drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_AB8500
  43         tristate "AB8500 thermal monitoring"
  44         depends on AB8500_GPADC && AB8500_BM
  45         default n
  46         help
  47           If you say yes here you get support for the thermal sensor part
  48           of the AB8500 chip. The driver includes thermal management for
  49           AB8500 die and two GPADC channels. The GPADC channel are preferably
  50           used to access sensors outside the AB8500 chip.
  51
  52           This driver can also be built as a module.  If so, the module
  53           will be called abx500-temp.
  54
  55 config SENSORS_ABITUGURU
  56         tristate "Abit uGuru (rev 1 & 2)"
  57         depends on X86 && DMI
  58         help
  59           If you say yes here you get support for the sensor part of the first
  60           and second revision of the Abit uGuru chip. The voltage and frequency
  61           control parts of the Abit uGuru are not supported. The Abit uGuru
  62           chip can be found on Abit uGuru featuring motherboards (most modern
  63           Abit motherboards from before end 2005). For more info and a list
  64           of which motherboards have which revision see
  65           Documentation/hwmon/abituguru
  66
  67           This driver can also be built as a module.  If so, the module
  68           will be called abituguru.
  69
  70 config SENSORS_ABITUGURU3
  71         tristate "Abit uGuru (rev 3)"
  72         depends on X86 && DMI
  73         help
  74           If you say yes here you get support for the sensor part of the
  75           third revision of the Abit uGuru chip. Only reading the sensors
  76           and their settings is supported. The third revision of the Abit
  77           uGuru chip can be found on recent Abit motherboards (since end
  78           2005). For more info and a list of which motherboards have which
  79           revision see Documentation/hwmon/abituguru3
  80
  81           This driver can also be built as a module.  If so, the module
  82           will be called abituguru3.
  83
  84 config SENSORS_AD7314
  85         tristate "Analog Devices AD7314 and compatibles"
  86         depends on SPI
  87         help
  88           If you say yes here you get support for the Analog Devices
  89           AD7314, ADT7301 and ADT7302 temperature sensors.
  90
  91           This driver can also be built as a module. If so, the module
  92           will be called ad7314.
  93
  94 config SENSORS_AD7414
  95         tristate "Analog Devices AD7414"
  96         depends on I2C
  97         help
  98           If you say yes here you get support for the Analog Devices
  99           AD7414 temperature monitoring chip.
 100
 101           This driver can also be built as a module. If so, the module
 102           will be called ad7414.
 103
 104 config SENSORS_AD7418
 105         tristate "Analog Devices AD7416, AD7417 and AD7418"
 106         depends on I2C
 107         help
 108           If you say yes here you get support for the Analog Devices
 109           AD7416, AD7417 and AD7418 temperature monitoring chips.
 110
 111           This driver can also be built as a module. If so, the module
 112           will be called ad7418.
 113
 114 config SENSORS_ADCXX
 115         tristate "National Semiconductor ADCxxxSxxx"
 116         depends on SPI_MASTER
 117         help
 118           If you say yes here you get support for the National Semiconductor
 119           ADC<bb><c>S<sss> chip family, where
 120           * bb  is the resolution in number of bits (8, 10, 12)
 121           * c   is the number of channels (1, 2, 4, 8)
 122           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 123             kSPS and 101 for 1 MSPS)
 124
 125           Examples : ADC081S101, ADC124S501, ...
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adcxx.
 129
 130 config SENSORS_ADM1021
 131         tristate "Analog Devices ADM1021 and compatibles"
 132         depends on I2C
 133         help
 134           If you say yes here you get support for Analog Devices ADM1021
 135           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 136           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1021.
 140
 141 config SENSORS_ADM1025
 142         tristate "Analog Devices ADM1025 and compatibles"
 143         depends on I2C
 144         select HWMON_VID
 145         help
 146           If you say yes here you get support for Analog Devices ADM1025
 147           and Philips NE1619 sensor chips.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1025.
 151
 152 config SENSORS_ADM1026
 153         tristate "Analog Devices ADM1026 and compatibles"
 154         depends on I2C
 155         select HWMON_VID
 156         help
 157           If you say yes here you get support for Analog Devices ADM1026
 158           sensor chip.
 159
 160           This driver can also be built as a module.  If so, the module
 161           will be called adm1026.
 162
 163 config SENSORS_ADM1029
 164         tristate "Analog Devices ADM1029"
 165         depends on I2C
 166         help
 167           If you say yes here you get support for Analog Devices ADM1029
 168           sensor chip.
 169           Very rare chip, please let us know you use it.
 170
 171           This driver can also be built as a module.  If so, the module
 172           will be called adm1029.
 173
 174 config SENSORS_ADM1031
 175         tristate "Analog Devices ADM1031 and compatibles"
 176         depends on I2C
 177         help
 178           If you say yes here you get support for Analog Devices ADM1031
 179           and ADM1030 sensor chips.
 180
 181           This driver can also be built as a module.  If so, the module
 182           will be called adm1031.
 183
 184 config SENSORS_ADM9240
 185         tristate "Analog Devices ADM9240 and compatibles"
 186         depends on I2C
 187         select HWMON_VID
 188         help
 189           If you say yes here you get support for Analog Devices ADM9240,
 190           Dallas DS1780, National Semiconductor LM81 sensor chips.
 191
 192           This driver can also be built as a module.  If so, the module
 193           will be called adm9240.
 194
 195 config SENSORS_ADT7X10
 196         tristate
 197         help
 198           This module contains common code shared by the ADT7310/ADT7320 and
 199           ADT7410/ADT7420 temperature monitoring chip drivers.
 200
 201           If build as a module, the module will be called adt7x10.
 202
 203 config SENSORS_ADT7310
 204         tristate "Analog Devices ADT7310/ADT7320"
 205         depends on SPI_MASTER
 206         select SENSORS_ADT7X10
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7310 and ADT7320 temperature monitoring chips.
 210
 211           This driver can also be built as a module. If so, the module
 212           will be called adt7310.
 213
 214 config SENSORS_ADT7410
 215         tristate "Analog Devices ADT7410/ADT7420"
 216         depends on I2C
 217         select SENSORS_ADT7X10
 218         help
 219           If you say yes here you get support for the Analog Devices
 220           ADT7410 and ADT7420 temperature monitoring chips.
 221
 222           This driver can also be built as a module. If so, the module
 223           will be called adt7410.
