2 # Hardware monitoring chip drivers configuration
6 tristate "Hardware Monitoring support"
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
22 This support can also be built as a module. If so, the module
31 config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
40 comment "Native drivers"
42 config SENSORS_ABITUGURU
43 tristate "Abit uGuru (rev 1 & 2)"
44 depends on X86 && DMI && EXPERIMENTAL
46 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
57 config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
59 depends on X86 && DMI && EXPERIMENTAL
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
72 tristate "Analog Devices AD7414"
73 depends on I2C && EXPERIMENTAL
75 If you say yes here you get support for the Analog Devices
76 AD7414 temperature monitoring chip.
78 This driver can also be built as a module. If so, the module
79 will be called ad7414.
82 tristate "Analog Devices AD7416, AD7417 and AD7418"
83 depends on I2C && EXPERIMENTAL
85 If you say yes here you get support for the Analog Devices
86 AD7416, AD7417 and AD7418 temperature monitoring chips.
88 This driver can also be built as a module. If so, the module
89 will be called ad7418.
92 tristate "National Semiconductor ADCxxxSxxx"
93 depends on SPI_MASTER && EXPERIMENTAL
95 If you say yes here you get support for the National Semiconductor
96 ADC<bb><c>S<sss> chip family, where
97 * bb is the resolution in number of bits (8, 10, 12)
98 * c is the number of channels (1, 2, 4, 8)
99 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
100 kSPS and 101 for 1 MSPS)
102 Examples : ADC081S101, ADC124S501, ...
104 This driver can also be built as a module. If so, the module
105 will be called adcxx.
107 config SENSORS_ADM1021
108 tristate "Analog Devices ADM1021 and compatibles"
111 If you say yes here you get support for Analog Devices ADM1021
112 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
113 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
115 This driver can also be built as a module. If so, the module
116 will be called adm1021.
118 config SENSORS_ADM1025
119 tristate "Analog Devices ADM1025 and compatibles"
123 If you say yes here you get support for Analog Devices ADM1025
124 and Philips NE1619 sensor chips.
126 This driver can also be built as a module. If so, the module
127 will be called adm1025.
129 config SENSORS_ADM1026
130 tristate "Analog Devices ADM1026 and compatibles"
134 If you say yes here you get support for Analog Devices ADM1026
137 This driver can also be built as a module. If so, the module
138 will be called adm1026.
140 config SENSORS_ADM1029
141 tristate "Analog Devices ADM1029"
144 If you say yes here you get support for Analog Devices ADM1029
146 Very rare chip, please let us know you use it.
148 This driver can also be built as a module. If so, the module
149 will be called adm1029.
151 config SENSORS_ADM1031
152 tristate "Analog Devices ADM1031 and compatibles"
155 If you say yes here you get support for Analog Devices ADM1031
156 and ADM1030 sensor chips.
158 This driver can also be built as a module. If so, the module
159 will be called adm1031.
161 config SENSORS_ADM9240
162 tristate "Analog Devices ADM9240 and compatibles"
166 If you say yes here you get support for Analog Devices ADM9240,
167 Dallas DS1780, National Semiconductor LM81 sensor chips.
169 This driver can also be built as a module. If so, the module
170 will be called adm9240.
172 config SENSORS_ADT7411
173 tristate "Analog Devices ADT7411"
174 depends on I2C && EXPERIMENTAL
176 If you say yes here you get support for the Analog Devices
177 ADT7411 voltage and temperature monitoring chip.
179 This driver can also be built as a module. If so, the module
180 will be called adt7411.
182 config SENSORS_ADT7462
183 tristate "Analog Devices ADT7462"
184 depends on I2C && EXPERIMENTAL
186 If you say yes here you get support for the Analog Devices
187 ADT7462 temperature monitoring chips.
189 This driver can also be built as a module. If so, the module
190 will be called adt7462.
192 config SENSORS_ADT7470
193 tristate "Analog Devices ADT7470"
194 depends on I2C && EXPERIMENTAL
196 If you say yes here you get support for the Analog Devices
197 ADT7470 temperature monitoring chips.
199 This driver can also be built as a module. If so, the module
200 will be called adt7470.
202 config SENSORS_ADT7475
203 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
207 If you say yes here you get support for the Analog Devices
208 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
211 This driver can also be build as a module. If so, the module
212 will be called adt7475.
