drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config SENSORS_ABITUGURU
  32         tristate "Abit uGuru (rev 1 & 2)"
  33         depends on X86 && EXPERIMENTAL
  34         help
  35           If you say yes here you get support for the sensor part of the first
  36           and second revision of the Abit uGuru chip. The voltage and frequency
  37           control parts of the Abit uGuru are not supported. The Abit uGuru
  38           chip can be found on Abit uGuru featuring motherboards (most modern
  39           Abit motherboards from before end 2005). For more info and a list
  40           of which motherboards have which revision see
  41           Documentation/hwmon/abituguru
  42
  43           This driver can also be built as a module.  If so, the module
  44           will be called abituguru.
  45
  46 config SENSORS_ABITUGURU3
  47         tristate "Abit uGuru (rev 3)"
  48         depends on X86 && EXPERIMENTAL
  49         help
  50           If you say yes here you get support for the sensor part of the
  51           third revision of the Abit uGuru chip. Only reading the sensors
  52           and their settings is supported. The third revision of the Abit
  53           uGuru chip can be found on recent Abit motherboards (since end
  54           2005). For more info and a list of which motherboards have which
  55           revision see Documentation/hwmon/abituguru3
  56
  57           This driver can also be built as a module.  If so, the module
  58           will be called abituguru3.
  59
  60 config SENSORS_AD7418
  61         tristate "Analog Devices AD7416, AD7417 and AD7418"
  62         depends on I2C && EXPERIMENTAL
  63         help
  64           If you say yes here you get support for the Analog Devices
  65           AD7416, AD7417 and AD7418 temperature monitoring chips.
  66
  67           This driver can also be built as a module. If so, the module
  68           will be called ad7418.
  69
  70 config SENSORS_ADM1021
  71         tristate "Analog Devices ADM1021 and compatibles"
  72         depends on I2C
  73         help
  74           If you say yes here you get support for Analog Devices ADM1021
  75           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  76           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  77           and the XEON processor built-in sensor.
  78
  79           This driver can also be built as a module.  If so, the module
  80           will be called adm1021.
  81
  82 config SENSORS_ADM1025
  83         tristate "Analog Devices ADM1025 and compatibles"
  84         depends on I2C
  85         select HWMON_VID
  86         help
  87           If you say yes here you get support for Analog Devices ADM1025
  88           and Philips NE1619 sensor chips.
  89
  90           This driver can also be built as a module.  If so, the module
  91           will be called adm1025.
  92
  93 config SENSORS_ADM1026
  94         tristate "Analog Devices ADM1026 and compatibles"
  95         depends on I2C && EXPERIMENTAL
  96         select HWMON_VID
  97         help
  98           If you say yes here you get support for Analog Devices ADM1026
  99           sensor chip.
 100
 101           This driver can also be built as a module.  If so, the module
 102           will be called adm1026.
 103
 104 config SENSORS_ADM1029
 105         tristate "Analog Devices ADM1029"
 106         depends on I2C && EXPERIMENTAL
 107         help
 108           If you say yes here you get support for Analog Devices ADM1029
 109           sensor chip.
 110           Very rare chip, please let us know you use it.
 111
 112           This driver can also be built as a module.  If so, the module
 113           will be called adm1029.
 114
 115 config SENSORS_ADM1031
 116         tristate "Analog Devices ADM1031 and compatibles"
 117         depends on I2C && EXPERIMENTAL
 118         help
 119           If you say yes here you get support for Analog Devices ADM1031
 120           and ADM1030 sensor chips.
 121
 122           This driver can also be built as a module.  If so, the module
 123           will be called adm1031.
 124
 125 config SENSORS_ADM9240
 126         tristate "Analog Devices ADM9240 and compatibles"
 127         depends on I2C && EXPERIMENTAL
 128         select HWMON_VID
 129         help
 130           If you say yes here you get support for Analog Devices ADM9240,
 131           Dallas DS1780, National Semiconductor LM81 sensor chips.
 132
 133           This driver can also be built as a module.  If so, the module
 134           will be called adm9240.
 135
 136 config SENSORS_ADT7470
 137         tristate "Analog Devices ADT7470"
 138         depends on I2C && EXPERIMENTAL
 139         help
 140           If you say yes here you get support for the Analog Devices
 141           ADT7470 temperature monitoring chips.
 142
 143           This driver can also be built as a module. If so, the module
 144           will be called adt7470.