 224
 225 config SENSORS_ADT7411
 226         tristate "Analog Devices ADT7411"
 227         depends on I2C
 228         help
 229           If you say yes here you get support for the Analog Devices
 230           ADT7411 voltage and temperature monitoring chip.
 231
 232           This driver can also be built as a module. If so, the module
 233           will be called adt7411.
 234
 235 config SENSORS_ADT7462
 236         tristate "Analog Devices ADT7462"
 237         depends on I2C
 238         help
 239           If you say yes here you get support for the Analog Devices
 240           ADT7462 temperature monitoring chips.
 241
 242           This driver can also be built as a module. If so, the module
 243           will be called adt7462.
 244
 245 config SENSORS_ADT7470
 246         tristate "Analog Devices ADT7470"
 247         depends on I2C
 248         help
 249           If you say yes here you get support for the Analog Devices
 250           ADT7470 temperature monitoring chips.
 251
 252           This driver can also be built as a module. If so, the module
 253           will be called adt7470.
 254
 255 config SENSORS_ADT7475
 256         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 257         depends on I2C
 258         select HWMON_VID
 259         help
 260           If you say yes here you get support for the Analog Devices
 261           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 262           chips.
 263
 264           This driver can also be build as a module.  If so, the module
 265           will be called adt7475.
 266
 267 config SENSORS_ASC7621
 268         tristate "Andigilog aSC7621"
 269         depends on I2C
 270         help
 271           If you say yes here you get support for the aSC7621
 272           family of SMBus sensors chip found on most Intel X38, X48, X58,
 273           945, 965 and 975 desktop boards.  Currently supported chips:
 274           aSC7621
 275           aSC7621a
 276
 277           This driver can also be built as a module.  If so, the module
 278           will be called asc7621.
 279
 280 config SENSORS_K8TEMP
 281         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 282         depends on X86 && PCI
 283         help
 284           If you say yes here you get support for the temperature
 285           sensor(s) inside your CPU. Supported is whole AMD K8
 286           microarchitecture. Please note that you will need at least
 287           lm-sensors 2.10.1 for proper userspace support.
 288
 289           This driver can also be built as a module.  If so, the module
 290           will be called k8temp.
 291
 292 config SENSORS_K10TEMP
 293         tristate "AMD Family 10h+ temperature sensor"
 294         depends on X86 && PCI
 295         help
 296           If you say yes here you get support for the temperature
 297           sensor(s) inside your CPU. Supported are later revisions of
 298           the AMD Family 10h and all revisions of the AMD Family 11h,
 299           12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
 300           16h (Kabini) microarchitectures.
 301
 302           This driver can also be built as a module.  If so, the module
 303           will be called k10temp.
 304
 305 config SENSORS_FAM15H_POWER
 306         tristate "AMD Family 15h processor power"
 307         depends on X86 && PCI
 308         help
 309           If you say yes here you get support for processor power
 310           information of your AMD family 15h CPU.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called fam15h_power.
 314
 315 config SENSORS_ASB100
 316         tristate "Asus ASB100 Bach"
 317         depends on X86 && I2C
 318         select HWMON_VID
 319         help
 320           If you say yes here you get support for the ASB100 Bach sensor
 321           chip found on some Asus mainboards.
 322
 323           This driver can also be built as a module.  If so, the module
 324           will be called asb100.
 325
 326 config SENSORS_ATXP1
 327         tristate "Attansic ATXP1 VID controller"
 328         depends on I2C
 329         select HWMON_VID
 330         help
 331           If you say yes here you get support for the Attansic ATXP1 VID
 332           controller.
 333
 334           If your board have such a chip, you are able to control your CPU
 335           core and other voltages.
 336
 337           This driver can also be built as a module.  If so, the module
 338           will be called atxp1.
 339
 340 config SENSORS_DS620
 341         tristate "Dallas Semiconductor DS620"
 342         depends on I2C
 343         help
 344           If you say yes here you get support for Dallas Semiconductor
 345           DS620 sensor chip.
 346
 347           This driver can also be built as a module.  If so, the module
 348           will be called ds620.
 349
 350 config SENSORS_DS1621
 351         tristate "Dallas Semiconductor DS1621 and compatibles"
 352         depends on I2C
 353         help
 354           If you say yes here you get support for Dallas Semiconductor/Maxim
 355           Integrated DS1621 sensor chips and compatible models including:
 356
 357           - Dallas Semiconductor DS1625
 358           - Maxim Integrated DS1631
 359           - Maxim Integrated DS1721
 360           - Maxim Integrated DS1731
 361
 362           This driver can also be built as a module.  If so, the module
 363           will be called ds1621.
 364
 365 config SENSORS_DA9052_ADC
 366         tristate "Dialog DA9052/DA9053 ADC"
 367         depends on PMIC_DA9052
 368         help
 369           Say y here to support the ADC found on Dialog Semiconductor
 370           DA9052-BC and DA9053-AA/Bx PMICs.
 371
 372           This driver can also be built as module. If so, the module
 373           will be called da9052-hwmon.
 374
 375 config SENSORS_DA9055
 376         tristate "Dialog Semiconductor DA9055 ADC"
 377         depends on MFD_DA9055
 378         help
 379           If you say yes here you get support for ADC on the Dialog
 380           Semiconductor DA9055 PMIC.
 381
 382           This driver can also be built as a module.  If so, the module
 383           will be called da9055-hwmon.
 384
 385 config SENSORS_I5K_AMB
 386         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 387         depends on PCI
 388         help
 389           If you say yes here you get support for FB-DIMM AMB temperature
 390           monitoring chips on systems with the Intel 5000 series chipset.
 391
 392           This driver can also be built as a module. If so, the module
 393           will be called i5k_amb.
 394
 395 config SENSORS_F71805F
 396         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 397         depends on !PPC
 398         help
 399           If you say yes here you get support for hardware monitoring
 400           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 401           Super-I/O chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called f71805f.
 405
 406 config SENSORS_F71882FG
 407         tristate "Fintek F71882FG and compatibles"
 408         depends on !PPC
 409         help
 410           If you say yes here you get support for hardware monitoring
 411           features of many Fintek Super-I/O (LPC) chips. The currently
 412           supported chips are:
 413             F71808E/A
 414             F71858FG
 415             F71862FG
 416             F71863FG
 417             F71869F/E/A
 418             F71882FG
 419             F71883FG
 420             F71889FG/ED/A
 421             F8000
 422             F81801U
 423             F81865F
 424
 425           This driver can also be built as a module.  If so, the module
 426           will be called f71882fg.
