drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_AB8500
  43         tristate "AB8500 thermal monitoring"
  44         depends on AB8500_GPADC && AB8500_BM
  45         default n
  46         help
  47           If you say yes here you get support for the thermal sensor part
  48           of the AB8500 chip. The driver includes thermal management for
  49           AB8500 die and two GPADC channels. The GPADC channel are preferably
  50           used to access sensors outside the AB8500 chip.
  51
  52           This driver can also be built as a module.  If so, the module
  53           will be called abx500-temp.
  54
  55 config SENSORS_ABITUGURU
  56         tristate "Abit uGuru (rev 1 & 2)"
  57         depends on X86 && DMI
  58         help
  59           If you say yes here you get support for the sensor part of the first
  60           and second revision of the Abit uGuru chip. The voltage and frequency
  61           control parts of the Abit uGuru are not supported. The Abit uGuru
  62           chip can be found on Abit uGuru featuring motherboards (most modern
  63           Abit motherboards from before end 2005). For more info and a list
  64           of which motherboards have which revision see
  65           Documentation/hwmon/abituguru
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called abituguru.
  69
  70 config SENSORS_ABITUGURU3
  71         tristate "Abit uGuru (rev 3)"
  72         depends on X86 && DMI
  73         help
  74           If you say yes here you get support for the sensor part of the
  75           third revision of the Abit uGuru chip. Only reading the sensors
  76           and their settings is supported. The third revision of the Abit
  77           uGuru chip can be found on recent Abit motherboards (since end
  78           2005). For more info and a list of which motherboards have which
  79           revision see Documentation/hwmon/abituguru3
  80
  81           This driver can also be built as a module.  If so, the module
  82           will be called abituguru3.
  83
  84 config SENSORS_AD7314
  85         tristate "Analog Devices AD7314 and compatibles"
  86         depends on SPI
  87         help
  88           If you say yes here you get support for the Analog Devices
  89           AD7314, ADT7301 and ADT7302 temperature sensors.
  90
  91           This driver can also be built as a module. If so, the module
  92           will be called ad7314.
  93
  94 config SENSORS_AD7414
  95         tristate "Analog Devices AD7414"
  96         depends on I2C
  97         help
  98           If you say yes here you get support for the Analog Devices
  99           AD7414 temperature monitoring chip.
 100
 101           This driver can also be built as a module. If so, the module
 102           will be called ad7414.
 103
 104 config SENSORS_AD7418
 105         tristate "Analog Devices AD7416, AD7417 and AD7418"
 106         depends on I2C
 107         help
 108           If you say yes here you get support for the Analog Devices
 109           AD7416, AD7417 and AD7418 temperature monitoring chips.
 110
 111           This driver can also be built as a module. If so, the module
 112           will be called ad7418.
 113
 114 config SENSORS_ADCXX
 115         tristate "National Semiconductor ADCxxxSxxx"
 116         depends on SPI_MASTER
 117         help
 118           If you say yes here you get support for the National Semiconductor
 119           ADC<bb><c>S<sss> chip family, where
 120           * bb  is the resolution in number of bits (8, 10, 12)
 121           * c   is the number of channels (1, 2, 4, 8)
 122           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 123             kSPS and 101 for 1 MSPS)
 124
 125           Examples : ADC081S101, ADC124S501, ...
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adcxx.
 129
 130 config SENSORS_ADM1021
 131         tristate "Analog Devices ADM1021 and compatibles"
 132         depends on I2C
 133         help
 134           If you say yes here you get support for Analog Devices ADM1021
 135           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 136           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1021.
 140
 141 config SENSORS_ADM1025
 142         tristate "Analog Devices ADM1025 and compatibles"
 143         depends on I2C
 144         select HWMON_VID
 145         help
 146           If you say yes here you get support for Analog Devices ADM1025
 147           and Philips NE1619 sensor chips.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1025.
 151
 152 config SENSORS_ADM1026
 153         tristate "Analog Devices ADM1026 and compatibles"
 154         depends on I2C
 155         select HWMON_VID
 156         help
 157           If you say yes here you get support for Analog Devices ADM1026
 158           sensor chip.
 159
 160           This driver can also be built as a module.  If so, the module
 161           will be called adm1026.
 162
 163 config SENSORS_ADM1029
 164         tristate "Analog Devices ADM1029"
 165         depends on I2C
 166         help
 167           If you say yes here you get support for Analog Devices ADM1029
 168           sensor chip.
 169           Very rare chip, please let us know you use it.
 170
 171           This driver can also be built as a module.  If so, the module
 172           will be called adm1029.
 173
 174 config SENSORS_ADM1031
 175         tristate "Analog Devices ADM1031 and compatibles"
 176         depends on I2C
 177         help
 178           If you say yes here you get support for Analog Devices ADM1031
 179           and ADM1030 sensor chips.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called adm1031.
 183
 184 config SENSORS_ADM9240
 185         tristate "Analog Devices ADM9240 and compatibles"
 186         depends on I2C
 187         select HWMON_VID
 188         help
 189           If you say yes here you get support for Analog Devices ADM9240,
 190           Dallas DS1780, National Semiconductor LM81 sensor chips.
 191
 192           This driver can also be built as a module.  If so, the module
 193           will be called adm9240.
 194
 195 config SENSORS_ADT7X10
 196         tristate
 197         help
 198           This module contains common code shared by the ADT7310/ADT7320 and
 199           ADT7410/ADT7420 temperature monitoring chip drivers.
 200
 201           If build as a module, the module will be called adt7x10.
 202
 203 config SENSORS_ADT7310
 204         tristate "Analog Devices ADT7310/ADT7320"
 205         depends on SPI_MASTER
 206         select SENSORS_ADT7X10
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7310 and ADT7320 temperature monitoring chips.
 210
 211           This driver can also be built as a module. If so, the module
 212           will be called adt7310.
 213
 214 config SENSORS_ADT7410
 215         tristate "Analog Devices ADT7410/ADT7420"
 216         depends on I2C
 217         select SENSORS_ADT7X10
 218         help
 219           If you say yes here you get support for the Analog Devices
 220           ADT7410 and ADT7420 temperature monitoring chips.
 221
 222           This driver can also be built as a module. If so, the module
 223           will be called adt7410.