214 config SENSORS_ASC7621
215 tristate "Andigilog aSC7621"
218 If you say yes here you get support for the aSC7621
219 family of SMBus sensors chip found on most Intel X38, X48, X58,
220 945, 965 and 975 desktop boards. Currently supported chips:
224 This driver can also be built as a module. If so, the module
225 will be called asc7621.
227 config SENSORS_K8TEMP
228 tristate "AMD Athlon64/FX or Opteron temperature sensor"
229 depends on X86 && PCI && EXPERIMENTAL
231 If you say yes here you get support for the temperature
232 sensor(s) inside your CPU. Supported is whole AMD K8
233 microarchitecture. Please note that you will need at least
234 lm-sensors 2.10.1 for proper userspace support.
236 This driver can also be built as a module. If so, the module
237 will be called k8temp.
239 config SENSORS_K10TEMP
240 tristate "AMD Family 10h+ temperature sensor"
241 depends on X86 && PCI
243 If you say yes here you get support for the temperature
244 sensor(s) inside your CPU. Supported are later revisions of
245 the AMD Family 10h and all revisions of the AMD Family 11h,
246 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
248 This driver can also be built as a module. If so, the module
249 will be called k10temp.
251 config SENSORS_FAM15H_POWER
252 tristate "AMD Family 15h processor power"
253 depends on X86 && PCI
255 If you say yes here you get support for processor power
256 information of your AMD family 15h CPU.
258 This driver can also be built as a module. If so, the module
259 will be called fam15h_power.
261 config SENSORS_ASB100
262 tristate "Asus ASB100 Bach"
263 depends on X86 && I2C && EXPERIMENTAL
266 If you say yes here you get support for the ASB100 Bach sensor
267 chip found on some Asus mainboards.
269 This driver can also be built as a module. If so, the module
270 will be called asb100.
273 tristate "Attansic ATXP1 VID controller"
274 depends on I2C && EXPERIMENTAL
277 If you say yes here you get support for the Attansic ATXP1 VID
280 If your board have such a chip, you are able to control your CPU
281 core and other voltages.
283 This driver can also be built as a module. If so, the module
284 will be called atxp1.
287 tristate "Dallas Semiconductor DS620"
290 If you say yes here you get support for Dallas Semiconductor
293 This driver can also be built as a module. If so, the module
294 will be called ds620.
296 config SENSORS_DS1621
297 tristate "Dallas Semiconductor DS1621 and DS1625"
300 If you say yes here you get support for Dallas Semiconductor
301 DS1621 and DS1625 sensor chips.
303 This driver can also be built as a module. If so, the module
304 will be called ds1621.
306 config SENSORS_EXYNOS4_TMU
307 tristate "Temperature sensor on Samsung EXYNOS4"
308 depends on EXYNOS4_DEV_TMU
310 If you say yes here you get support for TMU (Thermal Managment
311 Unit) on SAMSUNG EXYNOS4 series of SoC.
313 This driver can also be built as a module. If so, the module
314 will be called exynos4-tmu.
316 config SENSORS_I5K_AMB
317 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
318 depends on PCI && EXPERIMENTAL
320 If you say yes here you get support for FB-DIMM AMB temperature
321 monitoring chips on systems with the Intel 5000 series chipset.
323 This driver can also be built as a module. If so, the module
324 will be called i5k_amb.
326 config SENSORS_F71805F
327 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
329 If you say yes here you get support for hardware monitoring
330 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
333 This driver can also be built as a module. If so, the module
334 will be called f71805f.
336 config SENSORS_F71882FG
337 tristate "Fintek F71882FG and compatibles"
339 If you say yes here you get support for hardware monitoring
340 features of many Fintek Super-I/O (LPC) chips. The currently
354 This driver can also be built as a module. If so, the module
355 will be called f71882fg.
357 config SENSORS_F75375S
358 tristate "Fintek F75375S/SP and F75373"
361 If you say yes here you get support for hardware monitoring
362 features of the Fintek F75375S/SP and F75373
364 This driver can also be built as a module. If so, the module
365 will be called f75375s.
367 config SENSORS_FSCHMD
368 tristate "Fujitsu Siemens Computers sensor chips"
369 depends on X86 && I2C
371 If you say yes here you get support for the following Fujitsu
372 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
373 Heimdall, Heracles, Hades and Syleus including support for the
376 This is a merged driver for FSC sensor chips replacing the fscpos,
377 fscscy and fscher drivers and adding support for several other FSC
380 This driver can also be built as a module. If so, the module
381 will be called fschmd.
