2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
42 config SENSORS_ABITUGURU
43 tristate "Abit uGuru (rev 1 & 2)"
44 depends on X86 && DMI && EXPERIMENTAL
46 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
57 config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
59 depends on X86 && DMI && EXPERIMENTAL
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
72 tristate "Analog Devices AD7314 and compatibles"
73 depends on SPI && EXPERIMENTAL
75 If you say yes here you get support for the Analog Devices
76 AD7314, ADT7301 and ADT7302 temperature sensors.
78 This driver can also be built as a module. If so, the module
79 will be called ad7314.
82 tristate "Analog Devices AD7414"
83 depends on I2C && EXPERIMENTAL
85 If you say yes here you get support for the Analog Devices
86 AD7414 temperature monitoring chip.
88 This driver can also be built as a module. If so, the module
89 will be called ad7414.
92 tristate "Analog Devices AD7416, AD7417 and AD7418"
93 depends on I2C && EXPERIMENTAL
95 If you say yes here you get support for the Analog Devices
96 AD7416, AD7417 and AD7418 temperature monitoring chips.
98 This driver can also be built as a module. If so, the module
99 will be called ad7418.
102 tristate "National Semiconductor ADCxxxSxxx"
103 depends on SPI_MASTER && EXPERIMENTAL
105 If you say yes here you get support for the National Semiconductor
106 ADC<bb><c>S<sss> chip family, where
107 * bb is the resolution in number of bits (8, 10, 12)
108 * c is the number of channels (1, 2, 4, 8)
109 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
110 kSPS and 101 for 1 MSPS)
112 Examples : ADC081S101, ADC124S501, ...
114 This driver can also be built as a module. If so, the module
115 will be called adcxx.
117 config SENSORS_ADM1021
118 tristate "Analog Devices ADM1021 and compatibles"
121 If you say yes here you get support for Analog Devices ADM1021
122 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
123 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
125 This driver can also be built as a module. If so, the module
126 will be called adm1021.
128 config SENSORS_ADM1025
129 tristate "Analog Devices ADM1025 and compatibles"
133 If you say yes here you get support for Analog Devices ADM1025
134 and Philips NE1619 sensor chips.
136 This driver can also be built as a module. If so, the module
137 will be called adm1025.
139 config SENSORS_ADM1026
140 tristate "Analog Devices ADM1026 and compatibles"
144 If you say yes here you get support for Analog Devices ADM1026
147 This driver can also be built as a module. If so, the module
148 will be called adm1026.
150 config SENSORS_ADM1029
151 tristate "Analog Devices ADM1029"
154 If you say yes here you get support for Analog Devices ADM1029
156 Very rare chip, please let us know you use it.
158 This driver can also be built as a module. If so, the module
159 will be called adm1029.
161 config SENSORS_ADM1031
162 tristate "Analog Devices ADM1031 and compatibles"
165 If you say yes here you get support for Analog Devices ADM1031
166 and ADM1030 sensor chips.
168 This driver can also be built as a module. If so, the module
169 will be called adm1031.
171 config SENSORS_ADM9240
172 tristate "Analog Devices ADM9240 and compatibles"
176 If you say yes here you get support for Analog Devices ADM9240,
177 Dallas DS1780, National Semiconductor LM81 sensor chips.
179 This driver can also be built as a module. If so, the module
180 will be called adm9240.
182 config SENSORS_ADT7411
183 tristate "Analog Devices ADT7411"
184 depends on I2C && EXPERIMENTAL
186 If you say yes here you get support for the Analog Devices
187 ADT7411 voltage and temperature monitoring chip.
189 This driver can also be built as a module. If so, the module
190 will be called adt7411.
192 config SENSORS_ADT7462
193 tristate "Analog Devices ADT7462"
194 depends on I2C && EXPERIMENTAL
196 If you say yes here you get support for the Analog Devices
197 ADT7462 temperature monitoring chips.
199 This driver can also be built as a module. If so, the module
200 will be called adt7462.
202 config SENSORS_ADT7470
203 tristate "Analog Devices ADT7470"
204 depends on I2C && EXPERIMENTAL
206 If you say yes here you get support for the Analog Devices
207 ADT7470 temperature monitoring chips.
209 This driver can also be built as a module. If so, the module
210 will be called adt7470.
212 config SENSORS_ADT7475
213 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
217 If you say yes here you get support for the Analog Devices
218 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
221 This driver can also be build as a module. If so, the module
222 will be called adt7475.