 224
 225 config SENSORS_ADT7411
 226         tristate "Analog Devices ADT7411"
 227         depends on I2C
 228         help
 229           If you say yes here you get support for the Analog Devices
 230           ADT7411 voltage and temperature monitoring chip.
 231
 232           This driver can also be built as a module. If so, the module
 233           will be called adt7411.
 234
 235 config SENSORS_ADT7462
 236         tristate "Analog Devices ADT7462"
 237         depends on I2C
 238         help
 239           If you say yes here you get support for the Analog Devices
 240           ADT7462 temperature monitoring chips.
 241
 242           This driver can also be built as a module. If so, the module
 243           will be called adt7462.
 244
 245 config SENSORS_ADT7470
 246         tristate "Analog Devices ADT7470"
 247         depends on I2C
 248         help
 249           If you say yes here you get support for the Analog Devices
 250           ADT7470 temperature monitoring chips.
 251
 252           This driver can also be built as a module. If so, the module
 253           will be called adt7470.
 254
 255 config SENSORS_ADT7475
 256         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 257         depends on I2C
 258         select HWMON_VID
 259         help
 260           If you say yes here you get support for the Analog Devices
 261           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 262           chips.
 263
 264           This driver can also be build as a module.  If so, the module
 265           will be called adt7475.
 266
 267 config SENSORS_ASC7621
 268         tristate "Andigilog aSC7621"
 269         depends on I2C
 270         help
 271           If you say yes here you get support for the aSC7621
 272           family of SMBus sensors chip found on most Intel X38, X48, X58,
 273           945, 965 and 975 desktop boards.  Currently supported chips:
 274           aSC7621
 275           aSC7621a
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called asc7621.
 279
 280 config SENSORS_K8TEMP
 281         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 282         depends on X86 && PCI
 283         help
 284           If you say yes here you get support for the temperature
 285           sensor(s) inside your CPU. Supported is whole AMD K8
 286           microarchitecture. Please note that you will need at least
 287           lm-sensors 2.10.1 for proper userspace support.
 288
 289           This driver can also be built as a module.  If so, the module
 290           will be called k8temp.
 291
 292 config SENSORS_K10TEMP
 293         tristate "AMD Family 10h+ temperature sensor"
 294         depends on X86 && PCI
 295         help
 296           If you say yes here you get support for the temperature
 297           sensor(s) inside your CPU. Supported are later revisions of
 298           the AMD Family 10h and all revisions of the AMD Family 11h,
 299           12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
 300           16h (Kabini) microarchitectures.
 301
 302           This driver can also be built as a module.  If so, the module
 303           will be called k10temp.
 304
 305 config SENSORS_FAM15H_POWER
 306         tristate "AMD Family 15h processor power"
 307         depends on X86 && PCI
 308         help
 309           If you say yes here you get support for processor power
 310           information of your AMD family 15h CPU.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called fam15h_power.
 314
 315 config SENSORS_ASB100
 316         tristate "Asus ASB100 Bach"
 317         depends on X86 && I2C
 318         select HWMON_VID
 319         help
 320           If you say yes here you get support for the ASB100 Bach sensor
 321           chip found on some Asus mainboards.
 322
 323           This driver can also be built as a module.  If so, the module
 324           will be called asb100.
 325
 326 config SENSORS_ATXP1
 327         tristate "Attansic ATXP1 VID controller"
 328         depends on I2C
 329         select HWMON_VID
 330         help
 331           If you say yes here you get support for the Attansic ATXP1 VID
 332           controller.
 333
 334           If your board have such a chip, you are able to control your CPU
 335           core and other voltages.
 336
 337           This driver can also be built as a module.  If so, the module
 338           will be called atxp1.
 339
 340 config SENSORS_DS620
 341         tristate "Dallas Semiconductor DS620"
 342         depends on I2C
 343         help
 344           If you say yes here you get support for Dallas Semiconductor
 345           DS620 sensor chip.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called ds620.
 349
 350 config SENSORS_DS1621
 351         tristate "Dallas Semiconductor DS1621 and compatibles"
 352         depends on I2C
 353         help
 354           If you say yes here you get support for Dallas Semiconductor/Maxim
 355           Integrated DS1621 sensor chips and compatible models including:
 356
 357           - Dallas Semiconductor DS1625
 358           - Maxim Integrated DS1631
 359           - Maxim Integrated DS1721
 360           - Maxim Integrated DS1731
 361
 362           This driver can also be built as a module.  If so, the module
 363           will be called ds1621.
 364
 365 config SENSORS_DA9052_ADC
 366         tristate "Dialog DA9052/DA9053 ADC"
 367         depends on PMIC_DA9052
 368         help
 369           Say y here to support the ADC found on Dialog Semiconductor
 370           DA9052-BC and DA9053-AA/Bx PMICs.
 371
 372           This driver can also be built as module. If so, the module
 373           will be called da9052-hwmon.
 374
 375 config SENSORS_DA9055
 376         tristate "Dialog Semiconductor DA9055 ADC"
 377         depends on MFD_DA9055
 378         help
 379           If you say yes here you get support for ADC on the Dialog
 380           Semiconductor DA9055 PMIC.
 381
 382           This driver can also be built as a module.  If so, the module
 383           will be called da9055-hwmon.
 384
 385 config SENSORS_I5K_AMB
 386         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 387         depends on PCI
 388         help
 389           If you say yes here you get support for FB-DIMM AMB temperature
 390           monitoring chips on systems with the Intel 5000 series chipset.
 391
 392           This driver can also be built as a module. If so, the module
 393           will be called i5k_amb.
 394
 395 config SENSORS_F71805F
 396         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 397         depends on !PPC
 398         help
 399           If you say yes here you get support for hardware monitoring
 400           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 401           Super-I/O chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called f71805f.
 405
 406 config SENSORS_F71882FG
 407         tristate "Fintek F71882FG and compatibles"
 408         depends on !PPC
 409         help
 410           If you say yes here you get support for hardware monitoring
 411           features of many Fintek Super-I/O (LPC) chips. The currently
 412           supported chips are:
 413             F71808E/A
 414             F71858FG
 415             F71862FG
 416             F71863FG
 417             F71869F/E/A
 418             F71882FG
 419             F71883FG
 420             F71889FG/ED/A
 421             F8000
 422             F81801U
 423             F81865F
 424
 425           This driver can also be built as a module.  If so, the module
 426           will be called f71882fg.
