drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
 114           and the XEON processor built-in sensor.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called adm1021.
 118
 119 config SENSORS_ADM1025
 120         tristate "Analog Devices ADM1025 and compatibles"
 121         depends on I2C
 122         select HWMON_VID
 123         help
 124           If you say yes here you get support for Analog Devices ADM1025
 125           and Philips NE1619 sensor chips.
 126
 127           This driver can also be built as a module.  If so, the module
 128           will be called adm1025.
 129
 130 config SENSORS_ADM1026
 131         tristate "Analog Devices ADM1026 and compatibles"
 132         depends on I2C && EXPERIMENTAL
 133         select HWMON_VID
 134         help
 135           If you say yes here you get support for Analog Devices ADM1026
 136           sensor chip.
 137
 138           This driver can also be built as a module.  If so, the module
 139           will be called adm1026.
 140
 141 config SENSORS_ADM1029
 142         tristate "Analog Devices ADM1029"
 143         depends on I2C && EXPERIMENTAL
 144         help
 145           If you say yes here you get support for Analog Devices ADM1029
 146           sensor chip.
 147           Very rare chip, please let us know you use it.
 148
 149           This driver can also be built as a module.  If so, the module
 150           will be called adm1029.
 151
 152 config SENSORS_ADM1031
 153         tristate "Analog Devices ADM1031 and compatibles"
 154         depends on I2C && EXPERIMENTAL
 155         help
 156           If you say yes here you get support for Analog Devices ADM1031
 157           and ADM1030 sensor chips.
 158
 159           This driver can also be built as a module.  If so, the module
 160           will be called adm1031.
 161
 162 config SENSORS_ADM9240
 163         tristate "Analog Devices ADM9240 and compatibles"
 164         depends on I2C
 165         select HWMON_VID
 166         help
 167           If you say yes here you get support for Analog Devices ADM9240,
 168           Dallas DS1780, National Semiconductor LM81 sensor chips.
 169
 170           This driver can also be built as a module.  If so, the module
 171           will be called adm9240.
 172
 173 config SENSORS_ADT7411
 174         tristate "Analog Devices ADT7411"
 175         depends on I2C && EXPERIMENTAL
 176         help
 177           If you say yes here you get support for the Analog Devices
 178           ADT7411 voltage and temperature monitoring chip.
 179
 180           This driver can also be built as a module. If so, the module
 181           will be called adt7411.
 182
 183 config SENSORS_ADT7462
 184         tristate "Analog Devices ADT7462"
 185         depends on I2C && EXPERIMENTAL
 186         help
 187           If you say yes here you get support for the Analog Devices
 188           ADT7462 temperature monitoring chips.
 189
 190           This driver can also be built as a module. If so, the module
 191           will be called adt7462.
 192
 193 config SENSORS_ADT7470
 194         tristate "Analog Devices ADT7470"
 195         depends on I2C && EXPERIMENTAL
 196         help
 197           If you say yes here you get support for the Analog Devices
 198           ADT7470 temperature monitoring chips.
 199
 200           This driver can also be built as a module. If so, the module
 201           will be called adt7470.
 202
 203 config SENSORS_ADT7475
 204         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 205         depends on I2C && EXPERIMENTAL
 206         select HWMON_VID
 207         help
 208           If you say yes here you get support for the Analog Devices
 209           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 210           chips.
 211
 212           This driver can also be build as a module.  If so, the module
 213           will be called adt7475.
 214
 215 config SENSORS_ASC7621
 216         tristate "Andigilog aSC7621"
 217         depends on HWMON && I2C
 218         help
 219           If you say yes here you get support for the aSC7621
 220           family of SMBus sensors chip found on most Intel X38, X48, X58,
 221           945, 965 and 975 desktop boards.  Currently supported chips:
 222           aSC7621
 223           aSC7621a
 224
 225           This driver can also be built as a module.  If so, the module
 226           will be called asc7621.
 227
 228 config SENSORS_K8TEMP
 229         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 230         depends on X86 && PCI && EXPERIMENTAL
 231         help
 232           If you say yes here you get support for the temperature
 233           sensor(s) inside your CPU. Supported is whole AMD K8
 234           microarchitecture. Please note that you will need at least
 235           lm-sensors 2.10.1 for proper userspace support.
 236
 237           This driver can also be built as a module.  If so, the module
 238           will be called k8temp.
 239
 240 config SENSORS_K10TEMP
 241         tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
 242         depends on X86 && PCI
 243         help
 244           If you say yes here you get support for the temperature
 245           sensor(s) inside your CPU. Supported are later revisions of
 246           the AMD Family 10h and all revisions of the AMD Family 11h
 247           microarchitectures.
 248
 249           This driver can also be built as a module.  If so, the module
 250           will be called k10temp.
