drivers/gpu/drm/i915/intel_sprite.c

   1 /*
   2  * Copyright © 2011 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  20  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  21  * SOFTWARE.
  22  *
  23  * Authors:
  24  *   Jesse Barnes <jbarnes@virtuousgeek.org>
  25  *
  26  * New plane/sprite handling.
  27  *
  28  * The older chips had a separate interface for programming plane related
  29  * registers; newer ones are much simpler and we can use the new DRM plane
  30  * support.
  31  */
  32 #include <drm/drmP.h>
  33 #include <drm/drm_crtc.h>
  34 #include <drm/drm_fourcc.h>
  35 #include <drm/drm_rect.h>
  36 #include <drm/drm_atomic.h>
  37 #include <drm/drm_plane_helper.h>
  38 #include "intel_drv.h"
  39 #include <drm/i915_drm.h>
  40 #include "i915_drv.h"
  41
  42 static bool
  43 format_is_yuv(uint32_t format)
  44 {
  45         switch (format) {
  46         case DRM_FORMAT_YUYV:
  47         case DRM_FORMAT_UYVY:
  48         case DRM_FORMAT_VYUY:
  49         case DRM_FORMAT_YVYU:
  50                 return true;
  51         default:
  52                 return false;
  53         }
  54 }
  55
  56 static int usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
  57                               int usecs)
  58 {
  59         /* paranoia */
  60         if (!adjusted_mode->crtc_htotal)
  61                 return 1;
  62
  63         return DIV_ROUND_UP(usecs * adjusted_mode->crtc_clock,
  64                             1000 * adjusted_mode->crtc_htotal);
  65 }
  66
  67 /**
  68  * intel_pipe_update_start() - start update of a set of display registers
  69  * @crtc: the crtc of which the registers are going to be updated
  70  * @start_vbl_count: vblank counter return pointer used for error checking
  71  *
  72  * Mark the start of an update to pipe registers that should be updated
  73  * atomically regarding vblank. If the next vblank will happens within
  74  * the next 100 us, this function waits until the vblank passes.
  75  *
  76  * After a successful call to this function, interrupts will be disabled
  77  * until a subsequent call to intel_pipe_update_end(). That is done to
  78  * avoid random delays. The value written to @start_vbl_count should be
  79  * supplied to intel_pipe_update_end() for error checking.
  80  */
  81 void intel_pipe_update_start(struct intel_crtc *crtc)
  82 {
  83         struct drm_device *dev = crtc->base.dev;
  84         const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
  85         enum pipe pipe = crtc->pipe;
  86         long timeout = msecs_to_jiffies_timeout(1);
  87         int scanline, min, max, vblank_start;
  88         wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
  89         DEFINE_WAIT(wait);
  90
  91         vblank_start = adjusted_mode->crtc_vblank_start;
  92         if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
  93                 vblank_start = DIV_ROUND_UP(vblank_start, 2);
  94
  95         /* FIXME needs to be calibrated sensibly */
  96         min = vblank_start - usecs_to_scanlines(adjusted_mode, 100);
  97         max = vblank_start - 1;
  98
  99         local_irq_disable();
 100
 101         if (min <= 0 || max <= 0)
 102                 return;
 103
 104         if (WARN_ON(drm_crtc_vblank_get(&crtc->base)))
 105                 return;
 106
 107         crtc->debug.min_vbl = min;
 108         crtc->debug.max_vbl = max;
 109         trace_i915_pipe_update_start(crtc);
 110
 111         for (;;) {
 112                 /*
 113                  * prepare_to_wait() has a memory barrier, which guarantees
 114                  * other CPUs can see the task state update by the time we
 115                  * read the scanline.
 116                  */
 117                 prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
 118
 119                 scanline = intel_get_crtc_scanline(crtc);
 120                 if (scanline < min || scanline > max)
 121                         break;
 122
 123                 if (timeout <= 0) {
 124                         DRM_ERROR("Potential atomic update failure on pipe %c\n",
 125                                   pipe_name(crtc->pipe));
 126                         break;
 127                 }
 128
 129                 local_irq_enable();
 130
 131                 timeout = schedule_timeout(timeout);
 132
 133                 local_irq_disable();
 134         }
 135
 136         finish_wait(wq, &wait);
 137
 138         drm_crtc_vblank_put(&crtc->base);
 139
 140         crtc->debug.scanline_start = scanline;
 141         crtc->debug.start_vbl_time = ktime_get();
 142         crtc->debug.start_vbl_count =
 143                 dev->driver->get_vblank_counter(dev, pipe);
 144
 145         trace_i915_pipe_update_vblank_evaded(crtc);
 146 }
 147
 148 /**
 149  * intel_pipe_update_end() - end update of a set of display registers
 150  * @crtc: the crtc of which the registers were updated
 151  * @start_vbl_count: start vblank counter (used for error checking)
 152  *
 153  * Mark the end of an update started with intel_pipe_update_start(). This
 154  * re-enables interrupts and verifies the update was actually completed
 155  * before a vblank using the value of @start_vbl_count.
