drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && DMI
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && DMI
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7314
  72         tristate "Analog Devices AD7314 and compatibles"
  73         depends on SPI
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7314, ADT7301 and ADT7302 temperature sensors.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7314.
  80
  81 config SENSORS_AD7414
  82         tristate "Analog Devices AD7414"
  83         depends on I2C
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7414 temperature monitoring chip.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7414.
  90
  91 config SENSORS_AD7418
  92         tristate "Analog Devices AD7416, AD7417 and AD7418"
  93         depends on I2C
  94         help
  95           If you say yes here you get support for the Analog Devices
  96           AD7416, AD7417 and AD7418 temperature monitoring chips.
  97
  98           This driver can also be built as a module. If so, the module
  99           will be called ad7418.
 100
 101 config SENSORS_ADCXX
 102         tristate "National Semiconductor ADCxxxSxxx"
 103         depends on SPI_MASTER
 104         help
 105           If you say yes here you get support for the National Semiconductor
 106           ADC<bb><c>S<sss> chip family, where
 107           * bb  is the resolution in number of bits (8, 10, 12)
 108           * c   is the number of channels (1, 2, 4, 8)
 109           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 110             kSPS and 101 for 1 MSPS)
 111
 112           Examples : ADC081S101, ADC124S501, ...
 113
 114           This driver can also be built as a module.  If so, the module
 115           will be called adcxx.
 116
 117 config SENSORS_ADM1021
 118         tristate "Analog Devices ADM1021 and compatibles"
 119         depends on I2C
 120         help
 121           If you say yes here you get support for Analog Devices ADM1021
 122           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 123           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 124
 125           This driver can also be built as a module.  If so, the module
 126           will be called adm1021.
 127
 128 config SENSORS_ADM1025
 129         tristate "Analog Devices ADM1025 and compatibles"
 130         depends on I2C
 131         select HWMON_VID
 132         help
 133           If you say yes here you get support for Analog Devices ADM1025
 134           and Philips NE1619 sensor chips.
 135
 136           This driver can also be built as a module.  If so, the module
 137           will be called adm1025.
 138
 139 config SENSORS_ADM1026
 140         tristate "Analog Devices ADM1026 and compatibles"
 141         depends on I2C
 142         select HWMON_VID
 143         help
 144           If you say yes here you get support for Analog Devices ADM1026
 145           sensor chip.
 146
 147           This driver can also be built as a module.  If so, the module
 148           will be called adm1026.
 149
 150 config SENSORS_ADM1029
 151         tristate "Analog Devices ADM1029"
 152         depends on I2C
 153         help
 154           If you say yes here you get support for Analog Devices ADM1029
 155           sensor chip.
 156           Very rare chip, please let us know you use it.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1029.
 160
 161 config SENSORS_ADM1031
 162         tristate "Analog Devices ADM1031 and compatibles"
 163         depends on I2C
 164         help
 165           If you say yes here you get support for Analog Devices ADM1031
 166           and ADM1030 sensor chips.
 167
 168           This driver can also be built as a module.  If so, the module
 169           will be called adm1031.
 170
 171 config SENSORS_ADM9240
 172         tristate "Analog Devices ADM9240 and compatibles"
 173         depends on I2C
 174         select HWMON_VID
 175         help
 176           If you say yes here you get support for Analog Devices ADM9240,
 177           Dallas DS1780, National Semiconductor LM81 sensor chips.
 178
 179           This driver can also be built as a module.  If so, the module
 180           will be called adm9240.
 181
 182 config SENSORS_ADT7410
 183         tristate "Analog Devices ADT7410"
 184         depends on I2C
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7410 temperature monitoring chip.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7410.
 191
 192 config SENSORS_ADT7411
 193         tristate "Analog Devices ADT7411"
 194         depends on I2C
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7411 voltage and temperature monitoring chip.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7411.
 201
 202 config SENSORS_ADT7462
 203         tristate "Analog Devices ADT7462"
 204         depends on I2C
 205         help
 206           If you say yes here you get support for the Analog Devices
 207           ADT7462 temperature monitoring chips.
 208
 209           This driver can also be built as a module. If so, the module
 210           will be called adt7462.
 211
 212 config SENSORS_ADT7470
 213         tristate "Analog Devices ADT7470"
 214         depends on I2C
 215         help
 216           If you say yes here you get support for the Analog Devices
 217           ADT7470 temperature monitoring chips.
 218
 219           This driver can also be built as a module. If so, the module
 220           will be called adt7470.
 221
 222 config SENSORS_ADT7475
 223         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 224         depends on I2C
 225         select HWMON_VID
 226         help
 227           If you say yes here you get support for the Analog Devices
 228           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 229           chips.
 230
 231           This driver can also be build as a module.  If so, the module
 232           will be called adt7475.
 233
 234 config SENSORS_ASC7621
 235         tristate "Andigilog aSC7621"
 236         depends on I2C
 237         help
 238           If you say yes here you get support for the aSC7621
 239           family of SMBus sensors chip found on most Intel X38, X48, X58,
 240           945, 965 and 975 desktop boards.  Currently supported chips:
 241           aSC7621
 242           aSC7621a
 243
 244           This driver can also be built as a module.  If so, the module
 245           will be called asc7621.
 246
 247 config SENSORS_K8TEMP
 248         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 249         depends on X86 && PCI
 250         help
 251           If you say yes here you get support for the temperature
 252           sensor(s) inside your CPU. Supported is whole AMD K8
 253           microarchitecture. Please note that you will need at least
 254           lm-sensors 2.10.1 for proper userspace support.
 255
 256           This driver can also be built as a module.  If so, the module
 257           will be called k8temp.
