drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && DMI && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && DMI && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 114
 115           This driver can also be built as a module.  If so, the module
 116           will be called adm1021.
 117
 118 config SENSORS_ADM1025
 119         tristate "Analog Devices ADM1025 and compatibles"
 120         depends on I2C
 121         select HWMON_VID
 122         help
 123           If you say yes here you get support for Analog Devices ADM1025
 124           and Philips NE1619 sensor chips.
 125
 126           This driver can also be built as a module.  If so, the module
 127           will be called adm1025.
 128
 129 config SENSORS_ADM1026
 130         tristate "Analog Devices ADM1026 and compatibles"
 131         depends on I2C
 132         select HWMON_VID
 133         help
 134           If you say yes here you get support for Analog Devices ADM1026
 135           sensor chip.
 136
 137           This driver can also be built as a module.  If so, the module
 138           will be called adm1026.
 139
 140 config SENSORS_ADM1029
 141         tristate "Analog Devices ADM1029"
 142         depends on I2C
 143         help
 144           If you say yes here you get support for Analog Devices ADM1029
 145           sensor chip.
 146           Very rare chip, please let us know you use it.
 147
 148           This driver can also be built as a module.  If so, the module
 149           will be called adm1029.
 150
 151 config SENSORS_ADM1031
 152         tristate "Analog Devices ADM1031 and compatibles"
 153         depends on I2C
 154         help
 155           If you say yes here you get support for Analog Devices ADM1031
 156           and ADM1030 sensor chips.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1031.
 160
 161 config SENSORS_ADM9240
 162         tristate "Analog Devices ADM9240 and compatibles"
 163         depends on I2C
 164         select HWMON_VID
 165         help
 166           If you say yes here you get support for Analog Devices ADM9240,
 167           Dallas DS1780, National Semiconductor LM81 sensor chips.
 168
 169           This driver can also be built as a module.  If so, the module
 170           will be called adm9240.
 171
 172 config SENSORS_ADT7411
 173         tristate "Analog Devices ADT7411"
 174         depends on I2C && EXPERIMENTAL
 175         help
 176           If you say yes here you get support for the Analog Devices
 177           ADT7411 voltage and temperature monitoring chip.
 178
 179           This driver can also be built as a module. If so, the module
 180           will be called adt7411.
 181
 182 config SENSORS_ADT7462
 183         tristate "Analog Devices ADT7462"
 184         depends on I2C && EXPERIMENTAL
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7462 temperature monitoring chips.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7462.
 191
 192 config SENSORS_ADT7470
 193         tristate "Analog Devices ADT7470"
 194         depends on I2C && EXPERIMENTAL
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7470 temperature monitoring chips.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7470.
 201
 202 config SENSORS_ADT7475
 203         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 204         depends on I2C
 205         select HWMON_VID
 206         help
 207           If you say yes here you get support for the Analog Devices
 208           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 209           chips.
 210
 211           This driver can also be build as a module.  If so, the module
 212           will be called adt7475.
 213
 214 config SENSORS_ASC7621
 215         tristate "Andigilog aSC7621"
 216         depends on I2C
 217         help
 218           If you say yes here you get support for the aSC7621
 219           family of SMBus sensors chip found on most Intel X38, X48, X58,
 220           945, 965 and 975 desktop boards.  Currently supported chips:
 221           aSC7621
 222           aSC7621a
 223
 224           This driver can also be built as a module.  If so, the module
 225           will be called asc7621.
 226
 227 config SENSORS_K8TEMP
 228         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 229         depends on X86 && PCI && EXPERIMENTAL
 230         help
 231           If you say yes here you get support for the temperature
 232           sensor(s) inside your CPU. Supported is whole AMD K8
 233           microarchitecture. Please note that you will need at least
 234           lm-sensors 2.10.1 for proper userspace support.
 235
 236           This driver can also be built as a module.  If so, the module
 237           will be called k8temp.
 238
 239 config SENSORS_K10TEMP
 240         tristate "AMD Family 10h+ temperature sensor"
 241         depends on X86 && PCI
 242         help
 243           If you say yes here you get support for the temperature
 244           sensor(s) inside your CPU. Supported are later revisions of
 245           the AMD Family 10h and all revisions of the AMD Family 11h,
 246           12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
 247
 248           This driver can also be built as a module.  If so, the module
 249           will be called k10temp.
 250
 251 config SENSORS_FAM15H_POWER
 252         tristate "AMD Family 15h processor power"
 253         depends on X86 && PCI
 254         help
 255           If you say yes here you get support for processor power
 256           information of your AMD family 15h CPU.
 257
 258           This driver can also be built as a module.  If so, the module
 259           will be called fam15h_power.
 260
 261 config SENSORS_ASB100
 262         tristate "Asus ASB100 Bach"
 263         depends on X86 && I2C && EXPERIMENTAL
 264         select HWMON_VID
 265         help
 266           If you say yes here you get support for the ASB100 Bach sensor
 267           chip found on some Asus mainboards.
 268
 269           This driver can also be built as a module.  If so, the module
 270           will be called asb100.
