drivers/gpu/ipu-v3/ipu-di.c

   1 /*
   2  * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
   3  * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License as published by the
   7  * Free Software Foundation; either version 2 of the License, or (at your
   8  * option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  12  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  13  * for more details.
  14  */
  15 #include <linux/export.h>
  16 #include <linux/module.h>
  17 #include <linux/types.h>
  18 #include <linux/errno.h>
  19 #include <linux/io.h>
  20 #include <linux/err.h>
  21 #include <linux/platform_device.h>
  22
  23 #include <video/imx-ipu-v3.h>
  24 #include "ipu-prv.h"
  25
  26 struct ipu_di {
  27         void __iomem *base;
  28         int id;
  29         u32 module;
  30         struct clk *clk_di;     /* display input clock */
  31         struct clk *clk_ipu;    /* IPU bus clock */
  32         struct clk *clk_di_pixel; /* resulting pixel clock */
  33         bool inuse;
  34         struct ipu_soc *ipu;
  35 };
  36
  37 static DEFINE_MUTEX(di_mutex);
  38
  39 struct di_sync_config {
  40         int run_count;
  41         int run_src;
  42         int offset_count;
  43         int offset_src;
  44         int repeat_count;
  45         int cnt_clr_src;
  46         int cnt_polarity_gen_en;
  47         int cnt_polarity_clr_src;
  48         int cnt_polarity_trigger_src;
  49         int cnt_up;
  50         int cnt_down;
  51 };
  52
  53 enum di_pins {
  54         DI_PIN11 = 0,
  55         DI_PIN12 = 1,
  56         DI_PIN13 = 2,
  57         DI_PIN14 = 3,
  58         DI_PIN15 = 4,
  59         DI_PIN16 = 5,
  60         DI_PIN17 = 6,
  61         DI_PIN_CS = 7,
  62
  63         DI_PIN_SER_CLK = 0,
  64         DI_PIN_SER_RS = 1,
  65 };
  66
  67 enum di_sync_wave {
  68         DI_SYNC_NONE = 0,
  69         DI_SYNC_CLK = 1,
  70         DI_SYNC_INT_HSYNC = 2,
  71         DI_SYNC_HSYNC = 3,
  72         DI_SYNC_VSYNC = 4,
  73         DI_SYNC_DE = 6,
  74
  75         DI_SYNC_CNT1 = 2,       /* counter >= 2 only */
  76         DI_SYNC_CNT4 = 5,       /* counter >= 5 only */
  77         DI_SYNC_CNT5 = 6,       /* counter >= 6 only */
  78 };
  79
  80 #define SYNC_WAVE 0
  81
  82 #define DI_GENERAL              0x0000
  83 #define DI_BS_CLKGEN0           0x0004
  84 #define DI_BS_CLKGEN1           0x0008
  85 #define DI_SW_GEN0(gen)         (0x000c + 4 * ((gen) - 1))
  86 #define DI_SW_GEN1(gen)         (0x0030 + 4 * ((gen) - 1))
  87 #define DI_STP_REP(gen)         (0x0148 + 4 * (((gen) - 1)/2))
  88 #define DI_SYNC_AS_GEN          0x0054
  89 #define DI_DW_GEN(gen)          (0x0058 + 4 * (gen))
  90 #define DI_DW_SET(gen, set)     (0x0088 + 4 * ((gen) + 0xc * (set)))
  91 #define DI_SER_CONF             0x015c
  92 #define DI_SSC                  0x0160
  93 #define DI_POL                  0x0164
  94 #define DI_AW0                  0x0168
  95 #define DI_AW1                  0x016c
  96 #define DI_SCR_CONF             0x0170
  97 #define DI_STAT                 0x0174
  98
  99 #define DI_SW_GEN0_RUN_COUNT(x)                 ((x) << 19)
 100 #define DI_SW_GEN0_RUN_SRC(x)                   ((x) << 16)
 101 #define DI_SW_GEN0_OFFSET_COUNT(x)              ((x) << 3)
 102 #define DI_SW_GEN0_OFFSET_SRC(x)                ((x) << 0)
 103
 104 #define DI_SW_GEN1_CNT_POL_GEN_EN(x)            ((x) << 29)
 105 #define DI_SW_GEN1_CNT_CLR_SRC(x)               ((x) << 25)
 106 #define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x)       ((x) << 12)
 107 #define DI_SW_GEN1_CNT_POL_CLR_SRC(x)           ((x) << 9)
 108 #define DI_SW_GEN1_CNT_DOWN(x)                  ((x) << 16)
 109 #define DI_SW_GEN1_CNT_UP(x)                    (x)
 110 #define DI_SW_GEN1_AUTO_RELOAD                  (0x10000000)
 111
 112 #define DI_DW_GEN_ACCESS_SIZE_OFFSET            24
 113 #define DI_DW_GEN_COMPONENT_SIZE_OFFSET         16
 114
 115 #define DI_GEN_POLARITY_1                       (1 << 0)
 116 #define DI_GEN_POLARITY_2                       (1 << 1)
 117 #define DI_GEN_POLARITY_3                       (1 << 2)
 118 #define DI_GEN_POLARITY_4                       (1 << 3)
 119 #define DI_GEN_POLARITY_5                       (1 << 4)
 120 #define DI_GEN_POLARITY_6                       (1 << 5)
 121 #define DI_GEN_POLARITY_7                       (1 << 6)
 122 #define DI_GEN_POLARITY_8                       (1 << 7)
 123 #define DI_GEN_POLARITY_DISP_CLK                (1 << 17)
 124 #define DI_GEN_DI_CLK_EXT                       (1 << 20)
 125 #define DI_GEN_DI_VSYNC_EXT                     (1 << 21)
 126
 127 #define DI_POL_DRDY_DATA_POLARITY               (1 << 7)
