drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_AB8500
  43         tristate "AB8500 thermal monitoring"
  44         depends on AB8500_GPADC && AB8500_BM
  45         default n
  46         help
  47           If you say yes here you get support for the thermal sensor part
  48           of the AB8500 chip. The driver includes thermal management for
  49           AB8500 die and two GPADC channels. The GPADC channel are preferably
  50           used to access sensors outside the AB8500 chip.
  51
  52           This driver can also be built as a module.  If so, the module
  53           will be called abx500-temp.
  54
  55 config SENSORS_ABITUGURU
  56         tristate "Abit uGuru (rev 1 & 2)"
  57         depends on X86 && DMI
  58         help
  59           If you say yes here you get support for the sensor part of the first
  60           and second revision of the Abit uGuru chip. The voltage and frequency
  61           control parts of the Abit uGuru are not supported. The Abit uGuru
  62           chip can be found on Abit uGuru featuring motherboards (most modern
  63           Abit motherboards from before end 2005). For more info and a list
  64           of which motherboards have which revision see
  65           Documentation/hwmon/abituguru
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called abituguru.
  69
  70 config SENSORS_ABITUGURU3
  71         tristate "Abit uGuru (rev 3)"
  72         depends on X86 && DMI
  73         help
  74           If you say yes here you get support for the sensor part of the
  75           third revision of the Abit uGuru chip. Only reading the sensors
  76           and their settings is supported. The third revision of the Abit
  77           uGuru chip can be found on recent Abit motherboards (since end
  78           2005). For more info and a list of which motherboards have which
  79           revision see Documentation/hwmon/abituguru3
  80
  81           This driver can also be built as a module.  If so, the module
  82           will be called abituguru3.
  83
  84 config SENSORS_AD7314
  85         tristate "Analog Devices AD7314 and compatibles"
  86         depends on SPI
  87         help
  88           If you say yes here you get support for the Analog Devices
  89           AD7314, ADT7301 and ADT7302 temperature sensors.
  90
  91           This driver can also be built as a module. If so, the module
  92           will be called ad7314.
  93
  94 config SENSORS_AD7414
  95         tristate "Analog Devices AD7414"
  96         depends on I2C
  97         help
  98           If you say yes here you get support for the Analog Devices
  99           AD7414 temperature monitoring chip.
 100
 101           This driver can also be built as a module. If so, the module
 102           will be called ad7414.
 103
 104 config SENSORS_AD7418
 105         tristate "Analog Devices AD7416, AD7417 and AD7418"
 106         depends on I2C
 107         help
 108           If you say yes here you get support for the Analog Devices
 109           AD7416, AD7417 and AD7418 temperature monitoring chips.
 110
 111           This driver can also be built as a module. If so, the module
 112           will be called ad7418.
 113
 114 config SENSORS_ADCXX
 115         tristate "National Semiconductor ADCxxxSxxx"
 116         depends on SPI_MASTER
 117         help
 118           If you say yes here you get support for the National Semiconductor
 119           ADC<bb><c>S<sss> chip family, where
 120           * bb  is the resolution in number of bits (8, 10, 12)
 121           * c   is the number of channels (1, 2, 4, 8)
 122           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 123             kSPS and 101 for 1 MSPS)
 124
 125           Examples : ADC081S101, ADC124S501, ...
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adcxx.
 129
 130 config SENSORS_ADM1021
 131         tristate "Analog Devices ADM1021 and compatibles"
 132         depends on I2C
 133         help
 134           If you say yes here you get support for Analog Devices ADM1021
 135           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 136           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1021.
 140
 141 config SENSORS_ADM1025
 142         tristate "Analog Devices ADM1025 and compatibles"
 143         depends on I2C
 144         select HWMON_VID
 145         help
 146           If you say yes here you get support for Analog Devices ADM1025
 147           and Philips NE1619 sensor chips.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1025.
 151
 152 config SENSORS_ADM1026
 153         tristate "Analog Devices ADM1026 and compatibles"
 154         depends on I2C
 155         select HWMON_VID
 156         help
 157           If you say yes here you get support for Analog Devices ADM1026
 158           sensor chip.
 159
 160           This driver can also be built as a module.  If so, the module
 161           will be called adm1026.
 162
 163 config SENSORS_ADM1029
 164         tristate "Analog Devices ADM1029"
 165         depends on I2C
 166         help
 167           If you say yes here you get support for Analog Devices ADM1029
 168           sensor chip.
 169           Very rare chip, please let us know you use it.
 170
 171           This driver can also be built as a module.  If so, the module
 172           will be called adm1029.
 173
 174 config SENSORS_ADM1031
 175         tristate "Analog Devices ADM1031 and compatibles"
 176         depends on I2C
 177         help
 178           If you say yes here you get support for Analog Devices ADM1031
 179           and ADM1030 sensor chips.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called adm1031.
 183
 184 config SENSORS_ADM9240
 185         tristate "Analog Devices ADM9240 and compatibles"
 186         depends on I2C
 187         select HWMON_VID
 188         help
 189           If you say yes here you get support for Analog Devices ADM9240,
 190           Dallas DS1780, National Semiconductor LM81 sensor chips.
 191
 192           This driver can also be built as a module.  If so, the module
 193           will be called adm9240.
 194
 195 config SENSORS_ADT7X10
 196         tristate
 197         help
 198           This module contains common code shared by the ADT7310/ADT7320 and
 199           ADT7410/ADT7420 temperature monitoring chip drivers.
 200
 201           If build as a module, the module will be called adt7x10.
 202
 203 config SENSORS_ADT7310
 204         tristate "Analog Devices ADT7310/ADT7320"
 205         depends on SPI_MASTER
 206         select SENSORS_ADT7X10
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7310 and ADT7320 temperature monitoring chips.
 210
 211           This driver can also be built as a module. If so, the module
 212           will be called adt7310.
 213
 214 config SENSORS_ADT7410
 215         tristate "Analog Devices ADT7410/ADT7420"
 216         depends on I2C
 217         select SENSORS_ADT7X10
 218         help
 219           If you say yes here you get support for the Analog Devices
 220           ADT7410 and ADT7420 temperature monitoring chips.
 221
 222           This driver can also be built as a module. If so, the module
 223           will be called adt7410.
