drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config SENSORS_ABITUGURU
  32         tristate "Abit uGuru (rev 1 & 2)"
  33         depends on X86 && EXPERIMENTAL
  34         help
  35           If you say yes here you get support for the sensor part of the first
  36           and second revision of the Abit uGuru chip. The voltage and frequency
  37           control parts of the Abit uGuru are not supported. The Abit uGuru
  38           chip can be found on Abit uGuru featuring motherboards (most modern
  39           Abit motherboards from before end 2005). For more info and a list
  40           of which motherboards have which revision see
  41           Documentation/hwmon/abituguru
  42
  43           This driver can also be built as a module.  If so, the module
  44           will be called abituguru.
  45
  46 config SENSORS_ABITUGURU3
  47         tristate "Abit uGuru (rev 3)"
  48         depends on X86 && EXPERIMENTAL
  49         help
  50           If you say yes here you get support for the sensor part of the
  51           third revision of the Abit uGuru chip. Only reading the sensors
  52           and their settings is supported. The third revision of the Abit
  53           uGuru chip can be found on recent Abit motherboards (since end
  54           2005). For more info and a list of which motherboards have which
  55           revision see Documentation/hwmon/abituguru3
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called abituguru3.
  59
  60 config SENSORS_AD7418
  61         tristate "Analog Devices AD7416, AD7417 and AD7418"
  62         depends on I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for the Analog Devices
  65           AD7416, AD7417 and AD7418 temperature monitoring chips.
  66
  67           This driver can also be built as a module. If so, the module
  68           will be called ad7418.
  69
  70 config SENSORS_ADM1021
  71         tristate "Analog Devices ADM1021 and compatibles"
  72         depends on I2C
  73         help
  74           If you say yes here you get support for Analog Devices ADM1021
  75           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  76           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  77           and the XEON processor built-in sensor.
  78
  79           This driver can also be built as a module.  If so, the module
  80           will be called adm1021.
  81
  82 config SENSORS_ADM1025
  83         tristate "Analog Devices ADM1025 and compatibles"
  84         depends on I2C
  85         select HWMON_VID
  86         help
  87           If you say yes here you get support for Analog Devices ADM1025
  88           and Philips NE1619 sensor chips.
  89
  90           This driver can also be built as a module.  If so, the module
  91           will be called adm1025.
  92
  93 config SENSORS_ADM1026
  94         tristate "Analog Devices ADM1026 and compatibles"
  95         depends on I2C && EXPERIMENTAL
  96         select HWMON_VID
  97         help
  98           If you say yes here you get support for Analog Devices ADM1026
  99           sensor chip.
 100
 101           This driver can also be built as a module.  If so, the module
 102           will be called adm1026.
 103
 104 config SENSORS_ADM1029
 105         tristate "Analog Devices ADM1029"
 106         depends on I2C && EXPERIMENTAL
 107         help
 108           If you say yes here you get support for Analog Devices ADM1029
 109           sensor chip.
 110           Very rare chip, please let us know you use it.
 111
 112           This driver can also be built as a module.  If so, the module
 113           will be called adm1029.
 114
 115 config SENSORS_ADM1031
 116         tristate "Analog Devices ADM1031 and compatibles"
 117         depends on I2C && EXPERIMENTAL
 118         help
 119           If you say yes here you get support for Analog Devices ADM1031
 120           and ADM1030 sensor chips.
 121
 122           This driver can also be built as a module.  If so, the module
 123           will be called adm1031.
 124
 125 config SENSORS_ADM9240
 126         tristate "Analog Devices ADM9240 and compatibles"
 127         depends on I2C && EXPERIMENTAL
 128         select HWMON_VID
 129         help
 130           If you say yes here you get support for Analog Devices ADM9240,
 131           Dallas DS1780, National Semiconductor LM81 sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called adm9240.