224 config SENSORS_ASC7621
225 tristate "Andigilog aSC7621"
228 If you say yes here you get support for the aSC7621
229 family of SMBus sensors chip found on most Intel X38, X48, X58,
230 945, 965 and 975 desktop boards. Currently supported chips:
234 This driver can also be built as a module. If so, the module
235 will be called asc7621.
237 config SENSORS_K8TEMP
238 tristate "AMD Athlon64/FX or Opteron temperature sensor"
239 depends on X86 && PCI && EXPERIMENTAL
241 If you say yes here you get support for the temperature
242 sensor(s) inside your CPU. Supported is whole AMD K8
243 microarchitecture. Please note that you will need at least
244 lm-sensors 2.10.1 for proper userspace support.
246 This driver can also be built as a module. If so, the module
247 will be called k8temp.
249 config SENSORS_K10TEMP
250 tristate "AMD Family 10h+ temperature sensor"
251 depends on X86 && PCI
253 If you say yes here you get support for the temperature
254 sensor(s) inside your CPU. Supported are later revisions of
255 the AMD Family 10h and all revisions of the AMD Family 11h,
256 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
258 This driver can also be built as a module. If so, the module
259 will be called k10temp.
261 config SENSORS_FAM15H_POWER
262 tristate "AMD Family 15h processor power"
263 depends on X86 && PCI
265 If you say yes here you get support for processor power
266 information of your AMD family 15h CPU.
268 This driver can also be built as a module. If so, the module
269 will be called fam15h_power.
271 config SENSORS_ASB100
272 tristate "Asus ASB100 Bach"
273 depends on X86 && I2C && EXPERIMENTAL
276 If you say yes here you get support for the ASB100 Bach sensor
277 chip found on some Asus mainboards.
279 This driver can also be built as a module. If so, the module
280 will be called asb100.
283 tristate "Attansic ATXP1 VID controller"
284 depends on I2C && EXPERIMENTAL
287 If you say yes here you get support for the Attansic ATXP1 VID
290 If your board have such a chip, you are able to control your CPU
291 core and other voltages.
293 This driver can also be built as a module. If so, the module
294 will be called atxp1.
297 tristate "Dallas Semiconductor DS620"
300 If you say yes here you get support for Dallas Semiconductor
303 This driver can also be built as a module. If so, the module
304 will be called ds620.
306 config SENSORS_DS1621
307 tristate "Dallas Semiconductor DS1621 and DS1625"
310 If you say yes here you get support for Dallas Semiconductor
311 DS1621 and DS1625 sensor chips.
313 This driver can also be built as a module. If so, the module
314 will be called ds1621.
316 config SENSORS_EXYNOS4_TMU
317 tristate "Temperature sensor on Samsung EXYNOS4"
318 depends on EXYNOS4_DEV_TMU
320 If you say yes here you get support for TMU (Thermal Managment
321 Unit) on SAMSUNG EXYNOS4 series of SoC.
323 This driver can also be built as a module. If so, the module
324 will be called exynos4-tmu.
326 config SENSORS_I5K_AMB
327 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
328 depends on PCI && EXPERIMENTAL
330 If you say yes here you get support for FB-DIMM AMB temperature
331 monitoring chips on systems with the Intel 5000 series chipset.
333 This driver can also be built as a module. If so, the module
334 will be called i5k_amb.
336 config SENSORS_F71805F
337 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
339 If you say yes here you get support for hardware monitoring
340 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
343 This driver can also be built as a module. If so, the module
344 will be called f71805f.
346 config SENSORS_F71882FG
347 tristate "Fintek F71882FG and compatibles"
349 If you say yes here you get support for hardware monitoring
350 features of many Fintek Super-I/O (LPC) chips. The currently
364 This driver can also be built as a module. If so, the module
365 will be called f71882fg.
367 config SENSORS_F75375S
368 tristate "Fintek F75375S/SP and F75373"
371 If you say yes here you get support for hardware monitoring
372 features of the Fintek F75375S/SP and F75373
374 This driver can also be built as a module. If so, the module
375 will be called f75375s.
377 config SENSORS_FSCHMD
378 tristate "Fujitsu Siemens Computers sensor chips"
379 depends on X86 && I2C
381 If you say yes here you get support for the following Fujitsu
382 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
383 Heimdall, Heracles, Hades and Syleus including support for the
386 This is a merged driver for FSC sensor chips replacing the fscpos,
387 fscscy and fscher drivers and adding support for several other FSC
390 This driver can also be built as a module. If so, the module
391 will be called fschmd.