 427
 428 config SENSORS_F75375S
 429         tristate "Fintek F75375S/SP, F75373 and F75387"
 430         depends on I2C
 431         help
 432           If you say yes here you get support for hardware monitoring
 433           features of the Fintek F75375S/SP, F75373 and F75387
 434
 435           This driver can also be built as a module.  If so, the module
 436           will be called f75375s.
 437
 438 config SENSORS_FSCHMD
 439         tristate "Fujitsu Siemens Computers sensor chips"
 440         depends on X86 && I2C
 441         help
 442           If you say yes here you get support for the following Fujitsu
 443           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 444           Heimdall, Heracles, Hades and Syleus including support for the
 445           integrated watchdog.
 446
 447           This is a merged driver for FSC sensor chips replacing the fscpos,
 448           fscscy and fscher drivers and adding support for several other FSC
 449           sensor chips.
 450
 451           This driver can also be built as a module.  If so, the module
 452           will be called fschmd.
 453
 454 config SENSORS_G760A
 455         tristate "GMT G760A"
 456         depends on I2C
 457         help
 458           If you say yes here you get support for Global Mixed-mode
 459           Technology Inc G760A fan speed PWM controller chips.
 460
 461           This driver can also be built as a module.  If so, the module
 462           will be called g760a.
 463
 464 config SENSORS_G762
 465         tristate "GMT G762 and G763"
 466         depends on I2C
 467         help
 468           If you say yes here you get support for Global Mixed-mode
 469           Technology Inc G762 and G763 fan speed PWM controller chips.
 470
 471           This driver can also be built as a module.  If so, the module
 472           will be called g762.
 473
 474 config SENSORS_GL518SM
 475         tristate "Genesys Logic GL518SM"
 476         depends on I2C
 477         help
 478           If you say yes here you get support for Genesys Logic GL518SM
 479           sensor chips.
 480
 481           This driver can also be built as a module.  If so, the module
 482           will be called gl518sm.
 483
 484 config SENSORS_GL520SM
 485         tristate "Genesys Logic GL520SM"
 486         depends on I2C
 487         select HWMON_VID
 488         help
 489           If you say yes here you get support for Genesys Logic GL520SM
 490           sensor chips.
 491
 492           This driver can also be built as a module.  If so, the module
 493           will be called gl520sm.
 494
 495 config SENSORS_GPIO_FAN
 496         tristate "GPIO fan"
 497         depends on GPIOLIB
 498         help
 499           If you say yes here you get support for fans connected to GPIO lines.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called gpio-fan.
 503
 504 config SENSORS_HIH6130
 505         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 506         depends on I2C
 507         help
 508           If you say yes here you get support for Honeywell Humidicon
 509           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 510
 511           This driver can also be built as a module.  If so, the module
 512           will be called hih6130.
 513
 514 config SENSORS_HTU21
 515         tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 516         depends on I2C
 517         help
 518           If you say yes here you get support for the Measurement Specialties
 519           HTU21D humidity and temperature sensors.
 520
 521           This driver can also be built as a module.  If so, the module
 522           will be called htu21.
 523
 524 config SENSORS_CORETEMP
 525         tristate "Intel Core/Core2/Atom temperature sensor"
 526         depends on X86
 527         help
 528           If you say yes here you get support for the temperature
 529           sensor inside your CPU. Most of the family 6 CPUs
 530           are supported. Check Documentation/hwmon/coretemp for details.
 531
 532 config SENSORS_IBMAEM
 533         tristate "IBM Active Energy Manager temperature/power sensors and control"
 534         select IPMI_SI
 535         depends on IPMI_HANDLER
 536         help
 537           If you say yes here you get support for the temperature and
 538           power sensors and capping hardware in various IBM System X
 539           servers that support Active Energy Manager.  This includes
 540           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 541           and certain HC10/HS2x/LS2x/QS2x blades.
 542
 543           This driver can also be built as a module.  If so, the module
 544           will be called ibmaem.
 545
 546 config SENSORS_IBMPEX
 547         tristate "IBM PowerExecutive temperature/power sensors"
 548         select IPMI_SI
 549         depends on IPMI_HANDLER
 550         help
 551           If you say yes here you get support for the temperature and
 552           power sensors in various IBM System X servers that support
 553           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 554           x3655, and x3755; the x3800, x3850, and x3950 models that have
 555           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 556
 557           This driver can also be built as a module.  If so, the module
 558           will be called ibmpex.
 559
 560 config SENSORS_IIO_HWMON
 561         tristate "Hwmon driver that uses channels specified via iio maps"
 562         depends on IIO
 563         help
 564           This is a platform driver that in combination with a suitable
 565           map allows IIO devices to provide basic hwmon functionality
 566           for those channels specified in the map.  This map can be provided
 567           either via platform data or the device tree bindings.
 568
 569 config SENSORS_IT87
 570         tristate "ITE IT87xx and compatibles"
 571         depends on !PPC
 572         select HWMON_VID
 573         help
 574           If you say yes here you get support for ITE IT8705F, IT8712F,
 575           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 576           IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 577           SiS950 clone.
 578
 579           This driver can also be built as a module.  If so, the module
 580           will be called it87.
 581
 582 config SENSORS_JZ4740
 583         tristate "Ingenic JZ4740 SoC ADC driver"
 584         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 585         help
 586           If you say yes here you get support for reading adc values from the ADCIN
 587           pin on Ingenic JZ4740 SoC based boards.
 588
 589           This driver can also be build as a module. If so, the module will be
 590           called jz4740-hwmon.
 591
 592 config SENSORS_JC42
 593         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 594         depends on I2C
 595         help
 596           If you say yes here, you get support for JEDEC JC42.4 compliant
 597           temperature sensors, which are used on many DDR3 memory modules for
 598           mobile devices and servers.  Support will include, but not be limited
 599           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 600           MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 601           STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 602
 603           This driver can also be built as a module.  If so, the module
 604           will be called jc42.
 605
 606 config SENSORS_LINEAGE
 607         tristate "Lineage Compact Power Line Power Entry Module"
 608         depends on I2C
 609         help
 610           If you say yes here you get support for the Lineage Compact Power Line
 611           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 612           CP2000DC, CP2725, and others.
 613
 614           This driver can also be built as a module.  If so, the module
 615           will be called lineage-pem.
