drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && DMI && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && DMI && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7314
  72         tristate "Analog Devices AD7314 and compatibles"
  73         depends on SPI && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7314, ADT7301 and ADT7302 temperature sensors.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7314.
  80
  81 config SENSORS_AD7414
  82         tristate "Analog Devices AD7414"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7414 temperature monitoring chip.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7414.
  90
  91 config SENSORS_AD7418
  92         tristate "Analog Devices AD7416, AD7417 and AD7418"
  93         depends on I2C && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the Analog Devices
  96           AD7416, AD7417 and AD7418 temperature monitoring chips.
  97
  98           This driver can also be built as a module. If so, the module
  99           will be called ad7418.
 100
 101 config SENSORS_ADCXX
 102         tristate "National Semiconductor ADCxxxSxxx"
 103         depends on SPI_MASTER && EXPERIMENTAL
 104         help
 105           If you say yes here you get support for the National Semiconductor
 106           ADC<bb><c>S<sss> chip family, where
 107           * bb  is the resolution in number of bits (8, 10, 12)
 108           * c   is the number of channels (1, 2, 4, 8)
 109           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 110             kSPS and 101 for 1 MSPS)
 111
 112           Examples : ADC081S101, ADC124S501, ...
 113
 114           This driver can also be built as a module.  If so, the module
 115           will be called adcxx.
 116
 117 config SENSORS_ADM1021
 118         tristate "Analog Devices ADM1021 and compatibles"
 119         depends on I2C
 120         help
 121           If you say yes here you get support for Analog Devices ADM1021
 122           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 123           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 124
 125           This driver can also be built as a module.  If so, the module
 126           will be called adm1021.
 127
 128 config SENSORS_ADM1025
 129         tristate "Analog Devices ADM1025 and compatibles"
 130         depends on I2C
 131         select HWMON_VID
 132         help
 133           If you say yes here you get support for Analog Devices ADM1025
 134           and Philips NE1619 sensor chips.
 135
 136           This driver can also be built as a module.  If so, the module
 137           will be called adm1025.
 138
 139 config SENSORS_ADM1026
 140         tristate "Analog Devices ADM1026 and compatibles"
 141         depends on I2C
 142         select HWMON_VID
 143         help
 144           If you say yes here you get support for Analog Devices ADM1026
 145           sensor chip.
 146
 147           This driver can also be built as a module.  If so, the module
 148           will be called adm1026.
 149
 150 config SENSORS_ADM1029
 151         tristate "Analog Devices ADM1029"
 152         depends on I2C
 153         help
 154           If you say yes here you get support for Analog Devices ADM1029
 155           sensor chip.
 156           Very rare chip, please let us know you use it.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1029.
 160
 161 config SENSORS_ADM1031
 162         tristate "Analog Devices ADM1031 and compatibles"
 163         depends on I2C
 164         help
 165           If you say yes here you get support for Analog Devices ADM1031
 166           and ADM1030 sensor chips.
 167
 168           This driver can also be built as a module.  If so, the module
 169           will be called adm1031.
 170
 171 config SENSORS_ADM9240
 172         tristate "Analog Devices ADM9240 and compatibles"
 173         depends on I2C
 174         select HWMON_VID
 175         help
 176           If you say yes here you get support for Analog Devices ADM9240,
 177           Dallas DS1780, National Semiconductor LM81 sensor chips.
 178
 179           This driver can also be built as a module.  If so, the module
 180           will be called adm9240.
 181
 182 config SENSORS_ADT7411
 183         tristate "Analog Devices ADT7411"
 184         depends on I2C && EXPERIMENTAL
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7411 voltage and temperature monitoring chip.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7411.
 191
 192 config SENSORS_ADT7462
 193         tristate "Analog Devices ADT7462"
 194         depends on I2C && EXPERIMENTAL
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7462 temperature monitoring chips.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7462.
 201
 202 config SENSORS_ADT7470
 203         tristate "Analog Devices ADT7470"
 204         depends on I2C && EXPERIMENTAL
 205         help
 206           If you say yes here you get support for the Analog Devices
 207           ADT7470 temperature monitoring chips.
 208
 209           This driver can also be built as a module. If so, the module
 210           will be called adt7470.
 211
 212 config SENSORS_ADT7475
 213         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 214         depends on I2C
 215         select HWMON_VID
 216         help
 217           If you say yes here you get support for the Analog Devices
 218           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 219           chips.
 220
 221           This driver can also be build as a module.  If so, the module
 222           will be called adt7475.
 223
 224 config SENSORS_ASC7621
 225         tristate "Andigilog aSC7621"
 226         depends on I2C
 227         help
 228           If you say yes here you get support for the aSC7621
 229           family of SMBus sensors chip found on most Intel X38, X48, X58,
 230           945, 965 and 975 desktop boards.  Currently supported chips:
 231           aSC7621
 232           aSC7621a
 233
 234           This driver can also be built as a module.  If so, the module
 235           will be called asc7621.
 236
 237 config SENSORS_K8TEMP
 238         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 239         depends on X86 && PCI && EXPERIMENTAL
 240         help
 241           If you say yes here you get support for the temperature
 242           sensor(s) inside your CPU. Supported is whole AMD K8
 243           microarchitecture. Please note that you will need at least
 244           lm-sensors 2.10.1 for proper userspace support.
 245
 246           This driver can also be built as a module.  If so, the module
 247           will be called k8temp.
