2 * Copyright (C) 2015 Broadcom
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
10 * DOC: VC4 CRTC module
12 * In VC4, the Pixel Valve is what most closely corresponds to the
13 * DRM's concept of a CRTC. The PV generates video timings from the
14 * output's clock plus its configuration. It pulls scaled pixels from
15 * the HVS at that timing, and feeds it to the encoder.
17 * However, the DRM CRTC also collects the configuration of all the
18 * DRM planes attached to it. As a result, this file also manages
19 * setup of the VC4 HVS's display elements on the CRTC.
21 * The 2835 has 3 different pixel valves. pv0 in the audio power
22 * domain feeds DSI0 or DPI, while pv1 feeds DS1 or SMI. pv2 in the
23 * image domain can feed either HDMI or the SDTV controller. The
24 * pixel valve chooses from the CPRMAN clocks (HSM for HDMI, VEC for
25 * SDTV, etc.) according to which output type is chosen in the mux.
27 * For power management, the pixel valve's registers are all clocked
28 * by the AXI clock, while the timings and FIFOs make use of the
29 * output-specific clock. Since the encoders also directly consume
30 * the CPRMAN clocks, and know what timings they need, they are the
31 * ones that set the clock.
34 #include "drm_atomic.h"
35 #include "drm_atomic_helper.h"
36 #include "drm_crtc_helper.h"
37 #include "linux/clk.h"
38 #include "drm_fb_cma_helper.h"
39 #include "linux/component.h"
40 #include "linux/of_device.h"
46 const struct vc4_crtc_data
*data
;
49 /* Which HVS channel we're using for our CRTC. */
56 struct drm_pending_vblank_event
*event
;
59 struct vc4_crtc_state
{
60 struct drm_crtc_state base
;
61 /* Dlist area for this CRTC configuration. */
62 struct drm_mm_node mm
;
65 static inline struct vc4_crtc
*
66 to_vc4_crtc(struct drm_crtc
*crtc
)
68 return (struct vc4_crtc
*)crtc
;
71 static inline struct vc4_crtc_state
*
72 to_vc4_crtc_state(struct drm_crtc_state
*crtc_state
)
74 return (struct vc4_crtc_state
*)crtc_state
;
77 struct vc4_crtc_data
{
78 /* Which channel of the HVS this pixelvalve sources from. */
81 enum vc4_encoder_type encoder0_type
;
82 enum vc4_encoder_type encoder1_type
;
85 #define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
86 #define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
88 #define CRTC_REG(reg) { reg, #reg }
94 CRTC_REG(PV_V_CONTROL
),
95 CRTC_REG(PV_VSYNCD_EVEN
),
100 CRTC_REG(PV_VERTA_EVEN
),
101 CRTC_REG(PV_VERTB_EVEN
),
103 CRTC_REG(PV_INTSTAT
),
105 CRTC_REG(PV_HACT_ACT
),
108 static void vc4_crtc_dump_regs(struct vc4_crtc
*vc4_crtc
)
112 for (i
= 0; i
< ARRAY_SIZE(crtc_regs
); i
++) {
113 DRM_INFO("0x%04x (%s): 0x%08x\n",
114 crtc_regs
[i
].reg
, crtc_regs
[i
].name
,
115 CRTC_READ(crtc_regs
[i
].reg
));
119 #ifdef CONFIG_DEBUG_FS
120 int vc4_crtc_debugfs_regs(struct seq_file
*m
, void *unused
)
122 struct drm_info_node
*node
= (struct drm_info_node
*)m
->private;
123 struct drm_device
*dev
= node
->minor
->dev
;
124 int crtc_index
= (uintptr_t)node
->info_ent
