mode,
 271          * with the panel scaling set up to source from the H/VDisplay
 272          * of the original mode.
 273          */
 274         if (intel_dvo->panel_fixed_mode != NULL) {
 275 #define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
 276                 C(hdisplay);
 277                 C(hsync_start);
 278                 C(hsync_end);
 279                 C(htotal);
 280                 C(vdisplay);
 281                 C(vsync_start);
 282                 C(vsync_end);
 283                 C(vtotal);
 284                 C(clock);
 285 #undef C
 286
 287                 drm_mode_set_crtcinfo(adjusted_mode, 0);
 288         }
 289
 290         return true;
 291 }
 292
 293 static void intel_dvo_pre_enable(struct intel_encoder *encoder)
 294 {
 295         struct drm_device *dev = encoder->base.dev;
 296         struct drm_i915_private *dev_priv = dev->dev_private;
 297         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
 298         struct drm_display_mode *adjusted_mode = &crtc->config.base.adjusted_mode;
 299         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 300         int pipe = crtc->pipe;
 301         u32 dvo_val;
 302         u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
 303
 304         switch (dvo_reg) {
 305         case DVOA:
 306         default:
 307                 dvo_srcdim_reg = DVOA_SRCDIM;
 308                 break;
 309         case DVOB:
 310                 dvo_srcdim_reg = DVOB_SRCDIM;
 311                 break;
 312         case DVOC:
 313                 dvo_srcdim_reg = DVOC_SRCDIM;
 314                 break;
 315         }
 316
 317         /* Save the data order, since I don't know what it should be set to. */
 318         dvo_val = I915_READ(dvo_reg) &
 319                   (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
 320         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
 321                    DVO_BLANK_ACTIVE_HIGH;
 322
 323         if (pipe == 1)
 324                 dvo_val |= DVO_PIPE_B_SELECT;
 325         dvo_val |= DVO_PIPE_STALL;
 326         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 327                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
 328         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 329                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 330
 331         /*I915_WRITE(DVOB_SRCDIM,
 332           (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 333           (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
 334         I915_WRITE(dvo_srcdim_reg,
 335                    (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
 336                    (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
 337         /*I915_WRITE(DVOB, dvo_val);*/
 338         I915_WRITE(dvo_reg, dvo_val);
 339 }
 340
 341 /**
 342  * Detect the output connection on our DVO device.
 343  *
 344  * Unimplemented.
 345  */
 346 static enum drm_connector_status
 347 intel_dvo_detect(struct drm_connector *connector, bool force)
 348 {
 349         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 350         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 351                       connector->base.id, connector->name);
 352         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 353 }
 354
 355 static int intel_dvo_get_modes(struct drm_connector *connector)
 356 {
 357         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 358         struct drm_i915_private *dev_priv = connector->dev->dev_private;
 359
 360         /* We should probably have an i2c driver get_modes function for those
 361          * devices which will have a fixed set of modes determined by the chip
 362          * (TV-out, for example), but for now with just TMDS and LVDS,
 363          * that's not the case.
 364          */
 365         intel_ddc_get_modes(connector,
 366                             intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
 367         if (!list_empty(&connector->probed_modes))
 368                 return 1;
 369
 370         if (intel_dvo->panel_fixed_mode != NULL) {
 371                 struct drm_display_mode *mode;
 372                 mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
 373                 if (mode) {
 374                         drm_mode_probed_add(connector, mode);
 375                         return 1;
 376                 }
 377         }
 378
 379         return 0;
 380 }
 381
 382 static void intel_dvo_destroy(struct drm_connector *connector)
 383 {
 384         drm_connector_cleanup(connector);
 385         kfree(connector);
 386 }
 387
 388 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 389         .dpms = intel_dvo_dpms,
 390         .detect = intel_dvo_detect,
 391         .destroy = intel_dvo_destroy,
 392         .fill_modes = drm_helper_probe_single_connector_modes,
 393 };
 394
 395 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 396         .mode_valid = intel_dvo_mode_valid,
 397         .get_modes = intel_dvo_get_modes,
 398         .best_encoder = intel_best_encoder,
 399 };
 400
 401 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 402 {
 403         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
 404
 405         if (intel_dvo->dev.dev_ops->destroy)
 406                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
 407
 408         kfree(intel_dvo->panel_fixed_mode);
 409
 410         intel_encoder_destroy(encoder);
 411 }
 412
 413 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 414         .destroy = intel_dvo_enc_destroy,
 415 };
 416
 417 /**
 418  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
 419  *
 420  * Other chips with DVO LVDS will need to extend this to deal with the LVDS
 421  * chip being on DVOB/C and having multiple pipes.
 422  */
 423 static struct drm_display_mode *
 424 intel_dvo_get_current_mode(struct drm_connector *connector)
 425 {
 426         struct drm_device *dev = connector->dev;
 427         struct drm_i915_private *dev_priv = dev->dev_private;
 428         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 429         uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
 430         struct drm_display_mode *mode = NULL;
 431
 432         /* If the DVO port is active, that'll be the LVDS, so we can pull out
 433          * its timings to get how the BIOS set up the panel.