 248
 249 config SENSORS_K10TEMP
 250         tristate "AMD Family 10h+ temperature sensor"
 251         depends on X86 && PCI
 252         help
 253           If you say yes here you get support for the temperature
 254           sensor(s) inside your CPU. Supported are later revisions of
 255           the AMD Family 10h and all revisions of the AMD Family 11h,
 256           12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
 257
 258           This driver can also be built as a module.  If so, the module
 259           will be called k10temp.
 260
 261 config SENSORS_FAM15H_POWER
 262         tristate "AMD Family 15h processor power"
 263         depends on X86 && PCI
 264         help
 265           If you say yes here you get support for processor power
 266           information of your AMD family 15h CPU.
 267
 268           This driver can also be built as a module.  If so, the module
 269           will be called fam15h_power.
 270
 271 config SENSORS_ASB100
 272         tristate "Asus ASB100 Bach"
 273         depends on X86 && I2C && EXPERIMENTAL
 274         select HWMON_VID
 275         help
 276           If you say yes here you get support for the ASB100 Bach sensor
 277           chip found on some Asus mainboards.
 278
 279           This driver can also be built as a module.  If so, the module
 280           will be called asb100.
 281
 282 config SENSORS_ATXP1
 283         tristate "Attansic ATXP1 VID controller"
 284         depends on I2C && EXPERIMENTAL
 285         select HWMON_VID
 286         help
 287           If you say yes here you get support for the Attansic ATXP1 VID
 288           controller.
 289
 290           If your board have such a chip, you are able to control your CPU
 291           core and other voltages.
 292
 293           This driver can also be built as a module.  If so, the module
 294           will be called atxp1.
 295
 296 config SENSORS_DS620
 297         tristate "Dallas Semiconductor DS620"
 298         depends on I2C
 299         help
 300           If you say yes here you get support for Dallas Semiconductor
 301           DS620 sensor chip.
 302
 303           This driver can also be built as a module.  If so, the module
 304           will be called ds620.
 305
 306 config SENSORS_DS1621
 307         tristate "Dallas Semiconductor DS1621 and DS1625"
 308         depends on I2C
 309         help
 310           If you say yes here you get support for Dallas Semiconductor
 311           DS1621 and DS1625 sensor chips.
 312
 313           This driver can also be built as a module.  If so, the module
 314           will be called ds1621.
 315
 316 config SENSORS_EXYNOS4_TMU
 317         tristate "Temperature sensor on Samsung EXYNOS4"
 318         depends on ARCH_EXYNOS4
 319         help
 320           If you say yes here you get support for TMU (Thermal Managment
 321           Unit) on SAMSUNG EXYNOS4 series of SoC.
 322
 323           This driver can also be built as a module. If so, the module
 324           will be called exynos4-tmu.
 325
 326 config SENSORS_I5K_AMB
 327         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 328         depends on PCI && EXPERIMENTAL
 329         help
 330           If you say yes here you get support for FB-DIMM AMB temperature
 331           monitoring chips on systems with the Intel 5000 series chipset.
 332
 333           This driver can also be built as a module. If so, the module
 334           will be called i5k_amb.
 335
 336 config SENSORS_F71805F
 337         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 338         depends on !PPC
 339         help
 340           If you say yes here you get support for hardware monitoring
 341           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 342           Super-I/O chips.
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called f71805f.
 346
 347 config SENSORS_F71882FG
 348         tristate "Fintek F71882FG and compatibles"
 349         depends on !PPC
 350         help
 351           If you say yes here you get support for hardware monitoring
 352           features of many Fintek Super-I/O (LPC) chips. The currently
 353           supported chips are:
 354             F71808E/A
 355             F71858FG
 356             F71862FG
 357             F71863FG
 358             F71869F/E/A
 359             F71882FG
 360             F71883FG
 361             F71889FG/ED/A
 362             F8000
 363             F81801U
 364             F81865F
 365
 366           This driver can also be built as a module.  If so, the module
 367           will be called f71882fg.
 368
 369 config SENSORS_F75375S
 370         tristate "Fintek F75375S/SP, F75373 and F75387"
 371         depends on I2C
 372         help
 373           If you say yes here you get support for hardware monitoring
 374           features of the Fintek F75375S/SP, F75373 and F75387
 375
 376           This driver can also be built as a module.  If so, the module
 377           will be called f75375s.
 378
 379 config SENSORS_FSCHMD
 380         tristate "Fujitsu Siemens Computers sensor chips"
 381         depends on X86 && I2C
 382         help
 383           If you say yes here you get support for the following Fujitsu
 384           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 385           Heimdall, Heracles, Hades and Syleus including support for the
 386           integrated watchdog.
 387
 388           This is a merged driver for FSC sensor chips replacing the fscpos,
 389           fscscy and fscher drivers and adding support for several other FSC
 390           sensor chips.
 391
 392           This driver can also be built as a module.  If so, the module
 393           will be called fschmd.
 394
 395 config SENSORS_G760A
 396         tristate "GMT G760A"
 397         depends on I2C
 398         help
 399           If you say yes here you get support for Global Mixed-mode
 400           Technology Inc G760A fan speed PWM controller chips.
 401
 402           This driver can also be built as a module.  If so, the module
 403           will be called g760a.
 404
 405 config SENSORS_GL518SM
 406         tristate "Genesys Logic GL518SM"
 407         depends on I2C
 408         help
 409           If you say yes here you get support for Genesys Logic GL518SM
 410           sensor chips.
 411
 412           This driver can also be built as a module.  If so, the module
 413           will be called gl518sm.