 251
 252 config SENSORS_AMS
 253         tristate "Apple Motion Sensor driver"
 254         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
 255         select INPUT_POLLDEV
 256         help
 257           Support for the motion sensor included in PowerBooks. Includes
 258           implementations for PMU and I2C.
 259
 260           This driver can also be built as a module. If so, the module
 261           will be called ams.
 262
 263 config SENSORS_AMS_PMU
 264         bool "PMU variant"
 265         depends on SENSORS_AMS && ADB_PMU
 266         default y
 267         help
 268           PMU variant of motion sensor, found in late 2005 PowerBooks.
 269
 270 config SENSORS_AMS_I2C
 271         bool "I2C variant"
 272         depends on SENSORS_AMS && I2C
 273         default y
 274         help
 275           I2C variant of motion sensor, found in early 2005 PowerBooks and
 276           iBooks.
 277
 278 config SENSORS_ASB100
 279         tristate "Asus ASB100 Bach"
 280         depends on X86 && I2C && EXPERIMENTAL
 281         select HWMON_VID
 282         help
 283           If you say yes here you get support for the ASB100 Bach sensor
 284           chip found on some Asus mainboards.
 285
 286           This driver can also be built as a module.  If so, the module
 287           will be called asb100.
 288
 289 config SENSORS_ATXP1
 290         tristate "Attansic ATXP1 VID controller"
 291         depends on I2C && EXPERIMENTAL
 292         select HWMON_VID
 293         help
 294           If you say yes here you get support for the Attansic ATXP1 VID
 295           controller.
 296
 297           If your board have such a chip, you are able to control your CPU
 298           core and other voltages.
 299
 300           This driver can also be built as a module.  If so, the module
 301           will be called atxp1.
 302
 303 config SENSORS_DS1621
 304         tristate "Dallas Semiconductor DS1621 and DS1625"
 305         depends on I2C
 306         help
 307           If you say yes here you get support for Dallas Semiconductor
 308           DS1621 and DS1625 sensor chips.
 309
 310           This driver can also be built as a module.  If so, the module
 311           will be called ds1621.
 312
 313 config SENSORS_I5K_AMB
 314         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 315         depends on PCI && EXPERIMENTAL
 316         help
 317           If you say yes here you get support for FB-DIMM AMB temperature
 318           monitoring chips on systems with the Intel 5000 series chipset.
 319
 320           This driver can also be built as a module. If so, the module
 321           will be called i5k_amb.
 322
 323 config SENSORS_F71805F
 324         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 325         depends on EXPERIMENTAL
 326         help
 327           If you say yes here you get support for hardware monitoring
 328           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 329           Super-I/O chips.
 330
 331           This driver can also be built as a module.  If so, the module
 332           will be called f71805f.
 333
 334 config SENSORS_F71882FG
 335         tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
 336         depends on EXPERIMENTAL
 337         help
 338           If you say yes here you get support for hardware monitoring
 339           features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
 340           F71889FG and F8000 Super-I/O chips.
 341
 342           This driver can also be built as a module.  If so, the module
 343           will be called f71882fg.
 344
 345 config SENSORS_F75375S
 346         tristate "Fintek F75375S/SP and F75373";
 347         depends on I2C && EXPERIMENTAL
 348         help
 349           If you say yes here you get support for hardware monitoring
 350           features of the Fintek F75375S/SP and F75373
 351
 352           This driver can also be built as a module.  If so, the module
 353           will be called f75375s.
 354
 355 config SENSORS_FSCHMD
 356         tristate "Fujitsu Siemens Computers sensor chips"
 357         depends on X86 && I2C
 358         help
 359           If you say yes here you get support for the following Fujitsu
 360           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 361           Heimdall, Heracles, Hades and Syleus including support for the
 362           integrated watchdog.
 363
 364           This is a merged driver for FSC sensor chips replacing the fscpos,
 365           fscscy and fscher drivers and adding support for several other FSC
 366           sensor chips.
 367
 368           This driver can also be built as a module.  If so, the module
 369           will be called fschmd.
 370
 371 config SENSORS_G760A
 372         tristate "GMT G760A"
 373         depends on I2C
 374         help
 375           If you say yes here you get support for Global Mixed-mode
 376           Technology Inc G760A fan speed PWM controller chips.
 377
 378           This driver can also be built as a module.  If so, the module
 379           will be called g760a.
 380
 381 config SENSORS_GL518SM
 382         tristate "Genesys Logic GL518SM"
 383         depends on I2C
 384         help
 385           If you say yes here you get support for Genesys Logic GL518SM
 386           sensor chips.
 387
 388           This driver can also be built as a module.  If so, the module
 389           will be called gl518sm.
