drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
 114           and the XEON processor built-in sensor.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called adm1021.
 118
 119 config SENSORS_ADM1025
 120         tristate "Analog Devices ADM1025 and compatibles"
 121         depends on I2C
 122         select HWMON_VID
 123         help
 124           If you say yes here you get support for Analog Devices ADM1025
 125           and Philips NE1619 sensor chips.
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adm1025.
 129
 130 config SENSORS_ADM1026
 131         tristate "Analog Devices ADM1026 and compatibles"
 132         depends on I2C
 133         select HWMON_VID
 134         help
 135           If you say yes here you get support for Analog Devices ADM1026
 136           sensor chip.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1026.
 140
 141 config SENSORS_ADM1029
 142         tristate "Analog Devices ADM1029"
 143         depends on I2C
 144         help
 145           If you say yes here you get support for Analog Devices ADM1029
 146           sensor chip.
 147           Very rare chip, please let us know you use it.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1029.
 151
 152 config SENSORS_ADM1031
 153         tristate "Analog Devices ADM1031 and compatibles"
 154         depends on I2C
 155         help
 156           If you say yes here you get support for Analog Devices ADM1031
 157           and ADM1030 sensor chips.
 158
 159           This driver can also be built as a module.  If so, the module
 160           will be called adm1031.
 161
 162 config SENSORS_ADM9240
 163         tristate "Analog Devices ADM9240 and compatibles"
 164         depends on I2C
 165         select HWMON_VID
 166         help
 167           If you say yes here you get support for Analog Devices ADM9240,
 168           Dallas DS1780, National Semiconductor LM81 sensor chips.
 169
 170           This driver can also be built as a module.  If so, the module
 171           will be called adm9240.
 172
 173 config SENSORS_ADT7411
 174         tristate "Analog Devices ADT7411"
 175         depends on I2C && EXPERIMENTAL
 176         help
 177           If you say yes here you get support for the Analog Devices
 178           ADT7411 voltage and temperature monitoring chip.
 179
 180           This driver can also be built as a module. If so, the module
 181           will be called adt7411.
 182
 183 config SENSORS_ADT7462
 184         tristate "Analog Devices ADT7462"
 185         depends on I2C && EXPERIMENTAL
 186         help
 187           If you say yes here you get support for the Analog Devices
 188           ADT7462 temperature monitoring chips.
 189
 190           This driver can also be built as a module. If so, the module
 191           will be called adt7462.
 192
 193 config SENSORS_ADT7470
 194         tristate "Analog Devices ADT7470"
 195         depends on I2C && EXPERIMENTAL
 196         help
 197           If you say yes here you get support for the Analog Devices
 198           ADT7470 temperature monitoring chips.
 199
 200           This driver can also be built as a module. If so, the module
 201           will be called adt7470.
 202
 203 config SENSORS_ADT7475
 204         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 205         depends on I2C
 206         select HWMON_VID
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 210           chips.
 211
 212           This driver can also be build as a module.  If so, the module
 213           will be called adt7475.
 214
 215 config SENSORS_ASC7621
 216         tristate "Andigilog aSC7621"
 217         depends on HWMON && I2C
 218         help
 219           If you say yes here you get support for the aSC7621
 220           family of SMBus sensors chip found on most Intel X38, X48, X58,
 221           945, 965 and 975 desktop boards.  Currently supported chips:
 222           aSC7621
 223           aSC7621a
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called asc7621.
 227
 228 config SENSORS_K8TEMP
 229         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 230         depends on X86 && PCI && EXPERIMENTAL
 231         help
 232           If you say yes here you get support for the temperature
 233           sensor(s) inside your CPU. Supported is whole AMD K8
 234           microarchitecture. Please note that you will need at least
 235           lm-sensors 2.10.1 for proper userspace support.
 236
 237           This driver can also be built as a module.  If so, the module
 238           will be called k8temp.
 239
 240 config SENSORS_K10TEMP
 241         tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 242         depends on X86 && PCI
 243         help
 244           If you say yes here you get support for the temperature
 245           sensor(s) inside your CPU. Supported are later revisions of
 246           the AMD Family 10h and all revisions of the AMD Family 11h,
 247           12h (Llano), and 14h (Brazos) microarchitectures.
 248
 249           This driver can also be built as a module.  If so, the module
 250           will be called k10temp.
 251
 252 config SENSORS_ASB100
 253         tristate "Asus ASB100 Bach"
 254         depends on X86 && I2C && EXPERIMENTAL
 255         select HWMON_VID
 256         help
 257           If you say yes here you get support for the ASB100 Bach sensor
 258           chip found on some Asus mainboards.
 259
 260           This driver can also be built as a module.  If so, the module
 261           will be called asb100.
 262
 263 config SENSORS_ATXP1
 264         tristate "Attansic ATXP1 VID controller"
 265         depends on I2C && EXPERIMENTAL
 266         select HWMON_VID
 267         help
 268           If you say yes here you get support for the Attansic ATXP1 VID
 269           controller.