 414
 415 config SENSORS_GL520SM
 416         tristate "Genesys Logic GL520SM"
 417         depends on I2C
 418         select HWMON_VID
 419         help
 420           If you say yes here you get support for Genesys Logic GL520SM
 421           sensor chips.
 422
 423           This driver can also be built as a module.  If so, the module
 424           will be called gl520sm.
 425
 426 config SENSORS_GPIO_FAN
 427         tristate "GPIO fan"
 428         depends on GENERIC_GPIO
 429         help
 430           If you say yes here you get support for fans connected to GPIO lines.
 431
 432           This driver can also be built as a module.  If so, the module
 433           will be called gpio-fan.
 434
 435 config SENSORS_CORETEMP
 436         tristate "Intel Core/Core2/Atom temperature sensor"
 437         depends on X86 && PCI && EXPERIMENTAL
 438         help
 439           If you say yes here you get support for the temperature
 440           sensor inside your CPU. Most of the family 6 CPUs
 441           are supported. Check Documentation/hwmon/coretemp for details.
 442
 443 config SENSORS_IBMAEM
 444         tristate "IBM Active Energy Manager temperature/power sensors and control"
 445         select IPMI_SI
 446         depends on IPMI_HANDLER
 447         help
 448           If you say yes here you get support for the temperature and
 449           power sensors and capping hardware in various IBM System X
 450           servers that support Active Energy Manager.  This includes
 451           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 452           and certain HC10/HS2x/LS2x/QS2x blades.
 453
 454           This driver can also be built as a module.  If so, the module
 455           will be called ibmaem.
 456
 457 config SENSORS_IBMPEX
 458         tristate "IBM PowerExecutive temperature/power sensors"
 459         select IPMI_SI
 460         depends on IPMI_HANDLER
 461         help
 462           If you say yes here you get support for the temperature and
 463           power sensors in various IBM System X servers that support
 464           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 465           x3655, and x3755; the x3800, x3850, and x3950 models that have
 466           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 467
 468           This driver can also be built as a module.  If so, the module
 469           will be called ibmpex.
 470
 471 config SENSORS_IT87
 472         tristate "ITE IT87xx and compatibles"
 473         depends on !PPC
 474         select HWMON_VID
 475         help
 476           If you say yes here you get support for ITE IT8705F, IT8712F,
 477           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E
 478           sensor chips, and the SiS960 clone.
 479
 480           This driver can also be built as a module.  If so, the module
 481           will be called it87.
 482
 483 config SENSORS_JZ4740
 484         tristate "Ingenic JZ4740 SoC ADC driver"
 485         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 486         help
 487           If you say yes here you get support for reading adc values from the ADCIN
 488           pin on Ingenic JZ4740 SoC based boards.
 489
 490           This driver can also be build as a module. If so, the module will be
 491           called jz4740-hwmon.
 492
 493 config SENSORS_JC42
 494         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 495         depends on I2C
 496         help
 497           If you say yes here, you get support for JEDEC JC42.4 compliant
 498           temperature sensors, which are used on many DDR3 memory modules for
 499           mobile devices and servers.  Support will include, but not be limited
 500           to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
 501           MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 502
 503           This driver can also be built as a module.  If so, the module
 504           will be called jc42.
 505
 506 config SENSORS_LINEAGE
 507         tristate "Lineage Compact Power Line Power Entry Module"
 508         depends on I2C && EXPERIMENTAL
 509         help
 510           If you say yes here you get support for the Lineage Compact Power Line
 511           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 512           CP2000DC, CP2725, and others.
 513
 514           This driver can also be built as a module.  If so, the module
 515           will be called lineage-pem.
 516
 517 config SENSORS_LM63
 518         tristate "National Semiconductor LM63 and compatibles"
 519         depends on I2C
 520         help
 521           If you say yes here you get support for the National
 522           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 523           sensors with integrated fan control.  Such chips are found
 524           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 525           others.
 526
 527           This driver can also be built as a module.  If so, the module
 528           will be called lm63.
 529
 530 config SENSORS_LM70
 531         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 532         depends on SPI_MASTER
 533         help
 534           If you say yes here you get support for the National Semiconductor
 535           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 536           sensor chips.
 537
 538           This driver can also be built as a module.  If so, the module
 539           will be called lm70.
 540
 541 config SENSORS_LM73
 542         tristate "National Semiconductor LM73"
 543         depends on I2C
 544         help
 545           If you say yes here you get support for National Semiconductor LM73
 546           sensor chips.
 547           This driver can also be built as a module.  If so, the module
 548           will be called lm73.
 549
 550 config SENSORS_LM75
 551         tristate "National Semiconductor LM75 and compatibles"
 552         depends on I2C
 553         help
 554           If you say yes here you get support for one common type of
 555           temperature sensor chip, with models including:
 556
 557                 - Analog Devices ADT75
 558                 - Dallas Semiconductor DS75 and DS1775
 559                 - Maxim MAX6625 and MAX6626
 560                 - Microchip MCP980x
 561                 - National Semiconductor LM75, LM75A
 562                 - NXP's LM75A
 563                 - ST Microelectronics STDS75
 564                 - TelCom (now Microchip) TCN75
 565                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 566                   TMP275
 567
 568           This driver supports driver model based binding through board
 569           specific I2C device tables.
 570
 571           It also supports the "legacy" style of driver binding.  To use
 572           that with some chips which don't replicate LM75 quirks exactly,
 573           you may need the "force" module parameter.
 574
 575           This driver can also be built as a module.  If so, the module
 576           will be called lm75.
