drm/i915: Allow DMA pagetables to use highmem

[deliverable/linux.git] / drivers / gpu / drm / i915 / intel_guc_loader.c

/*
 * Copyright © 2014 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 * Authors:
 *    Vinit Azad <vinit.azad@intel.com>
 *    Ben Widawsky <ben@bwidawsk.net>
 *    Dave Gordon <david.s.gordon@intel.com>
 *    Alex Dai <yu.dai@intel.com>
 */
#include <linux/firmware.h>
#include "i915_drv.h"
#include "intel_guc.h"

/**
 * DOC: GuC-specific firmware loader
 *
 * intel_guc:
 * Top level structure of guc. It handles firmware loading and manages client
 * pool and doorbells. intel_guc owns a i915_guc_client to replace the legacy
 * ExecList submission.
 *
 * Firmware versioning:
 * The firmware build process will generate a version header file with major and
 * minor version defined. The versions are built into CSS header of firmware.
 * i915 kernel driver set the minimal firmware version required per platform.
 * The firmware installation package will install (symbolic link) proper version
 * of firmware.
 *
 * GuC address space:
 * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP),
 * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is
 * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
 * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM.
 *
 * Firmware log:
 * Firmware log is enabled by setting i915.guc_log_level to non-negative level.
 * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from
 * i915_guc_load_status will print out firmware loading status and scratch
 * registers value.
 *
 */

#define SKL_FW_MAJOR 6
#define SKL_FW_MINOR 1

#define BXT_FW_MAJOR 8
#define BXT_FW_MINOR 7

#define KBL_FW_MAJOR 9
#define KBL_FW_MINOR 14

#define GUC_FW_PATH(platform, major, minor) \
       "i915/" __stringify(platform) "_guc_ver" __stringify(major) "_" __stringify(minor) ".bin"

#define I915_SKL_GUC_UCODE GUC_FW_PATH(skl, SKL_FW_MAJOR, SKL_FW_MINOR)
MODULE_FIRMWARE(I915_SKL_GUC_UCODE);

#define I915_BXT_GUC_UCODE GUC_FW_PATH(bxt, BXT_FW_MAJOR, BXT_FW_MINOR)
MODULE_FIRMWARE(I915_BXT_GUC_UCODE);

#define I915_KBL_GUC_UCODE GUC_FW_PATH(kbl, KBL_FW_MAJOR, KBL_FW_MINOR)
MODULE_FIRMWARE(I915_KBL_GUC_UCODE);

/* User-friendly representation of an enum */
const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status)
{
        switch (status) {
        case GUC_FIRMWARE_FAIL:
                return "FAIL";
        case GUC_FIRMWARE_NONE:
                return "NONE";
        case GUC_FIRMWARE_PENDING:
                return "PENDING";
        case GUC_FIRMWARE_SUCCESS:
                return "SUCCESS";
        default:
                return "UNKNOWN!";
        }
};

static void direct_interrupts_to_host(struct drm_i915_private *dev_priv)
{
        struct intel_engine_cs *engine;
        int irqs;

        /* tell all command streamers NOT to forward interrupts or vblank to GuC */
        irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_NEVER);
        irqs |= _MASKED_BIT_DISABLE(GFX_INTERRUPT_STEERING);
        for_each_engine(engine, dev_priv)
                I915_WRITE(RING_MODE_GEN7(engine), irqs);

        /* route all GT interrupts to the host */
        I915_WRITE(GUC_BCS_RCS_IER, 0);
        I915_WRITE(GUC_VCS2_VCS1_IER, 0);
        I915_WRITE(GUC_WD_VECS_IER, 0);
}

static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv)
{
        struct intel_engine_cs *engine;
        int irqs;
        u32 tmp;

        /* tell all command streamers to forward interrupts (but not vblank) to GuC */
        irqs = _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING);
        for_each_engine(engine, dev_priv)
                I915_WRITE(RING_MODE_GEN7(engine), irqs);

        /* route USER_INTERRUPT to Host, all others are sent to GuC. */
        irqs = GT_RENDER_USER_INTERRUPT << GEN8_RCS_IRQ_SHIFT |
               GT_RENDER_USER_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
        /* These three registers have the same bit definitions */
        I915_WRITE(GUC_BCS_RCS_IER, ~irqs);
        I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs);
        I915_WRITE(GUC_WD_VECS_IER, ~irqs);