 427
 428 config SENSORS_F75375S
 429         tristate "Fintek F75375S/SP, F75373 and F75387"
 430         depends on I2C
 431         help
 432           If you say yes here you get support for hardware monitoring
 433           features of the Fintek F75375S/SP, F75373 and F75387
 434
 435           This driver can also be built as a module.  If so, the module
 436           will be called f75375s.
 437
 438 config SENSORS_FSCHMD
 439         tristate "Fujitsu Siemens Computers sensor chips"
 440         depends on X86 && I2C
 441         help
 442           If you say yes here you get support for the following Fujitsu
 443           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 444           Heimdall, Heracles, Hades and Syleus including support for the
 445           integrated watchdog.
 446
 447           This is a merged driver for FSC sensor chips replacing the fscpos,
 448           fscscy and fscher drivers and adding support for several other FSC
 449           sensor chips.
 450
 451           This driver can also be built as a module.  If so, the module
 452           will be called fschmd.
 453
 454 config SENSORS_G760A
 455         tristate "GMT G760A"
 456         depends on I2C
 457         help
 458           If you say yes here you get support for Global Mixed-mode
 459           Technology Inc G760A fan speed PWM controller chips.
 460
 461           This driver can also be built as a module.  If so, the module
 462           will be called g760a.
 463
 464 config SENSORS_G762
 465         tristate "GMT G762 and G763"
 466         depends on I2C
 467         help
 468           If you say yes here you get support for Global Mixed-mode
 469           Technology Inc G762 and G763 fan speed PWM controller chips.
 470
 471           This driver can also be built as a module.  If so, the module
 472           will be called g762.
 473
 474 config SENSORS_GL518SM
 475         tristate "Genesys Logic GL518SM"
 476         depends on I2C
 477         help
 478           If you say yes here you get support for Genesys Logic GL518SM
 479           sensor chips.
 480
 481           This driver can also be built as a module.  If so, the module
 482           will be called gl518sm.
 483
 484 config SENSORS_GL520SM
 485         tristate "Genesys Logic GL520SM"
 486         depends on I2C
 487         select HWMON_VID
 488         help
 489           If you say yes here you get support for Genesys Logic GL520SM
 490           sensor chips.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called gl520sm.
 494
 495 config SENSORS_GPIO_FAN
 496         tristate "GPIO fan"
 497         depends on GPIOLIB
 498         help
 499           If you say yes here you get support for fans connected to GPIO lines.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called gpio-fan.
 503
 504 config SENSORS_HIH6130
 505         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 506         depends on I2C
 507         help
 508           If you say yes here you get support for Honeywell Humidicon
 509           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 510
 511           This driver can also be built as a module.  If so, the module
 512           will be called hih6130.
 513
 514 config SENSORS_HTU21
 515         tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 516         depends on I2C
 517         help
 518           If you say yes here you get support for the Measurement Specialties
 519           HTU21D humidity and temperature sensors.
 520
 521           This driver can also be built as a module.  If so, the module
 522           will be called htu21.
 523
 524 config SENSORS_CORETEMP
 525         tristate "Intel Core/Core2/Atom temperature sensor"
 526         depends on X86
 527         help
 528           If you say yes here you get support for the temperature
 529           sensor inside your CPU. Most of the family 6 CPUs
 530           are supported. Check Documentation/hwmon/coretemp for details.
 531
 532 config SENSORS_IBMAEM
 533         tristate "IBM Active Energy Manager temperature/power sensors and control"
 534         select IPMI_SI
 535         depends on IPMI_HANDLER
 536         help
 537           If you say yes here you get support for the temperature and
 538           power sensors and capping hardware in various IBM System X
 539           servers that support Active Energy Manager.  This includes
 540           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 541           and certain HC10/HS2x/LS2x/QS2x blades.
 542
 543           This driver can also be built as a module.  If so, the module
 544           will be called ibmaem.
 545
 546 config SENSORS_IBMPEX
 547         tristate "IBM PowerExecutive temperature/power sensors"
 548         select IPMI_SI
 549         depends on IPMI_HANDLER
 550         help
 551           If you say yes here you get support for the temperature and
 552           power sensors in various IBM System X servers that support
 553           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 554           x3655, and x3755; the x3800, x3850, and x3950 models that have
 555           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 556
 557           This driver can also be built as a module.  If so, the module
 558           will be called ibmpex.
 559
 560 config SENSORS_IIO_HWMON
 561         tristate "Hwmon driver that uses channels specified via iio maps"
 562         depends on IIO
 563         help
 564           This is a platform driver that in combination with a suitable
 565           map allows IIO devices to provide basic hwmon functionality
 566           for those channels specified in the map.  This map can be provided
 567           either via platform data or the device tree bindings.
 568
 569 config SENSORS_IT87
 570         tristate "ITE IT87xx and compatibles"
 571         depends on !PPC
 572         select HWMON_VID
 573         help
 574           If you say yes here you get support for ITE IT8705F, IT8712F,
 575           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 576           IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 577           SiS950 clone.
 578
 579           This driver can also be built as a module.  If so, the module
 580           will be called it87.
 581
 582 config SENSORS_JZ4740
 583         tristate "Ingenic JZ4740 SoC ADC driver"
 584         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 585         help
 586           If you say yes here you get support for reading adc values from the ADCIN
 587           pin on Ingenic JZ4740 SoC based boards.
 588
 589           This driver can also be build as a module. If so, the module will be
 590           called jz4740-hwmon.
 591
 592 config SENSORS_JC42
 593         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 594         depends on I2C
 595         help
 596           If you say yes here, you get support for JEDEC JC42.4 compliant
 597           temperature sensors, which are used on many DDR3 memory modules for
 598           mobile devices and servers.  Support will include, but not be limited
 599           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 600           MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 601           STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 602
 603           This driver can also be built as a module.  If so, the module
 604           will be called jc42.
 605
 606 config SENSORS_LINEAGE
 607         tristate "Lineage Compact Power Line Power Entry Module"
 608         depends on I2C
 609         help
 610           If you say yes here you get support for the Lineage Compact Power Line
 611           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 612           CP2000DC, CP2725, and others.
 613
 614           This driver can also be built as a module.  If so, the module
 615           will be called lineage-pem.
 616
 617 config SENSORS_LM63
 618         tristate "National Semiconductor LM63 and compatibles"
 619         depends on I2C
 620         help
 621           If you say yes here you get support for the National
 622           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 623           sensors with integrated fan control.  Such chips are found
 624           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 625           others.