 258
 259 config SENSORS_K10TEMP
 260         tristate "AMD Family 10h+ temperature sensor"
 261         depends on X86 && PCI
 262         help
 263           If you say yes here you get support for the temperature
 264           sensor(s) inside your CPU. Supported are later revisions of
 265           the AMD Family 10h and all revisions of the AMD Family 11h,
 266           12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
 267           microarchitectures.
 268
 269           This driver can also be built as a module.  If so, the module
 270           will be called k10temp.
 271
 272 config SENSORS_FAM15H_POWER
 273         tristate "AMD Family 15h processor power"
 274         depends on X86 && PCI
 275         help
 276           If you say yes here you get support for processor power
 277           information of your AMD family 15h CPU.
 278
 279           This driver can also be built as a module.  If so, the module
 280           will be called fam15h_power.
 281
 282 config SENSORS_ASB100
 283         tristate "Asus ASB100 Bach"
 284         depends on X86 && I2C
 285         select HWMON_VID
 286         help
 287           If you say yes here you get support for the ASB100 Bach sensor
 288           chip found on some Asus mainboards.
 289
 290           This driver can also be built as a module.  If so, the module
 291           will be called asb100.
 292
 293 config SENSORS_ATXP1
 294         tristate "Attansic ATXP1 VID controller"
 295         depends on I2C
 296         select HWMON_VID
 297         help
 298           If you say yes here you get support for the Attansic ATXP1 VID
 299           controller.
 300
 301           If your board have such a chip, you are able to control your CPU
 302           core and other voltages.
 303
 304           This driver can also be built as a module.  If so, the module
 305           will be called atxp1.
 306
 307 config SENSORS_DS620
 308         tristate "Dallas Semiconductor DS620"
 309         depends on I2C
 310         help
 311           If you say yes here you get support for Dallas Semiconductor
 312           DS620 sensor chip.
 313
 314           This driver can also be built as a module.  If so, the module
 315           will be called ds620.
 316
 317 config SENSORS_DS1621
 318         tristate "Dallas Semiconductor DS1621 and DS1625"
 319         depends on I2C
 320         help
 321           If you say yes here you get support for Dallas Semiconductor
 322           DS1621 and DS1625 sensor chips.
 323
 324           This driver can also be built as a module.  If so, the module
 325           will be called ds1621.
 326
 327 config SENSORS_DA9052_ADC
 328         tristate "Dialog DA9052/DA9053 ADC"
 329         depends on PMIC_DA9052
 330         help
 331           Say y here to support the ADC found on Dialog Semiconductor
 332           DA9052-BC and DA9053-AA/Bx PMICs.
 333
 334           This driver can also be built as module. If so, the module
 335           will be called da9052-hwmon.
 336
 337 config SENSORS_I5K_AMB
 338         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 339         depends on PCI
 340         help
 341           If you say yes here you get support for FB-DIMM AMB temperature
 342           monitoring chips on systems with the Intel 5000 series chipset.
 343
 344           This driver can also be built as a module. If so, the module
 345           will be called i5k_amb.
 346
 347 config SENSORS_F71805F
 348         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 349         depends on !PPC
 350         help
 351           If you say yes here you get support for hardware monitoring
 352           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 353           Super-I/O chips.
 354
 355           This driver can also be built as a module.  If so, the module
 356           will be called f71805f.
 357
 358 config SENSORS_F71882FG
 359         tristate "Fintek F71882FG and compatibles"
 360         depends on !PPC
 361         help
 362           If you say yes here you get support for hardware monitoring
 363           features of many Fintek Super-I/O (LPC) chips. The currently
 364           supported chips are:
 365             F71808E/A
 366             F71858FG
 367             F71862FG
 368             F71863FG
 369             F71869F/E/A
 370             F71882FG
 371             F71883FG
 372             F71889FG/ED/A
 373             F8000
 374             F81801U
 375             F81865F
 376
 377           This driver can also be built as a module.  If so, the module
 378           will be called f71882fg.
 379
 380 config SENSORS_F75375S
 381         tristate "Fintek F75375S/SP, F75373 and F75387"
 382         depends on I2C
 383         help
 384           If you say yes here you get support for hardware monitoring
 385           features of the Fintek F75375S/SP, F75373 and F75387
 386
 387           This driver can also be built as a module.  If so, the module
 388           will be called f75375s.
 389
 390 config SENSORS_FSCHMD
 391         tristate "Fujitsu Siemens Computers sensor chips"
 392         depends on X86 && I2C
 393         help
 394           If you say yes here you get support for the following Fujitsu
 395           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 396           Heimdall, Heracles, Hades and Syleus including support for the
 397           integrated watchdog.
 398
 399           This is a merged driver for FSC sensor chips replacing the fscpos,
 400           fscscy and fscher drivers and adding support for several other FSC
 401           sensor chips.
 402
 403           This driver can also be built as a module.  If so, the module
 404           will be called fschmd.
 405
 406 config SENSORS_G760A
 407         tristate "GMT G760A"
 408         depends on I2C
 409         help
 410           If you say yes here you get support for Global Mixed-mode
 411           Technology Inc G760A fan speed PWM controller chips.
 412
 413           This driver can also be built as a module.  If so, the module
 414           will be called g760a.
 415
 416 config SENSORS_GL518SM
 417         tristate "Genesys Logic GL518SM"
 418         depends on I2C
 419         help
 420           If you say yes here you get support for Genesys Logic GL518SM
 421           sensor chips.
 422
 423           This driver can also be built as a module.  If so, the module
 424           will be called gl518sm.