397 If you say yes here you get support for Global Mixed-mode
398 Technology Inc G760A fan speed PWM controller chips.
400 This driver can also be built as a module. If so, the module
401 will be called g760a.
403 config SENSORS_GL518SM
404 tristate "Genesys Logic GL518SM"
407 If you say yes here you get support for Genesys Logic GL518SM
410 This driver can also be built as a module. If so, the module
411 will be called gl518sm.
413 config SENSORS_GL520SM
414 tristate "Genesys Logic GL520SM"
418 If you say yes here you get support for Genesys Logic GL520SM
421 This driver can also be built as a module. If so, the module
422 will be called gl520sm.
424 config SENSORS_GPIO_FAN
426 depends on GENERIC_GPIO
428 If you say yes here you get support for fans connected to GPIO lines.
430 This driver can also be built as a module. If so, the module
431 will be called gpio-fan.
433 config SENSORS_CORETEMP
434 tristate "Intel Core/Core2/Atom temperature sensor"
435 depends on X86 && PCI && EXPERIMENTAL
437 If you say yes here you get support for the temperature
438 sensor inside your CPU. Most of the family 6 CPUs
439 are supported. Check Documentation/hwmon/coretemp for details.
441 config SENSORS_IBMAEM
442 tristate "IBM Active Energy Manager temperature/power sensors and control"
444 depends on IPMI_HANDLER
446 If you say yes here you get support for the temperature and
447 power sensors and capping hardware in various IBM System X
448 servers that support Active Energy Manager. This includes
449 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
450 and certain HC10/HS2x/LS2x/QS2x blades.
452 This driver can also be built as a module. If so, the module
453 will be called ibmaem.
455 config SENSORS_IBMPEX
456 tristate "IBM PowerExecutive temperature/power sensors"
458 depends on IPMI_HANDLER
460 If you say yes here you get support for the temperature and
461 power sensors in various IBM System X servers that support
462 PowerExecutive. So far this includes the x3350, x3550, x3650,
463 x3655, and x3755; the x3800, x3850, and x3950 models that have
464 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
466 This driver can also be built as a module. If so, the module
467 will be called ibmpex.
470 tristate "ITE IT87xx and compatibles"
473 If you say yes here you get support for ITE IT8705F, IT8712F,
474 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
475 chips, and the SiS960 clone.
477 This driver can also be built as a module. If so, the module
480 config SENSORS_JZ4740
481 tristate "Ingenic JZ4740 SoC ADC driver"
482 depends on MACH_JZ4740 && MFD_JZ4740_ADC
484 If you say yes here you get support for reading adc values from the ADCIN
485 pin on Ingenic JZ4740 SoC based boards.
487 This driver can also be build as a module. If so, the module will be
491 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
494 If you say yes here, you get support for JEDEC JC42.4 compliant
495 temperature sensors, which are used on many DDR3 memory modules for
496 mobile devices and servers. Support will include, but not be limited
497 to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
498 MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
500 This driver can also be built as a module. If so, the module
503 config SENSORS_LINEAGE
504 tristate "Lineage Compact Power Line Power Entry Module"
505 depends on I2C && EXPERIMENTAL
507 If you say yes here you get support for the Lineage Compact Power Line
508 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
509 CP2000DC, CP2725, and others.
511 This driver can also be built as a module. If so, the module
512 will be called lineage-pem.
515 tristate "National Semiconductor LM63 and LM64"
518 If you say yes here you get support for the National
519 Semiconductor LM63 and LM64 remote diode digital temperature
520 sensors with integrated fan control. Such chips are found
521 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
524 This driver can also be built as a module. If so, the module
528 tristate "National Semiconductor LM70 / Texas Instruments TMP121"
529 depends on SPI_MASTER
531 If you say yes here you get support for the National Semiconductor
532 LM70 and Texas Instruments TMP121/TMP123 digital temperature
535 This driver can also be built as a module. If so, the module
539 tristate "National Semiconductor LM73"
542 If you say yes here you get support for National Semiconductor LM73
544 This driver can also be built as a module. If so, the module
548 tristate "National Semiconductor LM75 and compatibles"
551 If you say yes here you get support for one common type of
552 temperature sensor chip, with models including:
554 - Dallas Semiconductor DS75 and DS1775
555 - Maxim MAX6625 and MAX6626
557 - National Semiconductor LM75, LM75A
559 - ST Microelectronics STDS75
560 - TelCom (now Microchip) TCN75
561 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
564 This driver supports driver model based binding through board
565 specific I2C device tables.