387 If you say yes here you get support for Global Mixed-mode
388 Technology Inc G760A fan speed PWM controller chips.
390 This driver can also be built as a module. If so, the module
391 will be called g760a.
393 config SENSORS_GL518SM
394 tristate "Genesys Logic GL518SM"
397 If you say yes here you get support for Genesys Logic GL518SM
400 This driver can also be built as a module. If so, the module
401 will be called gl518sm.
403 config SENSORS_GL520SM
404 tristate "Genesys Logic GL520SM"
408 If you say yes here you get support for Genesys Logic GL520SM
411 This driver can also be built as a module. If so, the module
412 will be called gl520sm.
414 config SENSORS_GPIO_FAN
416 depends on GENERIC_GPIO
418 If you say yes here you get support for fans connected to GPIO lines.
420 This driver can also be built as a module. If so, the module
421 will be called gpio-fan.
423 config SENSORS_CORETEMP
424 tristate "Intel Core/Core2/Atom temperature sensor"
425 depends on X86 && PCI && EXPERIMENTAL
427 If you say yes here you get support for the temperature
428 sensor inside your CPU. Most of the family 6 CPUs
429 are supported. Check Documentation/hwmon/coretemp for details.
431 config SENSORS_IBMAEM
432 tristate "IBM Active Energy Manager temperature/power sensors and control"
434 depends on IPMI_HANDLER
436 If you say yes here you get support for the temperature and
437 power sensors and capping hardware in various IBM System X
438 servers that support Active Energy Manager. This includes
439 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
440 and certain HC10/HS2x/LS2x/QS2x blades.
442 This driver can also be built as a module. If so, the module
443 will be called ibmaem.
445 config SENSORS_IBMPEX
446 tristate "IBM PowerExecutive temperature/power sensors"
448 depends on IPMI_HANDLER
450 If you say yes here you get support for the temperature and
451 power sensors in various IBM System X servers that support
452 PowerExecutive. So far this includes the x3350, x3550, x3650,
453 x3655, and x3755; the x3800, x3850, and x3950 models that have
454 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
456 This driver can also be built as a module. If so, the module
457 will be called ibmpex.
460 tristate "ITE IT87xx and compatibles"
463 If you say yes here you get support for ITE IT8705F, IT8712F,
464 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
465 chips, and the SiS960 clone.
467 This driver can also be built as a module. If so, the module
470 config SENSORS_JZ4740
471 tristate "Ingenic JZ4740 SoC ADC driver"
472 depends on MACH_JZ4740 && MFD_JZ4740_ADC
474 If you say yes here you get support for reading adc values from the ADCIN
475 pin on Ingenic JZ4740 SoC based boards.
477 This driver can also be build as a module. If so, the module will be
481 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
484 If you say yes here, you get support for JEDEC JC42.4 compliant
485 temperature sensors, which are used on many DDR3 memory modules for
486 mobile devices and servers. Support will include, but not be limited
487 to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
488 MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
490 This driver can also be built as a module. If so, the module
493 config SENSORS_LINEAGE
494 tristate "Lineage Compact Power Line Power Entry Module"
495 depends on I2C && EXPERIMENTAL
497 If you say yes here you get support for the Lineage Compact Power Line
498 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
499 CP2000DC, CP2725, and others.
501 This driver can also be built as a module. If so, the module
502 will be called lineage-pem.
505 tristate "National Semiconductor LM63 and LM64"
508 If you say yes here you get support for the National
509 Semiconductor LM63 and LM64 remote diode digital temperature
510 sensors with integrated fan control. Such chips are found
511 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
514 This driver can also be built as a module. If so, the module
518 tristate "National Semiconductor LM70 / Texas Instruments TMP121"
519 depends on SPI_MASTER
521 If you say yes here you get support for the National Semiconductor
522 LM70 and Texas Instruments TMP121/TMP123 digital temperature
525 This driver can also be built as a module. If so, the module
529 tristate "National Semiconductor LM73"
532 If you say yes here you get support for National Semiconductor LM73
534 This driver can also be built as a module. If so, the module
538 tristate "National Semiconductor LM75 and compatibles"
541 If you say yes here you get support for one common type of
542 temperature sensor chip, with models including:
544 - Dallas Semiconductor DS75 and DS1775
545 - Maxim MAX6625 and MAX6626
547 - National Semiconductor LM75, LM75A
549 - ST Microelectronics STDS75
550 - TelCom (now Microchip) TCN75
551 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
554 This driver supports driver model based binding through board
555 specific I2C device tables.