 135
 136 config SENSORS_ADT7470
 137         tristate "Analog Devices ADT7470"
 138         depends on I2C && EXPERIMENTAL
 139         help
 140           If you say yes here you get support for the Analog Devices
 141           ADT7470 temperature monitoring chips.
 142
 143           This driver can also be built as a module. If so, the module
 144           will be called adt7470.
 145
 146 config SENSORS_ADT7473
 147         tristate "Analog Devices ADT7473"
 148         depends on I2C && EXPERIMENTAL
 149         help
 150           If you say yes here you get support for the Analog Devices
 151           ADT7473 temperature monitoring chips.
 152
 153           This driver can also be built as a module. If so, the module
 154           will be called adt7473.
 155
 156 config SENSORS_K8TEMP
 157         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 158         depends on X86 && PCI && EXPERIMENTAL
 159         help
 160           If you say yes here you get support for the temperature
 161           sensor(s) inside your CPU. Supported is whole AMD K8
 162           microarchitecture. Please note that you will need at least
 163           lm-sensors 2.10.1 for proper userspace support.
 164
 165           This driver can also be built as a module.  If so, the module
 166           will be called k8temp.
 167
 168 config SENSORS_AMS
 169         tristate "Apple Motion Sensor driver"
 170         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 171         select INPUT_POLLDEV
 172         help
 173           Support for the motion sensor included in PowerBooks. Includes
 174           implementations for PMU and I2C.
 175
 176           This driver can also be built as a module. If so, the module
 177           will be called ams.
 178
 179 config SENSORS_AMS_PMU
 180         bool "PMU variant"
 181         depends on SENSORS_AMS && ADB_PMU
 182         default y
 183         help
 184           PMU variant of motion sensor, found in late 2005 PowerBooks.
 185
 186 config SENSORS_AMS_I2C
 187         bool "I2C variant"
 188         depends on SENSORS_AMS && I2C
 189         default y
 190         help
 191           I2C variant of motion sensor, found in early 2005 PowerBooks and
 192           iBooks.
 193
 194 config SENSORS_ASB100
 195         tristate "Asus ASB100 Bach"
 196         depends on X86 && I2C && EXPERIMENTAL
 197         select HWMON_VID
 198         help
 199           If you say yes here you get support for the ASB100 Bach sensor
 200           chip found on some Asus mainboards.
 201
 202           This driver can also be built as a module.  If so, the module
 203           will be called asb100.
 204
 205 config SENSORS_ATXP1
 206         tristate "Attansic ATXP1 VID controller"
 207         depends on I2C && EXPERIMENTAL
 208         select HWMON_VID
 209         help
 210           If you say yes here you get support for the Attansic ATXP1 VID
 211           controller.
 212
 213           If your board have such a chip, you are able to control your CPU
 214           core and other voltages.
 215
 216           This driver can also be built as a module.  If so, the module
 217           will be called atxp1.
 218
 219 config SENSORS_DS1621
 220         tristate "Dallas Semiconductor DS1621 and DS1625"
 221         depends on I2C
 222         help
 223           If you say yes here you get support for Dallas Semiconductor
 224           DS1621 and DS1625 sensor chips.
 225
 226           This driver can also be built as a module.  If so, the module
 227           will be called ds1621.
 228
 229 config SENSORS_I5K_AMB
 230         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 231         depends on PCI && EXPERIMENTAL
 232         help
 233           If you say yes here you get support for FB-DIMM AMB temperature
 234           monitoring chips on systems with the Intel 5000 series chipset.
 235
 236           This driver can also be built as a module. If so, the module
 237           will be called i5k_amb.
 238
 239 config SENSORS_F71805F
 240         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 241         depends on EXPERIMENTAL
 242         help
 243           If you say yes here you get support for hardware monitoring
 244           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 245           Super-I/O chips.
 246
 247           This driver can also be built as a module.  If so, the module
 248           will be called f71805f.