 145
 146 config SENSORS_ADT7473
 147         tristate "Analog Devices ADT7473"
 148         depends on I2C && EXPERIMENTAL
 149         help
 150           If you say yes here you get support for the Analog Devices
 151           ADT7473 temperature monitoring chips.
 152
 153           This driver can also be built as a module. If so, the module
 154           will be called adt7473.
 155
 156 config SENSORS_K8TEMP
 157         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 158         depends on X86 && PCI && EXPERIMENTAL
 159         help
 160           If you say yes here you get support for the temperature
 161           sensor(s) inside your CPU. Supported is whole AMD K8
 162           microarchitecture. Please note that you will need at least
 163           lm-sensors 2.10.1 for proper userspace support.
 164
 165           This driver can also be built as a module.  If so, the module
 166           will be called k8temp.
 167
 168 config SENSORS_AMS
 169         tristate "Apple Motion Sensor driver"
 170         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 171         select INPUT_POLLDEV
 172         help
 173           Support for the motion sensor included in PowerBooks. Includes
 174           implementations for PMU and I2C.
 175
 176           This driver can also be built as a module. If so, the module
 177           will be called ams.
 178
 179 config SENSORS_AMS_PMU
 180         bool "PMU variant"
 181         depends on SENSORS_AMS && ADB_PMU
 182         default y
 183         help
 184           PMU variant of motion sensor, found in late 2005 PowerBooks.
 185
 186 config SENSORS_AMS_I2C
 187         bool "I2C variant"
 188         depends on SENSORS_AMS && I2C
 189         default y
 190         help
 191           I2C variant of motion sensor, found in early 2005 PowerBooks and
 192           iBooks.
 193
 194 config SENSORS_ASB100
 195         tristate "Asus ASB100 Bach"
 196         depends on X86 && I2C && EXPERIMENTAL
 197         select HWMON_VID
 198         help
 199           If you say yes here you get support for the ASB100 Bach sensor
 200           chip found on some Asus mainboards.
 201
 202           This driver can also be built as a module.  If so, the module
 203           will be called asb100.
 204
 205 config SENSORS_ATXP1
 206         tristate "Attansic ATXP1 VID controller"
 207         depends on I2C && EXPERIMENTAL
 208         select HWMON_VID
 209         help
 210           If you say yes here you get support for the Attansic ATXP1 VID
 211           controller.
 212
 213           If your board have such a chip, you are able to control your CPU
 214           core and other voltages.
 215
 216           This driver can also be built as a module.  If so, the module
 217           will be called atxp1.
 218
 219 config SENSORS_DS1621
 220         tristate "Dallas Semiconductor DS1621 and DS1625"
 221         depends on I2C
 222         help
 223           If you say yes here you get support for Dallas Semiconductor
 224           DS1621 and DS1625 sensor chips.
 225
 226           This driver can also be built as a module.  If so, the module
 227           will be called ds1621.
 228
 229 config SENSORS_I5K_AMB
 230         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 231         depends on PCI && EXPERIMENTAL
 232         help
 233           If you say yes here you get support for FB-DIMM AMB temperature
 234           monitoring chips on systems with the Intel 5000 series chipset.
 235
 236           This driver can also be built as a module. If so, the module
 237           will be called i5k_amb.
 238
 239 config SENSORS_F71805F
 240         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 241         depends on EXPERIMENTAL
 242         help
 243           If you say yes here you get support for hardware monitoring
 244           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 245           Super-I/O chips.
 246
 247           This driver can also be built as a module.  If so, the module
 248           will be called f71805f.
 249
 250 config SENSORS_F71882FG
 251         tristate "Fintek F71882FG and F71883FG"
 252         depends on EXPERIMENTAL
 253         help
 254           If you say yes here you get support for hardware monitoring
 255           features of the Fintek F71882FG and F71883FG Super-I/O chips.
 256
 257           This driver can also be built as a module.  If so, the module
 258           will be called f71882fg.
 259
 260 config SENSORS_F75375S
 261         tristate "Fintek F75375S/SP and F75373";
 262         depends on I2C && EXPERIMENTAL
 263         help
 264           If you say yes here you get support for hardware monitoring
 265           features of the Fintek F75375S/SP and F75373
 266
 267           This driver can also be built as a module.  If so, the module
 268           will be called f75375s.
 269
 270 config SENSORS_FSCHER
 271         tristate "FSC Hermes"
 272         depends on X86 && I2C
 273         help
 274           If you say yes here you get support for Fujitsu Siemens
 275           Computers Hermes sensor chips.
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called fscher.