 577
 578 config SENSORS_LM77
 579         tristate "National Semiconductor LM77"
 580         depends on I2C
 581         help
 582           If you say yes here you get support for National Semiconductor LM77
 583           sensor chips.
 584
 585           This driver can also be built as a module.  If so, the module
 586           will be called lm77.
 587
 588 config SENSORS_LM78
 589         tristate "National Semiconductor LM78 and compatibles"
 590         depends on I2C
 591         select HWMON_VID
 592         help
 593           If you say yes here you get support for National Semiconductor LM78,
 594           LM78-J and LM79.
 595
 596           This driver can also be built as a module.  If so, the module
 597           will be called lm78.
 598
 599 config SENSORS_LM80
 600         tristate "National Semiconductor LM80"
 601         depends on I2C
 602         help
 603           If you say yes here you get support for National Semiconductor
 604           LM80 sensor chips.
 605
 606           This driver can also be built as a module.  If so, the module
 607           will be called lm80.
 608
 609 config SENSORS_LM83
 610         tristate "National Semiconductor LM83 and compatibles"
 611         depends on I2C
 612         help
 613           If you say yes here you get support for National Semiconductor
 614           LM82 and LM83 sensor chips.
 615
 616           This driver can also be built as a module.  If so, the module
 617           will be called lm83.
 618
 619 config SENSORS_LM85
 620         tristate "National Semiconductor LM85 and compatibles"
 621         depends on I2C
 622         select HWMON_VID
 623         help
 624           If you say yes here you get support for National Semiconductor LM85
 625           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 626           EMC6D101, EMC6D102, and EMC6D103.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called lm85.
 630
 631 config SENSORS_LM87
 632         tristate "National Semiconductor LM87 and compatibles"
 633         depends on I2C
 634         select HWMON_VID
 635         help
 636           If you say yes here you get support for National Semiconductor LM87
 637           and Analog Devices ADM1024 sensor chips.
 638
 639           This driver can also be built as a module.  If so, the module
 640           will be called lm87.
 641
 642 config SENSORS_LM90
 643         tristate "National Semiconductor LM90 and compatibles"
 644         depends on I2C
 645         help
 646           If you say yes here you get support for National Semiconductor LM90,
 647           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 648           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 649           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 650           Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
 651
 652           This driver can also be built as a module.  If so, the module
 653           will be called lm90.
 654
 655 config SENSORS_LM92
 656         tristate "National Semiconductor LM92 and compatibles"
 657         depends on I2C
 658         help
 659           If you say yes here you get support for National Semiconductor LM92
 660           and Maxim MAX6635 sensor chips.
 661
 662           This driver can also be built as a module.  If so, the module
 663           will be called lm92.
 664
 665 config SENSORS_LM93
 666         tristate "National Semiconductor LM93 and compatibles"
 667         depends on I2C
 668         select HWMON_VID
 669         help
 670           If you say yes here you get support for National Semiconductor LM93,
 671           LM94, and compatible sensor chips.
 672
 673           This driver can also be built as a module.  If so, the module
 674           will be called lm93.
 675
 676 config SENSORS_LTC4151
 677         tristate "Linear Technology LTC4151"
 678         depends on I2C
 679         default n
 680         help
 681           If you say yes here you get support for Linear Technology LTC4151
 682           High Voltage I2C Current and Voltage Monitor interface.
 683
 684           This driver can also be built as a module. If so, the module will
 685           be called ltc4151.
 686
 687 config SENSORS_LTC4215
 688         tristate "Linear Technology LTC4215"
 689         depends on I2C && EXPERIMENTAL
 690         default n
 691         help
 692           If you say yes here you get support for Linear Technology LTC4215
 693           Hot Swap Controller I2C interface.
 694
 695           This driver can also be built as a module. If so, the module will
 696           be called ltc4215.
 697
 698 config SENSORS_LTC4245
 699         tristate "Linear Technology LTC4245"
 700         depends on I2C && EXPERIMENTAL
 701         default n
 702         help
 703           If you say yes here you get support for Linear Technology LTC4245
 704           Multiple Supply Hot Swap Controller I2C interface.
 705
 706           This driver can also be built as a module. If so, the module will
 707           be called ltc4245.
 708
 709 config SENSORS_LTC4261
 710         tristate "Linear Technology LTC4261"
 711         depends on I2C && EXPERIMENTAL
 712         default n
 713         help
 714           If you say yes here you get support for Linear Technology LTC4261
 715           Negative Voltage Hot Swap Controller I2C interface.
 716
 717           This driver can also be built as a module. If so, the module will
 718           be called ltc4261.
 719
 720 config SENSORS_LM95241
 721         tristate "National Semiconductor LM95241 and compatibles"
 722         depends on I2C
 723         help
 724           If you say yes here you get support for LM95231 and LM95241 sensor
 725           chips.
 726
 727           This driver can also be built as a module.  If so, the module
 728           will be called lm95241.
 729
 730 config SENSORS_LM95245
 731         tristate "National Semiconductor LM95245 sensor chip"
 732         depends on I2C && EXPERIMENTAL
 733         help
 734           If you say yes here you get support for LM95245 sensor chip.
 735
 736           This driver can also be built as a module.  If so, the module
 737           will be called lm95245.
 738
 739 config SENSORS_MAX1111
 740         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 741         depends on SPI_MASTER
 742         help
 743           Say y here to support Maxim's MAX1111 ADC chips.
 744
 745           This driver can also be built as a module.  If so, the module
 746           will be called max1111.