 249
 250 config SENSORS_F71882FG
 251         tristate "Fintek F71882FG and F71883FG"
 252         depends on EXPERIMENTAL
 253         help
 254           If you say yes here you get support for hardware monitoring
 255           features of the Fintek F71882FG and F71883FG Super-I/O chips.
 256
 257           This driver can also be built as a module.  If so, the module
 258           will be called f71882fg.
 259
 260 config SENSORS_F75375S
 261         tristate "Fintek F75375S/SP and F75373";
 262         depends on I2C && EXPERIMENTAL
 263         help
 264           If you say yes here you get support for hardware monitoring
 265           features of the Fintek F75375S/SP and F75373
 266
 267           This driver can also be built as a module.  If so, the module
 268           will be called f75375s.
 269
 270 config SENSORS_FSCHER
 271         tristate "FSC Hermes"
 272         depends on X86 && I2C
 273         help
 274           If you say yes here you get support for Fujitsu Siemens
 275           Computers Hermes sensor chips.
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called fscher.
 279
 280 config SENSORS_FSCPOS
 281         tristate "FSC Poseidon"
 282         depends on X86 && I2C
 283         help
 284           If you say yes here you get support for Fujitsu Siemens
 285           Computers Poseidon sensor chips.
 286
 287           This driver can also be built as a module.  If so, the module
 288           will be called fscpos.
 289
 290 config SENSORS_FSCHMD
 291         tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
 292         depends on X86 && I2C && EXPERIMENTAL
 293         help
 294           If you say yes here you get support for various Fujitsu Siemens
 295           Computers sensor chips.
 296
 297           This is a new merged driver for FSC sensor chips which is intended
 298           as a replacment for the fscpos, fscscy and fscher drivers and adds
 299           support for several other FCS sensor chips.
 300
 301           This driver can also be built as a module.  If so, the module
 302           will be called fschmd.
 303
 304 config SENSORS_GL518SM
 305         tristate "Genesys Logic GL518SM"
 306         depends on I2C
 307         help
 308           If you say yes here you get support for Genesys Logic GL518SM
 309           sensor chips.
 310
 311           This driver can also be built as a module.  If so, the module
 312           will be called gl518sm.
 313
 314 config SENSORS_GL520SM
 315         tristate "Genesys Logic GL520SM"
 316         depends on I2C
 317         select HWMON_VID
 318         help
 319           If you say yes here you get support for Genesys Logic GL520SM
 320           sensor chips.
 321
 322           This driver can also be built as a module.  If so, the module
 323           will be called gl520sm.
 324
 325 config SENSORS_CORETEMP
 326         tristate "Intel Core (2) Duo/Solo temperature sensor"
 327         depends on X86 && EXPERIMENTAL
 328         help
 329           If you say yes here you get support for the temperature
 330           sensor inside your CPU. Supported all are all known variants
 331           of Intel Core family.
 332
 333 config SENSORS_IBMAEM
 334         tristate "IBM Active Energy Manager temperature/power sensors and control"
 335         select IPMI_SI
 336         depends on IPMI_HANDLER
 337         help
 338           If you say yes here you get support for the temperature and
 339           power sensors and capping hardware in various IBM System X
 340           servers that support Active Energy Manager.  This includes
 341           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 342           and certain HS2x/LS2x/QS2x blades.
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called ibmaem.
 346
 347 config SENSORS_IBMPEX
 348         tristate "IBM PowerExecutive temperature/power sensors"
 349         select IPMI_SI
 350         depends on IPMI_HANDLER
 351         help
 352           If you say yes here you get support for the temperature and
 353           power sensors in various IBM System X servers that support
 354           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 355           x3655, and x3755; the x3800, x3850, and x3950 models that have
 356           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 357
 358           This driver can also be built as a module.  If so, the module
 359           will be called ibmpex.