 128 #define DI_POL_DRDY_POLARITY_15                 (1 << 4)
 129
 130 #define DI_VSYNC_SEL_OFFSET                     13
 131
 132 static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
 133 {
 134         return readl(di->base + offset);
 135 }
 136
 137 static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
 138 {
 139         writel(value, di->base + offset);
 140 }
 141
 142 static void ipu_di_data_wave_config(struct ipu_di *di,
 143                                      int wave_gen,
 144                                      int access_size, int component_size)
 145 {
 146         u32 reg;
 147         reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
 148             (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
 149         ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
 150 }
 151
 152 static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
 153                 int set, int up, int down)
 154 {
 155         u32 reg;
 156
 157         reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
 158         reg &= ~(0x3 << (di_pin * 2));
 159         reg |= set << (di_pin * 2);
 160         ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
 161
 162         ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
 163 }
 164
 165 static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
 166                 int start, int count)
 167 {
 168         u32 reg;
 169         int i;
 170
 171         for (i = 0; i < count; i++) {
 172                 struct di_sync_config *c = &config[i];
 173                 int wave_gen = start + i + 1;
 174
 175                 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
 176                                 (c->repeat_count >= 0x1000) ||
 177                                 (c->cnt_up >= 0x400) ||
 178                                 (c->cnt_down >= 0x400)) {
 179                         dev_err(di->ipu->dev, "DI%d counters out of range.\n",
 180                                         di->id);
 181                         return;
 182                 }
 183
 184                 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
 185                         DI_SW_GEN0_RUN_SRC(c->run_src) |
 186                         DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
 187                         DI_SW_GEN0_OFFSET_SRC(c->offset_src);
 188                 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
 189
 190                 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
 191                         DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
 192                         DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
 193                                         c->cnt_polarity_trigger_src) |
 194                         DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
 195                         DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
 196                         DI_SW_GEN1_CNT_UP(c->cnt_up);
 197
 198                 /* Enable auto reload */
 199                 if (c->repeat_count == 0)
 200                         reg |= DI_SW_GEN1_AUTO_RELOAD;
 201
 202                 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
 203
 204                 reg = ipu_di_read(di, DI_STP_REP(wave_gen));
 205                 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
 206                 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
 207                 ipu_di_write(di, reg, DI_STP_REP(wave_gen));
 208         }
 209 }
 210
 211 static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 212                 struct ipu_di_signal_cfg *sig)
 213 {
 214         u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
 215                 sig->mode.hback_porch + sig->mode.hfront_porch;
 216         u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
 217                 sig->mode.vback_porch + sig->mode.vfront_porch;
 218         struct di_sync_config cfg[] = {
 219                 {
 220                         /* 1: internal VSYNC for each frame */
 221                         .run_count = v_total * 2 - 1,
 222                         .run_src = 3,                   /* == counter 7 */
 223                 }, {
 224                         /* PIN2: HSYNC waveform */
 225                         .run_count = h_total - 1,
 226                         .run_src = DI_SYNC_CLK,
 227                         .cnt_polarity_gen_en = 1,
 228                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
 229                         .cnt_down = sig->mode.hsync_len * 2,
 230                 }, {
 231                         /* PIN3: VSYNC waveform */
 232                         .run_count = v_total - 1,