567 It also supports the "legacy" style of driver binding. To use
568 that with some chips which don't replicate LM75 quirks exactly,
569 you may need the "force" module parameter.
571 This driver can also be built as a module. If so, the module
575 tristate "National Semiconductor LM77"
578 If you say yes here you get support for National Semiconductor LM77
581 This driver can also be built as a module. If so, the module
585 tristate "National Semiconductor LM78 and compatibles"
589 If you say yes here you get support for National Semiconductor LM78,
592 This driver can also be built as a module. If so, the module
596 tristate "National Semiconductor LM80"
599 If you say yes here you get support for National Semiconductor
602 This driver can also be built as a module. If so, the module
606 tristate "National Semiconductor LM83 and compatibles"
609 If you say yes here you get support for National Semiconductor
610 LM82 and LM83 sensor chips.
612 This driver can also be built as a module. If so, the module
616 tristate "National Semiconductor LM85 and compatibles"
620 If you say yes here you get support for National Semiconductor LM85
621 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
622 EMC6D101, EMC6D102, and EMC6D103.
624 This driver can also be built as a module. If so, the module
628 tristate "National Semiconductor LM87 and compatibles"
632 If you say yes here you get support for National Semiconductor LM87
633 and Analog Devices ADM1024 sensor chips.
635 This driver can also be built as a module. If so, the module
639 tristate "National Semiconductor LM90 and compatibles"
642 If you say yes here you get support for National Semiconductor LM90,
643 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
644 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
645 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
646 Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
648 This driver can also be built as a module. If so, the module
652 tristate "National Semiconductor LM92 and compatibles"
655 If you say yes here you get support for National Semiconductor LM92
656 and Maxim MAX6635 sensor chips.
658 This driver can also be built as a module. If so, the module
662 tristate "National Semiconductor LM93 and compatibles"
666 If you say yes here you get support for National Semiconductor LM93,
667 LM94, and compatible sensor chips.
669 This driver can also be built as a module. If so, the module
672 config SENSORS_LTC4151
673 tristate "Linear Technology LTC4151"
677 If you say yes here you get support for Linear Technology LTC4151
678 High Voltage I2C Current and Voltage Monitor interface.
680 This driver can also be built as a module. If so, the module will
683 config SENSORS_LTC4215
684 tristate "Linear Technology LTC4215"
685 depends on I2C && EXPERIMENTAL
688 If you say yes here you get support for Linear Technology LTC4215
689 Hot Swap Controller I2C interface.
691 This driver can also be built as a module. If so, the module will
694 config SENSORS_LTC4245
695 tristate "Linear Technology LTC4245"
696 depends on I2C && EXPERIMENTAL
699 If you say yes here you get support for Linear Technology LTC4245
700 Multiple Supply Hot Swap Controller I2C interface.
702 This driver can also be built as a module. If so, the module will
705 config SENSORS_LTC4261
706 tristate "Linear Technology LTC4261"
707 depends on I2C && EXPERIMENTAL
710 If you say yes here you get support for Linear Technology LTC4261
711 Negative Voltage Hot Swap Controller I2C interface.
713 This driver can also be built as a module. If so, the module will
716 config SENSORS_LM95241
717 tristate "National Semiconductor LM95241 and compatibles"
720 If you say yes here you get support for LM95231 and LM95241 sensor
723 This driver can also be built as a module. If so, the module
724 will be called lm95241.
726 config SENSORS_LM95245
727 tristate "National Semiconductor LM95245 sensor chip"
728 depends on I2C && EXPERIMENTAL
730 If you say yes here you get support for LM95245 sensor chip.
732 This driver can also be built as a module. If so, the module
733 will be called lm95245.
735 config SENSORS_MAX1111
736 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
737 depends on SPI_MASTER
739 Say y here to support Maxim's MAX1111 ADC chips.
741 This driver can also be built as a module. If so, the module
742 will be called max1111.
744 config SENSORS_MAX16065
745 tristate "Maxim MAX16065 System Manager and compatibles"
748 If you say yes here you get support for hardware monitoring
749 capabilities of the following Maxim System Manager chips.