 271
 272 config SENSORS_ATXP1
 273         tristate "Attansic ATXP1 VID controller"
 274         depends on I2C && EXPERIMENTAL
 275         select HWMON_VID
 276         help
 277           If you say yes here you get support for the Attansic ATXP1 VID
 278           controller.
 279
 280           If your board have such a chip, you are able to control your CPU
 281           core and other voltages.
 282
 283           This driver can also be built as a module.  If so, the module
 284           will be called atxp1.
 285
 286 config SENSORS_DS620
 287         tristate "Dallas Semiconductor DS620"
 288         depends on I2C
 289         help
 290           If you say yes here you get support for Dallas Semiconductor
 291           DS620 sensor chip.
 292
 293           This driver can also be built as a module.  If so, the module
 294           will be called ds620.
 295
 296 config SENSORS_DS1621
 297         tristate "Dallas Semiconductor DS1621 and DS1625"
 298         depends on I2C
 299         help
 300           If you say yes here you get support for Dallas Semiconductor
 301           DS1621 and DS1625 sensor chips.
 302
 303           This driver can also be built as a module.  If so, the module
 304           will be called ds1621.
 305
 306 config SENSORS_I5K_AMB
 307         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 308         depends on PCI && EXPERIMENTAL
 309         help
 310           If you say yes here you get support for FB-DIMM AMB temperature
 311           monitoring chips on systems with the Intel 5000 series chipset.
 312
 313           This driver can also be built as a module. If so, the module
 314           will be called i5k_amb.
 315
 316 config SENSORS_F71805F
 317         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 318         help
 319           If you say yes here you get support for hardware monitoring
 320           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 321           Super-I/O chips.
 322
 323           This driver can also be built as a module.  If so, the module
 324           will be called f71805f.
 325
 326 config SENSORS_F71882FG
 327         tristate "Fintek F71882FG and compatibles"
 328         help
 329           If you say yes here you get support for hardware monitoring
 330           features of many Fintek Super-I/O (LPC) chips. The currently
 331           supported chips are:
 332             F71808E/A
 333             F71858FG
 334             F71862FG
 335             F71863FG
 336             F71869F/E/A
 337             F71882FG
 338             F71883FG
 339             F71889FG/ED/A
 340             F8000
 341             F81801U
 342             F81865F
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called f71882fg.
 346
 347 config SENSORS_F75375S
 348         tristate "Fintek F75375S/SP and F75373"
 349         depends on I2C
 350         help
 351           If you say yes here you get support for hardware monitoring
 352           features of the Fintek F75375S/SP and F75373
 353
 354           This driver can also be built as a module.  If so, the module
 355           will be called f75375s.
 356
 357 config SENSORS_FSCHMD
 358         tristate "Fujitsu Siemens Computers sensor chips"
 359         depends on X86 && I2C
 360         help
 361           If you say yes here you get support for the following Fujitsu
 362           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 363           Heimdall, Heracles, Hades and Syleus including support for the
 364           integrated watchdog.
 365
 366           This is a merged driver for FSC sensor chips replacing the fscpos,
 367           fscscy and fscher drivers and adding support for several other FSC
 368           sensor chips.
 369
 370           This driver can also be built as a module.  If so, the module
 371           will be called fschmd.
 372
 373 config SENSORS_G760A
 374         tristate "GMT G760A"
 375         depends on I2C
 376         help
 377           If you say yes here you get support for Global Mixed-mode
 378           Technology Inc G760A fan speed PWM controller chips.
 379
 380           This driver can also be built as a module.  If so, the module
 381           will be called g760a.
 382
 383 config SENSORS_GL518SM
 384         tristate "Genesys Logic GL518SM"
 385         depends on I2C
 386         help
 387           If you say yes here you get support for Genesys Logic GL518SM
 388           sensor chips.
 389
 390           This driver can also be built as a module.  If so, the module
 391           will be called gl518sm.
 392
 393 config SENSORS_GL520SM
 394         tristate "Genesys Logic GL520SM"
 395         depends on I2C
 396         select HWMON_VID
 397         help
 398           If you say yes here you get support for Genesys Logic GL520SM
 399           sensor chips.
 400
 401           This driver can also be built as a module.  If so, the module
 402           will be called gl520sm.
 403
 404 config SENSORS_GPIO_FAN
 405         tristate "GPIO fan"
 406         depends on GENERIC_GPIO
 407         help
 408           If you say yes here you get support for fans connected to GPIO lines.
 409
 410           This driver can also be built as a module.  If so, the module
 411           will be called gpio-fan.
 412
 413 config SENSORS_CORETEMP
 414         tristate "Intel Core/Core2/Atom temperature sensor"
 415         depends on X86 && PCI && EXPERIMENTAL
 416         help
 417           If you say yes here you get support for the temperature
 418           sensor inside your CPU. Most of the family 6 CPUs
 419           are supported. Check Documentation/hwmon/coretemp for details.
 420
 421 config SENSORS_IBMAEM
 422         tristate "IBM Active Energy Manager temperature/power sensors and control"
 423         select IPMI_SI
 424         depends on IPMI_HANDLER
 425         help
 426           If you say yes here you get support for the temperature and
 427           power sensors and capping hardware in various IBM System X
 428           servers that support Active Energy Manager.  This includes
 429           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 430           and certain HC10/HS2x/LS2x/QS2x blades.