557 It also supports the "legacy" style of driver binding. To use
558 that with some chips which don't replicate LM75 quirks exactly,
559 you may need the "force" module parameter.
561 This driver can also be built as a module. If so, the module
565 tristate "National Semiconductor LM77"
568 If you say yes here you get support for National Semiconductor LM77
571 This driver can also be built as a module. If so, the module
575 tristate "National Semiconductor LM78 and compatibles"
579 If you say yes here you get support for National Semiconductor LM78,
582 This driver can also be built as a module. If so, the module
586 tristate "National Semiconductor LM80"
589 If you say yes here you get support for National Semiconductor
592 This driver can also be built as a module. If so, the module
596 tristate "National Semiconductor LM83 and compatibles"
599 If you say yes here you get support for National Semiconductor
600 LM82 and LM83 sensor chips.
602 This driver can also be built as a module. If so, the module
606 tristate "National Semiconductor LM85 and compatibles"
610 If you say yes here you get support for National Semiconductor LM85
611 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
612 EMC6D101, EMC6D102, and EMC6D103.
614 This driver can also be built as a module. If so, the module
618 tristate "National Semiconductor LM87 and compatibles"
622 If you say yes here you get support for National Semiconductor LM87
623 and Analog Devices ADM1024 sensor chips.
625 This driver can also be built as a module. If so, the module
629 tristate "National Semiconductor LM90 and compatibles"
632 If you say yes here you get support for National Semiconductor LM90,
633 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
634 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
635 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
636 Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
638 This driver can also be built as a module. If so, the module
642 tristate "National Semiconductor LM92 and compatibles"
645 If you say yes here you get support for National Semiconductor LM92
646 and Maxim MAX6635 sensor chips.
648 This driver can also be built as a module. If so, the module
652 tristate "National Semiconductor LM93 and compatibles"
656 If you say yes here you get support for National Semiconductor LM93,
657 LM94, and compatible sensor chips.
659 This driver can also be built as a module. If so, the module
662 config SENSORS_LTC4151
663 tristate "Linear Technology LTC4151"
667 If you say yes here you get support for Linear Technology LTC4151
668 High Voltage I2C Current and Voltage Monitor interface.
670 This driver can also be built as a module. If so, the module will
673 config SENSORS_LTC4215
674 tristate "Linear Technology LTC4215"
675 depends on I2C && EXPERIMENTAL
678 If you say yes here you get support for Linear Technology LTC4215
679 Hot Swap Controller I2C interface.
681 This driver can also be built as a module. If so, the module will
684 config SENSORS_LTC4245
685 tristate "Linear Technology LTC4245"
686 depends on I2C && EXPERIMENTAL
689 If you say yes here you get support for Linear Technology LTC4245
690 Multiple Supply Hot Swap Controller I2C interface.
692 This driver can also be built as a module. If so, the module will
695 config SENSORS_LTC4261
696 tristate "Linear Technology LTC4261"
697 depends on I2C && EXPERIMENTAL
700 If you say yes here you get support for Linear Technology LTC4261
701 Negative Voltage Hot Swap Controller I2C interface.
703 This driver can also be built as a module. If so, the module will
706 config SENSORS_LM95241
707 tristate "National Semiconductor LM95241 and compatibles"
710 If you say yes here you get support for LM95231 and LM95241 sensor
713 This driver can also be built as a module. If so, the module
714 will be called lm95241.
716 config SENSORS_LM95245
717 tristate "National Semiconductor LM95245 sensor chip"
718 depends on I2C && EXPERIMENTAL
720 If you say yes here you get support for LM95245 sensor chip.
722 This driver can also be built as a module. If so, the module
723 will be called lm95245.
725 config SENSORS_MAX1111
726 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
727 depends on SPI_MASTER
729 Say y here to support Maxim's MAX1111 ADC chips.
731 This driver can also be built as a module. If so, the module
732 will be called max1111.
734 config SENSORS_MAX16065
735 tristate "Maxim MAX16065 System Manager and compatibles"
738 If you say yes here you get support for hardware monitoring
739 capabilities of the following Maxim System Manager chips.
747 This driver can also be built as a module. If so, the module
748 will be called max16065.