757 This driver can also be built as a module. If so, the module
758 will be called max16065.
760 config SENSORS_MAX1619
761 tristate "Maxim MAX1619 sensor chip"
764 If you say yes here you get support for MAX1619 sensor chip.
766 This driver can also be built as a module. If so, the module
767 will be called max1619.
769 config SENSORS_MAX1668
770 tristate "Maxim MAX1668 and compatibles"
771 depends on I2C && EXPERIMENTAL
773 If you say yes here you get support for MAX1668, MAX1989 and
776 This driver can also be built as a module. If so, the module
777 will be called max1668.
779 config SENSORS_MAX6639
780 tristate "Maxim MAX6639 sensor chip"
781 depends on I2C && EXPERIMENTAL
783 If you say yes here you get support for the MAX6639
786 This driver can also be built as a module. If so, the module
787 will be called max6639.
789 config SENSORS_MAX6642
790 tristate "Maxim MAX6642 sensor chip"
791 depends on I2C && EXPERIMENTAL
793 If you say yes here you get support for MAX6642 sensor chip.
794 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
795 with Overtemperature Alarm from Maxim.
797 This driver can also be built as a module. If so, the module
798 will be called max6642.
800 config SENSORS_MAX6650
801 tristate "Maxim MAX6650 sensor chip"
802 depends on I2C && EXPERIMENTAL
804 If you say yes here you get support for the MAX6650 / MAX6651
807 This driver can also be built as a module. If so, the module
808 will be called max6650.
810 config SENSORS_NTC_THERMISTOR
811 tristate "NTC thermistor support"
812 depends on EXPERIMENTAL
814 This driver supports NTC thermistors sensor reading and its
815 interpretation. The driver can also monitor the temperature and
816 send notifications about the temperature.
818 Currently, this driver supports
819 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
821 This driver can also be built as a module. If so, the module
822 will be called ntc-thermistor.
824 config SENSORS_PC87360
825 tristate "National Semiconductor PC87360 family"
828 If you say yes here you get access to the hardware monitoring
829 functions of the National Semiconductor PC8736x Super-I/O chips.
830 The PC87360, PC87363 and PC87364 only have fan monitoring and
831 control. The PC87365 and PC87366 additionally have voltage and
832 temperature monitoring.
834 This driver can also be built as a module. If so, the module
835 will be called pc87360.
837 config SENSORS_PC87427
838 tristate "National Semiconductor PC87427"
840 If you say yes here you get access to the hardware monitoring
841 functions of the National Semiconductor PC87427 Super-I/O chip.
842 The chip has two distinct logical devices, one for fan speed
843 monitoring and control, and one for voltage and temperature
844 monitoring. Fan speed monitoring and control are supported, as
845 well as temperature monitoring. Voltages aren't supported yet.
847 This driver can also be built as a module. If so, the module
848 will be called pc87427.
850 config SENSORS_PCF8591
851 tristate "Philips PCF8591 ADC/DAC"
855 If you say yes here you get support for Philips PCF8591 4-channel
856 ADC, 1-channel DAC chips.
858 This driver can also be built as a module. If so, the module
859 will be called pcf8591.
861 These devices are hard to detect and rarely found on mainstream
862 hardware. If unsure, say N.
864 source drivers/hwmon/pmbus/Kconfig
867 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
868 depends on GENERIC_GPIO
870 If you say yes here you get support for the Sensiron SHT10, SHT11,
871 SHT15, SHT71, SHT75 humidity and temperature sensors.
873 This driver can also be built as a module. If so, the module
874 will be called sht15.
877 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
880 If you say yes here you get support for the Sensiron SHT21, SHT25
881 humidity and temperature sensors.
883 This driver can also be built as a module. If so, the module
884 will be called sht21.
887 tristate "Samsung built-in ADC"
890 If you say yes here you get support for the on-board ADCs of
891 the Samsung S3C24XX, S3C64XX and other series of SoC
893 This driver can also be built as a module. If so, the module
894 will be called s3c-hwmon.
896 config SENSORS_S3C_RAW
897 bool "Include raw channel attributes in sysfs"
898 depends on SENSORS_S3C
900 Say Y here if you want to include raw copies of all the ADC
903 config SENSORS_SIS5595
904 tristate "Silicon Integrated Systems Corp. SiS5595"
907 If you say yes here you get support for the integrated sensors in
908 SiS5595 South Bridges.
910 This driver can also be built as a module. If so, the module
911 will be called sis5595.