 431
 432           This driver can also be built as a module.  If so, the module
 433           will be called ibmaem.
 434
 435 config SENSORS_IBMPEX
 436         tristate "IBM PowerExecutive temperature/power sensors"
 437         select IPMI_SI
 438         depends on IPMI_HANDLER
 439         help
 440           If you say yes here you get support for the temperature and
 441           power sensors in various IBM System X servers that support
 442           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 443           x3655, and x3755; the x3800, x3850, and x3950 models that have
 444           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 445
 446           This driver can also be built as a module.  If so, the module
 447           will be called ibmpex.
 448
 449 config SENSORS_IT87
 450         tristate "ITE IT87xx and compatibles"
 451         select HWMON_VID
 452         help
 453           If you say yes here you get support for ITE IT8705F, IT8712F,
 454           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
 455           chips, and the SiS960 clone.
 456
 457           This driver can also be built as a module.  If so, the module
 458           will be called it87.
 459
 460 config SENSORS_JZ4740
 461         tristate "Ingenic JZ4740 SoC ADC driver"
 462         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 463         help
 464           If you say yes here you get support for reading adc values from the ADCIN
 465           pin on Ingenic JZ4740 SoC based boards.
 466
 467           This driver can also be build as a module. If so, the module will be
 468           called jz4740-hwmon.
 469
 470 config SENSORS_JC42
 471         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 472         depends on I2C
 473         help
 474           If you say yes here, you get support for JEDEC JC42.4 compliant
 475           temperature sensors, which are used on many DDR3 memory modules for
 476           mobile devices and servers.  Support will include, but not be limited
 477           to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
 478           MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 479
 480           This driver can also be built as a module.  If so, the module
 481           will be called jc42.
 482
 483 config SENSORS_LINEAGE
 484         tristate "Lineage Compact Power Line Power Entry Module"
 485         depends on I2C && EXPERIMENTAL
 486         help
 487           If you say yes here you get support for the Lineage Compact Power Line
 488           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 489           CP2000DC, CP2725, and others.
 490
 491           This driver can also be built as a module.  If so, the module
 492           will be called lineage-pem.
 493
 494 config SENSORS_LM63
 495         tristate "National Semiconductor LM63 and LM64"
 496         depends on I2C
 497         help
 498           If you say yes here you get support for the National
 499           Semiconductor LM63 and LM64 remote diode digital temperature
 500           sensors with integrated fan control.  Such chips are found
 501           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 502           others.
 503
 504           This driver can also be built as a module.  If so, the module
 505           will be called lm63.
 506
 507 config SENSORS_LM70
 508         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 509         depends on SPI_MASTER
 510         help
 511           If you say yes here you get support for the National Semiconductor
 512           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 513           sensor chips.
 514
 515           This driver can also be built as a module.  If so, the module
 516           will be called lm70.
 517
 518 config SENSORS_LM73
 519         tristate "National Semiconductor LM73"
 520         depends on I2C
 521         help
 522           If you say yes here you get support for National Semiconductor LM73
 523           sensor chips.
 524           This driver can also be built as a module.  If so, the module
 525           will be called lm73.
 526
 527 config SENSORS_LM75
 528         tristate "National Semiconductor LM75 and compatibles"
 529         depends on I2C
 530         help
 531           If you say yes here you get support for one common type of
 532           temperature sensor chip, with models including:
 533
 534                 - Dallas Semiconductor DS75 and DS1775
 535                 - Maxim MAX6625 and MAX6626
 536                 - Microchip MCP980x
 537                 - National Semiconductor LM75, LM75A
 538                 - NXP's LM75A
 539                 - ST Microelectronics STDS75
 540                 - TelCom (now Microchip) TCN75
 541                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 542                   TMP275
 543
 544           This driver supports driver model based binding through board
 545           specific I2C device tables.
 546
 547           It also supports the "legacy" style of driver binding.  To use
 548           that with some chips which don't replicate LM75 quirks exactly,
 549           you may need the "force" module parameter.
 550
 551           This driver can also be built as a module.  If so, the module
 552           will be called lm75.
 553
 554 config SENSORS_LM77
 555         tristate "National Semiconductor LM77"
 556         depends on I2C
 557         help
 558           If you say yes here you get support for National Semiconductor LM77
 559           sensor chips.
 560
 561           This driver can also be built as a module.  If so, the module
 562           will be called lm77.
 563
 564 config SENSORS_LM78
 565         tristate "National Semiconductor LM78 and compatibles"
 566         depends on I2C
 567         select HWMON_VID
 568         help
 569           If you say yes here you get support for National Semiconductor LM78,
 570           LM78-J and LM79.
 571
 572           This driver can also be built as a module.  If so, the module
 573           will be called lm78.
 574
 575 config SENSORS_LM80
 576         tristate "National Semiconductor LM80"
 577         depends on I2C
 578         help
 579           If you say yes here you get support for National Semiconductor
 580           LM80 sensor chips.
 581
 582           This driver can also be built as a module.  If so, the module
 583           will be called lm80.
 584
 585 config SENSORS_LM83
 586         tristate "National Semiconductor LM83 and compatibles"
 587         depends on I2C
 588         help
 589           If you say yes here you get support for National Semiconductor
 590           LM82 and LM83 sensor chips.
 591
 592           This driver can also be built as a module.  If so, the module
 593           will be called lm83.