 270
 271           If your board have such a chip, you are able to control your CPU
 272           core and other voltages.
 273
 274           This driver can also be built as a module.  If so, the module
 275           will be called atxp1.
 276
 277 config SENSORS_DS620
 278         tristate "Dallas Semiconductor DS620"
 279         depends on I2C
 280         help
 281           If you say yes here you get support for Dallas Semiconductor
 282           DS620 sensor chip.
 283
 284           This driver can also be built as a module.  If so, the module
 285           will be called ds620.
 286
 287 config SENSORS_DS1621
 288         tristate "Dallas Semiconductor DS1621 and DS1625"
 289         depends on I2C
 290         help
 291           If you say yes here you get support for Dallas Semiconductor
 292           DS1621 and DS1625 sensor chips.
 293
 294           This driver can also be built as a module.  If so, the module
 295           will be called ds1621.
 296
 297 config SENSORS_I5K_AMB
 298         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 299         depends on PCI && EXPERIMENTAL
 300         help
 301           If you say yes here you get support for FB-DIMM AMB temperature
 302           monitoring chips on systems with the Intel 5000 series chipset.
 303
 304           This driver can also be built as a module. If so, the module
 305           will be called i5k_amb.
 306
 307 config SENSORS_F71805F
 308         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 309         help
 310           If you say yes here you get support for hardware monitoring
 311           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 312           Super-I/O chips.
 313
 314           This driver can also be built as a module.  If so, the module
 315           will be called f71805f.
 316
 317 config SENSORS_F71882FG
 318         tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
 319         help
 320           If you say yes here you get support for hardware monitoring
 321           features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
 322           F71889FG and F8000 Super-I/O chips.
 323
 324           This driver can also be built as a module.  If so, the module
 325           will be called f71882fg.
 326
 327 config SENSORS_F75375S
 328         tristate "Fintek F75375S/SP and F75373"
 329         depends on I2C
 330         help
 331           If you say yes here you get support for hardware monitoring
 332           features of the Fintek F75375S/SP and F75373
 333
 334           This driver can also be built as a module.  If so, the module
 335           will be called f75375s.
 336
 337 config SENSORS_FSCHMD
 338         tristate "Fujitsu Siemens Computers sensor chips"
 339         depends on X86 && I2C
 340         help
 341           If you say yes here you get support for the following Fujitsu
 342           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 343           Heimdall, Heracles, Hades and Syleus including support for the
 344           integrated watchdog.
 345
 346           This is a merged driver for FSC sensor chips replacing the fscpos,
 347           fscscy and fscher drivers and adding support for several other FSC
 348           sensor chips.
 349
 350           This driver can also be built as a module.  If so, the module
 351           will be called fschmd.
 352
 353 config SENSORS_G760A
 354         tristate "GMT G760A"
 355         depends on I2C
 356         help
 357           If you say yes here you get support for Global Mixed-mode
 358           Technology Inc G760A fan speed PWM controller chips.
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called g760a.
 362
 363 config SENSORS_GL518SM
 364         tristate "Genesys Logic GL518SM"
 365         depends on I2C
 366         help
 367           If you say yes here you get support for Genesys Logic GL518SM
 368           sensor chips.
 369
 370           This driver can also be built as a module.  If so, the module
 371           will be called gl518sm.
 372
 373 config SENSORS_GL520SM
 374         tristate "Genesys Logic GL520SM"
 375         depends on I2C
 376         select HWMON_VID
 377         help
 378           If you say yes here you get support for Genesys Logic GL520SM
 379           sensor chips.
 380
 381           This driver can also be built as a module.  If so, the module
 382           will be called gl520sm.
 383
 384 config SENSORS_GPIO_FAN
 385         tristate "GPIO fan"
 386         depends on GENERIC_GPIO
 387         help
 388           If you say yes here you get support for fans connected to GPIO lines.
 389
 390           This driver can also be built as a module.  If so, the module
 391           will be called gpio-fan.
 392
 393 config SENSORS_CORETEMP
 394         tristate "Intel Core/Core2/Atom temperature sensor"
 395         depends on X86 && PCI && EXPERIMENTAL
 396         help
 397           If you say yes here you get support for the temperature
 398           sensor inside your CPU. Most of the family 6 CPUs
 399           are supported. Check Documentation/hwmon/coretemp for details.
 400
 401 config SENSORS_PKGTEMP
 402         tristate "Intel processor package temperature sensor"
 403         depends on X86 && EXPERIMENTAL
 404         help
 405           If you say yes here you get support for the package level temperature
 406           sensor inside your CPU. Check documentation/driver for details.
 407
 408 config SENSORS_IBMAEM
 409         tristate "IBM Active Energy Manager temperature/power sensors and control"
 410         select IPMI_SI
 411         depends on IPMI_HANDLER
 412         help
 413           If you say yes here you get support for the temperature and
 414           power sensors and capping hardware in various IBM System X
 415           servers that support Active Energy Manager.  This includes
 416           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 417           and certain HC10/HS2x/LS2x/QS2x blades.