 390
 391 config SENSORS_GL520SM
 392         tristate "Genesys Logic GL520SM"
 393         depends on I2C
 394         select HWMON_VID
 395         help
 396           If you say yes here you get support for Genesys Logic GL520SM
 397           sensor chips.
 398
 399           This driver can also be built as a module.  If so, the module
 400           will be called gl520sm.
 401
 402 config SENSORS_CORETEMP
 403         tristate "Intel Core/Core2/Atom temperature sensor"
 404         depends on X86 && PCI && EXPERIMENTAL
 405         help
 406           If you say yes here you get support for the temperature
 407           sensor inside your CPU. Most of the family 6 CPUs
 408           are supported. Check documentation/driver for details.
 409
 410 config SENSORS_PKGTEMP
 411         tristate "Intel processor package temperature sensor"
 412         depends on X86 && PCI && EXPERIMENTAL
 413         help
 414           If you say yes here you get support for the package level temperature
 415           sensor inside your CPU. Check documentation/driver for details.
 416
 417 config SENSORS_IBMAEM
 418         tristate "IBM Active Energy Manager temperature/power sensors and control"
 419         select IPMI_SI
 420         depends on IPMI_HANDLER
 421         help
 422           If you say yes here you get support for the temperature and
 423           power sensors and capping hardware in various IBM System X
 424           servers that support Active Energy Manager.  This includes
 425           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 426           and certain HC10/HS2x/LS2x/QS2x blades.
 427
 428           This driver can also be built as a module.  If so, the module
 429           will be called ibmaem.
 430
 431 config SENSORS_IBMPEX
 432         tristate "IBM PowerExecutive temperature/power sensors"
 433         select IPMI_SI
 434         depends on IPMI_HANDLER
 435         help
 436           If you say yes here you get support for the temperature and
 437           power sensors in various IBM System X servers that support
 438           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 439           x3655, and x3755; the x3800, x3850, and x3950 models that have
 440           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 441
 442           This driver can also be built as a module.  If so, the module
 443           will be called ibmpex.
 444
 445 config SENSORS_IT87
 446         tristate "ITE IT87xx and compatibles"
 447         select HWMON_VID
 448         help
 449           If you say yes here you get support for ITE IT8705F, IT8712F,
 450           IT8716F, IT8718F, IT8720F and IT8726F sensor chips, and the
 451           SiS960 clone.
 452
 453           This driver can also be built as a module.  If so, the module
 454           will be called it87.
 455
 456 config SENSORS_JZ4740
 457         tristate "Ingenic JZ4740 SoC ADC driver"
 458         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 459         help
 460           If you say yes here you get support for reading adc values from the ADCIN
 461           pin on Ingenic JZ4740 SoC based boards.
 462
 463           This driver can also be build as a module. If so, the module will be
 464           called jz4740-hwmon.
 465
 466 config SENSORS_LM63
 467         tristate "National Semiconductor LM63 and LM64"
 468         depends on I2C
 469         help
 470           If you say yes here you get support for the National
 471           Semiconductor LM63 and LM64 remote diode digital temperature
 472           sensors with integrated fan control.  Such chips are found
 473           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 474           others.
 475
 476           This driver can also be built as a module.  If so, the module
 477           will be called lm63.
 478
 479 config SENSORS_LM70
 480         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 481         depends on SPI_MASTER && EXPERIMENTAL
 482         help
 483           If you say yes here you get support for the National Semiconductor
 484           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 485           sensor chips.
 486
 487           This driver can also be built as a module.  If so, the module
 488           will be called lm70.
 489
 490 config SENSORS_LM73
 491         tristate "National Semiconductor LM73"
 492         depends on I2C
 493         help
 494           If you say yes here you get support for National Semiconductor LM73
 495           sensor chips.
 496           This driver can also be built as a module.  If so, the module
 497           will be called lm73.
 498
 499 config SENSORS_LM75
 500         tristate "National Semiconductor LM75 and compatibles"
 501         depends on I2C
 502         help
 503           If you say yes here you get support for one common type of
 504           temperature sensor chip, with models including:
 505
 506                 - Dallas Semiconductor DS75 and DS1775
 507                 - Maxim MAX6625 and MAX6626
 508                 - Microchip MCP980x
 509                 - National Semiconductor LM75
 510                 - NXP's LM75A
 511                 - ST Microelectronics STDS75
 512                 - TelCom (now Microchip) TCN75
 513                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 514                   TMP275
 515
 516           This driver supports driver model based binding through board
 517           specific I2C device tables.
 518
 519           It also supports the "legacy" style of driver binding.  To use
 520           that with some chips which don't replicate LM75 quirks exactly,
 521           you may need the "force" module parameter.
 522
 523           This driver can also be built as a module.  If so, the module
 524           will be called lm75.