 594
 595 config SENSORS_LM85
 596         tristate "National Semiconductor LM85 and compatibles"
 597         depends on I2C
 598         select HWMON_VID
 599         help
 600           If you say yes here you get support for National Semiconductor LM85
 601           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 602           EMC6D101, EMC6D102, and EMC6D103.
 603
 604           This driver can also be built as a module.  If so, the module
 605           will be called lm85.
 606
 607 config SENSORS_LM87
 608         tristate "National Semiconductor LM87 and compatibles"
 609         depends on I2C
 610         select HWMON_VID
 611         help
 612           If you say yes here you get support for National Semiconductor LM87
 613           and Analog Devices ADM1024 sensor chips.
 614
 615           This driver can also be built as a module.  If so, the module
 616           will be called lm87.
 617
 618 config SENSORS_LM90
 619         tristate "National Semiconductor LM90 and compatibles"
 620         depends on I2C
 621         help
 622           If you say yes here you get support for National Semiconductor LM90,
 623           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 624           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 625           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 626           Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called lm90.
 630
 631 config SENSORS_LM92
 632         tristate "National Semiconductor LM92 and compatibles"
 633         depends on I2C
 634         help
 635           If you say yes here you get support for National Semiconductor LM92
 636           and Maxim MAX6635 sensor chips.
 637
 638           This driver can also be built as a module.  If so, the module
 639           will be called lm92.
 640
 641 config SENSORS_LM93
 642         tristate "National Semiconductor LM93 and compatibles"
 643         depends on I2C
 644         select HWMON_VID
 645         help
 646           If you say yes here you get support for National Semiconductor LM93,
 647           LM94, and compatible sensor chips.
 648
 649           This driver can also be built as a module.  If so, the module
 650           will be called lm93.
 651
 652 config SENSORS_LTC4151
 653         tristate "Linear Technology LTC4151"
 654         depends on I2C
 655         default n
 656         help
 657           If you say yes here you get support for Linear Technology LTC4151
 658           High Voltage I2C Current and Voltage Monitor interface.
 659
 660           This driver can also be built as a module. If so, the module will
 661           be called ltc4151.
 662
 663 config SENSORS_LTC4215
 664         tristate "Linear Technology LTC4215"
 665         depends on I2C && EXPERIMENTAL
 666         default n
 667         help
 668           If you say yes here you get support for Linear Technology LTC4215
 669           Hot Swap Controller I2C interface.
 670
 671           This driver can also be built as a module. If so, the module will
 672           be called ltc4215.
 673
 674 config SENSORS_LTC4245
 675         tristate "Linear Technology LTC4245"
 676         depends on I2C && EXPERIMENTAL
 677         default n
 678         help
 679           If you say yes here you get support for Linear Technology LTC4245
 680           Multiple Supply Hot Swap Controller I2C interface.
 681
 682           This driver can also be built as a module. If so, the module will
 683           be called ltc4245.
 684
 685 config SENSORS_LTC4261
 686         tristate "Linear Technology LTC4261"
 687         depends on I2C && EXPERIMENTAL
 688         default n
 689         help
 690           If you say yes here you get support for Linear Technology LTC4261
 691           Negative Voltage Hot Swap Controller I2C interface.
 692
 693           This driver can also be built as a module. If so, the module will
 694           be called ltc4261.
 695
 696 config SENSORS_LM95241
 697         tristate "National Semiconductor LM95241 and compatibles"
 698         depends on I2C
 699         help
 700           If you say yes here you get support for LM95231 and LM95241 sensor
 701           chips.
 702
 703           This driver can also be built as a module.  If so, the module
 704           will be called lm95241.
 705
 706 config SENSORS_LM95245
 707         tristate "National Semiconductor LM95245 sensor chip"
 708         depends on I2C && EXPERIMENTAL
 709         help
 710           If you say yes here you get support for LM95245 sensor chip.
 711
 712           This driver can also be built as a module.  If so, the module
 713           will be called lm95245.
 714
 715 config SENSORS_MAX1111
 716         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 717         depends on SPI_MASTER
 718         help
 719           Say y here to support Maxim's MAX1111 ADC chips.
 720
 721           This driver can also be built as a module.  If so, the module
 722           will be called max1111.
 723
 724 config SENSORS_MAX16065
 725         tristate "Maxim MAX16065 System Manager and compatibles"
 726         depends on I2C
 727         help
 728           If you say yes here you get support for hardware monitoring
 729           capabilities of the following Maxim System Manager chips.
 730             MAX16065
 731             MAX16066
 732             MAX16067
 733             MAX16068
 734             MAX16070
 735             MAX16071
 736
 737           This driver can also be built as a module.  If so, the module
 738           will be called max16065.
 739
 740 config SENSORS_MAX1619
 741         tristate "Maxim MAX1619 sensor chip"
 742         depends on I2C
 743         help
 744           If you say yes here you get support for MAX1619 sensor chip.
 745
 746           This driver can also be built as a module.  If so, the module
 747           will be called max1619.