 156  */
 157 void intel_pipe_update_end(struct intel_crtc *crtc)
 158 {
 159         struct drm_device *dev = crtc->base.dev;
 160         enum pipe pipe = crtc->pipe;
 161         int scanline_end = intel_get_crtc_scanline(crtc);
 162         u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
 163         ktime_t end_vbl_time = ktime_get();
 164
 165         trace_i915_pipe_update_end(crtc, end_vbl_count, scanline_end);
 166
 167         local_irq_enable();
 168
 169         if (crtc->debug.start_vbl_count &&
 170             crtc->debug.start_vbl_count != end_vbl_count) {
 171                 DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u) time %lld us, min %d, max %d, scanline start %d, end %d\n",
 172                           pipe_name(pipe), crtc->debug.start_vbl_count,
 173                           end_vbl_count,
 174                           ktime_us_delta(end_vbl_time, crtc->debug.start_vbl_time),
 175                           crtc->debug.min_vbl, crtc->debug.max_vbl,
 176                           crtc->debug.scanline_start, scanline_end);
 177         }
 178 }
 179
 180 static void
 181 skl_update_plane(struct drm_plane *drm_plane,
 182                  const struct intel_crtc_state *crtc_state,
 183                  const struct intel_plane_state *plane_state)
 184 {
 185         struct drm_device *dev = drm_plane->dev;
 186         struct drm_i915_private *dev_priv = dev->dev_private;
 187         struct intel_plane *intel_plane = to_intel_plane(drm_plane);
 188         struct drm_framebuffer *fb = plane_state->base.fb;
 189         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 190         const int pipe = intel_plane->pipe;
 191         const int plane = intel_plane->plane + 1;
 192         u32 plane_ctl, stride_div, stride;
 193         const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
 194         u32 surf_addr;
 195         u32 tile_height, plane_offset, plane_size;
 196         unsigned int rotation = plane_state->base.rotation;
 197         int x_offset, y_offset;
 198         int crtc_x = plane_state->dst.x1;
 199         int crtc_y = plane_state->dst.y1;
 200         uint32_t crtc_w = drm_rect_width(&plane_state->dst);
 201         uint32_t crtc_h = drm_rect_height(&plane_state->dst);
 202         uint32_t x = plane_state->src.x1 >> 16;
 203         uint32_t y = plane_state->src.y1 >> 16;
 204         uint32_t src_w = drm_rect_width(&plane_state->src) >> 16;
 205         uint32_t src_h = drm_rect_height(&plane_state->src) >> 16;
 206         const struct intel_scaler *scaler =
 207                 &crtc_state->scaler_state.scalers[plane_state->scaler_id];
 208
 209         plane_ctl = PLANE_CTL_ENABLE |
 210                 PLANE_CTL_PIPE_GAMMA_ENABLE |
 211                 PLANE_CTL_PIPE_CSC_ENABLE;
 212
 213         plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
 214         plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
 215
 216         plane_ctl |= skl_plane_ctl_rotation(rotation);
 217
 218         stride_div = intel_fb_stride_alignment(dev_priv, fb->modifier[0],
 219                                                fb->pixel_format);
 220
 221         /* Sizes are 0 based */
 222         src_w--;
 223         src_h--;
 224         crtc_w--;
 225         crtc_h--;
 226
 227         if (key->flags) {
 228                 I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
 229                 I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
 230                 I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask);
 231         }
 232
 233         if (key->flags & I915_SET_COLORKEY_DESTINATION)
 234                 plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
 235         else if (key->flags & I915_SET_COLORKEY_SOURCE)
 236                 plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
 237
 238         surf_addr = intel_plane_obj_offset(intel_plane, obj, 0);
 239
 240         if (intel_rotation_90_or_270(rotation)) {
 241                 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 242
 243                 /* stride: Surface height in tiles */
 244                 tile_height = intel_tile_height(dev_priv, fb->modifier[0], cpp);
 245                 stride = DIV_ROUND_UP(fb->height, tile_height);
 246                 plane_size = (src_w << 16) | src_h;
 247                 x_offset = stride * tile_height - y - (src_h + 1);
 248                 y_offset = x;
 249         } else {
 250                 stride = fb->pitches[0] / stride_div;
 251                 plane_size = (src_h << 16) | src_w;
 252                 x_offset = x;
 253                 y_offset = y;
 254         }
 255         plane_offset = y_offset << 16 | x_offset;
 256
 257         I915_WRITE(PLANE_OFFSET(pipe, plane), plane_offset);
 258         I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
 259         I915_WRITE(PLANE_SIZE(pipe, plane), plane_size);
 260
 261         /* program plane scaler */
 262         if (plane_state->scaler_id >= 0) {
 263                 uint32_t ps_ctrl = 0;
 264                 int scaler_id = plane_state->scaler_id;
 265
 266                 DRM_DEBUG_KMS("plane = %d PS_PLANE_SEL(plane) = 0x%x\n", plane,
 267                         PS_PLANE_SEL(plane));
 268                 ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(plane) | scaler->mode;
 269                 I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
 270                 I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
 271                 I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
 272                 I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id),
 273                         ((crtc_w + 1) << 16)|(crtc_h + 1));
 274
 275                 I915_WRITE(PLANE_POS(pipe, plane), 0);
 276         } else {
 277                 I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
 278         }
 279
 280         I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
 281         I915_WRITE(PLANE_SURF(pipe, plane), surf_addr);
 282         POSTING_READ(PLANE_SURF(pipe, plane));
 283 }
 284
 285 static void
 286 skl_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
 287 {
 288         struct drm_device *dev = dplane->dev;
 289         struct drm_i915_private *dev_priv = dev->dev_private;
 290         struct intel_plane *intel_plane = to_intel_plane(dplane);
 291         const int pipe = intel_plane->pipe;
 292         const int plane = intel_plane->plane + 1;
 293
 294         I915_WRITE(PLANE_CTL(pipe, plane), 0);
 295
 296         I915_WRITE(PLANE_SURF(pipe, plane), 0);
 297         POSTING_READ(PLANE_SURF(pipe, plane));
 298 }
 299
 300 static void
 301 chv_update_csc(struct intel_plane *intel_plane, uint32_t format)
 302 {
 303         struct drm_i915_private *dev_priv = intel_plane->base.dev->dev_private;
 304         int plane = intel_plane->plane;
 305
 306         /* Seems RGB data bypasses the CSC always */
 307         if (!format_is_yuv(format))
 308                 return;
 309
 310         /*
 311          * BT.601 limited range YCbCr -> full range RGB
 312          *
 313          * |r|   | 6537 4769     0|   |cr  |
 314          * |g| = |-3330 4769 -1605| x |y-64|
 315          * |b|   |    0 4769  8263|   |cb  |
 316          *
 317          * Cb and Cr apparently come in as signed already, so no
 318          * need for any offset. For Y we need to remove the offset.