 224
 225 config SENSORS_ADT7411
 226         tristate "Analog Devices ADT7411"
 227         depends on I2C
 228         help
 229           If you say yes here you get support for the Analog Devices
 230           ADT7411 voltage and temperature monitoring chip.
 231
 232           This driver can also be built as a module. If so, the module
 233           will be called adt7411.
 234
 235 config SENSORS_ADT7462
 236         tristate "Analog Devices ADT7462"
 237         depends on I2C
 238         help
 239           If you say yes here you get support for the Analog Devices
 240           ADT7462 temperature monitoring chips.
 241
 242           This driver can also be built as a module. If so, the module
 243           will be called adt7462.
 244
 245 config SENSORS_ADT7470
 246         tristate "Analog Devices ADT7470"
 247         depends on I2C
 248         help
 249           If you say yes here you get support for the Analog Devices
 250           ADT7470 temperature monitoring chips.
 251
 252           This driver can also be built as a module. If so, the module
 253           will be called adt7470.
 254
 255 config SENSORS_ADT7475
 256         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 257         depends on I2C
 258         select HWMON_VID
 259         help
 260           If you say yes here you get support for the Analog Devices
 261           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 262           chips.
 263
 264           This driver can also be build as a module.  If so, the module
 265           will be called adt7475.
 266
 267 config SENSORS_ASC7621
 268         tristate "Andigilog aSC7621"
 269         depends on I2C
 270         help
 271           If you say yes here you get support for the aSC7621
 272           family of SMBus sensors chip found on most Intel X38, X48, X58,
 273           945, 965 and 975 desktop boards.  Currently supported chips:
 274           aSC7621
 275           aSC7621a
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called asc7621.
 279
 280 config SENSORS_K8TEMP
 281         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 282         depends on X86 && PCI
 283         help
 284           If you say yes here you get support for the temperature
 285           sensor(s) inside your CPU. Supported is whole AMD K8
 286           microarchitecture. Please note that you will need at least
 287           lm-sensors 2.10.1 for proper userspace support.
 288
 289           This driver can also be built as a module.  If so, the module
 290           will be called k8temp.
 291
 292 config SENSORS_K10TEMP
 293         tristate "AMD Family 10h+ temperature sensor"
 294         depends on X86 && PCI
 295         help
 296           If you say yes here you get support for the temperature
 297           sensor(s) inside your CPU. Supported are later revisions of
 298           the AMD Family 10h and all revisions of the AMD Family 11h,
 299           12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
 300           16h (Kabini) microarchitectures.
 301
 302           This driver can also be built as a module.  If so, the module
 303           will be called k10temp.
 304
 305 config SENSORS_FAM15H_POWER
 306         tristate "AMD Family 15h processor power"
 307         depends on X86 && PCI
 308         help
 309           If you say yes here you get support for processor power
 310           information of your AMD family 15h CPU.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called fam15h_power.
 314
 315 config SENSORS_ASB100
 316         tristate "Asus ASB100 Bach"
 317         depends on X86 && I2C
 318         select HWMON_VID
 319         help
 320           If you say yes here you get support for the ASB100 Bach sensor
 321           chip found on some Asus mainboards.
 322
 323           This driver can also be built as a module.  If so, the module
 324           will be called asb100.
 325
 326 config SENSORS_ATXP1
 327         tristate "Attansic ATXP1 VID controller"
 328         depends on I2C
 329         select HWMON_VID
 330         help
 331           If you say yes here you get support for the Attansic ATXP1 VID
 332           controller.
 333
 334           If your board have such a chip, you are able to control your CPU
 335           core and other voltages.
 336
 337           This driver can also be built as a module.  If so, the module
 338           will be called atxp1.
 339
 340 config SENSORS_DS620
 341         tristate "Dallas Semiconductor DS620"
 342         depends on I2C
 343         help
 344           If you say yes here you get support for Dallas Semiconductor
 345           DS620 sensor chip.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called ds620.
 349
 350 config SENSORS_DS1621
 351         tristate "Dallas Semiconductor DS1621 and compatibles"
 352         depends on I2C
 353         help
 354           If you say yes here you get support for Dallas Semiconductor/Maxim
 355           Integrated DS1621 sensor chips and compatible models including:
 356
 357           - Dallas Semiconductor DS1625
 358           - Maxim Integrated DS1631
 359           - Maxim Integrated DS1721
 360           - Maxim Integrated DS1731
 361
 362           This driver can also be built as a module.  If so, the module
 363           will be called ds1621.
 364
 365 config SENSORS_DA9052_ADC
 366         tristate "Dialog DA9052/DA9053 ADC"
 367         depends on PMIC_DA9052
 368         help
 369           Say y here to support the ADC found on Dialog Semiconductor
 370           DA9052-BC and DA9053-AA/Bx PMICs.
 371
 372           This driver can also be built as module. If so, the module
 373           will be called da9052-hwmon.
 374
 375 config SENSORS_DA9055
 376         tristate "Dialog Semiconductor DA9055 ADC"
 377         depends on MFD_DA9055
 378         help
 379           If you say yes here you get support for ADC on the Dialog
 380           Semiconductor DA9055 PMIC.
 381
 382           This driver can also be built as a module.  If so, the module
 383           will be called da9055-hwmon.
 384
 385 config SENSORS_I5K_AMB
 386         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 387         depends on PCI
 388         help
 389           If you say yes here you get support for FB-DIMM AMB temperature
 390           monitoring chips on systems with the Intel 5000 series chipset.
 391
 392           This driver can also be built as a module. If so, the module
 393           will be called i5k_amb.
 394
 395 config SENSORS_F71805F
 396         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 397         depends on !PPC
 398         help
 399           If you say yes here you get support for hardware monitoring
 400           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 401           Super-I/O chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called f71805f.
 405
 406 config SENSORS_F71882FG
 407         tristate "Fintek F71882FG and compatibles"
 408         depends on !PPC
 409         help
 410           If you say yes here you get support for hardware monitoring
 411           features of many Fintek Super-I/O (LPC) chips. The currently
 412           supported chips are:
 413             F71808E/A
 414             F71858FG
 415             F71862FG
 416             F71863FG
 417             F71869F/E/A
 418             F71882FG
 419             F71883FG
 420             F71889FG/ED/A
 421             F8000
 422             F81801U
 423             F81865F
 424
 425           This driver can also be built as a module.  If so, the module
 426           will be called f71882fg.