 616
 617 config SENSORS_LM63
 618         tristate "National Semiconductor LM63 and compatibles"
 619         depends on I2C
 620         help
 621           If you say yes here you get support for the National
 622           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 623           sensors with integrated fan control.  Such chips are found
 624           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 625           others.
 626
 627           This driver can also be built as a module.  If so, the module
 628           will be called lm63.
 629
 630 config SENSORS_LM70
 631         tristate "National Semiconductor LM70 and compatibles"
 632         depends on SPI_MASTER
 633         help
 634           If you say yes here you get support for the National Semiconductor
 635           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 636           ture sensor chips.
 637
 638           This driver can also be built as a module.  If so, the module
 639           will be called lm70.
 640
 641 config SENSORS_LM73
 642         tristate "National Semiconductor LM73"
 643         depends on I2C
 644         help
 645           If you say yes here you get support for National Semiconductor LM73
 646           sensor chips.
 647           This driver can also be built as a module.  If so, the module
 648           will be called lm73.
 649
 650 config SENSORS_LM75
 651         tristate "National Semiconductor LM75 and compatibles"
 652         depends on I2C
 653         help
 654           If you say yes here you get support for one common type of
 655           temperature sensor chip, with models including:
 656
 657                 - Analog Devices ADT75
 658                 - Dallas Semiconductor DS75, DS1775 and DS7505
 659                 - Maxim MAX6625 and MAX6626
 660                 - Microchip MCP980x
 661                 - National Semiconductor LM75, LM75A
 662                 - NXP's LM75A
 663                 - ST Microelectronics STDS75
 664                 - TelCom (now Microchip) TCN75
 665                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 666                   TMP275
 667
 668           This driver supports driver model based binding through board
 669           specific I2C device tables.
 670
 671           It also supports the "legacy" style of driver binding.  To use
 672           that with some chips which don't replicate LM75 quirks exactly,
 673           you may need the "force" module parameter.
 674
 675           This driver can also be built as a module.  If so, the module
 676           will be called lm75.
 677
 678 config SENSORS_LM77
 679         tristate "National Semiconductor LM77"
 680         depends on I2C
 681         help
 682           If you say yes here you get support for National Semiconductor LM77
 683           sensor chips.
 684
 685           This driver can also be built as a module.  If so, the module
 686           will be called lm77.
 687
 688 config SENSORS_LM78
 689         tristate "National Semiconductor LM78 and compatibles"
 690         depends on I2C
 691         select HWMON_VID
 692         help
 693           If you say yes here you get support for National Semiconductor LM78,
 694           LM78-J and LM79.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called lm78.
 698
 699 config SENSORS_LM80
 700         tristate "National Semiconductor LM80 and LM96080"
 701         depends on I2C
 702         help
 703           If you say yes here you get support for National Semiconductor
 704           LM80 and LM96080 sensor chips.
 705
 706           This driver can also be built as a module.  If so, the module
 707           will be called lm80.
 708
 709 config SENSORS_LM83
 710         tristate "National Semiconductor LM83 and compatibles"
 711         depends on I2C
 712         help
 713           If you say yes here you get support for National Semiconductor
 714           LM82 and LM83 sensor chips.
 715
 716           This driver can also be built as a module.  If so, the module
 717           will be called lm83.
 718
 719 config SENSORS_LM85
 720         tristate "National Semiconductor LM85 and compatibles"
 721         depends on I2C
 722         select HWMON_VID
 723         help
 724           If you say yes here you get support for National Semiconductor LM85
 725           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 726           EMC6D101, EMC6D102, and EMC6D103.
 727
 728           This driver can also be built as a module.  If so, the module
 729           will be called lm85.
 730
 731 config SENSORS_LM87
 732         tristate "National Semiconductor LM87 and compatibles"
 733         depends on I2C
 734         select HWMON_VID
 735         help
 736           If you say yes here you get support for National Semiconductor LM87
 737           and Analog Devices ADM1024 sensor chips.
 738
 739           This driver can also be built as a module.  If so, the module
 740           will be called lm87.
 741
 742 config SENSORS_LM90
 743         tristate "National Semiconductor LM90 and compatibles"
 744         depends on I2C
 745         help
 746           If you say yes here you get support for National Semiconductor LM90,
 747           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 748           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 749           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 750           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 751           sensor chips.
 752
 753           This driver can also be built as a module.  If so, the module
 754           will be called lm90.
 755
 756 config SENSORS_LM92
 757         tristate "National Semiconductor LM92 and compatibles"
 758         depends on I2C
 759         help
 760           If you say yes here you get support for National Semiconductor LM92
 761           and Maxim MAX6635 sensor chips.
 762
 763           This driver can also be built as a module.  If so, the module
 764           will be called lm92.
 765
 766 config SENSORS_LM93
 767         tristate "National Semiconductor LM93 and compatibles"
 768         depends on I2C
 769         select HWMON_VID
 770         help
 771           If you say yes here you get support for National Semiconductor LM93,
 772           LM94, and compatible sensor chips.
 773
 774           This driver can also be built as a module.  If so, the module
 775           will be called lm93.
 776
 777 config SENSORS_LTC4151
 778         tristate "Linear Technology LTC4151"
 779         depends on I2C
 780         default n
 781         help
 782           If you say yes here you get support for Linear Technology LTC4151
 783           High Voltage I2C Current and Voltage Monitor interface.
 784
 785           This driver can also be built as a module. If so, the module will
 786           be called ltc4151.
 787
 788 config SENSORS_LTC4215
 789         tristate "Linear Technology LTC4215"
 790         depends on I2C
 791         default n
 792         help
 793           If you say yes here you get support for Linear Technology LTC4215
 794           Hot Swap Controller I2C interface.
 795
 796           This driver can also be built as a module. If so, the module will
 797           be called ltc4215.
 798
 799 config SENSORS_LTC4245
 800         tristate "Linear Technology LTC4245"
 801         depends on I2C
 802         default n
 803         help
 804           If you say yes here you get support for Linear Technology LTC4245
 805           Multiple Supply Hot Swap Controller I2C interface.
 806
 807           This driver can also be built as a module. If so, the module will
 808           be called ltc4245.
 809
 810 config SENSORS_LTC4261
 811         tristate "Linear Technology LTC4261"
 812         depends on I2C
 813         default n
 814         help
 815           If you say yes here you get support for Linear Technology LTC4261
 816           Negative Voltage Hot Swap Controller I2C interface.
 817
 818           This driver can also be built as a module. If so, the module will
 819           be called ltc4261.