 748
 749 config SENSORS_MAX1668
 750         tristate "Maxim MAX1668 and compatibles"
 751         depends on I2C && EXPERIMENTAL
 752         help
 753           If you say yes here you get support for MAX1668, MAX1989 and
 754           MAX1805 chips.
 755
 756           This driver can also be built as a module.  If so, the module
 757           will be called max1668.
 758
 759 config SENSORS_MAX6639
 760         tristate "Maxim MAX6639 sensor chip"
 761         depends on I2C && EXPERIMENTAL
 762         help
 763           If you say yes here you get support for the MAX6639
 764           sensor chips.
 765
 766           This driver can also be built as a module.  If so, the module
 767           will be called max6639.
 768
 769 config SENSORS_MAX6642
 770         tristate "Maxim MAX6642 sensor chip"
 771         depends on I2C && EXPERIMENTAL
 772         help
 773           If you say yes here you get support for MAX6642 sensor chip.
 774           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 775           with Overtemperature Alarm from Maxim.
 776
 777           This driver can also be built as a module.  If so, the module
 778           will be called max6642.
 779
 780 config SENSORS_MAX6650
 781         tristate "Maxim MAX6650 sensor chip"
 782         depends on I2C && EXPERIMENTAL
 783         help
 784           If you say yes here you get support for the MAX6650 / MAX6651
 785           sensor chips.
 786
 787           This driver can also be built as a module.  If so, the module
 788           will be called max6650.
 789
 790 config SENSORS_NTC_THERMISTOR
 791         tristate "NTC thermistor support"
 792         depends on EXPERIMENTAL
 793         help
 794           This driver supports NTC thermistors sensor reading and its
 795           interpretation. The driver can also monitor the temperature and
 796           send notifications about the temperature.
 797
 798           Currently, this driver supports
 799           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 800
 801           This driver can also be built as a module.  If so, the module
 802           will be called ntc-thermistor.
 803
 804 config SENSORS_PC87360
 805         tristate "National Semiconductor PC87360 family"
 806         select HWMON_VID
 807         help
 808           If you say yes here you get access to the hardware monitoring
 809           functions of the National Semiconductor PC8736x Super-I/O chips.
 810           The PC87360, PC87363 and PC87364 only have fan monitoring and
 811           control.  The PC87365 and PC87366 additionally have voltage and
 812           temperature monitoring.
 813
 814           This driver can also be built as a module.  If so, the module
 815           will be called pc87360.
 816
 817 config SENSORS_PC87427
 818         tristate "National Semiconductor PC87427"
 819         help
 820           If you say yes here you get access to the hardware monitoring
 821           functions of the National Semiconductor PC87427 Super-I/O chip.
 822           The chip has two distinct logical devices, one for fan speed
 823           monitoring and control, and one for voltage and temperature
 824           monitoring. Fan speed monitoring and control are supported, as
 825           well as temperature monitoring. Voltages aren't supported yet.
 826
 827           This driver can also be built as a module.  If so, the module
 828           will be called pc87427.
 829
 830 config SENSORS_PCF8591
 831         tristate "Philips PCF8591 ADC/DAC"
 832         depends on I2C
 833         default n
 834         help
 835           If you say yes here you get support for Philips PCF8591 4-channel
 836           ADC, 1-channel DAC chips.
 837
 838           This driver can also be built as a module.  If so, the module
 839           will be called pcf8591.
 840
 841           These devices are hard to detect and rarely found on mainstream
 842           hardware.  If unsure, say N.
 843
 844 source drivers/hwmon/pmbus/Kconfig
 845
 846 config SENSORS_SHT15
 847         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 848         depends on GENERIC_GPIO
 849         help
 850           If you say yes here you get support for the Sensiron SHT10, SHT11,
 851           SHT15, SHT71, SHT75 humidity and temperature sensors.
 852
 853           This driver can also be built as a module.  If so, the module
 854           will be called sht15.
 855
 856 config SENSORS_SHT21
 857         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 858         depends on I2C
 859         help
 860           If you say yes here you get support for the Sensiron SHT21, SHT25
 861           humidity and temperature sensors.
 862
 863           This driver can also be built as a module.  If so, the module
 864           will be called sht21.
 865
 866 config SENSORS_S3C
 867         tristate "Samsung built-in ADC"
 868         depends on S3C_ADC
 869         help
 870           If you say yes here you get support for the on-board ADCs of
 871           the Samsung S3C24XX, S3C64XX and other series of SoC
 872
 873           This driver can also be built as a module. If so, the module
 874           will be called s3c-hwmon.
 875
 876 config SENSORS_S3C_RAW
 877         bool "Include raw channel attributes in sysfs"
 878         depends on SENSORS_S3C
 879         help
 880           Say Y here if you want to include raw copies of all the ADC
 881           channels in sysfs.
 882
 883 config SENSORS_SIS5595
 884         tristate "Silicon Integrated Systems Corp. SiS5595"
 885         depends on PCI
 886         help
 887           If you say yes here you get support for the integrated sensors in
 888           SiS5595 South Bridges.
 889
 890           This driver can also be built as a module.  If so, the module
 891           will be called sis5595.
 892
 893 config SENSORS_SMM665
 894         tristate "Summit Microelectronics SMM665"
 895         depends on I2C && EXPERIMENTAL
 896         default n
 897         help
 898           If you say yes here you get support for the hardware monitoring
 899           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 900           Active DC Output Controller / Monitor.