 319          */
 320         I915_WRITE(SPCSCYGOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(-64));
 321         I915_WRITE(SPCSCCBOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
 322         I915_WRITE(SPCSCCROFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
 323
 324         I915_WRITE(SPCSCC01(plane), SPCSC_C1(4769) | SPCSC_C0(6537));
 325         I915_WRITE(SPCSCC23(plane), SPCSC_C1(-3330) | SPCSC_C0(0));
 326         I915_WRITE(SPCSCC45(plane), SPCSC_C1(-1605) | SPCSC_C0(4769));
 327         I915_WRITE(SPCSCC67(plane), SPCSC_C1(4769) | SPCSC_C0(0));
 328         I915_WRITE(SPCSCC8(plane), SPCSC_C0(8263));
 329
 330         I915_WRITE(SPCSCYGICLAMP(plane), SPCSC_IMAX(940) | SPCSC_IMIN(64));
 331         I915_WRITE(SPCSCCBICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
 332         I915_WRITE(SPCSCCRICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
 333
 334         I915_WRITE(SPCSCYGOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
 335         I915_WRITE(SPCSCCBOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
 336         I915_WRITE(SPCSCCROCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
 337 }
 338
 339 static void
 340 vlv_update_plane(struct drm_plane *dplane,
 341                  const struct intel_crtc_state *crtc_state,
 342                  const struct intel_plane_state *plane_state)
 343 {
 344         struct drm_device *dev = dplane->dev;
 345         struct drm_i915_private *dev_priv = dev->dev_private;
 346         struct intel_plane *intel_plane = to_intel_plane(dplane);
 347         struct drm_framebuffer *fb = plane_state->base.fb;
 348         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 349         int pipe = intel_plane->pipe;
 350         int plane = intel_plane->plane;
 351         u32 sprctl;
 352         u32 sprsurf_offset, linear_offset;
 353         unsigned int rotation = dplane->state->rotation;
 354         int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 355         const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
 356         int crtc_x = plane_state->dst.x1;
 357         int crtc_y = plane_state->dst.y1;
 358         uint32_t crtc_w = drm_rect_width(&plane_state->dst);
 359         uint32_t crtc_h = drm_rect_height(&plane_state->dst);
 360         uint32_t x = plane_state->src.x1 >> 16;
 361         uint32_t y = plane_state->src.y1 >> 16;
 362         uint32_t src_w = drm_rect_width(&plane_state->src) >> 16;
 363         uint32_t src_h = drm_rect_height(&plane_state->src) >> 16;
 364
 365         sprctl = SP_ENABLE;
 366
 367         switch (fb->pixel_format) {
 368         case DRM_FORMAT_YUYV:
 369                 sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
 370                 break;
 371         case DRM_FORMAT_YVYU:
 372                 sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
 373                 break;
 374         case DRM_FORMAT_UYVY:
 375                 sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
 376                 break;
 377         case DRM_FORMAT_VYUY:
 378                 sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
 379                 break;
 380         case DRM_FORMAT_RGB565:
 381                 sprctl |= SP_FORMAT_BGR565;
 382                 break;
 383         case DRM_FORMAT_XRGB8888:
 384                 sprctl |= SP_FORMAT_BGRX8888;
 385                 break;
 386         case DRM_FORMAT_ARGB8888:
 387                 sprctl |= SP_FORMAT_BGRA8888;
 388                 break;
 389         case DRM_FORMAT_XBGR2101010:
 390                 sprctl |= SP_FORMAT_RGBX1010102;
 391                 break;
 392         case DRM_FORMAT_ABGR2101010:
 393                 sprctl |= SP_FORMAT_RGBA1010102;
 394                 break;
 395         case DRM_FORMAT_XBGR8888:
 396                 sprctl |= SP_FORMAT_RGBX8888;
 397                 break;
 398         case DRM_FORMAT_ABGR8888:
 399                 sprctl |= SP_FORMAT_RGBA8888;
 400                 break;
 401         default:
 402                 /*
 403                  * If we get here one of the upper layers failed to filter
 404                  * out the unsupported plane formats
 405                  */
 406                 BUG();
 407                 break;
 408         }
 409
 410         /*
 411          * Enable gamma to match primary/cursor plane behaviour.