 427
 428 config SENSORS_F75375S
 429         tristate "Fintek F75375S/SP, F75373 and F75387"
 430         depends on I2C
 431         help
 432           If you say yes here you get support for hardware monitoring
 433           features of the Fintek F75375S/SP, F75373 and F75387
 434
 435           This driver can also be built as a module.  If so, the module
 436           will be called f75375s.
 437
 438 config SENSORS_FSCHMD
 439         tristate "Fujitsu Siemens Computers sensor chips"
 440         depends on X86 && I2C
 441         help
 442           If you say yes here you get support for the following Fujitsu
 443           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 444           Heimdall, Heracles, Hades and Syleus including support for the
 445           integrated watchdog.
 446
 447           This is a merged driver for FSC sensor chips replacing the fscpos,
 448           fscscy and fscher drivers and adding support for several other FSC
 449           sensor chips.
 450
 451           This driver can also be built as a module.  If so, the module
 452           will be called fschmd.
 453
 454 config SENSORS_G760A
 455         tristate "GMT G760A"
 456         depends on I2C
 457         help
 458           If you say yes here you get support for Global Mixed-mode
 459           Technology Inc G760A fan speed PWM controller chips.
 460
 461           This driver can also be built as a module.  If so, the module
 462           will be called g760a.
 463
 464 config SENSORS_G762
 465         tristate "GMT G762 and G763"
 466         depends on I2C
 467         help
 468           If you say yes here you get support for Global Mixed-mode
 469           Technology Inc G762 and G763 fan speed PWM controller chips.
 470
 471           This driver can also be built as a module.  If so, the module
 472           will be called g762.
 473
 474 config SENSORS_GL518SM
 475         tristate "Genesys Logic GL518SM"
 476         depends on I2C
 477         help
 478           If you say yes here you get support for Genesys Logic GL518SM
 479           sensor chips.
 480
 481           This driver can also be built as a module.  If so, the module
 482           will be called gl518sm.
 483
 484 config SENSORS_GL520SM
 485         tristate "Genesys Logic GL520SM"
 486         depends on I2C
 487         select HWMON_VID
 488         help
 489           If you say yes here you get support for Genesys Logic GL520SM
 490           sensor chips.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called gl520sm.
 494
 495 config SENSORS_GPIO_FAN
 496         tristate "GPIO fan"
 497         depends on GPIOLIB
 498         help
 499           If you say yes here you get support for fans connected to GPIO lines.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called gpio-fan.
 503
 504 config SENSORS_HIH6130
 505         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 506         depends on I2C
 507         help
 508           If you say yes here you get support for Honeywell Humidicon
 509           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 510
 511           This driver can also be built as a module.  If so, the module
 512           will be called hih6130.
 513
 514 config SENSORS_HTU21
 515         tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 516         depends on I2C
 517         help
 518           If you say yes here you get support for the Measurement Specialties
 519           HTU21D humidity and temperature sensors.
 520
 521           This driver can also be built as a module.  If so, the module
 522           will be called htu21.
 523
 524 config SENSORS_CORETEMP
 525         tristate "Intel Core/Core2/Atom temperature sensor"
 526         depends on X86
 527         help
 528           If you say yes here you get support for the temperature
 529           sensor inside your CPU. Most of the family 6 CPUs
 530           are supported. Check Documentation/hwmon/coretemp for details.
 531
 532 config SENSORS_IBMAEM
 533         tristate "IBM Active Energy Manager temperature/power sensors and control"
 534         select IPMI_SI
 535         depends on IPMI_HANDLER
 536         help
 537           If you say yes here you get support for the temperature and
 538           power sensors and capping hardware in various IBM System X
 539           servers that support Active Energy Manager.  This includes
 540           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 541           and certain HC10/HS2x/LS2x/QS2x blades.
 542
 543           This driver can also be built as a module.  If so, the module
 544           will be called ibmaem.
 545
 546 config SENSORS_IBMPEX
 547         tristate "IBM PowerExecutive temperature/power sensors"
 548         select IPMI_SI
 549         depends on IPMI_HANDLER
 550         help
 551           If you say yes here you get support for the temperature and
 552           power sensors in various IBM System X servers that support
 553           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 554           x3655, and x3755; the x3800, x3850, and x3950 models that have
 555           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 556
 557           This driver can also be built as a module.  If so, the module
 558           will be called ibmpex.
 559
 560 config SENSORS_IIO_HWMON
 561         tristate "Hwmon driver that uses channels specified via iio maps"
 562         depends on IIO
 563         help
 564           This is a platform driver that in combination with a suitable
 565           map allows IIO devices to provide basic hwmon functionality
 566           for those channels specified in the map.  This map can be provided
 567           either via platform data or the device tree bindings.
 568
 569 config SENSORS_IT87
 570         tristate "ITE IT87xx and compatibles"
 571         depends on !PPC
 572         select HWMON_VID
 573         help
 574           If you say yes here you get support for ITE IT8705F, IT8712F,
 575           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 576           IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
 577           and the SiS950 clone.
 578
 579           This driver can also be built as a module.  If so, the module
 580           will be called it87.
 581
 582 config SENSORS_JZ4740
 583         tristate "Ingenic JZ4740 SoC ADC driver"
 584         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 585         help
 586           If you say yes here you get support for reading adc values from the ADCIN
 587           pin on Ingenic JZ4740 SoC based boards.
 588
 589           This driver can also be build as a module. If so, the module will be
 590           called jz4740-hwmon.
 591
 592 config SENSORS_JC42
 593         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 594         depends on I2C
 595         help
 596           If you say yes here, you get support for JEDEC JC42.4 compliant
 597           temperature sensors, which are used on many DDR3 memory modules for
 598           mobile devices and servers.  Support will include, but not be limited
 599           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 600           MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 601           STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 602
 603           This driver can also be built as a module.  If so, the module
 604           will be called jc42.
 605
 606 config SENSORS_LINEAGE
 607         tristate "Lineage Compact Power Line Power Entry Module"
 608         depends on I2C
 609         help
 610           If you say yes here you get support for the Lineage Compact Power Line
 611           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 612           CP2000DC, CP2725, and others.
 613
 614           This driver can also be built as a module.  If so, the module
 615           will be called lineage-pem.
 616
 617 config SENSORS_LM63
 618         tristate "National Semiconductor LM63 and compatibles"
 619         depends on I2C
 620         help
 621           If you say yes here you get support for the National
 622           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 623           sensors with integrated fan control.  Such chips are found
 624           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 625           others.
 626
 627           This driver can also be built as a module.  If so, the module
 628           will be called lm63.