 425
 426 config SENSORS_GL520SM
 427         tristate "Genesys Logic GL520SM"
 428         depends on I2C
 429         select HWMON_VID
 430         help
 431           If you say yes here you get support for Genesys Logic GL520SM
 432           sensor chips.
 433
 434           This driver can also be built as a module.  If so, the module
 435           will be called gl520sm.
 436
 437 config SENSORS_GPIO_FAN
 438         tristate "GPIO fan"
 439         depends on GPIOLIB
 440         help
 441           If you say yes here you get support for fans connected to GPIO lines.
 442
 443           This driver can also be built as a module.  If so, the module
 444           will be called gpio-fan.
 445
 446 config SENSORS_HIH6130
 447         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 448         depends on I2C
 449         help
 450           If you say yes here you get support for Honeywell Humidicon
 451           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 452
 453           This driver can also be built as a module.  If so, the module
 454           will be called hih6130.
 455
 456 config SENSORS_CORETEMP
 457         tristate "Intel Core/Core2/Atom temperature sensor"
 458         depends on X86 && PCI
 459         help
 460           If you say yes here you get support for the temperature
 461           sensor inside your CPU. Most of the family 6 CPUs
 462           are supported. Check Documentation/hwmon/coretemp for details.
 463
 464 config SENSORS_IBMAEM
 465         tristate "IBM Active Energy Manager temperature/power sensors and control"
 466         select IPMI_SI
 467         depends on IPMI_HANDLER
 468         help
 469           If you say yes here you get support for the temperature and
 470           power sensors and capping hardware in various IBM System X
 471           servers that support Active Energy Manager.  This includes
 472           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 473           and certain HC10/HS2x/LS2x/QS2x blades.
 474
 475           This driver can also be built as a module.  If so, the module
 476           will be called ibmaem.
 477
 478 config SENSORS_IBMPEX
 479         tristate "IBM PowerExecutive temperature/power sensors"
 480         select IPMI_SI
 481         depends on IPMI_HANDLER
 482         help
 483           If you say yes here you get support for the temperature and
 484           power sensors in various IBM System X servers that support
 485           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 486           x3655, and x3755; the x3800, x3850, and x3950 models that have
 487           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 488
 489           This driver can also be built as a module.  If so, the module
 490           will be called ibmpex.
 491
 492 config SENSORS_IT87
 493         tristate "ITE IT87xx and compatibles"
 494         depends on !PPC
 495         select HWMON_VID
 496         help
 497           If you say yes here you get support for ITE IT8705F, IT8712F,
 498           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 499           IT8782F, and IT8783E/F sensor chips, and the SiS950 clone.
 500
 501           This driver can also be built as a module.  If so, the module
 502           will be called it87.
 503
 504 config SENSORS_JZ4740
 505         tristate "Ingenic JZ4740 SoC ADC driver"
 506         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 507         help
 508           If you say yes here you get support for reading adc values from the ADCIN
 509           pin on Ingenic JZ4740 SoC based boards.
 510
 511           This driver can also be build as a module. If so, the module will be
 512           called jz4740-hwmon.
 513
 514 config SENSORS_JC42
 515         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 516         depends on I2C
 517         help
 518           If you say yes here, you get support for JEDEC JC42.4 compliant
 519           temperature sensors, which are used on many DDR3 memory modules for
 520           mobile devices and servers.  Support will include, but not be limited
 521           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 522           MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
 523           STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 524
 525           This driver can also be built as a module.  If so, the module
 526           will be called jc42.
 527
 528 config SENSORS_LINEAGE
 529         tristate "Lineage Compact Power Line Power Entry Module"
 530         depends on I2C
 531         help
 532           If you say yes here you get support for the Lineage Compact Power Line
 533           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 534           CP2000DC, CP2725, and others.
 535
 536           This driver can also be built as a module.  If so, the module
 537           will be called lineage-pem.
 538
 539 config SENSORS_LM63
 540         tristate "National Semiconductor LM63 and compatibles"
 541         depends on I2C
 542         help
 543           If you say yes here you get support for the National
 544           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 545           sensors with integrated fan control.  Such chips are found
 546           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 547           others.
 548
 549           This driver can also be built as a module.  If so, the module
 550           will be called lm63.
 551
 552 config SENSORS_LM70
 553         tristate "National Semiconductor LM70 and compatibles"
 554         depends on SPI_MASTER
 555         help
 556           If you say yes here you get support for the National Semiconductor
 557           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 558           ture sensor chips.
 559
 560           This driver can also be built as a module.  If so, the module
 561           will be called lm70.
 562
 563 config SENSORS_LM73
 564         tristate "National Semiconductor LM73"
 565         depends on I2C
 566         help
 567           If you say yes here you get support for National Semiconductor LM73
 568           sensor chips.
 569           This driver can also be built as a module.  If so, the module
 570           will be called lm73.
 571
 572 config SENSORS_LM75
 573         tristate "National Semiconductor LM75 and compatibles"
 574         depends on I2C
 575         help
 576           If you say yes here you get support for one common type of
 577           temperature sensor chip, with models including:
 578
 579                 - Analog Devices ADT75
 580                 - Dallas Semiconductor DS75 and DS1775
 581                 - Maxim MAX6625 and MAX6626
 582                 - Microchip MCP980x
 583                 - National Semiconductor LM75, LM75A
 584                 - NXP's LM75A
 585                 - ST Microelectronics STDS75
 586                 - TelCom (now Microchip) TCN75
 587                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 588                   TMP275
 589
 590           This driver supports driver model based binding through board
 591           specific I2C device tables.
 592
 593           It also supports the "legacy" style of driver binding.  To use
 594           that with some chips which don't replicate LM75 quirks exactly,
 595           you may need the "force" module parameter.