        /*
         * If GuC has routed PM interrupts to itself, don't keep it.
         * and keep other interrupts those are unmasked by GuC.
        */
        tmp = I915_READ(GEN6_PMINTRMSK);
        if (tmp & GEN8_PMINTR_REDIRECT_TO_NON_DISP) {
                dev_priv->rps.pm_intr_keep |= ~(tmp & ~GEN8_PMINTR_REDIRECT_TO_NON_DISP);
                dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP;
        }
}

static u32 get_gttype(struct drm_i915_private *dev_priv)
{
        /* XXX: GT type based on PCI device ID? field seems unused by fw */
        return 0;
}

static u32 get_core_family(struct drm_i915_private *dev_priv)
{
        switch (INTEL_INFO(dev_priv)->gen) {
        case 9:
                return GFXCORE_FAMILY_GEN9;

        default:
                DRM_ERROR("GUC: unsupported core family\n");
                return GFXCORE_FAMILY_UNKNOWN;
        }
}

static void set_guc_init_params(struct drm_i915_private *dev_priv)
{
        struct intel_guc *guc = &dev_priv->guc;
        u32 params[GUC_CTL_MAX_DWORDS];
        int i;

        memset(&params, 0, sizeof(params));

        params[GUC_CTL_DEVICE_INFO] |=
                (get_gttype(dev_priv) << GUC_CTL_GTTYPE_SHIFT) |
                (get_core_family(dev_priv) << GUC_CTL_COREFAMILY_SHIFT);

        /*
         * GuC ARAT increment is 10 ns. GuC default scheduler quantum is one
         * second. This ARAR is calculated by:
         * Scheduler-Quantum-in-ns / ARAT-increment-in-ns = 1000000000 / 10
         */
        params[GUC_CTL_ARAT_HIGH] = 0;
        params[GUC_CTL_ARAT_LOW] = 100000000;

        params[GUC_CTL_WA] |= GUC_CTL_WA_UK_BY_DRIVER;

        params[GUC_CTL_FEATURE] |= GUC_CTL_DISABLE_SCHEDULER |
                        GUC_CTL_VCS2_ENABLED;

        if (i915.guc_log_level >= 0) {
                params[GUC_CTL_LOG_PARAMS] = guc->log_flags;
                params[GUC_CTL_DEBUG] =
                        i915.guc_log_level << GUC_LOG_VERBOSITY_SHIFT;
        }

        if (guc->ads_vma) {
                u32 ads = i915_ggtt_offset(guc->ads_vma) >> PAGE_SHIFT;
                params[GUC_CTL_DEBUG] |= ads << GUC_ADS_ADDR_SHIFT;
                params[GUC_CTL_DEBUG] |= GUC_ADS_ENABLED;
        }

        /* If GuC submission is enabled, set up additional parameters here */
        if (i915.enable_guc_submission) {
                u32 pgs = i915_ggtt_offset(dev_priv->guc.ctx_pool_vma);
                u32 ctx_in_16 = GUC_MAX_GPU_CONTEXTS / 16;

                pgs >>= PAGE_SHIFT;
                params[GUC_CTL_CTXINFO] = (pgs << GUC_CTL_BASE_ADDR_SHIFT) |
                        (ctx_in_16 << GUC_CTL_CTXNUM_IN16_SHIFT);

                params[GUC_CTL_FEATURE] |= GUC_CTL_KERNEL_SUBMISSIONS;

                /* Unmask this bit to enable the GuC's internal scheduler */
                params[GUC_CTL_FEATURE] &= ~GUC_CTL_DISABLE_SCHEDULER;
        }

        I915_WRITE(SOFT_SCRATCH(0), 0);

        for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
                I915_WRITE(SOFT_SCRATCH(1 + i), params[i]);
}

/*
 * Read the GuC status register (GUC_STATUS) and store it in the
 * specified location; then return a boolean indicating whether
 * the value matches either of two values representing completion
 * of the GuC boot process.
 *
 * This is used for polling the GuC status in a wait_for()
 * loop below.
 */
static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
                                      u32 *status)
{
        u32 val = I915_READ(GUC_STATUS);
        u32 uk_val = val & GS_UKERNEL_MASK;
        *status = val;
        return (uk_val == GS_UKERNEL_READY ||
                ((val & GS_MIA_CORE_STATE) && uk_val == GS_UKERNEL_LAPIC_DONE));
}