 279
 280 config SENSORS_FSCPOS
 281         tristate "FSC Poseidon"
 282         depends on X86 && I2C
 283         help
 284           If you say yes here you get support for Fujitsu Siemens
 285           Computers Poseidon sensor chips.
 286
 287           This driver can also be built as a module.  If so, the module
 288           will be called fscpos.
 289
 290 config SENSORS_FSCHMD
 291         tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
 292         depends on X86 && I2C && EXPERIMENTAL
 293         help
 294           If you say yes here you get support for various Fujitsu Siemens
 295           Computers sensor chips.
 296
 297           This is a new merged driver for FSC sensor chips which is intended
 298           as a replacment for the fscpos, fscscy and fscher drivers and adds
 299           support for several other FCS sensor chips.
 300
 301           This driver can also be built as a module.  If so, the module
 302           will be called fschmd.
 303
 304 config SENSORS_GL518SM
 305         tristate "Genesys Logic GL518SM"
 306         depends on I2C
 307         help
 308           If you say yes here you get support for Genesys Logic GL518SM
 309           sensor chips.
 310
 311           This driver can also be built as a module.  If so, the module
 312           will be called gl518sm.
 313
 314 config SENSORS_GL520SM
 315         tristate "Genesys Logic GL520SM"
 316         depends on I2C
 317         select HWMON_VID
 318         help
 319           If you say yes here you get support for Genesys Logic GL520SM
 320           sensor chips.
 321
 322           This driver can also be built as a module.  If so, the module
 323           will be called gl520sm.
 324
 325 config SENSORS_CORETEMP
 326         tristate "Intel Core (2) Duo/Solo temperature sensor"
 327         depends on X86 && EXPERIMENTAL
 328         help
 329           If you say yes here you get support for the temperature
 330           sensor inside your CPU. Supported all are all known variants
 331           of Intel Core family.
 332
 333 config SENSORS_IBMPEX
 334         tristate "IBM PowerExecutive temperature/power sensors"
 335         select IPMI_SI
 336         depends on IPMI_HANDLER
 337         help
 338           If you say yes here you get support for the temperature and
 339           power sensors in various IBM System X servers that support
 340           PowerExecutive.  So far this includes the x3550, x3650, x3655,
 341           x3755, and certain HS20 blades.
 342
 343           This driver can also be built as a module.  If so, the module
 344           will be called ibmpex.
 345
 346 config SENSORS_IT87
 347         tristate "ITE IT87xx and compatibles"
 348         select HWMON_VID
 349         help
 350           If you say yes here you get support for ITE IT8705F, IT8712F,
 351           IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
 352
 353           This driver can also be built as a module.  If so, the module
 354           will be called it87.
 355
 356 config SENSORS_LM63
 357         tristate "National Semiconductor LM63"
 358         depends on I2C
 359         help
 360           If you say yes here you get support for the National Semiconductor
 361           LM63 remote diode digital temperature sensor with integrated fan
 362           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 363           motherboard, among others.
 364
 365           This driver can also be built as a module.  If so, the module
 366           will be called lm63.
 367
 368 config SENSORS_LM70
 369         tristate "National Semiconductor LM70"
 370         depends on SPI_MASTER && EXPERIMENTAL
 371         help
 372           If you say yes here you get support for the National Semiconductor
 373           LM70 digital temperature sensor chip.
 374
 375           This driver can also be built as a module.  If so, the module
 376           will be called lm70.
 377
 378 config SENSORS_LM75
 379         tristate "National Semiconductor LM75 and compatibles"
 380         depends on I2C
 381         help
 382           If you say yes here you get support for National Semiconductor LM75
 383           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 384           9-bit precision mode), and TelCom (now Microchip) TCN75.
 385
 386           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 387           a force module parameter. The driver will not handle the extra
 388           precision anyhow.
 389
 390           This driver can also be built as a module.  If so, the module
 391           will be called lm75.
 392
 393 config SENSORS_LM77
 394         tristate "National Semiconductor LM77"
 395         depends on I2C
 396         help
 397           If you say yes here you get support for National Semiconductor LM77
 398           sensor chips.
 399
 400           This driver can also be built as a module.  If so, the module
 401           will be called lm77.
 402
 403 config SENSORS_LM78
 404         tristate "National Semiconductor LM78 and compatibles"
 405         depends on I2C
 406         select HWMON_VID
 407         help
 408           If you say yes here you get support for National Semiconductor LM78,
 409           LM78-J and LM79.
 410
 411           This driver can also be built as a module.  If so, the module
 412           will be called lm78.