 418
 419           This driver can also be built as a module.  If so, the module
 420           will be called ibmaem.
 421
 422 config SENSORS_IBMPEX
 423         tristate "IBM PowerExecutive temperature/power sensors"
 424         select IPMI_SI
 425         depends on IPMI_HANDLER
 426         help
 427           If you say yes here you get support for the temperature and
 428           power sensors in various IBM System X servers that support
 429           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 430           x3655, and x3755; the x3800, x3850, and x3950 models that have
 431           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 432
 433           This driver can also be built as a module.  If so, the module
 434           will be called ibmpex.
 435
 436 config SENSORS_IT87
 437         tristate "ITE IT87xx and compatibles"
 438         select HWMON_VID
 439         help
 440           If you say yes here you get support for ITE IT8705F, IT8712F,
 441           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
 442           chips, and the SiS960 clone.
 443
 444           This driver can also be built as a module.  If so, the module
 445           will be called it87.
 446
 447 config SENSORS_JZ4740
 448         tristate "Ingenic JZ4740 SoC ADC driver"
 449         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 450         help
 451           If you say yes here you get support for reading adc values from the ADCIN
 452           pin on Ingenic JZ4740 SoC based boards.
 453
 454           This driver can also be build as a module. If so, the module will be
 455           called jz4740-hwmon.
 456
 457 config SENSORS_JC42
 458         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 459         depends on I2C
 460         help
 461           If you say yes here, you get support for JEDEC JC42.4 compliant
 462           temperature sensors, which are used on many DDR3 memory modules for
 463           mobile devices and servers.  Support will include, but not be limited
 464           to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
 465           MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 466
 467           This driver can also be built as a module.  If so, the module
 468           will be called jc42.
 469
 470 config SENSORS_LINEAGE
 471         tristate "Lineage Compact Power Line Power Entry Module"
 472         depends on I2C && EXPERIMENTAL
 473         help
 474           If you say yes here you get support for the Lineage Compact Power Line
 475           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 476           CP2000DC, CP2725, and others.
 477
 478           This driver can also be built as a module.  If so, the module
 479           will be called lineage-pem.
 480
 481 config SENSORS_LM63
 482         tristate "National Semiconductor LM63 and LM64"
 483         depends on I2C
 484         help
 485           If you say yes here you get support for the National
 486           Semiconductor LM63 and LM64 remote diode digital temperature
 487           sensors with integrated fan control.  Such chips are found
 488           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 489           others.
 490
 491           This driver can also be built as a module.  If so, the module
 492           will be called lm63.
 493
 494 config SENSORS_LM70
 495         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 496         depends on SPI_MASTER
 497         help
 498           If you say yes here you get support for the National Semiconductor
 499           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 500           sensor chips.
 501
 502           This driver can also be built as a module.  If so, the module
 503           will be called lm70.
 504
 505 config SENSORS_LM73
 506         tristate "National Semiconductor LM73"
 507         depends on I2C
 508         help
 509           If you say yes here you get support for National Semiconductor LM73
 510           sensor chips.
 511           This driver can also be built as a module.  If so, the module
 512           will be called lm73.
 513
 514 config SENSORS_LM75
 515         tristate "National Semiconductor LM75 and compatibles"
 516         depends on I2C
 517         help
 518           If you say yes here you get support for one common type of
 519           temperature sensor chip, with models including:
 520
 521                 - Dallas Semiconductor DS75 and DS1775
 522                 - Maxim MAX6625 and MAX6626
 523                 - Microchip MCP980x
 524                 - National Semiconductor LM75
 525                 - NXP's LM75A
 526                 - ST Microelectronics STDS75
 527                 - TelCom (now Microchip) TCN75
 528                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 529                   TMP275
 530
 531           This driver supports driver model based binding through board
 532           specific I2C device tables.
 533
 534           It also supports the "legacy" style of driver binding.  To use
 535           that with some chips which don't replicate LM75 quirks exactly,
 536           you may need the "force" module parameter.
 537
 538           This driver can also be built as a module.  If so, the module
 539           will be called lm75.
 540
 541 config SENSORS_LM77
 542         tristate "National Semiconductor LM77"
 543         depends on I2C
 544         help
 545           If you say yes here you get support for National Semiconductor LM77
 546           sensor chips.
 547
 548           This driver can also be built as a module.  If so, the module
 549           will be called lm77.
 550
 551 config SENSORS_LM78
 552         tristate "National Semiconductor LM78 and compatibles"
 553         depends on I2C
 554         select HWMON_VID
 555         help
 556           If you say yes here you get support for National Semiconductor LM78,
 557           LM78-J and LM79.
 558
 559           This driver can also be built as a module.  If so, the module
 560           will be called lm78.
 561
 562 config SENSORS_LM80
 563         tristate "National Semiconductor LM80"
 564         depends on I2C
 565         help
 566           If you say yes here you get support for National Semiconductor
 567           LM80 sensor chips.
 568
 569           This driver can also be built as a module.  If so, the module
 570           will be called lm80.