 596
 597           This driver can also be built as a module.  If so, the module
 598           will be called lm75.
 599
 600 config SENSORS_LM77
 601         tristate "National Semiconductor LM77"
 602         depends on I2C
 603         help
 604           If you say yes here you get support for National Semiconductor LM77
 605           sensor chips.
 606
 607           This driver can also be built as a module.  If so, the module
 608           will be called lm77.
 609
 610 config SENSORS_LM78
 611         tristate "National Semiconductor LM78 and compatibles"
 612         depends on I2C
 613         select HWMON_VID
 614         help
 615           If you say yes here you get support for National Semiconductor LM78,
 616           LM78-J and LM79.
 617
 618           This driver can also be built as a module.  If so, the module
 619           will be called lm78.
 620
 621 config SENSORS_LM80
 622         tristate "National Semiconductor LM80 and LM96080"
 623         depends on I2C
 624         help
 625           If you say yes here you get support for National Semiconductor
 626           LM80 and LM96080 sensor chips.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called lm80.
 630
 631 config SENSORS_LM83
 632         tristate "National Semiconductor LM83 and compatibles"
 633         depends on I2C
 634         help
 635           If you say yes here you get support for National Semiconductor
 636           LM82 and LM83 sensor chips.
 637
 638           This driver can also be built as a module.  If so, the module
 639           will be called lm83.
 640
 641 config SENSORS_LM85
 642         tristate "National Semiconductor LM85 and compatibles"
 643         depends on I2C
 644         select HWMON_VID
 645         help
 646           If you say yes here you get support for National Semiconductor LM85
 647           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 648           EMC6D101, EMC6D102, and EMC6D103.
 649
 650           This driver can also be built as a module.  If so, the module
 651           will be called lm85.
 652
 653 config SENSORS_LM87
 654         tristate "National Semiconductor LM87 and compatibles"
 655         depends on I2C
 656         select HWMON_VID
 657         help
 658           If you say yes here you get support for National Semiconductor LM87
 659           and Analog Devices ADM1024 sensor chips.
 660
 661           This driver can also be built as a module.  If so, the module
 662           will be called lm87.
 663
 664 config SENSORS_LM90
 665         tristate "National Semiconductor LM90 and compatibles"
 666         depends on I2C
 667         help
 668           If you say yes here you get support for National Semiconductor LM90,
 669           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 670           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 671           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 672           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 673           sensor chips.
 674
 675           This driver can also be built as a module.  If so, the module
 676           will be called lm90.
 677
 678 config SENSORS_LM92
 679         tristate "National Semiconductor LM92 and compatibles"
 680         depends on I2C
 681         help
 682           If you say yes here you get support for National Semiconductor LM92
 683           and Maxim MAX6635 sensor chips.
 684
 685           This driver can also be built as a module.  If so, the module
 686           will be called lm92.
 687
 688 config SENSORS_LM93
 689         tristate "National Semiconductor LM93 and compatibles"
 690         depends on I2C
 691         select HWMON_VID
 692         help
 693           If you say yes here you get support for National Semiconductor LM93,
 694           LM94, and compatible sensor chips.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called lm93.
 698
 699 config SENSORS_LTC4151
 700         tristate "Linear Technology LTC4151"
 701         depends on I2C
 702         default n
 703         help
 704           If you say yes here you get support for Linear Technology LTC4151
 705           High Voltage I2C Current and Voltage Monitor interface.
 706
 707           This driver can also be built as a module. If so, the module will
 708           be called ltc4151.
 709
 710 config SENSORS_LTC4215
 711         tristate "Linear Technology LTC4215"
 712         depends on I2C
 713         default n
 714         help
 715           If you say yes here you get support for Linear Technology LTC4215
 716           Hot Swap Controller I2C interface.
 717
 718           This driver can also be built as a module. If so, the module will
 719           be called ltc4215.
 720
 721 config SENSORS_LTC4245
 722         tristate "Linear Technology LTC4245"
 723         depends on I2C
 724         default n
 725         help
 726           If you say yes here you get support for Linear Technology LTC4245
 727           Multiple Supply Hot Swap Controller I2C interface.
 728
 729           This driver can also be built as a module. If so, the module will
 730           be called ltc4245.
 731
 732 config SENSORS_LTC4261
 733         tristate "Linear Technology LTC4261"
 734         depends on I2C
 735         default n
 736         help
 737           If you say yes here you get support for Linear Technology LTC4261
 738           Negative Voltage Hot Swap Controller I2C interface.
 739
 740           This driver can also be built as a module. If so, the module will
 741           be called ltc4261.
 742
 743 config SENSORS_LM95241
 744         tristate "National Semiconductor LM95241 and compatibles"
 745         depends on I2C
 746         help
 747           If you say yes here you get support for LM95231 and LM95241 sensor
 748           chips.
 749
 750           This driver can also be built as a module.  If so, the module
 751           will be called lm95241.
 752
 753 config SENSORS_LM95245
 754         tristate "National Semiconductor LM95245 sensor chip"
 755         depends on I2C
 756         help
 757           If you say yes here you get support for LM95245 sensor chip.
 758
 759           This driver can also be built as a module.  If so, the module
 760           will be called lm95245.
 761
 762 config SENSORS_MAX1111
 763         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 764         depends on SPI_MASTER
 765         help
 766           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 767           ADC chips.
 768
 769           This driver can also be built as a module.  If so, the module
 770           will be called max1111.
 771
 772 config SENSORS_MAX16065
 773         tristate "Maxim MAX16065 System Manager and compatibles"
 774         depends on I2C
 775         help
 776           If you say yes here you get support for hardware monitoring
 777           capabilities of the following Maxim System Manager chips.