 525
 526 config SENSORS_LM77
 527         tristate "National Semiconductor LM77"
 528         depends on I2C
 529         help
 530           If you say yes here you get support for National Semiconductor LM77
 531           sensor chips.
 532
 533           This driver can also be built as a module.  If so, the module
 534           will be called lm77.
 535
 536 config SENSORS_LM78
 537         tristate "National Semiconductor LM78 and compatibles"
 538         depends on I2C
 539         select HWMON_VID
 540         help
 541           If you say yes here you get support for National Semiconductor LM78,
 542           LM78-J and LM79.
 543
 544           This driver can also be built as a module.  If so, the module
 545           will be called lm78.
 546
 547 config SENSORS_LM80
 548         tristate "National Semiconductor LM80"
 549         depends on I2C && EXPERIMENTAL
 550         help
 551           If you say yes here you get support for National Semiconductor
 552           LM80 sensor chips.
 553
 554           This driver can also be built as a module.  If so, the module
 555           will be called lm80.
 556
 557 config SENSORS_LM83
 558         tristate "National Semiconductor LM83 and compatibles"
 559         depends on I2C
 560         help
 561           If you say yes here you get support for National Semiconductor
 562           LM82 and LM83 sensor chips.
 563
 564           This driver can also be built as a module.  If so, the module
 565           will be called lm83.
 566
 567 config SENSORS_LM85
 568         tristate "National Semiconductor LM85 and compatibles"
 569         depends on I2C && EXPERIMENTAL
 570         select HWMON_VID
 571         help
 572           If you say yes here you get support for National Semiconductor LM85
 573           sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
 574
 575           This driver can also be built as a module.  If so, the module
 576           will be called lm85.
 577
 578 config SENSORS_LM87
 579         tristate "National Semiconductor LM87 and compatibles"
 580         depends on I2C
 581         select HWMON_VID
 582         help
 583           If you say yes here you get support for National Semiconductor LM87
 584           and Analog Devices ADM1024 sensor chips.
 585
 586           This driver can also be built as a module.  If so, the module
 587           will be called lm87.
 588
 589 config SENSORS_LM90
 590         tristate "National Semiconductor LM90 and compatibles"
 591         depends on I2C
 592         help
 593           If you say yes here you get support for National Semiconductor LM90,
 594           LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
 595           MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 596           MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG
 597           sensor chips.
 598
 599           This driver can also be built as a module.  If so, the module
 600           will be called lm90.
 601
 602 config SENSORS_LM92
 603         tristate "National Semiconductor LM92 and compatibles"
 604         depends on I2C
 605         help
 606           If you say yes here you get support for National Semiconductor LM92
 607           and Maxim MAX6635 sensor chips.
 608
 609           This driver can also be built as a module.  If so, the module
 610           will be called lm92.
 611
 612 config SENSORS_LM93
 613         tristate "National Semiconductor LM93 and compatibles"
 614         depends on I2C
 615         select HWMON_VID
 616         help
 617           If you say yes here you get support for National Semiconductor LM93
 618           sensor chips.
 619
 620           This driver can also be built as a module.  If so, the module
 621           will be called lm93.
 622
 623 config SENSORS_LTC4215
 624         tristate "Linear Technology LTC4215"
 625         depends on I2C && EXPERIMENTAL
 626         default n
 627         help
 628           If you say yes here you get support for Linear Technology LTC4215
 629           Hot Swap Controller I2C interface.
 630
 631           This driver can also be built as a module. If so, the module will
 632           be called ltc4215.
 633
 634 config SENSORS_LTC4245
 635         tristate "Linear Technology LTC4245"
 636         depends on I2C && EXPERIMENTAL
 637         default n
 638         help
 639           If you say yes here you get support for Linear Technology LTC4245
 640           Multiple Supply Hot Swap Controller I2C interface.
 641
 642           This driver can also be built as a module. If so, the module will
 643           be called ltc4245.
 644
 645 config SENSORS_LM95241
 646         tristate "National Semiconductor LM95241 sensor chip"
 647         depends on I2C
 648         help
 649           If you say yes here you get support for LM95241 sensor chip.
 650
 651           This driver can also be built as a module.  If so, the module
 652           will be called lm95241.
 653
 654 config SENSORS_MAX1111
 655         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 656         depends on SPI_MASTER
 657         help
 658           Say y here to support Maxim's MAX1111 ADC chips.
 659
 660           This driver can also be built as a module.  If so, the module
 661           will be called max1111.
 662
 663 config SENSORS_MAX1619
 664         tristate "Maxim MAX1619 sensor chip"
 665         depends on I2C
 666         help
 667           If you say yes here you get support for MAX1619 sensor chip.
 668
 669           This driver can also be built as a module.  If so, the module
 670           will be called max1619.