 360
 361 config SENSORS_IT87
 362         tristate "ITE IT87xx and compatibles"
 363         select HWMON_VID
 364         help
 365           If you say yes here you get support for ITE IT8705F, IT8712F,
 366           IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
 367
 368           This driver can also be built as a module.  If so, the module
 369           will be called it87.
 370
 371 config SENSORS_LM63
 372         tristate "National Semiconductor LM63"
 373         depends on I2C
 374         help
 375           If you say yes here you get support for the National Semiconductor
 376           LM63 remote diode digital temperature sensor with integrated fan
 377           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 378           motherboard, among others.
 379
 380           This driver can also be built as a module.  If so, the module
 381           will be called lm63.
 382
 383 config SENSORS_LM70
 384         tristate "National Semiconductor LM70"
 385         depends on SPI_MASTER && EXPERIMENTAL
 386         help
 387           If you say yes here you get support for the National Semiconductor
 388           LM70 digital temperature sensor chip.
 389
 390           This driver can also be built as a module.  If so, the module
 391           will be called lm70.
 392
 393 config SENSORS_LM75
 394         tristate "National Semiconductor LM75 and compatibles"
 395         depends on I2C
 396         help
 397           If you say yes here you get support for National Semiconductor LM75
 398           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 399           9-bit precision mode), and TelCom (now Microchip) TCN75.
 400
 401           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 402           a force module parameter. The driver will not handle the extra
 403           precision anyhow.
 404
 405           This driver can also be built as a module.  If so, the module
 406           will be called lm75.
 407
 408 config SENSORS_LM77
 409         tristate "National Semiconductor LM77"
 410         depends on I2C
 411         help
 412           If you say yes here you get support for National Semiconductor LM77
 413           sensor chips.
 414
 415           This driver can also be built as a module.  If so, the module
 416           will be called lm77.
 417
 418 config SENSORS_LM78
 419         tristate "National Semiconductor LM78 and compatibles"
 420         depends on I2C
 421         select HWMON_VID
 422         help
 423           If you say yes here you get support for National Semiconductor LM78,
 424           LM78-J and LM79.
 425
 426           This driver can also be built as a module.  If so, the module
 427           will be called lm78.
 428
 429 config SENSORS_LM80
 430         tristate "National Semiconductor LM80"
 431         depends on I2C && EXPERIMENTAL
 432         help
 433           If you say yes here you get support for National Semiconductor
 434           LM80 sensor chips.
 435
 436           This driver can also be built as a module.  If so, the module
 437           will be called lm80.
 438
 439 config SENSORS_LM83
 440         tristate "National Semiconductor LM83 and compatibles"
 441         depends on I2C
 442         help
 443           If you say yes here you get support for National Semiconductor
 444           LM82 and LM83 sensor chips.
 445
 446           This driver can also be built as a module.  If so, the module
 447           will be called lm83.
 448
 449 config SENSORS_LM85
 450         tristate "National Semiconductor LM85 and compatibles"
 451         depends on I2C && EXPERIMENTAL
 452         select HWMON_VID
 453         help
 454           If you say yes here you get support for National Semiconductor LM85
 455           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 456
 457           This driver can also be built as a module.  If so, the module
 458           will be called lm85.
 459
 460 config SENSORS_LM87
 461         tristate "National Semiconductor LM87 and compatibles"
 462         depends on I2C
 463         select HWMON_VID
 464         help
 465           If you say yes here you get support for National Semiconductor LM87
 466           and Analog Devices ADM1024 sensor chips.
 467
 468           This driver can also be built as a module.  If so, the module
 469           will be called lm87.
 470
 471 config SENSORS_LM90
 472         tristate "National Semiconductor LM90 and compatibles"
 473         depends on I2C
 474         help
 475           If you say yes here you get support for National Semiconductor LM90,
 476           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
 477           MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
 478
 479           The Analog Devices ADT7461 sensor chip is also supported, but only
 480           if found in ADM1032 compatibility mode.