 629
 630 config SENSORS_LM70
 631         tristate "National Semiconductor LM70 and compatibles"
 632         depends on SPI_MASTER
 633         help
 634           If you say yes here you get support for the National Semiconductor
 635           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 636           ture sensor chips.
 637
 638           This driver can also be built as a module.  If so, the module
 639           will be called lm70.
 640
 641 config SENSORS_LM73
 642         tristate "National Semiconductor LM73"
 643         depends on I2C
 644         help
 645           If you say yes here you get support for National Semiconductor LM73
 646           sensor chips.
 647           This driver can also be built as a module.  If so, the module
 648           will be called lm73.
 649
 650 config SENSORS_LM75
 651         tristate "National Semiconductor LM75 and compatibles"
 652         depends on I2C
 653         depends on THERMAL || !THERMAL_OF
 654         help
 655           If you say yes here you get support for one common type of
 656           temperature sensor chip, with models including:
 657
 658                 - Analog Devices ADT75
 659                 - Dallas Semiconductor DS75, DS1775 and DS7505
 660                 - Global Mixed-mode Technology (GMT) G751
 661                 - Maxim MAX6625 and MAX6626
 662                 - Microchip MCP980x
 663                 - National Semiconductor LM75, LM75A
 664                 - NXP's LM75A
 665                 - ST Microelectronics STDS75
 666                 - TelCom (now Microchip) TCN75
 667                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 668                   TMP275
 669
 670           This driver supports driver model based binding through board
 671           specific I2C device tables.
 672
 673           It also supports the "legacy" style of driver binding.  To use
 674           that with some chips which don't replicate LM75 quirks exactly,
 675           you may need the "force" module parameter.
 676
 677           This driver can also be built as a module.  If so, the module
 678           will be called lm75.
 679
 680 config SENSORS_LM77
 681         tristate "National Semiconductor LM77"
 682         depends on I2C
 683         help
 684           If you say yes here you get support for National Semiconductor LM77
 685           sensor chips.
 686
 687           This driver can also be built as a module.  If so, the module
 688           will be called lm77.
 689
 690 config SENSORS_LM78
 691         tristate "National Semiconductor LM78 and compatibles"
 692         depends on I2C
 693         select HWMON_VID
 694         help
 695           If you say yes here you get support for National Semiconductor LM78,
 696           LM78-J and LM79.
 697
 698           This driver can also be built as a module.  If so, the module
 699           will be called lm78.
 700
 701 config SENSORS_LM80
 702         tristate "National Semiconductor LM80 and LM96080"
 703         depends on I2C
 704         help
 705           If you say yes here you get support for National Semiconductor
 706           LM80 and LM96080 sensor chips.
 707
 708           This driver can also be built as a module.  If so, the module
 709           will be called lm80.
 710
 711 config SENSORS_LM83
 712         tristate "National Semiconductor LM83 and compatibles"
 713         depends on I2C
 714         help
 715           If you say yes here you get support for National Semiconductor
 716           LM82 and LM83 sensor chips.
 717
 718           This driver can also be built as a module.  If so, the module
 719           will be called lm83.
 720
 721 config SENSORS_LM85
 722         tristate "National Semiconductor LM85 and compatibles"
 723         depends on I2C
 724         select HWMON_VID
 725         help
 726           If you say yes here you get support for National Semiconductor LM85
 727           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 728           EMC6D101, EMC6D102, and EMC6D103.
 729
 730           This driver can also be built as a module.  If so, the module
 731           will be called lm85.
 732
 733 config SENSORS_LM87
 734         tristate "National Semiconductor LM87 and compatibles"
 735         depends on I2C
 736         select HWMON_VID
 737         help
 738           If you say yes here you get support for National Semiconductor LM87
 739           and Analog Devices ADM1024 sensor chips.
 740
 741           This driver can also be built as a module.  If so, the module
 742           will be called lm87.
 743
 744 config SENSORS_LM90
 745         tristate "National Semiconductor LM90 and compatibles"
 746         depends on I2C
 747         help
 748           If you say yes here you get support for National Semiconductor LM90,
 749           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 750           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 751           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 752           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 753           sensor chips.
 754
 755           This driver can also be built as a module.  If so, the module
 756           will be called lm90.
 757
 758 config SENSORS_LM92
 759         tristate "National Semiconductor LM92 and compatibles"
 760         depends on I2C
 761         help
 762           If you say yes here you get support for National Semiconductor LM92
 763           and Maxim MAX6635 sensor chips.
 764
 765           This driver can also be built as a module.  If so, the module
 766           will be called lm92.
 767
 768 config SENSORS_LM93
 769         tristate "National Semiconductor LM93 and compatibles"
 770         depends on I2C
 771         select HWMON_VID
 772         help
 773           If you say yes here you get support for National Semiconductor LM93,
 774           LM94, and compatible sensor chips.
 775
 776           This driver can also be built as a module.  If so, the module
 777           will be called lm93.
 778
 779 config SENSORS_LTC4151
 780         tristate "Linear Technology LTC4151"
 781         depends on I2C
 782         default n
 783         help
 784           If you say yes here you get support for Linear Technology LTC4151
 785           High Voltage I2C Current and Voltage Monitor interface.
 786
 787           This driver can also be built as a module. If so, the module will
 788           be called ltc4151.
 789
 790 config SENSORS_LTC4215
 791         tristate "Linear Technology LTC4215"
 792         depends on I2C
 793         default n
 794         help
 795           If you say yes here you get support for Linear Technology LTC4215
 796           Hot Swap Controller I2C interface.
 797
 798           This driver can also be built as a module. If so, the module will
 799           be called ltc4215.
 800
 801 config SENSORS_LTC4245
 802         tristate "Linear Technology LTC4245"
 803         depends on I2C
 804         default n
 805         help
 806           If you say yes here you get support for Linear Technology LTC4245
 807           Multiple Supply Hot Swap Controller I2C interface.
 808
 809           This driver can also be built as a module. If so, the module will
 810           be called ltc4245.
 811
 812 config SENSORS_LTC4261
 813         tristate "Linear Technology LTC4261"
 814         depends on I2C
 815         default n
 816         help
 817           If you say yes here you get support for Linear Technology LTC4261
 818           Negative Voltage Hot Swap Controller I2C interface.
 819
 820           This driver can also be built as a module. If so, the module will
 821           be called ltc4261.