->data
;
125 struct drm_crtc
*crtc
;
126 struct vc4_crtc
*vc4_crtc
;
130 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
137 vc4_crtc
= to_vc4_crtc(crtc
);
139 for (i
= 0; i
< ARRAY_SIZE(crtc_regs
); i
++) {
140 seq_printf(m
, "%s (0x%04x): 0x%08x\n",
141 crtc_regs
[i
].name
, crtc_regs
[i
].reg
,
142 CRTC_READ(crtc_regs
[i
].reg
));
149 static void vc4_crtc_destroy(struct drm_crtc
*crtc
)
151 drm_crtc_cleanup(crtc
);
155 vc4_crtc_lut_load(struct drm_crtc
*crtc
)
157 struct drm_device
*dev
= crtc
->dev
;
158 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
159 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
162 /* The LUT memory is laid out with each HVS channel in order,
163 * each of which takes 256 writes for R, 256 for G, then 256
166 HVS_WRITE(SCALER_GAMADDR
,
167 SCALER_GAMADDR_AUTOINC
|
168 (vc4_crtc
->channel
* 3 * crtc
->gamma_size
));
170 for (i
= 0; i
< crtc
->gamma_size
; i
++)
171 HVS_WRITE(SCALER_GAMDATA
, vc4_crtc
->lut_r
[i
]);
172 for (i
= 0; i
< crtc
->gamma_size
; i
++)
173 HVS_WRITE(SCALER_GAMDATA
, vc4_crtc
->lut_g
[i
]);
174 for (i
= 0; i
< crtc
->gamma_size
; i
++)
175 HVS_WRITE(SCALER_GAMDATA
, vc4_crtc
->lut_b
[i
]);
179 vc4_crtc_gamma_set(struct drm_crtc
*crtc
, u16
*r
, u16
*g
, u16
*b
,
180 uint32_t start
, uint32_t size
)
182 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
185 for (i
= start
; i
< start
+ size
; i
++) {
186 vc4_crtc
->lut_r
[i
] = r
[i
] >> 8;
187 vc4_crtc
->lut_g
[i
] = g
[i
] >> 8;
188 vc4_crtc
->lut_b
[i
] = b
[i
] >> 8;
191 vc4_crtc_lut_load(crtc
);
194 static u32
vc4_get_fifo_full_level(u32 format
)
196 static const u32 fifo_len_bytes
= 64;
197 static const u32 hvs_latency_pix
= 6;
200 case PV_CONTROL_FORMAT_DSIV_16
:
201 case PV_CONTROL_FORMAT_DSIC_16
:
202 return fifo_len_bytes
- 2 * hvs_latency_pix
;
203 case PV_CONTROL_FORMAT_DSIV_18
:
204 return fifo_len_bytes
- 14;
205 case PV_CONTROL_FORMAT_24
:
206 case PV_CONTROL_FORMAT_DSIV_24
:
208 return fifo_len_bytes
- 3 * hvs_latency_pix
;
213 * Returns the clock select bit for the connector attached to the
216 static int vc4_get_clock_select(struct drm_crtc
*crtc
)
218 struct drm_connector
*connector
;
220 drm_for_each_connector(connector
, crtc
->dev
) {
221 if (connector
->state
->crtc
== crtc
) {
222 struct drm_encoder
*encoder
= connector
->encoder
;
223 struct vc4_encoder
*vc4_encoder
=
224 to_vc4_encoder(encoder
);
226 return vc4_encoder
->clock_select
;
233 static void vc4_crtc_mode_set_nofb(struct drm_crtc
*crtc
)
235 struct drm_device
*dev
= crtc
->dev
;
236 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
237 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
238 struct drm_crtc_state
*state
= crtc
->state
;
239 struct drm_display_mode
*mode
= &state
->adjusted_mode
;
240 bool interlace
= mode
->flags
& DRM_MODE_FLAG_INTERLACE
;
241 u32 vactive
= (mode
->vdisplay
>> (interlace
? 1 : 0));
242 u32 format
= PV_CONTROL_FORMAT_24
;
243 bool debug_dump_regs
= false;
244 int clock_select