 571
 572 config SENSORS_LM83
 573         tristate "National Semiconductor LM83 and compatibles"
 574         depends on I2C
 575         help
 576           If you say yes here you get support for National Semiconductor
 577           LM82 and LM83 sensor chips.
 578
 579           This driver can also be built as a module.  If so, the module
 580           will be called lm83.
 581
 582 config SENSORS_LM85
 583         tristate "National Semiconductor LM85 and compatibles"
 584         depends on I2C
 585         select HWMON_VID
 586         help
 587           If you say yes here you get support for National Semiconductor LM85
 588           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 589           EMC6D101, EMC6D102, and EMC6D103.
 590
 591           This driver can also be built as a module.  If so, the module
 592           will be called lm85.
 593
 594 config SENSORS_LM87
 595         tristate "National Semiconductor LM87 and compatibles"
 596         depends on I2C
 597         select HWMON_VID
 598         help
 599           If you say yes here you get support for National Semiconductor LM87
 600           and Analog Devices ADM1024 sensor chips.
 601
 602           This driver can also be built as a module.  If so, the module
 603           will be called lm87.
 604
 605 config SENSORS_LM90
 606         tristate "National Semiconductor LM90 and compatibles"
 607         depends on I2C
 608         help
 609           If you say yes here you get support for National Semiconductor LM90,
 610           LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 611           MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 612           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
 613           W83L771W/G/AWG/ASG sensor chips.
 614
 615           This driver can also be built as a module.  If so, the module
 616           will be called lm90.
 617
 618 config SENSORS_LM92
 619         tristate "National Semiconductor LM92 and compatibles"
 620         depends on I2C
 621         help
 622           If you say yes here you get support for National Semiconductor LM92
 623           and Maxim MAX6635 sensor chips.
 624
 625           This driver can also be built as a module.  If so, the module
 626           will be called lm92.
 627
 628 config SENSORS_LM93
 629         tristate "National Semiconductor LM93 and compatibles"
 630         depends on I2C
 631         select HWMON_VID
 632         help
 633           If you say yes here you get support for National Semiconductor LM93,
 634           LM94, and compatible sensor chips.
 635
 636           This driver can also be built as a module.  If so, the module
 637           will be called lm93.
 638
 639 config SENSORS_LTC4215
 640         tristate "Linear Technology LTC4215"
 641         depends on I2C && EXPERIMENTAL
 642         default n
 643         help
 644           If you say yes here you get support for Linear Technology LTC4215
 645           Hot Swap Controller I2C interface.
 646
 647           This driver can also be built as a module. If so, the module will
 648           be called ltc4215.
 649
 650 config SENSORS_LTC4245
 651         tristate "Linear Technology LTC4245"
 652         depends on I2C && EXPERIMENTAL
 653         default n
 654         help
 655           If you say yes here you get support for Linear Technology LTC4245
 656           Multiple Supply Hot Swap Controller I2C interface.
 657
 658           This driver can also be built as a module. If so, the module will
 659           be called ltc4245.
 660
 661 config SENSORS_LTC4261
 662         tristate "Linear Technology LTC4261"
 663         depends on I2C && EXPERIMENTAL
 664         default n
 665         help
 666           If you say yes here you get support for Linear Technology LTC4261
 667           Negative Voltage Hot Swap Controller I2C interface.
 668
 669           This driver can also be built as a module. If so, the module will
 670           be called ltc4261.
 671
 672 config SENSORS_LM95241
 673         tristate "National Semiconductor LM95241 sensor chip"
 674         depends on I2C
 675         help
 676           If you say yes here you get support for LM95241 sensor chip.
 677
 678           This driver can also be built as a module.  If so, the module
 679           will be called lm95241.
 680
 681 config SENSORS_MAX1111
 682         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 683         depends on SPI_MASTER
 684         help
 685           Say y here to support Maxim's MAX1111 ADC chips.
 686
 687           This driver can also be built as a module.  If so, the module
 688           will be called max1111.
 689
 690 config SENSORS_MAX1619
 691         tristate "Maxim MAX1619 sensor chip"
 692         depends on I2C
 693         help
 694           If you say yes here you get support for MAX1619 sensor chip.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called max1619.
 698
 699 config SENSORS_MAX6639
 700         tristate "Maxim MAX6639 sensor chip"
 701         depends on I2C && EXPERIMENTAL
 702         help
 703           If you say yes here you get support for the MAX6639
 704           sensor chips.
 705
 706           This driver can also be built as a module.  If so, the module
 707           will be called max6639.
 708
 709 config SENSORS_MAX6650
 710         tristate "Maxim MAX6650 sensor chip"
 711         depends on I2C && EXPERIMENTAL
 712         help
 713           If you say yes here you get support for the MAX6650 / MAX6651
 714           sensor chips.
 715
 716           This driver can also be built as a module.  If so, the module
 717           will be called max6650.