 233                         .run_src = 4,                   /* == counter 7 */
 234                         .cnt_polarity_gen_en = 1,
 235                         .cnt_polarity_trigger_src = 4,  /* == counter 7 */
 236                         .cnt_down = sig->mode.vsync_len * 2,
 237                         .cnt_clr_src = DI_SYNC_CNT1,
 238                 }, {
 239                         /* 4: Field */
 240                         .run_count = v_total / 2,
 241                         .run_src = DI_SYNC_HSYNC,
 242                         .offset_count = h_total / 2,
 243                         .offset_src = DI_SYNC_CLK,
 244                         .repeat_count = 2,
 245                         .cnt_clr_src = DI_SYNC_CNT1,
 246                 }, {
 247                         /* 5: Active lines */
 248                         .run_src = DI_SYNC_HSYNC,
 249                         .offset_count = (sig->mode.vsync_len +
 250                                          sig->mode.vback_porch) / 2,
 251                         .offset_src = DI_SYNC_HSYNC,
 252                         .repeat_count = sig->mode.vactive / 2,
 253                         .cnt_clr_src = DI_SYNC_CNT4,
 254                 }, {
 255                         /* 6: Active pixel, referenced by DC */
 256                         .run_src = DI_SYNC_CLK,
 257                         .offset_count = sig->mode.hsync_len +
 258                                         sig->mode.hback_porch,
 259                         .offset_src = DI_SYNC_CLK,
 260                         .repeat_count = sig->mode.hactive,
 261                         .cnt_clr_src = DI_SYNC_CNT5,
 262                 }, {
 263                         /* 7: Half line HSYNC */
 264                         .run_count = h_total / 2 - 1,
 265                         .run_src = DI_SYNC_CLK,
 266                 }
 267         };
 268
 269         ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
 270
 271         ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
 272 }
 273
 274 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 275                 struct ipu_di_signal_cfg *sig, int div)
 276 {
 277         u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
 278                 sig->mode.hback_porch + sig->mode.hfront_porch;
 279         u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
 280                 sig->mode.vback_porch + sig->mode.vfront_porch;
 281         struct di_sync_config cfg[] = {
 282                 {
 283                         /* 1: INT_HSYNC */
 284                         .run_count = h_total - 1,
 285                         .run_src = DI_SYNC_CLK,
 286                 } , {
 287                         /* PIN2: HSYNC */
 288                         .run_count = h_total - 1,
 289                         .run_src = DI_SYNC_CLK,
 290                         .offset_count = div * sig->v_to_h_sync,
 291                         .offset_src = DI_SYNC_CLK,
 292                         .cnt_polarity_gen_en = 1,
 293                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
 294                         .cnt_down = sig->mode.hsync_len * 2,
 295                 } , {
 296                         /* PIN3: VSYNC */
 297                         .run_count = v_total - 1,
 298                         .run_src = DI_SYNC_INT_HSYNC,
 299                         .cnt_polarity_gen_en = 1,
 300                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 301                         .cnt_down = sig->mode.vsync_len * 2,
 302                 } , {
 303                         /* 4: Line Active */
 304                         .run_src = DI_SYNC_HSYNC,
 305                         .offset_count = sig->mode.vsync_len +
 306                                         sig->mode.vback_porch,
 307                         .offset_src = DI_SYNC_HSYNC,
 308                         .repeat_count = sig->mode.vactive,
 309                         .cnt_clr_src = DI_SYNC_VSYNC,
 310                 } , {
 311                         /* 5: Pixel Active, referenced by DC */
 312                         .run_src = DI_SYNC_CLK,
 313                         .offset_count = sig->mode.hsync_len +
 314                                         sig->mode.hback_porch,
 315                         .offset_src = DI_SYNC_CLK,
 316                         .repeat_count = sig->mode.hactive,
 317                         .cnt_clr_src = 5, /* Line Active */
 318                 } , {
 319                         /* unused */
 320                 } , {
 321                         /* unused */
 322                 } , {
 323                         /* unused */