 413
 414 config SENSORS_LM80
 415         tristate "National Semiconductor LM80"
 416         depends on I2C && EXPERIMENTAL
 417         help
 418           If you say yes here you get support for National Semiconductor
 419           LM80 sensor chips.
 420
 421           This driver can also be built as a module.  If so, the module
 422           will be called lm80.
 423
 424 config SENSORS_LM83
 425         tristate "National Semiconductor LM83 and compatibles"
 426         depends on I2C
 427         help
 428           If you say yes here you get support for National Semiconductor
 429           LM82 and LM83 sensor chips.
 430
 431           This driver can also be built as a module.  If so, the module
 432           will be called lm83.
 433
 434 config SENSORS_LM85
 435         tristate "National Semiconductor LM85 and compatibles"
 436         depends on I2C && EXPERIMENTAL
 437         select HWMON_VID
 438         help
 439           If you say yes here you get support for National Semiconductor LM85
 440           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 441
 442           This driver can also be built as a module.  If so, the module
 443           will be called lm85.
 444
 445 config SENSORS_LM87
 446         tristate "National Semiconductor LM87 and compatibles"
 447         depends on I2C
 448         select HWMON_VID
 449         help
 450           If you say yes here you get support for National Semiconductor LM87
 451           and Analog Devices ADM1024 sensor chips.
 452
 453           This driver can also be built as a module.  If so, the module
 454           will be called lm87.
 455
 456 config SENSORS_LM90
 457         tristate "National Semiconductor LM90 and compatibles"
 458         depends on I2C
 459         help
 460           If you say yes here you get support for National Semiconductor LM90,
 461           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
 462           MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
 463
 464           The Analog Devices ADT7461 sensor chip is also supported, but only
 465           if found in ADM1032 compatibility mode.
 466
 467           This driver can also be built as a module.  If so, the module
 468           will be called lm90.
 469
 470 config SENSORS_LM92
 471         tristate "National Semiconductor LM92 and compatibles"
 472         depends on I2C
 473         help
 474           If you say yes here you get support for National Semiconductor LM92
 475           and Maxim MAX6635 sensor chips.
 476
 477           This driver can also be built as a module.  If so, the module
 478           will be called lm92.
 479
 480 config SENSORS_LM93
 481         tristate "National Semiconductor LM93 and compatibles"
 482         depends on I2C
 483         select HWMON_VID
 484         help
 485           If you say yes here you get support for National Semiconductor LM93
 486           sensor chips.
 487
 488           This driver can also be built as a module.  If so, the module
 489           will be called lm93.
 490
 491 config SENSORS_MAX1619
 492         tristate "Maxim MAX1619 sensor chip"
 493         depends on I2C
 494         help
 495           If you say yes here you get support for MAX1619 sensor chip.
 496
 497           This driver can also be built as a module.  If so, the module
 498           will be called max1619.
 499
 500 config SENSORS_MAX6650
 501         tristate "Maxim MAX6650 sensor chip"
 502         depends on I2C && EXPERIMENTAL
 503         help
 504           If you say yes here you get support for the MAX6650 / MAX6651
 505           sensor chips.
 506
 507           This driver can also be built as a module.  If so, the module
 508           will be called max6650.
 509
 510 config SENSORS_PC87360
 511         tristate "National Semiconductor PC87360 family"
 512         select HWMON_VID
 513         help
 514           If you say yes here you get access to the hardware monitoring
 515           functions of the National Semiconductor PC8736x Super-I/O chips.
 516           The PC87360, PC87363 and PC87364 only have fan monitoring and
 517           control.  The PC87365 and PC87366 additionally have voltage and
 518           temperature monitoring.
 519
 520           This driver can also be built as a module.  If so, the module
 521           will be called pc87360.
 522
 523 config SENSORS_PC87427
 524         tristate "National Semiconductor PC87427"
 525         depends on EXPERIMENTAL
 526         help
 527           If you say yes here you get access to the hardware monitoring
 528           functions of the National Semiconductor PC87427 Super-I/O chip.
 529           The chip has two distinct logical devices, one for fan speed
 530           monitoring and control, and one for voltage and temperature
 531           monitoring. Only fan speed monitoring is supported right now.
 532
 533           This driver can also be built as a module.  If so, the module
 534           will be called pc87427.
 535
 536 config SENSORS_SIS5595
 537         tristate "Silicon Integrated Systems Corp. SiS5595"
 538         depends on PCI
 539         help
 540           If you say yes here you get support for the integrated sensors in
 541           SiS5595 South Bridges.
 542
 543           This driver can also be built as a module.  If so, the module
 544           will be called sis5595.