 671
 672 config SENSORS_MAX6650
 673         tristate "Maxim MAX6650 sensor chip"
 674         depends on I2C && EXPERIMENTAL
 675         help
 676           If you say yes here you get support for the MAX6650 / MAX6651
 677           sensor chips.
 678
 679           This driver can also be built as a module.  If so, the module
 680           will be called max6650.
 681
 682 config SENSORS_PC87360
 683         tristate "National Semiconductor PC87360 family"
 684         select HWMON_VID
 685         help
 686           If you say yes here you get access to the hardware monitoring
 687           functions of the National Semiconductor PC8736x Super-I/O chips.
 688           The PC87360, PC87363 and PC87364 only have fan monitoring and
 689           control.  The PC87365 and PC87366 additionally have voltage and
 690           temperature monitoring.
 691
 692           This driver can also be built as a module.  If so, the module
 693           will be called pc87360.
 694
 695 config SENSORS_PC87427
 696         tristate "National Semiconductor PC87427"
 697         depends on EXPERIMENTAL
 698         help
 699           If you say yes here you get access to the hardware monitoring
 700           functions of the National Semiconductor PC87427 Super-I/O chip.
 701           The chip has two distinct logical devices, one for fan speed
 702           monitoring and control, and one for voltage and temperature
 703           monitoring. Only fan speed monitoring is supported right now.
 704
 705           This driver can also be built as a module.  If so, the module
 706           will be called pc87427.
 707
 708 config SENSORS_PCF8591
 709         tristate "Philips PCF8591 ADC/DAC"
 710         depends on I2C
 711         default n
 712         help
 713           If you say yes here you get support for Philips PCF8591 4-channel
 714           ADC, 1-channel DAC chips.
 715
 716           This driver can also be built as a module.  If so, the module
 717           will be called pcf8591.
 718
 719           These devices are hard to detect and rarely found on mainstream
 720           hardware.  If unsure, say N.
 721
 722 config SENSORS_SHT15
 723         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 724         depends on GENERIC_GPIO
 725         help
 726           If you say yes here you get support for the Sensiron SHT10, SHT11,
 727           SHT15, SHT71, SHT75 humidity and temperature sensors.
 728
 729           This driver can also be built as a module.  If so, the module
 730           will be called sht15.
 731
 732 config SENSORS_S3C
 733         tristate "S3C24XX/S3C64XX Inbuilt ADC"
 734         depends on ARCH_S3C2410
 735         help
 736           If you say yes here you get support for the on-board ADCs of
 737           the Samsung S3C24XX or S3C64XX series of SoC
 738
 739           This driver can also be built as a module. If so, the module
 740           will be called s3c-hwmo.
 741
 742 config SENSORS_S3C_RAW
 743         bool "Include raw channel attributes in sysfs"
 744         depends on SENSORS_S3C
 745         help
 746           Say Y here if you want to include raw copies of all the ADC
 747           channels in sysfs.
 748
 749 config SENSORS_SIS5595
 750         tristate "Silicon Integrated Systems Corp. SiS5595"
 751         depends on PCI
 752         help
 753           If you say yes here you get support for the integrated sensors in
 754           SiS5595 South Bridges.
 755
 756           This driver can also be built as a module.  If so, the module
 757           will be called sis5595.
 758
 759 config SENSORS_SMM665
 760         tristate "Summit Microelectronics SMM665"
 761         depends on I2C && EXPERIMENTAL
 762         default n
 763         help
 764           If you say yes here you get support for the hardware monitoring
 765           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 766           Active DC Output Controller / Monitor.
 767
 768           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 769           Support for those chips is untested.
 770
 771           This driver can also be built as a module. If so, the module will
 772           be called smm665.
 773
 774 config SENSORS_DME1737
 775         tristate "SMSC DME1737, SCH311x and compatibles"
 776         depends on I2C && EXPERIMENTAL
 777         select HWMON_VID
 778         help
 779           If you say yes here you get support for the hardware monitoring
 780           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 781           Asus A8000 Super-I/O chips.
 782
 783           This driver can also be built as a module.  If so, the module
 784           will be called dme1737.
 785
 786 config SENSORS_EMC1403
 787         tristate "SMSC EMC1403 thermal sensor"
 788         depends on I2C
 789         help
 790           If you say yes here you get support for the SMSC EMC1403
 791           temperature monitoring chip.
 792
 793           Threshold values can be configured using sysfs.
 794           Data from the different diodes are accessible via sysfs.
 795
 796 config SENSORS_SMSC47M1
 797         tristate "SMSC LPC47M10x and compatibles"
 798         help
 799           If you say yes here you get support for the integrated fan
 800           monitoring and control capabilities of the SMSC LPC47B27x,
 801           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 802           LPC47M192, LPC47M292 and LPC47M997 chips.