 820
 821 config SENSORS_LM95234
 822         tristate "National Semiconductor LM95234"
 823         depends on I2C
 824         help
 825           If you say yes here you get support for the LM95234 temperature
 826           sensor.
 827
 828           This driver can also be built as a module.  If so, the module
 829           will be called lm95234.
 830
 831 config SENSORS_LM95241
 832         tristate "National Semiconductor LM95241 and compatibles"
 833         depends on I2C
 834         help
 835           If you say yes here you get support for LM95231 and LM95241 sensor
 836           chips.
 837
 838           This driver can also be built as a module.  If so, the module
 839           will be called lm95241.
 840
 841 config SENSORS_LM95245
 842         tristate "National Semiconductor LM95245 sensor chip"
 843         depends on I2C
 844         help
 845           If you say yes here you get support for LM95245 sensor chip.
 846
 847           This driver can also be built as a module.  If so, the module
 848           will be called lm95245.
 849
 850 config SENSORS_MAX1111
 851         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 852         depends on SPI_MASTER
 853         help
 854           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 855           ADC chips.
 856
 857           This driver can also be built as a module.  If so, the module
 858           will be called max1111.
 859
 860 config SENSORS_MAX16065
 861         tristate "Maxim MAX16065 System Manager and compatibles"
 862         depends on I2C
 863         help
 864           If you say yes here you get support for hardware monitoring
 865           capabilities of the following Maxim System Manager chips.
 866             MAX16065
 867             MAX16066
 868             MAX16067
 869             MAX16068
 870             MAX16070
 871             MAX16071
 872
 873           This driver can also be built as a module.  If so, the module
 874           will be called max16065.
 875
 876 config SENSORS_MAX1619
 877         tristate "Maxim MAX1619 sensor chip"
 878         depends on I2C
 879         help
 880           If you say yes here you get support for MAX1619 sensor chip.
 881
 882           This driver can also be built as a module.  If so, the module
 883           will be called max1619.
 884
 885 config SENSORS_MAX1668
 886         tristate "Maxim MAX1668 and compatibles"
 887         depends on I2C
 888         help
 889           If you say yes here you get support for MAX1668, MAX1989 and
 890           MAX1805 chips.
 891
 892           This driver can also be built as a module.  If so, the module
 893           will be called max1668.
 894
 895 config SENSORS_MAX197
 896         tristate "Maxim MAX197 and compatibles"
 897         help
 898           Support for the Maxim MAX197 A/D converter.
 899           Support will include, but not be limited to, MAX197, and MAX199.
 900
 901           This driver can also be built as a module. If so, the module
 902           will be called max197.
 903
 904 config SENSORS_MAX6639
 905         tristate "Maxim MAX6639 sensor chip"
 906         depends on I2C
 907         help
 908           If you say yes here you get support for the MAX6639
 909           sensor chips.
 910
 911           This driver can also be built as a module.  If so, the module
 912           will be called max6639.
 913
 914 config SENSORS_MAX6642
 915         tristate "Maxim MAX6642 sensor chip"
 916         depends on I2C
 917         help
 918           If you say yes here you get support for MAX6642 sensor chip.
 919           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 920           with Overtemperature Alarm from Maxim.
 921
 922           This driver can also be built as a module.  If so, the module
 923           will be called max6642.
 924
 925 config SENSORS_MAX6650
 926         tristate "Maxim MAX6650 sensor chip"
 927         depends on I2C
 928         help
 929           If you say yes here you get support for the MAX6650 / MAX6651
 930           sensor chips.
 931
 932           This driver can also be built as a module.  If so, the module
 933           will be called max6650.
 934
 935 config SENSORS_MAX6697
 936         tristate "Maxim MAX6697 and compatibles"
 937         depends on I2C
 938         help
 939           If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 940           MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 941           temperature sensor chips.
 942
 943           This driver can also be built as a module.  If so, the module
 944           will be called max6697.
 945
 946 config SENSORS_MCP3021
 947         tristate "Microchip MCP3021 and compatibles"
 948         depends on I2C
 949         help
 950           If you say yes here you get support for MCP3021 and MCP3221.
 951           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 952           with 12-bit resolution.
 953
 954           This driver can also be built as a module.  If so, the module
 955           will be called mcp3021.
 956
 957 config SENSORS_NCT6775
 958         tristate "Nuvoton NCT6775F and compatibles"
 959         depends on !PPC
 960         select HWMON_VID
 961         help
 962           If you say yes here you get support for the hardware monitoring
 963           functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
 964           and compatible Super-I/O chips. This driver replaces the
 965           w83627ehf driver for NCT6775F and NCT6776F.
 966
 967           This driver can also be built as a module.  If so, the module
 968           will be called nct6775.
 969
 970 config SENSORS_NTC_THERMISTOR
 971         tristate "NTC thermistor support"
 972         depends on (!OF && !IIO) || (OF && IIO)
 973         help
 974           This driver supports NTC thermistors sensor reading and its
 975           interpretation. The driver can also monitor the temperature and
 976           send notifications about the temperature.
 977
 978           Currently, this driver supports
 979           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 980
 981           This driver can also be built as a module.  If so, the module
 982           will be called ntc-thermistor.
 983
 984 config SENSORS_PC87360
 985         tristate "National Semiconductor PC87360 family"
 986         depends on !PPC
 987         select HWMON_VID
 988         help
 989           If you say yes here you get access to the hardware monitoring
 990           functions of the National Semiconductor PC8736x Super-I/O chips.
 991           The PC87360, PC87363 and PC87364 only have fan monitoring and
 992           control.  The PC87365 and PC87366 additionally have voltage and
 993           temperature monitoring.
 994
 995           This driver can also be built as a module.  If so, the module
 996           will be called pc87360.
 997
 998 config SENSORS_PC87427
 999         tristate "National Semiconductor PC87427"
1000         depends on !PPC
1001         help
1002           If you say yes here you get access to the hardware monitoring
1003           functions of the National Semiconductor PC87427 Super-I/O chip.
1004           The chip has two distinct logical devices, one for fan speed
1005           monitoring and control, and one for voltage and temperature
1006           monitoring. Fan speed monitoring and control are supported, as
1007           well as temperature monitoring. Voltages aren't supported yet.
1008
1009           This driver can also be built as a module.  If so, the module
1010           will be called pc87427.