 545
 546 config SENSORS_DME1737
 547         tristate "SMSC DME1737, SCH311x and compatibles"
 548         depends on I2C && EXPERIMENTAL
 549         select HWMON_VID
 550         help
 551           If you say yes here you get support for the hardware monitoring
 552           and fan control features of the SMSC DME1737 (and compatibles
 553           like the Asus A8000) and SCH311x Super-I/O chips.
 554
 555           This driver can also be built as a module.  If so, the module
 556           will be called dme1737.
 557
 558 config SENSORS_SMSC47M1
 559         tristate "SMSC LPC47M10x and compatibles"
 560         help
 561           If you say yes here you get support for the integrated fan
 562           monitoring and control capabilities of the SMSC LPC47B27x,
 563           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 564           LPC47M192, LPC47M292 and LPC47M997 chips.
 565
 566           The temperature and voltage sensor features of the LPC47M15x,
 567           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 568           driver, select also "SMSC LPC47M192 and compatibles" below for
 569           those.
 570
 571           This driver can also be built as a module.  If so, the module
 572           will be called smsc47m1.
 573
 574 config SENSORS_SMSC47M192
 575         tristate "SMSC LPC47M192 and compatibles"
 576         depends on I2C && EXPERIMENTAL
 577         select HWMON_VID
 578         help
 579           If you say yes here you get support for the temperature and
 580           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 581           and LPC47M997 chips.
 582
 583           The fan monitoring and control capabilities of these chips
 584           are supported by another driver, select
 585           "SMSC LPC47M10x and compatibles" above. You need both drivers
 586           if you want fan control and voltage/temperature sensor support.
 587
 588           This driver can also be built as a module.  If so, the module
 589           will be called smsc47m192.
 590
 591 config SENSORS_SMSC47B397
 592         tristate "SMSC LPC47B397-NC"
 593         depends on EXPERIMENTAL
 594         help
 595           If you say yes here you get support for the SMSC LPC47B397-NC
 596           sensor chip.
 597
 598           This driver can also be built as a module.  If so, the module
 599           will be called smsc47b397.
 600
 601 config SENSORS_ADS7828
 602         tristate "Texas Instruments ADS7828"
 603         depends on I2C
 604         help
 605           If you say yes here you get support for Texas Instruments ADS7828
 606           12-bit 8-channel ADC device.
 607
 608           This driver can also be built as a module.  If so, the module
 609           will be called ads7828.
 610
 611 config SENSORS_THMC50
 612         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 613         depends on I2C && EXPERIMENTAL
 614         help
 615           If you say yes here you get support for Texas Instruments THMC50
 616           sensor chips and clones: the Analog Devices ADM1022.
 617
 618           This driver can also be built as a module.  If so, the module
 619           will be called thmc50.
 620
 621 config SENSORS_VIA686A
 622         tristate "VIA686A"
 623         depends on PCI
 624         help
 625           If you say yes here you get support for the integrated sensors in
 626           Via 686A/B South Bridges.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called via686a.
 630
 631 config SENSORS_VT1211
 632         tristate "VIA VT1211"
 633         depends on EXPERIMENTAL
 634         select HWMON_VID
 635         help
 636           If you say yes here then you get support for hardware monitoring
 637           features of the VIA VT1211 Super-I/O chip.
 638
 639           This driver can also be built as a module.  If so, the module
 640           will be called vt1211.
 641
 642 config SENSORS_VT8231
 643         tristate "VIA VT8231"
 644         depends on PCI
 645         select HWMON_VID
 646         help
 647           If you say yes here then you get support for the integrated sensors
 648           in the VIA VT8231 device.
 649
 650           This driver can also be built as a module.  If so, the module
 651           will be called vt8231.
 652
 653 config SENSORS_W83781D
 654         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 655         depends on I2C
 656         select HWMON_VID
 657         help
 658           If you say yes here you get support for the Winbond W8378x series
 659           of sensor chips: the W83781D, W83782D and W83783S, and the similar
 660           Asus AS99127F.
 661
 662           This driver can also be built as a module.  If so, the module
 663           will be called w83781d.
 664
 665 config SENSORS_W83791D
 666         tristate "Winbond W83791D"
 667         depends on I2C && EXPERIMENTAL
 668         select HWMON_VID
 669         help
 670           If you say yes here you get support for the Winbond W83791D chip.
 671
 672           This driver can also be built as a module.  If so, the module
 673           will be called w83791d.