913 config SENSORS_SMM665
914 tristate "Summit Microelectronics SMM665"
915 depends on I2C && EXPERIMENTAL
918 If you say yes here you get support for the hardware monitoring
919 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
920 Active DC Output Controller / Monitor.
922 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
923 Support for those chips is untested.
925 This driver can also be built as a module. If so, the module will
928 config SENSORS_DME1737
929 tristate "SMSC DME1737, SCH311x and compatibles"
930 depends on I2C && EXPERIMENTAL
933 If you say yes here you get support for the hardware monitoring
934 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
935 Asus A8000 Super-I/O chips.
937 This driver can also be built as a module. If so, the module
938 will be called dme1737.
940 config SENSORS_EMC1403
941 tristate "SMSC EMC1403/23 thermal sensor"
944 If you say yes here you get support for the SMSC EMC1403/23
945 temperature monitoring chip.
947 Threshold values can be configured using sysfs.
948 Data from the different diodes are accessible via sysfs.
950 config SENSORS_EMC2103
951 tristate "SMSC EMC2103"
954 If you say yes here you get support for the temperature
955 and fan sensors of the SMSC EMC2103 chips.
957 This driver can also be built as a module. If so, the module
958 will be called emc2103.
960 config SENSORS_EMC6W201
961 tristate "SMSC EMC6W201"
964 If you say yes here you get support for the SMSC EMC6W201
965 hardware monitoring chip.
967 This driver can also be built as a module. If so, the module
968 will be called emc6w201.
970 config SENSORS_SMSC47M1
971 tristate "SMSC LPC47M10x and compatibles"
973 If you say yes here you get support for the integrated fan
974 monitoring and control capabilities of the SMSC LPC47B27x,
975 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
976 LPC47M192, LPC47M292 and LPC47M997 chips.
978 The temperature and voltage sensor features of the LPC47M15x,
979 LPC47M192, LPC47M292 and LPC47M997 are supported by another
980 driver, select also "SMSC LPC47M192 and compatibles" below for
983 This driver can also be built as a module. If so, the module
984 will be called smsc47m1.
986 config SENSORS_SMSC47M192
987 tristate "SMSC LPC47M192 and compatibles"
991 If you say yes here you get support for the temperature and
992 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
995 The fan monitoring and control capabilities of these chips
996 are supported by another driver, select
997 "SMSC LPC47M10x and compatibles" above. You need both drivers
998 if you want fan control and voltage/temperature sensor support.
1000 This driver can also be built as a module. If so, the module
1001 will be called smsc47m192.
1003 config SENSORS_SMSC47B397
1004 tristate "SMSC LPC47B397-NC"
1005 depends on EXPERIMENTAL
1007 If you say yes here you get support for the SMSC LPC47B397-NC
1010 This driver can also be built as a module. If so, the module
1011 will be called smsc47b397.
1013 config SENSORS_SCH56XX_COMMON
1017 config SENSORS_SCH5627
1018 tristate "SMSC SCH5627"
1019 select SENSORS_SCH56XX_COMMON
1021 If you say yes here you get support for the hardware monitoring
1022 features of the SMSC SCH5627 Super-I/O chip.
1024 This driver can also be built as a module. If so, the module
1025 will be called sch5627.
1027 config SENSORS_SCH5636
1028 tristate "SMSC SCH5636"
1029 select SENSORS_SCH56XX_COMMON
1031 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1032 hardware monitoring solutions, allowing motherboard manufacturers to
1033 create their own custom hwmon solution based upon the SCH5636.
1035 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1036 hwmon solution. Say yes here if you want support for the Fujitsu
1037 Theseus' hardware monitoring features.
1039 This driver can also be built as a module. If so, the module
1040 will be called sch5636.
1042 config SENSORS_ADS1015
1043 tristate "Texas Instruments ADS1015"
1046 If you say yes here you get support for Texas Instruments ADS1015
1047 12-bit 4-input ADC device.
1049 This driver can also be built as a module. If so, the module
1050 will be called ads1015.
1052 config SENSORS_ADS7828
1053 tristate "Texas Instruments ADS7828"
1056 If you say yes here you get support for Texas Instruments ADS7828
1057 12-bit 8-channel ADC device.
1059 This driver can also be built as a module. If so, the module
1060 will be called ads7828.