 901
 902           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 903           Support for those chips is untested.
 904
 905           This driver can also be built as a module. If so, the module will
 906           be called smm665.
 907
 908 config SENSORS_DME1737
 909         tristate "SMSC DME1737, SCH311x and compatibles"
 910         depends on I2C && EXPERIMENTAL
 911         select HWMON_VID
 912         help
 913           If you say yes here you get support for the hardware monitoring
 914           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 915           Asus A8000 Super-I/O chips.
 916
 917           This driver can also be built as a module.  If so, the module
 918           will be called dme1737.
 919
 920 config SENSORS_EMC1403
 921         tristate "SMSC EMC1403/23 thermal sensor"
 922         depends on I2C
 923         help
 924           If you say yes here you get support for the SMSC EMC1403/23
 925           temperature monitoring chip.
 926
 927           Threshold values can be configured using sysfs.
 928           Data from the different diodes are accessible via sysfs.
 929
 930 config SENSORS_EMC2103
 931         tristate "SMSC EMC2103"
 932         depends on I2C
 933         help
 934           If you say yes here you get support for the temperature
 935           and fan sensors of the SMSC EMC2103 chips.
 936
 937           This driver can also be built as a module.  If so, the module
 938           will be called emc2103.
 939
 940 config SENSORS_EMC6W201
 941         tristate "SMSC EMC6W201"
 942         depends on I2C
 943         help
 944           If you say yes here you get support for the SMSC EMC6W201
 945           hardware monitoring chip.
 946
 947           This driver can also be built as a module.  If so, the module
 948           will be called emc6w201.
 949
 950 config SENSORS_SMSC47M1
 951         tristate "SMSC LPC47M10x and compatibles"
 952         help
 953           If you say yes here you get support for the integrated fan
 954           monitoring and control capabilities of the SMSC LPC47B27x,
 955           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 956           LPC47M192, LPC47M292 and LPC47M997 chips.
 957
 958           The temperature and voltage sensor features of the LPC47M15x,
 959           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 960           driver, select also "SMSC LPC47M192 and compatibles" below for
 961           those.
 962
 963           This driver can also be built as a module.  If so, the module
 964           will be called smsc47m1.
 965
 966 config SENSORS_SMSC47M192
 967         tristate "SMSC LPC47M192 and compatibles"
 968         depends on I2C
 969         select HWMON_VID
 970         help
 971           If you say yes here you get support for the temperature and
 972           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 973           and LPC47M997 chips.
 974
 975           The fan monitoring and control capabilities of these chips
 976           are supported by another driver, select
 977           "SMSC LPC47M10x and compatibles" above. You need both drivers
 978           if you want fan control and voltage/temperature sensor support.
 979
 980           This driver can also be built as a module.  If so, the module
 981           will be called smsc47m192.
 982
 983 config SENSORS_SMSC47B397
 984         tristate "SMSC LPC47B397-NC"
 985         depends on EXPERIMENTAL
 986         help
 987           If you say yes here you get support for the SMSC LPC47B397-NC
 988           sensor chip.
 989
 990           This driver can also be built as a module.  If so, the module
 991           will be called smsc47b397.
 992
 993 config SENSORS_SCH56XX_COMMON
 994         tristate
 995         default n
 996
 997 config SENSORS_SCH5627
 998         tristate "SMSC SCH5627"
 999         select SENSORS_SCH56XX_COMMON
1000         help
1001           If you say yes here you get support for the hardware monitoring
1002           features of the SMSC SCH5627 Super-I/O chip.
1003
1004           This driver can also be built as a module.  If so, the module
1005           will be called sch5627.
1006
1007 config SENSORS_SCH5636
1008         tristate "SMSC SCH5636"
1009         select SENSORS_SCH56XX_COMMON
1010         help
1011           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1012           hardware monitoring solutions, allowing motherboard manufacturers to
1013           create their own custom hwmon solution based upon the SCH5636.
1014
1015           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1016           hwmon solution. Say yes here if you want support for the Fujitsu
1017           Theseus' hardware monitoring features.
1018
1019           This driver can also be built as a module.  If so, the module
1020           will be called sch5636.
1021
1022 config SENSORS_ADS1015
1023         tristate "Texas Instruments ADS1015"
1024         depends on I2C
1025         help
1026           If you say yes here you get support for Texas Instruments ADS1015
1027           12-bit 4-input ADC device.
1028
1029           This driver can also be built as a module.  If so, the module
1030           will be called ads1015.
1031
1032 config SENSORS_ADS7828
1033         tristate "Texas Instruments ADS7828"
1034         depends on I2C
1035         help
1036           If you say yes here you get support for Texas Instruments ADS7828
1037           12-bit 8-channel ADC device.
1038
1039           This driver can also be built as a module.  If so, the module
1040           will be called ads7828.
1041
1042 config SENSORS_ADS7871
1043         tristate "Texas Instruments ADS7871 A/D converter"
1044         depends on SPI
1045         help
1046           If you say yes here you get support for TI ADS7871 & ADS7870
1047
1048           This driver can also be built as a module.  If so, the module
1049           will be called ads7871.