= vc4_get_clock_select(crtc
);
246 if (debug_dump_regs
) {
247 DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc
));
248 vc4_crtc_dump_regs(vc4_crtc
);
251 /* Reset the PV fifo. */
252 CRTC_WRITE(PV_CONTROL
, 0);
253 CRTC_WRITE(PV_CONTROL
, PV_CONTROL_FIFO_CLR
| PV_CONTROL_EN
);
254 CRTC_WRITE(PV_CONTROL
, 0);
257 VC4_SET_FIELD(mode
->htotal
- mode
->hsync_end
,
259 VC4_SET_FIELD(mode
->hsync_end
- mode
->hsync_start
,
262 VC4_SET_FIELD(mode
->hsync_start
- mode
->hdisplay
,
264 VC4_SET_FIELD(mode
->hdisplay
, PV_HORZB_HACTIVE
));
267 VC4_SET_FIELD(mode
->vtotal
- mode
->vsync_end
,
269 VC4_SET_FIELD(mode
->vsync_end
- mode
->vsync_start
,
272 VC4_SET_FIELD(mode
->vsync_start
- mode
->vdisplay
,
274 VC4_SET_FIELD(vactive
, PV_VERTB_VACTIVE
));
277 CRTC_WRITE(PV_VERTA_EVEN
,
278 VC4_SET_FIELD(mode
->vtotal
- mode
->vsync_end
- 1,
280 VC4_SET_FIELD(mode
->vsync_end
- mode
->vsync_start
,
282 CRTC_WRITE(PV_VERTB_EVEN
,
283 VC4_SET_FIELD(mode
->vsync_start
- mode
->vdisplay
,
285 VC4_SET_FIELD(vactive
, PV_VERTB_VACTIVE
));
288 CRTC_WRITE(PV_HACT_ACT
, mode
->hdisplay
);
290 CRTC_WRITE(PV_V_CONTROL
,
291 PV_VCONTROL_CONTINUOUS
|
292 (interlace
? PV_VCONTROL_INTERLACE
: 0));
294 CRTC_WRITE(PV_CONTROL
,
295 VC4_SET_FIELD(format
, PV_CONTROL_FORMAT
) |
296 VC4_SET_FIELD(vc4_get_fifo_full_level(format
),
297 PV_CONTROL_FIFO_LEVEL
) |
298 PV_CONTROL_CLR_AT_START
|
299 PV_CONTROL_TRIGGER_UNDERFLOW
|
300 PV_CONTROL_WAIT_HSTART
|
301 VC4_SET_FIELD(clock_select
, PV_CONTROL_CLK_SELECT
) |
302 PV_CONTROL_FIFO_CLR
|
305 HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc
->channel
),
306 SCALER_DISPBKGND_AUTOHS
|
307 SCALER_DISPBKGND_GAMMA
|
308 (interlace
? SCALER_DISPBKGND_INTERLACE
: 0));
310 /* Reload the LUT, since the SRAMs would have been disabled if
311 * all CRTCs had SCALER_DISPBKGND_GAMMA unset at once.
313 vc4_crtc_lut_load(crtc
);
315 if (debug_dump_regs
) {
316 DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc
));
317 vc4_crtc_dump_regs(vc4_crtc
);
321 static void require_hvs_enabled(struct drm_device
*dev
)
323 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
325 WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL
) & SCALER_DISPCTRL_ENABLE
) !=
326 SCALER_DISPCTRL_ENABLE
);
329 static void vc4_crtc_disable(struct drm_crtc
*crtc
)
331 struct drm_device
*dev
= crtc
->dev
;
332 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
333 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
334 u32 chan
= vc4_crtc
->channel
;
336 require_hvs_enabled(dev
);
338 CRTC_WRITE(PV_V_CONTROL
,
339 CRTC_READ(PV_V_CONTROL
) & ~PV_VCONTROL_VIDEN
);
340 ret
= wait_for(!(CRTC_READ(PV_V_CONTROL
) & PV_VCONTROL_VIDEN
), 1);
341 WARN_ONCE(ret
, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
343 if (HVS_READ(SCALER_DISPCTRLX(chan
)) &
344 SCALER_DISPCTRLX_ENABLE
) {
345 HVS_WRITE(SCALER_DISPCTRLX(chan
),
346 SCALER_DISPCTRLX_RESET
);
348 /* While the docs say that reset is self-clearing, it
349 * seems it doesn't actually.