1062 config SENSORS_ADS7871
1063 tristate "Texas Instruments ADS7871 A/D converter"
1066 If you say yes here you get support for TI ADS7871 & ADS7870
1068 This driver can also be built as a module. If so, the module
1069 will be called ads7871.
1071 config SENSORS_AMC6821
1072 tristate "Texas Instruments AMC6821"
1073 depends on I2C && EXPERIMENTAL
1075 If you say yes here you get support for the Texas Instruments
1076 AMC6821 hardware monitoring chips.
1078 This driver can also be build as a module. If so, the module
1079 will be called amc6821.
1081 config SENSORS_THMC50
1082 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1085 If you say yes here you get support for Texas Instruments THMC50
1086 sensor chips and clones: the Analog Devices ADM1022.
1088 This driver can also be built as a module. If so, the module
1089 will be called thmc50.
1091 config SENSORS_TMP102
1092 tristate "Texas Instruments TMP102"
1093 depends on I2C && EXPERIMENTAL
1095 If you say yes here you get support for Texas Instruments TMP102
1098 This driver can also be built as a module. If so, the module
1099 will be called tmp102.
1101 config SENSORS_TMP401
1102 tristate "Texas Instruments TMP401 and compatibles"
1103 depends on I2C && EXPERIMENTAL
1105 If you say yes here you get support for Texas Instruments TMP401 and
1106 TMP411 temperature sensor chips.
1108 This driver can also be built as a module. If so, the module
1109 will be called tmp401.
1111 config SENSORS_TMP421
1112 tristate "Texas Instruments TMP421 and compatible"
1113 depends on I2C && EXPERIMENTAL
1115 If you say yes here you get support for Texas Instruments TMP421,
1116 TMP422 and TMP423 temperature sensor chips.
1118 This driver can also be built as a module. If so, the module
1119 will be called tmp421.
1121 config SENSORS_TWL4030_MADC
1122 tristate "Texas Instruments TWL4030 MADC Hwmon"
1123 depends on TWL4030_MADC
1125 If you say yes here you get hwmon support for triton
1128 This driver can also be built as a module. If so it will be called
1131 config SENSORS_VIA_CPUTEMP
1132 tristate "VIA CPU temperature sensor"
1136 If you say yes here you get support for the temperature
1137 sensor inside your CPU. Supported are all known variants of
1138 the VIA C7 and Nano.
1140 config SENSORS_VIA686A
1144 If you say yes here you get support for the integrated sensors in
1145 Via 686A/B South Bridges.
1147 This driver can also be built as a module. If so, the module
1148 will be called via686a.
1150 config SENSORS_VT1211
1151 tristate "VIA VT1211"
1154 If you say yes here then you get support for hardware monitoring
1155 features of the VIA VT1211 Super-I/O chip.
1157 This driver can also be built as a module. If so, the module
1158 will be called vt1211.
1160 config SENSORS_VT8231
1161 tristate "VIA VT8231"
1165 If you say yes here then you get support for the integrated sensors
1166 in the VIA VT8231 device.
1168 This driver can also be built as a module. If so, the module
1169 will be called vt8231.
1171 config SENSORS_W83781D
1172 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1176 If you say yes here you get support for the Winbond W8378x series
1177 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1180 This driver can also be built as a module. If so, the module
1181 will be called w83781d.
1183 config SENSORS_W83791D
1184 tristate "Winbond W83791D"
1188 If you say yes here you get support for the Winbond W83791D chip.
1190 This driver can also be built as a module. If so, the module
1191 will be called w83791d.
1193 config SENSORS_W83792D
1194 tristate "Winbond W83792D"
1197 If you say yes here you get support for the Winbond W83792D chip.
1199 This driver can also be built as a module. If so, the module
1200 will be called w83792d.
1202 config SENSORS_W83793
1203 tristate "Winbond W83793"
1204 depends on I2C && EXPERIMENTAL
1207 If you say yes here you get support for the Winbond W83793
1208 hardware monitoring chip, including support for the integrated
1211 This driver can also be built as a module. If so, the module
1212 will be called w83793.
1214 config SENSORS_W83795
1215 tristate "Winbond/Nuvoton W83795G/ADG"
1216 depends on I2C && EXPERIMENTAL
1218 If you say yes here you get support for the Winbond W83795G and
1219 W83795ADG hardware monitoring chip.
1221 This driver can also be built as a module. If so, the module
1222 will be called w83795.