750 config SENSORS_MAX1619
751 tristate "Maxim MAX1619 sensor chip"
754 If you say yes here you get support for MAX1619 sensor chip.
756 This driver can also be built as a module. If so, the module
757 will be called max1619.
759 config SENSORS_MAX1668
760 tristate "Maxim MAX1668 and compatibles"
761 depends on I2C && EXPERIMENTAL
763 If you say yes here you get support for MAX1668, MAX1989 and
766 This driver can also be built as a module. If so, the module
767 will be called max1668.
769 config SENSORS_MAX6639
770 tristate "Maxim MAX6639 sensor chip"
771 depends on I2C && EXPERIMENTAL
773 If you say yes here you get support for the MAX6639
776 This driver can also be built as a module. If so, the module
777 will be called max6639.
779 config SENSORS_MAX6642
780 tristate "Maxim MAX6642 sensor chip"
781 depends on I2C && EXPERIMENTAL
783 If you say yes here you get support for MAX6642 sensor chip.
784 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
785 with Overtemperature Alarm from Maxim.
787 This driver can also be built as a module. If so, the module
788 will be called max6642.
790 config SENSORS_MAX6650
791 tristate "Maxim MAX6650 sensor chip"
792 depends on I2C && EXPERIMENTAL
794 If you say yes here you get support for the MAX6650 / MAX6651
797 This driver can also be built as a module. If so, the module
798 will be called max6650.
800 config SENSORS_NTC_THERMISTOR
801 tristate "NTC thermistor support"
802 depends on EXPERIMENTAL
804 This driver supports NTC thermistors sensor reading and its
805 interpretation. The driver can also monitor the temperature and
806 send notifications about the temperature.
808 Currently, this driver supports
809 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
811 This driver can also be built as a module. If so, the module
812 will be called ntc-thermistor.
814 config SENSORS_PC87360
815 tristate "National Semiconductor PC87360 family"
818 If you say yes here you get access to the hardware monitoring
819 functions of the National Semiconductor PC8736x Super-I/O chips.
820 The PC87360, PC87363 and PC87364 only have fan monitoring and
821 control. The PC87365 and PC87366 additionally have voltage and
822 temperature monitoring.
824 This driver can also be built as a module. If so, the module
825 will be called pc87360.
827 config SENSORS_PC87427
828 tristate "National Semiconductor PC87427"
830 If you say yes here you get access to the hardware monitoring
831 functions of the National Semiconductor PC87427 Super-I/O chip.
832 The chip has two distinct logical devices, one for fan speed
833 monitoring and control, and one for voltage and temperature
834 monitoring. Fan speed monitoring and control are supported, as
835 well as temperature monitoring. Voltages aren't supported yet.
837 This driver can also be built as a module. If so, the module
838 will be called pc87427.
840 config SENSORS_PCF8591
841 tristate "Philips PCF8591 ADC/DAC"
845 If you say yes here you get support for Philips PCF8591 4-channel
846 ADC, 1-channel DAC chips.
848 This driver can also be built as a module. If so, the module
849 will be called pcf8591.
851 These devices are hard to detect and rarely found on mainstream
852 hardware. If unsure, say N.
854 source drivers/hwmon/pmbus/Kconfig
857 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
858 depends on GENERIC_GPIO
860 If you say yes here you get support for the Sensiron SHT10, SHT11,
861 SHT15, SHT71, SHT75 humidity and temperature sensors.
863 This driver can also be built as a module. If so, the module
864 will be called sht15.
867 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
870 If you say yes here you get support for the Sensiron SHT21, SHT25
871 humidity and temperature sensors.
873 This driver can also be built as a module. If so, the module
874 will be called sht21.
877 tristate "Samsung built-in ADC"
880 If you say yes here you get support for the on-board ADCs of
881 the Samsung S3C24XX, S3C64XX and other series of SoC
883 This driver can also be built as a module. If so, the module
884 will be called s3c-hwmon.
886 config SENSORS_S3C_RAW
887 bool "Include raw channel attributes in sysfs"
888 depends on SENSORS_S3C
890 Say Y here if you want to include raw copies of all the ADC
893 config SENSORS_SIS5595
894 tristate "Silicon Integrated Systems Corp. SiS5595"
897 If you say yes here you get support for the integrated sensors in
898 SiS5595 South Bridges.
900 This driver can also be built as a module. If so, the module
901 will be called sis5595.