 324                 } , {
 325                         /* unused */
 326                 },
 327         };
 328         /* can't use #7 and #8 for line active and pixel active counters */
 329         struct di_sync_config cfg_vga[] = {
 330                 {
 331                         /* 1: INT_HSYNC */
 332                         .run_count = h_total - 1,
 333                         .run_src = DI_SYNC_CLK,
 334                 } , {
 335                         /* 2: VSYNC */
 336                         .run_count = v_total - 1,
 337                         .run_src = DI_SYNC_INT_HSYNC,
 338                 } , {
 339                         /* 3: Line Active */
 340                         .run_src = DI_SYNC_INT_HSYNC,
 341                         .offset_count = sig->mode.vsync_len +
 342                                         sig->mode.vback_porch,
 343                         .offset_src = DI_SYNC_INT_HSYNC,
 344                         .repeat_count = sig->mode.vactive,
 345                         .cnt_clr_src = 3 /* VSYNC */,
 346                 } , {
 347                         /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
 348                         .run_count = h_total - 1,
 349                         .run_src = DI_SYNC_CLK,
 350                         .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
 351                         .offset_src = DI_SYNC_CLK,
 352                         .cnt_polarity_gen_en = 1,
 353                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
 354                         .cnt_down = sig->mode.hsync_len * 2,
 355                 } , {
 356                         /* 5: Pixel Active signal to DC */
 357                         .run_src = DI_SYNC_CLK,
 358                         .offset_count = sig->mode.hsync_len +
 359                                         sig->mode.hback_porch,
 360                         .offset_src = DI_SYNC_CLK,
 361                         .repeat_count = sig->mode.hactive,
 362                         .cnt_clr_src = 4, /* Line Active */
 363                 } , {
 364                         /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
 365                         .run_count = v_total - 1,
 366                         .run_src = DI_SYNC_INT_HSYNC,
 367                         .offset_count = 1, /* magic value from Freescale TVE driver */
 368                         .offset_src = DI_SYNC_INT_HSYNC,
 369                         .cnt_polarity_gen_en = 1,
 370                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 371                         .cnt_down = sig->mode.vsync_len * 2,
 372                 } , {
 373                         /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
 374                         .run_count = h_total - 1,
 375                         .run_src = DI_SYNC_CLK,
 376                         .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
 377                         .offset_src = DI_SYNC_CLK,
 378                         .cnt_polarity_gen_en = 1,
 379                         .cnt_polarity_trigger_src = DI_SYNC_CLK,
 380                         .cnt_down = sig->mode.hsync_len * 2,
 381                 } , {
 382                         /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
 383                         .run_count = v_total - 1,
 384                         .run_src = DI_SYNC_INT_HSYNC,
 385                         .offset_count = 1, /* magic value from Freescale TVE driver */
 386                         .offset_src = DI_SYNC_INT_HSYNC,
 387                         .cnt_polarity_gen_en = 1,
 388                         .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
 389                         .cnt_down = sig->mode.vsync_len * 2,
 390                 } , {
 391                         /* unused */
 392                 },
 393         };
 394
 395         ipu_di_write(di, v_total - 1, DI_SCR_CONF);
 396         if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
 397                 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
 398         else
 399                 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
 400 }
 401
 402 static void ipu_di_config_clock(struct ipu_di *di,
 403         const struct ipu_di_signal_cfg *sig)
 404 {
 405         struct clk *clk;
 406         unsigned clkgen0;
 407         uint32_t val;
 408
 409         if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
 410                 /*
 411                  * CLKMODE_EXT means we must use the DI clock: this is
 412                  * needed for things like LVDS which needs to feed the
 413                  * DI and LDB with the same pixel clock.