351 HVS_WRITE(SCALER_DISPCTRLX(chan
), 0);
354 /* Once we leave, the scaler should be disabled and its fifo empty. */
356 WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan
)) & SCALER_DISPCTRLX_RESET
);
358 WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan
)),
359 SCALER_DISPSTATX_MODE
) !=
360 SCALER_DISPSTATX_MODE_DISABLED
);
362 WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan
)) &
363 (SCALER_DISPSTATX_FULL
| SCALER_DISPSTATX_EMPTY
)) !=
364 SCALER_DISPSTATX_EMPTY
);
367 static void vc4_crtc_enable(struct drm_crtc
*crtc
)
369 struct drm_device
*dev
= crtc
->dev
;
370 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
371 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
372 struct drm_crtc_state
*state
= crtc
->state
;
373 struct drm_display_mode
*mode
= &state
->adjusted_mode
;
375 require_hvs_enabled(dev
);
377 /* Turn on the scaler, which will wait for vstart to start
380 HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc
->channel
),
381 VC4_SET_FIELD(mode
->hdisplay
, SCALER_DISPCTRLX_WIDTH
) |
382 VC4_SET_FIELD(mode
->vdisplay
, SCALER_DISPCTRLX_HEIGHT
) |
383 SCALER_DISPCTRLX_ENABLE
);
385 /* Turn on the pixel valve, which will emit the vstart signal. */
386 CRTC_WRITE(PV_V_CONTROL
,
387 CRTC_READ(PV_V_CONTROL
) | PV_VCONTROL_VIDEN
);
390 static int vc4_crtc_atomic_check(struct drm_crtc
*crtc
,
391 struct drm_crtc_state
*state
)
393 struct vc4_crtc_state
*vc4_state
= to_vc4_crtc_state(state
);
394 struct drm_device
*dev
= crtc
->dev
;
395 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
396 struct drm_plane
*plane
;
401 /* The pixelvalve can only feed one encoder (and encoders are
402 * 1:1 with connectors.)
404 if (hweight32(state
->connector_mask
) > 1)
407 drm_atomic_crtc_state_for_each_plane(plane
, state
) {
408 struct drm_plane_state
*plane_state
=
409 state
->state
->plane_states
[drm_plane_index(plane
)];
411 /* plane might not have changed, in which case take
415 plane_state
= plane
->state
;
417 dlist_count
+= vc4_plane_dlist_size(plane_state
);
420 dlist_count
++; /* Account for SCALER_CTL0_END. */
422 spin_lock_irqsave(&vc4
->hvs
->mm_lock
, flags
);
423 ret
= drm_mm_insert_node(&vc4
->hvs
->dlist_mm
, &vc4_state
->mm
,
425 spin_unlock_irqrestore(&vc4
->hvs
->mm_lock
, flags
);
432 static void vc4_crtc_atomic_flush(struct drm_crtc
*crtc
,
433 struct drm_crtc_state
*old_state
)
435 struct drm_device
*dev
= crtc
->dev
;
436 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
437 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
438 struct vc4_crtc_state
*vc4_state
= to_vc4_crtc_state(crtc
->state
);
439 struct drm_plane
*plane
;
440 bool debug_dump_regs
= false;
441 u32 __iomem
*dlist_start
= vc4
->hvs
->dlist
+ vc4_state
->mm
.start
;
442 u32 __iomem
*dlist_next
= dlist_start
;
444 if (debug_dump_regs
) {
445 DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc
));
446 vc4_hvs_dump_state(dev
);
449 /* Copy all the active planes' dlist contents to the hardware dlist. */