903 config SENSORS_SMM665
904 tristate "Summit Microelectronics SMM665"
905 depends on I2C && EXPERIMENTAL
908 If you say yes here you get support for the hardware monitoring
909 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
910 Active DC Output Controller / Monitor.
912 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
913 Support for those chips is untested.
915 This driver can also be built as a module. If so, the module will
918 config SENSORS_DME1737
919 tristate "SMSC DME1737, SCH311x and compatibles"
920 depends on I2C && EXPERIMENTAL
923 If you say yes here you get support for the hardware monitoring
924 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
925 Asus A8000 Super-I/O chips.
927 This driver can also be built as a module. If so, the module
928 will be called dme1737.
930 config SENSORS_EMC1403
931 tristate "SMSC EMC1403/23 thermal sensor"
934 If you say yes here you get support for the SMSC EMC1403/23
935 temperature monitoring chip.
937 Threshold values can be configured using sysfs.
938 Data from the different diodes are accessible via sysfs.
940 config SENSORS_EMC2103
941 tristate "SMSC EMC2103"
944 If you say yes here you get support for the temperature
945 and fan sensors of the SMSC EMC2103 chips.
947 This driver can also be built as a module. If so, the module
948 will be called emc2103.
950 config SENSORS_EMC6W201
951 tristate "SMSC EMC6W201"
954 If you say yes here you get support for the SMSC EMC6W201
955 hardware monitoring chip.
957 This driver can also be built as a module. If so, the module
958 will be called emc6w201.
960 config SENSORS_SMSC47M1
961 tristate "SMSC LPC47M10x and compatibles"
963 If you say yes here you get support for the integrated fan
964 monitoring and control capabilities of the SMSC LPC47B27x,
965 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
966 LPC47M192, LPC47M292 and LPC47M997 chips.
968 The temperature and voltage sensor features of the LPC47M15x,
969 LPC47M192, LPC47M292 and LPC47M997 are supported by another
970 driver, select also "SMSC LPC47M192 and compatibles" below for
973 This driver can also be built as a module. If so, the module
974 will be called smsc47m1.
976 config SENSORS_SMSC47M192
977 tristate "SMSC LPC47M192 and compatibles"
981 If you say yes here you get support for the temperature and
982 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
985 The fan monitoring and control capabilities of these chips
986 are supported by another driver, select
987 "SMSC LPC47M10x and compatibles" above. You need both drivers
988 if you want fan control and voltage/temperature sensor support.
990 This driver can also be built as a module. If so, the module
991 will be called smsc47m192.
993 config SENSORS_SMSC47B397
994 tristate "SMSC LPC47B397-NC"
995 depends on EXPERIMENTAL
997 If you say yes here you get support for the SMSC LPC47B397-NC
1000 This driver can also be built as a module. If so, the module
1001 will be called smsc47b397.
1003 config SENSORS_SCH56XX_COMMON
1007 config SENSORS_SCH5627
1008 tristate "SMSC SCH5627"
1009 select SENSORS_SCH56XX_COMMON
1011 If you say yes here you get support for the hardware monitoring
1012 features of the SMSC SCH5627 Super-I/O chip.
1014 This driver can also be built as a module. If so, the module
1015 will be called sch5627.
1017 config SENSORS_SCH5636
1018 tristate "SMSC SCH5636"
1019 select SENSORS_SCH56XX_COMMON
1021 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1022 hardware monitoring solutions, allowing motherboard manufacturers to
1023 create their own custom hwmon solution based upon the SCH5636.
1025 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1026 hwmon solution. Say yes here if you want support for the Fujitsu
1027 Theseus' hardware monitoring features.
1029 This driver can also be built as a module. If so, the module
1030 will be called sch5636.
1032 config SENSORS_ADS1015
1033 tristate "Texas Instruments ADS1015"
1036 If you say yes here you get support for Texas Instruments ADS1015
1037 12-bit 4-input ADC device.
1039 This driver can also be built as a module. If so, the module
1040 will be called ads1015.
1042 config SENSORS_ADS7828
1043 tristate "Texas Instruments ADS7828"
1046 If you say yes here you get support for Texas Instruments ADS7828
1047 12-bit 8-channel ADC device.
1049 This driver can also be built as a module. If so, the module
1050 will be called ads7828.