 626
 627           This driver can also be built as a module.  If so, the module
 628           will be called lm63.
 629
 630 config SENSORS_LM70
 631         tristate "National Semiconductor LM70 and compatibles"
 632         depends on SPI_MASTER
 633         help
 634           If you say yes here you get support for the National Semiconductor
 635           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 636           ture sensor chips.
 637
 638           This driver can also be built as a module.  If so, the module
 639           will be called lm70.
 640
 641 config SENSORS_LM73
 642         tristate "National Semiconductor LM73"
 643         depends on I2C
 644         help
 645           If you say yes here you get support for National Semiconductor LM73
 646           sensor chips.
 647           This driver can also be built as a module.  If so, the module
 648           will be called lm73.
 649
 650 config SENSORS_LM75
 651         tristate "National Semiconductor LM75 and compatibles"
 652         depends on I2C
 653         help
 654           If you say yes here you get support for one common type of
 655           temperature sensor chip, with models including:
 656
 657                 - Analog Devices ADT75
 658                 - Dallas Semiconductor DS75, DS1775 and DS7505
 659                 - Global Mixed-mode Technology (GMT) G751
 660                 - Maxim MAX6625 and MAX6626
 661                 - Microchip MCP980x
 662                 - National Semiconductor LM75, LM75A
 663                 - NXP's LM75A
 664                 - ST Microelectronics STDS75
 665                 - TelCom (now Microchip) TCN75
 666                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 667                   TMP275
 668
 669           This driver supports driver model based binding through board
 670           specific I2C device tables.
 671
 672           It also supports the "legacy" style of driver binding.  To use
 673           that with some chips which don't replicate LM75 quirks exactly,
 674           you may need the "force" module parameter.
 675
 676           This driver can also be built as a module.  If so, the module
 677           will be called lm75.
 678
 679 config SENSORS_LM77
 680         tristate "National Semiconductor LM77"
 681         depends on I2C
 682         help
 683           If you say yes here you get support for National Semiconductor LM77
 684           sensor chips.
 685
 686           This driver can also be built as a module.  If so, the module
 687           will be called lm77.
 688
 689 config SENSORS_LM78
 690         tristate "National Semiconductor LM78 and compatibles"
 691         depends on I2C
 692         select HWMON_VID
 693         help
 694           If you say yes here you get support for National Semiconductor LM78,
 695           LM78-J and LM79.
 696
 697           This driver can also be built as a module.  If so, the module
 698           will be called lm78.
 699
 700 config SENSORS_LM80
 701         tristate "National Semiconductor LM80 and LM96080"
 702         depends on I2C
 703         help
 704           If you say yes here you get support for National Semiconductor
 705           LM80 and LM96080 sensor chips.
 706
 707           This driver can also be built as a module.  If so, the module
 708           will be called lm80.
 709
 710 config SENSORS_LM83
 711         tristate "National Semiconductor LM83 and compatibles"
 712         depends on I2C
 713         help
 714           If you say yes here you get support for National Semiconductor
 715           LM82 and LM83 sensor chips.
 716
 717           This driver can also be built as a module.  If so, the module
 718           will be called lm83.
 719
 720 config SENSORS_LM85
 721         tristate "National Semiconductor LM85 and compatibles"
 722         depends on I2C
 723         select HWMON_VID
 724         help
 725           If you say yes here you get support for National Semiconductor LM85
 726           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 727           EMC6D101, EMC6D102, and EMC6D103.
 728
 729           This driver can also be built as a module.  If so, the module
 730           will be called lm85.
 731
 732 config SENSORS_LM87
 733         tristate "National Semiconductor LM87 and compatibles"
 734         depends on I2C
 735         select HWMON_VID
 736         help
 737           If you say yes here you get support for National Semiconductor LM87
 738           and Analog Devices ADM1024 sensor chips.
 739
 740           This driver can also be built as a module.  If so, the module
 741           will be called lm87.
 742
 743 config SENSORS_LM90
 744         tristate "National Semiconductor LM90 and compatibles"
 745         depends on I2C
 746         help
 747           If you say yes here you get support for National Semiconductor LM90,
 748           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 749           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 750           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 751           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 752           sensor chips.
 753
 754           This driver can also be built as a module.  If so, the module
 755           will be called lm90.
 756
 757 config SENSORS_LM92
 758         tristate "National Semiconductor LM92 and compatibles"
 759         depends on I2C
 760         help
 761           If you say yes here you get support for National Semiconductor LM92
 762           and Maxim MAX6635 sensor chips.
 763
 764           This driver can also be built as a module.  If so, the module
 765           will be called lm92.
 766
 767 config SENSORS_LM93
 768         tristate "National Semiconductor LM93 and compatibles"
 769         depends on I2C
 770         select HWMON_VID
 771         help
 772           If you say yes here you get support for National Semiconductor LM93,
 773           LM94, and compatible sensor chips.
 774
 775           This driver can also be built as a module.  If so, the module
 776           will be called lm93.
 777
 778 config SENSORS_LTC4151
 779         tristate "Linear Technology LTC4151"
 780         depends on I2C
 781         default n
 782         help
 783           If you say yes here you get support for Linear Technology LTC4151
 784           High Voltage I2C Current and Voltage Monitor interface.
 785
 786           This driver can also be built as a module. If so, the module will
 787           be called ltc4151.
 788
 789 config SENSORS_LTC4215
 790         tristate "Linear Technology LTC4215"
 791         depends on I2C
 792         default n
 793         help
 794           If you say yes here you get support for Linear Technology LTC4215
 795           Hot Swap Controller I2C interface.
 796
 797           This driver can also be built as a module. If so, the module will
 798           be called ltc4215.
 799
 800 config SENSORS_LTC4245
 801         tristate "Linear Technology LTC4245"
 802         depends on I2C
 803         default n
 804         help
 805           If you say yes here you get support for Linear Technology LTC4245
 806           Multiple Supply Hot Swap Controller I2C interface.
 807
 808           This driver can also be built as a module. If so, the module will
 809           be called ltc4245.
 810
 811 config SENSORS_LTC4261
 812         tristate "Linear Technology LTC4261"
 813         depends on I2C
 814         default n
 815         help
 816           If you say yes here you get support for Linear Technology LTC4261
 817           Negative Voltage Hot Swap Controller I2C interface.
 818
 819           This driver can also be built as a module. If so, the module will
 820           be called ltc4261.