 803
 804           The temperature and voltage sensor features of the LPC47M15x,
 805           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 806           driver, select also "SMSC LPC47M192 and compatibles" below for
 807           those.
 808
 809           This driver can also be built as a module.  If so, the module
 810           will be called smsc47m1.
 811
 812 config SENSORS_SMSC47M192
 813         tristate "SMSC LPC47M192 and compatibles"
 814         depends on I2C && EXPERIMENTAL
 815         select HWMON_VID
 816         help
 817           If you say yes here you get support for the temperature and
 818           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
 819           and LPC47M997 chips.
 820
 821           The fan monitoring and control capabilities of these chips
 822           are supported by another driver, select
 823           "SMSC LPC47M10x and compatibles" above. You need both drivers
 824           if you want fan control and voltage/temperature sensor support.
 825
 826           This driver can also be built as a module.  If so, the module
 827           will be called smsc47m192.
 828
 829 config SENSORS_SMSC47B397
 830         tristate "SMSC LPC47B397-NC"
 831         depends on EXPERIMENTAL
 832         help
 833           If you say yes here you get support for the SMSC LPC47B397-NC
 834           sensor chip.
 835
 836           This driver can also be built as a module.  If so, the module
 837           will be called smsc47b397.
 838
 839 config SENSORS_ADS7828
 840         tristate "Texas Instruments ADS7828"
 841         depends on I2C
 842         help
 843           If you say yes here you get support for Texas Instruments ADS7828
 844           12-bit 8-channel ADC device.
 845
 846           This driver can also be built as a module.  If so, the module
 847           will be called ads7828.
 848
 849 config SENSORS_ADS7871
 850         tristate "Texas Instruments ADS7871 A/D converter"
 851         depends on SPI
 852         help
 853           If you say yes here you get support for TI ADS7871 & ADS7870
 854
 855           This driver can also be built as a module.  If so, the module
 856           will be called ads7871.
 857
 858 config SENSORS_AMC6821
 859         tristate "Texas Instruments AMC6821"
 860         depends on I2C  && EXPERIMENTAL
 861         help
 862           If you say yes here you get support for the Texas Instruments
 863           AMC6821 hardware monitoring chips.
 864
 865           This driver can also be build as a module.  If so, the module
 866           will be called amc6821.
 867
 868 config SENSORS_THMC50
 869         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
 870         depends on I2C && EXPERIMENTAL
 871         help
 872           If you say yes here you get support for Texas Instruments THMC50
 873           sensor chips and clones: the Analog Devices ADM1022.
 874
 875           This driver can also be built as a module.  If so, the module
 876           will be called thmc50.
 877
 878 config SENSORS_TMP102
 879         tristate "Texas Instruments TMP102"
 880         depends on I2C && EXPERIMENTAL
 881         help
 882           If you say yes here you get support for Texas Instruments TMP102
 883           sensor chips.
 884
 885           This driver can also be built as a module.  If so, the module
 886           will be called tmp102.
 887
 888 config SENSORS_TMP401
 889         tristate "Texas Instruments TMP401 and compatibles"
 890         depends on I2C && EXPERIMENTAL
 891         help
 892           If you say yes here you get support for Texas Instruments TMP401 and
 893           TMP411 temperature sensor chips.
 894
 895           This driver can also be built as a module.  If so, the module
 896           will be called tmp401.
 897
 898 config SENSORS_TMP421
 899         tristate "Texas Instruments TMP421 and compatible"
 900         depends on I2C && EXPERIMENTAL
 901         help
 902           If you say yes here you get support for Texas Instruments TMP421,
 903           TMP422 and TMP423 temperature sensor chips.
 904
 905           This driver can also be built as a module.  If so, the module
 906           will be called tmp421.
 907
 908 config SENSORS_VIA_CPUTEMP
 909         tristate "VIA CPU temperature sensor"
 910         depends on X86
 911         help
 912           If you say yes here you get support for the temperature
 913           sensor inside your CPU. Supported are all known variants of
 914           the VIA C7 and Nano.
 915
 916 config SENSORS_VIA686A
 917         tristate "VIA686A"
 918         depends on PCI
 919         help
 920           If you say yes here you get support for the integrated sensors in
 921           Via 686A/B South Bridges.
 922
 923           This driver can also be built as a module.  If so, the module
 924           will be called via686a.
 925
 926 config SENSORS_VT1211
 927         tristate "VIA VT1211"
 928         depends on EXPERIMENTAL
 929         select HWMON_VID
 930         help
 931           If you say yes here then you get support for hardware monitoring
 932           features of the VIA VT1211 Super-I/O chip.
 933
 934           This driver can also be built as a module.  If so, the module
 935           will be called vt1211.