1224 config SENSORS_W83795_FANCTRL
1225 boolean "Include fan control support (DANGEROUS)"
1226 depends on SENSORS_W83795 && EXPERIMENTAL
1229 If you say yes here, support for the both manual and automatic
1230 fan control features will be included in the driver.
1232 This part of the code wasn't carefully reviewed and tested yet,
1233 so enabling this option is strongly discouraged on production
1234 servers. Only developers and testers should enable it for the
1237 Please also note that this option will create sysfs attribute
1238 files which may change in the future, so you shouldn't rely
1239 on them being stable.
1241 config SENSORS_W83L785TS
1242 tristate "Winbond W83L785TS-S"
1243 depends on I2C && EXPERIMENTAL
1245 If you say yes here you get support for the Winbond W83L785TS-S
1246 sensor chip, which is used on the Asus A7N8X, among other
1249 This driver can also be built as a module. If so, the module
1250 will be called w83l785ts.
1252 config SENSORS_W83L786NG
1253 tristate "Winbond W83L786NG, W83L786NR"
1254 depends on I2C && EXPERIMENTAL
1256 If you say yes here you get support for the Winbond W83L786NG
1257 and W83L786NR sensor chips.
1259 This driver can also be built as a module. If so, the module
1260 will be called w83l786ng.
1262 config SENSORS_W83627HF
1263 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1266 If you say yes here you get support for the Winbond W836X7 series
1267 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1270 This driver can also be built as a module. If so, the module
1271 will be called w83627hf.
1273 config SENSORS_W83627EHF
1274 tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1277 If you say yes here you get support for the hardware
1278 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1280 This driver also supports the W83627EHG, which is the lead-free
1281 version of the W83627EHF, and the W83627DHG, which is a similar
1282 chip suited for specific Intel processors that use PECI such as
1285 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1286 (also known as W83667HG-I), and NCT6776F.
1288 This driver can also be built as a module. If so, the module
1289 will be called w83627ehf.
1291 config SENSORS_WM831X
1292 tristate "WM831x PMICs"
1293 depends on MFD_WM831X
1295 If you say yes here you get support for the hardware
1296 monitoring functionality of the Wolfson Microelectronics
1297 WM831x series of PMICs.
1299 This driver can also be built as a module. If so, the module
1300 will be called wm831x-hwmon.
1302 config SENSORS_WM8350
1303 tristate "Wolfson Microelectronics WM835x"
1304 depends on MFD_WM8350
1306 If you say yes here you get support for the hardware
1307 monitoring features of the WM835x series of PMICs.
1309 This driver can also be built as a module. If so, the module
1310 will be called wm8350-hwmon.
1312 config SENSORS_ULTRA45
1313 tristate "Sun Ultra45 PIC16F747"
1316 This driver provides support for the Ultra45 workstation environmental
1319 config SENSORS_APPLESMC
1320 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1321 depends on INPUT && X86
1324 select INPUT_POLLDEV
1327 This driver provides support for the Apple System Management
1328 Controller, which provides an accelerometer (Apple Sudden Motion
1329 Sensor), light sensors, temperature sensors, keyboard backlight
1330 control and fan control.
1332 Only Intel-based Apple's computers are supported (MacBook Pro,
1335 Data from the different sensors, keyboard backlight control and fan
1336 control are accessible via sysfs.
1338 This driver also provides an absolute input class device, allowing
1339 the laptop to act as a pinball machine-esque joystick.
1341 Say Y here if you have an applicable laptop and want to experience
1342 the awesome power of applesmc.
1344 config SENSORS_MC13783_ADC
1345 tristate "Freescale MC13783 ADC"
1346 depends on MFD_MC13783
1348 Support for the A/D converter on MC13783 PMIC.
1352 comment "ACPI drivers"
1354 config SENSORS_ACPI_POWER
1355 tristate "ACPI 4.0 power meter"
1357 This driver exposes ACPI 4.0 power meters as hardware monitoring
1358 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1361 To compile this driver as a module, choose M here:
1362 the module will be called acpi_power_meter.
1364 config SENSORS_ATK0110
1365 tristate "ASUS ATK0110"
1366 depends on X86 && EXPERIMENTAL
1368 If you say yes here you get support for the ACPI hardware
1369 monitoring interface found in many ASUS motherboards. This
1370 driver will provide readings of fans, voltages and temperatures
1371 through the system firmware.
1373 This driver can also be built as a module. If so, the module
1374 will be called asus_atk0110.