 412          * FIXME should be user controllable via propertiesa.
 413          */
 414         sprctl |= SP_GAMMA_ENABLE;
 415
 416         if (obj->tiling_mode != I915_TILING_NONE)
 417                 sprctl |= SP_TILED;
 418
 419         /* Sizes are 0 based */
 420         src_w--;
 421         src_h--;
 422         crtc_w--;
 423         crtc_h--;
 424
 425         linear_offset = y * fb->pitches[0] + x * cpp;
 426         sprsurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
 427                                                    fb->pitches[0], rotation);
 428         linear_offset -= sprsurf_offset;
 429
 430         if (rotation == BIT(DRM_ROTATE_180)) {
 431                 sprctl |= SP_ROTATE_180;
 432
 433                 x += src_w;
 434                 y += src_h;
 435                 linear_offset += src_h * fb->pitches[0] + src_w * cpp;
 436         }
 437
 438         if (key->flags) {
 439                 I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
 440                 I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
 441                 I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
 442         }
 443
 444         if (key->flags & I915_SET_COLORKEY_SOURCE)
 445                 sprctl |= SP_SOURCE_KEY;
 446
 447         if (IS_CHERRYVIEW(dev) && pipe == PIPE_B)
 448                 chv_update_csc(intel_plane, fb->pixel_format);
 449
 450         I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
 451         I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
 452
 453         if (obj->tiling_mode != I915_TILING_NONE)
 454                 I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
 455         else
 456                 I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
 457
 458         I915_WRITE(SPCONSTALPHA(pipe, plane), 0);
 459
 460         I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
 461         I915_WRITE(SPCNTR(pipe, plane), sprctl);
 462         I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
 463                    sprsurf_offset);
 464         POSTING_READ(SPSURF(pipe, plane));
 465 }
 466
 467 static void
 468 vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
 469 {
 470         struct drm_device *dev = dplane->dev;
 471         struct drm_i915_private *dev_priv = dev->dev_private;
 472         struct intel_plane *intel_plane = to_intel_plane(dplane);
 473         int pipe = intel_plane->pipe;
 474         int plane = intel_plane->plane;
 475
 476         I915_WRITE(SPCNTR(pipe, plane), 0);
 477
 478         I915_WRITE(SPSURF(pipe, plane), 0);
 479         POSTING_READ(SPSURF(pipe, plane));
 480 }
 481
 482 static void
 483 ivb_update_plane(struct drm_plane *plane,
 484                  const struct intel_crtc_state *crtc_state,
 485                  const struct intel_plane_state *plane_state)
 486 {
 487         struct drm_device *dev = plane->dev;
 488         struct drm_i915_private *dev_priv = dev->dev_private;
 489         struct intel_plane *intel_plane = to_intel_plane(plane);
 490         struct drm_framebuffer *fb = plane_state->base.fb;
 491         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 492         enum pipe pipe = intel_plane->pipe;
 493         u32 sprctl, sprscale = 0;
 494         u32 sprsurf_offset, linear_offset;
 495         unsigned int rotation = plane_state->base.rotation;
 496         int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 497         const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
 498         int crtc_x = plane_state->dst.x1;
 499         int crtc_y = plane_state->dst.y1;
 500         uint32_t crtc_w = drm_rect_width(&plane_state->dst);
 501         uint32_t crtc_h = drm_rect_height(&plane_state->dst);
 502         uint32_t x = plane_state->src.x1 >> 16;
 503         uint32_t y = plane_state->src.y1 >> 16;
 504         uint32_t src_w = drm_rect_width(&plane_state->src) >> 16;
 505         uint32_t src_h = drm_rect_height(&plane_state->src) >> 16;
 506
 507         sprctl = SPRITE_ENABLE;
 508
 509         switch (fb->pixel_format) {
 510         case DRM_FORMAT_XBGR8888:
 511                 sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
 512                 break;
 513         case DRM_FORMAT_XRGB8888:
 514                 sprctl |= SPRITE_FORMAT_RGBX888;
 515                 break;
 516         case DRM_FORMAT_YUYV:
 517                 sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
 518                 break;
 519         case DRM_FORMAT_YVYU:
 520                 sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
 521                 break;
 522         case DRM_FORMAT_UYVY:
 523                 sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
 524                 break;
 525         case DRM_FORMAT_VYUY:
 526                 sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
 527                 break;
 528         default:
 529                 BUG();
 530         }
 531
 532         /*
 533          * Enable gamma to match primary/cursor plane behaviour.
 534          * FIXME should be user controllable via propertiesa.