/*
 * Transfer the firmware image to RAM for execution by the microcontroller.
 *
 * Architecturally, the DMA engine is bidirectional, and can potentially even
 * transfer between GTT locations. This functionality is left out of the API
 * for now as there is no need for it.
 *
 * Note that GuC needs the CSS header plus uKernel code to be copied by the
 * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
 */
static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
                              struct i915_vma *vma)
{
        struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
        unsigned long offset;
        struct sg_table *sg = vma->pages;
        u32 status, rsa[UOS_RSA_SCRATCH_MAX_COUNT];
        int i, ret = 0;

        /* where RSA signature starts */
        offset = guc_fw->rsa_offset;

        /* Copy RSA signature from the fw image to HW for verification */
        sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa), offset);
        for (i = 0; i < UOS_RSA_SCRATCH_MAX_COUNT; i++)
                I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);

        /* The header plus uCode will be copied to WOPCM via DMA, excluding any
         * other components */
        I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);

        /* Set the source address for the new blob */
        offset = i915_ggtt_offset(vma) + guc_fw->header_offset;
        I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
        I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);

        /*
         * Set the DMA destination. Current uCode expects the code to be
         * loaded at 8k; locations below this are used for the stack.
         */
        I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
        I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);

        /* Finally start the DMA */
        I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));

        /*
         * Wait for the DMA to complete & the GuC to start up.
         * NB: Docs recommend not using the interrupt for completion.
         * Measurements indicate this should take no more than 20ms, so a
         * timeout here indicates that the GuC has failed and is unusable.
         * (Higher levels of the driver will attempt to fall back to
         * execlist mode if this happens.)
         */
        ret = wait_for(guc_ucode_response(dev_priv, &status), 100);

        DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
                        I915_READ(DMA_CTRL), status);

        if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
                DRM_ERROR("GuC firmware signature verification failed\n");
                ret = -ENOEXEC;
        }

        DRM_DEBUG_DRIVER("returning %d\n", ret);

        return ret;
}

static u32 guc_wopcm_size(struct drm_i915_private *dev_priv)
{
        u32 wopcm_size = GUC_WOPCM_TOP;

        /* On BXT, the top of WOPCM is reserved for RC6 context */
        if (IS_BROXTON(dev_priv))
                wopcm_size -= BXT_GUC_WOPCM_RC6_RESERVED;

        return wopcm_size;
}

/*
 * Load the GuC firmware blob into the MinuteIA.
 */
static int guc_ucode_xfer(struct drm_i915_private *dev_priv)
{
        struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
        struct drm_device *dev = &dev_priv->drm;
        struct i915_vma *vma;
        int ret;

        ret = i915_gem_object_set_to_gtt_domain(guc_fw->guc_fw_obj, false);
        if (ret) {
                DRM_DEBUG_DRIVER("set-domain failed %d\n", ret);
                return ret;
        }

        vma = i915_gem_object_ggtt_pin(guc_fw->guc_fw_obj, NULL, 0, 0, 0);
        if (IS_ERR(vma)) {
                DRM_DEBUG_DRIVER("pin failed %d\n", (int)PTR_ERR(vma));
                return PTR_ERR(vma);
        }

        /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
        I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);

        intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);

        /* init WOPCM */
        I915_WRITE(GUC_WOPCM_SIZE, guc_wopcm_size(dev_priv));
        I915_WRITE(DMA_GUC_WOPCM_OFFSET, GUC_WOPCM_OFFSET_VALUE);

        /* Enable MIA caching. GuC clock gating is disabled. */
        I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);

        /* WaDisableMinuteIaClockGating:skl,bxt */
        if (IS_SKL_REVID(dev, 0, SKL_REVID_B0) ||
            IS_BXT_REVID(dev, 0, BXT_REVID_A1)) {
                I915_WRITE(GUC_SHIM_CONTROL, (I915_READ(GUC_SHIM_CONTROL) &
                                              ~GUC_ENABLE_MIA_CLOCK_GATING));
        }

        /* WaC6DisallowByGfxPause*/
        if (IS_SKL_REVID(dev, 0, SKL_REVID_C0) ||
            IS_BXT_REVID(dev, 0, BXT_REVID_B0))
                I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);

        if (IS_BROXTON(dev))
                I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
        else
                I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);

        if (IS_GEN9(dev)) {
                /* DOP Clock Gating Enable for GuC clocks */
                I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
                                            I915_READ(GEN7_MISCCPCTL)));