1052 config SENSORS_ADS7871
1053 tristate "Texas Instruments ADS7871 A/D converter"
1056 If you say yes here you get support for TI ADS7871 & ADS7870
1058 This driver can also be built as a module. If so, the module
1059 will be called ads7871.
1061 config SENSORS_AMC6821
1062 tristate "Texas Instruments AMC6821"
1063 depends on I2C && EXPERIMENTAL
1065 If you say yes here you get support for the Texas Instruments
1066 AMC6821 hardware monitoring chips.
1068 This driver can also be build as a module. If so, the module
1069 will be called amc6821.
1071 config SENSORS_THMC50
1072 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1075 If you say yes here you get support for Texas Instruments THMC50
1076 sensor chips and clones: the Analog Devices ADM1022.
1078 This driver can also be built as a module. If so, the module
1079 will be called thmc50.
1081 config SENSORS_TMP102
1082 tristate "Texas Instruments TMP102"
1083 depends on I2C && EXPERIMENTAL
1085 If you say yes here you get support for Texas Instruments TMP102
1088 This driver can also be built as a module. If so, the module
1089 will be called tmp102.
1091 config SENSORS_TMP401
1092 tristate "Texas Instruments TMP401 and compatibles"
1093 depends on I2C && EXPERIMENTAL
1095 If you say yes here you get support for Texas Instruments TMP401 and
1096 TMP411 temperature sensor chips.
1098 This driver can also be built as a module. If so, the module
1099 will be called tmp401.
1101 config SENSORS_TMP421
1102 tristate "Texas Instruments TMP421 and compatible"
1103 depends on I2C && EXPERIMENTAL
1105 If you say yes here you get support for Texas Instruments TMP421,
1106 TMP422 and TMP423 temperature sensor chips.
1108 This driver can also be built as a module. If so, the module
1109 will be called tmp421.
1111 config SENSORS_TWL4030_MADC
1112 tristate "Texas Instruments TWL4030 MADC Hwmon"
1113 depends on TWL4030_MADC
1115 If you say yes here you get hwmon support for triton
1118 This driver can also be built as a module. If so it will be called
1121 config SENSORS_VIA_CPUTEMP
1122 tristate "VIA CPU temperature sensor"
1126 If you say yes here you get support for the temperature
1127 sensor inside your CPU. Supported are all known variants of
1128 the VIA C7 and Nano.
1130 config SENSORS_VIA686A
1134 If you say yes here you get support for the integrated sensors in
1135 Via 686A/B South Bridges.
1137 This driver can also be built as a module. If so, the module
1138 will be called via686a.
1140 config SENSORS_VT1211
1141 tristate "VIA VT1211"
1144 If you say yes here then you get support for hardware monitoring
1145 features of the VIA VT1211 Super-I/O chip.
1147 This driver can also be built as a module. If so, the module
1148 will be called vt1211.
1150 config SENSORS_VT8231
1151 tristate "VIA VT8231"
1155 If you say yes here then you get support for the integrated sensors
1156 in the VIA VT8231 device.
1158 This driver can also be built as a module. If so, the module
1159 will be called vt8231.
1161 config SENSORS_W83781D
1162 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1166 If you say yes here you get support for the Winbond W8378x series
1167 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1170 This driver can also be built as a module. If so, the module
1171 will be called w83781d.
1173 config SENSORS_W83791D
1174 tristate "Winbond W83791D"
1178 If you say yes here you get support for the Winbond W83791D chip.
1180 This driver can also be built as a module. If so, the module
1181 will be called w83791d.
1183 config SENSORS_W83792D
1184 tristate "Winbond W83792D"
1187 If you say yes here you get support for the Winbond W83792D chip.
1189 This driver can also be built as a module. If so, the module
1190 will be called w83792d.
1192 config SENSORS_W83793
1193 tristate "Winbond W83793"
1194 depends on I2C && EXPERIMENTAL
1197 If you say yes here you get support for the Winbond W83793
1198 hardware monitoring chip, including support for the integrated
1201 This driver can also be built as a module. If so, the module
1202 will be called w83793.
1204 config SENSORS_W83795
1205 tristate "Winbond/Nuvoton W83795G/ADG"
1206 depends on I2C && EXPERIMENTAL
1208 If you say yes here you get support for the Winbond W83795G and
1209 W83795ADG hardware monitoring chip.
1211 This driver can also be built as a module. If so, the module
1212 will be called w83795.