 718
 719 config SENSORS_PC87360
 720         tristate "National Semiconductor PC87360 family"
 721         select HWMON_VID
 722         help
 723           If you say yes here you get access to the hardware monitoring
 724           functions of the National Semiconductor PC8736x Super-I/O chips.
 725           The PC87360, PC87363 and PC87364 only have fan monitoring and
 726           control.  The PC87365 and PC87366 additionally have voltage and
 727           temperature monitoring.
 728
 729           This driver can also be built as a module.  If so, the module
 730           will be called pc87360.
 731
 732 config SENSORS_PC87427
 733         tristate "National Semiconductor PC87427"
 734         help
 735           If you say yes here you get access to the hardware monitoring
 736           functions of the National Semiconductor PC87427 Super-I/O chip.
 737           The chip has two distinct logical devices, one for fan speed
 738           monitoring and control, and one for voltage and temperature
 739           monitoring. Fan speed monitoring and control are supported, as
 740           well as temperature monitoring. Voltages aren't supported yet.
 741
 742           This driver can also be built as a module.  If so, the module
 743           will be called pc87427.
 744
 745 config SENSORS_PCF8591
 746         tristate "Philips PCF8591 ADC/DAC"
 747         depends on I2C
 748         default n
 749         help
 750           If you say yes here you get support for Philips PCF8591 4-channel
 751           ADC, 1-channel DAC chips.
 752
 753           This driver can also be built as a module.  If so, the module
 754           will be called pcf8591.
 755
 756           These devices are hard to detect and rarely found on mainstream
 757           hardware.  If unsure, say N.
 758
 759 config PMBUS
 760         tristate "PMBus support"
 761         depends on I2C && EXPERIMENTAL
 762         default n
 763         help
 764           Say yes here if you want to enable PMBus support.
 765
 766           This driver can also be built as a module. If so, the module will
 767           be called pmbus_core.
 768
 769 if PMBUS
 770
 771 config SENSORS_PMBUS
 772         tristate "Generic PMBus devices"
 773         default n
 774         help
 775           If you say yes here you get hardware monitoring support for generic
 776           PMBus devices, including but not limited to BMR450, BMR451, BMR453,
 777           BMR454, and LTC2978.
 778
 779           This driver can also be built as a module. If so, the module will
 780           be called pmbus.
 781
 782 endif # PMBUS
 783
 784 config SENSORS_SHT15
 785         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 786         depends on GENERIC_GPIO
 787         help
 788           If you say yes here you get support for the Sensiron SHT10, SHT11,
 789           SHT15, SHT71, SHT75 humidity and temperature sensors.
 790
 791           This driver can also be built as a module.  If so, the module
 792           will be called sht15.
 793
 794 config SENSORS_SHT21
 795         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 796         depends on I2C
 797         help
 798           If you say yes here you get support for the Sensiron SHT21, SHT25
 799           humidity and temperature sensors.
 800
 801           This driver can also be built as a module.  If so, the module
 802           will be called sht21.
 803
 804 config SENSORS_S3C
 805         tristate "Samsung built-in ADC"
 806         depends on S3C_ADC
 807         help
 808           If you say yes here you get support for the on-board ADCs of
 809           the Samsung S3C24XX, S3C64XX and other series of SoC
 810
 811           This driver can also be built as a module. If so, the module
 812           will be called s3c-hwmon.
 813
 814 config SENSORS_S3C_RAW
 815         bool "Include raw channel attributes in sysfs"
 816         depends on SENSORS_S3C
 817         help
 818           Say Y here if you want to include raw copies of all the ADC
 819           channels in sysfs.
 820
 821 config SENSORS_SIS5595
 822         tristate "Silicon Integrated Systems Corp. SiS5595"
 823         depends on PCI
 824         help
 825           If you say yes here you get support for the integrated sensors in
 826           SiS5595 South Bridges.
 827
 828           This driver can also be built as a module.  If so, the module
 829           will be called sis5595.
 830
 831 config SENSORS_SMM665
 832         tristate "Summit Microelectronics SMM665"
 833         depends on I2C && EXPERIMENTAL
 834         default n
 835         help
 836           If you say yes here you get support for the hardware monitoring
 837           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 838           Active DC Output Controller / Monitor.
 839
 840           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 841           Support for those chips is untested.
 842
 843           This driver can also be built as a module. If so, the module will
 844           be called smm665.
 845
 846 config SENSORS_DME1737
 847         tristate "SMSC DME1737, SCH311x and compatibles"
 848         depends on I2C && EXPERIMENTAL
 849         select HWMON_VID
 850         help
 851           If you say yes here you get support for the hardware monitoring
 852           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 853           Asus A8000 Super-I/O chips.
 854
 855           This driver can also be built as a module.  If so, the module
 856           will be called dme1737.
 857
 858 config SENSORS_EMC1403
 859         tristate "SMSC EMC1403/23 thermal sensor"
 860         depends on I2C
 861         help
 862           If you say yes here you get support for the SMSC EMC1403/23
 863           temperature monitoring chip.