 481
 482           This driver can also be built as a module.  If so, the module
 483           will be called lm90.
 484
 485 config SENSORS_LM92
 486         tristate "National Semiconductor LM92 and compatibles"
 487         depends on I2C
 488         help
 489           If you say yes here you get support for National Semiconductor LM92
 490           and Maxim MAX6635 sensor chips.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called lm92.
 494
 495 config SENSORS_LM93
 496         tristate "National Semiconductor LM93 and compatibles"
 497         depends on I2C
 498         select HWMON_VID
 499         help
 500           If you say yes here you get support for National Semiconductor LM93
 501           sensor chips.
 502
 503           This driver can also be built as a module.  If so, the module
 504           will be called lm93.
 505
 506 config SENSORS_MAX1619
 507         tristate "Maxim MAX1619 sensor chip"
 508         depends on I2C
 509         help
 510           If you say yes here you get support for MAX1619 sensor chip.
 511
 512           This driver can also be built as a module.  If so, the module
 513           will be called max1619.
 514
 515 config SENSORS_MAX6650
 516         tristate "Maxim MAX6650 sensor chip"
 517         depends on I2C && EXPERIMENTAL
 518         help
 519           If you say yes here you get support for the MAX6650 / MAX6651
 520           sensor chips.
 521
 522           This driver can also be built as a module.  If so, the module
 523           will be called max6650.
 524
 525 config SENSORS_PC87360
 526         tristate "National Semiconductor PC87360 family"
 527         select HWMON_VID
 528         help
 529           If you say yes here you get access to the hardware monitoring
 530           functions of the National Semiconductor PC8736x Super-I/O chips.
 531           The PC87360, PC87363 and PC87364 only have fan monitoring and
 532           control.  The PC87365 and PC87366 additionally have voltage and
 533           temperature monitoring.
 534
 535           This driver can also be built as a module.  If so, the module
 536           will be called pc87360.
 537
 538 config SENSORS_PC87427
 539         tristate "National Semiconductor PC87427"
 540         depends on EXPERIMENTAL
 541         help
 542           If you say yes here you get access to the hardware monitoring
 543           functions of the National Semiconductor PC87427 Super-I/O chip.
 544           The chip has two distinct logical devices, one for fan speed
 545           monitoring and control, and one for voltage and temperature
 546           monitoring. Only fan speed monitoring is supported right now.
 547
 548           This driver can also be built as a module.  If so, the module
 549           will be called pc87427.
 550
 551 config SENSORS_SIS5595
 552         tristate "Silicon Integrated Systems Corp. SiS5595"
 553         depends on PCI
 554         help
 555           If you say yes here you get support for the integrated sensors in
 556           SiS5595 South Bridges.
 557
 558           This driver can also be built as a module.  If so, the module
 559           will be called sis5595.
 560
 561 config SENSORS_DME1737
 562         tristate "SMSC DME1737, SCH311x and compatibles"
 563         depends on I2C && EXPERIMENTAL
 564         select HWMON_VID
 565         help
 566           If you say yes here you get support for the hardware monitoring
 567           and fan control features of the SMSC DME1737 (and compatibles
 568           like the Asus A8000) and SCH311x Super-I/O chips.
 569
 570           This driver can also be built as a module.  If so, the module
 571           will be called dme1737.
 572
 573 config SENSORS_SMSC47M1
 574         tristate "SMSC LPC47M10x and compatibles"
 575         help
 576           If you say yes here you get support for the integrated fan
 577           monitoring and control capabilities of the SMSC LPC47B27x,
 578           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 579           LPC47M192, LPC47M292 and LPC47M997 chips.
 580
 581           The temperature and voltage sensor features of the LPC47M15x,
 582           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 583           driver, select also "SMSC LPC47M192 and compatibles" below for
 584           those.
 585
 586           This driver can also be built as a module.  If so, the module
 587           will be called smsc47m1.