1214 config SENSORS_W83795_FANCTRL
1215 boolean "Include fan control support (DANGEROUS)"
1216 depends on SENSORS_W83795 && EXPERIMENTAL
1219 If you say yes here, support for the both manual and automatic
1220 fan control features will be included in the driver.
1222 This part of the code wasn't carefully reviewed and tested yet,
1223 so enabling this option is strongly discouraged on production
1224 servers. Only developers and testers should enable it for the
1227 Please also note that this option will create sysfs attribute
1228 files which may change in the future, so you shouldn't rely
1229 on them being stable.
1231 config SENSORS_W83L785TS
1232 tristate "Winbond W83L785TS-S"
1233 depends on I2C && EXPERIMENTAL
1235 If you say yes here you get support for the Winbond W83L785TS-S
1236 sensor chip, which is used on the Asus A7N8X, among other
1239 This driver can also be built as a module. If so, the module
1240 will be called w83l785ts.
1242 config SENSORS_W83L786NG
1243 tristate "Winbond W83L786NG, W83L786NR"
1244 depends on I2C && EXPERIMENTAL
1246 If you say yes here you get support for the Winbond W83L786NG
1247 and W83L786NR sensor chips.
1249 This driver can also be built as a module. If so, the module
1250 will be called w83l786ng.
1252 config SENSORS_W83627HF
1253 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1256 If you say yes here you get support for the Winbond W836X7 series
1257 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1260 This driver can also be built as a module. If so, the module
1261 will be called w83627hf.
1263 config SENSORS_W83627EHF
1264 tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1267 If you say yes here you get support for the hardware
1268 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1270 This driver also supports the W83627EHG, which is the lead-free
1271 version of the W83627EHF, and the W83627DHG, which is a similar
1272 chip suited for specific Intel processors that use PECI such as
1275 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1276 (also known as W83667HG-I), and NCT6776F.
1278 This driver can also be built as a module. If so, the module
1279 will be called w83627ehf.
1281 config SENSORS_WM831X
1282 tristate "WM831x PMICs"
1283 depends on MFD_WM831X
1285 If you say yes here you get support for the hardware
1286 monitoring functionality of the Wolfson Microelectronics
1287 WM831x series of PMICs.
1289 This driver can also be built as a module. If so, the module
1290 will be called wm831x-hwmon.
1292 config SENSORS_WM8350
1293 tristate "Wolfson Microelectronics WM835x"
1294 depends on MFD_WM8350
1296 If you say yes here you get support for the hardware
1297 monitoring features of the WM835x series of PMICs.
1299 This driver can also be built as a module. If so, the module
1300 will be called wm8350-hwmon.
1302 config SENSORS_ULTRA45
1303 tristate "Sun Ultra45 PIC16F747"
1306 This driver provides support for the Ultra45 workstation environmental
1309 config SENSORS_APPLESMC
1310 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1311 depends on INPUT && X86
1314 select INPUT_POLLDEV
1317 This driver provides support for the Apple System Management
1318 Controller, which provides an accelerometer (Apple Sudden Motion
1319 Sensor), light sensors, temperature sensors, keyboard backlight
1320 control and fan control.
1322 Only Intel-based Apple's computers are supported (MacBook Pro,
1325 Data from the different sensors, keyboard backlight control and fan
1326 control are accessible via sysfs.
1328 This driver also provides an absolute input class device, allowing
1329 the laptop to act as a pinball machine-esque joystick.
1331 Say Y here if you have an applicable laptop and want to experience
1332 the awesome power of applesmc.
1334 config SENSORS_MC13783_ADC
1335 tristate "Freescale MC13783 ADC"
1336 depends on MFD_MC13783
1338 Support for the A/D converter on MC13783 PMIC.
1342 comment "ACPI drivers"
1344 config SENSORS_ACPI_POWER
1345 tristate "ACPI 4.0 power meter"
1347 This driver exposes ACPI 4.0 power meters as hardware monitoring
1348 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1351 To compile this driver as a module, choose M here:
1352 the module will be called acpi_power_meter.
1354 config SENSORS_ATK0110
1355 tristate "ASUS ATK0110"
1356 depends on X86 && EXPERIMENTAL
1358 If you say yes here you get support for the ACPI hardware
1359 monitoring interface found in many ASUS motherboards. This
1360 driver will provide readings of fans, voltages and temperatures
1361 through the system firmware.
1363 This driver can also be built as a module. If so, the module
1364 will be called asus_atk0110.