 414                  */
 415                 clk = di->clk_di;
 416
 417                 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
 418                         /*
 419                          * CLKMODE_SYNC means that we want the DI to be
 420                          * clocked at the same rate as the parent clock.
 421                          * This is needed (eg) for LDB which needs to be
 422                          * fed with the same pixel clock.  We assume that
 423                          * the LDB clock has already been set correctly.
 424                          */
 425                         clkgen0 = 1 << 4;
 426                 } else {
 427                         /*
 428                          * We can use the divider.  We should really have
 429                          * a flag here indicating whether the bridge can
 430                          * cope with a fractional divider or not.  For the
 431                          * time being, let's go for simplicitly and
 432                          * reliability.
 433                          */
 434                         unsigned long in_rate;
 435                         unsigned div;
 436
 437                         clk_set_rate(clk, sig->mode.pixelclock);
 438
 439                         in_rate = clk_get_rate(clk);
 440                         div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 441                         div = clamp(div, 1U, 255U);
 442
 443                         clkgen0 = div << 4;
 444                 }
 445         } else {
 446                 /*
 447                  * For other interfaces, we can arbitarily select between
 448                  * the DI specific clock and the internal IPU clock.  See
 449                  * DI_GENERAL bit 20.  We select the IPU clock if it can
 450                  * give us a clock rate within 1% of the requested frequency,
 451                  * otherwise we use the DI clock.
 452                  */
 453                 unsigned long rate, clkrate;
 454                 unsigned div, error;
 455
 456                 clkrate = clk_get_rate(di->clk_ipu);
 457                 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
 458                 div = clamp(div, 1U, 255U);
 459                 rate = clkrate / div;
 460
 461                 error = rate / (sig->mode.pixelclock / 1000);
 462
 463                 dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
 464                         rate, div, (signed)(error - 1000) / 10, error % 10);
 465
 466                 /* Allow a 1% error */
 467                 if (error < 1010 && error >= 990) {
 468                         clk = di->clk_ipu;
 469
 470                         clkgen0 = div << 4;
 471                 } else {
 472                         unsigned long in_rate;
 473                         unsigned div;
 474
 475                         clk = di->clk_di;
 476
 477                         clk_set_rate(clk, sig->mode.pixelclock);
 478
 479                         in_rate = clk_get_rate(clk);
 480                         div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 481                         div = clamp(div, 1U, 255U);
 482
 483                         clkgen0 = div << 4;
 484                 }
 485         }
 486
 487         di->clk_di_pixel = clk;
 488
 489         /* Set the divider */
 490         ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);
 491
 492         /*
 493          * Set the high/low periods.  Bits 24:16 give us the falling edge,
 494          * and bits 8:0 give the rising edge.  LSB is fraction, and is
 495          * based on the divider above.  We want a 50% duty cycle, so set
 496          * the falling edge to be half the divider.