 821
 822 config SENSORS_LM95234
 823         tristate "National Semiconductor LM95234"
 824         depends on I2C
 825         help
 826           If you say yes here you get support for the LM95234 temperature
 827           sensor.
 828
 829           This driver can also be built as a module.  If so, the module
 830           will be called lm95234.
 831
 832 config SENSORS_LM95241
 833         tristate "National Semiconductor LM95241 and compatibles"
 834         depends on I2C
 835         help
 836           If you say yes here you get support for LM95231 and LM95241 sensor
 837           chips.
 838
 839           This driver can also be built as a module.  If so, the module
 840           will be called lm95241.
 841
 842 config SENSORS_LM95245
 843         tristate "National Semiconductor LM95245 sensor chip"
 844         depends on I2C
 845         help
 846           If you say yes here you get support for LM95245 sensor chip.
 847
 848           This driver can also be built as a module.  If so, the module
 849           will be called lm95245.
 850
 851 config SENSORS_MAX1111
 852         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 853         depends on SPI_MASTER
 854         help
 855           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 856           ADC chips.
 857
 858           This driver can also be built as a module.  If so, the module
 859           will be called max1111.
 860
 861 config SENSORS_MAX16065
 862         tristate "Maxim MAX16065 System Manager and compatibles"
 863         depends on I2C
 864         help
 865           If you say yes here you get support for hardware monitoring
 866           capabilities of the following Maxim System Manager chips.
 867             MAX16065
 868             MAX16066
 869             MAX16067
 870             MAX16068
 871             MAX16070
 872             MAX16071
 873
 874           This driver can also be built as a module.  If so, the module
 875           will be called max16065.
 876
 877 config SENSORS_MAX1619
 878         tristate "Maxim MAX1619 sensor chip"
 879         depends on I2C
 880         help
 881           If you say yes here you get support for MAX1619 sensor chip.
 882
 883           This driver can also be built as a module.  If so, the module
 884           will be called max1619.
 885
 886 config SENSORS_MAX1668
 887         tristate "Maxim MAX1668 and compatibles"
 888         depends on I2C
 889         help
 890           If you say yes here you get support for MAX1668, MAX1989 and
 891           MAX1805 chips.
 892
 893           This driver can also be built as a module.  If so, the module
 894           will be called max1668.
 895
 896 config SENSORS_MAX197
 897         tristate "Maxim MAX197 and compatibles"
 898         help
 899           Support for the Maxim MAX197 A/D converter.
 900           Support will include, but not be limited to, MAX197, and MAX199.
 901
 902           This driver can also be built as a module. If so, the module
 903           will be called max197.
 904
 905 config SENSORS_MAX6639
 906         tristate "Maxim MAX6639 sensor chip"
 907         depends on I2C
 908         help
 909           If you say yes here you get support for the MAX6639
 910           sensor chips.
 911
 912           This driver can also be built as a module.  If so, the module
 913           will be called max6639.
 914
 915 config SENSORS_MAX6642
 916         tristate "Maxim MAX6642 sensor chip"
 917         depends on I2C
 918         help
 919           If you say yes here you get support for MAX6642 sensor chip.
 920           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 921           with Overtemperature Alarm from Maxim.
 922
 923           This driver can also be built as a module.  If so, the module
 924           will be called max6642.
 925
 926 config SENSORS_MAX6650
 927         tristate "Maxim MAX6650 sensor chip"
 928         depends on I2C
 929         help
 930           If you say yes here you get support for the MAX6650 / MAX6651
 931           sensor chips.
 932
 933           This driver can also be built as a module.  If so, the module
 934           will be called max6650.
 935
 936 config SENSORS_MAX6697
 937         tristate "Maxim MAX6697 and compatibles"
 938         depends on I2C
 939         help
 940           If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 941           MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 942           temperature sensor chips.
 943
 944           This driver can also be built as a module.  If so, the module
 945           will be called max6697.
 946
 947 config SENSORS_MCP3021
 948         tristate "Microchip MCP3021 and compatibles"
 949         depends on I2C
 950         help
 951           If you say yes here you get support for MCP3021 and MCP3221.
 952           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 953           with 12-bit resolution.
 954
 955           This driver can also be built as a module.  If so, the module
 956           will be called mcp3021.
 957
 958 config SENSORS_NCT6775
 959         tristate "Nuvoton NCT6775F and compatibles"
 960         depends on !PPC
 961         select HWMON_VID
 962         help
 963           If you say yes here you get support for the hardware monitoring
 964           functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
 965           and compatible Super-I/O chips. This driver replaces the
 966           w83627ehf driver for NCT6775F and NCT6776F.
 967
 968           This driver can also be built as a module.  If so, the module
 969           will be called nct6775.
 970
 971 config SENSORS_NTC_THERMISTOR
 972         tristate "NTC thermistor support"
 973         depends on (!OF && !IIO) || (OF && IIO)
 974         help
 975           This driver supports NTC thermistors sensor reading and its
 976           interpretation. The driver can also monitor the temperature and
 977           send notifications about the temperature.
 978
 979           Currently, this driver supports
 980           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 981
 982           This driver can also be built as a module.  If so, the module
 983           will be called ntc-thermistor.
 984
 985 config SENSORS_PC87360
 986         tristate "National Semiconductor PC87360 family"
 987         depends on !PPC
 988         select HWMON_VID
 989         help
 990           If you say yes here you get access to the hardware monitoring
 991           functions of the National Semiconductor PC8736x Super-I/O chips.
 992           The PC87360, PC87363 and PC87364 only have fan monitoring and
 993           control.  The PC87365 and PC87366 additionally have voltage and
 994           temperature monitoring.
 995
 996           This driver can also be built as a module.  If so, the module
 997           will be called pc87360.
 998
 999 config SENSORS_PC87427
1000         tristate "National Semiconductor PC87427"
1001         depends on !PPC
1002         help
1003           If you say yes here you get access to the hardware monitoring
1004           functions of the National Semiconductor PC87427 Super-I/O chip.
1005           The chip has two distinct logical devices, one for fan speed
1006           monitoring and control, and one for voltage and temperature
1007           monitoring. Fan speed monitoring and control are supported, as
1008           well as temperature monitoring. Voltages aren't supported yet.
1009
1010           This driver can also be built as a module.  If so, the module
1011           will be called pc87427.