 822
 823 config SENSORS_LM95234
 824         tristate "National Semiconductor LM95234"
 825         depends on I2C
 826         help
 827           If you say yes here you get support for the LM95234 temperature
 828           sensor.
 829
 830           This driver can also be built as a module.  If so, the module
 831           will be called lm95234.
 832
 833 config SENSORS_LM95241
 834         tristate "National Semiconductor LM95241 and compatibles"
 835         depends on I2C
 836         help
 837           If you say yes here you get support for LM95231 and LM95241 sensor
 838           chips.
 839
 840           This driver can also be built as a module.  If so, the module
 841           will be called lm95241.
 842
 843 config SENSORS_LM95245
 844         tristate "National Semiconductor LM95245 sensor chip"
 845         depends on I2C
 846         help
 847           If you say yes here you get support for LM95245 sensor chip.
 848
 849           This driver can also be built as a module.  If so, the module
 850           will be called lm95245.
 851
 852 config SENSORS_MAX1111
 853         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 854         depends on SPI_MASTER
 855         help
 856           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 857           ADC chips.
 858
 859           This driver can also be built as a module.  If so, the module
 860           will be called max1111.
 861
 862 config SENSORS_MAX16065
 863         tristate "Maxim MAX16065 System Manager and compatibles"
 864         depends on I2C
 865         help
 866           If you say yes here you get support for hardware monitoring
 867           capabilities of the following Maxim System Manager chips.
 868             MAX16065
 869             MAX16066
 870             MAX16067
 871             MAX16068
 872             MAX16070
 873             MAX16071
 874
 875           This driver can also be built as a module.  If so, the module
 876           will be called max16065.
 877
 878 config SENSORS_MAX1619
 879         tristate "Maxim MAX1619 sensor chip"
 880         depends on I2C
 881         help
 882           If you say yes here you get support for MAX1619 sensor chip.
 883
 884           This driver can also be built as a module.  If so, the module
 885           will be called max1619.
 886
 887 config SENSORS_MAX1668
 888         tristate "Maxim MAX1668 and compatibles"
 889         depends on I2C
 890         help
 891           If you say yes here you get support for MAX1668, MAX1989 and
 892           MAX1805 chips.
 893
 894           This driver can also be built as a module.  If so, the module
 895           will be called max1668.
 896
 897 config SENSORS_MAX197
 898         tristate "Maxim MAX197 and compatibles"
 899         help
 900           Support for the Maxim MAX197 A/D converter.
 901           Support will include, but not be limited to, MAX197, and MAX199.
 902
 903           This driver can also be built as a module. If so, the module
 904           will be called max197.
 905
 906 config SENSORS_MAX6639
 907         tristate "Maxim MAX6639 sensor chip"
 908         depends on I2C
 909         help
 910           If you say yes here you get support for the MAX6639
 911           sensor chips.
 912
 913           This driver can also be built as a module.  If so, the module
 914           will be called max6639.
 915
 916 config SENSORS_MAX6642
 917         tristate "Maxim MAX6642 sensor chip"
 918         depends on I2C
 919         help
 920           If you say yes here you get support for MAX6642 sensor chip.
 921           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 922           with Overtemperature Alarm from Maxim.
 923
 924           This driver can also be built as a module.  If so, the module
 925           will be called max6642.
 926
 927 config SENSORS_MAX6650
 928         tristate "Maxim MAX6650 sensor chip"
 929         depends on I2C
 930         help
 931           If you say yes here you get support for the MAX6650 / MAX6651
 932           sensor chips.
 933
 934           This driver can also be built as a module.  If so, the module
 935           will be called max6650.
 936
 937 config SENSORS_MAX6697
 938         tristate "Maxim MAX6697 and compatibles"
 939         depends on I2C
 940         help
 941           If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 942           MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 943           temperature sensor chips.
 944
 945           This driver can also be built as a module.  If so, the module
 946           will be called max6697.
 947
 948 config SENSORS_MCP3021
 949         tristate "Microchip MCP3021 and compatibles"
 950         depends on I2C
 951         help
 952           If you say yes here you get support for MCP3021 and MCP3221.
 953           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 954           with 12-bit resolution.
 955
 956           This driver can also be built as a module.  If so, the module
 957           will be called mcp3021.
 958
 959 config SENSORS_NCT6775
 960         tristate "Nuvoton NCT6775F and compatibles"
 961         depends on !PPC
 962         select HWMON_VID
 963         help
 964           If you say yes here you get support for the hardware monitoring
 965           functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
 966           and compatible Super-I/O chips. This driver replaces the
 967           w83627ehf driver for NCT6775F and NCT6776F.
 968
 969           This driver can also be built as a module.  If so, the module
 970           will be called nct6775.
 971
 972 config SENSORS_NTC_THERMISTOR
 973         tristate "NTC thermistor support"
 974         depends on (!OF && !IIO) || (OF && IIO)
 975         help
 976           This driver supports NTC thermistors sensor reading and its
 977           interpretation. The driver can also monitor the temperature and
 978           send notifications about the temperature.
 979
 980           Currently, this driver supports
 981           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 982
 983           This driver can also be built as a module.  If so, the module
 984           will be called ntc-thermistor.
 985
 986 config SENSORS_PC87360
 987         tristate "National Semiconductor PC87360 family"
 988         depends on !PPC
 989         select HWMON_VID
 990         help
 991           If you say yes here you get access to the hardware monitoring
 992           functions of the National Semiconductor PC8736x Super-I/O chips.
 993           The PC87360, PC87363 and PC87364 only have fan monitoring and
 994           control.  The PC87365 and PC87366 additionally have voltage and
 995           temperature monitoring.
 996
 997           This driver can also be built as a module.  If so, the module
 998           will be called pc87360.
 999
1000 config SENSORS_PC87427
1001         tristate "National Semiconductor PC87427"
1002         depends on !PPC
1003         help
1004           If you say yes here you get access to the hardware monitoring
1005           functions of the National Semiconductor PC87427 Super-I/O chip.
1006           The chip has two distinct logical devices, one for fan speed
1007           monitoring and control, and one for voltage and temperature
1008           monitoring. Fan speed monitoring and control are supported, as
1009           well as temperature monitoring. Voltages aren't supported yet.
1010
1011           This driver can also be built as a module.  If so, the module
1012           will be called pc87427.