 535          */
 536         sprctl |= SPRITE_GAMMA_ENABLE;
 537
 538         if (obj->tiling_mode != I915_TILING_NONE)
 539                 sprctl |= SPRITE_TILED;
 540
 541         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 542                 sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE;
 543         else
 544                 sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
 545
 546         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 547                 sprctl |= SPRITE_PIPE_CSC_ENABLE;
 548
 549         /* Sizes are 0 based */
 550         src_w--;
 551         src_h--;
 552         crtc_w--;
 553         crtc_h--;
 554
 555         if (crtc_w != src_w || crtc_h != src_h)
 556                 sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
 557
 558         linear_offset = y * fb->pitches[0] + x * cpp;
 559         sprsurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
 560                                                    fb->pitches[0], rotation);
 561         linear_offset -= sprsurf_offset;
 562
 563         if (rotation == BIT(DRM_ROTATE_180)) {
 564                 sprctl |= SPRITE_ROTATE_180;
 565
 566                 /* HSW and BDW does this automagically in hardware */
 567                 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
 568                         x += src_w;
 569                         y += src_h;
 570                         linear_offset += src_h * fb->pitches[0] + src_w * cpp;
 571                 }
 572         }
 573
 574         if (key->flags) {
 575                 I915_WRITE(SPRKEYVAL(pipe), key->min_value);
 576                 I915_WRITE(SPRKEYMAX(pipe), key->max_value);
 577                 I915_WRITE(SPRKEYMSK(pipe), key->channel_mask);
 578         }
 579
 580         if (key->flags & I915_SET_COLORKEY_DESTINATION)
 581                 sprctl |= SPRITE_DEST_KEY;
 582         else if (key->flags & I915_SET_COLORKEY_SOURCE)
 583                 sprctl |= SPRITE_SOURCE_KEY;
 584
 585         I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
 586         I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
 587
 588         /* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
 589          * register */
 590         if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 591                 I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
 592         else if (obj->tiling_mode != I915_TILING_NONE)
 593                 I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
 594         else
 595                 I915_WRITE(SPRLINOFF(pipe), linear_offset);
 596
 597         I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
 598         if (intel_plane->can_scale)
 599                 I915_WRITE(SPRSCALE(pipe), sprscale);
 600         I915_WRITE(SPRCTL(pipe), sprctl);
 601         I915_WRITE(SPRSURF(pipe),
 602                    i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
 603         POSTING_READ(SPRSURF(pipe));
 604 }
 605
 606 static void
 607 ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
 608 {
 609         struct drm_device *dev = plane->dev;
 610         struct drm_i915_private *dev_priv = dev->dev_private;
 611         struct intel_plane *intel_plane = to_intel_plane(plane);
 612         int pipe = intel_plane->pipe;
 613
 614         I915_WRITE(SPRCTL(pipe), 0);
 615         /* Can't leave the scaler enabled... */
 616         if (intel_plane->can_scale)
 617                 I915_WRITE(SPRSCALE(pipe), 0);
 618
 619         I915_WRITE(SPRSURF(pipe), 0);
 620         POSTING_READ(SPRSURF(pipe));
 621 }
 622
 623 static void
 624 ilk_update_plane(struct drm_plane *plane,
 625                  const struct intel_crtc_state *crtc_state,
 626                  const struct intel_plane_state *plane_state)
 627 {
 628         struct drm_device *dev = plane->dev;
 629         struct drm_i915_private *dev_priv = dev->dev_private;
 630         struct intel_plane *intel_plane = to_intel_plane(plane);
 631         struct drm_framebuffer *fb = plane_state->base.fb;
 632         struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 633         int pipe = intel_plane->pipe;
 634         u32 dvscntr, dvsscale;
 635         u32 dvssurf_offset, linear_offset;
 636         unsigned int rotation = plane_state->base.rotation;
 637         int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 638         const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
 639         int crtc_x = plane_state->dst.x1;
 640         int crtc_y = plane_state->dst.y1;
 641         uint32_t crtc_w = drm_rect_width(&plane_state->dst);
 642         uint32_t crtc_h = drm_rect_height(&plane_state->dst);
 643         uint32_t x = plane_state->src.x1 >> 16;
 644         uint32_t y = plane_state->src.y1 >> 16;
 645         uint32_t src_w = drm_rect_width(&plane_state->src) >> 16;
 646         uint32_t src_h = drm_rect_height(&plane_state->src) >> 16;
 647
 648         dvscntr = DVS_ENABLE;
 649
 650         switch (fb->pixel_format) {
 651         case DRM_FORMAT_XBGR8888:
 652                 dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
 653                 break;
 654         case DRM_FORMAT_XRGB8888:
 655                 dvscntr |= DVS_FORMAT_RGBX888;
 656                 break;
 657         case DRM_FORMAT_YUYV:
 658                 dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
 659                 break;
 660         case DRM_FORMAT_YVYU:
 661                 dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
 662                 break;
 663         case DRM_FORMAT_UYVY:
 664                 dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
 665                 break;
 666         case DRM_FORMAT_VYUY:
 667                 dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
 668                 break;
 669         default:
 670                 BUG();
 671         }
 672
 673         /*
 674          * Enable gamma to match primary/cursor plane behaviour.
 675          * FIXME should be user controllable via propertiesa.