 778             MAX16065
 779             MAX16066
 780             MAX16067
 781             MAX16068
 782             MAX16070
 783             MAX16071
 784
 785           This driver can also be built as a module.  If so, the module
 786           will be called max16065.
 787
 788 config SENSORS_MAX1619
 789         tristate "Maxim MAX1619 sensor chip"
 790         depends on I2C
 791         help
 792           If you say yes here you get support for MAX1619 sensor chip.
 793
 794           This driver can also be built as a module.  If so, the module
 795           will be called max1619.
 796
 797 config SENSORS_MAX1668
 798         tristate "Maxim MAX1668 and compatibles"
 799         depends on I2C
 800         help
 801           If you say yes here you get support for MAX1668, MAX1989 and
 802           MAX1805 chips.
 803
 804           This driver can also be built as a module.  If so, the module
 805           will be called max1668.
 806
 807 config SENSORS_MAX197
 808         tristate "Maxim MAX197 and compatibles"
 809         help
 810           Support for the Maxim MAX197 A/D converter.
 811           Support will include, but not be limited to, MAX197, and MAX199.
 812
 813           This driver can also be built as a module. If so, the module
 814           will be called max197.
 815
 816 config SENSORS_MAX6639
 817         tristate "Maxim MAX6639 sensor chip"
 818         depends on I2C
 819         help
 820           If you say yes here you get support for the MAX6639
 821           sensor chips.
 822
 823           This driver can also be built as a module.  If so, the module
 824           will be called max6639.
 825
 826 config SENSORS_MAX6642
 827         tristate "Maxim MAX6642 sensor chip"
 828         depends on I2C
 829         help
 830           If you say yes here you get support for MAX6642 sensor chip.
 831           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 832           with Overtemperature Alarm from Maxim.
 833
 834           This driver can also be built as a module.  If so, the module
 835           will be called max6642.
 836
 837 config SENSORS_MAX6650
 838         tristate "Maxim MAX6650 sensor chip"
 839         depends on I2C
 840         help
 841           If you say yes here you get support for the MAX6650 / MAX6651
 842           sensor chips.
 843
 844           This driver can also be built as a module.  If so, the module
 845           will be called max6650.
 846
 847 config SENSORS_MCP3021
 848         tristate "Microchip MCP3021 and compatibles"
 849         depends on I2C
 850         help
 851           If you say yes here you get support for MCP3021 and MCP3221.
 852           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 853           with 12-bit resolution.
 854
 855           This driver can also be built as a module.  If so, the module
 856           will be called mcp3021.
 857
 858 config SENSORS_NTC_THERMISTOR
 859         tristate "NTC thermistor support"
 860         help
 861           This driver supports NTC thermistors sensor reading and its
 862           interpretation. The driver can also monitor the temperature and
 863           send notifications about the temperature.
 864
 865           Currently, this driver supports
 866           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 867
 868           This driver can also be built as a module.  If so, the module
 869           will be called ntc-thermistor.
 870
 871 config SENSORS_PC87360
 872         tristate "National Semiconductor PC87360 family"
 873         depends on !PPC
 874         select HWMON_VID
 875         help
 876           If you say yes here you get access to the hardware monitoring
 877           functions of the National Semiconductor PC8736x Super-I/O chips.
 878           The PC87360, PC87363 and PC87364 only have fan monitoring and
 879           control.  The PC87365 and PC87366 additionally have voltage and
 880           temperature monitoring.
 881
 882           This driver can also be built as a module.  If so, the module
 883           will be called pc87360.
 884
 885 config SENSORS_PC87427
 886         tristate "National Semiconductor PC87427"
 887         depends on !PPC
 888         help
 889           If you say yes here you get access to the hardware monitoring
 890           functions of the National Semiconductor PC87427 Super-I/O chip.
 891           The chip has two distinct logical devices, one for fan speed
 892           monitoring and control, and one for voltage and temperature
 893           monitoring. Fan speed monitoring and control are supported, as
 894           well as temperature monitoring. Voltages aren't supported yet.
 895
 896           This driver can also be built as a module.  If so, the module
 897           will be called pc87427.
 898
 899 config SENSORS_PCF8591
 900         tristate "Philips PCF8591 ADC/DAC"
 901         depends on I2C
 902         default n
 903         help
 904           If you say yes here you get support for Philips PCF8591 4-channel
 905           ADC, 1-channel DAC chips.
 906
 907           This driver can also be built as a module.  If so, the module
 908           will be called pcf8591.
 909
 910           These devices are hard to detect and rarely found on mainstream
 911           hardware.  If unsure, say N.
 912
 913 source drivers/hwmon/pmbus/Kconfig
 914
 915 config SENSORS_SHT15
 916         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 917         depends on GPIOLIB
 918         help
 919           If you say yes here you get support for the Sensiron SHT10, SHT11,
 920           SHT15, SHT71, SHT75 humidity and temperature sensors.
 921
 922           This driver can also be built as a module.  If so, the module
 923           will be called sht15.
 924
 925 config SENSORS_SHT21
 926         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 927         depends on I2C
 928         help
 929           If you say yes here you get support for the Sensiron SHT21, SHT25
 930           humidity and temperature sensors.
 931
 932           This driver can also be built as a module.  If so, the module
 933           will be called sht21.
 934
 935 config SENSORS_S3C
 936         tristate "Samsung built-in ADC"
 937         depends on S3C_ADC
 938         help
 939           If you say yes here you get support for the on-board ADCs of
 940           the Samsung S3C24XX, S3C64XX and other series of SoC
 941
 942           This driver can also be built as a module. If so, the module
 943           will be called s3c-hwmon.