 434          */
 435         if (dvo_val & DVO_ENABLE) {
 436                 struct drm_crtc *crtc;
 437                 int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
 438
 439                 crtc = intel_get_crtc_for_pipe(dev, pipe);
 440                 if (crtc) {
 441                         mode = intel_crtc_mode_get(dev, crtc);
 442                         if (mode) {
 443                                 mode->type |= DRM_MODE_TYPE_PREFERRED;
 444                                 if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
 445                                         mode->flags |= DRM_MODE_FLAG_PHSYNC;
 446                                 if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
 447                                         mode->flags |= DRM_MODE_FLAG_PVSYNC;
 448                         }
 449                 }
 450         }
 451
 452         return mode;
 453 }
 454
 455 void intel_dvo_init(struct drm_device *dev)
 456 {
 457         struct drm_i915_private *dev_priv = dev->dev_private;
 458         struct intel_encoder *intel_encoder;
 459         struct intel_dvo *intel_dvo;
 460         struct intel_connector *intel_connector;
 461         int i;
 462         int encoder_type = DRM_MODE_ENCODER_NONE;
 463
 464         intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
 465         if (!intel_dvo)
 466                 return;
 467
 468         intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
 469         if (!intel_connector) {
 470                 kfree(intel_dvo);
 471                 return;
 472         }
 473
 474         intel_encoder = &intel_dvo->base;
 475         drm_encoder_init(dev, &intel_encoder->base,
 476                          &intel_dvo_enc_funcs, encoder_type);
 477
 478         intel_encoder->disable = intel_disable_dvo;
 479         intel_encoder->enable = intel_enable_dvo;
 480         intel_encoder->get_hw_state = intel_dvo_get_hw_state;
 481         intel_encoder->get_config = intel_dvo_get_config;
 482         intel_encoder->compute_config = intel_dvo_compute_config;
 483         intel_encoder->pre_enable = intel_dvo_pre_enable;
 484         intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
 485         intel_connector->unregister = intel_connector_unregister;
 486
 487         /* Now, try to find a controller */
 488         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 489                 struct drm_connector *connector = &intel_connector->base;
 490                 const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
 491                 struct i2c_adapter *i2c;
 492                 int gpio;
 493                 bool dvoinit;
 494
 495                 /* Allow the I2C driver info to specify the GPIO to be used in
 496                  * special cases, but otherwise default to what's defined
 497                  * in the spec.
 498                  */
 499                 if (intel_gmbus_is_port_valid(dvo->gpio))
 500                         gpio = dvo->gpio;
 501                 else if (dvo->type == INTEL_DVO_CHIP_LVDS)
 502                         gpio = GMBUS_PORT_SSC;
 503                 else
 504                         gpio = GMBUS_PORT_DPB;
 505
 506                 /* Set up the I2C bus necessary for the chip we're probing.
 507                  * It appears that everything is on GPIOE except for panels
 508                  * on i830 laptops, which are on GPIOB (DVOA).
 509                  */
 510                 i2c = intel_gmbus_get_adapter(dev_priv, gpio);
 511
 512                 intel_dvo->dev = *dvo;
 513
 514                 /* GMBUS NAK handling seems to be unstable, hence let the
 515                  * transmitter detection run in bit banging mode for now.
 516                  */
 517                 intel_gmbus_force_bit(i2c, true);
 518
 519                 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
 520
 521                 intel_gmbus_force_bit(i2c, false);
 522
 523                 if (!dvoinit)
 524                         continue;
 525
 526                 intel_encoder->type = INTEL_OUTPUT_DVO;
 527                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 528                 switch (dvo->type) {
 529                 case INTEL_DVO_CHIP_TMDS:
 530                         intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
 531                                 (1 << INTEL_OUTPUT_DVO);
 532                         drm_connector_init(dev, connector,
 533                                            &intel_dvo_connector_funcs,
 534                                            DRM_MODE_CONNECTOR_DVII);
 535                         encoder_type = DRM_MODE_ENCODER_TMDS;
 536                         break;
 537                 case INTEL_DVO_CHIP_LVDS:
 538                         intel_encoder->cloneable = 0;
 539                         drm_connector_init(dev, connector,
 540                                            &intel_dvo_connector_funcs,
 541                                            DRM_MODE_CONNECTOR_LVDS);
 542                         encoder_type = DRM_MODE_ENCODER_LVDS;
 543                         break;
 544                 }
 545
 546                 drm_connector_helper_add(connector,
 547                                          &intel_dvo_connector_helper_funcs);
 548                 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 549                 connector->interlace_allowed = false;
 550                 connector->doublescan_allowed = false;
 551
 552                 intel_connector_attach_encoder(intel_connector, intel_encoder);
 553                 if (dvo->type == INTEL_DVO_CHIP_LVDS) {
 554                         /* For our LVDS chipsets, we should hopefully be able
 555                          * to dig the fixed panel mode out of the BIOS data.
 556                          * However, it's in a different format from the BIOS
 557                          * data on chipsets with integrated LVDS (stored in AIM
 558                          * headers, likely), so for now, just get the current
 559                          * mode being output through DVO.
 560                          */
 561                         intel_dvo->panel_fixed_mode =
 562                                 intel_dvo_get_current_mode(connector);
 563                         intel_dvo->panel_wants_dither = true;
 564                 }
 565
 566                 drm_connector_register(connector);
 567                 return;
 568         }
 569
 570         drm_encoder_cleanup(&intel_encoder->base);
 571         kfree(intel_dvo);
 572         kfree(intel_connector);
 573 }