drivers/hid/Kconfig

   1 #
   2 # HID driver configuration
   3 #
   4 menuconfig HID_SUPPORT
   5         bool "HID Devices"
   6         depends on INPUT
   7         default y
   8         ---help---
   9           Say Y here to get to see options for various computer-human interface
  10           device drivers. This option alone does not add any kernel code.
  11
  12           If you say N, all options in this submenu will be skipped and disabled.
  13
  14 if HID_SUPPORT
  15
  16 config HID
  17         tristate "Generic HID support"
  18         depends on INPUT
  19         default y
  20         ---help---
  21           A human interface device (HID) is a type of computer device that
  22           interacts directly with and takes input from humans. The term "HID"
  23           most commonly used to refer to the USB-HID specification, but other
  24           devices (such as, but not strictly limited to, Bluetooth) are
  25           designed using HID specification (this involves certain keyboards,
  26           mice, tablets, etc). This option compiles into kernel the generic
  27           HID layer code (parser, usages, etc.), which can then be used by
  28           transport-specific HID implementation (like USB or Bluetooth).
  29
  30           For docs and specs, see http://www.usb.org/developers/hidpage/
  31
  32           If unsure, say Y
  33
  34 config HID_DEBUG
  35         bool "HID debugging support"
  36         default y if !EMBEDDED
  37         depends on HID
  38         ---help---
  39         This option lets the HID layer output diagnostics about its internal
  40         state, resolve HID usages, dump HID fields, etc. Individual HID drivers
  41         use this debugging facility to output information about individual HID
  42         devices, etc.
  43
  44         This feature is useful for those who are either debugging the HID parser
  45         or any HID hardware device.
  46
  47         If unsure, say N
  48
  49 config HIDRAW
  50         bool "/dev/hidraw raw HID device support"
  51         depends on HID
  52         ---help---
  53         Say Y here if you want to support HID devices (from the USB
  54         specification standpoint) that aren't strictly user interface
  55         devices, like monitor controls and Uninterruptable Power Supplies.
  56
  57         This module supports these devices separately using a separate
  58         event interface on /dev/hidraw.
  59
  60         There is also a /dev/hiddev configuration option in the USB HID
  61         configuration menu. In comparison to hiddev, this device does not process
  62         the hid events at all (no parsing, no lookups). This lets applications
  63         to work on raw hid events when they want to, and avoid using transport-specific
  64         userspace libhid/libusb libraries.
  65
  66         If unsure, say Y.
  67
  68 source "drivers/hid/usbhid/Kconfig"
  69
  70 menu "Special HID drivers"
  71         depends on HID
  72
  73 config HID_COMPAT
  74         bool "Load all HID drivers on hid core load"
  75         default y
  76         ---help---
  77         Compatible option for older userspace. If you have system without udev
  78         support of module loading through aliases and also old
  79         module-init-tools which can't handle hid bus, choose Y here. Otherwise
  80         say N. If you say N and your userspace is old enough, the only
  81         functionality you lose is modules autoloading.
  82
  83         If unsure, say Y.
  84
  85 config HID_A4TECH
  86         tristate "A4 tech" if EMBEDDED
  87         depends on USB_HID
  88         default !EMBEDDED
  89         ---help---
  90         Support for A4 tech X5 and WOP-35 / Trust 450L mice.
  91
  92 config HID_APPLE
  93         tristate "Apple" if EMBEDDED
  94         depends on (USB_HID || BT_HIDP)