 944
 945 config SENSORS_S3C_RAW
 946         bool "Include raw channel attributes in sysfs"
 947         depends on SENSORS_S3C
 948         help
 949           Say Y here if you want to include raw copies of all the ADC
 950           channels in sysfs.
 951
 952 config SENSORS_SIS5595
 953         tristate "Silicon Integrated Systems Corp. SiS5595"
 954         depends on PCI
 955         help
 956           If you say yes here you get support for the integrated sensors in
 957           SiS5595 South Bridges.
 958
 959           This driver can also be built as a module.  If so, the module
 960           will be called sis5595.
 961
 962 config SENSORS_SMM665
 963         tristate "Summit Microelectronics SMM665"
 964         depends on I2C
 965         default n
 966         help
 967           If you say yes here you get support for the hardware monitoring
 968           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 969           Active DC Output Controller / Monitor.
 970
 971           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 972           Support for those chips is untested.
 973
 974           This driver can also be built as a module. If so, the module will
 975           be called smm665.
 976
 977 config SENSORS_DME1737
 978         tristate "SMSC DME1737, SCH311x and compatibles"
 979         depends on I2C && !PPC
 980         select HWMON_VID
 981         help
 982           If you say yes here you get support for the hardware monitoring
 983           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 984           Asus A8000 Super-I/O chips.
 985
 986           This driver can also be built as a module.  If so, the module
 987           will be called dme1737.
 988
 989 config SENSORS_EMC1403
 990         tristate "SMSC EMC1403/23 thermal sensor"
 991         depends on I2C
 992         help
 993           If you say yes here you get support for the SMSC EMC1403/23
 994           temperature monitoring chip.
 995
 996           Threshold values can be configured using sysfs.
 997           Data from the different diodes are accessible via sysfs.
 998
 999 config SENSORS_EMC2103
1000         tristate "SMSC EMC2103"
1001         depends on I2C
1002         help
1003           If you say yes here you get support for the temperature
1004           and fan sensors of the SMSC EMC2103 chips.
1005
1006           This driver can also be built as a module.  If so, the module
1007           will be called emc2103.
1008
1009 config SENSORS_EMC6W201
1010         tristate "SMSC EMC6W201"
1011         depends on I2C
1012         help
1013           If you say yes here you get support for the SMSC EMC6W201
1014           hardware monitoring chip.
1015
1016           This driver can also be built as a module.  If so, the module
1017           will be called emc6w201.
1018
1019 config SENSORS_SMSC47M1
1020         tristate "SMSC LPC47M10x and compatibles"
1021         depends on !PPC
1022         help
1023           If you say yes here you get support for the integrated fan
1024           monitoring and control capabilities of the SMSC LPC47B27x,
1025           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1026           LPC47M192, LPC47M292 and LPC47M997 chips.
1027
1028           The temperature and voltage sensor features of the LPC47M15x,
1029           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1030           driver, select also "SMSC LPC47M192 and compatibles" below for
1031           those.
1032
1033           This driver can also be built as a module.  If so, the module
1034           will be called smsc47m1.
1035
1036 config SENSORS_SMSC47M192
1037         tristate "SMSC LPC47M192 and compatibles"
1038         depends on I2C
1039         select HWMON_VID
1040         help
1041           If you say yes here you get support for the temperature and
1042           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1043           and LPC47M997 chips.
1044
1045           The fan monitoring and control capabilities of these chips
1046           are supported by another driver, select
1047           "SMSC LPC47M10x and compatibles" above. You need both drivers
1048           if you want fan control and voltage/temperature sensor support.
1049
1050           This driver can also be built as a module.  If so, the module
1051           will be called smsc47m192.
1052
1053 config SENSORS_SMSC47B397
1054         tristate "SMSC LPC47B397-NC"
1055         depends on !PPC
1056         help
1057           If you say yes here you get support for the SMSC LPC47B397-NC
1058           sensor chip.
1059
1060           This driver can also be built as a module.  If so, the module
1061           will be called smsc47b397.
1062
1063 config SENSORS_SCH56XX_COMMON
1064         tristate
1065         default n
1066
1067 config SENSORS_SCH5627
1068         tristate "SMSC SCH5627"
1069         depends on !PPC && WATCHDOG
1070         select SENSORS_SCH56XX_COMMON
1071         select WATCHDOG_CORE
1072         help
1073           If you say yes here you get support for the hardware monitoring
1074           features of the SMSC SCH5627 Super-I/O chip including support for
1075           the integrated watchdog.
1076
1077           This driver can also be built as a module.  If so, the module
1078           will be called sch5627.
1079
1080 config SENSORS_SCH5636
1081         tristate "SMSC SCH5636"
1082         depends on !PPC && WATCHDOG
1083         select SENSORS_SCH56XX_COMMON
1084         select WATCHDOG_CORE
1085         help
1086           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1087           hardware monitoring solutions, allowing motherboard manufacturers to
1088           create their own custom hwmon solution based upon the SCH5636.
1089
1090           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1091           hwmon solution. Say yes here if you want support for the Fujitsu
1092           Theseus' hardware monitoring features including support for the
1093           integrated watchdog.
1094
1095           This driver can also be built as a module.  If so, the module
1096           will be called sch5636.
1097
1098 config SENSORS_ADS1015
1099         tristate "Texas Instruments ADS1015"
1100         depends on I2C
1101         help
1102           If you say yes here you get support for Texas Instruments ADS1015
1103           12-bit 4-input ADC device.
1104
1105           This driver can also be built as a module.  If so, the module
1106           will be called ads1015.
1107
1108 config SENSORS_ADS7828
1109         tristate "Texas Instruments ADS7828"
1110         depends on I2C
1111         help
1112           If you say yes here you get support for Texas Instruments ADS7828
1113           12-bit 8-channel ADC device.