 936
 937 config SENSORS_VT8231
 938         tristate "VIA VT8231"
 939         depends on PCI
 940         select HWMON_VID
 941         help
 942           If you say yes here then you get support for the integrated sensors
 943           in the VIA VT8231 device.
 944
 945           This driver can also be built as a module.  If so, the module
 946           will be called vt8231.
 947
 948 config SENSORS_W83781D
 949         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 950         depends on I2C
 951         select HWMON_VID
 952         help
 953           If you say yes here you get support for the Winbond W8378x series
 954           of sensor chips: the W83781D, W83782D and W83783S, and the similar
 955           Asus AS99127F.
 956
 957           This driver can also be built as a module.  If so, the module
 958           will be called w83781d.
 959
 960 config SENSORS_W83791D
 961         tristate "Winbond W83791D"
 962         depends on I2C
 963         select HWMON_VID
 964         help
 965           If you say yes here you get support for the Winbond W83791D chip.
 966
 967           This driver can also be built as a module.  If so, the module
 968           will be called w83791d.
 969
 970 config SENSORS_W83792D
 971         tristate "Winbond W83792D"
 972         depends on I2C && EXPERIMENTAL
 973         help
 974           If you say yes here you get support for the Winbond W83792D chip.
 975
 976           This driver can also be built as a module.  If so, the module
 977           will be called w83792d.
 978
 979 config SENSORS_W83793
 980         tristate "Winbond W83793"
 981         depends on I2C && EXPERIMENTAL
 982         select HWMON_VID
 983         help
 984           If you say yes here you get support for the Winbond W83793
 985           hardware monitoring chip, including support for the integrated
 986           watchdog.
 987
 988           This driver can also be built as a module.  If so, the module
 989           will be called w83793.
 990
 991 config SENSORS_W83L785TS
 992         tristate "Winbond W83L785TS-S"
 993         depends on I2C && EXPERIMENTAL
 994         help
 995           If you say yes here you get support for the Winbond W83L785TS-S
 996           sensor chip, which is used on the Asus A7N8X, among other
 997           motherboards.
 998
 999           This driver can also be built as a module.  If so, the module
1000           will be called w83l785ts.
1001
1002 config SENSORS_W83L786NG
1003         tristate "Winbond W83L786NG, W83L786NR"
1004         depends on I2C && EXPERIMENTAL
1005         help
1006           If you say yes here you get support for the Winbond W83L786NG
1007           and W83L786NR sensor chips.
1008
1009           This driver can also be built as a module.  If so, the module
1010           will be called w83l786ng.
1011
1012 config SENSORS_W83627HF
1013         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1014         select HWMON_VID
1015         help
1016           If you say yes here you get support for the Winbond W836X7 series
1017           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1018           W83697HF.
1019
1020           This driver can also be built as a module.  If so, the module
1021           will be called w83627hf.
1022
1023 config SENSORS_W83627EHF
1024         tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
1025         select HWMON_VID
1026         help
1027           If you say yes here you get support for the hardware
1028           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1029
1030           This driver also supports the W83627EHG, which is the lead-free
1031           version of the W83627EHF, and the W83627DHG, which is a similar
1032           chip suited for specific Intel processors that use PECI such as
1033           the Core 2 Duo.
1034
1035           This driver also supports the W83667HG chip.
1036
1037           This driver can also be built as a module.  If so, the module
1038           will be called w83627ehf.
1039
1040 config SENSORS_WM831X
1041         tristate "WM831x PMICs"
1042         depends on MFD_WM831X
1043         help
1044           If you say yes here you get support for the hardware
1045           monitoring functionality of the Wolfson Microelectronics
1046           WM831x series of PMICs.
1047
1048           This driver can also be built as a module.  If so, the module
1049           will be called wm831x-hwmon.
1050
1051 config SENSORS_WM8350
1052         tristate "Wolfson Microelectronics WM835x"
1053         depends on MFD_WM8350
1054         help
1055           If you say yes here you get support for the hardware
1056           monitoring features of the WM835x series of PMICs.
1057
1058           This driver can also be built as a module.  If so, the module
1059           will be called wm8350-hwmon.
1060
1061 config SENSORS_ULTRA45
1062         tristate "Sun Ultra45 PIC16F747"
1063         depends on SPARC64
1064         help
1065           This driver provides support for the Ultra45 workstation environmental
1066           sensors.
1067
1068 config SENSORS_HDAPS
1069         tristate "IBM Hard Drive Active Protection System (hdaps)"
1070         depends on INPUT && X86
1071         select INPUT_POLLDEV
1072         default n
1073         help
1074           This driver provides support for the IBM Hard Drive Active Protection
1075           System (hdaps), which provides an accelerometer and other misc. data.
1076           ThinkPads starting with the R50, T41, and X40 are supported.  The
1077           accelerometer data is readable via sysfs.