 864
 865           Threshold values can be configured using sysfs.
 866           Data from the different diodes are accessible via sysfs.
 867
 868 config SENSORS_EMC2103
 869         tristate "SMSC EMC2103"
 870         depends on I2C
 871         help
 872           If you say yes here you get support for the temperature
 873           and fan sensors of the SMSC EMC2103 chips.
 874
 875           This driver can also be built as a module.  If so, the module
 876           will be called emc2103.
 877
 878 config SENSORS_SMSC47M1
 879         tristate "SMSC LPC47M10x and compatibles"
 880         help
 881           If you say yes here you get support for the integrated fan
 882           monitoring and control capabilities of the SMSC LPC47B27x,
 883           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 884           LPC47M192, LPC47M292 and LPC47M997 chips.
 885
 886           The temperature and voltage sensor features of the LPC47M15x,
 887           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 888           driver, select also "SMSC LPC47M192 and compatibles" below for
 889           those.
 890
 891           This driver can also be built as a module.  If so, the module
 892           will be called smsc47m1.
 893
 894 config SENSORS_SMSC47M192
 895         tristate "SMSC LPC47M192 and compatibles"
 896         depends on I2C
 897         select HWMON_VID
 898         help
 899           If you say yes here you get support for the temperature and
 900           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 901           and LPC47M997 chips.
 902
 903           The fan monitoring and control capabilities of these chips
 904           are supported by another driver, select
 905           "SMSC LPC47M10x and compatibles" above. You need both drivers
 906           if you want fan control and voltage/temperature sensor support.
 907
 908           This driver can also be built as a module.  If so, the module
 909           will be called smsc47m192.
 910
 911 config SENSORS_SMSC47B397
 912         tristate "SMSC LPC47B397-NC"
 913         depends on EXPERIMENTAL
 914         help
 915           If you say yes here you get support for the SMSC LPC47B397-NC
 916           sensor chip.
 917
 918           This driver can also be built as a module.  If so, the module
 919           will be called smsc47b397.
 920
 921 config SENSORS_ADS7828
 922         tristate "Texas Instruments ADS7828"
 923         depends on I2C
 924         help
 925           If you say yes here you get support for Texas Instruments ADS7828
 926           12-bit 8-channel ADC device.
 927
 928           This driver can also be built as a module.  If so, the module
 929           will be called ads7828.
 930
 931 config SENSORS_ADS7871
 932         tristate "Texas Instruments ADS7871 A/D converter"
 933         depends on SPI
 934         help
 935           If you say yes here you get support for TI ADS7871 & ADS7870
 936
 937           This driver can also be built as a module.  If so, the module
 938           will be called ads7871.
 939
 940 config SENSORS_AMC6821
 941         tristate "Texas Instruments AMC6821"
 942         depends on I2C  && EXPERIMENTAL
 943         help
 944           If you say yes here you get support for the Texas Instruments
 945           AMC6821 hardware monitoring chips.
 946
 947           This driver can also be build as a module.  If so, the module
 948           will be called amc6821.
 949
 950 config SENSORS_THMC50
 951         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 952         depends on I2C
 953         help
 954           If you say yes here you get support for Texas Instruments THMC50
 955           sensor chips and clones: the Analog Devices ADM1022.
 956
 957           This driver can also be built as a module.  If so, the module
 958           will be called thmc50.
 959
 960 config SENSORS_TMP102
 961         tristate "Texas Instruments TMP102"
 962         depends on I2C && EXPERIMENTAL
 963         help
 964           If you say yes here you get support for Texas Instruments TMP102
 965           sensor chips.
 966
 967           This driver can also be built as a module.  If so, the module
 968           will be called tmp102.
 969
 970 config SENSORS_TMP401
 971         tristate "Texas Instruments TMP401 and compatibles"
 972         depends on I2C && EXPERIMENTAL
 973         help
 974           If you say yes here you get support for Texas Instruments TMP401 and
 975           TMP411 temperature sensor chips.
 976
 977           This driver can also be built as a module.  If so, the module
 978           will be called tmp401.
 979
 980 config SENSORS_TMP421
 981         tristate "Texas Instruments TMP421 and compatible"
 982         depends on I2C && EXPERIMENTAL
 983         help
 984           If you say yes here you get support for Texas Instruments TMP421,
 985           TMP422 and TMP423 temperature sensor chips.
 986
 987           This driver can also be built as a module.  If so, the module
 988           will be called tmp421.
 989
 990 config SENSORS_VIA_CPUTEMP
 991         tristate "VIA CPU temperature sensor"
 992         depends on X86
 993         help
 994           If you say yes here you get support for the temperature
 995           sensor inside your CPU. Supported are all known variants of
 996           the VIA C7 and Nano.
 997
 998 config SENSORS_VIA686A
 999         tristate "VIA686A"
1000         depends on PCI
1001         help
1002           If you say yes here you get support for the integrated sensors in
1003           Via 686A/B South Bridges.
1004
1005           This driver can also be built as a module.  If so, the module
1006           will be called via686a.