1114
1115           This driver can also be built as a module.  If so, the module
1116           will be called ads7828.
1117
1118 config SENSORS_ADS7871
1119         tristate "Texas Instruments ADS7871 A/D converter"
1120         depends on SPI
1121         help
1122           If you say yes here you get support for TI ADS7871 & ADS7870
1123
1124           This driver can also be built as a module.  If so, the module
1125           will be called ads7871.
1126
1127 config SENSORS_AMC6821
1128         tristate "Texas Instruments AMC6821"
1129         depends on I2C
1130         help
1131           If you say yes here you get support for the Texas Instruments
1132           AMC6821 hardware monitoring chips.
1133
1134           This driver can also be build as a module.  If so, the module
1135           will be called amc6821.
1136
1137 config SENSORS_INA2XX
1138         tristate "Texas Instruments INA219 and compatibles"
1139         depends on I2C
1140         help
1141           If you say yes here you get support for INA219, INA220, INA226, and
1142           INA230 power monitor chips.
1143
1144           The INA2xx driver is configured for the default configuration of
1145           the part as described in the datasheet.
1146           Default value for Rshunt is 10 mOhms.
1147           This driver can also be built as a module.  If so, the module
1148           will be called ina2xx.
1149
1150 config SENSORS_THMC50
1151         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1152         depends on I2C
1153         help
1154           If you say yes here you get support for Texas Instruments THMC50
1155           sensor chips and clones: the Analog Devices ADM1022.
1156
1157           This driver can also be built as a module.  If so, the module
1158           will be called thmc50.
1159
1160 config SENSORS_TMP102
1161         tristate "Texas Instruments TMP102"
1162         depends on I2C
1163         help
1164           If you say yes here you get support for Texas Instruments TMP102
1165           sensor chips.
1166
1167           This driver can also be built as a module.  If so, the module
1168           will be called tmp102.
1169
1170 config SENSORS_TMP401
1171         tristate "Texas Instruments TMP401 and compatibles"
1172         depends on I2C
1173         help
1174           If you say yes here you get support for Texas Instruments TMP401 and
1175           TMP411 temperature sensor chips.
1176
1177           This driver can also be built as a module.  If so, the module
1178           will be called tmp401.
1179
1180 config SENSORS_TMP421
1181         tristate "Texas Instruments TMP421 and compatible"
1182         depends on I2C
1183         help
1184           If you say yes here you get support for Texas Instruments TMP421,
1185           TMP422 and TMP423 temperature sensor chips.
1186
1187           This driver can also be built as a module.  If so, the module
1188           will be called tmp421.
1189
1190 config SENSORS_TWL4030_MADC
1191         tristate "Texas Instruments TWL4030 MADC Hwmon"
1192         depends on TWL4030_MADC
1193         help
1194         If you say yes here you get hwmon support for triton
1195         TWL4030-MADC.
1196
1197         This driver can also be built as a module. If so it will be called
1198         twl4030-madc-hwmon.
1199
1200 config SENSORS_VIA_CPUTEMP
1201         tristate "VIA CPU temperature sensor"
1202         depends on X86
1203         select HWMON_VID
1204         help
1205           If you say yes here you get support for the temperature
1206           sensor inside your CPU. Supported are all known variants of
1207           the VIA C7 and Nano.
1208
1209 config SENSORS_VIA686A
1210         tristate "VIA686A"
1211         depends on PCI
1212         help
1213           If you say yes here you get support for the integrated sensors in
1214           Via 686A/B South Bridges.
1215
1216           This driver can also be built as a module.  If so, the module
1217           will be called via686a.
1218
1219 config SENSORS_VT1211
1220         tristate "VIA VT1211"
1221         depends on !PPC
1222         select HWMON_VID
1223         help
1224           If you say yes here then you get support for hardware monitoring
1225           features of the VIA VT1211 Super-I/O chip.
1226
1227           This driver can also be built as a module.  If so, the module
1228           will be called vt1211.
1229
1230 config SENSORS_VT8231
1231         tristate "VIA VT8231"
1232         depends on PCI
1233         select HWMON_VID
1234         help
1235           If you say yes here then you get support for the integrated sensors
1236           in the VIA VT8231 device.
1237
1238           This driver can also be built as a module.  If so, the module
1239           will be called vt8231.
1240
1241 config SENSORS_W83781D
1242         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1243         depends on I2C
1244         select HWMON_VID
1245         help
1246           If you say yes here you get support for the Winbond W8378x series
1247           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1248           Asus AS99127F.
1249
1250           This driver can also be built as a module.  If so, the module
1251           will be called w83781d.
1252
1253 config SENSORS_W83791D
1254         tristate "Winbond W83791D"
1255         depends on I2C
1256         select HWMON_VID
1257         help
1258           If you say yes here you get support for the Winbond W83791D chip.
1259
1260           This driver can also be built as a module.  If so, the module
1261           will be called w83791d.
1262
1263 config SENSORS_W83792D
1264         tristate "Winbond W83792D"
1265         depends on I2C
1266         help
1267           If you say yes here you get support for the Winbond W83792D chip.
1268
1269           This driver can also be built as a module.  If so, the module
1270           will be called w83792d.
1271
1272 config SENSORS_W83793
1273         tristate "Winbond W83793"
1274         depends on I2C
1275         select HWMON_VID
1276         help
1277           If you say yes here you get support for the Winbond W83793
1278           hardware monitoring chip, including support for the integrated
1279           watchdog.
1280
1281           This driver can also be built as a module.  If so, the module
1282           will be called w83793.