                /* allows for 5us before GT can go to RC6 */
                I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
        }

        set_guc_init_params(dev_priv);

        ret = guc_ucode_xfer_dma(dev_priv, vma);

        intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);

        /*
         * We keep the object pages for reuse during resume. But we can unpin it
         * now that DMA has completed, so it doesn't continue to take up space.
         */
        i915_vma_unpin(vma);

        return ret;
}

static int i915_reset_guc(struct drm_i915_private *dev_priv)
{
        int ret;
        u32 guc_status;

        ret = intel_guc_reset(dev_priv);
        if (ret) {
                DRM_ERROR("GuC reset failed, ret = %d\n", ret);
                return ret;
        }

        guc_status = I915_READ(GUC_STATUS);
        WARN(!(guc_status & GS_MIA_IN_RESET),
             "GuC status: 0x%x, MIA core expected to be in reset\n", guc_status);

        return ret;
}

/**
 * intel_guc_setup() - finish preparing the GuC for activity
 * @dev:        drm device
 *
 * Called from gem_init_hw() during driver loading and also after a GPU reset.
 *
 * The main action required here it to load the GuC uCode into the device.
 * The firmware image should have already been fetched into memory by the
 * earlier call to intel_guc_init(), so here we need only check that worked,
 * and then transfer the image to the h/w.
 *
 * Return:      non-zero code on error
 */
int intel_guc_setup(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
        const char *fw_path = guc_fw->guc_fw_path;
        int retries, ret, err;

        DRM_DEBUG_DRIVER("GuC fw status: path %s, fetch %s, load %s\n",
                fw_path,
                intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
                intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));

        /* Loading forbidden, or no firmware to load? */
        if (!i915.enable_guc_loading) {
                err = 0;
                goto fail;
        } else if (fw_path == NULL) {
                /* Device is known to have no uCode (e.g. no GuC) */
                err = -ENXIO;
                goto fail;
        } else if (*fw_path == '\0') {
                /* Device has a GuC but we don't know what f/w to load? */
                DRM_INFO("No GuC firmware known for this platform\n");
                err = -ENODEV;
                goto fail;
        }

        /* Fetch failed, or already fetched but failed to load? */
        if (guc_fw->guc_fw_fetch_status != GUC_FIRMWARE_SUCCESS) {
                err = -EIO;
                goto fail;
        } else if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL) {
                err = -ENOEXEC;
                goto fail;
        }

        direct_interrupts_to_host(dev_priv);

        guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING;

        DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
                intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
                intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));

        err = i915_guc_submission_init(dev_priv);
        if (err)
                goto fail;

        /*
         * WaEnableuKernelHeaderValidFix:skl,bxt
         * For BXT, this is only upto B0 but below WA is required for later
         * steppings also so this is extended as well.
         */
        /* WaEnableGuCBootHashCheckNotSet:skl,bxt */
        for (retries = 3; ; ) {
                /*
                 * Always reset the GuC just before (re)loading, so
                 * that the state and timing are fairly predictable
                 */
                err = i915_reset_guc(dev_priv);
                if (err) {
                        DRM_ERROR("GuC reset failed: %d\n", err);
                        goto fail;
                }

                err = guc_ucode_xfer(dev_priv);
                if (!err)
                        break;

                if (--retries == 0)
                        goto fail;

                DRM_INFO("GuC fw load failed: %d; will reset and "
                         "retry %d more time(s)\n", err, retries);
        }

        guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS;

        DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n",
                intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status),
                intel_guc_fw_status_repr(guc_fw->guc_fw_load_status));

        if (i915.enable_guc_submission) {
                err = i915_guc_submission_enable(dev_priv);
                if (err)
                        goto fail;
                direct_interrupts_to_guc(dev_priv);
        }

        return 0;

fail:
        if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING)
                guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL;

        direct_interrupts_to_host(dev_priv);
        i915_guc_submission_disable(dev_priv);
        i915_guc_submission_fini(dev_priv);