1050
1051 config SENSORS_AMC6821
1052         tristate "Texas Instruments AMC6821"
1053         depends on I2C  && EXPERIMENTAL
1054         help
1055           If you say yes here you get support for the Texas Instruments
1056           AMC6821 hardware monitoring chips.
1057
1058           This driver can also be build as a module.  If so, the module
1059           will be called amc6821.
1060
1061 config SENSORS_THMC50
1062         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1063         depends on I2C
1064         help
1065           If you say yes here you get support for Texas Instruments THMC50
1066           sensor chips and clones: the Analog Devices ADM1022.
1067
1068           This driver can also be built as a module.  If so, the module
1069           will be called thmc50.
1070
1071 config SENSORS_TMP102
1072         tristate "Texas Instruments TMP102"
1073         depends on I2C && EXPERIMENTAL
1074         help
1075           If you say yes here you get support for Texas Instruments TMP102
1076           sensor chips.
1077
1078           This driver can also be built as a module.  If so, the module
1079           will be called tmp102.
1080
1081 config SENSORS_TMP401
1082         tristate "Texas Instruments TMP401 and compatibles"
1083         depends on I2C && EXPERIMENTAL
1084         help
1085           If you say yes here you get support for Texas Instruments TMP401 and
1086           TMP411 temperature sensor chips.
1087
1088           This driver can also be built as a module.  If so, the module
1089           will be called tmp401.
1090
1091 config SENSORS_TMP421
1092         tristate "Texas Instruments TMP421 and compatible"
1093         depends on I2C && EXPERIMENTAL
1094         help
1095           If you say yes here you get support for Texas Instruments TMP421,
1096           TMP422 and TMP423 temperature sensor chips.
1097
1098           This driver can also be built as a module.  If so, the module
1099           will be called tmp421.
1100
1101 config SENSORS_TWL4030_MADC
1102         tristate "Texas Instruments TWL4030 MADC Hwmon"
1103         depends on TWL4030_MADC
1104         help
1105         If you say yes here you get hwmon support for triton
1106         TWL4030-MADC.
1107
1108         This driver can also be built as a module. If so it will be called
1109         twl4030-madc-hwmon.
1110
1111 config SENSORS_VIA_CPUTEMP
1112         tristate "VIA CPU temperature sensor"
1113         depends on X86
1114         select HWMON_VID
1115         help
1116           If you say yes here you get support for the temperature
1117           sensor inside your CPU. Supported are all known variants of
1118           the VIA C7 and Nano.
1119
1120 config SENSORS_VIA686A
1121         tristate "VIA686A"
1122         depends on PCI
1123         help
1124           If you say yes here you get support for the integrated sensors in
1125           Via 686A/B South Bridges.
1126
1127           This driver can also be built as a module.  If so, the module
1128           will be called via686a.
1129
1130 config SENSORS_VT1211
1131         tristate "VIA VT1211"
1132         select HWMON_VID
1133         help
1134           If you say yes here then you get support for hardware monitoring
1135           features of the VIA VT1211 Super-I/O chip.
1136
1137           This driver can also be built as a module.  If so, the module
1138           will be called vt1211.
1139
1140 config SENSORS_VT8231
1141         tristate "VIA VT8231"
1142         depends on PCI
1143         select HWMON_VID
1144         help
1145           If you say yes here then you get support for the integrated sensors
1146           in the VIA VT8231 device.
1147
1148           This driver can also be built as a module.  If so, the module
1149           will be called vt8231.
1150
1151 config SENSORS_W83781D
1152         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1153         depends on I2C
1154         select HWMON_VID
1155         help
1156           If you say yes here you get support for the Winbond W8378x series
1157           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1158           Asus AS99127F.
1159
1160           This driver can also be built as a module.  If so, the module
1161           will be called w83781d.
1162
1163 config SENSORS_W83791D
1164         tristate "Winbond W83791D"
1165         depends on I2C
1166         select HWMON_VID
1167         help
1168           If you say yes here you get support for the Winbond W83791D chip.
1169
1170           This driver can also be built as a module.  If so, the module
1171           will be called w83791d.
1172
1173 config SENSORS_W83792D
1174         tristate "Winbond W83792D"
1175         depends on I2C
1176         help
1177           If you say yes here you get support for the Winbond W83792D chip.
1178
1179           This driver can also be built as a module.  If so, the module
1180           will be called w83792d.
1181
1182 config SENSORS_W83793
1183         tristate "Winbond W83793"
1184         depends on I2C && EXPERIMENTAL
1185         select HWMON_VID
1186         help
1187           If you say yes here you get support for the Winbond W83793
1188           hardware monitoring chip, including support for the integrated
1189           watchdog.
1190
1191           This driver can also be built as a module.  If so, the module
1192           will be called w83793.
1193
1194 config SENSORS_W83795
1195         tristate "Winbond/Nuvoton W83795G/ADG"
1196         depends on I2C && EXPERIMENTAL
1197         help
1198           If you say yes here you get support for the Winbond W83795G and
1199           W83795ADG hardware monitoring chip.
1200
1201           This driver can also be built as a module.  If so, the module
1202           will be called w83795.