1011
1012 config SENSORS_PCF8591
1013         tristate "Philips PCF8591 ADC/DAC"
1014         depends on I2C
1015         default n
1016         help
1017           If you say yes here you get support for Philips PCF8591 4-channel
1018           ADC, 1-channel DAC chips.
1019
1020           This driver can also be built as a module.  If so, the module
1021           will be called pcf8591.
1022
1023           These devices are hard to detect and rarely found on mainstream
1024           hardware.  If unsure, say N.
1025
1026 source drivers/hwmon/pmbus/Kconfig
1027
1028 config SENSORS_SHT15
1029         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1030         depends on GPIOLIB
1031         help
1032           If you say yes here you get support for the Sensiron SHT10, SHT11,
1033           SHT15, SHT71, SHT75 humidity and temperature sensors.
1034
1035           This driver can also be built as a module.  If so, the module
1036           will be called sht15.
1037
1038 config SENSORS_SHT21
1039         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1040         depends on I2C
1041         help
1042           If you say yes here you get support for the Sensiron SHT21, SHT25
1043           humidity and temperature sensors.
1044
1045           This driver can also be built as a module.  If so, the module
1046           will be called sht21.
1047
1048 config SENSORS_S3C
1049         tristate "Samsung built-in ADC"
1050         depends on S3C_ADC
1051         help
1052           If you say yes here you get support for the on-board ADCs of
1053           the Samsung S3C24XX, S3C64XX and other series of SoC
1054
1055           This driver can also be built as a module. If so, the module
1056           will be called s3c-hwmon.
1057
1058 config SENSORS_S3C_RAW
1059         bool "Include raw channel attributes in sysfs"
1060         depends on SENSORS_S3C
1061         help
1062           Say Y here if you want to include raw copies of all the ADC
1063           channels in sysfs.
1064
1065 config SENSORS_SIS5595
1066         tristate "Silicon Integrated Systems Corp. SiS5595"
1067         depends on PCI
1068         help
1069           If you say yes here you get support for the integrated sensors in
1070           SiS5595 South Bridges.
1071
1072           This driver can also be built as a module.  If so, the module
1073           will be called sis5595.
1074
1075 config SENSORS_SMM665
1076         tristate "Summit Microelectronics SMM665"
1077         depends on I2C
1078         default n
1079         help
1080           If you say yes here you get support for the hardware monitoring
1081           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1082           Active DC Output Controller / Monitor.
1083
1084           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1085           Support for those chips is untested.
1086
1087           This driver can also be built as a module. If so, the module will
1088           be called smm665.
1089
1090 config SENSORS_DME1737
1091         tristate "SMSC DME1737, SCH311x and compatibles"
1092         depends on I2C && !PPC
1093         select HWMON_VID
1094         help
1095           If you say yes here you get support for the hardware monitoring
1096           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1097           Asus A8000 Super-I/O chips.
1098
1099           This driver can also be built as a module.  If so, the module
1100           will be called dme1737.
1101
1102 config SENSORS_EMC1403
1103         tristate "SMSC EMC1403/23 thermal sensor"
1104         depends on I2C
1105         help
1106           If you say yes here you get support for the SMSC EMC1403/23
1107           temperature monitoring chip.
1108
1109           Threshold values can be configured using sysfs.
1110           Data from the different diodes are accessible via sysfs.
1111
1112 config SENSORS_EMC2103
1113         tristate "SMSC EMC2103"
1114         depends on I2C
1115         help
1116           If you say yes here you get support for the temperature
1117           and fan sensors of the SMSC EMC2103 chips.
1118
1119           This driver can also be built as a module.  If so, the module
1120           will be called emc2103.
1121
1122 config SENSORS_EMC6W201
1123         tristate "SMSC EMC6W201"
1124         depends on I2C
1125         help
1126           If you say yes here you get support for the SMSC EMC6W201
1127           hardware monitoring chip.
1128
1129           This driver can also be built as a module.  If so, the module
1130           will be called emc6w201.
1131
1132 config SENSORS_SMSC47M1
1133         tristate "SMSC LPC47M10x and compatibles"
1134         depends on !PPC
1135         help
1136           If you say yes here you get support for the integrated fan
1137           monitoring and control capabilities of the SMSC LPC47B27x,
1138           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1139           LPC47M192, LPC47M292 and LPC47M997 chips.
1140
1141           The temperature and voltage sensor features of the LPC47M15x,
1142           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1143           driver, select also "SMSC LPC47M192 and compatibles" below for
1144           those.
1145
1146           This driver can also be built as a module.  If so, the module
1147           will be called smsc47m1.
1148
1149 config SENSORS_SMSC47M192
1150         tristate "SMSC LPC47M192 and compatibles"
1151         depends on I2C
1152         select HWMON_VID
1153         help
1154           If you say yes here you get support for the temperature and
1155           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1156           and LPC47M997 chips.
1157
1158           The fan monitoring and control capabilities of these chips
1159           are supported by another driver, select
1160           "SMSC LPC47M10x and compatibles" above. You need both drivers
1161           if you want fan control and voltage/temperature sensor support.
1162
1163           This driver can also be built as a module.  If so, the module
1164           will be called smsc47m192.
1165
1166 config SENSORS_SMSC47B397
1167         tristate "SMSC LPC47B397-NC"
1168         depends on !PPC
1169         help
1170           If you say yes here you get support for the SMSC LPC47B397-NC
1171           sensor chip.
1172
1173           This driver can also be built as a module.  If so, the module
1174           will be called smsc47b397.
1175
1176 config SENSORS_SCH56XX_COMMON
1177         tristate
1178         default n
1179
1180 config SENSORS_SCH5627
1181         tristate "SMSC SCH5627"
1182         depends on !PPC && WATCHDOG
1183         select SENSORS_SCH56XX_COMMON
1184         select WATCHDOG_CORE
1185         help
1186           If you say yes here you get support for the hardware monitoring
1187           features of the SMSC SCH5627 Super-I/O chip including support for
1188           the integrated watchdog.
1189
1190           This driver can also be built as a module.  If so, the module
1191           will be called sch5627.
1192
1193 config SENSORS_SCH5636
1194         tristate "SMSC SCH5636"
1195         depends on !PPC && WATCHDOG
1196         select SENSORS_SCH56XX_COMMON
1197         select WATCHDOG_CORE
1198         help
1199           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1200           hardware monitoring solutions, allowing motherboard manufacturers to
1201           create their own custom hwmon solution based upon the SCH5636.