 747
 748 config SENSORS_MAX16065
 749         tristate "Maxim MAX16065 System Manager and compatibles"
 750         depends on I2C
 751         help
 752           If you say yes here you get support for hardware monitoring
 753           capabilities of the following Maxim System Manager chips.
 754             MAX16065
 755             MAX16066
 756             MAX16067
 757             MAX16068
 758             MAX16070
 759             MAX16071
 760
 761           This driver can also be built as a module.  If so, the module
 762           will be called max16065.
 763
 764 config SENSORS_MAX1619
 765         tristate "Maxim MAX1619 sensor chip"
 766         depends on I2C
 767         help
 768           If you say yes here you get support for MAX1619 sensor chip.
 769
 770           This driver can also be built as a module.  If so, the module
 771           will be called max1619.
 772
 773 config SENSORS_MAX1668
 774         tristate "Maxim MAX1668 and compatibles"
 775         depends on I2C && EXPERIMENTAL
 776         help
 777           If you say yes here you get support for MAX1668, MAX1989 and
 778           MAX1805 chips.
 779
 780           This driver can also be built as a module.  If so, the module
 781           will be called max1668.
 782
 783 config SENSORS_MAX6639
 784         tristate "Maxim MAX6639 sensor chip"
 785         depends on I2C && EXPERIMENTAL
 786         help
 787           If you say yes here you get support for the MAX6639
 788           sensor chips.
 789
 790           This driver can also be built as a module.  If so, the module
 791           will be called max6639.
 792
 793 config SENSORS_MAX6642
 794         tristate "Maxim MAX6642 sensor chip"
 795         depends on I2C && EXPERIMENTAL
 796         help
 797           If you say yes here you get support for MAX6642 sensor chip.
 798           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 799           with Overtemperature Alarm from Maxim.
 800
 801           This driver can also be built as a module.  If so, the module
 802           will be called max6642.
 803
 804 config SENSORS_MAX6650
 805         tristate "Maxim MAX6650 sensor chip"
 806         depends on I2C && EXPERIMENTAL
 807         help
 808           If you say yes here you get support for the MAX6650 / MAX6651
 809           sensor chips.
 810
 811           This driver can also be built as a module.  If so, the module
 812           will be called max6650.
 813
 814 config SENSORS_NTC_THERMISTOR
 815         tristate "NTC thermistor support"
 816         depends on EXPERIMENTAL
 817         help
 818           This driver supports NTC thermistors sensor reading and its
 819           interpretation. The driver can also monitor the temperature and
 820           send notifications about the temperature.
 821
 822           Currently, this driver supports
 823           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 824
 825           This driver can also be built as a module.  If so, the module
 826           will be called ntc-thermistor.
 827
 828 config SENSORS_PC87360
 829         tristate "National Semiconductor PC87360 family"
 830         depends on !PPC
 831         select HWMON_VID
 832         help
 833           If you say yes here you get access to the hardware monitoring
 834           functions of the National Semiconductor PC8736x Super-I/O chips.
 835           The PC87360, PC87363 and PC87364 only have fan monitoring and
 836           control.  The PC87365 and PC87366 additionally have voltage and
 837           temperature monitoring.
 838
 839           This driver can also be built as a module.  If so, the module
 840           will be called pc87360.
 841
 842 config SENSORS_PC87427
 843         tristate "National Semiconductor PC87427"
 844         depends on !PPC
 845         help
 846           If you say yes here you get access to the hardware monitoring
 847           functions of the National Semiconductor PC87427 Super-I/O chip.
 848           The chip has two distinct logical devices, one for fan speed
 849           monitoring and control, and one for voltage and temperature
 850           monitoring. Fan speed monitoring and control are supported, as
 851           well as temperature monitoring. Voltages aren't supported yet.
 852
 853           This driver can also be built as a module.  If so, the module
 854           will be called pc87427.
 855
 856 config SENSORS_PCF8591
 857         tristate "Philips PCF8591 ADC/DAC"
 858         depends on I2C
 859         default n
 860         help
 861           If you say yes here you get support for Philips PCF8591 4-channel
 862           ADC, 1-channel DAC chips.
 863
 864           This driver can also be built as a module.  If so, the module
 865           will be called pcf8591.
 866
 867           These devices are hard to detect and rarely found on mainstream
 868           hardware.  If unsure, say N.
 869
 870 source drivers/hwmon/pmbus/Kconfig
 871
 872 config SENSORS_SHT15
 873         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 874         depends on GENERIC_GPIO
 875         help
 876           If you say yes here you get support for the Sensiron SHT10, SHT11,
 877           SHT15, SHT71, SHT75 humidity and temperature sensors.
 878
 879           This driver can also be built as a module.  If so, the module
 880           will be called sht15.
 881
 882 config SENSORS_SHT21
 883         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 884         depends on I2C
 885         help
 886           If you say yes here you get support for the Sensiron SHT21, SHT25
 887           humidity and temperature sensors.
 888
 889           This driver can also be built as a module.  If so, the module
 890           will be called sht21.
 891
 892 config SENSORS_S3C
 893         tristate "Samsung built-in ADC"
 894         depends on S3C_ADC
 895         help
 896           If you say yes here you get support for the on-board ADCs of
 897           the Samsung S3C24XX, S3C64XX and other series of SoC
 898
 899           This driver can also be built as a module. If so, the module
 900           will be called s3c-hwmon.