1203
1204 config SENSORS_W83795_FANCTRL
1205         boolean "Include fan control support (DANGEROUS)"
1206         depends on SENSORS_W83795 && EXPERIMENTAL
1207         default n
1208         help
1209           If you say yes here, support for the both manual and automatic
1210           fan control features will be included in the driver.
1211
1212           This part of the code wasn't carefully reviewed and tested yet,
1213           so enabling this option is strongly discouraged on production
1214           servers. Only developers and testers should enable it for the
1215           time being.
1216
1217           Please also note that this option will create sysfs attribute
1218           files which may change in the future, so you shouldn't rely
1219           on them being stable.
1220
1221 config SENSORS_W83L785TS
1222         tristate "Winbond W83L785TS-S"
1223         depends on I2C && EXPERIMENTAL
1224         help
1225           If you say yes here you get support for the Winbond W83L785TS-S
1226           sensor chip, which is used on the Asus A7N8X, among other
1227           motherboards.
1228
1229           This driver can also be built as a module.  If so, the module
1230           will be called w83l785ts.
1231
1232 config SENSORS_W83L786NG
1233         tristate "Winbond W83L786NG, W83L786NR"
1234         depends on I2C && EXPERIMENTAL
1235         help
1236           If you say yes here you get support for the Winbond W83L786NG
1237           and W83L786NR sensor chips.
1238
1239           This driver can also be built as a module.  If so, the module
1240           will be called w83l786ng.
1241
1242 config SENSORS_W83627HF
1243         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1244         select HWMON_VID
1245         help
1246           If you say yes here you get support for the Winbond W836X7 series
1247           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1248           W83697HF.
1249
1250           This driver can also be built as a module.  If so, the module
1251           will be called w83627hf.
1252
1253 config SENSORS_W83627EHF
1254         tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1255         select HWMON_VID
1256         help
1257           If you say yes here you get support for the hardware
1258           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1259
1260           This driver also supports the W83627EHG, which is the lead-free
1261           version of the W83627EHF, and the W83627DHG, which is a similar
1262           chip suited for specific Intel processors that use PECI such as
1263           the Core 2 Duo.
1264
1265           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1266           (also known as W83667HG-I), and NCT6776F.
1267
1268           This driver can also be built as a module.  If so, the module
1269           will be called w83627ehf.
1270
1271 config SENSORS_WM831X
1272         tristate "WM831x PMICs"
1273         depends on MFD_WM831X
1274         help
1275           If you say yes here you get support for the hardware
1276           monitoring functionality of the Wolfson Microelectronics
1277           WM831x series of PMICs.
1278
1279           This driver can also be built as a module.  If so, the module
1280           will be called wm831x-hwmon.
1281
1282 config SENSORS_WM8350
1283         tristate "Wolfson Microelectronics WM835x"
1284         depends on MFD_WM8350
1285         help
1286           If you say yes here you get support for the hardware
1287           monitoring features of the WM835x series of PMICs.
1288
1289           This driver can also be built as a module.  If so, the module
1290           will be called wm8350-hwmon.
1291
1292 config SENSORS_ULTRA45
1293         tristate "Sun Ultra45 PIC16F747"
1294         depends on SPARC64
1295         help
1296           This driver provides support for the Ultra45 workstation environmental
1297           sensors.
1298
1299 config SENSORS_APPLESMC
1300         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1301         depends on INPUT && X86
1302         select NEW_LEDS
1303         select LEDS_CLASS
1304         select INPUT_POLLDEV
1305         default n
1306         help
1307           This driver provides support for the Apple System Management
1308           Controller, which provides an accelerometer (Apple Sudden Motion
1309           Sensor), light sensors, temperature sensors, keyboard backlight
1310           control and fan control.
1311
1312           Only Intel-based Apple's computers are supported (MacBook Pro,
1313           MacBook, MacMini).
1314
1315           Data from the different sensors, keyboard backlight control and fan
1316           control are accessible via sysfs.
1317
1318           This driver also provides an absolute input class device, allowing
1319           the laptop to act as a pinball machine-esque joystick.
1320
1321           Say Y here if you have an applicable laptop and want to experience
1322           the awesome power of applesmc.
1323
1324 config SENSORS_MC13783_ADC
1325         tristate "Freescale MC13783 ADC"
1326         depends on MFD_MC13783
1327         help
1328           Support for the A/D converter on MC13783 PMIC.
1329
1330 if ACPI
1331
1332 comment "ACPI drivers"
1333
1334 config SENSORS_ACPI_POWER
1335         tristate "ACPI 4.0 power meter"
1336         help
1337           This driver exposes ACPI 4.0 power meters as hardware monitoring
1338           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1339           and a power meter.
1340
1341           To compile this driver as a module, choose M here:
1342           the module will be called acpi_power_meter.
1343
1344 config SENSORS_ATK0110
1345         tristate "ASUS ATK0110"
1346         depends on X86 && EXPERIMENTAL
1347         help
1348           If you say yes here you get support for the ACPI hardware
1349           monitoring interface found in many ASUS motherboards. This
1350           driver will provide readings of fans, voltages and temperatures
1351           through the system firmware.
1352
1353           This driver can also be built as a module. If so, the module
1354           will be called asus_atk0110.
1355
1356 endif # ACPI
1357
1358 endif # HWMON