1202
1203           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1204           hwmon solution. Say yes here if you want support for the Fujitsu
1205           Theseus' hardware monitoring features including support for the
1206           integrated watchdog.
1207
1208           This driver can also be built as a module.  If so, the module
1209           will be called sch5636.
1210
1211 config SENSORS_ADS1015
1212         tristate "Texas Instruments ADS1015"
1213         depends on I2C
1214         help
1215           If you say yes here you get support for Texas Instruments
1216           ADS1015/ADS1115 12/16-bit 4-input ADC device.
1217
1218           This driver can also be built as a module.  If so, the module
1219           will be called ads1015.
1220
1221 config SENSORS_ADS7828
1222         tristate "Texas Instruments ADS7828 and compatibles"
1223         depends on I2C
1224         help
1225           If you say yes here you get support for Texas Instruments ADS7828 and
1226           ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1227           it is 8-bit on ADS7830.
1228
1229           This driver can also be built as a module.  If so, the module
1230           will be called ads7828.
1231
1232 config SENSORS_ADS7871
1233         tristate "Texas Instruments ADS7871 A/D converter"
1234         depends on SPI
1235         help
1236           If you say yes here you get support for TI ADS7871 & ADS7870
1237
1238           This driver can also be built as a module.  If so, the module
1239           will be called ads7871.
1240
1241 config SENSORS_AMC6821
1242         tristate "Texas Instruments AMC6821"
1243         depends on I2C
1244         help
1245           If you say yes here you get support for the Texas Instruments
1246           AMC6821 hardware monitoring chips.
1247
1248           This driver can also be build as a module.  If so, the module
1249           will be called amc6821.
1250
1251 config SENSORS_INA209
1252         tristate "TI / Burr Brown INA209"
1253         depends on I2C
1254         help
1255           If you say yes here you get support for the TI / Burr Brown INA209
1256           voltage / current / power monitor I2C interface.
1257
1258           This driver can also be built as a module. If so, the module will
1259           be called ina209.
1260
1261 config SENSORS_INA2XX
1262         tristate "Texas Instruments INA219 and compatibles"
1263         depends on I2C
1264         help
1265           If you say yes here you get support for INA219, INA220, INA226, and
1266           INA230 power monitor chips.
1267
1268           The INA2xx driver is configured for the default configuration of
1269           the part as described in the datasheet.
1270           Default value for Rshunt is 10 mOhms.
1271           This driver can also be built as a module.  If so, the module
1272           will be called ina2xx.
1273
1274 config SENSORS_THMC50
1275         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1276         depends on I2C
1277         help
1278           If you say yes here you get support for Texas Instruments THMC50
1279           sensor chips and clones: the Analog Devices ADM1022.
1280
1281           This driver can also be built as a module.  If so, the module
1282           will be called thmc50.
1283
1284 config SENSORS_TMP102
1285         tristate "Texas Instruments TMP102"
1286         depends on I2C
1287         help
1288           If you say yes here you get support for Texas Instruments TMP102
1289           sensor chips.
1290
1291           This driver can also be built as a module.  If so, the module
1292           will be called tmp102.
1293
1294 config SENSORS_TMP401
1295         tristate "Texas Instruments TMP401 and compatibles"
1296         depends on I2C
1297         help
1298           If you say yes here you get support for Texas Instruments TMP401,
1299           TMP411, TMP431, and TMP432 temperature sensor chips.
1300
1301           This driver can also be built as a module.  If so, the module
1302           will be called tmp401.
1303
1304 config SENSORS_TMP421
1305         tristate "Texas Instruments TMP421 and compatible"
1306         depends on I2C
1307         help
1308           If you say yes here you get support for Texas Instruments TMP421,
1309           TMP422 and TMP423 temperature sensor chips.
1310
1311           This driver can also be built as a module.  If so, the module
1312           will be called tmp421.
1313
1314 config SENSORS_TWL4030_MADC
1315         tristate "Texas Instruments TWL4030 MADC Hwmon"
1316         depends on TWL4030_MADC
1317         help
1318         If you say yes here you get hwmon support for triton
1319         TWL4030-MADC.
1320
1321         This driver can also be built as a module. If so it will be called
1322         twl4030-madc-hwmon.
1323
1324 config SENSORS_VEXPRESS
1325         tristate "Versatile Express"
1326         depends on VEXPRESS_CONFIG
1327         help
1328           This driver provides support for hardware sensors available on
1329           the ARM Ltd's Versatile Express platform. It can provide wide
1330           range of information like temperature, power, energy.
1331
1332 config SENSORS_VIA_CPUTEMP
1333         tristate "VIA CPU temperature sensor"
1334         depends on X86
1335         select HWMON_VID
1336         help
1337           If you say yes here you get support for the temperature
1338           sensor inside your CPU. Supported are all known variants of
1339           the VIA C7 and Nano.
1340
1341 config SENSORS_VIA686A
1342         tristate "VIA686A"
1343         depends on PCI
1344         help
1345           If you say yes here you get support for the integrated sensors in
1346           Via 686A/B South Bridges.
1347
1348           This driver can also be built as a module.  If so, the module
1349           will be called via686a.
1350
1351 config SENSORS_VT1211
1352         tristate "VIA VT1211"
1353         depends on !PPC
1354         select HWMON_VID
1355         help
1356           If you say yes here then you get support for hardware monitoring
1357           features of the VIA VT1211 Super-I/O chip.
1358
1359           This driver can also be built as a module.  If so, the module
1360           will be called vt1211.
1361
1362 config SENSORS_VT8231
1363         tristate "VIA VT8231"
1364         depends on PCI
1365         select HWMON_VID
1366         help
1367           If you say yes here then you get support for the integrated sensors
1368           in the VIA VT8231 device.
1369
1370           This driver can also be built as a module.  If so, the module
1371           will be called vt8231.
1372
1373 config SENSORS_W83781D
1374         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1375         depends on I2C
1376         select HWMON_VID
1377         help
1378           If you say yes here you get support for the Winbond W8378x series
1379           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1380           Asus AS99127F.
1381
1382           This driver can also be built as a module.  If so, the module
1383           will be called w83781d.
1384
1385 config SENSORS_W83791D
1386         tristate "Winbond W83791D"
1387         depends on I2C
1388         select HWMON_VID
1389         help
1390           If you say yes here you get support for the Winbond W83791D chip.
1391
1392           This driver can also be built as a module.  If so, the module
1393           will be called w83791d.