 497          */
 498         ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);
 499
 500         /* Finally select the input clock */
 501         val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
 502         if (clk == di->clk_di)
 503                 val |= DI_GEN_DI_CLK_EXT;
 504         ipu_di_write(di, val, DI_GENERAL);
 505
 506         dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
 507                 sig->mode.pixelclock,
 508                 clk_get_rate(di->clk_ipu),
 509                 clk_get_rate(di->clk_di),
 510                 clk == di->clk_di ? "DI" : "IPU",
 511                 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
 512 }
 513
 514 /*
 515  * This function is called to adjust a video mode to IPU restrictions.
 516  * It is meant to be called from drm crtc mode_fixup() methods.
 517  */
 518 int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
 519 {
 520         u32 diff;
 521
 522         if (mode->vfront_porch >= 2)
 523                 return 0;
 524
 525         diff = 2 - mode->vfront_porch;
 526
 527         if (mode->vback_porch >= diff) {
 528                 mode->vfront_porch = 2;
 529                 mode->vback_porch -= diff;
 530         } else if (mode->vsync_len > diff) {
 531                 mode->vfront_porch = 2;
 532                 mode->vsync_len = mode->vsync_len - diff;
 533         } else {
 534                 dev_warn(di->ipu->dev, "failed to adjust videomode\n");
 535                 return -EINVAL;
 536         }
 537
 538         dev_warn(di->ipu->dev, "videomode adapted for IPU restrictions\n");
 539         return 0;
 540 }
 541 EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
 542
 543 static u32 ipu_di_gen_polarity(int pin)
 544 {
 545         switch (pin) {
 546         case 1:
 547                 return DI_GEN_POLARITY_1;
 548         case 2:
 549                 return DI_GEN_POLARITY_2;
 550         case 3:
 551                 return DI_GEN_POLARITY_3;
 552         case 4:
 553                 return DI_GEN_POLARITY_4;
 554         case 5:
 555                 return DI_GEN_POLARITY_5;
 556         case 6:
 557                 return DI_GEN_POLARITY_6;
 558         case 7:
 559                 return DI_GEN_POLARITY_7;
 560         case 8:
 561                 return DI_GEN_POLARITY_8;
 562         }
 563         return 0;
 564 }
 565
 566 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 567 {
 568         u32 reg;
 569         u32 di_gen, vsync_cnt;
 570         u32 div;
 571
 572         dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
 573                 di->id, sig->mode.hactive, sig->mode.vactive);
 574
 575         dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
 576                 clk_get_rate(di->clk_ipu),
 577                 clk_get_rate(di->clk_di),
 578                 sig->mode.pixelclock);
 579
 580         mutex_lock(&di_mutex);
 581
 582         ipu_di_config_clock(di, sig);
 583
 584         div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
 585         div = div / 16;         /* Now divider is integer portion */
 586
 587         /* Setup pixel clock timing */
 588         /* Down time is half of period */
 589         ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);
 590
 591         ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
 592         ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);
 593
 594         di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
 595         di_gen |= DI_GEN_DI_VSYNC_EXT;
 596
 597         if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
 598                 ipu_di_sync_config_interlaced(di, sig);
 599
 600                 /* set y_sel = 1 */
 601                 di_gen |= 0x10000000;
 602
 603                 vsync_cnt = 3;
 604         } else {
 605                 ipu_di_sync_config_noninterlaced(di, sig, div);
 606
 607                 vsync_cnt = 3;
 608                 if (di->id == 1)
 609                         /*
 610                          * TODO: change only for TVEv2, parallel display