 674
 675 config SENSORS_W83792D
 676         tristate "Winbond W83792D"
 677         depends on I2C && EXPERIMENTAL
 678         help
 679           If you say yes here you get support for the Winbond W83792D chip.
 680
 681           This driver can also be built as a module.  If so, the module
 682           will be called w83792d.
 683
 684 config SENSORS_W83793
 685         tristate "Winbond W83793"
 686         depends on I2C && EXPERIMENTAL
 687         select HWMON_VID
 688         help
 689           If you say yes here you get support for the Winbond W83793
 690           hardware monitoring chip.
 691
 692           This driver can also be built as a module.  If so, the module
 693           will be called w83793.
 694
 695 config SENSORS_W83L785TS
 696         tristate "Winbond W83L785TS-S"
 697         depends on I2C && EXPERIMENTAL
 698         help
 699           If you say yes here you get support for the Winbond W83L785TS-S
 700           sensor chip, which is used on the Asus A7N8X, among other
 701           motherboards.
 702
 703           This driver can also be built as a module.  If so, the module
 704           will be called w83l785ts.
 705
 706 config SENSORS_W83L786NG
 707         tristate "Winbond W83L786NG, W83L786NR"
 708         depends on I2C && EXPERIMENTAL
 709         help
 710           If you say yes here you get support for the Winbond W83L786NG
 711           and W83L786NR sensor chips.
 712
 713           This driver can also be built as a module.  If so, the module
 714           will be called w83l786ng.
 715
 716 config SENSORS_W83627HF
 717         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 718         select HWMON_VID
 719         help
 720           If you say yes here you get support for the Winbond W836X7 series
 721           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 722           W83697HF.
 723
 724           This driver can also be built as a module.  If so, the module
 725           will be called w83627hf.
 726
 727 config SENSORS_W83627EHF
 728         tristate "Winbond W83627EHF/DHG"
 729         select HWMON_VID
 730         help
 731           If you say yes here you get support for the hardware
 732           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
 733
 734           This driver also supports the W83627EHG, which is the lead-free
 735           version of the W83627EHF, and the W83627DHG, which is a similar
 736           chip suited for specific Intel processors that use PECI such as
 737           the Core 2 Duo.
 738
 739           This driver can also be built as a module.  If so, the module
 740           will be called w83627ehf.
 741
 742 config SENSORS_HDAPS
 743         tristate "IBM Hard Drive Active Protection System (hdaps)"
 744         depends on INPUT && X86
 745         select INPUT_POLLDEV
 746         default n
 747         help
 748           This driver provides support for the IBM Hard Drive Active Protection
 749           System (hdaps), which provides an accelerometer and other misc. data.
 750           ThinkPads starting with the R50, T41, and X40 are supported.  The
 751           accelerometer data is readable via sysfs.
 752
 753           This driver also provides an absolute input class device, allowing
 754           the laptop to act as a pinball machine-esque joystick.
 755
 756           If your ThinkPad is not recognized by the driver, please update to latest
 757           BIOS. This is especially the case for some R52 ThinkPads.
 758
 759           Say Y here if you have an applicable laptop and want to experience
 760           the awesome power of hdaps.
 761
 762 config SENSORS_APPLESMC
 763         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 764         depends on INPUT && X86
 765         select NEW_LEDS
 766         select LEDS_CLASS
 767         select INPUT_POLLDEV
 768         default n
 769         help
 770           This driver provides support for the Apple System Management
 771           Controller, which provides an accelerometer (Apple Sudden Motion
 772           Sensor), light sensors, temperature sensors, keyboard backlight
 773           control and fan control.
 774
 775           Only Intel-based Apple's computers are supported (MacBook Pro,
 776           MacBook, MacMini).
 777
 778           Data from the different sensors, keyboard backlight control and fan
 779           control are accessible via sysfs.
 780
 781           This driver also provides an absolute input class device, allowing
 782           the laptop to act as a pinball machine-esque joystick.
 783
 784           Say Y here if you have an applicable laptop and want to experience
 785           the awesome power of applesmc.
 786
 787 config HWMON_DEBUG_CHIP
 788         bool "Hardware Monitoring Chip debugging messages"
 789         default n
 790         help
 791           Say Y here if you want the I2C chip drivers to produce a bunch of
 792           debug messages to the system log.  Select this if you are having
 793           a problem with I2C support and want to see more of what is going
 794           on.
 795
 796 endif # HWMON