1394
1395 config SENSORS_W83792D
1396         tristate "Winbond W83792D"
1397         depends on I2C
1398         help
1399           If you say yes here you get support for the Winbond W83792D chip.
1400
1401           This driver can also be built as a module.  If so, the module
1402           will be called w83792d.
1403
1404 config SENSORS_W83793
1405         tristate "Winbond W83793"
1406         depends on I2C
1407         select HWMON_VID
1408         help
1409           If you say yes here you get support for the Winbond W83793
1410           hardware monitoring chip, including support for the integrated
1411           watchdog.
1412
1413           This driver can also be built as a module.  If so, the module
1414           will be called w83793.
1415
1416 config SENSORS_W83795
1417         tristate "Winbond/Nuvoton W83795G/ADG"
1418         depends on I2C
1419         help
1420           If you say yes here you get support for the Winbond W83795G and
1421           W83795ADG hardware monitoring chip, including manual fan speed
1422           control.
1423
1424           This driver can also be built as a module.  If so, the module
1425           will be called w83795.
1426
1427 config SENSORS_W83795_FANCTRL
1428         boolean "Include automatic fan control support (DANGEROUS)"
1429         depends on SENSORS_W83795
1430         default n
1431         help
1432           If you say yes here, support for automatic fan speed control
1433           will be included in the driver.
1434
1435           This part of the code wasn't carefully reviewed and tested yet,
1436           so enabling this option is strongly discouraged on production
1437           servers. Only developers and testers should enable it for the
1438           time being.
1439
1440           Please also note that this option will create sysfs attribute
1441           files which may change in the future, so you shouldn't rely
1442           on them being stable.
1443
1444 config SENSORS_W83L785TS
1445         tristate "Winbond W83L785TS-S"
1446         depends on I2C
1447         help
1448           If you say yes here you get support for the Winbond W83L785TS-S
1449           sensor chip, which is used on the Asus A7N8X, among other
1450           motherboards.
1451
1452           This driver can also be built as a module.  If so, the module
1453           will be called w83l785ts.
1454
1455 config SENSORS_W83L786NG
1456         tristate "Winbond W83L786NG, W83L786NR"
1457         depends on I2C
1458         help
1459           If you say yes here you get support for the Winbond W83L786NG
1460           and W83L786NR sensor chips.
1461
1462           This driver can also be built as a module.  If so, the module
1463           will be called w83l786ng.
1464
1465 config SENSORS_W83627HF
1466         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1467         depends on !PPC
1468         select HWMON_VID
1469         help
1470           If you say yes here you get support for the Winbond W836X7 series
1471           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1472           W83697HF.
1473
1474           This driver can also be built as a module.  If so, the module
1475           will be called w83627hf.
1476
1477 config SENSORS_W83627EHF
1478         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1479         depends on !PPC
1480         select HWMON_VID
1481         help
1482           If you say yes here you get support for the hardware
1483           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1484
1485           This driver also supports the W83627EHG, which is the lead-free
1486           version of the W83627EHF, and the W83627DHG, which is a similar
1487           chip suited for specific Intel processors that use PECI such as
1488           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1489           version of the W83627DHG (as far as hardware monitoring goes.)
1490
1491           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1492           (also known as W83667HG-I), and NCT6776F.
1493
1494           This driver can also be built as a module.  If so, the module
1495           will be called w83627ehf.
1496
1497 config SENSORS_WM831X
1498         tristate "WM831x PMICs"
1499         depends on MFD_WM831X
1500         help
1501           If you say yes here you get support for the hardware
1502           monitoring functionality of the Wolfson Microelectronics
1503           WM831x series of PMICs.
1504
1505           This driver can also be built as a module.  If so, the module
1506           will be called wm831x-hwmon.
1507
1508 config SENSORS_WM8350
1509         tristate "Wolfson Microelectronics WM835x"
1510         depends on MFD_WM8350
1511         help
1512           If you say yes here you get support for the hardware
1513           monitoring features of the WM835x series of PMICs.
1514
1515           This driver can also be built as a module.  If so, the module
1516           will be called wm8350-hwmon.
1517
1518 config SENSORS_ULTRA45
1519         tristate "Sun Ultra45 PIC16F747"
1520         depends on SPARC64
1521         help
1522           This driver provides support for the Ultra45 workstation environmental
1523           sensors.
1524
1525 config SENSORS_APPLESMC
1526         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1527         depends on INPUT && X86
1528         select NEW_LEDS
1529         select LEDS_CLASS
1530         select INPUT_POLLDEV
1531         default n
1532         help
1533           This driver provides support for the Apple System Management
1534           Controller, which provides an accelerometer (Apple Sudden Motion
1535           Sensor), light sensors, temperature sensors, keyboard backlight
1536           control and fan control.
1537
1538           Only Intel-based Apple's computers are supported (MacBook Pro,
1539           MacBook, MacMini).
1540
1541           Data from the different sensors, keyboard backlight control and fan
1542           control are accessible via sysfs.
1543
1544           This driver also provides an absolute input class device, allowing
1545           the laptop to act as a pinball machine-esque joystick.
1546
1547           Say Y here if you have an applicable laptop and want to experience
1548           the awesome power of applesmc.
1549
1550 config SENSORS_MC13783_ADC
1551         tristate "Freescale MC13783/MC13892 ADC"
1552         depends on MFD_MC13XXX
1553         help
1554           Support for the A/D converter on MC13783 and MC13892 PMIC.
1555
1556 if ACPI
1557
1558 comment "ACPI drivers"
1559
1560 config SENSORS_ACPI_POWER
1561         tristate "ACPI 4.0 power meter"
1562         help
1563           This driver exposes ACPI 4.0 power meters as hardware monitoring
1564           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1565           and a power meter.
1566
1567           To compile this driver as a module, choose M here:
1568           the module will be called acpi_power_meter.
1569
1570 config SENSORS_ATK0110
1571         tristate "ASUS ATK0110"
1572         depends on X86
1573         help
1574           If you say yes here you get support for the ACPI hardware
1575           monitoring interface found in many ASUS motherboards. This
1576           driver will provide readings of fans, voltages and temperatures
1577           through the system firmware.
1578
1579           This driver can also be built as a module. If so, the module
1580           will be called asus_atk0110.
1581
1582 endif # ACPI
1583
1584 endif # HWMON