  95         default !EMBEDDED
  96         ---help---
  97         Support for some Apple devices which less or more break
  98         HID specification.
  99
 100         Say Y here if you want support for keyboards of Apple iBooks, PowerBooks,
 101         MacBooks, MacBook Pros and Apple Aluminum.
 102
 103 config HID_BELKIN
 104         tristate "Belkin" if EMBEDDED
 105         depends on USB_HID
 106         default !EMBEDDED
 107         ---help---
 108         Support for Belkin Flip KVM and Wireless keyboard.
 109
 110 config HID_CHERRY
 111         tristate "Cherry" if EMBEDDED
 112         depends on USB_HID
 113         default !EMBEDDED
 114         ---help---
 115         Support for Cherry Cymotion keyboard.
 116
 117 config HID_CHICONY
 118         tristate "Chicony" if EMBEDDED
 119         depends on USB_HID
 120         default !EMBEDDED
 121         ---help---
 122         Support for Chicony Tactical pad.
 123
 124 config HID_CYPRESS
 125         tristate "Cypress" if EMBEDDED
 126         depends on USB_HID
 127         default !EMBEDDED
 128         ---help---
 129         Support for cypress mouse and barcode readers.
 130
 131 config HID_EZKEY
 132         tristate "Ezkey" if EMBEDDED
 133         depends on USB_HID
 134         default !EMBEDDED
 135         ---help---
 136         Support for Ezkey BTC 8193 keyboard.
 137
 138 config HID_GYRATION
 139         tristate "Gyration" if EMBEDDED
 140         depends on USB_HID
 141         default !EMBEDDED
 142         ---help---
 143         Support for Gyration remote control.
 144
 145 config HID_LOGITECH
 146         tristate "Logitech" if EMBEDDED
 147         depends on USB_HID
 148         default !EMBEDDED
 149         ---help---
 150         Support for Logitech devices that are not fully compliant with HID standard.
 151
 152 config LOGITECH_FF
 153         bool "Logitech force feedback"
 154         depends on HID_LOGITECH
 155         select INPUT_FF_MEMLESS
 156         help
 157           Say Y here if you have one of these devices:
 158           - Logitech WingMan Cordless RumblePad
 159           - Logitech WingMan Cordless RumblePad 2
 160           - Logitech WingMan Force 3D
 161           - Logitech Formula Force EX
 162           - Logitech MOMO Force wheel
 163
 164           and if you want to enable force feedback for them.
 165           Note: if you say N here, this device will still be supported, but without
 166           force feedback.
 167
 168 config LOGIRUMBLEPAD2_FF
 169         bool "Logitech Rumblepad 2 force feedback"
 170         depends on HID_LOGITECH
 171         select INPUT_FF_MEMLESS
 172         help
 173           Say Y here if you want to enable force feedback support for Logitech
 174           Rumblepad 2 devices.
 175
 176 config HID_MICROSOFT
 177         tristate "Microsoft" if EMBEDDED
 178         depends on USB_HID
 179         default !EMBEDDED
 180         ---help---
 181         Support for Microsoft devices that are not fully compliant with HID standard.
 182
 183 config HID_MONTEREY
 184         tristate "Monterey" if EMBEDDED
 185         depends on USB_HID
 186         default !EMBEDDED
 187         ---help---
 188         Support for Monterey Genius KB29E.
 189
 190 config HID_NTRIG
 191         tristate "NTrig" if EMBEDDED
 192         depends on USB_HID
 193         default !EMBEDDED
 194         ---help---
 195         Support for N-Trig touch screen.
 196
 197 config HID_PANTHERLORD
 198         tristate "Pantherlord devices support" if EMBEDDED
 199         depends on USB_HID
 200         default !EMBEDDED
 201         ---help---
 202         Support for PantherLord/GreenAsia based device support.
 203
 204 config PANTHERLORD_FF
 205         bool "Pantherlord force feedback support"
 206         depends on HID_PANTHERLORD
 207         select INPUT_FF_MEMLESS
 208         help
 209           Say Y here if you have a PantherLord/GreenAsia based game controller
 210           or adapter and want to enable force feedback support for it.
 211
 212 config HID_PETALYNX
 213         tristate "Petalynx" if EMBEDDED
 214         depends on USB_HID
 215         default !EMBEDDED
 216         ---help---
 217         Support for Petalynx Maxter remote control.
 218
 219 config HID_SAMSUNG
 220         tristate "Samsung" if EMBEDDED
 221         depends on USB_HID
 222         default !EMBEDDED
 223         ---help---
 224         Support for Samsung InfraRed remote control.
 225
 226 config HID_SONY
 227         tristate "Sony" if EMBEDDED
 228         depends on USB_HID
 229         default !EMBEDDED
 230         ---help---
 231         Support for Sony PS3 controller.
 232
 233 config HID_SUNPLUS
 234         tristate "Sunplus" if EMBEDDED
 235         depends on USB_HID
 236         default !EMBEDDED
 237         ---help---
 238         Support for Sunplus wireless desktop.
 239
 240 config GREENASIA_FF
 241         tristate "GreenAsia (Product ID 0x12) force feedback support"
 242         depends on USB_HID
 243         select INPUT_FF_MEMLESS
 244         ---help---
 245         Say Y here if you have a GreenAsia (Product ID 0x12) based game controller
 246         (like MANTA Warior MM816 and SpeedLink Strike2 SL-6635) or adapter
 247         and want to enable force feedback support for it.
 248
 249 config HID_TOPSEED
 250         tristate "TopSeed Cyberlink remote control support" if EMBEDDED
 251         depends on USB_HID
 252         default !EMBEDDED
 253         ---help---
 254         Say Y if you have a TopSeed Cyberlink remote control.
 255
 256 config THRUSTMASTER_FF
 257         tristate "ThrustMaster devices support"
 258         depends on USB_HID
 259         select INPUT_FF_MEMLESS
 260         help
 261           Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or
 262           a THRUSTMASTER Ferrari GT Rumble Force or Force Feedback Wheel.
 263
 264 config ZEROPLUS_FF
 265         tristate "Zeroplus based game controller support"
 266         depends on USB_HID
 267         select INPUT_FF_MEMLESS
 268         help
 269           Say Y here if you have a Zeroplus based game controller.
 270
 271 endmenu
 272
 273 endif # HID_SUPPORT