1078
1079           This driver also provides an absolute input class device, allowing
1080           the laptop to act as a pinball machine-esque joystick.
1081
1082           If your ThinkPad is not recognized by the driver, please update to latest
1083           BIOS. This is especially the case for some R52 ThinkPads.
1084
1085           Say Y here if you have an applicable laptop and want to experience
1086           the awesome power of hdaps.
1087
1088 config SENSORS_LIS3_SPI
1089         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1090         depends on !ACPI && SPI_MASTER && INPUT
1091         select INPUT_POLLDEV
1092         default n
1093         help
1094           This driver provides support for the LIS3LV02Dx accelerometer connected
1095           via SPI. The accelerometer data is readable via
1096           /sys/devices/platform/lis3lv02d.
1097
1098           This driver also provides an absolute input class device, allowing
1099           the laptop to act as a pinball machine-esque joystick.
1100
1101           This driver can also be built as modules.  If so, the core module
1102           will be called lis3lv02d and a specific module for the SPI transport
1103           is called lis3lv02d_spi.
1104
1105 config SENSORS_LIS3_I2C
1106         tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1107         depends on I2C && INPUT
1108         select INPUT_POLLDEV
1109         default n
1110         help
1111           This driver provides support for the LIS3LV02Dx accelerometer connected
1112           via I2C. The accelerometer data is readable via
1113           /sys/devices/platform/lis3lv02d.
1114
1115           This driver also provides an absolute input class device, allowing
1116           the device to act as a pinball machine-esque joystick.
1117
1118           This driver can also be built as modules.  If so, the core module
1119           will be called lis3lv02d and a specific module for the I2C transport
1120           is called lis3lv02d_i2c.
1121
1122 config SENSORS_APPLESMC
1123         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1124         depends on INPUT && X86
1125         select NEW_LEDS
1126         select LEDS_CLASS
1127         select INPUT_POLLDEV
1128         default n
1129         help
1130           This driver provides support for the Apple System Management
1131           Controller, which provides an accelerometer (Apple Sudden Motion
1132           Sensor), light sensors, temperature sensors, keyboard backlight
1133           control and fan control.
1134
1135           Only Intel-based Apple's computers are supported (MacBook Pro,
1136           MacBook, MacMini).
1137
1138           Data from the different sensors, keyboard backlight control and fan
1139           control are accessible via sysfs.
1140
1141           This driver also provides an absolute input class device, allowing
1142           the laptop to act as a pinball machine-esque joystick.
1143
1144           Say Y here if you have an applicable laptop and want to experience
1145           the awesome power of applesmc.
1146
1147 config SENSORS_MC13783_ADC
1148         tristate "Freescale MC13783 ADC"
1149         depends on MFD_MC13783
1150         help
1151           Support for the A/D converter on MC13783 PMIC.
1152
1153 if ACPI
1154
1155 comment "ACPI drivers"
1156
1157 config SENSORS_ATK0110
1158         tristate "ASUS ATK0110"
1159         depends on X86 && EXPERIMENTAL
1160         help
1161           If you say yes here you get support for the ACPI hardware
1162           monitoring interface found in many ASUS motherboards. This
1163           driver will provide readings of fans, voltages and temperatures
1164           through the system firmware.
1165
1166           This driver can also be built as a module. If so, the module
1167           will be called asus_atk0110.
1168
1169 config SENSORS_LIS3LV02D
1170         tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1171         depends on INPUT
1172         select INPUT_POLLDEV
1173         select NEW_LEDS
1174         select LEDS_CLASS
1175         default n
1176         help
1177           This driver provides support for the LIS3* accelerometers, such as the
1178           LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1179           of HP laptops, which have the "Mobile Data Protection System 3D" or
1180           "3D DriveGuard" feature. On such systems the driver should load
1181           automatically (via ACPI alias). The accelerometer might also be found
1182           in other systems, connected via SPI or I2C. The accelerometer data is
1183           readable via /sys/devices/platform/lis3lv02d.
1184
1185           This driver also provides an absolute input class device, allowing
1186           a laptop to act as a pinball machine-esque joystick. It provides also
1187           a misc device which can be used to detect free-fall. On HP laptops,
1188           if the led infrastructure is activated, support for a led indicating
1189           disk protection will be provided as hp::hddprotect. For more
1190           information on the feature, refer to Documentation/hwmon/lis3lv02d.
1191
1192           This driver can also be built as modules.  If so, the core module
1193           will be called lis3lv02d and a specific module for HP laptops will be
1194           called hp_accel.
1195
1196           Say Y here if you have an applicable laptop and want to experience
1197           the awesome power of lis3lv02d.
1198
1199 endif # ACPI
1200
1201 endif # HWMON