        /*
         * We've failed to load the firmware :(
         *
         * Decide whether to disable GuC submission and fall back to
         * execlist mode, and whether to hide the error by returning
         * zero or to return -EIO, which the caller will treat as a
         * nonfatal error (i.e. it doesn't prevent driver load, but
         * marks the GPU as wedged until reset).
         */
        if (i915.enable_guc_loading > 1) {
                ret = -EIO;
        } else if (i915.enable_guc_submission > 1) {
                ret = -EIO;
        } else {
                ret = 0;
        }

        if (err == 0 && !HAS_GUC_UCODE(dev))
                ;       /* Don't mention the GuC! */
        else if (err == 0)
                DRM_INFO("GuC firmware load skipped\n");
        else if (ret != -EIO)
                DRM_INFO("GuC firmware load failed: %d\n", err);
        else
                DRM_ERROR("GuC firmware load failed: %d\n", err);

        if (i915.enable_guc_submission) {
                if (fw_path == NULL)
                        DRM_INFO("GuC submission without firmware not supported\n");
                if (ret == 0)
                        DRM_INFO("Falling back from GuC submission to execlist mode\n");
                else
                        DRM_ERROR("GuC init failed: %d\n", ret);
        }
        i915.enable_guc_submission = 0;

        return ret;
}

static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw)
{
        struct pci_dev *pdev = dev->pdev;
        struct drm_i915_gem_object *obj;
        const struct firmware *fw;
        struct guc_css_header *css;
        size_t size;
        int err;

        DRM_DEBUG_DRIVER("before requesting firmware: GuC fw fetch status %s\n",
                intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status));

        err = request_firmware(&fw, guc_fw->guc_fw_path, &pdev->dev);
        if (err)
                goto fail;
        if (!fw)
                goto fail;

        DRM_DEBUG_DRIVER("fetch GuC fw from %s succeeded, fw %p\n",
                guc_fw->guc_fw_path, fw);

        /* Check the size of the blob before examining buffer contents */
        if (fw->size < sizeof(struct guc_css_header)) {
                DRM_ERROR("Firmware header is missing\n");
                goto fail;
        }

        css = (struct guc_css_header *)fw->data;

        /* Firmware bits always start from header */
        guc_fw->header_offset = 0;
        guc_fw->header_size = (css->header_size_dw - css->modulus_size_dw -
                css->key_size_dw - css->exponent_size_dw) * sizeof(u32);

        if (guc_fw->header_size != sizeof(struct guc_css_header)) {
                DRM_ERROR("CSS header definition mismatch\n");
                goto fail;
        }

        /* then, uCode */
        guc_fw->ucode_offset = guc_fw->header_offset + guc_fw->header_size;
        guc_fw->ucode_size = (css->size_dw - css->header_size_dw) * sizeof(u32);

        /* now RSA */
        if (css->key_size_dw != UOS_RSA_SCRATCH_MAX_COUNT) {
                DRM_ERROR("RSA key size is bad\n");
                goto fail;
        }
        guc_fw->rsa_offset = guc_fw->ucode_offset + guc_fw->ucode_size;
        guc_fw->rsa_size = css->key_size_dw * sizeof(u32);

        /* At least, it should have header, uCode and RSA. Size of all three. */
        size = guc_fw->header_size + guc_fw->ucode_size + guc_fw->rsa_size;
        if (fw->size < size) {
                DRM_ERROR("Missing firmware components\n");
                goto fail;
        }

        /* Header and uCode will be loaded to WOPCM. Size of the two. */
        size = guc_fw->header_size + guc_fw->ucode_size;
        if (size > guc_wopcm_size(to_i915(dev))) {
                DRM_ERROR("Firmware is too large to fit in WOPCM\n");
                goto fail;
        }

        /*
         * The GuC firmware image has the version number embedded at a well-known
         * offset within the firmware blob; note that major / minor version are
         * TWO bytes each (i.e. u16), although all pointers and offsets are defined
         * in terms of bytes (u8).
         */
        guc_fw->guc_fw_major_found = css->guc_sw_version >> 16;
        guc_fw->guc_fw_minor_found = css->guc_sw_version & 0xFFFF;

        if (guc_fw->guc_fw_major_found != guc_fw->guc_fw_major_wanted ||
            guc_fw->guc_fw_minor_found < guc_fw->guc_fw_minor_wanted) {
                DRM_ERROR("GuC firmware version %d.%d, required %d.%d\n",
                        guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
                        guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);
                err = -ENOEXEC;
                goto fail;
        }