1283
1284 config SENSORS_W83795
1285         tristate "Winbond/Nuvoton W83795G/ADG"
1286         depends on I2C
1287         help
1288           If you say yes here you get support for the Winbond W83795G and
1289           W83795ADG hardware monitoring chip, including manual fan speed
1290           control.
1291
1292           This driver can also be built as a module.  If so, the module
1293           will be called w83795.
1294
1295 config SENSORS_W83795_FANCTRL
1296         boolean "Include automatic fan control support (DANGEROUS)"
1297         depends on SENSORS_W83795
1298         default n
1299         help
1300           If you say yes here, support for automatic fan speed control
1301           will be included in the driver.
1302
1303           This part of the code wasn't carefully reviewed and tested yet,
1304           so enabling this option is strongly discouraged on production
1305           servers. Only developers and testers should enable it for the
1306           time being.
1307
1308           Please also note that this option will create sysfs attribute
1309           files which may change in the future, so you shouldn't rely
1310           on them being stable.
1311
1312 config SENSORS_W83L785TS
1313         tristate "Winbond W83L785TS-S"
1314         depends on I2C
1315         help
1316           If you say yes here you get support for the Winbond W83L785TS-S
1317           sensor chip, which is used on the Asus A7N8X, among other
1318           motherboards.
1319
1320           This driver can also be built as a module.  If so, the module
1321           will be called w83l785ts.
1322
1323 config SENSORS_W83L786NG
1324         tristate "Winbond W83L786NG, W83L786NR"
1325         depends on I2C
1326         help
1327           If you say yes here you get support for the Winbond W83L786NG
1328           and W83L786NR sensor chips.
1329
1330           This driver can also be built as a module.  If so, the module
1331           will be called w83l786ng.
1332
1333 config SENSORS_W83627HF
1334         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1335         depends on !PPC
1336         select HWMON_VID
1337         help
1338           If you say yes here you get support for the Winbond W836X7 series
1339           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1340           W83697HF.
1341
1342           This driver can also be built as a module.  If so, the module
1343           will be called w83627hf.
1344
1345 config SENSORS_W83627EHF
1346         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1347         depends on !PPC
1348         select HWMON_VID
1349         help
1350           If you say yes here you get support for the hardware
1351           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1352
1353           This driver also supports the W83627EHG, which is the lead-free
1354           version of the W83627EHF, and the W83627DHG, which is a similar
1355           chip suited for specific Intel processors that use PECI such as
1356           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1357           version of the W83627DHG (as far as hardware monitoring goes.)
1358
1359           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1360           (also known as W83667HG-I), and NCT6776F.
1361
1362           This driver can also be built as a module.  If so, the module
1363           will be called w83627ehf.
1364
1365 config SENSORS_WM831X
1366         tristate "WM831x PMICs"
1367         depends on MFD_WM831X
1368         help
1369           If you say yes here you get support for the hardware
1370           monitoring functionality of the Wolfson Microelectronics
1371           WM831x series of PMICs.
1372
1373           This driver can also be built as a module.  If so, the module
1374           will be called wm831x-hwmon.
1375
1376 config SENSORS_WM8350
1377         tristate "Wolfson Microelectronics WM835x"
1378         depends on MFD_WM8350
1379         help
1380           If you say yes here you get support for the hardware
1381           monitoring features of the WM835x series of PMICs.
1382
1383           This driver can also be built as a module.  If so, the module
1384           will be called wm8350-hwmon.
1385
1386 config SENSORS_ULTRA45
1387         tristate "Sun Ultra45 PIC16F747"
1388         depends on SPARC64
1389         help
1390           This driver provides support for the Ultra45 workstation environmental
1391           sensors.
1392
1393 config SENSORS_APPLESMC
1394         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1395         depends on INPUT && X86
1396         select NEW_LEDS
1397         select LEDS_CLASS
1398         select INPUT_POLLDEV
1399         default n
1400         help
1401           This driver provides support for the Apple System Management
1402           Controller, which provides an accelerometer (Apple Sudden Motion
1403           Sensor), light sensors, temperature sensors, keyboard backlight
1404           control and fan control.
1405
1406           Only Intel-based Apple's computers are supported (MacBook Pro,
1407           MacBook, MacMini).
1408
1409           Data from the different sensors, keyboard backlight control and fan
1410           control are accessible via sysfs.
1411
1412           This driver also provides an absolute input class device, allowing
1413           the laptop to act as a pinball machine-esque joystick.
1414
1415           Say Y here if you have an applicable laptop and want to experience
1416           the awesome power of applesmc.
1417
1418 config SENSORS_MC13783_ADC
1419         tristate "Freescale MC13783/MC13892 ADC"
1420         depends on MFD_MC13XXX
1421         help
1422           Support for the A/D converter on MC13783 and MC13892 PMIC.
1423
1424 if ACPI
1425
1426 comment "ACPI drivers"
1427
1428 config SENSORS_ACPI_POWER
1429         tristate "ACPI 4.0 power meter"
1430         help
1431           This driver exposes ACPI 4.0 power meters as hardware monitoring
1432           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1433           and a power meter.
1434
1435           To compile this driver as a module, choose M here:
1436           the module will be called acpi_power_meter.
1437
1438 config SENSORS_ATK0110
1439         tristate "ASUS ATK0110"
1440         depends on X86
1441         help
1442           If you say yes here you get support for the ACPI hardware
1443           monitoring interface found in many ASUS motherboards. This
1444           driver will provide readings of fans, voltages and temperatures
1445           through the system firmware.
1446
1447           This driver can also be built as a module. If so, the module
1448           will be called asus_atk0110.
1449
1450 endif # ACPI
1451
1452 endif # HWMON