1007
1008 config SENSORS_VT1211
1009         tristate "VIA VT1211"
1010         select HWMON_VID
1011         help
1012           If you say yes here then you get support for hardware monitoring
1013           features of the VIA VT1211 Super-I/O chip.
1014
1015           This driver can also be built as a module.  If so, the module
1016           will be called vt1211.
1017
1018 config SENSORS_VT8231
1019         tristate "VIA VT8231"
1020         depends on PCI
1021         select HWMON_VID
1022         help
1023           If you say yes here then you get support for the integrated sensors
1024           in the VIA VT8231 device.
1025
1026           This driver can also be built as a module.  If so, the module
1027           will be called vt8231.
1028
1029 config SENSORS_W83781D
1030         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1031         depends on I2C
1032         select HWMON_VID
1033         help
1034           If you say yes here you get support for the Winbond W8378x series
1035           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1036           Asus AS99127F.
1037
1038           This driver can also be built as a module.  If so, the module
1039           will be called w83781d.
1040
1041 config SENSORS_W83791D
1042         tristate "Winbond W83791D"
1043         depends on I2C
1044         select HWMON_VID
1045         help
1046           If you say yes here you get support for the Winbond W83791D chip.
1047
1048           This driver can also be built as a module.  If so, the module
1049           will be called w83791d.
1050
1051 config SENSORS_W83792D
1052         tristate "Winbond W83792D"
1053         depends on I2C
1054         help
1055           If you say yes here you get support for the Winbond W83792D chip.
1056
1057           This driver can also be built as a module.  If so, the module
1058           will be called w83792d.
1059
1060 config SENSORS_W83793
1061         tristate "Winbond W83793"
1062         depends on I2C && EXPERIMENTAL
1063         select HWMON_VID
1064         help
1065           If you say yes here you get support for the Winbond W83793
1066           hardware monitoring chip, including support for the integrated
1067           watchdog.
1068
1069           This driver can also be built as a module.  If so, the module
1070           will be called w83793.
1071
1072 config SENSORS_W83795
1073         tristate "Winbond/Nuvoton W83795G/ADG"
1074         depends on I2C && EXPERIMENTAL
1075         help
1076           If you say yes here you get support for the Winbond W83795G and
1077           W83795ADG hardware monitoring chip.
1078
1079           This driver can also be built as a module.  If so, the module
1080           will be called w83795.
1081
1082 config SENSORS_W83795_FANCTRL
1083         boolean "Include fan control support (DANGEROUS)"
1084         depends on SENSORS_W83795 && EXPERIMENTAL
1085         default n
1086         help
1087           If you say yes here, support for the both manual and automatic
1088           fan control features will be included in the driver.
1089
1090           This part of the code wasn't carefully reviewed and tested yet,
1091           so enabling this option is strongly discouraged on production
1092           servers. Only developers and testers should enable it for the
1093           time being.
1094
1095           Please also note that this option will create sysfs attribute
1096           files which may change in the future, so you shouldn't rely
1097           on them being stable.
1098
1099 config SENSORS_W83L785TS
1100         tristate "Winbond W83L785TS-S"
1101         depends on I2C && EXPERIMENTAL
1102         help
1103           If you say yes here you get support for the Winbond W83L785TS-S
1104           sensor chip, which is used on the Asus A7N8X, among other
1105           motherboards.
1106
1107           This driver can also be built as a module.  If so, the module
1108           will be called w83l785ts.
1109
1110 config SENSORS_W83L786NG
1111         tristate "Winbond W83L786NG, W83L786NR"
1112         depends on I2C && EXPERIMENTAL
1113         help
1114           If you say yes here you get support for the Winbond W83L786NG
1115           and W83L786NR sensor chips.
1116
1117           This driver can also be built as a module.  If so, the module
1118           will be called w83l786ng.
1119
1120 config SENSORS_W83627HF
1121         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1122         select HWMON_VID
1123         help
1124           If you say yes here you get support for the Winbond W836X7 series
1125           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1126           W83697HF.
1127
1128           This driver can also be built as a module.  If so, the module
1129           will be called w83627hf.
1130
1131 config SENSORS_W83627EHF
1132         tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
1133         select HWMON_VID
1134         help
1135           If you say yes here you get support for the hardware
1136           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1137
1138           This driver also supports the W83627EHG, which is the lead-free
1139           version of the W83627EHF, and the W83627DHG, which is a similar
1140           chip suited for specific Intel processors that use PECI such as
1141           the Core 2 Duo.
1142
1143           This driver also supports the W83667HG chip.
1144
1145           This driver can also be built as a module.  If so, the module
1146           will be called w83627ehf.
1147
1148 config SENSORS_WM831X
1149         tristate "WM831x PMICs"
1150         depends on MFD_WM831X
1151         help
1152           If you say yes here you get support for the hardware
1153           monitoring functionality of the Wolfson Microelectronics
1154           WM831x series of PMICs.
1155
1156           This driver can also be built as a module.  If so, the module
1157           will be called wm831x-hwmon.