450 drm_atomic_crtc_for_each_plane(plane
, crtc
) {
451 dlist_next
+= vc4_plane_write_dlist(plane
, dlist_next
);
454 writel(SCALER_CTL0_END
, dlist_next
);
457 WARN_ON_ONCE(dlist_next
- dlist_start
!= vc4_state
->mm
.size
);
459 HVS_WRITE(SCALER_DISPLISTX(vc4_crtc
->channel
),
460 vc4_state
->mm
.start
);
462 if (debug_dump_regs
) {
463 DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc
));
464 vc4_hvs_dump_state(dev
);
467 if (crtc
->state
->event
) {
470 crtc
->state
->event
->pipe
= drm_crtc_index(crtc
);
472 WARN_ON(drm_crtc_vblank_get(crtc
) != 0);
474 spin_lock_irqsave(&dev
->event_lock
, flags
);
475 vc4_crtc
->event
= crtc
->state
->event
;
476 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
477 crtc
->state
->event
= NULL
;
481 int vc4_enable_vblank(struct drm_device
*dev
, unsigned int crtc_id
)
483 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
484 struct vc4_crtc
*vc4_crtc
= vc4
->crtc
[crtc_id
];
486 CRTC_WRITE(PV_INTEN
, PV_INT_VFP_START
);
491 void vc4_disable_vblank(struct drm_device
*dev
, unsigned int crtc_id
)
493 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
494 struct vc4_crtc
*vc4_crtc
= vc4
->crtc
[crtc_id
];
496 CRTC_WRITE(PV_INTEN
, 0);
499 static void vc4_crtc_handle_page_flip(struct vc4_crtc
*vc4_crtc
)
501 struct drm_crtc
*crtc
= &vc4_crtc
->base
;
502 struct drm_device
*dev
= crtc
->dev
;
505 spin_lock_irqsave(&dev
->event_lock
, flags
);
506 if (vc4_crtc
->event
) {
507 drm_crtc_send_vblank_event(crtc
, vc4_crtc
->event
);
508 vc4_crtc
->event
= NULL
;
510 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
513 static irqreturn_t
vc4_crtc_irq_handler(int irq
, void *data
)
515 struct vc4_crtc
*vc4_crtc
= data
;
516 u32 stat
= CRTC_READ(PV_INTSTAT
);
517 irqreturn_t ret
= IRQ_NONE
;
519 if (stat
& PV_INT_VFP_START
) {
520 CRTC_WRITE(PV_INTSTAT
, PV_INT_VFP_START
);
521 drm_crtc_handle_vblank(&vc4_crtc
->base
);
522 vc4_crtc_handle_page_flip(vc4_crtc
);
529 struct vc4_async_flip_state
{
530 struct drm_crtc
*crtc
;
531 struct drm_framebuffer
*fb
;
532 struct drm_pending_vblank_event
*event
;
534 struct vc4_seqno_cb cb
;
537 /* Called when the V3D execution for the BO being flipped to is done, so that
538 * we can actually update the plane's address to point to it.
541 vc4_async_page_flip_complete(struct vc4_seqno_cb
*cb
)
543 struct vc4_async_flip_state
*flip_state
=
544 container_of(cb
, struct vc4_async_flip_state
, cb
);
545 struct drm_crtc
*crtc
= flip_state
->crtc
;
546 struct drm_device
*dev
= crtc
->dev
;
547 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
548 struct drm_plane
*plane
= crtc
->primary
;
550 vc4_plane_async_set_fb(plane
, flip_state
->fb
);
551 if (flip_state
->event
) {
554 spin_lock_irqsave(&dev
->event_lock
, flags
);
555 drm_crtc_send_vblank_event(crtc
, flip_state
->event
);
556 spin_unlock_irqrestore(&dev
->event_lock
, flags
);
559 drm_framebuffer_unreference(flip_state
->fb
);
562 up(&vc4
->async_modeset
);
565 /* Implements async (non-vblank-synced) page flips.