 676          */
 677         dvscntr |= DVS_GAMMA_ENABLE;
 678
 679         if (obj->tiling_mode != I915_TILING_NONE)
 680                 dvscntr |= DVS_TILED;
 681
 682         if (IS_GEN6(dev))
 683                 dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */
 684
 685         /* Sizes are 0 based */
 686         src_w--;
 687         src_h--;
 688         crtc_w--;
 689         crtc_h--;
 690
 691         dvsscale = 0;
 692         if (crtc_w != src_w || crtc_h != src_h)
 693                 dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
 694
 695         linear_offset = y * fb->pitches[0] + x * cpp;
 696         dvssurf_offset = intel_compute_tile_offset(&x, &y, fb, 0,
 697                                                    fb->pitches[0], rotation);
 698         linear_offset -= dvssurf_offset;
 699
 700         if (rotation == BIT(DRM_ROTATE_180)) {
 701                 dvscntr |= DVS_ROTATE_180;
 702
 703                 x += src_w;
 704                 y += src_h;
 705                 linear_offset += src_h * fb->pitches[0] + src_w * cpp;
 706         }
 707
 708         if (key->flags) {
 709                 I915_WRITE(DVSKEYVAL(pipe), key->min_value);
 710                 I915_WRITE(DVSKEYMAX(pipe), key->max_value);
 711                 I915_WRITE(DVSKEYMSK(pipe), key->channel_mask);
 712         }
 713
 714         if (key->flags & I915_SET_COLORKEY_DESTINATION)
 715                 dvscntr |= DVS_DEST_KEY;
 716         else if (key->flags & I915_SET_COLORKEY_SOURCE)
 717                 dvscntr |= DVS_SOURCE_KEY;
 718
 719         I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
 720         I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 721
 722         if (obj->tiling_mode != I915_TILING_NONE)
 723                 I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
 724         else
 725                 I915_WRITE(DVSLINOFF(pipe), linear_offset);
 726
 727         I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
 728         I915_WRITE(DVSSCALE(pipe), dvsscale);
 729         I915_WRITE(DVSCNTR(pipe), dvscntr);
 730         I915_WRITE(DVSSURF(pipe),
 731                    i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
 732         POSTING_READ(DVSSURF(pipe));
 733 }
 734
 735 static void
 736 ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
 737 {
 738         struct drm_device *dev = plane->dev;
 739         struct drm_i915_private *dev_priv = dev->dev_private;
 740         struct intel_plane *intel_plane = to_intel_plane(plane);
 741         int pipe = intel_plane->pipe;
 742
 743         I915_WRITE(DVSCNTR(pipe), 0);
 744         /* Disable the scaler */
 745         I915_WRITE(DVSSCALE(pipe), 0);
 746
 747         I915_WRITE(DVSSURF(pipe), 0);
 748         POSTING_READ(DVSSURF(pipe));
 749 }
 750
 751 static int
 752 intel_check_sprite_plane(struct drm_plane *plane,
 753                          struct intel_crtc_state *crtc_state,
 754                          struct intel_plane_state *state)
 755 {
 756         struct drm_device *dev = plane->dev;
 757         struct drm_crtc *crtc = state->base.crtc;
 758         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 759         struct intel_plane *intel_plane = to_intel_plane(plane);
 760         struct drm_framebuffer *fb = state->base.fb;
 761         int crtc_x, crtc_y;
 762         unsigned int crtc_w, crtc_h;
 763         uint32_t src_x, src_y, src_w, src_h;
 764         struct drm_rect *src = &state->src;
 765         struct drm_rect *dst = &state->dst;
 766         const struct drm_rect *clip = &state->clip;
 767         int hscale, vscale;
 768         int max_scale, min_scale;
 769         bool can_scale;
 770
 771         if (!fb) {
 772                 state->visible = false;
 773                 return 0;
 774         }
 775
 776         /* Don't modify another pipe's plane */
 777         if (intel_plane->pipe != intel_crtc->pipe) {
 778                 DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n");
 779                 return -EINVAL;
 780         }
 781
 782         /* FIXME check all gen limits */
 783         if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
 784                 DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n");
 785                 return -EINVAL;
 786         }
 787
 788         /* setup can_scale, min_scale, max_scale */
 789         if (INTEL_INFO(dev)->gen >= 9) {
 790                 /* use scaler when colorkey is not required */
 791                 if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 792                         can_scale = 1;
 793                         min_scale = 1;
 794                         max_scale = skl_max_scale(intel_crtc, crtc_state);
 795                 } else {
 796                         can_scale = 0;
 797                         min_scale = DRM_PLANE_HELPER_NO_SCALING;
 798                         max_scale = DRM_PLANE_HELPER_NO_SCALING;
 799                 }
 800         } else {
 801                 can_scale = intel_plane->can_scale;
 802                 max_scale = intel_plane->max_downscale << 16;
 803                 min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 804         }
 805
 806         /*
 807          * FIXME the following code does a bunch of fuzzy adjustments to the
 808          * coordinates and sizes. We probably need some way to decide whether
 809          * more strict checking should be done instead.