1158
1159 config SENSORS_WM8350
1160         tristate "Wolfson Microelectronics WM835x"
1161         depends on MFD_WM8350
1162         help
1163           If you say yes here you get support for the hardware
1164           monitoring features of the WM835x series of PMICs.
1165
1166           This driver can also be built as a module.  If so, the module
1167           will be called wm8350-hwmon.
1168
1169 config SENSORS_ULTRA45
1170         tristate "Sun Ultra45 PIC16F747"
1171         depends on SPARC64
1172         help
1173           This driver provides support for the Ultra45 workstation environmental
1174           sensors.
1175
1176 config SENSORS_LIS3_SPI
1177         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1178         depends on !ACPI && SPI_MASTER && INPUT
1179         select INPUT_POLLDEV
1180         default n
1181         help
1182           This driver provides support for the LIS3LV02Dx accelerometer connected
1183           via SPI. The accelerometer data is readable via
1184           /sys/devices/platform/lis3lv02d.
1185
1186           This driver also provides an absolute input class device, allowing
1187           the laptop to act as a pinball machine-esque joystick.
1188
1189           This driver can also be built as modules.  If so, the core module
1190           will be called lis3lv02d and a specific module for the SPI transport
1191           is called lis3lv02d_spi.
1192
1193 config SENSORS_LIS3_I2C
1194         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1195         depends on I2C && INPUT
1196         select INPUT_POLLDEV
1197         default n
1198         help
1199           This driver provides support for the LIS3LV02Dx accelerometer connected
1200           via I2C. The accelerometer data is readable via
1201           /sys/devices/platform/lis3lv02d.
1202
1203           This driver also provides an absolute input class device, allowing
1204           the device to act as a pinball machine-esque joystick.
1205
1206           This driver can also be built as modules.  If so, the core module
1207           will be called lis3lv02d and a specific module for the I2C transport
1208           is called lis3lv02d_i2c.
1209
1210 config SENSORS_APPLESMC
1211         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1212         depends on INPUT && X86
1213         select NEW_LEDS
1214         select LEDS_CLASS
1215         select INPUT_POLLDEV
1216         default n
1217         help
1218           This driver provides support for the Apple System Management
1219           Controller, which provides an accelerometer (Apple Sudden Motion
1220           Sensor), light sensors, temperature sensors, keyboard backlight
1221           control and fan control.
1222
1223           Only Intel-based Apple's computers are supported (MacBook Pro,
1224           MacBook, MacMini).
1225
1226           Data from the different sensors, keyboard backlight control and fan
1227           control are accessible via sysfs.
1228
1229           This driver also provides an absolute input class device, allowing
1230           the laptop to act as a pinball machine-esque joystick.
1231
1232           Say Y here if you have an applicable laptop and want to experience
1233           the awesome power of applesmc.
1234
1235 config SENSORS_MC13783_ADC
1236         tristate "Freescale MC13783 ADC"
1237         depends on MFD_MC13783
1238         help
1239           Support for the A/D converter on MC13783 PMIC.
1240
1241 if ACPI
1242
1243 comment "ACPI drivers"
1244
1245 config SENSORS_ATK0110
1246         tristate "ASUS ATK0110"
1247         depends on X86 && EXPERIMENTAL
1248         help
1249           If you say yes here you get support for the ACPI hardware
1250           monitoring interface found in many ASUS motherboards. This
1251           driver will provide readings of fans, voltages and temperatures
1252           through the system firmware.
1253
1254           This driver can also be built as a module. If so, the module
1255           will be called asus_atk0110.
1256
1257 config SENSORS_LIS3LV02D
1258         tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1259         depends on INPUT
1260         select INPUT_POLLDEV
1261         select NEW_LEDS
1262         select LEDS_CLASS
1263         default n
1264         help
1265           This driver provides support for the LIS3* accelerometers, such as the
1266           LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1267           of HP laptops, which have the "Mobile Data Protection System 3D" or
1268           "3D DriveGuard" feature. On such systems the driver should load
1269           automatically (via ACPI alias). The accelerometer might also be found
1270           in other systems, connected via SPI or I2C. The accelerometer data is
1271           readable via /sys/devices/platform/lis3lv02d.
1272
1273           This driver also provides an absolute input class device, allowing
1274           a laptop to act as a pinball machine-esque joystick. It provides also
1275           a misc device which can be used to detect free-fall. On HP laptops,
1276           if the led infrastructure is activated, support for a led indicating
1277           disk protection will be provided as hp::hddprotect. For more
1278           information on the feature, refer to Documentation/hwmon/lis3lv02d.
1279
1280           This driver can also be built as modules.  If so, the core module
1281           will be called lis3lv02d and a specific module for HP laptops will be
1282           called hp_accel.
1283
1284           Say Y here if you have an applicable laptop and want to experience
1285           the awesome power of lis3lv02d.
1286
1287 endif # ACPI
1288
1289 endif # HWMON