567 * The page flip ioctl needs to return immediately, so we grab the
568 * modeset semaphore on the pipe, and queue the address update for
569 * when V3D is done with the BO being flipped to.
571 static int vc4_async_page_flip(struct drm_crtc
*crtc
,
572 struct drm_framebuffer
*fb
,
573 struct drm_pending_vblank_event
*event
,
576 struct drm_device
*dev
= crtc
->dev
;
577 struct vc4_dev
*vc4
= to_vc4_dev(dev
);
578 struct drm_plane
*plane
= crtc
->primary
;
580 struct vc4_async_flip_state
*flip_state
;
581 struct drm_gem_cma_object
*cma_bo
= drm_fb_cma_get_gem_obj(fb
, 0);
582 struct vc4_bo
*bo
= to_vc4_bo(&cma_bo
->base
);
584 flip_state
= kzalloc(sizeof(*flip_state
), GFP_KERNEL
);
588 drm_framebuffer_reference(fb
);
590 flip_state
->crtc
= crtc
;
591 flip_state
->event
= event
;
593 /* Make sure all other async modesetes have landed. */
594 ret
= down_interruptible(&vc4
->async_modeset
);
596 drm_framebuffer_unreference(fb
);
601 /* Immediately update the plane's legacy fb pointer, so that later
602 * modeset prep sees the state that will be present when the semaphore
605 drm_atomic_set_fb_for_plane(plane
->state
, fb
);
608 vc4_queue_seqno_cb(dev
, &flip_state
->cb
, bo
->seqno
,
609 vc4_async_page_flip_complete
);
611 /* Driver takes ownership of state on successful async commit. */
615 static int vc4_page_flip(struct drm_crtc
*crtc
,
616 struct drm_framebuffer
*fb
,
617 struct drm_pending_vblank_event
*event
,
620 if (flags
& DRM_MODE_PAGE_FLIP_ASYNC
)
621 return vc4_async_page_flip(crtc
, fb
, event
, flags
);
623 return drm_atomic_helper_page_flip(crtc
, fb
, event
, flags
);
626 static struct drm_crtc_state
*vc4_crtc_duplicate_state(struct drm_crtc
*crtc
)
628 struct vc4_crtc_state
*vc4_state
;
630 vc4_state
= kzalloc(sizeof(*vc4_state
), GFP_KERNEL
);
634 __drm_atomic_helper_crtc_duplicate_state(crtc
, &vc4_state
->base
);
635 return &vc4_state
->base
;
638 static void vc4_crtc_destroy_state(struct drm_crtc
*crtc
,
639 struct drm_crtc_state
*state
)
641 struct vc4_dev
*vc4
= to_vc4_dev(crtc
->dev
);
642 struct vc4_crtc_state
*vc4_state
= to_vc4_crtc_state(state
);
644 if (vc4_state
->mm
.allocated
) {
647 spin_lock_irqsave(&vc4
->hvs
->mm_lock
, flags
);
648 drm_mm_remove_node(&vc4_state
->mm
);
649 spin_unlock_irqrestore(&vc4
->hvs
->mm_lock
, flags
);
653 __drm_atomic_helper_crtc_destroy_state(state
);
656 static const struct drm_crtc_funcs vc4_crtc_funcs
= {
657 .set_config
= drm_atomic_helper_set_config
,
658 .destroy
= vc4_crtc_destroy
,
659 .page_flip
= vc4_page_flip
,
660 .set_property
= NULL
,
661 .cursor_set
= NULL
, /* handled by drm_mode_cursor_universal */
662 .cursor_move
= NULL
, /* handled by drm_mode_cursor_universal */
663 .reset
= drm_atomic_helper_crtc_reset