 588
 589 config SENSORS_SMSC47M192
 590         tristate "SMSC LPC47M192 and compatibles"
 591         depends on I2C && EXPERIMENTAL
 592         select HWMON_VID
 593         help
 594           If you say yes here you get support for the temperature and
 595           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 596           and LPC47M997 chips.
 597
 598           The fan monitoring and control capabilities of these chips
 599           are supported by another driver, select
 600           "SMSC LPC47M10x and compatibles" above. You need both drivers
 601           if you want fan control and voltage/temperature sensor support.
 602
 603           This driver can also be built as a module.  If so, the module
 604           will be called smsc47m192.
 605
 606 config SENSORS_SMSC47B397
 607         tristate "SMSC LPC47B397-NC"
 608         depends on EXPERIMENTAL
 609         help
 610           If you say yes here you get support for the SMSC LPC47B397-NC
 611           sensor chip.
 612
 613           This driver can also be built as a module.  If so, the module
 614           will be called smsc47b397.
 615
 616 config SENSORS_ADS7828
 617         tristate "Texas Instruments ADS7828"
 618         depends on I2C
 619         help
 620           If you say yes here you get support for Texas Instruments ADS7828
 621           12-bit 8-channel ADC device.
 622
 623           This driver can also be built as a module.  If so, the module
 624           will be called ads7828.
 625
 626 config SENSORS_THMC50
 627         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 628         depends on I2C && EXPERIMENTAL
 629         help
 630           If you say yes here you get support for Texas Instruments THMC50
 631           sensor chips and clones: the Analog Devices ADM1022.
 632
 633           This driver can also be built as a module.  If so, the module
 634           will be called thmc50.
 635
 636 config SENSORS_VIA686A
 637         tristate "VIA686A"
 638         depends on PCI
 639         help
 640           If you say yes here you get support for the integrated sensors in
 641           Via 686A/B South Bridges.
 642
 643           This driver can also be built as a module.  If so, the module
 644           will be called via686a.
 645
 646 config SENSORS_VT1211
 647         tristate "VIA VT1211"
 648         depends on EXPERIMENTAL
 649         select HWMON_VID
 650         help
 651           If you say yes here then you get support for hardware monitoring
 652           features of the VIA VT1211 Super-I/O chip.
 653
 654           This driver can also be built as a module.  If so, the module
 655           will be called vt1211.
 656
 657 config SENSORS_VT8231
 658         tristate "VIA VT8231"
 659         depends on PCI
 660         select HWMON_VID
 661         help
 662           If you say yes here then you get support for the integrated sensors
 663           in the VIA VT8231 device.
 664
 665           This driver can also be built as a module.  If so, the module
 666           will be called vt8231.
 667
 668 config SENSORS_W83781D
 669         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 670         depends on I2C
 671         select HWMON_VID
 672         help
 673           If you say yes here you get support for the Winbond W8378x series
 674           of sensor chips: the W83781D, W83782D and W83783S, and the similar
 675           Asus AS99127F.
 676
 677           This driver can also be built as a module.  If so, the module
 678           will be called w83781d.
 679
 680 config SENSORS_W83791D
 681         tristate "Winbond W83791D"
 682         depends on I2C && EXPERIMENTAL
 683         select HWMON_VID
 684         help
 685           If you say yes here you get support for the Winbond W83791D chip.
 686
 687           This driver can also be built as a module.  If so, the module
 688           will be called w83791d.
 689
 690 config SENSORS_W83792D
 691         tristate "Winbond W83792D"
 692         depends on I2C && EXPERIMENTAL
 693         help
 694           If you say yes here you get support for the Winbond W83792D chip.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called w83792d.
 698
 699 config SENSORS_W83793
 700         tristate "Winbond W83793"
 701         depends on I2C && EXPERIMENTAL
 702         select HWMON_VID
 703         help
 704           If you say yes here you get support for the Winbond W83793
 705           hardware monitoring chip.