1013
1014 config SENSORS_PCF8591
1015         tristate "Philips PCF8591 ADC/DAC"
1016         depends on I2C
1017         default n
1018         help
1019           If you say yes here you get support for Philips PCF8591 4-channel
1020           ADC, 1-channel DAC chips.
1021
1022           This driver can also be built as a module.  If so, the module
1023           will be called pcf8591.
1024
1025           These devices are hard to detect and rarely found on mainstream
1026           hardware.  If unsure, say N.
1027
1028 source drivers/hwmon/pmbus/Kconfig
1029
1030 config SENSORS_SHT15
1031         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1032         depends on GPIOLIB
1033         help
1034           If you say yes here you get support for the Sensiron SHT10, SHT11,
1035           SHT15, SHT71, SHT75 humidity and temperature sensors.
1036
1037           This driver can also be built as a module.  If so, the module
1038           will be called sht15.
1039
1040 config SENSORS_SHT21
1041         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1042         depends on I2C
1043         help
1044           If you say yes here you get support for the Sensiron SHT21, SHT25
1045           humidity and temperature sensors.
1046
1047           This driver can also be built as a module.  If so, the module
1048           will be called sht21.
1049
1050 config SENSORS_S3C
1051         tristate "Samsung built-in ADC"
1052         depends on S3C_ADC
1053         help
1054           If you say yes here you get support for the on-board ADCs of
1055           the Samsung S3C24XX, S3C64XX and other series of SoC
1056
1057           This driver can also be built as a module. If so, the module
1058           will be called s3c-hwmon.
1059
1060 config SENSORS_S3C_RAW
1061         bool "Include raw channel attributes in sysfs"
1062         depends on SENSORS_S3C
1063         help
1064           Say Y here if you want to include raw copies of all the ADC
1065           channels in sysfs.
1066
1067 config SENSORS_SIS5595
1068         tristate "Silicon Integrated Systems Corp. SiS5595"
1069         depends on PCI
1070         help
1071           If you say yes here you get support for the integrated sensors in
1072           SiS5595 South Bridges.
1073
1074           This driver can also be built as a module.  If so, the module
1075           will be called sis5595.
1076
1077 config SENSORS_SMM665
1078         tristate "Summit Microelectronics SMM665"
1079         depends on I2C
1080         default n
1081         help
1082           If you say yes here you get support for the hardware monitoring
1083           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1084           Active DC Output Controller / Monitor.
1085
1086           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1087           Support for those chips is untested.
1088
1089           This driver can also be built as a module. If so, the module will
1090           be called smm665.
1091
1092 config SENSORS_DME1737
1093         tristate "SMSC DME1737, SCH311x and compatibles"
1094         depends on I2C && !PPC
1095         select HWMON_VID
1096         help
1097           If you say yes here you get support for the hardware monitoring
1098           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1099           Asus A8000 Super-I/O chips.
1100
1101           This driver can also be built as a module.  If so, the module
1102           will be called dme1737.
1103
1104 config SENSORS_EMC1403
1105         tristate "SMSC EMC1403/23 thermal sensor"
1106         depends on I2C
1107         help
1108           If you say yes here you get support for the SMSC EMC1403/23
1109           temperature monitoring chip.
1110
1111           Threshold values can be configured using sysfs.
1112           Data from the different diodes are accessible via sysfs.
1113
1114 config SENSORS_EMC2103
1115         tristate "SMSC EMC2103"
1116         depends on I2C
1117         help
1118           If you say yes here you get support for the temperature
1119           and fan sensors of the SMSC EMC2103 chips.
1120
1121           This driver can also be built as a module.  If so, the module
1122           will be called emc2103.
1123
1124 config SENSORS_EMC6W201
1125         tristate "SMSC EMC6W201"
1126         depends on I2C
1127         help
1128           If you say yes here you get support for the SMSC EMC6W201
1129           hardware monitoring chip.
1130
1131           This driver can also be built as a module.  If so, the module
1132           will be called emc6w201.
1133
1134 config SENSORS_SMSC47M1
1135         tristate "SMSC LPC47M10x and compatibles"
1136         depends on !PPC
1137         help
1138           If you say yes here you get support for the integrated fan
1139           monitoring and control capabilities of the SMSC LPC47B27x,
1140           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1141           LPC47M192, LPC47M292 and LPC47M997 chips.
1142
1143           The temperature and voltage sensor features of the LPC47M15x,
1144           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1145           driver, select also "SMSC LPC47M192 and compatibles" below for
1146           those.
1147
1148           This driver can also be built as a module.  If so, the module
1149           will be called smsc47m1.
1150
1151 config SENSORS_SMSC47M192
1152         tristate "SMSC LPC47M192 and compatibles"
1153         depends on I2C
1154         select HWMON_VID
1155         help
1156           If you say yes here you get support for the temperature and
1157           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1158           and LPC47M997 chips.
1159
1160           The fan monitoring and control capabilities of these chips
1161           are supported by another driver, select
1162           "SMSC LPC47M10x and compatibles" above. You need both drivers
1163           if you want fan control and voltage/temperature sensor support.
1164
1165           This driver can also be built as a module.  If so, the module
1166           will be called smsc47m192.
1167
1168 config SENSORS_SMSC47B397
1169         tristate "SMSC LPC47B397-NC"
1170         depends on !PPC
1171         help
1172           If you say yes here you get support for the SMSC LPC47B397-NC
1173           sensor chip.
1174
1175           This driver can also be built as a module.  If so, the module
1176           will be called smsc47b397.
1177
1178 config SENSORS_SCH56XX_COMMON
1179         tristate
1180         default n
1181
1182 config SENSORS_SCH5627
1183         tristate "SMSC SCH5627"
1184         depends on !PPC && WATCHDOG
1185         select SENSORS_SCH56XX_COMMON
1186         select WATCHDOG_CORE
1187         help
1188           If you say yes here you get support for the hardware monitoring
1189           features of the SMSC SCH5627 Super-I/O chip including support for
1190           the integrated watchdog.
1191
1192           This driver can also be built as a module.  If so, the module
1193           will be called sch5627.
1194
1195 config SENSORS_SCH5636
1196         tristate "SMSC SCH5636"
1197         depends on !PPC && WATCHDOG
1198         select SENSORS_SCH56XX_COMMON
1199         select WATCHDOG_CORE
1200         help
1201           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1202           hardware monitoring solutions, allowing motherboard manufacturers to
1203           create their own custom hwmon solution based upon the SCH5636.