 901
 902 config SENSORS_S3C_RAW
 903         bool "Include raw channel attributes in sysfs"
 904         depends on SENSORS_S3C
 905         help
 906           Say Y here if you want to include raw copies of all the ADC
 907           channels in sysfs.
 908
 909 config SENSORS_SIS5595
 910         tristate "Silicon Integrated Systems Corp. SiS5595"
 911         depends on PCI
 912         help
 913           If you say yes here you get support for the integrated sensors in
 914           SiS5595 South Bridges.
 915
 916           This driver can also be built as a module.  If so, the module
 917           will be called sis5595.
 918
 919 config SENSORS_SMM665
 920         tristate "Summit Microelectronics SMM665"
 921         depends on I2C && EXPERIMENTAL
 922         default n
 923         help
 924           If you say yes here you get support for the hardware monitoring
 925           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 926           Active DC Output Controller / Monitor.
 927
 928           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 929           Support for those chips is untested.
 930
 931           This driver can also be built as a module. If so, the module will
 932           be called smm665.
 933
 934 config SENSORS_DME1737
 935         tristate "SMSC DME1737, SCH311x and compatibles"
 936         depends on I2C && EXPERIMENTAL && !PPC
 937         select HWMON_VID
 938         help
 939           If you say yes here you get support for the hardware monitoring
 940           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 941           Asus A8000 Super-I/O chips.
 942
 943           This driver can also be built as a module.  If so, the module
 944           will be called dme1737.
 945
 946 config SENSORS_EMC1403
 947         tristate "SMSC EMC1403/23 thermal sensor"
 948         depends on I2C
 949         help
 950           If you say yes here you get support for the SMSC EMC1403/23
 951           temperature monitoring chip.
 952
 953           Threshold values can be configured using sysfs.
 954           Data from the different diodes are accessible via sysfs.
 955
 956 config SENSORS_EMC2103
 957         tristate "SMSC EMC2103"
 958         depends on I2C
 959         help
 960           If you say yes here you get support for the temperature
 961           and fan sensors of the SMSC EMC2103 chips.
 962
 963           This driver can also be built as a module.  If so, the module
 964           will be called emc2103.
 965
 966 config SENSORS_EMC6W201
 967         tristate "SMSC EMC6W201"
 968         depends on I2C
 969         help
 970           If you say yes here you get support for the SMSC EMC6W201
 971           hardware monitoring chip.
 972
 973           This driver can also be built as a module.  If so, the module
 974           will be called emc6w201.
 975
 976 config SENSORS_SMSC47M1
 977         tristate "SMSC LPC47M10x and compatibles"
 978         depends on !PPC
 979         help
 980           If you say yes here you get support for the integrated fan
 981           monitoring and control capabilities of the SMSC LPC47B27x,
 982           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 983           LPC47M192, LPC47M292 and LPC47M997 chips.
 984
 985           The temperature and voltage sensor features of the LPC47M15x,
 986           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 987           driver, select also "SMSC LPC47M192 and compatibles" below for
 988           those.
 989
 990           This driver can also be built as a module.  If so, the module
 991           will be called smsc47m1.
 992
 993 config SENSORS_SMSC47M192
 994         tristate "SMSC LPC47M192 and compatibles"
 995         depends on I2C
 996         select HWMON_VID
 997         help
 998           If you say yes here you get support for the temperature and
 999           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1000           and LPC47M997 chips.
1001
1002           The fan monitoring and control capabilities of these chips
1003           are supported by another driver, select
1004           "SMSC LPC47M10x and compatibles" above. You need both drivers
1005           if you want fan control and voltage/temperature sensor support.
1006
1007           This driver can also be built as a module.  If so, the module
1008           will be called smsc47m192.
1009
1010 config SENSORS_SMSC47B397
1011         tristate "SMSC LPC47B397-NC"
1012         depends on EXPERIMENTAL && !PPC
1013         help
1014           If you say yes here you get support for the SMSC LPC47B397-NC
1015           sensor chip.
1016
1017           This driver can also be built as a module.  If so, the module
1018           will be called smsc47b397.
1019
1020 config SENSORS_SCH56XX_COMMON
1021         tristate
1022         default n
1023
1024 config SENSORS_SCH5627
1025         tristate "SMSC SCH5627"
1026         depends on !PPC
1027         select SENSORS_SCH56XX_COMMON
1028         help
1029           If you say yes here you get support for the hardware monitoring
1030           features of the SMSC SCH5627 Super-I/O chip.
1031
1032           This driver can also be built as a module.  If so, the module
1033           will be called sch5627.
1034
1035 config SENSORS_SCH5636
1036         tristate "SMSC SCH5636"
1037         depends on !PPC
1038         select SENSORS_SCH56XX_COMMON
1039         help
1040           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1041           hardware monitoring solutions, allowing motherboard manufacturers to
1042           create their own custom hwmon solution based upon the SCH5636.
1043
1044           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1045           hwmon solution. Say yes here if you want support for the Fujitsu
1046           Theseus' hardware monitoring features.
1047
1048           This driver can also be built as a module.  If so, the module
1049           will be called sch5636.
1050
1051 config SENSORS_ADS1015
1052         tristate "Texas Instruments ADS1015"
1053         depends on I2C
1054         help
1055           If you say yes here you get support for Texas Instruments ADS1015
1056           12-bit 4-input ADC device.
1057
1058           This driver can also be built as a module.  If so, the module
1059           will be called ads1015.
1060
1061 config SENSORS_ADS7828
1062         tristate "Texas Instruments ADS7828"
1063         depends on I2C
1064         help
1065           If you say yes here you get support for Texas Instruments ADS7828
1066           12-bit 8-channel ADC device.