 810          */
 811         drm_rect_rotate(src, fb->width << 16, fb->height << 16,
 812                         state->base.rotation);
 813
 814         hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
 815         BUG_ON(hscale < 0);
 816
 817         vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
 818         BUG_ON(vscale < 0);
 819
 820         state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
 821
 822         crtc_x = dst->x1;
 823         crtc_y = dst->y1;
 824         crtc_w = drm_rect_width(dst);
 825         crtc_h = drm_rect_height(dst);
 826
 827         if (state->visible) {
 828                 /* check again in case clipping clamped the results */
 829                 hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
 830                 if (hscale < 0) {
 831                         DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
 832                         drm_rect_debug_print("src: ", src, true);
 833                         drm_rect_debug_print("dst: ", dst, false);
 834
 835                         return hscale;
 836                 }
 837
 838                 vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
 839                 if (vscale < 0) {
 840                         DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
 841                         drm_rect_debug_print("src: ", src, true);
 842                         drm_rect_debug_print("dst: ", dst, false);
 843
 844                         return vscale;
 845                 }
 846
 847                 /* Make the source viewport size an exact multiple of the scaling factors. */
 848                 drm_rect_adjust_size(src,
 849                                      drm_rect_width(dst) * hscale - drm_rect_width(src),
 850                                      drm_rect_height(dst) * vscale - drm_rect_height(src));
 851
 852                 drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
 853                                     state->base.rotation);
 854
 855                 /* sanity check to make sure the src viewport wasn't enlarged */
 856                 WARN_ON(src->x1 < (int) state->base.src_x ||
 857                         src->y1 < (int) state->base.src_y ||
 858                         src->x2 > (int) state->base.src_x + state->base.src_w ||
 859                         src->y2 > (int) state->base.src_y + state->base.src_h);
 860
 861                 /*
 862                  * Hardware doesn't handle subpixel coordinates.
 863                  * Adjust to (macro)pixel boundary, but be careful not to
 864                  * increase the source viewport size, because that could
 865                  * push the downscaling factor out of bounds.
 866                  */
 867                 src_x = src->x1 >> 16;
 868                 src_w = drm_rect_width(src) >> 16;
 869                 src_y = src->y1 >> 16;
 870                 src_h = drm_rect_height(src) >> 16;
 871
 872                 if (format_is_yuv(fb->pixel_format)) {
 873                         src_x &= ~1;
 874                         src_w &= ~1;
 875
 876                         /*
 877                          * Must keep src and dst the
 878                          * same if we can't scale.
 879                          */
 880                         if (!can_scale)
 881                                 crtc_w &= ~1;
 882
 883                         if (crtc_w == 0)
 884                                 state->visible = false;
 885                 }
 886         }
 887
 888         /* Check size restrictions when scaling */
 889         if (state->visible && (src_w != crtc_w || src_h != crtc_h)) {
 890                 unsigned int width_bytes;
 891                 int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 892
 893                 WARN_ON(!can_scale);
 894
 895                 /* FIXME interlacing min height is 6 */
 896
 897                 if (crtc_w < 3 || crtc_h < 3)
 898                         state->visible = false;
 899
 900                 if (src_w < 3 || src_h < 3)
 901                         state->visible = false;
 902
 903                 width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
 904
 905                 if (INTEL_INFO(dev)->gen < 9 && (src_w > 2048 || src_h > 2048 ||
 906                     width_bytes > 4096 || fb->pitches[0] > 4096)) {
 907                         DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
 908                         return -EINVAL;
 909                 }
 910         }
 911
 912         if (state->visible) {
 913                 src->x1 = src_x << 16;
 914                 src->x2 = (src_x + src_w) << 16;
 915                 src->y1 = src_y << 16;
 916                 src->y2 = (src_y + src_h) << 16;
 917         }
 918
 919         dst->x1 = crtc_x;
 920         dst->x2 = crtc_x + crtc_w;
 921         dst->y1 = crtc_y;
 922         dst->y2 = crtc_y + crtc_h;
 923
 924         return 0;
 925 }
 926
 927 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 928                               struct drm_file *file_priv)
 929 {
 930         struct drm_intel_sprite_colorkey *set = data;
 931         struct drm_plane *plane;
 932         struct drm_plane_state *plane_state;
 933         struct drm_atomic_state *state;
 934         struct drm_modeset_acquire_ctx ctx;
 935         int ret = 0;
 936
 937         /* Make sure we don't try to enable both src & dest simultaneously */
 938         if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
 939                 return -EINVAL;
 940
 941         if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
 942             set->flags & I915_SET_COLORKEY_DESTINATION)
 943                 return -EINVAL;
 944
 945         plane = drm_plane_find(dev, set->plane_id);
 946         if (!plane || plane->type != DRM_PLANE_TYPE_OVERLAY)
 947                 return -ENOENT;
 948
 949         drm_modeset_acquire_init(&ctx, 0);
 950
 951         state = drm_atomic_state_alloc(plane->dev);
 952         if (!state) {
 953                 ret = -ENOMEM;
 954                 goto out;
 955         }
 956         state->acquire_ctx = &ctx;
 957
 958         while (1) {