1204
1205           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1206           hwmon solution. Say yes here if you want support for the Fujitsu
1207           Theseus' hardware monitoring features including support for the
1208           integrated watchdog.
1209
1210           This driver can also be built as a module.  If so, the module
1211           will be called sch5636.
1212
1213 config SENSORS_ADS1015
1214         tristate "Texas Instruments ADS1015"
1215         depends on I2C
1216         help
1217           If you say yes here you get support for Texas Instruments
1218           ADS1015/ADS1115 12/16-bit 4-input ADC device.
1219
1220           This driver can also be built as a module.  If so, the module
1221           will be called ads1015.
1222
1223 config SENSORS_ADS7828
1224         tristate "Texas Instruments ADS7828 and compatibles"
1225         depends on I2C
1226         help
1227           If you say yes here you get support for Texas Instruments ADS7828 and
1228           ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1229           it is 8-bit on ADS7830.
1230
1231           This driver can also be built as a module.  If so, the module
1232           will be called ads7828.
1233
1234 config SENSORS_ADS7871
1235         tristate "Texas Instruments ADS7871 A/D converter"
1236         depends on SPI
1237         help
1238           If you say yes here you get support for TI ADS7871 & ADS7870
1239
1240           This driver can also be built as a module.  If so, the module
1241           will be called ads7871.
1242
1243 config SENSORS_AMC6821
1244         tristate "Texas Instruments AMC6821"
1245         depends on I2C
1246         help
1247           If you say yes here you get support for the Texas Instruments
1248           AMC6821 hardware monitoring chips.
1249
1250           This driver can also be build as a module.  If so, the module
1251           will be called amc6821.
1252
1253 config SENSORS_INA209
1254         tristate "TI / Burr Brown INA209"
1255         depends on I2C
1256         help
1257           If you say yes here you get support for the TI / Burr Brown INA209
1258           voltage / current / power monitor I2C interface.
1259
1260           This driver can also be built as a module. If so, the module will
1261           be called ina209.
1262
1263 config SENSORS_INA2XX
1264         tristate "Texas Instruments INA219 and compatibles"
1265         depends on I2C
1266         help
1267           If you say yes here you get support for INA219, INA220, INA226, and
1268           INA230 power monitor chips.
1269
1270           The INA2xx driver is configured for the default configuration of
1271           the part as described in the datasheet.
1272           Default value for Rshunt is 10 mOhms.
1273           This driver can also be built as a module.  If so, the module
1274           will be called ina2xx.
1275
1276 config SENSORS_THMC50
1277         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1278         depends on I2C
1279         help
1280           If you say yes here you get support for Texas Instruments THMC50
1281           sensor chips and clones: the Analog Devices ADM1022.
1282
1283           This driver can also be built as a module.  If so, the module
1284           will be called thmc50.
1285
1286 config SENSORS_TMP102
1287         tristate "Texas Instruments TMP102"
1288         depends on I2C
1289         depends on THERMAL || !THERMAL_OF
1290         help
1291           If you say yes here you get support for Texas Instruments TMP102
1292           sensor chips.
1293
1294           This driver can also be built as a module.  If so, the module
1295           will be called tmp102.
1296
1297 config SENSORS_TMP401
1298         tristate "Texas Instruments TMP401 and compatibles"
1299         depends on I2C
1300         help
1301           If you say yes here you get support for Texas Instruments TMP401,
1302           TMP411, TMP431, and TMP432 temperature sensor chips.
1303
1304           This driver can also be built as a module.  If so, the module
1305           will be called tmp401.
1306
1307 config SENSORS_TMP421
1308         tristate "Texas Instruments TMP421 and compatible"
1309         depends on I2C
1310         help
1311           If you say yes here you get support for Texas Instruments TMP421,
1312           TMP422 and TMP423 temperature sensor chips.
1313
1314           This driver can also be built as a module.  If so, the module
1315           will be called tmp421.
1316
1317 config SENSORS_TWL4030_MADC
1318         tristate "Texas Instruments TWL4030 MADC Hwmon"
1319         depends on TWL4030_MADC
1320         help
1321         If you say yes here you get hwmon support for triton
1322         TWL4030-MADC.
1323
1324         This driver can also be built as a module. If so it will be called
1325         twl4030-madc-hwmon.
1326
1327 config SENSORS_VEXPRESS
1328         tristate "Versatile Express"
1329         depends on VEXPRESS_CONFIG
1330         help
1331           This driver provides support for hardware sensors available on
1332           the ARM Ltd's Versatile Express platform. It can provide wide
1333           range of information like temperature, power, energy.
1334
1335 config SENSORS_VIA_CPUTEMP
1336         tristate "VIA CPU temperature sensor"
1337         depends on X86
1338         select HWMON_VID
1339         help
1340           If you say yes here you get support for the temperature
1341           sensor inside your CPU. Supported are all known variants of
1342           the VIA C7 and Nano.
1343
1344 config SENSORS_VIA686A
1345         tristate "VIA686A"
1346         depends on PCI
1347         help
1348           If you say yes here you get support for the integrated sensors in
1349           Via 686A/B South Bridges.
1350
1351           This driver can also be built as a module.  If so, the module
1352           will be called via686a.
1353
1354 config SENSORS_VT1211
1355         tristate "VIA VT1211"
1356         depends on !PPC
1357         select HWMON_VID
1358         help
1359           If you say yes here then you get support for hardware monitoring
1360           features of the VIA VT1211 Super-I/O chip.
1361
1362           This driver can also be built as a module.  If so, the module
1363           will be called vt1211.
1364
1365 config SENSORS_VT8231
1366         tristate "VIA VT8231"
1367         depends on PCI
1368         select HWMON_VID
1369         help
1370           If you say yes here then you get support for the integrated sensors
1371           in the VIA VT8231 device.
1372
1373           This driver can also be built as a module.  If so, the module
1374           will be called vt8231.
1375
1376 config SENSORS_W83781D
1377         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1378         depends on I2C
1379         select HWMON_VID
1380         help
1381           If you say yes here you get support for the Winbond W8378x series
1382           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1383           Asus AS99127F.
1384
1385           This driver can also be built as a module.  If so, the module
1386           will be called w83781d.
1387
1388 config SENSORS_W83791D
1389         tristate "Winbond W83791D"
1390         depends on I2C
1391         select HWMON_VID
1392         help
1393           If you say yes here you get support for the Winbond W83791D chip.
1394
1395           This driver can also be built as a module.  If so, the module
1396           will be called w83791d.
