drivers/hid/Kconfig

   1 #
   2 # HID driver configuration
   3 #
   4 menuconfig HID_SUPPORT
   5         bool "HID Devices"
   6         depends on INPUT
   7         default y
   8         ---help---
   9           Say Y here to get to see options for various computer-human interface
  10           device drivers. This option alone does not add any kernel code.
  11
  12           If you say N, all options in this submenu will be skipped and disabled.
  13
  14 if HID_SUPPORT
  15
  16 config HID
  17         tristate "Generic HID support"
  18         depends on INPUT
  19         default y
  20         ---help---
  21           A human interface device (HID) is a type of computer device that
  22           interacts directly with and takes input from humans. The term "HID"
  23           most commonly used to refer to the USB-HID specification, but other
  24           devices (such as, but not strictly limited to, Bluetooth) are
  25           designed using HID specification (this involves certain keyboards,
  26           mice, tablets, etc). This option compiles into kernel the generic
  27           HID layer code (parser, usages, etc.), which can then be used by
  28           transport-specific HID implementation (like USB or Bluetooth).
  29
  30           For docs and specs, see http://www.usb.org/developers/hidpage/
  31
  32           If unsure, say Y.
  33
  34 config HID_DEBUG
  35         bool "HID debugging support"
  36         default y
  37         depends on HID
  38         ---help---
  39         This option lets the HID layer output diagnostics about its internal
  40         state, resolve HID usages, dump HID fields, etc. Individual HID drivers
  41         use this debugging facility to output information about individual HID
  42         devices, etc.
  43
  44         This feature is useful for those who are either debugging the HID parser
  45         or any HID hardware device.
  46
  47         If unsure, say Y.
  48
  49 config HIDRAW
  50         bool "/dev/hidraw raw HID device support"
  51         depends on HID
  52         ---help---
  53         Say Y here if you want to support HID devices (from the USB
  54         specification standpoint) that aren't strictly user interface
  55         devices, like monitor controls and Uninterruptable Power Supplies.
  56
  57         This module supports these devices separately using a separate
  58         event interface on /dev/hidraw.
  59
  60         There is also a /dev/hiddev configuration option in the USB HID
  61         configuration menu. In comparison to hiddev, this device does not process
  62         the hid events at all (no parsing, no lookups). This lets applications
  63         to work on raw hid events when they want to, and avoid using transport-specific
  64         userspace libhid/libusb libraries.
  65
  66         If unsure, say Y.
  67
  68 source "drivers/hid/usbhid/Kconfig"
  69
  70 menu "Special HID drivers"
  71         depends on HID
  72
  73 config HID_A4TECH
  74         tristate "A4 tech" if EMBEDDED
  75         depends on USB_HID
  76         default !EMBEDDED
  77         ---help---
  78         Support for A4 tech X5 and WOP-35 / Trust 450L mice.
  79
  80 config HID_APPLE
  81         tristate "Apple" if EMBEDDED
  82         depends on (USB_HID || BT_HIDP)
  83         default !EMBEDDED
  84         ---help---
  85         Support for some Apple devices which less or more break
  86         HID specification.
  87
  88         Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
  89         MacBooks, MacBook Pros and Apple Aluminum.
  90
  91 config HID_BELKIN
  92         tristate "Belkin" if EMBEDDED
  93         depends on USB_HID
  94         default !EMBEDDED
  95         ---help---
  96         Support for Belkin Flip KVM and Wireless keyboard.
  97
  98 config HID_CHERRY
  99         tristate "Cherry" if EMBEDDED
 100         depends on USB_HID
 101         default !EMBEDDED
 102         ---help---
 103         Support for Cherry Cymotion keyboard.
 104
 105 config HID_CHICONY
 106         tristate "Chicony" if EMBEDDED
 107         depends on USB_HID
 108         default !EMBEDDED
 109         ---help---
 110         Support for Chicony Tactical pad.
 111
 112 config HID_CYPRESS
 113         tristate "Cypress" if EMBEDDED
 114         depends on USB_HID
 115         default !EMBEDDED
 116         ---help---
 117         Support for cypress mouse and barcode readers.
 118
 119 config DRAGONRISE_FF
 120         tristate "DragonRise Inc. force feedback support"
 121         depends on USB_HID
 122         select INPUT_FF_MEMLESS
 123         ---help---
 124         Say Y here if you want to enable force feedback support for DragonRise Inc.
 125         game controllers.