 959                 plane_state = drm_atomic_get_plane_state(state, plane);
 960                 ret = PTR_ERR_OR_ZERO(plane_state);
 961                 if (!ret) {
 962                         to_intel_plane_state(plane_state)->ckey = *set;
 963                         ret = drm_atomic_commit(state);
 964                 }
 965
 966                 if (ret != -EDEADLK)
 967                         break;
 968
 969                 drm_atomic_state_clear(state);
 970                 drm_modeset_backoff(&ctx);
 971         }
 972
 973         if (ret)
 974                 drm_atomic_state_free(state);
 975
 976 out:
 977         drm_modeset_drop_locks(&ctx);
 978         drm_modeset_acquire_fini(&ctx);
 979         return ret;
 980 }
 981
 982 static const uint32_t ilk_plane_formats[] = {
 983         DRM_FORMAT_XRGB8888,
 984         DRM_FORMAT_YUYV,
 985         DRM_FORMAT_YVYU,
 986         DRM_FORMAT_UYVY,
 987         DRM_FORMAT_VYUY,
 988 };
 989
 990 static const uint32_t snb_plane_formats[] = {
 991         DRM_FORMAT_XBGR8888,
 992         DRM_FORMAT_XRGB8888,
 993         DRM_FORMAT_YUYV,
 994         DRM_FORMAT_YVYU,
 995         DRM_FORMAT_UYVY,
 996         DRM_FORMAT_VYUY,
 997 };
 998
 999 static const uint32_t vlv_plane_formats[] = {
1000         DRM_FORMAT_RGB565,
1001         DRM_FORMAT_ABGR8888,
1002         DRM_FORMAT_ARGB8888,
1003         DRM_FORMAT_XBGR8888,
1004         DRM_FORMAT_XRGB8888,
1005         DRM_FORMAT_XBGR2101010,
1006         DRM_FORMAT_ABGR2101010,
1007         DRM_FORMAT_YUYV,
1008         DRM_FORMAT_YVYU,
1009         DRM_FORMAT_UYVY,
1010         DRM_FORMAT_VYUY,
1011 };
1012
1013 static uint32_t skl_plane_formats[] = {
1014         DRM_FORMAT_RGB565,
1015         DRM_FORMAT_ABGR8888,
1016         DRM_FORMAT_ARGB8888,
1017         DRM_FORMAT_XBGR8888,
1018         DRM_FORMAT_XRGB8888,
1019         DRM_FORMAT_YUYV,
1020         DRM_FORMAT_YVYU,
1021         DRM_FORMAT_UYVY,
1022         DRM_FORMAT_VYUY,
1023 };
1024
1025 int
1026 intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
1027 {
1028         struct intel_plane *intel_plane = NULL;
1029         struct intel_plane_state *state = NULL;
1030         unsigned long possible_crtcs;
1031         const uint32_t *plane_formats;
1032         int num_plane_formats;
1033         int ret;
1034
1035         if (INTEL_INFO(dev)->gen < 5)
1036                 return -ENODEV;
1037
1038         intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL);
1039         if (!intel_plane) {
1040                 ret = -ENOMEM;
1041                 goto fail;
1042         }
1043
1044         state = intel_create_plane_state(&intel_plane->base);
1045         if (!state) {
1046                 ret = -ENOMEM;
1047                 goto fail;
1048         }
1049         intel_plane->base.state = &state->base;
1050
1051         switch (INTEL_INFO(dev)->gen) {
1052         case 5:
1053         case 6:
1054                 intel_plane->can_scale = true;
1055                 intel_plane->max_downscale = 16;
1056                 intel_plane->update_plane = ilk_update_plane;
1057                 intel_plane->disable_plane = ilk_disable_plane;
1058
1059                 if (IS_GEN6(dev)) {
1060                         plane_formats = snb_plane_formats;
1061                         num_plane_formats = ARRAY_SIZE(snb_plane_formats);
1062                 } else {
1063                         plane_formats = ilk_plane_formats;
1064                         num_plane_formats = ARRAY_SIZE(ilk_plane_formats);
1065                 }
1066                 break;
1067
1068         case 7:
1069         case 8:
1070                 if (IS_IVYBRIDGE(dev)) {
1071                         intel_plane->can_scale = true;
1072                         intel_plane->max_downscale = 2;
1073                 } else {
1074                         intel_plane->can_scale = false;
1075                         intel_plane->max_downscale = 1;
1076                 }
1077
1078                 if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
1079                         intel_plane->update_plane = vlv_update_plane;
1080                         intel_plane->disable_plane = vlv_disable_plane;
1081
1082                         plane_formats = vlv_plane_formats;
1083                         num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
1084                 } else {
1085                         intel_plane->update_plane = ivb_update_plane;
1086                         intel_plane->disable_plane = ivb_disable_plane;
1087
1088                         plane_formats = snb_plane_formats;
1089                         num_plane_formats = ARRAY_SIZE(snb_plane_formats);
1090                 }
1091                 break;
1092         case 9:
1093                 intel_plane->can_scale = true;
1094                 intel_plane->update_plane = skl_update_plane;
1095                 intel_plane->disable_plane = skl_disable_plane;
1096                 state->scaler_id = -1;
1097
1098                 plane_formats = skl_plane_formats;
1099                 num_plane_formats = ARRAY_SIZE(skl_plane_formats);
1100                 break;
1101         default:
1102                 MISSING_CASE(INTEL_INFO(dev)->gen);
1103                 ret = -ENODEV;
1104                 goto fail;
1105         }
1106
1107         intel_plane->pipe = pipe;
1108         intel_plane->plane = plane;
1109         intel_plane->frontbuffer_bit = INTEL_FRONTBUFFER_SPRITE(pipe, plane);
1110         intel_plane->check_plane = intel_check_sprite_plane;
1111
1112         possible_crtcs = (1 << pipe);
1113
1114         ret = drm_universal_plane_init(dev, &intel_plane->base, possible_crtcs,
1115                                        &intel_plane_funcs,
1116                                        plane_formats, num_plane_formats,
1117                                        DRM_PLANE_TYPE_OVERLAY, NULL);
1118         if (ret)
1119                 goto fail;
1120
1121         intel_create_rotation_property(dev, intel_plane);
1122
1123         drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
1124
1125         return 0;
1126
1127 fail:
1128         kfree(state);
1129         kfree(intel_plane);
1130
1131         return ret;
1132 }