1012
1013 config SENSORS_PCF8591
1014         tristate "Philips PCF8591 ADC/DAC"
1015         depends on I2C
1016         default n
1017         help
1018           If you say yes here you get support for Philips PCF8591 4-channel
1019           ADC, 1-channel DAC chips.
1020
1021           This driver can also be built as a module.  If so, the module
1022           will be called pcf8591.
1023
1024           These devices are hard to detect and rarely found on mainstream
1025           hardware.  If unsure, say N.
1026
1027 source drivers/hwmon/pmbus/Kconfig
1028
1029 config SENSORS_SHT15
1030         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1031         depends on GPIOLIB
1032         help
1033           If you say yes here you get support for the Sensiron SHT10, SHT11,
1034           SHT15, SHT71, SHT75 humidity and temperature sensors.
1035
1036           This driver can also be built as a module.  If so, the module
1037           will be called sht15.
1038
1039 config SENSORS_SHT21
1040         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1041         depends on I2C
1042         help
1043           If you say yes here you get support for the Sensiron SHT21, SHT25
1044           humidity and temperature sensors.
1045
1046           This driver can also be built as a module.  If so, the module
1047           will be called sht21.
1048
1049 config SENSORS_S3C
1050         tristate "Samsung built-in ADC"
1051         depends on S3C_ADC
1052         help
1053           If you say yes here you get support for the on-board ADCs of
1054           the Samsung S3C24XX, S3C64XX and other series of SoC
1055
1056           This driver can also be built as a module. If so, the module
1057           will be called s3c-hwmon.
1058
1059 config SENSORS_S3C_RAW
1060         bool "Include raw channel attributes in sysfs"
1061         depends on SENSORS_S3C
1062         help
1063           Say Y here if you want to include raw copies of all the ADC
1064           channels in sysfs.
1065
1066 config SENSORS_SIS5595
1067         tristate "Silicon Integrated Systems Corp. SiS5595"
1068         depends on PCI
1069         help
1070           If you say yes here you get support for the integrated sensors in
1071           SiS5595 South Bridges.
1072
1073           This driver can also be built as a module.  If so, the module
1074           will be called sis5595.
1075
1076 config SENSORS_SMM665
1077         tristate "Summit Microelectronics SMM665"
1078         depends on I2C
1079         default n
1080         help
1081           If you say yes here you get support for the hardware monitoring
1082           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1083           Active DC Output Controller / Monitor.
1084
1085           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1086           Support for those chips is untested.
1087
1088           This driver can also be built as a module. If so, the module will
1089           be called smm665.
1090
1091 config SENSORS_DME1737
1092         tristate "SMSC DME1737, SCH311x and compatibles"
1093         depends on I2C && !PPC
1094         select HWMON_VID
1095         help
1096           If you say yes here you get support for the hardware monitoring
1097           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1098           Asus A8000 Super-I/O chips.
1099
1100           This driver can also be built as a module.  If so, the module
1101           will be called dme1737.
1102
1103 config SENSORS_EMC1403
1104         tristate "SMSC EMC1403/23 thermal sensor"
1105         depends on I2C
1106         help
1107           If you say yes here you get support for the SMSC EMC1403/23
1108           temperature monitoring chip.
1109
1110           Threshold values can be configured using sysfs.
1111           Data from the different diodes are accessible via sysfs.
1112
1113 config SENSORS_EMC2103
1114         tristate "SMSC EMC2103"
1115         depends on I2C
1116         help
1117           If you say yes here you get support for the temperature
1118           and fan sensors of the SMSC EMC2103 chips.
1119
1120           This driver can also be built as a module.  If so, the module
1121           will be called emc2103.
1122
1123 config SENSORS_EMC6W201
1124         tristate "SMSC EMC6W201"
1125         depends on I2C
1126         help
1127           If you say yes here you get support for the SMSC EMC6W201
1128           hardware monitoring chip.
1129
1130           This driver can also be built as a module.  If so, the module
1131           will be called emc6w201.
1132
1133 config SENSORS_SMSC47M1
1134         tristate "SMSC LPC47M10x and compatibles"
1135         depends on !PPC
1136         help
1137           If you say yes here you get support for the integrated fan
1138           monitoring and control capabilities of the SMSC LPC47B27x,
1139           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1140           LPC47M192, LPC47M292 and LPC47M997 chips.
1141
1142           The temperature and voltage sensor features of the LPC47M15x,
1143           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1144           driver, select also "SMSC LPC47M192 and compatibles" below for
1145           those.
1146
1147           This driver can also be built as a module.  If so, the module
1148           will be called smsc47m1.
1149
1150 config SENSORS_SMSC47M192
1151         tristate "SMSC LPC47M192 and compatibles"
1152         depends on I2C
1153         select HWMON_VID
1154         help
1155           If you say yes here you get support for the temperature and
1156           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1157           and LPC47M997 chips.
1158
1159           The fan monitoring and control capabilities of these chips
1160           are supported by another driver, select
1161           "SMSC LPC47M10x and compatibles" above. You need both drivers
1162           if you want fan control and voltage/temperature sensor support.
1163
1164           This driver can also be built as a module.  If so, the module
1165           will be called smsc47m192.
1166
1167 config SENSORS_SMSC47B397
1168         tristate "SMSC LPC47B397-NC"
1169         depends on !PPC
1170         help
1171           If you say yes here you get support for the SMSC LPC47B397-NC
1172           sensor chip.
1173
1174           This driver can also be built as a module.  If so, the module
1175           will be called smsc47b397.
1176
1177 config SENSORS_SCH56XX_COMMON
1178         tristate
1179         default n
1180
1181 config SENSORS_SCH5627
1182         tristate "SMSC SCH5627"
1183         depends on !PPC && WATCHDOG
1184         select SENSORS_SCH56XX_COMMON
1185         select WATCHDOG_CORE
1186         help
1187           If you say yes here you get support for the hardware monitoring
1188           features of the SMSC SCH5627 Super-I/O chip including support for
1189           the integrated watchdog.
1190
1191           This driver can also be built as a module.  If so, the module
1192           will be called sch5627.
1193
1194 config SENSORS_SCH5636
1195         tristate "SMSC SCH5636"
1196         depends on !PPC && WATCHDOG
1197         select SENSORS_SCH56XX_COMMON
1198         select WATCHDOG_CORE
1199         help
1200           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1201           hardware monitoring solutions, allowing motherboard manufacturers to
1202           create their own custom hwmon solution based upon the SCH5636.