,
664 .atomic_duplicate_state
= vc4_crtc_duplicate_state
,
665 .atomic_destroy_state
= vc4_crtc_destroy_state
,
666 .gamma_set
= vc4_crtc_gamma_set
,
669 static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs
= {
670 .mode_set_nofb
= vc4_crtc_mode_set_nofb
,
671 .disable
= vc4_crtc_disable
,
672 .enable
= vc4_crtc_enable
,
673 .atomic_check
= vc4_crtc_atomic_check
,
674 .atomic_flush
= vc4_crtc_atomic_flush
,
677 static const struct vc4_crtc_data pv0_data
= {
679 .encoder0_type
= VC4_ENCODER_TYPE_DSI0
,
680 .encoder1_type
= VC4_ENCODER_TYPE_DPI
,
683 static const struct vc4_crtc_data pv1_data
= {
685 .encoder0_type
= VC4_ENCODER_TYPE_DSI1
,
686 .encoder1_type
= VC4_ENCODER_TYPE_SMI
,
689 static const struct vc4_crtc_data pv2_data
= {
691 .encoder0_type
= VC4_ENCODER_TYPE_VEC
,
692 .encoder1_type
= VC4_ENCODER_TYPE_HDMI
,
695 static const struct of_device_id vc4_crtc_dt_match
[] = {
696 { .compatible
= "brcm,bcm2835-pixelvalve0", .data
= &pv0_data
},
697 { .compatible
= "brcm,bcm2835-pixelvalve1", .data
= &pv1_data
},
698 { .compatible
= "brcm,bcm2835-pixelvalve2", .data
= &pv2_data
},
702 static void vc4_set_crtc_possible_masks(struct drm_device
*drm
,
703 struct drm_crtc
*crtc
)
705 struct vc4_crtc
*vc4_crtc
= to_vc4_crtc(crtc
);
706 struct drm_encoder
*encoder
;
708 drm_for_each_encoder(encoder
, drm
) {
709 struct vc4_encoder
*vc4_encoder
= to_vc4_encoder(encoder
);
711 if (vc4_encoder
->type
== vc4_crtc
->data
->encoder0_type
) {
712 vc4_encoder
->clock_select
= 0;
713 encoder
->possible_crtcs
|= drm_crtc_mask(crtc
);
714 } else if (vc4_encoder
->type
== vc4_crtc
->data
->encoder1_type
) {
715 vc4_encoder
->clock_select
= 1;
716 encoder
->possible_crtcs
|= drm_crtc_mask(crtc
);
721 static int vc4_crtc_bind(struct device
*dev
, struct device
*master
, void *data
)
723 struct platform_device
*pdev
= to_platform_device(dev
);
724 struct drm_device
*drm
= dev_get_drvdata(master
);
725 struct vc4_dev
*vc4
= to_vc4_dev(drm
);
726 struct vc4_crtc
*vc4_crtc
;
727 struct drm_crtc
*crtc
;
728 struct drm_plane
*primary_plane
, *cursor_plane
, *destroy_plane
, *temp
;
729 const struct of_device_id
*match
;
732 vc4_crtc
= devm_kzalloc(dev
, sizeof(*vc4_crtc
), GFP_KERNEL
);
735 crtc
= &vc4_crtc
->base
;
737 match
= of_match_device(vc4_crtc_dt_match
, dev
);
740 vc4_crtc
->data
= match
->data
;
742 vc4_crtc
->regs
= vc4_ioremap_regs(pdev
, 0);
743 if (IS_ERR(vc4_crtc
->regs
))
744 return PTR_ERR(vc4_crtc
->regs
);
746 /* For now, we create just the primary and the legacy cursor
747 * planes. We should be able to stack more planes on easily,
748 * but to do that we would need to compute the bandwidth
749 * requirement of the plane configuration, and reject ones
750 * that will take too much.