1397
1398 config SENSORS_W83792D
1399         tristate "Winbond W83792D"
1400         depends on I2C
1401         help
1402           If you say yes here you get support for the Winbond W83792D chip.
1403
1404           This driver can also be built as a module.  If so, the module
1405           will be called w83792d.
1406
1407 config SENSORS_W83793
1408         tristate "Winbond W83793"
1409         depends on I2C
1410         select HWMON_VID
1411         help
1412           If you say yes here you get support for the Winbond W83793
1413           hardware monitoring chip, including support for the integrated
1414           watchdog.
1415
1416           This driver can also be built as a module.  If so, the module
1417           will be called w83793.
1418
1419 config SENSORS_W83795
1420         tristate "Winbond/Nuvoton W83795G/ADG"
1421         depends on I2C
1422         help
1423           If you say yes here you get support for the Winbond W83795G and
1424           W83795ADG hardware monitoring chip, including manual fan speed
1425           control.
1426
1427           This driver can also be built as a module.  If so, the module
1428           will be called w83795.
1429
1430 config SENSORS_W83795_FANCTRL
1431         boolean "Include automatic fan control support (DANGEROUS)"
1432         depends on SENSORS_W83795
1433         default n
1434         help
1435           If you say yes here, support for automatic fan speed control
1436           will be included in the driver.
1437
1438           This part of the code wasn't carefully reviewed and tested yet,
1439           so enabling this option is strongly discouraged on production
1440           servers. Only developers and testers should enable it for the
1441           time being.
1442
1443           Please also note that this option will create sysfs attribute
1444           files which may change in the future, so you shouldn't rely
1445           on them being stable.
1446
1447 config SENSORS_W83L785TS
1448         tristate "Winbond W83L785TS-S"
1449         depends on I2C
1450         help
1451           If you say yes here you get support for the Winbond W83L785TS-S
1452           sensor chip, which is used on the Asus A7N8X, among other
1453           motherboards.
1454
1455           This driver can also be built as a module.  If so, the module
1456           will be called w83l785ts.
1457
1458 config SENSORS_W83L786NG
1459         tristate "Winbond W83L786NG, W83L786NR"
1460         depends on I2C
1461         help
1462           If you say yes here you get support for the Winbond W83L786NG
1463           and W83L786NR sensor chips.
1464
1465           This driver can also be built as a module.  If so, the module
1466           will be called w83l786ng.
1467
1468 config SENSORS_W83627HF
1469         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1470         depends on !PPC
1471         select HWMON_VID
1472         help
1473           If you say yes here you get support for the Winbond W836X7 series
1474           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1475           W83697HF.
1476
1477           This driver can also be built as a module.  If so, the module
1478           will be called w83627hf.
1479
1480 config SENSORS_W83627EHF
1481         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1482         depends on !PPC
1483         select HWMON_VID
1484         help
1485           If you say yes here you get support for the hardware
1486           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1487
1488           This driver also supports the W83627EHG, which is the lead-free
1489           version of the W83627EHF, and the W83627DHG, which is a similar
1490           chip suited for specific Intel processors that use PECI such as
1491           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1492           version of the W83627DHG (as far as hardware monitoring goes.)
1493
1494           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1495           (also known as W83667HG-I), and NCT6776F.
1496
1497           This driver can also be built as a module.  If so, the module
1498           will be called w83627ehf.
1499
1500 config SENSORS_WM831X
1501         tristate "WM831x PMICs"
1502         depends on MFD_WM831X
1503         help
1504           If you say yes here you get support for the hardware
1505           monitoring functionality of the Wolfson Microelectronics
1506           WM831x series of PMICs.
1507
1508           This driver can also be built as a module.  If so, the module
1509           will be called wm831x-hwmon.
1510
1511 config SENSORS_WM8350
1512         tristate "Wolfson Microelectronics WM835x"
1513         depends on MFD_WM8350
1514         help
1515           If you say yes here you get support for the hardware
1516           monitoring features of the WM835x series of PMICs.
1517
1518           This driver can also be built as a module.  If so, the module
1519           will be called wm8350-hwmon.
1520
1521 config SENSORS_ULTRA45
1522         tristate "Sun Ultra45 PIC16F747"
1523         depends on SPARC64
1524         help
1525           This driver provides support for the Ultra45 workstation environmental
1526           sensors.
1527
1528 config SENSORS_APPLESMC
1529         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1530         depends on INPUT && X86
1531         select NEW_LEDS
1532         select LEDS_CLASS
1533         select INPUT_POLLDEV
1534         default n
1535         help
1536           This driver provides support for the Apple System Management
1537           Controller, which provides an accelerometer (Apple Sudden Motion
1538           Sensor), light sensors, temperature sensors, keyboard backlight
1539           control and fan control.
1540
1541           Only Intel-based Apple's computers are supported (MacBook Pro,
1542           MacBook, MacMini).
1543
1544           Data from the different sensors, keyboard backlight control and fan
1545           control are accessible via sysfs.
1546
1547           This driver also provides an absolute input class device, allowing
1548           the laptop to act as a pinball machine-esque joystick.
1549
1550           Say Y here if you have an applicable laptop and want to experience
1551           the awesome power of applesmc.
1552
1553 config SENSORS_MC13783_ADC
1554         tristate "Freescale MC13783/MC13892 ADC"
1555         depends on MFD_MC13XXX
1556         help
1557           Support for the A/D converter on MC13783 and MC13892 PMIC.
1558
1559 if ACPI
1560
1561 comment "ACPI drivers"
1562
1563 config SENSORS_ACPI_POWER
1564         tristate "ACPI 4.0 power meter"
1565         help
1566           This driver exposes ACPI 4.0 power meters as hardware monitoring
1567           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1568           and a power meter.
1569
1570           To compile this driver as a module, choose M here:
1571           the module will be called acpi_power_meter.
1572
1573 config SENSORS_ATK0110
1574         tristate "ASUS ATK0110"
1575         depends on X86
1576         help
1577           If you say yes here you get support for the ACPI hardware
1578           monitoring interface found in many ASUS motherboards. This
1579           driver will provide readings of fans, voltages and temperatures
1580           through the system firmware.
1581
1582           This driver can also be built as a module. If so, the module
1583           will be called asus_atk0110.
1584
1585 endif # ACPI
1586
1587 endif # HWMON