1203
1204           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1205           hwmon solution. Say yes here if you want support for the Fujitsu
1206           Theseus' hardware monitoring features including support for the
1207           integrated watchdog.
1208
1209           This driver can also be built as a module.  If so, the module
1210           will be called sch5636.
1211
1212 config SENSORS_ADS1015
1213         tristate "Texas Instruments ADS1015"
1214         depends on I2C
1215         help
1216           If you say yes here you get support for Texas Instruments
1217           ADS1015/ADS1115 12/16-bit 4-input ADC device.
1218
1219           This driver can also be built as a module.  If so, the module
1220           will be called ads1015.
1221
1222 config SENSORS_ADS7828
1223         tristate "Texas Instruments ADS7828 and compatibles"
1224         depends on I2C
1225         help
1226           If you say yes here you get support for Texas Instruments ADS7828 and
1227           ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1228           it is 8-bit on ADS7830.
1229
1230           This driver can also be built as a module.  If so, the module
1231           will be called ads7828.
1232
1233 config SENSORS_ADS7871
1234         tristate "Texas Instruments ADS7871 A/D converter"
1235         depends on SPI
1236         help
1237           If you say yes here you get support for TI ADS7871 & ADS7870
1238
1239           This driver can also be built as a module.  If so, the module
1240           will be called ads7871.
1241
1242 config SENSORS_AMC6821
1243         tristate "Texas Instruments AMC6821"
1244         depends on I2C
1245         help
1246           If you say yes here you get support for the Texas Instruments
1247           AMC6821 hardware monitoring chips.
1248
1249           This driver can also be build as a module.  If so, the module
1250           will be called amc6821.
1251
1252 config SENSORS_INA209
1253         tristate "TI / Burr Brown INA209"
1254         depends on I2C
1255         help
1256           If you say yes here you get support for the TI / Burr Brown INA209
1257           voltage / current / power monitor I2C interface.
1258
1259           This driver can also be built as a module. If so, the module will
1260           be called ina209.
1261
1262 config SENSORS_INA2XX
1263         tristate "Texas Instruments INA219 and compatibles"
1264         depends on I2C
1265         help
1266           If you say yes here you get support for INA219, INA220, INA226, and
1267           INA230 power monitor chips.
1268
1269           The INA2xx driver is configured for the default configuration of
1270           the part as described in the datasheet.
1271           Default value for Rshunt is 10 mOhms.
1272           This driver can also be built as a module.  If so, the module
1273           will be called ina2xx.
1274
1275 config SENSORS_THMC50
1276         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1277         depends on I2C
1278         help
1279           If you say yes here you get support for Texas Instruments THMC50
1280           sensor chips and clones: the Analog Devices ADM1022.
1281
1282           This driver can also be built as a module.  If so, the module
1283           will be called thmc50.
1284
1285 config SENSORS_TMP102
1286         tristate "Texas Instruments TMP102"
1287         depends on I2C
1288         help
1289           If you say yes here you get support for Texas Instruments TMP102
1290           sensor chips.
1291
1292           This driver can also be built as a module.  If so, the module
1293           will be called tmp102.
1294
1295 config SENSORS_TMP401
1296         tristate "Texas Instruments TMP401 and compatibles"
1297         depends on I2C
1298         help
1299           If you say yes here you get support for Texas Instruments TMP401,
1300           TMP411, TMP431, and TMP432 temperature sensor chips.
1301
1302           This driver can also be built as a module.  If so, the module
1303           will be called tmp401.
1304
1305 config SENSORS_TMP421
1306         tristate "Texas Instruments TMP421 and compatible"
1307         depends on I2C
1308         help
1309           If you say yes here you get support for Texas Instruments TMP421,
1310           TMP422 and TMP423 temperature sensor chips.
1311
1312           This driver can also be built as a module.  If so, the module
1313           will be called tmp421.
1314
1315 config SENSORS_TWL4030_MADC
1316         tristate "Texas Instruments TWL4030 MADC Hwmon"
1317         depends on TWL4030_MADC
1318         help
1319         If you say yes here you get hwmon support for triton
1320         TWL4030-MADC.
1321
1322         This driver can also be built as a module. If so it will be called
1323         twl4030-madc-hwmon.
1324
1325 config SENSORS_VEXPRESS
1326         tristate "Versatile Express"
1327         depends on VEXPRESS_CONFIG
1328         help
1329           This driver provides support for hardware sensors available on
1330           the ARM Ltd's Versatile Express platform. It can provide wide
1331           range of information like temperature, power, energy.
1332
1333 config SENSORS_VIA_CPUTEMP
1334         tristate "VIA CPU temperature sensor"
1335         depends on X86
1336         select HWMON_VID
1337         help
1338           If you say yes here you get support for the temperature
1339           sensor inside your CPU. Supported are all known variants of
1340           the VIA C7 and Nano.
1341
1342 config SENSORS_VIA686A
1343         tristate "VIA686A"
1344         depends on PCI
1345         help
1346           If you say yes here you get support for the integrated sensors in
1347           Via 686A/B South Bridges.
1348
1349           This driver can also be built as a module.  If so, the module
1350           will be called via686a.
1351
1352 config SENSORS_VT1211
1353         tristate "VIA VT1211"
1354         depends on !PPC
1355         select HWMON_VID
1356         help
1357           If you say yes here then you get support for hardware monitoring
1358           features of the VIA VT1211 Super-I/O chip.
1359
1360           This driver can also be built as a module.  If so, the module
1361           will be called vt1211.
1362
1363 config SENSORS_VT8231
1364         tristate "VIA VT8231"
1365         depends on PCI
1366         select HWMON_VID
1367         help
1368           If you say yes here then you get support for the integrated sensors
1369           in the VIA VT8231 device.
1370
1371           This driver can also be built as a module.  If so, the module
1372           will be called vt8231.
1373
1374 config SENSORS_W83781D
1375         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1376         depends on I2C
1377         select HWMON_VID
1378         help
1379           If you say yes here you get support for the Winbond W8378x series
1380           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1381           Asus AS99127F.
1382
1383           This driver can also be built as a module.  If so, the module
1384           will be called w83781d.
1385
1386 config SENSORS_W83791D
1387         tristate "Winbond W83791D"
1388         depends on I2C
1389         select HWMON_VID
1390         help
1391           If you say yes here you get support for the Winbond W83791D chip.
1392
1393           This driver can also be built as a module.  If so, the module
1394           will be called w83791d.