752 primary_plane
= vc4_plane_init(drm
, DRM_PLANE_TYPE_PRIMARY
);
753 if (IS_ERR(primary_plane
)) {
754 dev_err(dev
, "failed to construct primary plane\n");
755 ret
= PTR_ERR(primary_plane
);
759 drm_crtc_init_with_planes(drm
, crtc
, primary_plane
, NULL
,
760 &vc4_crtc_funcs
, NULL
);
761 drm_crtc_helper_add(crtc
, &vc4_crtc_helper_funcs
);
762 primary_plane
->crtc
= crtc
;
763 vc4
->crtc
[drm_crtc_index(crtc
)] = vc4_crtc
;
764 vc4_crtc
->channel
= vc4_crtc
->data
->hvs_channel
;
765 drm_mode_crtc_set_gamma_size(crtc
, ARRAY_SIZE(vc4_crtc
->lut_r
));
767 /* Set up some arbitrary number of planes. We're not limited
768 * by a set number of physical registers, just the space in
769 * the HVS (16k) and how small an plane can be (28 bytes).
770 * However, each plane we set up takes up some memory, and
771 * increases the cost of looping over planes, which atomic
772 * modesetting does quite a bit. As a result, we pick a
773 * modest number of planes to expose, that should hopefully
774 * still cover any sane usecase.
776 for (i
= 0; i
< 8; i
++) {
777 struct drm_plane
*plane
=
778 vc4_plane_init(drm
, DRM_PLANE_TYPE_OVERLAY
);
783 plane
->possible_crtcs
= 1 << drm_crtc_index(crtc
);
786 /* Set up the legacy cursor after overlay initialization,
787 * since we overlay planes on the CRTC in the order they were
790 cursor_plane
= vc4_plane_init(drm
, DRM_PLANE_TYPE_CURSOR
);
791 if (!IS_ERR(cursor_plane
)) {
792 cursor_plane
->possible_crtcs
= 1 << drm_crtc_index(crtc
);
793 cursor_plane
->crtc
= crtc
;
794 crtc
->cursor
= cursor_plane
;
797 CRTC_WRITE(PV_INTEN
, 0);
798 CRTC_WRITE(PV_INTSTAT
, PV_INT_VFP_START
);
799 ret
= devm_request_irq(dev
, platform_get_irq(pdev
, 0),
800 vc4_crtc_irq_handler
, 0, "vc4 crtc", vc4_crtc
);
802 goto err_destroy_planes
;
804 vc4_set_crtc_possible_masks(drm
, crtc
);
806 for (i
= 0; i
< crtc
->gamma_size
; i
++) {
807 vc4_crtc
->lut_r
[i
] = i
;
808 vc4_crtc
->lut_g
[i
] = i
;
809 vc4_crtc
->lut_b
[i
] = i
;
812 platform_set_drvdata(pdev
, vc4_crtc
);
817 list_for_each_entry_safe(destroy_plane
, temp
,
818 &drm
->mode_config
.plane_list
, head
) {
819 if (destroy_plane
->possible_crtcs
== 1 << drm_crtc_index(crtc
))
820 destroy_plane
->funcs
->destroy(destroy_plane
);
826 static void vc4_crtc_unbind(struct device
*dev
, struct device
*master
,
829 struct platform_device
*pdev
= to_platform_device(dev
);
830 struct vc4_crtc
*vc4_crtc
= dev_get_drvdata(dev
);
832 vc4_crtc_destroy(&vc4_crtc
->base
);
834 CRTC_WRITE(PV_INTEN
, 0);
836 platform_set_drvdata(pdev
, NULL
);
839 static const struct component_ops vc4_crtc_ops
= {
840 .bind
= vc4_crtc_bind
,
841 .unbind
= vc4_crtc_unbind
,
844 static int vc4_crtc_dev_probe(struct platform_device
*pdev
)
846 return component_add(&pdev
->dev
, &vc4_crtc_ops
);
849 static int vc4_crtc_dev_remove(struct platform_device
*pdev
)
851 component_del(&pdev
->dev
, &vc4_crtc_ops
);
855 struct platform_driver vc4_crtc_driver
= {
856 .probe
= vc4_crtc_dev_probe
,
857 .remove
= vc4_crtc_dev_remove
,
860 .of_match_table
= vc4_crtc_dt_match
,