 126
 127 config HID_EZKEY
 128         tristate "Ezkey" if EMBEDDED
 129         depends on USB_HID
 130         default !EMBEDDED
 131         ---help---
 132         Support for Ezkey BTC 8193 keyboard.
 133
 134 config HID_KYE
 135         tristate "Kye" if EMBEDDED
 136         depends on USB_HID
 137         default !EMBEDDED
 138         ---help---
 139         Support for Kye/Genius Ergo Mouse.
 140
 141 config HID_GYRATION
 142         tristate "Gyration" if EMBEDDED
 143         depends on USB_HID
 144         default !EMBEDDED
 145         ---help---
 146         Support for Gyration remote control.
 147
 148 config HID_KENSINGTON
 149         tristate "Kensington" if EMBEDDED
 150         depends on USB_HID
 151         default !EMBEDDED
 152         ---help---
 153         Support for Kensington Slimblade Trackball.
 154
 155 config HID_LOGITECH
 156         tristate "Logitech" if EMBEDDED
 157         depends on USB_HID
 158         default !EMBEDDED
 159         ---help---
 160         Support for Logitech devices that are not fully compliant with HID standard.
 161
 162 config LOGITECH_FF
 163         bool "Logitech force feedback"
 164         depends on HID_LOGITECH
 165         select INPUT_FF_MEMLESS
 166         help
 167           Say Y here if you have one of these devices:
 168           - Logitech WingMan Cordless RumblePad
 169           - Logitech WingMan Cordless RumblePad 2
 170           - Logitech WingMan Force 3D
 171           - Logitech Formula Force EX
 172           - Logitech MOMO Force wheel
 173
 174           and if you want to enable force feedback for them.
 175           Note: if you say N here, this device will still be supported, but without
 176           force feedback.
 177
 178 config LOGIRUMBLEPAD2_FF
 179         bool "Logitech Rumblepad 2 force feedback"
 180         depends on HID_LOGITECH
 181         select INPUT_FF_MEMLESS
 182         help
 183           Say Y here if you want to enable force feedback support for Logitech
 184           Rumblepad 2 devices.
 185
 186 config HID_MICROSOFT
 187         tristate "Microsoft" if EMBEDDED
 188         depends on USB_HID
 189         default !EMBEDDED
 190         ---help---
 191         Support for Microsoft devices that are not fully compliant with HID standard.
 192
 193 config HID_MONTEREY
 194         tristate "Monterey" if EMBEDDED
 195         depends on USB_HID
 196         default !EMBEDDED
 197         ---help---
 198         Support for Monterey Genius KB29E.
 199
 200 config HID_NTRIG
 201         tristate "NTrig" if EMBEDDED
 202         depends on USB_HID
 203         default !EMBEDDED
 204         ---help---
 205         Support for N-Trig touch screen.
 206
 207 config HID_PANTHERLORD
 208         tristate "Pantherlord devices support" if EMBEDDED
 209         depends on USB_HID
 210         default !EMBEDDED
 211         ---help---
 212         Support for PantherLord/GreenAsia based device support.
 213
 214 config PANTHERLORD_FF
 215         bool "Pantherlord force feedback support"
 216         depends on HID_PANTHERLORD
 217         select INPUT_FF_MEMLESS
 218         help
 219           Say Y here if you have a PantherLord/GreenAsia based game controller
 220           or adapter and want to enable force feedback support for it.
 221
 222 config HID_PETALYNX
 223         tristate "Petalynx" if EMBEDDED
 224         depends on USB_HID
 225         default !EMBEDDED
 226         ---help---
 227         Support for Petalynx Maxter remote control.
 228
 229 config HID_SAMSUNG
 230         tristate "Samsung" if EMBEDDED
 231         depends on USB_HID
 232         default !EMBEDDED
 233         ---help---
 234         Support for Samsung InfraRed remote control.
 235
 236 config HID_SONY
 237         tristate "Sony" if EMBEDDED
 238         depends on USB_HID
 239         default !EMBEDDED
 240         ---help---
 241         Support for Sony PS3 controller.
 242
 243 config HID_SUNPLUS
 244         tristate "Sunplus" if EMBEDDED
 245         depends on USB_HID
 246         default !EMBEDDED
 247         ---help---
 248         Support for Sunplus wireless desktop.
 249
 250 config GREENASIA_FF
 251         tristate "GreenAsia (Product ID 0x12) force feedback support"
 252         depends on USB_HID
 253         select INPUT_FF_MEMLESS
 254         ---help---
 255         Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 256         (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter
 257         and want to enable force feedback support for it.
 258
 259 config HID_TOPSEED
 260         tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 261         depends on USB_HID
 262         default !EMBEDDED
 263         ---help---
 264         Say Y if you have a TopSeed Cyberlink remote control.
 265
 266 config THRUSTMASTER_FF
 267         tristate "ThrustMaster devices support"
 268         depends on USB_HID
 269         select INPUT_FF_MEMLESS
 270         help
 271           Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
 272           a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
 273
 274 config ZEROPLUS_FF
 275         tristate "Zeroplus based game controller support"
 276         depends on USB_HID
 277         select INPUT_FF_MEMLESS
 278         help
 279           Say Y here if you have a Zeroplus based game controller.
 280
 281 endmenu
 282
 283 endif # HID_SUPPORT