 611                          * uses pin 2 / 3
 612                          */
 613                         if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
 614                                 vsync_cnt = 6;
 615         }
 616
 617         if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
 618                 di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
 619         if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
 620                 di_gen |= ipu_di_gen_polarity(sig->vsync_pin);
 621
 622         if (sig->clk_pol)
 623                 di_gen |= DI_GEN_POLARITY_DISP_CLK;
 624
 625         ipu_di_write(di, di_gen, DI_GENERAL);
 626
 627         ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
 628                      DI_SYNC_AS_GEN);
 629
 630         reg = ipu_di_read(di, DI_POL);
 631         reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
 632
 633         if (sig->enable_pol)
 634                 reg |= DI_POL_DRDY_POLARITY_15;
 635         if (sig->data_pol)
 636                 reg |= DI_POL_DRDY_DATA_POLARITY;
 637
 638         ipu_di_write(di, reg, DI_POL);
 639
 640         mutex_unlock(&di_mutex);
 641
 642         return 0;
 643 }
 644 EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);
 645
 646 int ipu_di_enable(struct ipu_di *di)
 647 {
 648         int ret;
 649
 650         WARN_ON(IS_ERR(di->clk_di_pixel));
 651
 652         ret = clk_prepare_enable(di->clk_di_pixel);
 653         if (ret)
 654                 return ret;
 655
 656         ipu_module_enable(di->ipu, di->module);
 657
 658         return 0;
 659 }
 660 EXPORT_SYMBOL_GPL(ipu_di_enable);
 661
 662 int ipu_di_disable(struct ipu_di *di)
 663 {
 664         WARN_ON(IS_ERR(di->clk_di_pixel));
 665
 666         ipu_module_disable(di->ipu, di->module);
 667
 668         clk_disable_unprepare(di->clk_di_pixel);
 669
 670         return 0;
 671 }
 672 EXPORT_SYMBOL_GPL(ipu_di_disable);
 673
 674 int ipu_di_get_num(struct ipu_di *di)
 675 {
 676         return di->id;
 677 }
 678 EXPORT_SYMBOL_GPL(ipu_di_get_num);
 679
 680 static DEFINE_MUTEX(ipu_di_lock);
 681
 682 struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
 683 {
 684         struct ipu_di *di;
 685
 686         if (disp > 1)
 687                 return ERR_PTR(-EINVAL);
 688
 689         di = ipu->di_priv[disp];
 690
 691         mutex_lock(&ipu_di_lock);
 692
 693         if (di->inuse) {
 694                 di = ERR_PTR(-EBUSY);
 695                 goto out;
 696         }
 697
 698         di->inuse = true;
 699 out:
 700         mutex_unlock(&ipu_di_lock);
 701
 702         return di;
 703 }
 704 EXPORT_SYMBOL_GPL(ipu_di_get);
 705
 706 void ipu_di_put(struct ipu_di *di)
 707 {
 708         mutex_lock(&ipu_di_lock);
 709
 710         di->inuse = false;
 711
 712         mutex_unlock(&ipu_di_lock);
 713 }
 714 EXPORT_SYMBOL_GPL(ipu_di_put);
 715
 716 int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
 717                 unsigned long base,
 718                 u32 module, struct clk *clk_ipu)
 719 {
 720         struct ipu_di *di;
 721
 722         if (id > 1)
 723                 return -ENODEV;
 724
 725         di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
 726         if (!di)
 727                 return -ENOMEM;
 728
 729         ipu->di_priv[id] = di;
 730
 731         di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
 732         if (IS_ERR(di->clk_di))
 733                 return PTR_ERR(di->clk_di);
 734
 735         di->module = module;
 736         di->id = id;
 737         di->clk_ipu = clk_ipu;
 738         di->base = devm_ioremap(dev, base, PAGE_SIZE);
 739         if (!di->base)
 740                 return -ENOMEM;
 741
 742         ipu_di_write(di, 0x10, DI_BS_CLKGEN0);
 743
 744         dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
 745                         id, base, di->base);
 746         di->inuse = false;
 747         di->ipu = ipu;
 748
 749         return 0;
 750 }
 751
 752 void ipu_di_exit(struct ipu_soc *ipu, int id)
 753 {
 754 }