1067
1068           This driver can also be built as a module.  If so, the module
1069           will be called ads7828.
1070
1071 config SENSORS_ADS7871
1072         tristate "Texas Instruments ADS7871 A/D converter"
1073         depends on SPI
1074         help
1075           If you say yes here you get support for TI ADS7871 & ADS7870
1076
1077           This driver can also be built as a module.  If so, the module
1078           will be called ads7871.
1079
1080 config SENSORS_AMC6821
1081         tristate "Texas Instruments AMC6821"
1082         depends on I2C  && EXPERIMENTAL
1083         help
1084           If you say yes here you get support for the Texas Instruments
1085           AMC6821 hardware monitoring chips.
1086
1087           This driver can also be build as a module.  If so, the module
1088           will be called amc6821.
1089
1090 config SENSORS_THMC50
1091         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1092         depends on I2C
1093         help
1094           If you say yes here you get support for Texas Instruments THMC50
1095           sensor chips and clones: the Analog Devices ADM1022.
1096
1097           This driver can also be built as a module.  If so, the module
1098           will be called thmc50.
1099
1100 config SENSORS_TMP102
1101         tristate "Texas Instruments TMP102"
1102         depends on I2C && EXPERIMENTAL
1103         help
1104           If you say yes here you get support for Texas Instruments TMP102
1105           sensor chips.
1106
1107           This driver can also be built as a module.  If so, the module
1108           will be called tmp102.
1109
1110 config SENSORS_TMP401
1111         tristate "Texas Instruments TMP401 and compatibles"
1112         depends on I2C && EXPERIMENTAL
1113         help
1114           If you say yes here you get support for Texas Instruments TMP401 and
1115           TMP411 temperature sensor chips.
1116
1117           This driver can also be built as a module.  If so, the module
1118           will be called tmp401.
1119
1120 config SENSORS_TMP421
1121         tristate "Texas Instruments TMP421 and compatible"
1122         depends on I2C && EXPERIMENTAL
1123         help
1124           If you say yes here you get support for Texas Instruments TMP421,
1125           TMP422 and TMP423 temperature sensor chips.
1126
1127           This driver can also be built as a module.  If so, the module
1128           will be called tmp421.
1129
1130 config SENSORS_TWL4030_MADC
1131         tristate "Texas Instruments TWL4030 MADC Hwmon"
1132         depends on TWL4030_MADC
1133         help
1134         If you say yes here you get hwmon support for triton
1135         TWL4030-MADC.
1136
1137         This driver can also be built as a module. If so it will be called
1138         twl4030-madc-hwmon.
1139
1140 config SENSORS_VIA_CPUTEMP
1141         tristate "VIA CPU temperature sensor"
1142         depends on X86
1143         select HWMON_VID
1144         help
1145           If you say yes here you get support for the temperature
1146           sensor inside your CPU. Supported are all known variants of
1147           the VIA C7 and Nano.
1148
1149 config SENSORS_VIA686A
1150         tristate "VIA686A"
1151         depends on PCI
1152         help
1153           If you say yes here you get support for the integrated sensors in
1154           Via 686A/B South Bridges.
1155
1156           This driver can also be built as a module.  If so, the module
1157           will be called via686a.
1158
1159 config SENSORS_VT1211
1160         tristate "VIA VT1211"
1161         depends on !PPC
1162         select HWMON_VID
1163         help
1164           If you say yes here then you get support for hardware monitoring
1165           features of the VIA VT1211 Super-I/O chip.
1166
1167           This driver can also be built as a module.  If so, the module
1168           will be called vt1211.
1169
1170 config SENSORS_VT8231
1171         tristate "VIA VT8231"
1172         depends on PCI
1173         select HWMON_VID
1174         help
1175           If you say yes here then you get support for the integrated sensors
1176           in the VIA VT8231 device.
1177
1178           This driver can also be built as a module.  If so, the module
1179           will be called vt8231.
1180
1181 config SENSORS_W83781D
1182         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1183         depends on I2C
1184         select HWMON_VID
1185         help
1186           If you say yes here you get support for the Winbond W8378x series
1187           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1188           Asus AS99127F.
1189
1190           This driver can also be built as a module.  If so, the module
1191           will be called w83781d.
1192
1193 config SENSORS_W83791D
1194         tristate "Winbond W83791D"
1195         depends on I2C
1196         select HWMON_VID
1197         help
1198           If you say yes here you get support for the Winbond W83791D chip.
1199
1200           This driver can also be built as a module.  If so, the module
1201           will be called w83791d.
1202
1203 config SENSORS_W83792D
1204         tristate "Winbond W83792D"
1205         depends on I2C
1206         help
1207           If you say yes here you get support for the Winbond W83792D chip.
1208
1209           This driver can also be built as a module.  If so, the module
1210           will be called w83792d.
1211
1212 config SENSORS_W83793
1213         tristate "Winbond W83793"
1214         depends on I2C && EXPERIMENTAL
1215         select HWMON_VID
1216         help
1217           If you say yes here you get support for the Winbond W83793
1218           hardware monitoring chip, including support for the integrated
1219           watchdog.
1220
1221           This driver can also be built as a module.  If so, the module
1222           will be called w83793.
1223
1224 config SENSORS_W83795
1225         tristate "Winbond/Nuvoton W83795G/ADG"
1226         depends on I2C && EXPERIMENTAL
1227         help
1228           If you say yes here you get support for the Winbond W83795G and
1229           W83795ADG hardware monitoring chip.
1230
1231           This driver can also be built as a module.  If so, the module
1232           will be called w83795.