        DRM_DEBUG_DRIVER("firmware version %d.%d OK (minimum %d.%d)\n",
                        guc_fw->guc_fw_major_found, guc_fw->guc_fw_minor_found,
                        guc_fw->guc_fw_major_wanted, guc_fw->guc_fw_minor_wanted);

        mutex_lock(&dev->struct_mutex);
        obj = i915_gem_object_create_from_data(dev, fw->data, fw->size);
        mutex_unlock(&dev->struct_mutex);
        if (IS_ERR_OR_NULL(obj)) {
                err = obj ? PTR_ERR(obj) : -ENOMEM;
                goto fail;
        }

        guc_fw->guc_fw_obj = obj;
        guc_fw->guc_fw_size = fw->size;

        DRM_DEBUG_DRIVER("GuC fw fetch status SUCCESS, obj %p\n",
                        guc_fw->guc_fw_obj);

        release_firmware(fw);
        guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_SUCCESS;
        return;

fail:
        DRM_DEBUG_DRIVER("GuC fw fetch status FAIL; err %d, fw %p, obj %p\n",
                err, fw, guc_fw->guc_fw_obj);
        DRM_ERROR("Failed to fetch GuC firmware from %s (error %d)\n",
                  guc_fw->guc_fw_path, err);

        mutex_lock(&dev->struct_mutex);
        obj = guc_fw->guc_fw_obj;
        if (obj)
                i915_gem_object_put(obj);
        guc_fw->guc_fw_obj = NULL;
        mutex_unlock(&dev->struct_mutex);

        release_firmware(fw);           /* OK even if fw is NULL */
        guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL;
}

/**
 * intel_guc_init() - define parameters and fetch firmware
 * @dev:        drm device
 *
 * Called early during driver load, but after GEM is initialised.
 *
 * The firmware will be transferred to the GuC's memory later,
 * when intel_guc_setup() is called.
 */
void intel_guc_init(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;
        const char *fw_path;

        /* A negative value means "use platform default" */
        if (i915.enable_guc_loading < 0)
                i915.enable_guc_loading = HAS_GUC_UCODE(dev);
        if (i915.enable_guc_submission < 0)
                i915.enable_guc_submission = HAS_GUC_SCHED(dev);

        if (!HAS_GUC_UCODE(dev)) {
                fw_path = NULL;
        } else if (IS_SKYLAKE(dev)) {
                fw_path = I915_SKL_GUC_UCODE;
                guc_fw->guc_fw_major_wanted = SKL_FW_MAJOR;
                guc_fw->guc_fw_minor_wanted = SKL_FW_MINOR;
        } else if (IS_BROXTON(dev)) {
                fw_path = I915_BXT_GUC_UCODE;
                guc_fw->guc_fw_major_wanted = BXT_FW_MAJOR;
                guc_fw->guc_fw_minor_wanted = BXT_FW_MINOR;
        } else if (IS_KABYLAKE(dev)) {
                fw_path = I915_KBL_GUC_UCODE;
                guc_fw->guc_fw_major_wanted = KBL_FW_MAJOR;
                guc_fw->guc_fw_minor_wanted = KBL_FW_MINOR;
        } else {
                fw_path = "";   /* unknown device */
        }

        guc_fw->guc_dev = dev;
        guc_fw->guc_fw_path = fw_path;
        guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
        guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE;

        /* Early (and silent) return if GuC loading is disabled */
        if (!i915.enable_guc_loading)
                return;
        if (fw_path == NULL)
                return;
        if (*fw_path == '\0')
                return;

        guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING;
        DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path);
        guc_fw_fetch(dev, guc_fw);
        /* status must now be FAIL or SUCCESS */
}

/**
 * intel_guc_fini() - clean up all allocated resources
 * @dev:        drm device
 */
void intel_guc_fini(struct drm_device *dev)
{
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw;

        mutex_lock(&dev->struct_mutex);
        direct_interrupts_to_host(dev_priv);
        i915_guc_submission_disable(dev_priv);
        i915_guc_submission_fini(dev_priv);

        if (guc_fw->guc_fw_obj)
                i915_gem_object_put(guc_fw->guc_fw_obj);
        guc_fw->guc_fw_obj = NULL;
        mutex_unlock(&dev->struct_mutex);

        guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE;
}