 706
 707           This driver can also be built as a module.  If so, the module
 708           will be called w83793.
 709
 710 config SENSORS_W83L785TS
 711         tristate "Winbond W83L785TS-S"
 712         depends on I2C && EXPERIMENTAL
 713         help
 714           If you say yes here you get support for the Winbond W83L785TS-S
 715           sensor chip, which is used on the Asus A7N8X, among other
 716           motherboards.
 717
 718           This driver can also be built as a module.  If so, the module
 719           will be called w83l785ts.
 720
 721 config SENSORS_W83L786NG
 722         tristate "Winbond W83L786NG, W83L786NR"
 723         depends on I2C && EXPERIMENTAL
 724         help
 725           If you say yes here you get support for the Winbond W83L786NG
 726           and W83L786NR sensor chips.
 727
 728           This driver can also be built as a module.  If so, the module
 729           will be called w83l786ng.
 730
 731 config SENSORS_W83627HF
 732         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 733         select HWMON_VID
 734         help
 735           If you say yes here you get support for the Winbond W836X7 series
 736           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 737           W83697HF.
 738
 739           This driver can also be built as a module.  If so, the module
 740           will be called w83627hf.
 741
 742 config SENSORS_W83627EHF
 743         tristate "Winbond W83627EHF/DHG"
 744         select HWMON_VID
 745         help
 746           If you say yes here you get support for the hardware
 747           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 748
 749           This driver also supports the W83627EHG, which is the lead-free
 750           version of the W83627EHF, and the W83627DHG, which is a similar
 751           chip suited for specific Intel processors that use PECI such as
 752           the Core 2 Duo.
 753
 754           This driver can also be built as a module.  If so, the module
 755           will be called w83627ehf.
 756
 757 config SENSORS_HDAPS
 758         tristate "IBM Hard Drive Active Protection System (hdaps)"
 759         depends on INPUT && X86
 760         select INPUT_POLLDEV
 761         default n
 762         help
 763           This driver provides support for the IBM Hard Drive Active Protection
 764           System (hdaps), which provides an accelerometer and other misc. data.
 765           ThinkPads starting with the R50, T41, and X40 are supported.  The
 766           accelerometer data is readable via sysfs.
 767
 768           This driver also provides an absolute input class device, allowing
 769           the laptop to act as a pinball machine-esque joystick.
 770
 771           If your ThinkPad is not recognized by the driver, please update to latest
 772           BIOS. This is especially the case for some R52 ThinkPads.
 773
 774           Say Y here if you have an applicable laptop and want to experience
 775           the awesome power of hdaps.
 776
 777 config SENSORS_APPLESMC
 778         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 779         depends on INPUT && X86
 780         select NEW_LEDS
 781         select LEDS_CLASS
 782         select INPUT_POLLDEV
 783         default n
 784         help
 785           This driver provides support for the Apple System Management
 786           Controller, which provides an accelerometer (Apple Sudden Motion
 787           Sensor), light sensors, temperature sensors, keyboard backlight
 788           control and fan control.
 789
 790           Only Intel-based Apple's computers are supported (MacBook Pro,
 791           MacBook, MacMini).
 792
 793           Data from the different sensors, keyboard backlight control and fan
 794           control are accessible via sysfs.
 795
 796           This driver also provides an absolute input class device, allowing
 797           the laptop to act as a pinball machine-esque joystick.
 798
 799           Say Y here if you have an applicable laptop and want to experience
 800           the awesome power of applesmc.
 801
 802 config HWMON_DEBUG_CHIP
 803         bool "Hardware Monitoring Chip debugging messages"
 804         default n
 805         help
 806           Say Y here if you want the I2C chip drivers to produce a bunch of
 807           debug messages to the system log.  Select this if you are having
 808           a problem with I2C support and want to see more of what is going
 809           on.
 810
 811 endif # HWMON