1233
1234 config SENSORS_W83795_FANCTRL
1235         boolean "Include fan control support (DANGEROUS)"
1236         depends on SENSORS_W83795 && EXPERIMENTAL
1237         default n
1238         help
1239           If you say yes here, support for the both manual and automatic
1240           fan control features will be included in the driver.
1241
1242           This part of the code wasn't carefully reviewed and tested yet,
1243           so enabling this option is strongly discouraged on production
1244           servers. Only developers and testers should enable it for the
1245           time being.
1246
1247           Please also note that this option will create sysfs attribute
1248           files which may change in the future, so you shouldn't rely
1249           on them being stable.
1250
1251 config SENSORS_W83L785TS
1252         tristate "Winbond W83L785TS-S"
1253         depends on I2C && EXPERIMENTAL
1254         help
1255           If you say yes here you get support for the Winbond W83L785TS-S
1256           sensor chip, which is used on the Asus A7N8X, among other
1257           motherboards.
1258
1259           This driver can also be built as a module.  If so, the module
1260           will be called w83l785ts.
1261
1262 config SENSORS_W83L786NG
1263         tristate "Winbond W83L786NG, W83L786NR"
1264         depends on I2C && EXPERIMENTAL
1265         help
1266           If you say yes here you get support for the Winbond W83L786NG
1267           and W83L786NR sensor chips.
1268
1269           This driver can also be built as a module.  If so, the module
1270           will be called w83l786ng.
1271
1272 config SENSORS_W83627HF
1273         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1274         depends on !PPC
1275         select HWMON_VID
1276         help
1277           If you say yes here you get support for the Winbond W836X7 series
1278           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1279           W83697HF.
1280
1281           This driver can also be built as a module.  If so, the module
1282           will be called w83627hf.
1283
1284 config SENSORS_W83627EHF
1285         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1286         depends on !PPC
1287         select HWMON_VID
1288         help
1289           If you say yes here you get support for the hardware
1290           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1291
1292           This driver also supports the W83627EHG, which is the lead-free
1293           version of the W83627EHF, and the W83627DHG, which is a similar
1294           chip suited for specific Intel processors that use PECI such as
1295           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1296           version of the W83627DHG (as far as hardware monitoring goes.)
1297
1298           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1299           (also known as W83667HG-I), and NCT6776F.
1300
1301           This driver can also be built as a module.  If so, the module
1302           will be called w83627ehf.
1303
1304 config SENSORS_WM831X
1305         tristate "WM831x PMICs"
1306         depends on MFD_WM831X
1307         help
1308           If you say yes here you get support for the hardware
1309           monitoring functionality of the Wolfson Microelectronics
1310           WM831x series of PMICs.
1311
1312           This driver can also be built as a module.  If so, the module
1313           will be called wm831x-hwmon.
1314
1315 config SENSORS_WM8350
1316         tristate "Wolfson Microelectronics WM835x"
1317         depends on MFD_WM8350
1318         help
1319           If you say yes here you get support for the hardware
1320           monitoring features of the WM835x series of PMICs.
1321
1322           This driver can also be built as a module.  If so, the module
1323           will be called wm8350-hwmon.
1324
1325 config SENSORS_ULTRA45
1326         tristate "Sun Ultra45 PIC16F747"
1327         depends on SPARC64
1328         help
1329           This driver provides support for the Ultra45 workstation environmental
1330           sensors.
1331
1332 config SENSORS_APPLESMC
1333         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1334         depends on INPUT && X86
1335         select NEW_LEDS
1336         select LEDS_CLASS
1337         select INPUT_POLLDEV
1338         default n
1339         help
1340           This driver provides support for the Apple System Management
1341           Controller, which provides an accelerometer (Apple Sudden Motion
1342           Sensor), light sensors, temperature sensors, keyboard backlight
1343           control and fan control.
1344
1345           Only Intel-based Apple's computers are supported (MacBook Pro,
1346           MacBook, MacMini).
1347
1348           Data from the different sensors, keyboard backlight control and fan
1349           control are accessible via sysfs.
1350
1351           This driver also provides an absolute input class device, allowing
1352           the laptop to act as a pinball machine-esque joystick.
1353
1354           Say Y here if you have an applicable laptop and want to experience
1355           the awesome power of applesmc.
1356
1357 config SENSORS_MC13783_ADC
1358         tristate "Freescale MC13783 ADC"
1359         depends on MFD_MC13783
1360         help
1361           Support for the A/D converter on MC13783 PMIC.
1362
1363 if ACPI
1364
1365 comment "ACPI drivers"
1366
1367 config SENSORS_ACPI_POWER
1368         tristate "ACPI 4.0 power meter"
1369         help
1370           This driver exposes ACPI 4.0 power meters as hardware monitoring
1371           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1372           and a power meter.
1373
1374           To compile this driver as a module, choose M here:
1375           the module will be called acpi_power_meter.
1376
1377 config SENSORS_ATK0110
1378         tristate "ASUS ATK0110"
1379         depends on X86 && EXPERIMENTAL
1380         help
1381           If you say yes here you get support for the ACPI hardware
1382           monitoring interface found in many ASUS motherboards. This
1383           driver will provide readings of fans, voltages and temperatures
1384           through the system firmware.
1385
1386           This driver can also be built as a module. If so, the module
1387           will be called asus_atk0110.
1388
1389 endif # ACPI
1390
1391 endif # HWMON