1395
1396 config SENSORS_W83792D
1397         tristate "Winbond W83792D"
1398         depends on I2C
1399         help
1400           If you say yes here you get support for the Winbond W83792D chip.
1401
1402           This driver can also be built as a module.  If so, the module
1403           will be called w83792d.
1404
1405 config SENSORS_W83793
1406         tristate "Winbond W83793"
1407         depends on I2C
1408         select HWMON_VID
1409         help
1410           If you say yes here you get support for the Winbond W83793
1411           hardware monitoring chip, including support for the integrated
1412           watchdog.
1413
1414           This driver can also be built as a module.  If so, the module
1415           will be called w83793.
1416
1417 config SENSORS_W83795
1418         tristate "Winbond/Nuvoton W83795G/ADG"
1419         depends on I2C
1420         help
1421           If you say yes here you get support for the Winbond W83795G and
1422           W83795ADG hardware monitoring chip, including manual fan speed
1423           control.
1424
1425           This driver can also be built as a module.  If so, the module
1426           will be called w83795.
1427
1428 config SENSORS_W83795_FANCTRL
1429         boolean "Include automatic fan control support (DANGEROUS)"
1430         depends on SENSORS_W83795
1431         default n
1432         help
1433           If you say yes here, support for automatic fan speed control
1434           will be included in the driver.
1435
1436           This part of the code wasn't carefully reviewed and tested yet,
1437           so enabling this option is strongly discouraged on production
1438           servers. Only developers and testers should enable it for the
1439           time being.
1440
1441           Please also note that this option will create sysfs attribute
1442           files which may change in the future, so you shouldn't rely
1443           on them being stable.
1444
1445 config SENSORS_W83L785TS
1446         tristate "Winbond W83L785TS-S"
1447         depends on I2C
1448         help
1449           If you say yes here you get support for the Winbond W83L785TS-S
1450           sensor chip, which is used on the Asus A7N8X, among other
1451           motherboards.
1452
1453           This driver can also be built as a module.  If so, the module
1454           will be called w83l785ts.
1455
1456 config SENSORS_W83L786NG
1457         tristate "Winbond W83L786NG, W83L786NR"
1458         depends on I2C
1459         help
1460           If you say yes here you get support for the Winbond W83L786NG
1461           and W83L786NR sensor chips.
1462
1463           This driver can also be built as a module.  If so, the module
1464           will be called w83l786ng.
1465
1466 config SENSORS_W83627HF
1467         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1468         depends on !PPC
1469         select HWMON_VID
1470         help
1471           If you say yes here you get support for the Winbond W836X7 series
1472           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1473           W83697HF.
1474
1475           This driver can also be built as a module.  If so, the module
1476           will be called w83627hf.
1477
1478 config SENSORS_W83627EHF
1479         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1480         depends on !PPC
1481         select HWMON_VID
1482         help
1483           If you say yes here you get support for the hardware
1484           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1485
1486           This driver also supports the W83627EHG, which is the lead-free
1487           version of the W83627EHF, and the W83627DHG, which is a similar
1488           chip suited for specific Intel processors that use PECI such as
1489           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1490           version of the W83627DHG (as far as hardware monitoring goes.)
1491
1492           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1493           (also known as W83667HG-I), and NCT6776F.
1494
1495           This driver can also be built as a module.  If so, the module
1496           will be called w83627ehf.
1497
1498 config SENSORS_WM831X
1499         tristate "WM831x PMICs"
1500         depends on MFD_WM831X
1501         help
1502           If you say yes here you get support for the hardware
1503           monitoring functionality of the Wolfson Microelectronics
1504           WM831x series of PMICs.
1505
1506           This driver can also be built as a module.  If so, the module
1507           will be called wm831x-hwmon.
1508
1509 config SENSORS_WM8350
1510         tristate "Wolfson Microelectronics WM835x"
1511         depends on MFD_WM8350
1512         help
1513           If you say yes here you get support for the hardware
1514           monitoring features of the WM835x series of PMICs.
1515
1516           This driver can also be built as a module.  If so, the module
1517           will be called wm8350-hwmon.
1518
1519 config SENSORS_ULTRA45
1520         tristate "Sun Ultra45 PIC16F747"
1521         depends on SPARC64
1522         help
1523           This driver provides support for the Ultra45 workstation environmental
1524           sensors.
1525
1526 config SENSORS_APPLESMC
1527         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1528         depends on INPUT && X86
1529         select NEW_LEDS
1530         select LEDS_CLASS
1531         select INPUT_POLLDEV
1532         default n
1533         help
1534           This driver provides support for the Apple System Management
1535           Controller, which provides an accelerometer (Apple Sudden Motion
1536           Sensor), light sensors, temperature sensors, keyboard backlight
1537           control and fan control.
1538
1539           Only Intel-based Apple's computers are supported (MacBook Pro,
1540           MacBook, MacMini).
1541
1542           Data from the different sensors, keyboard backlight control and fan
1543           control are accessible via sysfs.
1544
1545           This driver also provides an absolute input class device, allowing
1546           the laptop to act as a pinball machine-esque joystick.
1547
1548           Say Y here if you have an applicable laptop and want to experience
1549           the awesome power of applesmc.
1550
1551 config SENSORS_MC13783_ADC
1552         tristate "Freescale MC13783/MC13892 ADC"
1553         depends on MFD_MC13XXX
1554         help
1555           Support for the A/D converter on MC13783 and MC13892 PMIC.
1556
1557 if ACPI
1558
1559 comment "ACPI drivers"
1560
1561 config SENSORS_ACPI_POWER
1562         tristate "ACPI 4.0 power meter"
1563         help
1564           This driver exposes ACPI 4.0 power meters as hardware monitoring
1565           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1566           and a power meter.
1567
1568           To compile this driver as a module, choose M here:
1569           the module will be called acpi_power_meter.
1570
1571 config SENSORS_ATK0110
1572         tristate "ASUS ATK0110"
1573         depends on X86
1574         help
1575           If you say yes here you get support for the ACPI hardware
1576           monitoring interface found in many ASUS motherboards. This
1577           driver will provide readings of fans, voltages and temperatures
1578           through the system firmware.
1579
1580           This driver can also be built as a module. If so, the module
1581           will be called asus_atk0110.
1582
1583 endif # ACPI
1584
1585 endif # HWMON